| dnl Process this file with autoconf to produce a configure script. |
| dnl |
| |
| AC_PREREQ(2.13) |
| AC_INIT(z8k-dis.c) |
| |
| AC_CANONICAL_SYSTEM |
| AC_ISC_POSIX |
| |
| # We currently only use the version number for the name of any shared |
| # library. For user convenience, we always use the same version |
| # number that BFD is using. |
| changequote(,)dnl |
| BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` |
| changequote([,])dnl |
| |
| AM_INIT_AUTOMAKE(opcodes, ${BFD_VERSION}) |
| |
| dnl These must be called before AM_PROG_LIBTOOL, because it may want |
| dnl to call AC_CHECK_PROG. |
| AC_CHECK_TOOL(AR, ar) |
| AC_CHECK_TOOL(RANLIB, ranlib, :) |
| |
| dnl Default to a non shared library. This may be overridden by the |
| dnl configure option --enable-shared. |
| AM_DISABLE_SHARED |
| |
| AM_PROG_LIBTOOL |
| |
| AC_ARG_ENABLE(targets, |
| [ --enable-targets alternative target configurations], |
| [case "${enableval}" in |
| yes | "") AC_ERROR(enable-targets option must specify target names or 'all') |
| ;; |
| no) enable_targets= ;; |
| *) enable_targets=$enableval ;; |
| esac])dnl |
| AC_ARG_ENABLE(commonbfdlib, |
| [ --enable-commonbfdlib build shared BFD/opcodes/libiberty library], |
| [case "${enableval}" in |
| yes) commonbfdlib=true ;; |
| no) commonbfdlib=false ;; |
| *) AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;; |
| esac])dnl |
| |
| build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" |
| AC_ARG_ENABLE(build-warnings, |
| [ --enable-build-warnings Enable build-time compiler warnings if gcc is used], |
| [case "${enableval}" in |
| yes) ;; |
| no) build_warnings="-w";; |
| ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` |
| build_warnings="${build_warnings} ${t}";; |
| *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` |
| build_warnings="${t} ${build_warnings}";; |
| *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; |
| esac |
| if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then |
| echo "Setting warning flags = $build_warnings" 6>&1 |
| fi])dnl |
| WARN_CFLAGS="" |
| if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then |
| WARN_CFLAGS="${build_warnings}" |
| fi |
| AC_SUBST(WARN_CFLAGS) |
| |
| AM_CONFIG_HEADER(config.h:config.in) |
| |
| if test -z "$target" ; then |
| AC_MSG_ERROR(Unrecognized target system type; please check config.sub.) |
| fi |
| |
| AM_MAINTAINER_MODE |
| AM_INSTALL_LIBBFD |
| AC_EXEEXT |
| |
| # host-specific stuff: |
| |
| AC_PROG_CC |
| |
| ALL_LINGUAS="fr sv tr es da de id pt_BR ro nl" |
| CY_GNU_GETTEXT |
| |
| . ${srcdir}/../bfd/configure.host |
| |
| BFD_CC_FOR_BUILD |
| |
| AC_SUBST(HDEFINES) |
| AC_PROG_INSTALL |
| |
| AC_CHECK_HEADERS(string.h strings.h stdlib.h) |
| |
| cgen_maint=no |
| cgendir='$(srcdir)/../cgen' |
| |
| AC_ARG_ENABLE(cgen-maint, |
| [ --enable-cgen-maint[=dir] build cgen generated files], |
| [case "${enableval}" in |
| yes) cgen_maint=yes ;; |
| no) cgen_maint=no ;; |
| *) |
| # argument is cgen install directory (not implemented yet). |
| # Having a `share' directory might be more appropriate for the .scm, |
| # .cpu, etc. files. |
| cgen_maint=yes |
