| # Makefile.in generated by automake 1.9.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = .. |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = doc |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \ |
| $(top_srcdir)/../bfd/warning.m4 \ |
| $(top_srcdir)/../config/depstand.m4 \ |
| $(top_srcdir)/../config/extensions.m4 \ |
| $(top_srcdir)/../config/gettext-sister.m4 \ |
| $(top_srcdir)/../config/iconv.m4 \ |
| $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/lib-ld.m4 \ |
| $(top_srcdir)/../config/lib-link.m4 \ |
| $(top_srcdir)/../config/lib-prefix.m4 \ |
| $(top_srcdir)/../config/nls.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/po.m4 \ |
| $(top_srcdir)/../config/proginstall.m4 \ |
| $(top_srcdir)/../config/progtest.m4 \ |
| $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
| $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
| $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| depcomp = |
| am__depfiles_maybe = |
| SOURCES = |
| INFO_DEPS = binutils.info |
| TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex |
| am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo |
| DVIS = binutils.dvi |
| PDFS = binutils.pdf |
| PSS = binutils.ps |
| HTMLS = binutils.html |
| TEXINFOS = binutils.texi |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| MAKEINFOHTML = $(MAKEINFO) --html |
| AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) |
| DVIPS = dvips |
| man1dir = $(mandir)/man1 |
| am__installdirs = "$(DESTDIR)$(man1dir)" |
| NROFF = nroff |
| MANS = $(man_MANS) |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BUILD_DLLTOOL = @BUILD_DLLTOOL@ |
| BUILD_DLLWRAP = @BUILD_DLLWRAP@ |
| BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@ |
| BUILD_MISC = @BUILD_MISC@ |
| BUILD_NLMCONV = @BUILD_NLMCONV@ |
| BUILD_SRCONV = @BUILD_SRCONV@ |
| BUILD_WINDMC = @BUILD_WINDMC@ |
| BUILD_WINDRES = @BUILD_WINDRES@ |
| CATALOGS = @CATALOGS@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DATADIRNAME = @DATADIRNAME@ |
| DEFS = @DEFS@ |
| DEMANGLER_NAME = @DEMANGLER_NAME@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL_DEFS = @DLLTOOL_DEFS@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EMULATION = @EMULATION@ |
| EMULATION_VECTOR = @EMULATION_VECTOR@ |
| EXEEXT = @EXEEXT@ |
| EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ |
| FGREP = @FGREP@ |
| GENCAT = @GENCAT@ |
| GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@ |
| GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@ |
| GMSGFMT = @GMSGFMT@ |
| GREP = @GREP@ |
| HDEFINES = @HDEFINES@ |
| INCINTL = @INCINTL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LEX = @LEX@ |
| LEXLIB = @LEXLIB@ |
| LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBINTL_DEP = @LIBINTL_DEP@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| MKINSTALLDIRS = @MKINSTALLDIRS@ |
| MSGFMT = @MSGFMT@ |
| MSGMERGE = @MSGMERGE@ |
| NLMCONV_DEFS = @NLMCONV_DEFS@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NO_WERROR = @NO_WERROR@ |
| OBJDUMP = @OBJDUMP@ |
| OBJDUMP_DEFS = @OBJDUMP_DEFS@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| WARN_CFLAGS = @WARN_CFLAGS@ |
| XGETTEXT = @XGETTEXT@ |
| YACC = @YACC@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_LIPO = @ac_ct_LIPO@ |
| ac_ct_NMEDIT = @ac_ct_NMEDIT@ |
| ac_ct_OBJDUMP = @ac_ct_OBJDUMP@ |
| ac_ct_OTOOL = @ac_ct_OTOOL@ |
| ac_ct_OTOOL64 = @ac_ct_OTOOL64@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| AUTOMAKE_OPTIONS = cygnus |
| |
| # What version of the manual you want; "all" includes everything |
| CONFIG = all |
| |
| # Options to extract the man page from as.texinfo |
| MANCONF = -Dman |
| TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS) |
| POD2MAN = pod2man --center="GNU Development Tools" \ |
| --release="binutils-$(VERSION)" --section=1 |
| |
| |
| # List of man pages generated from binutils.texi |
| man_MANS = \ |
| addr2line.1 \ |
| ar.1 \ |
| dlltool.1 \ |
| nlmconv.1 \ |
| nm.1 \ |
| objcopy.1 \ |
| objdump.1 \ |
| ranlib.1 \ |
| readelf.1 \ |
| size.1 \ |
| strings.1 \ |
| strip.1 \ |
| windres.1 \ |
| windmc.1 \ |
| $(DEMANGLER_NAME).1 |
| |
| info_TEXINFOS = binutils.texi |
| binutils_TEXI = $(srcdir)/binutils.texi |
| AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \ |
| -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc |
| |
| TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \ |
| -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc |
| |
| MOSTLYCLEANFILES = $(DEMANGLER_NAME).1 |
| html__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| MAINTAINERCLEANFILES = binutils.info |
| |
| # Automake 1.9 will only build info files in the objdir if they are |
| # mentioned in DISTCLEANFILES. It doesn't have to be unconditional, |
| # though, so we use a bogus condition. |
| @GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info |
| all: all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .dvi .ps |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign doc/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| |
| binutils.info: binutils.texi |
| restore=: && backupdir="$(am__leading_dot)am$$$$" && \ |
| rm -rf $$backupdir && mkdir $$backupdir && \ |
| if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ |
| for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ |
| if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ |
| done; \ |
| else :; fi && \ |
| if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \ |
| then \ |
| rc=0; \ |
| else \ |
| rc=$$?; \ |
| $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ |
| fi; \ |
| rm -rf $$backupdir; exit $$rc |
| |
| binutils.dvi: binutils.texi |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi |
| |
| binutils.pdf: binutils.texi |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi |
| |
| binutils.html: binutils.texi |
| rm -rf $(@:.html=.htp) |
| if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \ |
| then \ |
| rm -rf $@; \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ |
| else \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ |
| exit 1; \ |
| fi |
| .dvi.ps: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| $(DVIPS) -o $@ $< |
| |
| uninstall-info-am: |
| @$(PRE_UNINSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if cd "$(DESTDIR)$(infodir)"; then \ |
| echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| case $$base in \ |
| $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| for file in $$d/$$base*; do \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f $(distdir)/$$relfile || \ |
| cp -p $$file $(distdir)/$$relfile; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -rf binutils.aux binutils.cp binutils.cps binutils.fn binutils.fns \ |
| binutils.ky binutils.log binutils.pg binutils.pgs \ |
| binutils.tmp binutils.toc binutils.tp binutils.tps \ |
| binutils.vr binutils.vrs binutils.dvi binutils.pdf \ |
| binutils.ps binutils.html |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| |
| clean-info: mostlyclean-aminfo |
| install-man1: $(man1_MANS) $(man_MANS) |
| @$(NORMAL_INSTALL) |
| test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ |
| else file=$$i; fi; \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| tags: TAGS |
| TAGS: |
| |
| ctags: CTAGS |
| CTAGS: |
| |
| check-am: |
| check: check-am |
| all-am: Makefile $(MANS) |
| installdirs: |
| for dir in "$(DESTDIR)$(man1dir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool |
| |
| dvi: dvi-am |
| |
| dvi-am: $(DVIS) |
| |
| html: html-am |
| |
| html-am: $(HTMLS) |
| |
| info: info-am |
| |
| info-am: $(INFO_DEPS) info-local |
| |
| install-data-am: install-data-local install-man |
| |
| install-exec-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ |
| echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ |
| else : ; fi; \ |
| done; \ |
| done |
| @$(POST_INSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ |
| install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ |
| done; \ |
| else : ; fi |
| install-man: install-man1 |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-am |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-man |
| |
| uninstall-man: uninstall-man1 |
| |
| .PHONY: all all-am check check-am clean clean-generic clean-info \ |
| clean-libtool dist-info distclean distclean-generic \ |
| distclean-libtool dvi dvi-am html html-am info info-am \ |
| info-local install install-am install-data install-data-am \ |
| install-data-local install-exec install-exec-am install-info \ |
| install-info-am install-man install-man1 install-strip \ |
| installcheck installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-aminfo maintainer-clean-generic mostlyclean \ |
| mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \ |
| pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \ |
| uninstall-man uninstall-man1 |
| |
| |
| # Man page generation from texinfo |
| addr2line.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod |
| -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f addr2line.pod |
| |
| ar.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod |
| -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f ar.pod |
| |
| dlltool.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod |
| -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f dlltool.pod |
| |
| nlmconv.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod |
| -($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f nlmconv.pod |
| |
| nm.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod |
| -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f nm.pod |
| |
| objcopy.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod |
| -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f objcopy.pod |
| |
| objdump.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod |
| -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f objdump.pod |
| |
| ranlib.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod |
| -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f ranlib.pod |
| |
| readelf.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod |
| -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f readelf.pod |
| |
| size.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod |
| -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f size.pod |
| |
| strings.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod |
| -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f strings.pod |
| |
| strip.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod |
| -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f strip.pod |
| |
| windres.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod |
| -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f windres.pod |
| |
| windmc.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod |
| -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f windmc.pod |
| |
| cxxfilt.man: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod |
| -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f $(DEMANGLER_NAME).pod |
| |
| $(DEMANGLER_NAME).1: cxxfilt.man Makefile |
| if test -f cxxfilt.man; then \ |
| man=cxxfilt.man; \ |
| else \ |
| man=$(srcdir)/cxxfilt.man; \ |
| fi; \ |
| sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \ |
| -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \ |
| > $(DEMANGLER_NAME).1 |
| |
| # We want install to imply install-info as per GNU standards, despite the |
| # cygnus option. |
| install-data-local: install-info |
| |
| install-html: install-html-am |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" |
| @list='$(HTMLS)'; for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \ |
| f=$(html__strip_dir) \ |
| if test -d "$$d$$p"; then \ |
| echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ |
| else \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ |
| fi; \ |
| done |
| |
| # Maintenance |
| |
| # We need it for the taz target in ../../Makefile.in. |
| info-local: $(MANS) |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |