| # Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1997, 1998, 1999, 2000, |
| # 2001, 2002, 2003, 2005, 2006 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| # |
| # test special commands (if, while, etc) |
| # |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "run" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/commands |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } { |
| untested commands.exp |
| return -1 |
| } |
| |
| gdb_exit |
| gdb_start |
| delete_breakpoints |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| proc gdbvar_simple_if_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2" |
| } |
| |
| proc gdbvar_simple_while_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test" |
| # This test should print 0xfeedface five times. |
| gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "gdbvar_simple_while_test #1" |
| } |
| |
| proc gdbvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "gdbvar_complex_if_while_test #1" |
| } |
| |
| proc progvar_simple_if_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #1" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" \ |
| "progvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_simple_if_test #2" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_simple_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_while_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 5" "" "set args in progvar_simple_while_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #2" |
| # This test should print 0xfeedface five times. |
| gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_simple_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_while_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 4" "" "set args in progvar_complex_if_while_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=4" "" "set value to 4 in progvar_simple_if_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_complex_if_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc if_while_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping if_while_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 5" "" "set args in if_while_breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1" |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "End with" { |
| pass "commands in if_while_breakpoint_command_test" |
| } |
| default { |
| fail "(timeout or eof) commands in if_while_breakpoint_command_test" |
| } |
| } |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \ |
| "" \ |
| "commands part 2 in if_while_breakpoint_command_test" |
| gdb_test "continue" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "if_while_breakpoint_command_test #1" |
| gdb_test "info break" \ |
| "while.*set.*if.*p/x.*else.*p/x.*end.*" \ |
| "info break in if_while_breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test that we can run the inferior from breakpoint commands. |
| # |
| # The expected behavior is that all commands after the first "step" |
| # shall be ignored. See the gdb manual, "Break Commands", |
| # subsection "Breakpoint command lists". |
| |
| proc infrun_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping infrun_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 6" "" "set args in infrun_breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #1" |
| delete_breakpoints |
| gdb_test "break factorial if value == 5" "Breakpoint.*at.*" |
| |
| # infrun_breakpoint_command_test - This test was broken into two parts |
| # to get around a synchronization problem in expect. |
| # part1: issue the gdb command "commands" |
| # part2: send the list of commands |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "End with" { |
| pass "commands in infrun_breakpoint_command_test #1" |
| } |
| default { |
| fail "(timeout or eof) commands in infrun_breakpoint_command_test" |
| } |
| } |
| gdb_test "step\nstep\nstep\nstep\nend" "" \ |
| "commands in infrun_breakpoint_command_test #2" |
| |
| gdb_test "continue" \ |
| "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \ |
| "continue in infrun_breakpoint_command_test" |
| |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 6" "" "set args in breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #2" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2" |
| gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \ |
| "End with.*" "commands in breakpoint_command_test" |
| gdb_test "continue" \ |
| "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \ |
| "continue in breakpoint_command_test" |
| gdb_test "print value" " = 5" "print value in breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test a simple user defined command (with arguments) |
| proc user_defined_command_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 4" "" "set foo in user_defined_command_test" |
| |
| send_gdb "define mycommand\n" |
| gdb_expect { |
| -re "End with" { |
| pass "define mycommand in user_defined_command_test" |
| } |
| default { |
| fail "(timeout or eof) define mycommand in user_defined_command_test" |
| } |
| } |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \ |
| "" \ |
| "enter commands in user_defined_command_test" |
| |
| gdb_test "mycommand \$foo" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "execute user defined command in user_defined_command_test" |
| gdb_test "show user mycommand" \ |
| " while \\\$arg0.*set.* if \\\(\\\$arg0.*p/x.* else\[^\n\].*p/x.* end\[^\n\].* end\[^\n\].*" \ |
| "display user command in user_defined_command_test" |
| } |
| |
| proc watchpoint_command_test {} { |
| global noargs |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping watchpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 6" "" "set args in watchpoint_command_test" |
| if { ![runto factorial] } then { return } |
| delete_breakpoints |
| |
| # Verify that we can create a watchpoint, and give it a commands |
| # list that continues the inferior. We set the watchpoint on a |
| # local variable, too, so that it self-deletes when the watched |
| # data goes out of scope. |
| # |
| # What should happen is: Each time the watchpoint triggers, it |
| # continues the inferior. Eventually, the watchpoint will self- |
| # delete, when the watched variable is out of scope. But by that |
| # time, the inferior should have exited. GDB shouldn't crash or |
| # anything untoward as a result of this. |
| # |
| set wp_id -1 |
| |
| send_gdb "watch local_var\n" |
| gdb_expect { |
| -re ".*\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $" { |
| set wp_id $expect_out(1,string) |
| pass "watch local_var" |
| } |
| -re "$gdb_prompt $"\ |
| {fail "watch local_var"} |
| timeout {fail "(timeout) watch local_var"} |
| } |
| |
| if {$wp_id == -1} {return} |
| |
| send_gdb "commands $wp_id\n" |
| gdb_expect { |
| -re "Type commands for when breakpoint $wp_id is hit, one per line.*>" { |
| pass "begin commands on watch" |
| } |
| -re "$gdb_prompt $" {fail "begin commands on watch"} |
| timeout {fail "(timeout) begin commands on watch"} |
| } |
| send_gdb "print value\n" |
| gdb_expect { |
| -re ">" {pass "add print command to watch"} |
| -re "$gdb_prompt $" {fail "add print command to watch"} |
| timeout {fail "(timeout) add print command to watch"} |
| } |
| send_gdb "continue\n" |
| gdb_expect { |
| -re ">" {pass "add continue command to watch"} |
| -re "$gdb_prompt $" {fail "add continue command to watch"} |
| timeout {fail "(timeout) add continue command to watch"} |
| } |
| send_gdb "end\n" |
| gdb_expect { |
| -re "$gdb_prompt $" {pass "end commands on watch"} |
| timeout {fail "(timeout) end commands on watch"} |
| } |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:(57|82).*$gdb_prompt $" { |
| pass "continue with watch" |
| } |
| -re "$gdb_prompt $" {fail "continue with watch"} |
| timeout {fail "(timeout) continue with watch"} |
| } |
| } |
| |
| proc test_command_prompt_position {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping test_command_prompt_position because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3" |
| gdb_test "p value=5" "" "set value to 5 in test_command_prompt_position" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" \ |
| "if test in test_command_prompt_position" |
| |
| # Now let's test for the correct position of the '>' in gdb's |
| # prompt for commands. It should be at the beginning of the line, |