| cgendir=${cgen_maint}/lib/cgen |
| ;; |
| esac])dnl |
| AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} = xyes) |
| AC_SUBST(cgendir) |
| |
| using_cgen=no |
| |
| # Horrible hacks to build DLLs on Windows. |
| WIN32LDFLAGS= |
| WIN32LIBADD= |
| case "${host}" in |
| *-*-cygwin*) |
| if test "$enable_shared" = "yes"; then |
| WIN32LDFLAGS="-no-undefined" |
| WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin" |
| fi |
| ;; |
| esac |
| AC_SUBST(WIN32LDFLAGS) |
| AC_SUBST(WIN32LIBADD) |
| |
| # target-specific stuff: |
| |
| # Canonicalize the secondary target names. |
| if test -n "$enable_targets" ; then |
| for targ in `echo $enable_targets | sed 's/,/ /g'` |
| do |
| result=`$ac_config_sub $targ 2>/dev/null` |
| if test -n "$result" ; then |
| canon_targets="$canon_targets $result" |
| else |
| # Allow targets that config.sub doesn't recognize, like "all". |
| canon_targets="$canon_targets $targ" |
| fi |
| done |
| fi |
| |
| all_targets=false |
| selarchs= |
| for targ in $target $canon_targets |
| do |
| if test "x$targ" = "xall" ; then |
| all_targets=true |
| else |
| . $srcdir/../bfd/config.bfd |
| selarchs="$selarchs $targ_archs" |
| fi |
| done |
| |
| # Utility var, documents generic cgen support files. |
| |
| cgen_files="cgen-opc.lo cgen-asm.lo cgen-dis.lo" |
| |
| # We don't do any links based on the target system, just makefile config. |
| |
| if test x${all_targets} = xfalse ; then |
| |
| # Target architecture .o files. |
| ta= |
| |
| for arch in $selarchs |
| do |
| ad=`echo $arch | sed -e s/bfd_//g -e s/_arch//g` |
| archdefs="$archdefs -DARCH_$ad" |
| case "$arch" in |
| bfd_a29k_arch) ta="$ta a29k-dis.lo" ;; |
| bfd_alliant_arch) ;; |
| bfd_alpha_arch) ta="$ta alpha-dis.lo alpha-opc.lo" ;; |
| bfd_arc_arch) ta="$ta arc-dis.lo arc-opc.lo arc-ext.lo" ;; |
| bfd_arm_arch) ta="$ta arm-dis.lo" ;; |
| bfd_avr_arch) ta="$ta avr-dis.lo" ;; |
| bfd_convex_arch) ;; |
| bfd_cris_arch) ta="$ta cris-dis.lo cris-opc.lo" ;; |
| bfd_d10v_arch) ta="$ta d10v-dis.lo d10v-opc.lo" ;; |
| bfd_d30v_arch) ta="$ta d30v-dis.lo d30v-opc.lo" ;; |
| bfd_dlx_arch) ta="$ta dlx-dis.lo" ;; |
| bfd_fr30_arch) ta="$ta fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo" using_cgen=yes ;; |
| bfd_h8300_arch) ta="$ta h8300-dis.lo" ;; |
| bfd_h8500_arch) ta="$ta h8500-dis.lo" ;; |
| bfd_hppa_arch) ta="$ta hppa-dis.lo" ;; |
| bfd_i370_arch) ta="$ta i370-dis.lo i370-opc.lo" ;; |
| bfd_i386_arch) ta="$ta i386-dis.lo" ;; |
| bfd_i860_arch) ta="$ta i860-dis.lo" ;; |
| bfd_i960_arch) ta="$ta i960-dis.lo" ;; |
| bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;; |
| bfd_ip2k_arch) ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;; |
| bfd_iq2000_arch) ta="$ta iq2000-asm.lo iq2000-desc.lo iq2000-dis.lo iq2000-ibld.lo iq2000-opc.lo" using_cgen=yes ;; |
| bfd_m32r_arch) ta="$ta m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo" using_cgen=yes ;; |
| bfd_m68hc11_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;; |
| bfd_m68hc12_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;; |
| bfd_m68k_arch) ta="$ta m68k-dis.lo m68k-opc.lo" ;; |
| bfd_m88k_arch) ta="$ta m88k-dis.lo" ;; |
| bfd_mcore_arch) ta="$ta mcore-dis.lo" ;; |
| bfd_mips_arch) ta="$ta mips-dis.lo mips-opc.lo mips16-opc.lo" ;; |
| bfd_mmix_arch) ta="$ta mmix-dis.lo mmix-opc.lo" ;; |
| bfd_mn10200_arch) ta="$ta m10200-dis.lo m10200-opc.lo" ;; |
| bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;; |
| bfd_msp430_arch) ta="$ta msp430-dis.lo" ;; |
| bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;; |
| bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;; |
| bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;; |
| bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;; |
| bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;; |
| bfd_powerpc_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;; |
| bfd_powerpc_64_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;; |
| bfd_pyramid_arch) ;; |
| bfd_romp_arch) ;; |
| bfd_rs6000_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;; |
| bfd_s390_arch) ta="$ta s390-dis.lo s390-opc.lo" ;; |
| bfd_sh_arch) |
| # We can't decide what we want just from the CPU family. |
| # We want SH5 support unless a specific version of sh is |
| # specified, as in sh3-elf, sh3b-linux-gnu, etc. |
| # Include it just for ELF targets, since the SH5 bfd:s are ELF only. |
| for t in $target $canon_targets; do |
| case $t in |
| all | sh5*-* | sh64*-* | sh-*-*elf* | shl*-*-*elf* | \ |
| sh-*-linux* | shl-*-linux*) |
| ta="$ta sh64-dis.lo sh64-opc.lo" |
| archdefs="$archdefs -DINCLUDE_SHMEDIA" |
| break;; |
| esac; |
| done |
| ta="$ta sh-dis.lo" ;; |
| bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;; |
| bfd_tahoe_arch) ;; |
| bfd_tic30_arch) ta="$ta tic30-dis.lo" ;; |
| bfd_tic4x_arch) ta="$ta tic4x-dis.lo" ;; |
| bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;; |
| bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;; |
| bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;; |
| bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;; |
| bfd_v850ea_arch) ta="$ta v850-opc.lo v850-dis.lo" ;; |
| bfd_vax_arch) ta="$ta vax-dis.lo" ;; |
| bfd_w65_arch) ta="$ta w65-dis.lo" ;; |
| bfd_we32k_arch) ;; |
| bfd_xstormy16_arch) ta="$ta xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo" using_cgen=yes ;; |
| bfd_xtensa_arch) ta="$ta xtensa-dis.lo" ;; |
| bfd_z8k_arch) ta="$ta z8k-dis.lo" ;; |
| bfd_frv_arch) ta="$ta frv-asm.lo frv-desc.lo frv-dis.lo frv-ibld.lo frv-opc.lo" using_cgen=yes ;; |
| |
| "") ;; |
| *) AC_MSG_ERROR(*** unknown target architecture $arch) ;; |
| esac |
| done |
| |
| if test $using_cgen = yes ; then |
| ta="$ta $cgen_files" |
| fi |
| |
| # Weed out duplicate .o files. |
| f="" |
| for i in $ta ; do |
| case " $f " in |
| *" $i "*) ;; |
| *) f="$f $i" ;; |
| esac |
| done |
| ta="$f" |
| |
| # And duplicate -D flags. |
| f="" |
| for i in $archdefs ; do |
| case " $f " in |
| *" $i "*) ;; |
| *) f="$f $i" ;; |
| esac |
| done |
| archdefs="$f" |
| |
| BFD_MACHINES="$ta" |
| |
| else # all_targets is true |
| archdefs=-DARCH_all |
| BFD_MACHINES='$(ALL_MACHINES)' |
| fi |
| |
| AC_SUBST(archdefs) |
| AC_SUBST(BFD_MACHINES) |
| |
| AC_OUTPUT(Makefile po/Makefile.in:po/Make-in, |
| [sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile]) |