| # Copyright 1992, 1994, 1996, 1997, 1998, 2001, 2003, 2007 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file was written by Michael Snyder (msnyder@cygnus.com) |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "setshow" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } { |
| untested setshow.exp |
| return -1 |
| } |
| |
| # Start with a fresh gdb |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| # make sure $pc is sane, in case we're talking to a board. |
| if { ![runto_main] } { |
| gdb_suppress_tests; |
| } |
| |
| # |
| # Test gdb set and show commands. |
| # Add tests here for show and set that don't fit neatly elsewhere. |
| # FIXME: many rudimentary tests for set and show commands have been |
| # added below, but most do nothing more than check that a |
| # variable has been set successfully, ie. they do not test |
| # whether setting the variable has had the desired effect. |
| # |
| |
| #test default annotation_level is 0 |
| gdb_test "show annotate" "Annotation_level is 0..*" "default annotation_level is zero" |
| |
| #test set annotate 2 |
| send_gdb "set annotate 2\n" |
| gdb_expect { |
| -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ |
| { pass "set annotate 2" } |
| -re ".*$gdb_prompt $" { fail "set annotate 2" } |
| timeout { fail "(timeout) set annotate 2" } |
| } |
| |
| send_gdb "show annotate\n" |
| gdb_expect { |
| -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ |
| { pass "show annotate (2)" } |
| -re ".*$gdb_prompt $" { fail "show annotate (2)" } |
| timeout { fail "(timeout) show annotate (2)" } |
| } |
| |
| #test annotation_level 2 |
| send_gdb "info line 1\n" |
| gdb_expect { |
| -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ |
| { pass "annotation_level 2" } |
| -re ".*$gdb_prompt $" { fail "annotation_level 2" } |
| timeout { fail "(timeout) annotation_level 2" } |
| } |
| |
| #test set annotate 1 |
| gdb_test "set annotate 1" ".*post-prompt.*" "set annotate 1" |
| gdb_test "show annotate" "Annotation_level is 1..*" "show annotate (1)" |
| #test annotation_level 1 |
| gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1" |
| #test set annotate 0 |
| gdb_test "set annotate 0" "" "set annotate 0" |
| gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)" |
| #test annotation_level 0 |
| gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0" |
| #test set args |
| gdb_test "set args foo bar blup baz bubble" "" "set args" |
| #test show args |
| gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args" |
| |
| # Don't test if we can't pass args or if we're using a stub. |
| if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } { |
| #test passing args |
| gdb_test "cont" "Continuing.*" "continuing" |
| delete_breakpoints |
| gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args" |
| } |
| #test set check range on |
| gdb_test "set check range on" "" "set check range on" |
| #test show check range on |
| gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" |
| #test set check range auto |
| gdb_test "set check range auto" "" "set check range auto" |
| #test show check range auto |
| gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" |
| #test set check type on |
| gdb_test "set check type on" "" "set check type on" |
| #test show check type on |
| gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" |
| #test set check type auto |
| gdb_test "set check type auto" "" "set check type auto" |
| #test show check type |
| gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" |
| #test set complaints 100 |
| gdb_test "set complaints 100" "" "set complaints 100" |
| #test show complaints 100 |
| gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" |
| #test set complaints 0 |
| gdb_test "set complaints 0" "" "set complaints 0" |
| #test show complaints 0 |
| gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" |
| #test set confirm off |
| gdb_test "set confirm off" "" "set confirm off" |
| #test show confirm off |
| gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" |
| #test set confirm on |
| gdb_test "set confirm on" "" "set confirm on" |
| #test show confirm on |
| gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" |
| #test set editing off |
| gdb_test "set editing off" "" "set editing off" |
| #test show editing off |
| gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" |
| #test set editing on |
| #gdb_test "set editing on" "" "set editing on" |
| #test show editing on |
| #gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" |
| #test set environment FOOBARBAZ |
| gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" "" "set environment FOOBARBAZ" |
| #test show environment FOOBARBAZ |
| gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ" |
| #test set height 100 |
| gdb_test "set height 100" "" "set height 100" |
| #test show height 100 |
| gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" |
| # back to infinite height to avoid pagers |
| gdb_test "set height 0" "" "" |
| #test set history expansion on |
| gdb_test "set history expansion on" "" "set history expansion on" |
| #test show history expansion on |
| gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" |
| #test set history filename foobar.baz |
| gdb_test "set history filename foobar.baz" "" "set history filename foobar.baz" |
| #test show history filename foobar.baz |
| gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)" |
| #test set history save on |
| gdb_test "set history save on" "" "set history save on" |
| #test show history save on |
| gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)" |
| #test set history size 100 |
| gdb_test "set history size 100" "" "set history size 100" |
| #test show history size 100 |
| gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" |
| #test set language asm |
| gdb_test "set language asm" "" "set language asm" |
| #test show language asm |
| gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" |
| #test set language auto |
| gdb_test "set language auto" "" "set language auto" |
| #test show language |
| gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" |
| #test set listsize 100 |
| gdb_test "set listsize 100" "" "set listsize 100" |
| #test show listsize 100 |
| gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" |
| |
| if ![board_info target exists gdb_prompt] { |
| #test set prompt (FooBarBaz) |
| set newprompt "\\(FooBarBaz\\)" |
| send_gdb "set prompt (FooBarBaz) \n" |
| gdb_expect { |
| -re "$newprompt $" { pass "set prompt (FooBarBaz) " } |
| timeout { fail "(timeout) set prompt (FooBarBaz) " } |
| } |
| |
| #test show prompt (FooBarBaz) |
| send_gdb "show prompt\n" |
| gdb_expect { |
| -re "Gdb's prompt is \"$newprompt \"..* $" \ |
| { pass "show prompt (FooBarBaz) " } |
| timeout { fail "(timeout) show prompt (FooBarBaz) " } |
| } |
| |
| #test set prompt (gdb) |
| send_gdb "set prompt (gdb) \n" |
| gdb_expect { |
| -re "$gdb_prompt $" { pass "set prompt (gdb) " } |
| timeout { fail "(timeout) set prompt (gdb) " } |
| } |
| } |
| |
| #test set radix 11 |
| gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*" "set radix 11" |
| #test set radix 16 |
| gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*" "set radix 16" |
| #test show radix 16 |
| gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*" "show radix (16)" |
| #test set radix 10 |
| gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*" "set radix 10" |
| #test show radix 10 |
| gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" |
| #test set width 90 |
| gdb_test "set width 90" "" "set width 90" |
| #test show width 90 |
| gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" |
| #test set write on |
| # This is only supported on targets which use exec.o. |
| gdb_test "set write on" "" "set write on" |
| #test show write on |
| # This is only supported on targets which use exec.o. |
| gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" |
| #test set symbol-reloading on |
| gdb_test "set symbol-reloading on" "" "set symbol-reloading on" |
| #test show symbol-reloading on |
| gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" |
| #test show user |
| gdb_test "show user" "" "show user" |
| #test set verbose on |
| gdb_test "set verbose on" "" "set verbose on" |
| #test show verbose on |
| gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" |
| #test set verbose off |
| gdb_test "set verbose off" "" "set verbose off" |
| #test show verbose off |
| gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" |