| # and not after one space. |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "Type commands.*End with.*\[\r\n\]>$" { |
| send_gdb "printf \"Now the value is %d\\n\", value\n" |
| gdb_expect { |
| -re "^printf.*value\r\n>$" { |
| send_gdb "end\n" |
| gdb_expect { |
| -re "^end\r\n$gdb_prompt $" { |
| pass "> OK in test_command_prompt_position" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "some other message in test_command_prompt_position" |
| } |
| timeout { |
| fail "(timeout) 1 in test_command_prompt_position" |
| } |
| } |
| } |
| -re "^ >$" { fail "> not OK in test_command_prompt_position" } |
| -re ".*$gdb_prompt $" { |
| fail "wrong message in test_command_prompt_position" |
| } |
| timeout { |
| fail "(timeout) 2 in test_command_prompt_position " |
| } |
| } |
| } |
| -re "Type commands.*End with.*\[\r\n\] >$" { |
| fail "prompt not OK in test_command_prompt_position" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "commands in test_command_prompt_position" |
| } |
| timeout { fail "(timeout) 3 commands in test_command_prompt_position" } |
| } |
| |
| gdb_stop_suppressing_tests; |
| } |
| |
| |
| |
| proc deprecated_command_test {} { |
| gdb_test "maintenance deprecate blah" "Can't find command.*" \ |
| "tried to deprecate non-existing command" |
| |
| gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /1/" |
| gdb_test "p 5" \ |
| "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \ |
| "p deprecated warning, with replacement" |
| gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/" |
| |
| gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /2/" |
| gdb_test "maintenance deprecate print \"new_print\"" "" |
| gdb_test "p 5" \ |
| "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \ |
| "both alias and command are deprecated" |
| gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/" |
| |
| gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " \ |
| "" \ |
| "deprecate long command /1/" |
| gdb_test "set remote memory-read-packet-size" \ |
| "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \ |
| "long command deprecated /1/" |
| |
| gdb_test "maintenance deprecate set remote memory-read-packet-size" \ |
| "" \ |
| "deprecate long command /2/" |
| gdb_test "set remote memory-read-packet-size" \ |
| "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \ |
| "long command deprecated with no alternative /2/" |
| |
| gdb_test "maintenance deprecate" \ |
| "\"maintenance deprecate\".*" \ |
| "deprecate with no arguments" |
| } |
| |
| proc bp_deleted_in_command_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping bp_deleted_in_command_test because of noargs." |
| return |
| } |
| |
| gdb_test "set args 1" "" "set args in bp_deleted_in_command_test" |
| delete_breakpoints |
| |
| # Create a breakpoint, and associate a command-list to it, with |
| # one command that deletes this breakpoint. |
| gdb_test "break factorial" \ |
| "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \ |
| "breakpoint in bp_deleted_in_command_test" |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "Type commands for when breakpoint .* is hit, one per line.*>" { |
| pass "begin commands in bp_deleted_in_command_test" |
| } |
| -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"} |
| timeout {fail "(timeout) begin commands bp_deleted_in_command_test"} |
| } |
| send_gdb "silent\n" |
| gdb_expect { |
| -re ">" {pass "add silent command"} |
| -re "$gdb_prompt $" {fail "add silent command"} |
| timeout {fail "(timeout) add silent command"} |
| } |
| send_gdb "clear factorial\n" |
| gdb_expect { |
| -re ">" {pass "add clear command"} |
| -re "$gdb_prompt $" {fail "add clear command"} |
| timeout {fail "(timeout) add clear command"} } |
| send_gdb "printf \"factorial command-list executed\\n\"\n" |
| gdb_expect { |
| -re ">" {pass "add printf command"} |
| -re "$gdb_prompt $" {fail "add printf command"} |
| timeout {fail "(timeout) add printf command"} |
| } |
| send_gdb "cont\n" |
| gdb_expect { |
| -re ">" {pass "add cont command"} |
| -re "$gdb_prompt $" {fail "add cont command"} |
| timeout {fail "(timeout) add cont command"} } |
| send_gdb "end\n" |
| gdb_expect { |
| -re "$gdb_prompt $" {pass "end commands"} |
