| /* Target-dependent code for the HP PA architecture, for GDB. |
| Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 1999 |
| Free Software Foundation, Inc. |
| |
| Contributed by the Center for Software Science at the |
| University of Utah (pa-gdb-bugs@cs.utah.edu). |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| |
| #include "defs.h" |
| #include "frame.h" |
| #include "bfd.h" |
| #include "inferior.h" |
| #include "value.h" |
| |
| /* For argument passing to the inferior */ |
| #include "symtab.h" |
| |
| #ifdef USG |
| #include <sys/types.h> |
| #endif |
| |
| #include <dl.h> |
| #include <sys/param.h> |
| #include <signal.h> |
| |
| #include <sys/ptrace.h> |
| #include <machine/save_state.h> |
| |
| #ifdef COFF_ENCAPSULATE |
| #include "a.out.encap.h" |
| #else |
| #endif |
| |
| /*#include <sys/user.h> After a.out.h */ |
| #include <sys/file.h> |
| #include "gdb_stat.h" |
| #include "wait.h" |
| |
| #include "gdbcore.h" |
| #include "gdbcmd.h" |
| #include "target.h" |
| #include "symfile.h" |
| #include "objfiles.h" |
| |
| /* To support asking "What CPU is this?" */ |
| #include <unistd.h> |
| |
| /* To support detection of the pseudo-initial frame |
| that threads have. */ |
| #define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit" |
| #define THREAD_INITIAL_FRAME_SYM_LEN sizeof(THREAD_INITIAL_FRAME_SYMBOL) |
| |
| static int extract_5_load PARAMS ((unsigned int)); |
| |
| static unsigned extract_5R_store PARAMS ((unsigned int)); |
| |
| static unsigned extract_5r_store PARAMS ((unsigned int)); |
| |
| static void find_dummy_frame_regs PARAMS ((struct frame_info *, |
| struct frame_saved_regs *)); |
| |
| static int find_proc_framesize PARAMS ((CORE_ADDR)); |
| |
| static int find_return_regnum PARAMS ((CORE_ADDR)); |
| |
| struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR)); |
| |
| static int extract_17 PARAMS ((unsigned int)); |
| |
| static unsigned deposit_21 PARAMS ((unsigned int, unsigned int)); |
| |
| static int extract_21 PARAMS ((unsigned)); |
| |
| static unsigned deposit_14 PARAMS ((int, unsigned int)); |
| |
| static int extract_14 PARAMS ((unsigned)); |
| |
| static void unwind_command PARAMS ((char *, int)); |
| |
| static int low_sign_extend PARAMS ((unsigned int, unsigned int)); |
| |
| static int sign_extend PARAMS ((unsigned int, unsigned int)); |
| |
| static int restore_pc_queue PARAMS ((struct frame_saved_regs *)); |
| |
| static int hppa_alignof PARAMS ((struct type *)); |
| |
| /* To support multi-threading and stepping. */ |
| int hppa_prepare_to_proceed PARAMS (()); |
| |
| static int prologue_inst_adjust_sp PARAMS ((unsigned long)); |
| |
| static int is_branch PARAMS ((unsigned long)); |
| |
| static int inst_saves_gr PARAMS ((unsigned long)); |
| |
| static int inst_saves_fr PARAMS ((unsigned long)); |
| |
| static int pc_in_interrupt_handler PARAMS ((CORE_ADDR)); |
| |
| static int pc_in_linker_stub PARAMS ((CORE_ADDR)); |
| |
| static int compare_unwind_entries PARAMS ((const void *, const void *)); |
| |
| static void read_unwind_info PARAMS ((struct objfile *)); |
| |
| static void internalize_unwinds PARAMS ((struct objfile *, |
| struct unwind_table_entry *, |
| asection *, unsigned int, |
| unsigned int, CORE_ADDR)); |
| static void pa_print_registers PARAMS ((char *, int, int)); |
| static void pa_strcat_registers PARAMS ((char *, int, int, GDB_FILE *)); |
| static void pa_register_look_aside PARAMS ((char *, int, long *)); |
| static void pa_print_fp_reg PARAMS ((int)); |
| static void pa_strcat_fp_reg PARAMS ((int, GDB_FILE *, enum precision_type)); |
| |
| typedef struct { |
| struct minimal_symbol * msym; |
| CORE_ADDR solib_handle; |
| } args_for_find_stub; |
| |
| static CORE_ADDR cover_find_stub_with_shl_get PARAMS ((args_for_find_stub *)); |
| |
| static int is_pa_2 = 0; /* False */ |
| |
| /* This is declared in symtab.c; set to 1 in hp-symtab-read.c */ |
| extern int hp_som_som_object_present; |
| |
| /* In breakpoint.c */ |
| extern int exception_catchpoints_are_fragile; |
| |
| /* This is defined in valops.c. */ |
| extern value_ptr |
| find_function_in_inferior PARAMS((char *)); |
| |
| /* Should call_function allocate stack space for a struct return? */ |
| int |
| hppa_use_struct_convention (gcc_p, type) |
| int gcc_p; |
| struct type *type; |
| { |
| return (TYPE_LENGTH (type) > 8); |
| } |
| |
| |
| /* Routines to extract various sized constants out of hppa |
| instructions. */ |
| |
| /* This assumes that no garbage lies outside of the lower bits of |
| value. */ |
| |
| static int |
| sign_extend (val, bits) |
| unsigned val, bits; |
| { |
| return (int)(val >> (bits - 1) ? (-1 << bits) | val : val); |
| } |
| |
| /* For many immediate values the sign bit is the low bit! */ |
| |
| static int |
| low_sign_extend (val, bits) |
| unsigned val, bits; |
| { |
| return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1); |
| } |
| |
| /* extract the immediate field from a ld{bhw}s instruction */ |
| |
| #if 0 |
| |
| unsigned |
| get_field (val, from, to) |
| unsigned val, from, to; |
| { |
| val = val >> 31 - to; |
| return val & ((1 << 32 - from) - 1); |
| } |
| |
| unsigned |
| set_field (val, from, to, new_val) |
| unsigned *val, from, to; |
| { |
| unsigned mask = ~((1 << (to - from + 1)) << (31 - from)); |
| return *val = *val & mask | (new_val << (31 - from)); |
| } |
| |
| /* extract a 3-bit space register number from a be, ble, mtsp or mfsp */ |
| |
| int |
| extract_3 (word) |
| unsigned word; |
| { |
| return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17); |
| } |
| |
| #endif |
| |
| static int |
| extract_5_load (word) |
| unsigned word; |
| { |
| return low_sign_extend (word >> 16 & MASK_5, 5); |
| } |
| |
| #if 0 |
| |
| /* extract the immediate field from a st{bhw}s instruction */ |
| |
| int |
| extract_5_store (word) |
| unsigned word; |
| { |
| return low_sign_extend (word & MASK_5, 5); |
| } |
| |
| #endif /* 0 */ |
| |
| /* extract the immediate field from a break instruction */ |
| |
| static unsigned |
| extract_5r_store (word) |
| unsigned word; |
| { |
| return (word & MASK_5); |
| } |
| |
| /* extract the immediate field from a {sr}sm instruction */ |
| |
| static unsigned |
| extract_5R_store (word) |
| unsigned word; |
| { |
| return (word >> 16 & MASK_5); |
| } |
| |
| /* extract an 11 bit immediate field */ |
| |
| #if 0 |
| |
| int |
| extract_11 (word) |
| unsigned word; |
| { |
| return low_sign_extend (word & MASK_11, 11); |
| } |
| |
| #endif |
| |
| /* extract a 14 bit immediate field */ |
| |
| static int |
| extract_14 (word) |
| unsigned word; |
| { |
| return low_sign_extend (word & MASK_14, 14); |
| } |
| |
| /* deposit a 14 bit constant in a word */ |
| |
| static unsigned |
| deposit_14 (opnd, word) |
| int opnd; |
| unsigned word; |
| { |
| unsigned sign = (opnd < 0 ? 1 : 0); |
| |
| return word | ((unsigned)opnd << 1 & MASK_14) | sign; |
| } |
| |
| /* extract a 21 bit constant */ |
| |
| static int |
| extract_21 (word) |
| unsigned word; |
| { |
| int val; |
| |
| word &= MASK_21; |
| word <<= 11; |
| val = GET_FIELD (word, 20, 20); |
| val <<= 11; |
| val |= GET_FIELD (word, 9, 19); |
| val <<= 2; |
| val |= GET_FIELD (word, 5, 6); |
| val <<= 5; |
| val |= GET_FIELD (word, 0, 4); |
| val <<= 2; |
| val |= GET_FIELD (word, 7, 8); |
| return sign_extend (val, 21) << 11; |
| } |
| |
| /* deposit a 21 bit constant in a word. Although 21 bit constants are |
| usually the top 21 bits of a 32 bit constant, we assume that only |
| the low 21 bits of opnd are relevant */ |
| |
| static unsigned |
| deposit_21 (opnd, word) |
| unsigned opnd, word; |
| { |
| unsigned val = 0; |
| |
| val |= GET_FIELD (opnd, 11 + 14, 11 + 18); |
| val <<= 2; |
| val |= GET_FIELD (opnd, 11 + 12, 11 + 13); |
| val <<= 2; |
| val |= GET_FIELD (opnd, 11 + 19, 11 + 20); |
| val <<= 11; |
| val |= GET_FIELD (opnd, 11 + 1, 11 + 11); |
| val <<= 1; |
| val |= GET_FIELD (opnd, 11 + 0, 11 + 0); |
| return word | val; |
| } |
| |
| /* extract a 12 bit constant from branch instructions */ |
| |
| #if 0 |
| |
| int |
| extract_12 (word) |
| unsigned word; |
| { |
| return sign_extend (GET_FIELD (word, 19, 28) | |
| GET_FIELD (word, 29, 29) << 10 | |
| (word & 0x1) << 11, 12) << 2; |
| } |
| |
| /* Deposit a 17 bit constant in an instruction (like bl). */ |
| |
| unsigned int |
| deposit_17 (opnd, word) |
| unsigned opnd, word; |
| { |
| word |= GET_FIELD (opnd, 15 + 0, 15 + 0); /* w */ |
| word |= GET_FIELD (opnd, 15 + 1, 15 + 5) << 16; /* w1 */ |
| word |= GET_FIELD (opnd, 15 + 6, 15 + 6) << 2; /* w2[10] */ |
| word |= GET_FIELD (opnd, 15 + 7, 15 + 16) << 3; /* w2[0..9] */ |
| |
| return word; |
| } |
| |
| #endif |
| |
| /* extract a 17 bit constant from branch instructions, returning the |
| 19 bit signed value. */ |
| |
| static int |
| extract_17 (word) |
| unsigned word; |
| { |
| return sign_extend (GET_FIELD (word, 19, 28) | |
| GET_FIELD (word, 29, 29) << 10 | |
| GET_FIELD (word, 11, 15) << 11 | |
| (word & 0x1) << 16, 17) << 2; |
| } |
| |
| |
| /* Compare the start address for two unwind entries returning 1 if |
| the first address is larger than the second, -1 if the second is |
| larger than the first, and zero if they are equal. */ |
| |
| static int |
| compare_unwind_entries (arg1, arg2) |
| const void *arg1; |
| const void *arg2; |
| { |
| const struct unwind_table_entry *a = arg1; |
| const struct unwind_table_entry *b = arg2; |
| |
| if (a->region_start > b->region_start) |
| return 1; |
| else if (a->region_start < b->region_start) |
| return -1; |
| else |
| return 0; |
| } |
| |
| static void |
| internalize_unwinds (objfile, table, section, entries, size, text_offset) |
| struct objfile *objfile; |
| struct unwind_table_entry *table; |
| asection *section; |
| unsigned int entries, size; |
| CORE_ADDR text_offset; |
| { |
| /* We will read the unwind entries into temporary memory, then |
| fill in the actual unwind table. */ |
| if (size > 0) |
| { |
| unsigned long tmp; |
| unsigned i; |
| char *buf = alloca (size); |
| |
| bfd_get_section_contents (objfile->obfd, section, buf, 0, size); |
| |
| /* Now internalize the information being careful to handle host/target |
| endian issues. */ |
| for (i = 0; i < entries; i++) |
| { |
| table[i].region_start = bfd_get_32 (objfile->obfd, |
| (bfd_byte *)buf); |
| table[i].region_start += text_offset; |
| buf += 4; |
| table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *)buf); |
| table[i].region_end += text_offset; |
| buf += 4; |
| tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf); |
| buf += 4; |
| table[i].Cannot_unwind = (tmp >> 31) & 0x1; |
| table[i].Millicode = (tmp >> 30) & 0x1; |
| table[i].Millicode_save_sr0 = (tmp >> 29) & 0x1; |
| table[i].Region_description = (tmp >> 27) & 0x3; |
