| /* Target-dependent code for GDB, the GNU debugger. |
| |
| Copyright (C) 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, |
| 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 |
| Free Software Foundation, Inc. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "defs.h" |
| #include "frame.h" |
| #include "inferior.h" |
| #include "symtab.h" |
| #include "target.h" |
| #include "gdbcore.h" |
| #include "gdbcmd.h" |
| #include "symfile.h" |
| #include "objfiles.h" |
| #include "regcache.h" |
| #include "value.h" |
| #include "osabi.h" |
| #include "regset.h" |
| #include "solib-svr4.h" |
| #include "ppc-tdep.h" |
| #include "trad-frame.h" |
| #include "frame-unwind.h" |
| #include "tramp-frame.h" |
| |
| static CORE_ADDR |
| ppc_linux_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc) |
| { |
| gdb_byte buf[4]; |
| struct obj_section *sect; |
| struct objfile *objfile; |
| unsigned long insn; |
| CORE_ADDR plt_start = 0; |
| CORE_ADDR symtab = 0; |
| CORE_ADDR strtab = 0; |
| int num_slots = -1; |
| int reloc_index = -1; |
| CORE_ADDR plt_table; |
| CORE_ADDR reloc; |
| CORE_ADDR sym; |
| long symidx; |
| char symname[1024]; |
| struct minimal_symbol *msymbol; |
| |
| /* Find the section pc is in; if not in .plt, try the default method. */ |
| sect = find_pc_section (pc); |
| if (!sect || strcmp (sect->the_bfd_section->name, ".plt") != 0) |
| return find_solib_trampoline_target (frame, pc); |
| |
| objfile = sect->objfile; |
| |
| /* Pick up the instruction at pc. It had better be of the |
| form |
| li r11, IDX |
| |
| where IDX is an index into the plt_table. */ |
| |
| if (target_read_memory (pc, buf, 4) != 0) |
| return 0; |
| insn = extract_unsigned_integer (buf, 4); |
| |
| if ((insn & 0xffff0000) != 0x39600000 /* li r11, VAL */ ) |
| return 0; |
| |
| reloc_index = (insn << 16) >> 16; |
| |
| /* Find the objfile that pc is in and obtain the information |
| necessary for finding the symbol name. */ |
| for (sect = objfile->sections; sect < objfile->sections_end; ++sect) |
| { |
| const char *secname = sect->the_bfd_section->name; |
| if (strcmp (secname, ".plt") == 0) |
| plt_start = sect->addr; |
| else if (strcmp (secname, ".rela.plt") == 0) |
| num_slots = ((int) sect->endaddr - (int) sect->addr) / 12; |
| else if (strcmp (secname, ".dynsym") == 0) |
| symtab = sect->addr; |
| else if (strcmp (secname, ".dynstr") == 0) |
| strtab = sect->addr; |
| } |
| |
| /* Make sure we have all the information we need. */ |
| if (plt_start == 0 || num_slots == -1 || symtab == 0 || strtab == 0) |
| return 0; |
| |
| /* Compute the value of the plt table */ |
| plt_table = plt_start + 72 + 8 * num_slots; |
| |
| /* Get address of the relocation entry (Elf32_Rela) */ |
| if (target_read_memory (plt_table + reloc_index, buf, 4) != 0) |
| return 0; |
| reloc = extract_unsigned_integer (buf, 4); |
| |
| sect = find_pc_section (reloc); |
| if (!sect) |
| return 0; |
| |
| if (strcmp (sect->the_bfd_section->name, ".text") == 0) |
| return reloc; |
| |
| /* Now get the r_info field which is the relocation type and symbol |
| index. */ |
| if (target_read_memory (reloc + 4, buf, 4) != 0) |
| return 0; |
| symidx = extract_unsigned_integer (buf, 4); |
| |
| /* Shift out the relocation type leaving just the symbol index */ |
| /* symidx = ELF32_R_SYM(symidx); */ |
| symidx = symidx >> 8; |
| |
| /* compute the address of the symbol */ |
| sym = symtab + symidx * 4; |
| |
| /* Fetch the string table index */ |
| if (target_read_memory (sym, buf, 4) != 0) |
| return 0; |
| symidx = extract_unsigned_integer (buf, 4); |
| |
| /* Fetch the string; we don't know how long it is. Is it possible |
| that the following will fail because we're trying to fetch too |
| much? */ |
| if (target_read_memory (strtab + symidx, (gdb_byte *) symname, |
| sizeof (symname)) != 0) |
| return 0; |
| |
| /* This might not work right if we have multiple symbols with the |
| same name; the only way to really get it right is to perform |
| the same sort of lookup as the dynamic linker. */ |
| msymbol = lookup_minimal_symbol_text (symname, NULL); |
| if (!msymbol) |
| return 0; |
| |
| return SYMBOL_VALUE_ADDRESS (msymbol); |
| } |
| |
| /* ppc_linux_memory_remove_breakpoints attempts to remove a breakpoint |
| in much the same fashion as memory_remove_breakpoint in mem-break.c, |
| but is careful not to write back the previous contents if the code |
| in question has changed in between inserting the breakpoint and |
| removing it. |
| |
| Here is the problem that we're trying to solve... |
| |
| Once upon a time, before introducing this function to remove |
| breakpoints from the inferior, setting a breakpoint on a shared |
| library function prior to running the program would not work |
| properly. In order to understand the problem, it is first |
| necessary to understand a little bit about dynamic linking on |
| this platform. |
| |
| A call to a shared library function is accomplished via a bl |
| (branch-and-link) instruction whose branch target is an entry |
| in the procedure linkage table (PLT). The PLT in the object |
| file is uninitialized. To gdb, prior to running the program, the |
| entries in the PLT are all zeros. |
| |
| Once the program starts running, the shared libraries are loaded |
| and the procedure linkage table is initialized, but the entries in |
| the table are not (necessarily) resolved. Once a function is |
| actually called, the code in the PLT is hit and the function is |
| resolved. In order to better illustrate this, an example is in |
| order; the following example is from the gdb testsuite. |
| |
| We start the program shmain. |
| |
| [kev@arroyo testsuite]$ ../gdb gdb.base/shmain |
| [...] |
| |
| We place two breakpoints, one on shr1 and the other on main. |
| |
| (gdb) b shr1 |
| Breakpoint 1 at 0x100409d4 |
| (gdb) b main |
| Breakpoint 2 at 0x100006a0: file gdb.base/shmain.c, line 44. |
| |
| Examine the instruction (and the immediatly following instruction) |
| upon which the breakpoint was placed. Note that the PLT entry |
| for shr1 contains zeros. |
| |
| (gdb) x/2i 0x100409d4 |
| 0x100409d4 <shr1>: .long 0x0 |
| 0x100409d8 <shr1+4>: .long 0x0 |
| |
| Now run 'til main. |
| |
| (gdb) r |
| Starting program: gdb.base/shmain |
| Breakpoint 1 at 0xffaf790: file gdb.base/shr1.c, line 19. |
| |
| Breakpoint 2, main () |
| at gdb.base/shmain.c:44 |
| 44 g = 1; |
| |
| Examine the PLT again. Note that the loading of the shared |
| library has initialized the PLT to code which loads a constant |
| (which I think is an index into the GOT) into r11 and then |
| branchs a short distance to the code which actually does the |
| resolving. |
| |
| (gdb) x/2i 0x100409d4 |
| 0x100409d4 <shr1>: li r11,4 |
| 0x100409d8 <shr1+4>: b 0x10040984 <sg+4> |
| (gdb) c |
| Continuing. |
| |
| Breakpoint 1, shr1 (x=1) |
| at gdb.base/shr1.c:19 |
| 19 l = 1; |
| |
| Now we've hit the breakpoint at shr1. (The breakpoint was |
| reset from the PLT entry to the actual shr1 function after the |
| shared library was loaded.) Note that the PLT entry has been |
| resolved to contain a branch that takes us directly to shr1. |
| (The real one, not the PLT entry.) |
| |
| (gdb) x/2i 0x100409d4 |
| 0x100409d4 <shr1>: b 0xffaf76c <shr1> |
| 0x100409d8 <shr1+4>: b 0x10040984 <sg+4> |
| |
| The thing to note here is that the PLT entry for shr1 has been |
| changed twice. |
| |
| Now the problem should be obvious. GDB places a breakpoint (a |
| trap instruction) on the zero value of the PLT entry for shr1. |
| Later on, after the shared library had been loaded and the PLT |
| initialized, GDB gets a signal indicating this fact and attempts |
| (as it always does when it stops) to remove all the breakpoints. |
| |
| The breakpoint removal was causing the former contents (a zero |
| word) to be written back to the now initialized PLT entry thus |
| destroying a portion of the initialization that had occurred only a |
| short time ago. When execution continued, the zero word would be |
| executed as an instruction an an illegal instruction trap was |
| generated instead. (0 is not a legal instruction.) |
| |
| The fix for this problem was fairly straightforward. The function |
| memory_remove_breakpoint from mem-break.c was copied to this file, |
| modified slightly, and renamed to ppc_linux_memory_remove_breakpoint. |
| In tm-linux.h, MEMORY_REMOVE_BREAKPOINT is defined to call this new |
| function. |
| |
| The differences between ppc_linux_memory_remove_breakpoint () and |
| memory_remove_breakpoint () are minor. All that the former does |
| that the latter does not is check to make sure that the breakpoint |
| location actually contains a breakpoint (trap instruction) prior |
| to attempting to write back the old contents. If it does contain |
| a trap instruction, we allow the old contents to be written back. |
| Otherwise, we silently do nothing. |
| |
| The big question is whether memory_remove_breakpoint () should be |
| changed to have the same functionality. The downside is that more |
| traffic is generated for remote targets since we'll have an extra |
| fetch of a memory word each time a breakpoint is removed. |
| |
| For the time being, we'll leave this self-modifying-code-friendly |
| version in ppc-linux-tdep.c, but it ought to be migrated somewhere |
| else in the event that some other platform has similar needs with |
| regard to removing breakpoints in some potentially self modifying |
| code. */ |
| int |
| ppc_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, |
| struct bp_target_info *bp_tgt) |
| { |
| CORE_ADDR addr = bp_tgt->placed_address; |
| const unsigned char *bp; |
| int val; |
| int bplen; |
| gdb_byte old_contents[BREAKPOINT_MAX]; |
| |
| /* Determine appropriate breakpoint contents and size for this address. */ |
| bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); |
| if (bp == NULL) |
| error (_("Software breakpoints not implemented for this target.")); |
| |
| val = target_read_memory (addr, old_contents, bplen); |
| |
| /* If our breakpoint is no longer at the address, this means that the |
| program modified the code on us, so it is wrong to put back the |
| old value */ |
| if (val == 0 && memcmp (bp, old_contents, bplen) == 0) |
| val = target_write_memory (addr, bp_tgt->shadow_contents, bplen); |
| |
| return val; |
| } |
| |
| /* For historic reasons, PPC 32 GNU/Linux follows PowerOpen rather |
| than the 32 bit SYSV R4 ABI structure return convention - all |
| structures, no matter their size, are put in memory. Vectors, |
| which were added later, do get returned in a register though. */ |
| |
| static enum return_value_convention |
| ppc_linux_return_value (struct gdbarch *gdbarch, struct type *valtype, |
| struct regcache *regcache, gdb_byte *readbuf, |
| const gdb_byte *writebuf) |
| { |
| if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT |
| || TYPE_CODE (valtype) == TYPE_CODE_UNION) |
| && !((TYPE_LENGTH (valtype) == 16 || TYPE_LENGTH (valtype) == 8) |
| && TYPE_VECTOR (valtype))) |
| return RETURN_VALUE_STRUCT_CONVENTION; |
| else |
| return ppc_sysv_abi_return_value (gdbarch, valtype, regcache, readbuf, |
| writebuf); |
| } |
| |
| /* Macros for matching instructions. Note that, since all the |
| operands are masked off before they're or-ed into the instruction, |
| you can use -1 to make masks. */ |
| |
| #define insn_d(opcd, rts, ra, d) \ |
| ((((opcd) & 0x3f) << 26) \ |
| | (((rts) & 0x1f) << 21) \ |
| | (((ra) & 0x1f) << 16) \ |
| | ((d) & 0xffff)) |
| |
| #define insn_ds(opcd, rts, ra, d, xo) \ |
| ((((opcd) & 0x3f) << 26) \ |
| | (((rts) & 0x1f) << 21) \ |
| | (((ra) & 0x1f) << 16) \ |
| | ((d) & 0xfffc) \ |
| | ((xo) & 0x3)) |
| |
| #define insn_xfx(opcd, rts, spr, xo) \ |
| ((((opcd) & 0x3f) << 26) \ |
| | (((rts) & 0x1f) << 21) \ |
| | (((spr) & 0x1f) << 16) \ |
| | (((spr) & 0x3e0) << 6) \ |
| | (((xo) & 0x3ff) << 1)) |
| |
| /* Read a PPC instruction from memory. PPC instructions are always |
| big-endian, no matter what endianness the program is running in, so |
| we can't use read_memory_integer or one of its friends here. */ |
| static unsigned int |
| read_insn (CORE_ADDR pc) |
| { |
| unsigned char buf[4]; |
| |
| read_memory (pc, buf, 4); |
| return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; |
| } |
| |
| |
| /* An instruction to match. */ |
| struct insn_pattern |
| { |
| unsigned int mask; /* mask the insn with this... */ |
| unsigned int data; /* ...and see if it matches this. */ |
| int optional; /* If non-zero, this insn may be absent. */ |
| }; |
| |
| /* Return non-zero if the instructions at PC match the series |
| described in PATTERN, or zero otherwise. PATTERN is an array of |
| 'struct insn_pattern' objects, terminated by an entry whose mask is |
| zero. |
| |
| When the match is successful, fill INSN[i] with what PATTERN[i] |
| matched. If PATTERN[i] is optional, and the instruction wasn't |
| present, set INSN[i] to 0 (which is not a valid PPC instruction). |
| INSN should have as many elements as PATTERN. Note that, if |
| PATTERN contains optional instructions which aren't present in |
| memory, then INSN will have holes, so INSN[i] isn't necessarily the |
| i'th instruction in memory. */ |
| static int |
| insns_match_pattern (CORE_ADDR pc, |
| struct insn_pattern *pattern, |
| unsigned int *insn) |
| { |
| int i; |
| |
| for (i = 0; pattern[i].mask; i++) |
| { |
| insn[i] = read_insn (pc); |
| if ((insn[i] & pattern[i].mask) == pattern[i].data) |
| pc += 4; |
| else if (pattern[i].optional) |
| insn[i] = 0; |
| else |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| |
| /* Return the 'd' field of the d-form instruction INSN, properly |
| sign-extended. */ |
| static CORE_ADDR |
| insn_d_field (unsigned int insn) |
| { |
| return ((((CORE_ADDR) insn & 0xffff) ^ 0x8000) - 0x8000); |
| } |
| |
| |
| /* Return the 'ds' field of the ds-form instruction INSN, with the two |
| zero bits concatenated at the right, and properly |
| sign-extended. */ |
| static CORE_ADDR |
| insn_ds_field (unsigned int insn) |
| { |
| return ((((CORE_ADDR) insn & 0xfffc) ^ 0x8000) - 0x8000); |
| } |
| |
| |
| /* If DESC is the address of a 64-bit PowerPC GNU/Linux function |
| descriptor, return the descriptor's entry point. */ |
| static CORE_ADDR |
| ppc64_desc_entry_point (CORE_ADDR desc) |
| { |
| /* The first word of the descriptor is the entry point. */ |
| return (CORE_ADDR) read_memory_unsigned_integer (desc, 8); |
| } |
| |
| |
| /* Pattern for the standard linkage function. These are built by |
| build_plt_stub in elf64-ppc.c, whose GLINK argument is always |
| zero. */ |
| static struct insn_pattern ppc64_standard_linkage[] = |
| { |
| /* addis r12, r2, <any> */ |
| { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 }, |
| |
| /* std r2, 40(r1) */ |
| { -1, insn_ds (62, 2, 1, 40, 0), 0 }, |
| |
| /* ld r11, <any>(r12) */ |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, |
| |
| /* addis r12, r12, 1 <optional> */ |
| { insn_d (-1, -1, -1, -1), insn_d (15, 12, 2, 1), 1 }, |
| |
| /* ld r2, <any>(r12) */ |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 12, 0, 0), 0 }, |
| |
| /* addis r12, r12, 1 <optional> */ |
| { insn_d (-1, -1, -1, -1), insn_d (15, 12, 2, 1), 1 }, |
| |
| /* mtctr r11 */ |
| { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), |
| 0 }, |
| |
| /* ld r11, <any>(r12) */ |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, |
| |
| /* bctr */ |
| { -1, 0x4e800420, 0 }, |
| |
| { 0, 0, 0 } |
| }; |
| #define PPC64_STANDARD_LINKAGE_LEN \ |
| (sizeof (ppc64_standard_linkage) / sizeof (ppc64_standard_linkage[0])) |
| |
| /* When the dynamic linker is doing lazy symbol resolution, the first |
| call to a function in another object will go like this: |
| |
| - The user's function calls the linkage function: |
| |
| 100007c4: 4b ff fc d5 bl 10000498 |
| 100007c8: e8 41 00 28 ld r2,40(r1) |
| |
| - The linkage function loads the entry point (and other stuff) from |
| the function descriptor in the PLT, and jumps to it: |
| |
| 10000498: 3d 82 00 00 addis r12,r2,0 |
| 1000049c: f8 41 00 28 std r2,40(r1) |
| 100004a0: e9 6c 80 98 ld r11,-32616(r12) |
| 100004a4: e8 4c 80 a0 ld r2,-32608(r12) |
| 100004a8: 7d 69 03 a6 mtctr r11 |
| 100004ac: e9 6c 80 a8 ld r11,-32600(r12) |
| 100004b0: 4e 80 04 20 bctr |
| |
| - But since this is the first time that PLT entry has been used, it |
| sends control to its glink entry. That loads the number of the |
| PLT entry and jumps to the common glink0 code: |
| |
| 10000c98: 38 00 00 00 li r0,0 |
| 10000c9c: 4b ff ff dc b 10000c78 |
| |
| - The common glink0 code then transfers control to the dynamic |
| linker's fixup code: |
| |
| 10000c78: e8 41 00 28 ld r2,40(r1) |
| 10000c7c: 3d 82 00 00 addis r12,r2,0 |
| 10000c80: e9 6c 80 80 ld r11,-32640(r12) |
| 10000c84: e8 4c 80 88 ld r2,-32632(r12) |
| 10000c88: 7d 69 03 a6 mtctr r11 |
| 10000c8c: e9 6c 80 90 ld r11,-32624(r12) |
| 10000c90: 4e 80 04 20 bctr |
| |
| Eventually, this code will figure out how to skip all of this, |
| including the dynamic linker. At the moment, we just get through |
| the linkage function. */ |
| |
| /* If the current thread is about to execute a series of instructions |
| at PC matching the ppc64_standard_linkage pattern, and INSN is the result |
| from that pattern match, return the code address to which the |
| standard linkage function will send them. (This doesn't deal with |
| dynamic linker lazy symbol resolution stubs.) */ |
| static CORE_ADDR |
| ppc64_standard_linkage_target (struct frame_info *frame, |
| CORE_ADDR pc, unsigned int *insn) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame)); |
| |
| /* The address of the function descriptor this linkage function |
| references. */ |
| CORE_ADDR desc |
| = ((CORE_ADDR) get_frame_register_unsigned (frame, |
| tdep->ppc_gp0_regnum + 2) |
| + (insn_d_field (insn[0]) << 16) |
| + insn_ds_field (insn[2])); |
| |
| /* The first word of the descriptor is the entry point. Return that. */ |
| return ppc64_desc_entry_point (desc); |
| } |
| |
| |
| /* Given that we've begun executing a call trampoline at PC, return |
| the entry point of the function the trampoline will go to. */ |
| static CORE_ADDR |
| ppc64_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc) |
| { |
| unsigned int ppc64_standard_linkage_insn[PPC64_STANDARD_LINKAGE_LEN]; |
| |
| if (insns_match_pattern (pc, ppc64_standard_linkage, |
| ppc64_standard_linkage_insn)) |
| return ppc64_standard_linkage_target (frame, pc, |
| ppc64_standard_linkage_insn); |
| else |
| return 0; |
| } |
| |
| |
| /* Support for convert_from_func_ptr_addr (ARCH, ADDR, TARG) on PPC |
| GNU/Linux. |
| |
| Usually a function pointer's representation is simply the address |
| of the function. On GNU/Linux on the PowerPC however, a function |
| pointer may be a pointer to a function descriptor. |
| |
| For PPC64, a function descriptor is a TOC entry, in a data section, |
| which contains three words: the first word is the address of the |
| function, the second word is the TOC pointer (r2), and the third word |
| is the static chain value. |
| |
| For PPC32, there are two kinds of function pointers: non-secure and |
| secure. Non-secure function pointers point directly to the |
| function in a code section and thus need no translation. Secure |
| ones (from GCC's -msecure-plt option) are in a data section and |
| contain one word: the address of the function. |
| |
| Throughout GDB it is currently assumed that a function pointer contains |
| the address of the function, which is not easy to fix. In addition, the |
| conversion of a function address to a function pointer would |
| require allocation of a TOC entry in the inferior's memory space, |
| with all its drawbacks. To be able to call C++ virtual methods in |
| the inferior (which are called via function pointers), |
| find_function_addr uses this function to get the function address |
| from a function pointer. |
| |
| If ADDR points at what is clearly a function descriptor, transform |
| it into the address of the corresponding function, if needed. Be |
| conservative, otherwise GDB will do the transformation on any |
| random addresses such as occur when there is no symbol table. */ |
| |
| static CORE_ADDR |
| ppc_linux_convert_from_func_ptr_addr (struct gdbarch *gdbarch, |
| CORE_ADDR addr, |
| struct target_ops *targ) |
| { |
| struct gdbarch_tdep *tdep; |
| struct section_table *s = target_section_by_addr (targ, addr); |
| char *sect_name = NULL; |
| |
| if (!s) |
| return addr; |
| |
| tdep = gdbarch_tdep (gdbarch); |
| |
| switch (tdep->wordsize) |
| { |
| case 4: |
| sect_name = ".plt"; |
| break; |
| case 8: |
| sect_name = ".opd"; |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, |
| _("failed internal consistency check")); |
| } |
| |
| /* Check if ADDR points to a function descriptor. */ |
| |
| /* NOTE: this depends on the coincidence that the address of a functions |
| entry point is contained in the first word of its function descriptor |
| for both PPC-64 and for PPC-32 with secure PLTs. */ |
| if ((strcmp (s->the_bfd_section->name, sect_name) == 0) |
| && s->the_bfd_section->flags & SEC_DATA) |
| return get_target_memory_unsigned (targ, addr, tdep->wordsize); |
| |
| return addr; |
| } |
| |
| /* This wrapper clears areas in the linux gregset not written by |
| ppc_collect_gregset. */ |
| |
| static void |
| ppc_linux_collect_gregset (const struct regset *regset, |
| const struct regcache *regcache, |
| int regnum, void *gregs, size_t len) |
| { |
| if (regnum == -1) |
| memset (gregs, 0, len); |
| ppc_collect_gregset (regset, regcache, regnum, gregs, len); |
| } |
| |
| /* Regset descriptions. */ |
| static const struct ppc_reg_offsets ppc32_linux_reg_offsets = |
| { |
| /* General-purpose registers. */ |
| /* .r0_offset = */ 0, |
| /* .gpr_size = */ 4, |
| /* .xr_size = */ 4, |
| /* .pc_offset = */ 128, |
| /* .ps_offset = */ 132, |
| /* .cr_offset = */ 152, |
| /* .lr_offset = */ 144, |
| /* .ctr_offset = */ 140, |
| /* .xer_offset = */ 148, |
| /* .mq_offset = */ 156, |
| |
| /* Floating-point registers. */ |
| /* .f0_offset = */ 0, |
| /* .fpscr_offset = */ 256, |
| /* .fpscr_size = */ 8, |
| |
| /* AltiVec registers. */ |
| /* .vr0_offset = */ 0, |
| /* .vscr_offset = */ 512 + 12, |
| /* .vrsave_offset = */ 528 |
| }; |
| |
| static const struct ppc_reg_offsets ppc64_linux_reg_offsets = |
| { |
| /* General-purpose registers. */ |
| /* .r0_offset = */ 0, |
| /* .gpr_size = */ 8, |
| /* .xr_size = */ 8, |
| /* .pc_offset = */ 256, |
| /* .ps_offset = */ 264, |
| /* .cr_offset = */ 304, |
| /* .lr_offset = */ 288, |
| /* .ctr_offset = */ 280, |
| /* .xer_offset = */ 296, |
| /* .mq_offset = */ 312, |
| |
| /* Floating-point registers. */ |
| /* .f0_offset = */ 0, |
| /* .fpscr_offset = */ 256, |
| /* .fpscr_size = */ 8, |
| |
| /* AltiVec registers. */ |
| /* .vr0_offset = */ 0, |
| /* .vscr_offset = */ 512 + 12, |
| /* .vrsave_offset = */ 528 |
| }; |
| |
| static const struct regset ppc32_linux_gregset = { |
| &ppc32_linux_reg_offsets, |
| ppc_supply_gregset, |
| ppc_linux_collect_gregset, |
| NULL |
| }; |
| |
| static const struct regset ppc64_linux_gregset = { |
| &ppc64_linux_reg_offsets, |
| ppc_supply_gregset, |
| ppc_linux_collect_gregset, |
| NULL |
| }; |
| |
| static const struct regset ppc32_linux_fpregset = { |
| &ppc32_linux_reg_offsets, |
| ppc_supply_fpregset, |
| ppc_collect_fpregset, |
| NULL |
| }; |
| |
| static const struct regset ppc32_linux_vrregset = { |
| &ppc32_linux_reg_offsets, |
| ppc_supply_vrregset, |
| ppc_collect_vrregset, |
| NULL |
| }; |
| |
| const struct regset * |
| ppc_linux_gregset (int wordsize) |
| { |
| return wordsize == 8 ? &ppc64_linux_gregset : &ppc32_linux_gregset; |
| } |
| |
| const struct regset * |
| ppc_linux_fpregset (void) |
| { |
| return &ppc32_linux_fpregset; |
| } |
| |
| static const struct regset * |
| ppc_linux_regset_from_core_section (struct gdbarch *core_arch, |
| const char *sect_name, size_t sect_size) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (core_arch); |
| if (strcmp (sect_name, ".reg") == 0) |
| { |
| if (tdep->wordsize == 4) |
| return &ppc32_linux_gregset; |
| else |
| return &ppc64_linux_gregset; |
| } |
| if (strcmp (sect_name, ".reg2") == 0) |
| return &ppc32_linux_fpregset; |
| if (strcmp (sect_name, ".reg-ppc-vmx") == 0) |
| return &ppc32_linux_vrregset; |
| return NULL; |
| } |
| |
| static void |
| ppc_linux_sigtramp_cache (struct frame_info *next_frame, |
| struct trad_frame_cache *this_cache, |
| CORE_ADDR func, LONGEST offset, |
| int bias) |
| { |
| CORE_ADDR base; |
| CORE_ADDR regs; |
| CORE_ADDR gpregs; |
| CORE_ADDR fpregs; |
| int i; |
| struct gdbarch *gdbarch = get_frame_arch (next_frame); |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| |
| base = frame_unwind_register_unsigned (next_frame, |
| gdbarch_sp_regnum (gdbarch)); |
| if (bias > 0 && frame_pc_unwind (next_frame) != func) |
| /* See below, some signal trampolines increment the stack as their |
| first instruction, need to compensate for that. */ |
| base -= bias; |
| |
| /* Find the address of the register buffer pointer. */ |
| regs = base + offset; |
| /* Use that to find the address of the corresponding register |
| buffers. */ |
| gpregs = read_memory_unsigned_integer (regs, tdep->wordsize); |
| fpregs = gpregs + 48 * tdep->wordsize; |
| |
| /* General purpose. */ |
| for (i = 0; i < 32; i++) |
| { |
| int regnum = i + tdep->ppc_gp0_regnum; |
| trad_frame_set_reg_addr (this_cache, regnum, gpregs + i * tdep->wordsize); |
| } |
| trad_frame_set_reg_addr (this_cache, |
| gdbarch_pc_regnum (gdbarch), |
| gpregs + 32 * tdep->wordsize); |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_ctr_regnum, |
| gpregs + 35 * tdep->wordsize); |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_lr_regnum, |
| gpregs + 36 * tdep->wordsize); |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_xer_regnum, |
| gpregs + 37 * tdep->wordsize); |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_cr_regnum, |
| gpregs + 38 * tdep->wordsize); |
| |
| if (ppc_floating_point_unit_p (gdbarch)) |
| { |
| /* Floating point registers. */ |
| for (i = 0; i < 32; i++) |
| { |
| int regnum = i + gdbarch_fp0_regnum (gdbarch); |
| trad_frame_set_reg_addr (this_cache, regnum, |
| fpregs + i * tdep->wordsize); |
| } |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_fpscr_regnum, |
| fpregs + 32 * tdep->wordsize); |
| } |
| trad_frame_set_id (this_cache, frame_id_build (base, func)); |
| } |
| |
| static void |
| ppc32_linux_sigaction_cache_init (const struct tramp_frame *self, |
| struct frame_info *next_frame, |
| struct trad_frame_cache *this_cache, |
| CORE_ADDR func) |
| { |
| ppc_linux_sigtramp_cache (next_frame, this_cache, func, |
| 0xd0 /* Offset to ucontext_t. */ |
| + 0x30 /* Offset to .reg. */, |
| 0); |
| } |
| |
| static void |
| ppc64_linux_sigaction_cache_init (const struct tramp_frame *self, |
| struct frame_info *next_frame, |
| struct trad_frame_cache *this_cache, |
| CORE_ADDR func) |
| { |
| ppc_linux_sigtramp_cache (next_frame, this_cache, func, |
| 0x80 /* Offset to ucontext_t. */ |
| + 0xe0 /* Offset to .reg. */, |
| 128); |
| } |
| |
| static void |
| ppc32_linux_sighandler_cache_init (const struct tramp_frame *self, |
| struct frame_info *next_frame, |
| struct trad_frame_cache *this_cache, |
| CORE_ADDR func) |
| { |
| ppc_linux_sigtramp_cache (next_frame, this_cache, func, |
| 0x40 /* Offset to ucontext_t. */ |
| + 0x1c /* Offset to .reg. */, |
| 0); |
| } |
| |
| static void |
| ppc64_linux_sighandler_cache_init (const struct tramp_frame *self, |
| struct frame_info *next_frame, |
| struct trad_frame_cache *this_cache, |
| CORE_ADDR func) |
| { |
| ppc_linux_sigtramp_cache (next_frame, this_cache, func, |
| 0x80 /* Offset to struct sigcontext. */ |
| + 0x38 /* Offset to .reg. */, |
| 128); |
| } |
| |
| static struct tramp_frame ppc32_linux_sigaction_tramp_frame = { |
| SIGTRAMP_FRAME, |
| 4, |
| { |
| { 0x380000ac, -1 }, /* li r0, 172 */ |
| { 0x44000002, -1 }, /* sc */ |
| { TRAMP_SENTINEL_INSN }, |
| }, |
| ppc32_linux_sigaction_cache_init |
| }; |
| static struct tramp_frame ppc64_linux_sigaction_tramp_frame = { |
| SIGTRAMP_FRAME, |
| 4, |
| { |
| { 0x38210080, -1 }, /* addi r1,r1,128 */ |
| { 0x380000ac, -1 }, /* li r0, 172 */ |
| { 0x44000002, -1 }, /* sc */ |
| { TRAMP_SENTINEL_INSN }, |
| }, |
| ppc64_linux_sigaction_cache_init |
| }; |
| static struct tramp_frame ppc32_linux_sighandler_tramp_frame = { |
| SIGTRAMP_FRAME, |
| 4, |
| { |
| { 0x38000077, -1 }, /* li r0,119 */ |
| { 0x44000002, -1 }, /* sc */ |
| { TRAMP_SENTINEL_INSN }, |
| }, |
| ppc32_linux_sighandler_cache_init |
| }; |
| static struct tramp_frame ppc64_linux_sighandler_tramp_frame = { |
| SIGTRAMP_FRAME, |
| 4, |
| { |
| { 0x38210080, -1 }, /* addi r1,r1,128 */ |
| { 0x38000077, -1 }, /* li r0,119 */ |
| { 0x44000002, -1 }, /* sc */ |
| { TRAMP_SENTINEL_INSN }, |
| }, |
| ppc64_linux_sighandler_cache_init |
| }; |
| |
| static void |
| ppc_linux_init_abi (struct gdbarch_info info, |
| struct gdbarch *gdbarch) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| |
| /* PPC GNU/Linux uses either 64-bit or 128-bit long doubles; where |
| 128-bit, they are IBM long double, not IEEE quad long double as |
| in the System V ABI PowerPC Processor Supplement. We can safely |
| let them default to 128-bit, since the debug info will give the |
| size of type actually used in each case. */ |
| set_gdbarch_long_double_bit (gdbarch, 16 * TARGET_CHAR_BIT); |
| set_gdbarch_long_double_format (gdbarch, floatformats_ibm_long_double); |
| |
| /* Handle PPC GNU/Linux 64-bit function pointers (which are really |
| function descriptors) and 32-bit secure PLT entries. */ |
| set_gdbarch_convert_from_func_ptr_addr |
| (gdbarch, ppc_linux_convert_from_func_ptr_addr); |
| |
| if (tdep->wordsize == 4) |
| { |
| /* Until November 2001, gcc did not comply with the 32 bit SysV |
| R4 ABI requirement that structures less than or equal to 8 |
| bytes should be returned in registers. Instead GCC was using |
| the the AIX/PowerOpen ABI - everything returned in memory |
| (well ignoring vectors that is). When this was corrected, it |
| wasn't fixed for GNU/Linux native platform. Use the |
| PowerOpen struct convention. */ |
| set_gdbarch_return_value (gdbarch, ppc_linux_return_value); |
| |
| set_gdbarch_memory_remove_breakpoint (gdbarch, |
| ppc_linux_memory_remove_breakpoint); |
| |
| /* Shared library handling. */ |
| set_gdbarch_skip_trampoline_code (gdbarch, |
| ppc_linux_skip_trampoline_code); |
| set_solib_svr4_fetch_link_map_offsets |
| (gdbarch, svr4_ilp32_fetch_link_map_offsets); |
| |
| /* Trampolines. */ |
| tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sigaction_tramp_frame); |
| tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sighandler_tramp_frame); |
| } |
| |
| if (tdep->wordsize == 8) |
| { |
| /* Shared library handling. */ |
| set_gdbarch_skip_trampoline_code (gdbarch, ppc64_skip_trampoline_code); |
| set_solib_svr4_fetch_link_map_offsets |
| (gdbarch, svr4_lp64_fetch_link_map_offsets); |
| |
| /* Trampolines. */ |
| tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sigaction_tramp_frame); |
| tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sighandler_tramp_frame); |
| } |
| set_gdbarch_regset_from_core_section (gdbarch, ppc_linux_regset_from_core_section); |
| |
| /* Enable TLS support. */ |
| set_gdbarch_fetch_tls_load_module_address (gdbarch, |
| svr4_fetch_objfile_link_map); |
| } |
| |
| void |
| _initialize_ppc_linux_tdep (void) |
| { |
| /* Register for all sub-familes of the POWER/PowerPC: 32-bit and |
| 64-bit PowerPC, and the older rs6k. */ |
| gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc, GDB_OSABI_LINUX, |
| ppc_linux_init_abi); |
| gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc64, GDB_OSABI_LINUX, |
| ppc_linux_init_abi); |
| gdbarch_register_osabi (bfd_arch_rs6000, bfd_mach_rs6k, GDB_OSABI_LINUX, |
| ppc_linux_init_abi); |
| } |