| timeout {fail "(timeout) end commands"} |
| } |
| |
| gdb_run_cmd |
| gdb_expect { |
| -re ".*factorial command-list executed.*1.*$gdb_prompt $" { |
| pass "run factorial until breakpoint" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "run factorial until breakpoint" |
| } |
| default { fail "(timeout) run factorial until breakpoint" } |
| timeout { fail "(timeout) run factorial until breakpoint" } |
| } |
| } |
| |
| proc temporary_breakpoint_commands {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping temporary_breakpoint_commands because of noargs." |
| return |
| } |
| |
| gdb_test "set args 1" "" "set args in temporary_breakpoint_commands" |
| delete_breakpoints |
| |
| # Create a temporary breakpoint, and associate a commands list to it. |
| # This test will verify that this commands list is executed when the |
| # breakpoint is hit. |
| gdb_test "tbreak factorial" \ |
| "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \ |
| "breakpoint in temporary_breakpoint_commands" |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "Type commands for when breakpoint .* is hit, one per line.*>" { |
| pass "begin commands in bp_deleted_in_command_test" |
| } |
| -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"} |
| timeout {fail "(timeout) begin commands bp_deleted_in_command_test"} |
| } |
| send_gdb "silent\n" |
| gdb_expect { |
| -re ">" {pass "add silent tbreak command"} |
| -re "$gdb_prompt $" {fail "add silent tbreak command"} |
| timeout {fail "(timeout) add silent tbreak command"} |
| } |
| send_gdb "printf \"factorial tbreak commands executed\\n\"\n" |
| gdb_expect { |
| -re ">" {pass "add printf tbreak command"} |
| -re "$gdb_prompt $" {fail "add printf tbreak command"} |
| timeout {fail "(timeout) add printf tbreak command"} |
| } |
| send_gdb "cont\n" |
| gdb_expect { |
| -re ">" {pass "add cont tbreak command"} |
| -re "$gdb_prompt $" {fail "add cont tbreak command"} |
| timeout {fail "(timeout) add cont tbreak command"} } |
| send_gdb "end\n" |
| gdb_expect { |
| -re "$gdb_prompt $" {pass "end tbreak commands"} |
| timeout {fail "(timeout) end tbreak commands"} |
| } |
| |
| gdb_run_cmd |
| gdb_expect { |
| -re ".*factorial tbreak commands executed.*1.*$gdb_prompt $" { |
| pass "run factorial until temporary breakpoint" |
| } |
| timeout { fail "(timeout) run factorial until temporary breakpoint" } |
| } |
| } |
| |
| # Test that GDB can handle $arg0 outside of user functions without |
| # crashing. |
| proc stray_arg0_test { } { |
| gdb_test "print \$arg0" \ |
| "\\\$\[0-9\]* = void" \ |
| "stray_arg0_test #1" |
| |
| gdb_test "if 1 == 1\nprint \$arg0\nend" \ |
| "\\\$\[0-9\]* = void" \ |
| "stray_arg0_test #2" |
| |
| gdb_test "print \$arg0 = 1" \ |
| "\\\$\[0-9\]* = 1" \ |
| "stray_arg0_test #3" |
| |
| gdb_test "print \$arg0" \ |
| "\\\$\[0-9\]* = 1" \ |
| "stray_arg0_test #4" |
| } |
| |
| # Test that GDB can handle arguments when sourcing files recursively. |
| # If the arguments are overwritten with ####### then the test has failed. |
| proc recursive_source_test {} { |
| set fd [open "file1" w] |
| puts $fd \ |
| {source file2 |
| abcdef qwerty} |
| close $fd |
| |
| set fd [open "file2" w] |
| puts $fd \ |
| {define abcdef |
| echo 1: <<<$arg0>>>\n |
| source file3 |
| echo 2: <<<$arg0>>>\n |
| end} |
| close $fd |
| |
| set fd [open "file3" w] |
| puts $fd \ |
| "echo in file3\\n |
| #################################################################" |
| close $fd |
| |
| gdb_test "source file1" \ |
| "1: <<<qwerty>>>\[\r\n]+in file3\[\r\n]+2: <<<qwerty>>>" \ |
| "recursive source test" |
| |
| file delete file1 |
| file delete file2 |
| file delete file3 |
| } |
| |
| gdbvar_simple_if_test |
| gdbvar_simple_while_test |
| gdbvar_complex_if_while_test |
| progvar_simple_if_test |
| progvar_simple_while_test |
| progvar_complex_if_while_test |
| if_while_breakpoint_command_test |
| infrun_breakpoint_command_test |
| breakpoint_command_test |
| user_defined_command_test |
| watchpoint_command_test |
| test_command_prompt_position |
| deprecated_command_test |
| bp_deleted_in_command_test |
| temporary_breakpoint_commands |
| stray_arg0_test |
| recursive_source_test |