| table[i].reserved1 = (tmp >> 26) & 0x1; |
| table[i].Entry_SR = (tmp >> 25) & 0x1; |
| table[i].Entry_FR = (tmp >> 21) & 0xf; |
| table[i].Entry_GR = (tmp >> 16) & 0x1f; |
| table[i].Args_stored = (tmp >> 15) & 0x1; |
| table[i].Variable_Frame = (tmp >> 14) & 0x1; |
| table[i].Separate_Package_Body = (tmp >> 13) & 0x1; |
| table[i].Frame_Extension_Millicode = (tmp >> 12) & 0x1; |
| table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1; |
| table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1; |
| table[i].Ada_Region = (tmp >> 9) & 0x1; |
| table[i].cxx_info = (tmp >> 8) & 0x1; |
| table[i].cxx_try_catch = (tmp >> 7) & 0x1; |
| table[i].sched_entry_seq = (tmp >> 6) & 0x1; |
| table[i].reserved2 = (tmp >> 5) & 0x1; |
| table[i].Save_SP = (tmp >> 4) & 0x1; |
| table[i].Save_RP = (tmp >> 3) & 0x1; |
| table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1; |
| table[i].extn_ptr_defined = (tmp >> 1) & 0x1; |
| table[i].Cleanup_defined = tmp & 0x1; |
| tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf); |
| buf += 4; |
| table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1; |
| table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1; |
| table[i].Large_frame = (tmp >> 29) & 0x1; |
| table[i].Pseudo_SP_Set = (tmp >> 28) & 0x1; |
| table[i].reserved4 = (tmp >> 27) & 0x1; |
| table[i].Total_frame_size = tmp & 0x7ffffff; |
| |
| /* Stub unwinds are handled elsewhere. */ |
| table[i].stub_unwind.stub_type = 0; |
| table[i].stub_unwind.padding = 0; |
| } |
| } |
| } |
| |
| /* Read in the backtrace information stored in the `$UNWIND_START$' section of |
| the object file. This info is used mainly by find_unwind_entry() to find |
| out the stack frame size and frame pointer used by procedures. We put |
| everything on the psymbol obstack in the objfile so that it automatically |
| gets freed when the objfile is destroyed. */ |
| |
| static void |
| read_unwind_info (objfile) |
| struct objfile *objfile; |
| { |
| asection *unwind_sec, *elf_unwind_sec, *stub_unwind_sec; |
| unsigned unwind_size, elf_unwind_size, stub_unwind_size, total_size; |
| unsigned index, unwind_entries, elf_unwind_entries; |
| unsigned stub_entries, total_entries; |
| CORE_ADDR text_offset; |
| struct obj_unwind_info *ui; |
| obj_private_data_t *obj_private; |
| |
| text_offset = ANOFFSET (objfile->section_offsets, 0); |
| ui = (struct obj_unwind_info *)obstack_alloc (&objfile->psymbol_obstack, |
| sizeof (struct obj_unwind_info)); |
| |
| ui->table = NULL; |
| ui->cache = NULL; |
| ui->last = -1; |
| |
| /* Get hooks to all unwind sections. Note there is no linker-stub unwind |
| section in ELF at the moment. */ |
| unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_START$"); |
| elf_unwind_sec = bfd_get_section_by_name (objfile->obfd, ".PARISC.unwind"); |
| stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$"); |
| |
| /* Get sizes and unwind counts for all sections. */ |
| if (unwind_sec) |
| { |
| unwind_size = bfd_section_size (objfile->obfd, unwind_sec); |
| unwind_entries = unwind_size / UNWIND_ENTRY_SIZE; |
| } |
| else |
| { |
| unwind_size = 0; |
| unwind_entries = 0; |
| } |
| |
| if (elf_unwind_sec) |
| { |
| elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec); /* purecov: deadcode */ |
| elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE; /* purecov: deadcode */ |
| } |
| else |
| { |
| elf_unwind_size = 0; |
| elf_unwind_entries = 0; |
| } |
| |
| if (stub_unwind_sec) |
| { |
| stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec); |
| stub_entries = stub_unwind_size / STUB_UNWIND_ENTRY_SIZE; |
| } |
| else |
| { |
| stub_unwind_size = 0; |
| stub_entries = 0; |
| } |
| |
| /* Compute total number of unwind entries and their total size. */ |
| total_entries = unwind_entries + elf_unwind_entries + stub_entries; |
| total_size = total_entries * sizeof (struct unwind_table_entry); |
| |
| /* Allocate memory for the unwind table. */ |
| ui->table = (struct unwind_table_entry *) |
| obstack_alloc (&objfile->psymbol_obstack, total_size); |
| ui->last = total_entries - 1; |
| |
| /* Internalize the standard unwind entries. */ |
| index = 0; |
| internalize_unwinds (objfile, &ui->table[index], unwind_sec, |
| unwind_entries, unwind_size, text_offset); |
| index += unwind_entries; |
| internalize_unwinds (objfile, &ui->table[index], elf_unwind_sec, |
| elf_unwind_entries, elf_unwind_size, text_offset); |
| index += elf_unwind_entries; |
| |
| /* Now internalize the stub unwind entries. */ |
| if (stub_unwind_size > 0) |
| { |
| unsigned int i; |
| char *buf = alloca (stub_unwind_size); |
| |
| /* Read in the stub unwind entries. */ |
| bfd_get_section_contents (objfile->obfd, stub_unwind_sec, buf, |
| 0, stub_unwind_size); |
| |
| /* Now convert them into regular unwind entries. */ |
| for (i = 0; i < stub_entries; i++, index++) |
| { |
| /* Clear out the next unwind entry. */ |
| memset (&ui->table[index], 0, sizeof (struct unwind_table_entry)); |
| |
| /* Convert offset & size into region_start and region_end. |
| Stuff away the stub type into "reserved" fields. */ |
| ui->table[index].region_start = bfd_get_32 (objfile->obfd, |
| (bfd_byte *) buf); |
| ui->table[index].region_start += text_offset; |
| buf += 4; |
| ui->table[index].stub_unwind.stub_type = bfd_get_8 (objfile->obfd, |
| (bfd_byte *) buf); |
| buf += 2; |
| ui->table[index].region_end |
| = ui->table[index].region_start + 4 * |
| (bfd_get_16 (objfile->obfd, (bfd_byte *) buf) - 1); |
| buf += 2; |
| } |
| |
| } |
| |
| /* Unwind table needs to be kept sorted. */ |
| qsort (ui->table, total_entries, sizeof (struct unwind_table_entry), |
| compare_unwind_entries); |
| |
| /* Keep a pointer to the unwind information. */ |
| if(objfile->obj_private == NULL) |
| { |
| obj_private = (obj_private_data_t *) |
| obstack_alloc(&objfile->psymbol_obstack, |
| sizeof(obj_private_data_t)); |
| obj_private->unwind_info = NULL; |
| obj_private->so_info = NULL; |
| |
| objfile->obj_private = (PTR) obj_private; |
| } |
| obj_private = (obj_private_data_t *)objfile->obj_private; |
| obj_private->unwind_info = ui; |
| } |
| |
| /* Lookup the unwind (stack backtrace) info for the given PC. We search all |
| of the objfiles seeking the unwind table entry for this PC. Each objfile |
| contains a sorted list of struct unwind_table_entry. Since we do a binary |
| search of the unwind tables, we depend upon them to be sorted. */ |
| |
| struct unwind_table_entry * |
| find_unwind_entry(pc) |
| CORE_ADDR pc; |
| { |
| int first, middle, last; |
| struct objfile *objfile; |
| |
| /* A function at address 0? Not in HP-UX! */ |
| if (pc == (CORE_ADDR) 0) |
| return NULL; |
| |
| ALL_OBJFILES (objfile) |
| { |
| struct obj_unwind_info *ui; |
| ui = NULL; |
| if (objfile->obj_private) |
| ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info; |
| |
| if (!ui) |
| { |
| read_unwind_info (objfile); |
| if (objfile->obj_private == NULL) |
| error ("Internal error reading unwind information."); /* purecov: deadcode */ |
| ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info; |
| } |
| |
| /* First, check the cache */ |
| |
| if (ui->cache |
| && pc >= ui->cache->region_start |
| && pc <= ui->cache->region_end) |
| return ui->cache; |
| |
| /* Not in the cache, do a binary search */ |
| |
| first = 0; |
| last = ui->last; |
| |
| while (first <= last) |
| { |
| middle = (first + last) / 2; |
| if (pc >= ui->table[middle].region_start |
| && pc <= ui->table[middle].region_end) |
| { |
| ui->cache = &ui->table[middle]; |
| return &ui->table[middle]; |
| } |
| |
| if (pc < ui->table[middle].region_start) |
| last = middle - 1; |
| else |
| first = middle + 1; |
| } |
| } /* ALL_OBJFILES() */ |
| return NULL; |
| } |
| |
| /* Return the adjustment necessary to make for addresses on the stack |
| as presented by hpread.c. |
| |
| This is necessary because of the stack direction on the PA and the |
| bizarre way in which someone (?) decided they wanted to handle |
| frame pointerless code in GDB. */ |
| int |
| hpread_adjust_stack_address (func_addr) |
| CORE_ADDR func_addr; |
| { |
| struct unwind_table_entry *u; |
| |
| u = find_unwind_entry (func_addr); |
| if (!u) |
| return 0; |
| else |
| return u->Total_frame_size << 3; |
| } |
| |
| /* Called to determine if PC is in an interrupt handler of some |
| kind. */ |
| |
| static int |
| pc_in_interrupt_handler (pc) |
| CORE_ADDR pc; |
| { |
| struct unwind_table_entry *u; |
| struct minimal_symbol *msym_us; |
| |
| u = find_unwind_entry (pc); |
| if (!u) |
| return 0; |
| |
| /* Oh joys. HPUX sets the interrupt bit for _sigreturn even though |
| its frame isn't a pure interrupt frame. Deal with this. */ |
| msym_us = lookup_minimal_symbol_by_pc (pc); |
| |
| return u->HP_UX_interrupt_marker && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us)); |
| } |
| |
| /* Called when no unwind descriptor was found for PC. Returns 1 if it |
| appears that PC is in a linker stub. */ |
| |
| static int |
| pc_in_linker_stub (pc) |
| CORE_ADDR pc; |
| { |
| int found_magic_instruction = 0; |
| int i; |
| char buf[4]; |
| |
| /* If unable to read memory, assume pc is not in a linker stub. */ |
| if (target_read_memory (pc, buf, 4) != 0) |
| return 0; |
| |
| /* We are looking for something like |
| |
| ; $$dyncall jams RP into this special spot in the frame (RP') |
| ; before calling the "call stub" |
| ldw -18(sp),rp |
| |
| ldsid (rp),r1 ; Get space associated with RP into r1 |
| mtsp r1,sp ; Move it into space register 0 |
| be,n 0(sr0),rp) ; back to your regularly scheduled program */ |
| |
| /* Maximum known linker stub size is 4 instructions. Search forward |
| from the given PC, then backward. */ |
| for (i = 0; i < 4; i++) |
| { |
| /* If we hit something with an unwind, stop searching this direction. */ |
| |
| if (find_unwind_entry (pc + i * 4) != 0) |
| break; |
| |
| /* Check for ldsid (rp),r1 which is the magic instruction for a |
| return from a cross-space function call. */ |
| if (read_memory_integer (pc + i * 4, 4) == 0x004010a1) |
| { |
| found_magic_instruction = 1; |
| break; |
| } |
| /* Add code to handle long call/branch and argument relocation stubs |
| here. */ |
| } |
| |
| if (found_magic_instruction != 0) |
| return 1; |
| |
| /* Now look backward. */ |
| for (i = 0; i < 4; i++) |
| { |
| /* If we hit something with an unwind, stop searching this direction. */ |
| |
| if (find_unwind_entry (pc - i * 4) != 0) |
| break; |
| |
| /* Check for ldsid (rp),r1 which is the magic instruction for a |
| return from a cross-space function call. */ |
| if (read_memory_integer (pc - i * 4, 4) == 0x004010a1) |
| { |
| found_magic_instruction = 1; |
| break; |
| } |
| /* Add code to handle long call/branch and argument relocation stubs |
| here. */ |
| } |
| return found_magic_instruction; |
| } |
| |
| static int |
| find_return_regnum(pc) |
| CORE_ADDR pc; |
| { |
| struct unwind_table_entry *u; |
| |
| u = find_unwind_entry (pc); |
| |
| if (!u) |
| return RP_REGNUM; |
| |
| if (u->Millicode) |
| return 31; |
| |
| return RP_REGNUM; |
| } |
| |
| /* Return size of frame, or -1 if we should use a frame pointer. */ |
| static int |
| find_proc_framesize (pc) |
| CORE_ADDR pc; |
| { |
| struct unwind_table_entry *u; |
| struct minimal_symbol *msym_us; |
| |
| /* This may indicate a bug in our callers... */ |
| if (pc == (CORE_ADDR)0) |
| return -1; |
| |
| u = find_unwind_entry (pc); |
| |
| if (!u) |
| { |
| if (pc_in_linker_stub (pc)) |
| /* Linker stubs have a zero size frame. */ |
| return 0; |
| else |
| return -1; |
| } |
| |
| msym_us = lookup_minimal_symbol_by_pc (pc); |
| |
| /* If Save_SP is set, and we're not in an interrupt or signal caller, |
| then we have a frame pointer. Use it. */ |
| if (u->Save_SP && !pc_in_interrupt_handler (pc) |
| && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us))) |
| return -1; |
| |
| return u->Total_frame_size << 3; |
| } |
| |
| /* Return offset from sp at which rp is saved, or 0 if not saved. */ |
| static int rp_saved PARAMS ((CORE_ADDR)); |
| |
| static int |
| rp_saved (pc) |
| CORE_ADDR pc; |
| { |
| struct unwind_table_entry *u; |
| |
| /* A function at, and thus a return PC from, address 0? Not in HP-UX! */ |
| if (pc == (CORE_ADDR) 0) |
| return 0; |
| |
| u = find_unwind_entry (pc); |
| |
| if (!u) |
| { |
| if (pc_in_linker_stub (pc)) |
| /* This is the so-called RP'. */ |
| return -24; |
| else |
| return 0; |
| } |
| |
| if (u->Save_RP) |
| return -20; |
| else if (u->stub_unwind.stub_type != 0) |
| { |
| switch (u->stub_unwind.stub_type) |
| { |
| case EXPORT: |
| case IMPORT: |
| return -24; |
| case PARAMETER_RELOCATION: |
| return -8; |
| default: |
| return 0; |
| } |
| } |
| else |
| return 0; |
| } |
| |
| int |
| frameless_function_invocation (frame) |
| struct frame_info *frame; |
| { |
| struct unwind_table_entry *u; |
| |
| u = find_unwind_entry (frame->pc); |
| |
| if (u == 0) |
| return 0; |
| |
| return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0); |
| } |
| |
| CORE_ADDR |
| saved_pc_after_call (frame) |
| struct frame_info *frame; |
| { |
| int ret_regnum; |
| CORE_ADDR pc; |
| struct unwind_table_entry *u; |
| |
| ret_regnum = find_return_regnum (get_frame_pc (frame)); |
| pc = read_register (ret_regnum) & ~0x3; |
| |
| /* If PC is in a linker stub, then we need to dig the address |
| the stub will return to out of the stack. */ |
| u = find_unwind_entry (pc); |
| if (u && u->stub_unwind.stub_type != 0) |
| return FRAME_SAVED_PC (frame); |
| else |
| return pc; |
| } |
| |
| CORE_ADDR |
| hppa_frame_saved_pc (frame) |
| struct frame_info *frame; |
| { |
| CORE_ADDR pc = get_frame_pc (frame); |
| struct unwind_table_entry *u; |
| CORE_ADDR old_pc; |
| int spun_around_loop = 0; |
| int rp_offset = 0; |
| |
| /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner |
| at the base of the frame in an interrupt handler. Registers within |
| are saved in the exact same order as GDB numbers registers. How |
| convienent. */ |
| if (pc_in_interrupt_handler (pc)) |
| return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3; |
| |
| #ifdef FRAME_SAVED_PC_IN_SIGTRAMP |
| /* Deal with signal handler caller frames too. */ |
| if (frame->signal_handler_caller) |
| { |
| CORE_ADDR rp; |
| FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp); |
| return rp & ~0x3; |
| } |
| #endif |
| |
| if (frameless_function_invocation (frame)) |
| { |
| int ret_regnum; |
| |
| ret_regnum = find_return_regnum (pc); |
| |
| /* If the next frame is an interrupt frame or a signal |
| handler caller, then we need to look in the saved |
| register area to get the return pointer (the values |
| in the registers may not correspond to anything useful). */ |
| if (frame->next |
| && (frame->next->signal_handler_caller |
| || pc_in_interrupt_handler (frame->next->pc))) |
| { |
| struct frame_saved_regs saved_regs; |
| |
| get_frame_saved_regs (frame->next, &saved_regs); |
| if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2) |
| { |
| pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3; |
| |
| /* Syscalls are really two frames. The syscall stub itself |
| with a return pointer in %rp and the kernel call with |
| a return pointer in %r31. We return the %rp variant |
| if %r31 is the same as frame->pc. */ |
| if (pc == frame->pc) |
| pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3; |
| } |
| else |
| pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3; |
| } |
| else |
| pc = read_register (ret_regnum) & ~0x3; |
| } |
| else |
| { |
| spun_around_loop = 0; |
| old_pc = pc; |
| |
| restart: |
| rp_offset = rp_saved (pc); |
| |
| /* Similar to code in frameless function case. If the next |
| frame is a signal or interrupt handler, then dig the right |
| information out of the saved register info. */ |
| if (rp_offset == 0 |
| && frame->next |
| && (frame->next->signal_handler_caller |
| || pc_in_interrupt_handler (frame->next->pc))) |
| { |
| struct frame_saved_regs saved_regs; |
| |
| get_frame_saved_regs (frame->next, &saved_regs); |
| if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2) |
| { |
| pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3; |
| |
| /* Syscalls are really two frames. The syscall stub itself |
| with a return pointer in %rp and the kernel call with |
| a return pointer in %r31. We return the %rp variant |
| if %r31 is the same as frame->pc. */ |
| if (pc == frame->pc) |
| pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3; |
| } |
| else |
| pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3; |
| } |
| else if (rp_offset == 0) |
| { |
| old_pc = pc; |
| pc = read_register (RP_REGNUM) & ~0x3; |
| } |
| else |
| { |
| old_pc = pc; |
| pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3; |
| } |
| } |
| |
| /* If PC is inside a linker stub, then dig out the address the stub |
| will return to. |
| |
| Don't do this for long branch stubs. Why? For some unknown reason |
| _start is marked as a long branch stub in hpux10. */ |
| u = find_unwind_entry (pc); |
| if (u && u->stub_unwind.stub_type != 0 |
| && u->stub_unwind.stub_type != LONG_BRANCH) |
| { |
| unsigned int insn; |
| |
| /* If this is a dynamic executable, and we're in a signal handler, |
| then the call chain will eventually point us into the stub for |
| _sigreturn. Unlike most cases, we'll be pointed to the branch |
| to the real sigreturn rather than the code after the real branch!. |
| |
| Else, try to dig the address the stub will return to in the normal |
| fashion. */ |
| insn = read_memory_integer (pc, 4); |
| if ((insn & 0xfc00e000) == 0xe8000000) |
| return (pc + extract_17 (insn) + 8) & ~0x3; |
| else |
| { |
| if (old_pc == pc) |
| spun_around_loop++; |
| |
| if (spun_around_loop > 1) |
| { |
| /* We're just about to go around the loop again with |
| no more hope of success. Die. */ |
| error("Unable to find return pc for this frame"); |
| } |
| else |
| goto restart; |
| } |
| } |
| |
| return pc; |
| } |
| |
| /* We need to correct the PC and the FP for the outermost frame when we are |
| in a system call. */ |
| |
| void |
| init_extra_frame_info (fromleaf, frame) |
| int fromleaf; |
| struct frame_info *frame; |
| { |
| int flags; |
| int framesize; |
| |
| if (frame->next && !fromleaf) |
| return; |
| |
| /* If the next frame represents a frameless function invocation |
| then we have to do some adjustments that are normally done by |
| FRAME_CHAIN. (FRAME_CHAIN is not called in this case.) */ |
| if (fromleaf) |
| { |
| /* Find the framesize of *this* frame without peeking at the PC |
| in the current frame structure (it isn't set yet). */ |
| framesize = find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame))); |
| |
| /* Now adjust our base frame accordingly. If we have a frame pointer |
| use it, else subtract the size of this frame from the current |
| frame. (we always want frame->frame to point at the lowest address |
| in the frame). */ |
| if (framesize == -1) |
| frame->frame = TARGET_READ_FP (); |
| else |
| frame->frame -= framesize; |
| return; |
| } |
| |
| flags = read_register (FLAGS_REGNUM); |
| if (flags & 2) /* In system call? */ |
| frame->pc = read_register (31) & ~0x3; |
| |
| /* The outermost frame is always derived from PC-framesize |
| |
| One might think frameless innermost frames should have |
| a frame->frame that is the same as the parent's frame->frame. |
| That is wrong; frame->frame in that case should be the *high* |
| address of the parent's frame. It's complicated as hell to |
| explain, but the parent *always* creates some stack space for |
| the child. So the child actually does have a frame of some |
| sorts, and its base is the high address in its parent's frame. */ |
| framesize = find_proc_framesize(frame->pc); |
| if (framesize == -1) |
| frame->frame = TARGET_READ_FP (); |
| else |
| frame->frame = read_register (SP_REGNUM) - framesize; |
| } |
| |
| /* Given a GDB frame, determine the address of the calling function's frame. |
| This will be used to create a new GDB frame struct, and then |
| INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. |
| |
| This may involve searching through prologues for several functions |
| at boundaries where GCC calls HP C code, or where code which has |
| a frame pointer calls code without a frame pointer. */ |
| |
| CORE_ADDR |
| frame_chain (frame) |
| struct frame_info *frame; |
| { |
| int my_framesize, caller_framesize; |
| struct unwind_table_entry *u; |
| CORE_ADDR frame_base; |
| struct frame_info *tmp_frame; |
| |
| CORE_ADDR caller_pc; |
| |
| struct minimal_symbol *min_frame_symbol; |
| struct symbol *frame_symbol; |
| char *frame_symbol_name; |
| |
| /* If this is a threaded application, and we see the |
| routine "__pthread_exit", treat it as the stack root |
| for this thread. */ |
| min_frame_symbol = lookup_minimal_symbol_by_pc (frame->pc); |
| frame_symbol = find_pc_function(frame->pc); |
| |
| if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */) |
| { |
| /* The test above for "no user function name" would defend |
| against the slim likelihood that a user might define a |
| routine named "__pthread_exit" and then try to debug it. |
| |
| If it weren't commented out, and you tried to debug the |
| pthread library itself, you'd get errors. |
| |
| So for today, we don't make that check. */ |
| frame_symbol_name = SYMBOL_NAME(min_frame_symbol); |
| if (frame_symbol_name != 0) { |
| if (0 == strncmp(frame_symbol_name, |
| THREAD_INITIAL_FRAME_SYMBOL, |
| THREAD_INITIAL_FRAME_SYM_LEN)) { |
| /* Pretend we've reached the bottom of the stack. */ |
| return (CORE_ADDR) 0; |
| } |
| } |
| } /* End of hacky code for threads. */ |
| |
| /* Handle HPUX, BSD, and OSF1 style interrupt frames first. These |
| are easy; at *sp we have a full save state strucutre which we can |
| pull the old stack pointer from. Also see frame_saved_pc for |
| code to dig a saved PC out of the save state structure. */ |
| if (pc_in_interrupt_handler (frame->pc)) |
| frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4); |
| #ifdef FRAME_BASE_BEFORE_SIGTRAMP |
| else if (frame->signal_handler_caller) |
| { |
| FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base); |
| } |
| #endif |
| else |
| frame_base = frame->frame; |
| |
| /* Get frame sizes for the current frame and the frame of the |
| caller. */ |
| my_framesize = find_proc_framesize (frame->pc); |
| caller_pc = FRAME_SAVED_PC(frame); |
| |
| /* If we can't determine the caller's PC, then it's not likely we can |
| really determine anything meaningful about its frame. We'll consider |
| this to be stack bottom. */ |
| if (caller_pc == (CORE_ADDR) 0) |
| return (CORE_ADDR) 0; |
| |
| caller_framesize = find_proc_framesize (FRAME_SAVED_PC(frame)); |
| |
| /* If caller does not have a frame pointer, then its frame |
| can be found at current_frame - caller_framesize. */ |
| if (caller_framesize != -1) |
| { |
| return frame_base - caller_framesize; |
| } |
| /* Both caller and callee have frame pointers and are GCC compiled |
| (SAVE_SP bit in unwind descriptor is on for both functions. |
| The previous frame pointer is found at the top of the current frame. */ |
| if (caller_framesize == -1 && my_framesize == -1) |
| { |
| return read_memory_integer (frame_base, 4); |
| } |
| /* Caller has a frame pointer, but callee does not. This is a little |
| more difficult as GCC and HP C lay out locals and callee register save |
| areas very differently. |
| |
| The previous frame pointer could be in a register, or in one of |
| several areas on the stack. |
| |
| Walk from the current frame to the innermost frame examining |
| unwind descriptors to determine if %r3 ever gets saved into the |
| stack. If so return whatever value got saved into the stack. |
| If it was never saved in the stack, then the value in %r3 is still |
| valid, so use it. |
| |
| We use information from unwind descriptors to determine if %r3 |
| is saved into the stack (Entry_GR field has this information). */ |
| |
| tmp_frame = frame; |
| while (tmp_frame) |
| { |
| u = find_unwind_entry (tmp_frame->pc); |
| |
| if (!u) |
| { |
| /* We could find this information by examining prologues. I don't |
| think anyone has actually written any tools (not even "strip") |
| which leave them out of an executable, so maybe this is a moot |
| point. */ |
| /* ??rehrauer: Actually, it's quite possible to stepi your way into |
| code that doesn't have unwind entries. For example, stepping into |
| the dynamic linker will give you a PC that has none. Thus, I've |
| disabled this warning. */ |
| #if 0 |
| warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame->pc); |
| #endif |
| return (CORE_ADDR) 0; |
| } |
| |
| /* Entry_GR specifies the number of callee-saved general registers |
| saved in the stack. It starts at %r3, so %r3 would be 1. */ |
| if (u->Entry_GR >= 1 || u->Save_SP |
| || tmp_frame->signal_handler_caller |
| || pc_in_interrupt_handler (tmp_frame->pc)) |
| break; |
| else |
| tmp_frame = tmp_frame->next; |
| } |
| |
| if (tmp_frame) |
| { |
| /* We may have walked down the chain into a function with a frame |
| pointer. */ |
| if (u->Save_SP |
| && !tmp_frame->signal_handler_caller |
| && !pc_in_interrupt_handler (tmp_frame->pc)) |
| { |
| return read_memory_integer (tmp_frame->frame, 4); |
| } |
| /* %r3 was saved somewhere in the stack. Dig it out. */ |
| else |
| { |
| struct frame_saved_regs saved_regs; |
| |
| /* Sick. |
| |
| For optimization purposes many kernels don't have the |
| callee saved registers into the save_state structure upon |
| entry into the kernel for a syscall; the optimization |
| is usually turned off if the process is being traced so |
| that the debugger can get full register state for the |
| process. |
| |
| This scheme works well except for two cases: |
| |
| * Attaching to a process when the process is in the |
| kernel performing a system call (debugger can't get |
| full register state for the inferior process since |
| the process wasn't being traced when it entered the |
| system call). |
| |
| * Register state is not complete if the system call |
| causes the process to core dump. |
| |
| |
| The following heinous code is an attempt to deal with |
| the lack of register state in a core dump. It will |
| fail miserably if the function which performs the |
| system call has a variable sized stack frame. */ |
| |
| get_frame_saved_regs (tmp_frame, &saved_regs); |
| |
| /* Abominable hack. */ |
| if (current_target.to_has_execution == 0 |
| && ((saved_regs.regs[FLAGS_REGNUM] |
| && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) |
| & 0x2)) |
| || (saved_regs.regs[FLAGS_REGNUM] == 0 |
| && read_register (FLAGS_REGNUM) & 0x2))) |
| { |
| u = find_unwind_entry (FRAME_SAVED_PC (frame)); |
| if (!u) |
| { |
| return read_memory_integer (saved_regs.regs[FP_REGNUM], 4); |
| } |
| else |
| { |
| return frame_base - (u->Total_frame_size << 3); |
| } |
| } |
| |
| return read_memory_integer (saved_regs.regs[FP_REGNUM], 4); |
| } |
| } |
| else |
| { |
| struct frame_saved_regs saved_regs; |
| |
| /* Get the innermost frame. */ |
| tmp_frame = frame; |
| while (tmp_frame->next != NULL) |
| tmp_frame = tmp_frame->next; |
| |
| get_frame_saved_regs (tmp_frame, &saved_regs); |
| /* Abominable hack. See above. */ |
| if (current_target.to_has_execution == 0 |
| && ((saved_regs.regs[FLAGS_REGNUM] |
| && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) |
| & 0x2)) |
| || (saved_regs.regs[FLAGS_REGNUM] == 0 |
| && read_register (FLAGS_REGNUM) & 0x2))) |
| { |
| u = find_unwind_entry (FRAME_SAVED_PC (frame)); |
| if (!u) |
| { |
| return read_memory_integer (saved_regs.regs[FP_REGNUM], 4); |
| } |
| else |
| { |
| return frame_base - (u->Total_frame_size << 3); |
| } |
| } |
| |
| /* The value in %r3 was never saved into the stack (thus %r3 still |
| holds the value of the previous frame pointer). */ |
| return TARGET_READ_FP (); |
| } |
| } |
| |
| |
| /* To see if a frame chain is valid, see if the caller looks like it |
| was compiled with gcc. */ |
| |
| int |
| hppa_frame_chain_valid (chain, thisframe) |
| CORE_ADDR chain; |
| struct frame_info *thisframe; |
| { |
| struct minimal_symbol *msym_us; |
| struct minimal_symbol *msym_start; |
| struct unwind_table_entry *u, *next_u = NULL; |
| struct frame_info *next; |
| |
| if (!chain) |
| return 0; |
| |
| u = find_unwind_entry (thisframe->pc); |
| |
| if (u == NULL) |
| return 1; |
| |
| /* We can't just check that the same of msym_us is "_start", because |
| someone idiotically decided that they were going to make a Ltext_end |
| symbol with the same address. This Ltext_end symbol is totally |
| indistinguishable (as nearly as I can tell) from the symbol for a function |
| which is (legitimately, since it is in the user's namespace) |
| named Ltext_end, so we can't just ignore it. */ |
| msym_us = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe)); |
| msym_start = lookup_minimal_symbol ("_start", NULL, NULL); |
| if (msym_us |
| && msym_start |
| && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start)) |
| return 0; |
| |
| /* Grrrr. Some new idiot decided that they don't want _start for the |
| PRO configurations; $START$ calls main directly.... Deal with it. */ |
| msym_start = lookup_minimal_symbol ("$START$", NULL, NULL); |
| if (msym_us |
| && msym_start |
| && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start)) |
| return 0; |
| |
| next = get_next_frame (thisframe); |
| if (next) |
| next_u = find_unwind_entry (next->pc); |
| |
| /* If this frame does not save SP, has no stack, isn't a stub, |
| and doesn't "call" an interrupt routine or signal handler caller, |
| then its not valid. */ |
| if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0 |
| || (thisframe->next && thisframe->next->signal_handler_caller) |
| || (next_u && next_u->HP_UX_interrupt_marker)) |
| return 1; |
| |
| if (pc_in_linker_stub (thisframe->pc)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| These functions deal with saving and restoring register state |
| around a function call in the inferior. They keep the stack |
| double-word aligned; eventually, on an hp700, the stack will have |
| to be aligned to a 64-byte boundary. */ |
| |
| void |
| push_dummy_frame (inf_status) |
| struct inferior_status *inf_status; |
| { |
| CORE_ADDR sp, pc, pcspace; |
| register int regnum; |
| int int_buffer; |
| double freg_buffer; |
| |
| /* Oh, what a hack. If we're trying to perform an inferior call |
| while the inferior is asleep, we have to make sure to clear |
| the "in system call" bit in the flag register (the call will |
| start after the syscall returns, so we're no longer in the system |
| call!) This state is kept in "inf_status", change it there. |
| |
| We also need a number of horrid hacks to deal with lossage in the |
| PC queue registers (apparently they're not valid when the in syscall |
| bit is set). */ |
| pc = target_read_pc (inferior_pid); |
| int_buffer = read_register (FLAGS_REGNUM); |
| if (int_buffer & 0x2) |
| { |
| unsigned int sid; |
| int_buffer &= ~0x2; |
| write_inferior_status_register (inf_status, 0, int_buffer); |
| write_inferior_status_register (inf_status, PCOQ_HEAD_REGNUM, pc + 0); |
| write_inferior_status_register (inf_status, PCOQ_TAIL_REGNUM, pc + 4); |
| sid = (pc >> 30) & 0x3; |
| if (sid == 0) |
| pcspace = read_register (SR4_REGNUM); |
| else |
| pcspace = read_register (SR4_REGNUM + 4 + sid); |
| write_inferior_status_register (inf_status, PCSQ_HEAD_REGNUM, pcspace); |
| write_inferior_status_register (inf_status, PCSQ_TAIL_REGNUM, pcspace); |
| } |
| else |
| pcspace = read_register (PCSQ_HEAD_REGNUM); |
| |
| /* Space for "arguments"; the RP goes in here. */ |
| sp = read_register (SP_REGNUM) + 48; |
| int_buffer = read_register (RP_REGNUM) | 0x3; |
| write_memory (sp - 20, (char *)&int_buffer, 4); |
| |
| int_buffer = TARGET_READ_FP (); |
| write_memory (sp, (char *)&int_buffer, 4); |
| |
| write_register (FP_REGNUM, sp); |
| |
| sp += 8; |
| |
| for (regnum = 1; regnum < 32; regnum++) |
| if (regnum != RP_REGNUM && regnum != FP_REGNUM) |
| sp = push_word (sp, read_register (regnum)); |
| |
| sp += 4; |
| |
| for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++) |
| { |
| read_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8); |
| sp = push_bytes (sp, (char *)&freg_buffer, 8); |
| } |
| sp = push_word (sp, read_register (IPSW_REGNUM)); |
| sp = push_word (sp, read_register (SAR_REGNUM)); |
| sp = push_word (sp, pc); |
| sp = push_word (sp, pcspace); |
| sp = push_word (sp, pc + 4); |
| sp = push_word (sp, pcspace); |
| write_register (SP_REGNUM, sp); |
| } |
| |
| static void |
| find_dummy_frame_regs (frame, frame_saved_regs) |
| struct frame_info *frame; |
| struct frame_saved_regs *frame_saved_regs; |
| { |
| CORE_ADDR fp = frame->frame; |
| int i; |
| |
| frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3; |
| frame_saved_regs->regs[FP_REGNUM] = fp; |
| frame_saved_regs->regs[1] = fp + 8; |
| |
| for (fp += 12, i = 3; i < 32; i++) |
| { |
| if (i != FP_REGNUM) |
| { |
| frame_saved_regs->regs[i] = fp; |
| fp += 4; |
| } |
| } |
| |
| fp += 4; |
| for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8) |
| frame_saved_regs->regs[i] = fp; |
| |
| frame_saved_regs->regs[IPSW_REGNUM] = fp; |
| frame_saved_regs->regs[SAR_REGNUM] = fp + 4; |
| frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 8; |
| frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 12; |
| frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 16; |
| frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 20; |
| } |
| |
| void |
| hppa_pop_frame () |
| { |
| register struct frame_info *frame = get_current_frame (); |
| register CORE_ADDR fp, npc, target_pc; |
| register int regnum; |
| struct frame_saved_regs fsr; |
| double freg_buffer; |
| |
| fp = FRAME_FP (frame); |
| get_frame_saved_regs (frame, &fsr); |
| |
| #ifndef NO_PC_SPACE_QUEUE_RESTORE |
| if (fsr.regs[IPSW_REGNUM]) /* Restoring a call dummy frame */ |
| restore_pc_queue (&fsr); |
| #endif |
| |
| for (regnum = 31; regnum > 0; regnum--) |
| if (fsr.regs[regnum]) |
| write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); |
| |
| for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM ; regnum--) |
| if (fsr.regs[regnum]) |
| { |
| read_memory (fsr.regs[regnum], (char *)&freg_buffer, 8); |
| write_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8); |
| } |
| |
| if (fsr.regs[IPSW_REGNUM]) |
| write_register (IPSW_REGNUM, |
| read_memory_integer (fsr.regs[IPSW_REGNUM], 4)); |
| |
| if (fsr.regs[SAR_REGNUM]) |
| write_register (SAR_REGNUM, |
| read_memory_integer (fsr.regs[SAR_REGNUM], 4)); |
| |
| /* If the PC was explicitly saved, then just restore it. */ |
| if (fsr.regs[PCOQ_TAIL_REGNUM]) |
| { |
| npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4); |
| write_register (PCOQ_TAIL_REGNUM, npc); |
| } |
| /* Else use the value in %rp to set the new PC. */ |
| else |
| { |
| npc = read_register (RP_REGNUM); |
| write_pc (npc); |
| } |
| |
| write_register (FP_REGNUM, read_memory_integer (fp, 4)); |
| |
| if (fsr.regs[IPSW_REGNUM]) /* call dummy */ |
| write_register (SP_REGNUM, fp - 48); |
| else |
| write_register (SP_REGNUM, fp); |
| |
| /* The PC we just restored may be inside a return trampoline. If so |
| we want to restart the inferior and run it through the trampoline. |
| |
| Do this by setting a momentary breakpoint at the location the |
| trampoline returns to. |
| |
| Don't skip through the trampoline if we're popping a dummy frame. */ |
| target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3; |
| if (target_pc && !fsr.regs[IPSW_REGNUM]) |
| { |
| struct symtab_and_line sal; |
| struct breakpoint *breakpoint; |
| struct cleanup *old_chain; |
| |
| /* Set up our breakpoint. Set it to be silent as the MI code |
| for "return_command" will print the frame we returned to. */ |
| sal = find_pc_line (target_pc, 0); |
| sal.pc = target_pc; |
| breakpoint = set_momentary_breakpoint (sal, NULL, bp_finish); |
| breakpoint->silent = 1; |
| |
| /* So we can clean things up. */ |
| old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint); |
| |
| /* Start up the inferior. */ |
| clear_proceed_status (); |
| proceed_to_finish = 1; |
| proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); |
| |
| /* Perform our cleanups. */ |
| do_cleanups (old_chain); |
| } |
| flush_cached_frames (); |
| } |
| |
| /* After returning to a dummy on the stack, restore the instruction |
| queue space registers. */ |
| |
| static int |
| restore_pc_queue (fsr) |
| struct frame_saved_regs *fsr; |
| { |
| CORE_ADDR pc = read_pc (); |
| CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], 4); |
| struct target_waitstatus w; |
| int insn_count; |
| |
| /* Advance past break instruction in the call dummy. */ |
| write_register (PCOQ_HEAD_REGNUM, pc + 4); |
| write_register (PCOQ_TAIL_REGNUM, pc + 8); |
| |
| /* HPUX doesn't let us set the space registers or the space |
| registers of the PC queue through ptrace. Boo, hiss. |
| Conveniently, the call dummy has this sequence of instructions |
| after the break: |
| mtsp r21, sr0 |
| ble,n 0(sr0, r22) |
| |
| So, load up the registers and single step until we are in the |
| right place. */ |
| |
| write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], 4)); |
| write_register (22, new_pc); |
| |
| for (insn_count = 0; insn_count < 3; insn_count++) |
| { |
| /* FIXME: What if the inferior gets a signal right now? Want to |
| merge this into wait_for_inferior (as a special kind of |
| watchpoint? By setting a breakpoint at the end? Is there |
| any other choice? Is there *any* way to do this stuff with |
| ptrace() or some equivalent?). */ |
| resume (1, 0); |
| target_wait (inferior_pid, &w); |
| |
| if (w.kind == TARGET_WAITKIND_SIGNALLED) |
| { |
| stop_signal = w.value.sig; |
| terminal_ours_for_output (); |
| printf_unfiltered ("\nProgram terminated with signal %s, %s.\n", |
| target_signal_to_name (stop_signal), |
| target_signal_to_string (stop_signal)); |
| gdb_flush (gdb_stdout); |
| return 0; |
| } |
| } |
| target_terminal_ours (); |
| target_fetch_registers (-1); |
| return 1; |
| } |
| |
| #if 0 |
| CORE_ADDR |
| hppa_push_arguments (nargs, args, sp, struct_return, struct_addr) |
| int nargs; |
| value_ptr *args; |
| CORE_ADDR sp; |
| int struct_return; |
| CORE_ADDR struct_addr; |
| { |
| /* array of arguments' offsets */ |
| int *offset = (int *)alloca(nargs * sizeof (int)); |
| int cum = 0; |
| int i, alignment; |
| |
| for (i = 0; i < nargs; i++) |
| { |
| int x = 0; |
| /* cum is the sum of the lengths in bytes of |
| the arguments seen so far */ |
| cum += TYPE_LENGTH (VALUE_TYPE (args[i])); |
| |
| /* value must go at proper alignment. Assume alignment is a |
| power of two. */ |
| alignment = hppa_alignof (VALUE_TYPE (args[i])); |
| |
| if (cum % alignment) |
| cum = (cum + alignment) & -alignment; |
| offset[i] = -cum; |
| |
| } |
| sp += max ((cum + 7) & -8, 16); |
| |
| for (i = 0; i < nargs; i++) |
| write_memory (sp + offset[i], VALUE_CONTENTS (args[i]), |
| TYPE_LENGTH (VALUE_TYPE (args[i]))); |
| |
| if (struct_return) |
| write_register (28, struct_addr); |
| return sp + 32; |
| } |
| #endif |
| |
| /* elz: I am rewriting this function, because the one above is a very |
| obscure piece of code. |
| This function pushes the arguments on the stack. The stack grows up |
| on the PA. |
| Each argument goes in one (or more) word (4 bytes) on the stack. |
| The first four words for the args must be allocated, even if they |
| are not used. |
| The 'topmost' arg is arg0, the 'bottom-most' is arg3. (if you think of |
| them as 1 word long). |
| Below these there can be any number of arguments, as needed by the function. |
| If an arg is bigger than one word, it will be written on the stack |
| occupying as many words as needed. Args that are bigger than 64bits |
| are not copied on the stack, a pointer is passed instead. |
| |
| On top of the arg0 word there are other 8 words (32bytes) which are used |
| for other purposes */ |
| |
| CORE_ADDR |
| hppa_push_arguments (nargs, args, sp, struct_return, struct_addr) |
| int nargs; |
| value_ptr *args; |
| CORE_ADDR sp; |
| int struct_return; |
| CORE_ADDR struct_addr; |
| { |
| /* array of arguments' offsets */ |
| int *offset = (int *)alloca(nargs * sizeof (int)); |
| /* array of arguments' lengths: real lengths in bytes, not aligned to word size */ |
| int *lengths = (int *)alloca(nargs * sizeof (int)); |
| |
| int bytes_reserved; /* this is the number of bytes on the stack occupied by an |
| argument. This will be always a multiple of 4 */ |
| |
| int cum_bytes_reserved = 0; /* this is the total number of bytes reserved by the args |
| seen so far. It is a multiple of 4 always */ |
| int cum_bytes_aligned = 0; /* same as above, but aligned on 8 bytes */ |
| int i; |
| |
| /* When an arg does not occupy a whole word, for instance in bitfields: |
| if the arg is x bits (0<x<32), it must be written |
| starting from the (x-1)-th position down until the 0-th position. |
| It is enough to align it to the word. */ |
| /* if an arg occupies 8 bytes, it must be aligned on the 64-bits |
| high order word in odd arg word. */ |
| /* if an arg is larger than 64 bits, we need to pass a pointer to it, and |
| copy the actual value on the stack, so that the callee can play with it. |
| This is taken care of in valops.c in the call_function_by_hand function. |
| The argument that is received in this function here has already be converted |
| to a pointer to whatever is needed, so that it just can be pushed |
| as a word argument */ |
| |
| for (i = 0; i < nargs; i++) |
| { |
| |
| lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i])); |
| |
| if (lengths[i] % 4) |
| bytes_reserved = (lengths[i] / 4) * 4 + 4; |
| else |
| bytes_reserved = lengths[i]; |
| |
| offset[i] = cum_bytes_reserved + lengths[i]; |
| |
| if ((bytes_reserved == 8) && (offset[i] % 8)) /* if 64-bit arg is not 64 bit aligned */ |
| { |
| int new_offset=0; |
| /* bytes_reserved is already aligned to the word, so we put it at one word |
| more down the stack. This will leave one empty word on the |
| stack, and one unused register. This is OK, see the calling |
| convention doc */ |
| /* the offset may have to be moved to the corresponding position |
| one word down the stack, to maintain |
| alignment. */ |
| new_offset = (offset[i] / 8) * 8 + 8; |
| if ((new_offset - offset[i]) >=4) |
| { |
| bytes_reserved += 4; |
| offset[i] += 4; |
| } |
| } |
| |
| cum_bytes_reserved += bytes_reserved; |
| |
| } |
| |
| /* now move up the sp to reserve at least 4 words required for the args, |
| or more than this if needed */ |
| /* wee also need to keep the sp aligned to 8 bytes */ |
| cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved); |
| sp += max (cum_bytes_aligned, 16); |
| |
| /* now write each of the args at the proper offset down the stack */ |
| for (i = 0; i < nargs; i++) |
| write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]); |
| |
| |
| /* if a structure has to be returned, set up register 28 to hold its address */ |
| if (struct_return) |
| write_register (28, struct_addr); |
| |
| /* the stack will have other 8 words on top of the args */ |
| return sp + 32; |
| } |
| |
| |
| /* elz: this function returns a value which is built looking at the given address. |
| It is called from call_function_by_hand, in case we need to return a |
| value which is larger than 64 bits, and it is stored in the stack rather than |
| in the registers r28 and r29 or fr4. |
| This function does the same stuff as value_being_returned in values.c, but |
| gets the value from the stack rather than from the buffer where all the |
| registers were saved when the function called completed. */ |
| value_ptr |
| hppa_value_returned_from_stack (valtype , addr) |
| register struct type *valtype; |
| CORE_ADDR addr; |
| { |
| register value_ptr val; |
| |
| val = allocate_value (valtype); |
| CHECK_TYPEDEF (valtype); |
| target_read_memory(addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (valtype)); |
| |
| return val; |
| } |
| |
| |
| |
| /* elz: Used to lookup a symbol in the shared libraries. |
| This function calls shl_findsym, indirectly through a |
| call to __d_shl_get. __d_shl_get is in end.c, which is always |
| linked in by the hp compilers/linkers. |
| The call to shl_findsym cannot be made directly because it needs |
| to be active in target address space. |
| inputs: - minimal symbol pointer for the function we want to look up |
| - address in target space of the descriptor for the library |
| where we want to look the symbol up. |
| This address is retrieved using the |
| som_solib_get_solib_by_pc function (somsolib.c). |
| output: - real address in the library of the function. |
| note: the handle can be null, in which case shl_findsym will look for |
| the symbol in all the loaded shared libraries. |
| files to look at if you need reference on this stuff: |
| dld.c, dld_shl_findsym.c |
| end.c |
| man entry for shl_findsym */ |
| |
| CORE_ADDR |
| find_stub_with_shl_get(function, handle) |
| struct minimal_symbol *function; |
| CORE_ADDR handle; |
| { |
| struct symbol *get_sym, *symbol2; |
| struct minimal_symbol *buff_minsym, *msymbol; |
| struct type *ftype; |
| value_ptr *args; |
| value_ptr funcval, val; |
| |
| int x, namelen, err_value, tmp = -1; |
| CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr; |
| CORE_ADDR stub_addr; |
| |
| |
| args = (value_ptr *) alloca (sizeof (value_ptr) * 8); /* 6 for the arguments and one null one??? */ |
| funcval = find_function_in_inferior("__d_shl_get"); |
| get_sym = lookup_symbol("__d_shl_get", NULL, VAR_NAMESPACE, NULL, NULL); |
| buff_minsym = lookup_minimal_symbol("__buffer", NULL, NULL); |
| msymbol = lookup_minimal_symbol ("__shldp", NULL, NULL); |
| symbol2 = lookup_symbol("__shldp", NULL, VAR_NAMESPACE, NULL, NULL); |
| endo_buff_addr = SYMBOL_VALUE_ADDRESS (buff_minsym); |
| namelen = strlen(SYMBOL_NAME(function)); |
| value_return_addr = endo_buff_addr + namelen; |
| ftype = check_typedef(SYMBOL_TYPE(get_sym)); |
| |
| /* do alignment */ |
| if ((x=value_return_addr % 64) !=0) |
| value_return_addr = value_return_addr + 64 - x; |
| |
| errno_return_addr = value_return_addr + 64; |
| |
| |
| /* set up stuff needed by __d_shl_get in buffer in end.o */ |
| |
| target_write_memory(endo_buff_addr, SYMBOL_NAME(function), namelen); |
| |
| target_write_memory(value_return_addr, (char *) &tmp, 4); |
| |
| target_write_memory(errno_return_addr, (char *) &tmp, 4); |
| |
| target_write_memory(SYMBOL_VALUE_ADDRESS(msymbol), |
| (char *)&handle, 4); |
| |
| /* now prepare the arguments for the call */ |
| |
| args[0] = value_from_longest (TYPE_FIELD_TYPE(ftype, 0), 12); |
| args[1] = value_from_longest (TYPE_FIELD_TYPE(ftype, 1), SYMBOL_VALUE_ADDRESS(msymbol)); |
| args[2] = value_from_longest (TYPE_FIELD_TYPE(ftype, 2), endo_buff_addr); |
| args[3] = value_from_longest (TYPE_FIELD_TYPE(ftype, 3), TYPE_PROCEDURE); |
| args[4] = value_from_longest (TYPE_FIELD_TYPE(ftype, 4), value_return_addr); |
| args[5] = value_from_longest (TYPE_FIELD_TYPE(ftype, 5), errno_return_addr); |
| |
| /* now call the function */ |
| |
| val = call_function_by_hand(funcval, 6, args); |
| |
| /* now get the results */ |
| |
| target_read_memory(errno_return_addr, (char *) &err_value, sizeof(err_value)); |
| |
| target_read_memory(value_return_addr, (char *) &stub_addr, sizeof(stub_addr)); |
| if (stub_addr <= 0) |
| error("call to __d_shl_get failed, error code is %d", err_value); /* purecov: deadcode */ |
| |
| return(stub_addr); |
| } |
| |
| /* Cover routine for find_stub_with_shl_get to pass to catch_errors */ |
| static CORE_ADDR |
| cover_find_stub_with_shl_get (args) |
| args_for_find_stub * args; |
| { |
| return find_stub_with_shl_get (args->msym, args->solib_handle); |
| } |
| |
| |
| /* Insert the specified number of args and function address |
| into a call sequence of the above form stored at DUMMYNAME. |
| |
| On the hppa we need to call the stack dummy through $$dyncall. |
| Therefore our version of FIX_CALL_DUMMY takes an extra argument, |
| real_pc, which is the location where gdb should start up the |
| inferior to do the function call. |
| |
| This has to work across several versions of hpux, bsd, osf1. It has to |
| work regardless of what compiler was used to build the inferior program. |
| It should work regardless of whether or not end.o is available. It has |
| to work even if gdb can not call into the dynamic loader in the inferior |
| to query it for symbol names and addresses. |
| |
| Yes, all those cases should work. Luckily code exists to handle most |
| of them. The complexity is in selecting exactly what scheme should |
| be used to perform the inferior call. |
| |
| At the current time this routine is known not to handle cases where |
| the program was linked with HP's compiler without including end.o. |
| |
| Please contact Jeff Law (law@cygnus.com) before changing this code. */ |
| |
| CORE_ADDR |
| hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p) |
| char *dummy; |
| CORE_ADDR pc; |
| CORE_ADDR fun; |
| int nargs; |
| value_ptr *args; |
| struct type *type; |
| int gcc_p; |
| { |
| CORE_ADDR dyncall_addr; |
| struct minimal_symbol *msymbol; |
| struct minimal_symbol *trampoline; |
| int flags = read_register (FLAGS_REGNUM); |
| struct unwind_table_entry *u = NULL; |
| CORE_ADDR new_stub = 0; |
| CORE_ADDR solib_handle = 0; |
| |
| /* Nonzero if we will use GCC's PLT call routine. This routine must be |
| passed an import stub, not a PLABEL. It is also necessary to set %r19 |
| (the PIC register) before performing the call. |
| |
| If zero, then we are using __d_plt_call (HP's PLT call routine) or we |
| are calling the target directly. When using __d_plt_call we want to |
| use a PLABEL instead of an import stub. */ |
| int using_gcc_plt_call = 1; |
| |
| /* Prefer __gcc_plt_call over the HP supplied routine because |
| __gcc_plt_call works for any number of arguments. */ |
| trampoline = NULL; |
| if (lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL) == NULL) |
| using_gcc_plt_call = 0; |
| |
| msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| if (msymbol == NULL) |
| error ("Can't find an address for $$dyncall trampoline"); |
| |
| dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol); |
| |
| /* FUN could be a procedure label, in which case we have to get |
| its real address and the value of its GOT/DP if we plan to |
| call the routine via gcc_plt_call. */ |
| if ((fun & 0x2) && using_gcc_plt_call) |
| { |
| /* Get the GOT/DP value for the target function. It's |
| at *(fun+4). Note the call dummy is *NOT* allowed to |
| trash %r19 before calling the target function. */ |
| write_register (19, read_memory_integer ((fun & ~0x3) + 4, 4)); |
| |
| /* Now get the real address for the function we are calling, it's |
| at *fun. */ |
| fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, 4); |
| } |
| else |
| { |
| |
| #ifndef GDB_TARGET_IS_PA_ELF |
| /* FUN could be an export stub, the real address of a function, or |
| a PLABEL. When using gcc's PLT call routine we must call an import |
| stub rather than the export stub or real function for lazy binding |
| to work correctly |
| |
| /* If we are using the gcc PLT call routine, then we need to |
| get the import stub for the target function. */ |
| if (using_gcc_plt_call && som_solib_get_got_by_pc (fun)) |
| { |
| struct objfile *objfile; |
| struct minimal_symbol *funsymbol, *stub_symbol; |
| CORE_ADDR newfun = 0; |
| |
| funsymbol = lookup_minimal_symbol_by_pc (fun); |
| if (!funsymbol) |
| error ("Unable to find minimal symbol for target fucntion.\n"); |
| |
| /* Search all the object files for an import symbol with the |
| right name. */ |
| ALL_OBJFILES (objfile) |
| { |
| stub_symbol |
| = lookup_minimal_symbol_solib_trampoline |
| (SYMBOL_NAME (funsymbol), NULL, objfile); |
| |
| if (! stub_symbol) |
| stub_symbol = lookup_minimal_symbol (SYMBOL_NAME (funsymbol), |
| NULL, objfile); |
| |
| /* Found a symbol with the right name. */ |
| if (stub_symbol) |
| { |
| struct unwind_table_entry *u; |
| /* It must be a shared library trampoline. */ |
| if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline) |
| continue; |
| |
| /* It must also be an import stub. */ |
| u = find_unwind_entry (SYMBOL_VALUE (stub_symbol)); |
| if (!u |
| || (u->stub_unwind.stub_type != IMPORT) |
| && u->stub_unwind.stub_type != IMPORT_SHLIB) |
| continue; |
| |
| /* OK. Looks like the correct import stub. */ |
| newfun = SYMBOL_VALUE (stub_symbol); |
| fun = newfun; |
| } |
| } |
| |
| /* Ouch. We did not find an import stub. Make an attempt to |
| do the right thing instead of just croaking. Most of the |
| time this will actually work. */ |
| if (newfun == 0) |
| write_register (19, som_solib_get_got_by_pc (fun)); |
| |
| u = find_unwind_entry (fun); |
| if (u |
| && (u->stub_unwind.stub_type == IMPORT |
| || u->stub_unwind.stub_type == IMPORT_SHLIB)) |
| trampoline = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL); |
| |
| /* If we found the import stub in the shared library, then we have |
| to set %r19 before we call the stub. */ |
| if (u && u->stub_unwind.stub_type == IMPORT_SHLIB) |
| write_register (19, som_solib_get_got_by_pc (fun)); |
| } |
| #endif |
| } |
| |
| /* If we are calling into another load module then have sr4export call the |
| magic __d_plt_call routine which is linked in from end.o. |
| |
| You can't use _sr4export to make the call as the value in sp-24 will get |
| fried and you end up returning to the wrong location. You can't call the |
| target as the code to bind the PLT entry to a function can't return to a |
| stack address. |
| |
| Also, query the dynamic linker in the inferior to provide a suitable |
| PLABEL for the target function. */ |
| if (! using_gcc_plt_call) |
| { |
| CORE_ADDR new_fun; |
| |
| /* Get a handle for the shared library containing FUN. Given the |
| handle we can query the shared library for a PLABEL. */ |
| solib_handle = som_solib_get_solib_by_pc (fun); |
| |
| if (solib_handle) |
| { |
| struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc (fun); |
| |
| trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL); |
| |
| if (trampoline == NULL) |
| { |
| error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g or compiling with gcc."); |
| } |
| |
| /* This is where sr4export will jump to. */ |
| new_fun = SYMBOL_VALUE_ADDRESS (trampoline); |
| |
| /* If the function is in a shared library, then call __d_shl_get to |
| get a PLABEL for the target function. */ |
| new_stub = find_stub_with_shl_get (fmsymbol, solib_handle); |
| |
| if (new_stub == 0) |
| error ("Can't find an import stub for %s", SYMBOL_NAME (fmsymbol)); |
| |
| /* We have to store the address of the stub in __shlib_funcptr. */ |
| msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL, |
| (struct objfile *)NULL); |
| |
| if (msymbol == NULL) |
| error ("Can't find an address for __shlib_funcptr"); |
| target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), |
| (char *)&new_stub, 4); |
| |
| /* We want sr4export to call __d_plt_call, so we claim it is |
| the final target. Clear trampoline. */ |
| fun = new_fun; |
| trampoline = NULL; |
| } |
| } |
| |
| /* Store upper 21 bits of function address into ldil. fun will either be |
| the final target (most cases) or __d_plt_call when calling into a shared |
| library and __gcc_plt_call is not available. */ |
| store_unsigned_integer |
| (&dummy[FUNC_LDIL_OFFSET], |
| INSTRUCTION_SIZE, |
| deposit_21 (fun >> 11, |
| extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET], |
| INSTRUCTION_SIZE))); |
| |
| /* Store lower 11 bits of function address into ldo */ |
| store_unsigned_integer |
| (&dummy[FUNC_LDO_OFFSET], |
| INSTRUCTION_SIZE, |
| deposit_14 (fun & MASK_11, |
| extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET], |
| INSTRUCTION_SIZE))); |
| #ifdef SR4EXPORT_LDIL_OFFSET |
| |
| { |
| CORE_ADDR trampoline_addr; |
| |
| /* We may still need sr4export's address too. */ |
| |
| if (trampoline == NULL) |
| { |
| msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| if (msymbol == NULL) |
| error ("Can't find an address for _sr4export trampoline"); |
| |
| trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol); |
| } |
| else |
| trampoline_addr = SYMBOL_VALUE_ADDRESS (trampoline); |
| |
| |
| /* Store upper 21 bits of trampoline's address into ldil */ |
| store_unsigned_integer |
| (&dummy[SR4EXPORT_LDIL_OFFSET], |
| INSTRUCTION_SIZE, |
| deposit_21 (trampoline_addr >> 11, |
| extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET], |
| INSTRUCTION_SIZE))); |
| |
| /* Store lower 11 bits of trampoline's address into ldo */ |
| store_unsigned_integer |
| (&dummy[SR4EXPORT_LDO_OFFSET], |
| INSTRUCTION_SIZE, |
| deposit_14 (trampoline_addr & MASK_11, |
| extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET], |
| INSTRUCTION_SIZE))); |
| } |
| #endif |
| |
| write_register (22, pc); |
| |
| /* If we are in a syscall, then we should call the stack dummy |
| directly. $$dyncall is not needed as the kernel sets up the |
| space id registers properly based on the value in %r31. In |
| fact calling $$dyncall will not work because the value in %r22 |
| will be clobbered on the syscall exit path. |
| |
| Similarly if the current PC is in a shared library. Note however, |
| this scheme won't work if the shared library isn't mapped into |
| the same space as the stack. */ |
| if (flags & 2) |
| return pc; |
| #ifndef GDB_TARGET_IS_PA_ELF |
| else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid))) |
| return pc; |
| #endif |
| else |
| return dyncall_addr; |
| } |
| |
| |
| |
| |
| /* If the pid is in a syscall, then the FP register is not readable. |
| We'll return zero in that case, rather than attempting to read it |
| and cause a warning. */ |
| CORE_ADDR |
| target_read_fp (pid) |
| int pid; |
| { |
| int flags = read_register (FLAGS_REGNUM); |
| |
| if (flags & 2) { |
| return (CORE_ADDR) 0; |
| } |
| |
| /* This is the only site that may directly read_register () the FP |
| register. All others must use TARGET_READ_FP (). */ |
| return read_register (FP_REGNUM); |
| } |
| |
| |
| /* Get the PC from %r31 if currently in a syscall. Also mask out privilege |
| bits. */ |
| |
| CORE_ADDR |
| target_read_pc (pid) |
| int pid; |
| { |
| int flags = read_register_pid (FLAGS_REGNUM, pid); |
| |
| /* The following test does not belong here. It is OS-specific, and belongs |
| in native code. */ |
| /* Test SS_INSYSCALL */ |
| if (flags & 2) |
| return read_register_pid (31, pid) & ~0x3; |
| |
| return read_register_pid (PC_REGNUM, pid) & ~0x3; |
| } |
| |
| /* Write out the PC. If currently in a syscall, then also write the new |
| PC value into %r31. */ |
| |
| void |
| target_write_pc (v, pid) |
| CORE_ADDR v; |
| int pid; |
| { |
| int flags = read_register_pid (FLAGS_REGNUM, pid); |
| |
| /* The following test does not belong here. It is OS-specific, and belongs |
| in native code. */ |
| /* If in a syscall, then set %r31. Also make sure to get the |
| privilege bits set correctly. */ |
| /* Test SS_INSYSCALL */ |
| if (flags & 2) |
| write_register_pid (31, v | 0x3, pid); |
| |
| write_register_pid (PC_REGNUM, v, pid); |
| write_register_pid (NPC_REGNUM, v + 4, pid); |
| } |
| |
| /* return the alignment of a type in bytes. Structures have the maximum |
| alignment required by their fields. */ |
| |
| static int |
| hppa_alignof (type) |
| struct type *type; |
| { |
| int max_align, align, i; |
| CHECK_TYPEDEF (type); |
| switch (TYPE_CODE (type)) |
| { |
| case TYPE_CODE_PTR: |
| case TYPE_CODE_INT: |
| case TYPE_CODE_FLT: |
| return TYPE_LENGTH (type); |
| case TYPE_CODE_ARRAY: |
| return hppa_alignof (TYPE_FIELD_TYPE (type, 0)); |
| case TYPE_CODE_STRUCT: |
| case TYPE_CODE_UNION: |
| max_align = 1; |
| for (i = 0; i < TYPE_NFIELDS (type); i++) |
| { |
| /* Bit fields have no real alignment. */ |
| /* if (!TYPE_FIELD_BITPOS (type, i)) */ |
| if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */ |
| { |
| align = hppa_alignof (TYPE_FIELD_TYPE (type, i)); |
| max_align = max (max_align, align); |
| } |
| } |
| return max_align; |
| default: |
| return 4; |
| } |
| } |
| |
| /* Print the register regnum, or all registers if regnum is -1 */ |
| |
| void |
| pa_do_registers_info (regnum, fpregs) |
| int regnum; |
| int fpregs; |
| { |
| char raw_regs [REGISTER_BYTES]; |
| int i; |
| |
| /* Make a copy of gdb's save area (may cause actual |
| reads from the target). */ |
| for (i = 0; i < NUM_REGS; i++) |
| read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i)); |
| |
| if (regnum == -1) |
| pa_print_registers (raw_regs, regnum, fpregs); |
| else if (regnum < FP4_REGNUM) { |
| long reg_val[2]; |
| |
| /* Why is the value not passed through "extract_signed_integer" |
| as in "pa_print_registers" below? */ |
| pa_register_look_aside(raw_regs, regnum, ®_val[0]); |
| |
| if(!is_pa_2) { |
| printf_unfiltered ("%s %x\n", REGISTER_NAME (regnum), reg_val[1]); |
| } |
| else { |
| /* Fancy % formats to prevent leading zeros. */ |
| if(reg_val[0] == 0) |
| printf_unfiltered("%s %x\n", REGISTER_NAME (regnum), reg_val[1]); |
| else |
| printf_unfiltered("%s %x%8.8x\n", REGISTER_NAME (regnum), |
| reg_val[0], reg_val[1]); |
| } |
| } |
| else |
| /* Note that real floating point values only start at |
| FP4_REGNUM. FP0 and up are just status and error |
| registers, which have integral (bit) values. */ |
| pa_print_fp_reg (regnum); |
| } |
| |
| /********** new function ********************/ |
| void |
| pa_do_strcat_registers_info (regnum, fpregs, stream, precision) |
| int regnum; |
| int fpregs; |
| GDB_FILE *stream; |
| enum precision_type precision; |
| { |
| char raw_regs [REGISTER_BYTES]; |
| int i; |
| |
| /* Make a copy of gdb's save area (may cause actual |
| reads from the target). */ |
| for (i = 0; i < NUM_REGS; i++) |
| read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i)); |
| |
| if (regnum == -1) |
| pa_strcat_registers (raw_regs, regnum, fpregs, stream); |
| |
| else if (regnum < FP4_REGNUM) { |
| long reg_val[2]; |
| |
| /* Why is the value not passed through "extract_signed_integer" |
| as in "pa_print_registers" below? */ |
| pa_register_look_aside(raw_regs, regnum, ®_val[0]); |
| |
| if(!is_pa_2) { |
| fprintf_unfiltered (stream, "%s %x", REGISTER_NAME (regnum), reg_val[1]); |
| } |
| else { |
| /* Fancy % formats to prevent leading zeros. */ |
| if(reg_val[0] == 0) |
| fprintf_unfiltered(stream, "%s %x", REGISTER_NAME (regnum), |
| reg_val[1]); |
| else |
| fprintf_unfiltered(stream, "%s %x%8.8x", REGISTER_NAME (regnum), |
| reg_val[0], reg_val[1]); |
| } |
| } |
| else |
| /* Note that real floating point values only start at |
| FP4_REGNUM. FP0 and up are just status and error |
| registers, which have integral (bit) values. */ |
| pa_strcat_fp_reg (regnum, stream, precision); |
| } |
| |
| /* If this is a PA2.0 machine, fetch the real 64-bit register |
| value. Otherwise use the info from gdb's saved register area. |
| |
| Note that reg_val is really expected to be an array of longs, |
| with two elements. */ |
| static void |
| pa_register_look_aside(raw_regs, regnum, raw_val) |
| char *raw_regs; |
| int regnum; |
| long *raw_val; |
| { |
| static int know_which = 0; /* False */ |
| |
| int regaddr; |
| unsigned int offset; |
| register int i; |
| int start; |
| |
| |
| char buf[MAX_REGISTER_RAW_SIZE]; |
| long long reg_val; |
| |
| if(!know_which) { |
| if(CPU_PA_RISC2_0 == sysconf(_SC_CPU_VERSION)) { |
| is_pa_2 = (1==1); |
| } |
| |
| know_which = 1; /* True */ |
| } |
| |
| raw_val[0] = 0; |
| raw_val[1] = 0; |
| |
| if(!is_pa_2) { |
| raw_val[1] = *(long *)(raw_regs + REGISTER_BYTE(regnum)); |
| return; |
| } |
| |
| /* Code below copied from hppah-nat.c, with fixes for wide |
| registers, using different area of save_state, etc. */ |
| if (regnum == FLAGS_REGNUM || regnum >= FP0_REGNUM || |
| !HAVE_STRUCT_SAVE_STATE_T || !HAVE_STRUCT_MEMBER_SS_WIDE) { |
| /* Use narrow regs area of save_state and default macro. */ |
| offset = U_REGS_OFFSET; |
| regaddr = register_addr(regnum, offset); |
| start = 1; |
| } |
| else { |
| /* Use wide regs area, and calculate registers as 8 bytes wide. |
| |
| We'd like to do this, but current version of "C" doesn't |
| permit "offsetof": |
| |
| offset = offsetof(save_state_t, ss_wide); |
| |
| Note that to avoid "C" doing typed pointer arithmetic, we |
| have to cast away the type in our offset calculation: |
| otherwise we get an offset of 1! */ |
| |
| /* NB: save_state_t is not available before HPUX 9. |
| The ss_wide field is not available previous to HPUX 10.20, |
| so to avoid compile-time warnings, we only compile this for |
| PA 2.0 processors. This control path should only be followed |
| if we're debugging a PA 2.0 processor, so this should not cause |
| problems. */ |
| |
| /* #if the following code out so that this file can still be |
| compiled on older HPUX boxes (< 10.20) which don't have |
| this structure/structure member. */ |
| #if HAVE_STRUCT_SAVE_STATE_T == 1 && HAVE_STRUCT_MEMBER_SS_WIDE == 1 |
| save_state_t temp; |
| |
| offset = ((int) &temp.ss_wide) - ((int) &temp); |
| regaddr = offset + regnum * 8; |
| start = 0; |
| #endif |
| } |
| |
| for(i = start; i < 2; i++) |
| { |
| errno = 0; |
| raw_val[i] = call_ptrace (PT_RUREGS, inferior_pid, |
| (PTRACE_ARG3_TYPE) regaddr, 0); |
| if (errno != 0) |
| { |
| /* Warning, not error, in case we are attached; sometimes the |
| kernel doesn't let us at the registers. */ |
| char *err = safe_strerror (errno); |
| char *msg = alloca (strlen (err) + 128); |
| sprintf (msg, "reading register %s: %s", REGISTER_NAME (regnum), err); |
| warning (msg); |
| goto error_exit; |
| } |
| |
| regaddr += sizeof (long); |
| } |
| |
| if (regnum == PCOQ_HEAD_REGNUM || regnum == PCOQ_TAIL_REGNUM) |
| raw_val[1] &= ~0x3; /* I think we're masking out space bits */ |
| |
| error_exit: |
| ; |
| } |
| |
| /* "Info all-reg" command */ |
| |
| static void |
| pa_print_registers (raw_regs, regnum, fpregs) |
| char *raw_regs; |
| int regnum; |
| int fpregs; |
| { |
| int i,j; |
| long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */ |
| long long_val; |
| |
| for (i = 0; i < 18; i++) |
| { |
| for (j = 0; j < 4; j++) |
| { |
| /* Q: Why is the value passed through "extract_signed_integer", |
| while above, in "pa_do_registers_info" it isn't? |
| A: ? */ |
| pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]); |
| |
| /* Even fancier % formats to prevent leading zeros |
| and still maintain the output in columns. */ |
| if(!is_pa_2) { |
| /* Being big-endian, on this machine the low bits |
| (the ones we want to look at) are in the second longword. */ |
| long_val = extract_signed_integer (&raw_val[1], 4); |
| printf_filtered ("%8.8s: %8x ", |
| REGISTER_NAME (i+(j*18)), long_val); |
| } |
| else { |
| /* raw_val = extract_signed_integer(&raw_val, 8); */ |
| if(raw_val[0] == 0) |
| printf_filtered("%8.8s: %8x ", |
| REGISTER_NAME (i+(j*18)), raw_val[1]); |
| else |
| printf_filtered("%8.8s: %8x%8.8x ", REGISTER_NAME (i+(j*18)), |
| raw_val[0], raw_val[1]); |
| } |
| } |
| printf_unfiltered ("\n"); |
| } |
| |
| if (fpregs) |
| for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */ |
| pa_print_fp_reg (i); |
| } |
| |
| /************* new function ******************/ |
| static void |
| pa_strcat_registers (raw_regs, regnum, fpregs, stream) |
| char *raw_regs; |
| int regnum; |
| int fpregs; |
| GDB_FILE *stream; |
| { |
| int i,j; |
| long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */ |
| long long_val; |
| enum precision_type precision; |
| |
| precision = unspecified_precision; |
| |
| for (i = 0; i < 18; i++) |
| { |
| for (j = 0; j < 4; j++) |
| { |
| /* Q: Why is the value passed through "extract_signed_integer", |
| while above, in "pa_do_registers_info" it isn't? |
| A: ? */ |
| pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]); |
| |
| /* Even fancier % formats to prevent leading zeros |
| and still maintain the output in columns. */ |
| if(!is_pa_2) { |
| /* Being big-endian, on this machine the low bits |
| (the ones we want to look at) are in the second longword. */ |
| long_val = extract_signed_integer(&raw_val[1], 4); |
| fprintf_filtered (stream, "%8.8s: %8x ", REGISTER_NAME (i+(j*18)), long_val); |
| } |
| else { |
| /* raw_val = extract_signed_integer(&raw_val, 8); */ |
| if(raw_val[0] == 0) |
| fprintf_filtered(stream, "%8.8s: %8x ", REGISTER_NAME (i+(j*18)), |
| raw_val[1]); |
| else |
| fprintf_filtered(stream, "%8.8s: %8x%8.8x ", REGISTER_NAME (i+(j*18)), |
| raw_val[0], raw_val[1]); |
| } |
| } |
| fprintf_unfiltered (stream, "\n"); |
| } |
| |
| if (fpregs) |
| for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */ |
| pa_strcat_fp_reg (i, stream, precision); |
| } |
| |
| static void |
| pa_print_fp_reg (i) |
| int i; |
| { |
| char raw_buffer[MAX_REGISTER_RAW_SIZE]; |
| char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE]; |
| |
| /* Get 32bits of data. */ |
| read_relative_register_raw_bytes (i, raw_buffer); |
| |
| /* Put it in the buffer. No conversions are ever necessary. */ |
| memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i)); |
| |
| fputs_filtered (REGISTER_NAME (i), gdb_stdout); |
| print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout); |
| fputs_filtered ("(single precision) ", gdb_stdout); |
| |
| val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0, |
| 1, 0, Val_pretty_default); |
| printf_filtered ("\n"); |
| |
| /* If "i" is even, then this register can also be a double-precision |
| FP register. Dump it out as such. */ |
| if ((i % 2) == 0) |
| { |
| /* Get the data in raw format for the 2nd half. */ |
| read_relative_register_raw_bytes (i + 1, raw_buffer); |
| |
| /* Copy it into the appropriate part of the virtual buffer. */ |
| memcpy (virtual_buffer + REGISTER_RAW_SIZE (i), raw_buffer, |
| REGISTER_RAW_SIZE (i)); |
| |
| /* Dump it as a double. */ |
| fputs_filtered (REGISTER_NAME (i), gdb_stdout); |
| print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout); |
| fputs_filtered ("(double precision) ", gdb_stdout); |
| |
| val_print (builtin_type_double, virtual_buffer, 0, 0, gdb_stdout, 0, |
| 1, 0, Val_pretty_default); |
| printf_filtered ("\n"); |
| } |
| } |
| |
| /*************** new function ***********************/ |
| static void |
| pa_strcat_fp_reg (i, stream, precision) |
| int i; |
| GDB_FILE *stream; |
| enum precision_type precision; |
| { |
| char raw_buffer[MAX_REGISTER_RAW_SIZE]; |
| char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE]; |
| |
| fputs_filtered (REGISTER_NAME (i), stream); |
| print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), stream); |
| |
| /* Get 32bits of data. */ |
| read_relative_register_raw_bytes (i, raw_buffer); |
| |
| /* Put it in the buffer. No conversions are ever necessary. */ |
| memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i)); |
| |
| if (precision == double_precision && (i % 2) == 0) |
| { |
| |
| char raw_buf[MAX_REGISTER_RAW_SIZE]; |
| |
| /* Get the data in raw format for the 2nd half. */ |
| read_relative_register_raw_bytes (i + 1, raw_buf); |
| |
| /* Copy it into the appropriate part of the virtual buffer. */ |
| memcpy (virtual_buffer + REGISTER_RAW_SIZE(i), raw_buf, REGISTER_RAW_SIZE (i)); |
| |
| val_print (builtin_type_double, virtual_buffer, 0, 0 , stream, 0, |
| 1, 0, Val_pretty_default); |
| |
| } |
| else { |
| val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, stream, 0, |
| 1, 0, Val_pretty_default); |
| } |
| |
| } |
| |
| /* Return one if PC is in the call path of a trampoline, else return zero. |
| |
| Note we return one for *any* call trampoline (long-call, arg-reloc), not |
| just shared library trampolines (import, export). */ |
| |
| int |
| in_solib_call_trampoline (pc, name) |
| CORE_ADDR pc; |
| char *name; |
| { |
| struct minimal_symbol *minsym; |
| struct unwind_table_entry *u; |
| static CORE_ADDR dyncall = 0; |
| static CORE_ADDR sr4export = 0; |
| |
| /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a |
| new exec file */ |
| |
| /* First see if PC is in one of the two C-library trampolines. */ |
| if (!dyncall) |
| { |
| minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| if (minsym) |
| dyncall = SYMBOL_VALUE_ADDRESS (minsym); |
| else |
| dyncall = -1; |
| } |
| |
| if (!sr4export) |
| { |
| minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| if (minsym) |
| sr4export = SYMBOL_VALUE_ADDRESS (minsym); |
| else |
| sr4export = -1; |
| } |
| |
| if (pc == dyncall || pc == sr4export) |
| return 1; |
| |
| /* Get the unwind descriptor corresponding to PC, return zero |
| if no unwind was found. */ |
| u = find_unwind_entry (pc); |
| if (!u) |
| return 0; |
| |
| /* If this isn't a linker stub, then return now. */ |
| if (u->stub_unwind.stub_type == 0) |
| return 0; |
| |
| /* By definition a long-branch stub is a call stub. */ |
| if (u->stub_unwind.stub_type == LONG_BRANCH) |
| return 1; |
| |
| /* The call and return path execute the same instructions within |
| an IMPORT stub! So an IMPORT stub is both a call and return |
| trampoline. */ |
| if (u->stub_unwind.stub_type == IMPORT) |
| return 1; |
| |
| /* Parameter relocation stubs always have a call path and may have a |
| return path. */ |
| if (u->stub_unwind.stub_type == PARAMETER_RELOCATION |
| || u->stub_unwind.stub_type == EXPORT) |
| { |
| CORE_ADDR addr; |
| |
| /* Search forward from the current PC until we hit a branch |
| or the end of the stub. */ |
| for (addr = pc; addr <= u->region_end; addr += 4) |
| { |
| unsigned long insn; |
| |
| insn = read_memory_integer (addr, 4); |
| |
| /* Does it look like a bl? If so then it's the call path, if |
| we find a bv or be first, then we're on the return path. */ |
| if ((insn & 0xfc00e000) == 0xe8000000) |
| return 1; |
| else if ((insn & 0xfc00e001) == 0xe800c000 |
| || (insn & 0xfc000000) == 0xe0000000) |
| return 0; |
| } |
| |
| /* Should never happen. */ |
| warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */ |
| return 0; /* purecov: deadcode */ |
| } |
| |
| /* Unknown stub type. For now, just return zero. */ |
| return 0; /* purecov: deadcode */ |
| } |
| |
| /* Return one if PC is in the return path of a trampoline, else return zero. |
| |
| Note we return one for *any* call trampoline (long-call, arg-reloc), not |
| just shared library trampolines (import, export). */ |
| |
| int |
| in_solib_return_trampoline (pc, name) |
| CORE_ADDR pc; |
| char *name; |
| { |
| struct unwind_table_entry *u; |
| |
| /* Get the unwind descriptor corresponding to PC, return zero |
| if no unwind was found. */ |
| u = find_unwind_entry (pc); |
| if (!u) |
| return 0; |
| |
| /* If this isn't a linker stub or it's just a long branch stub, then |
| return zero. */ |
| if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH) |
| return 0; |
| |
| /* The call and return path execute the same instructions within |
| an IMPORT stub! So an IMPORT stub is both a call and return |
| trampoline. */ |
| if (u->stub_unwind.stub_type == IMPORT) |
| return 1; |
| |
| /* Parameter relocation stubs always have a call path and may have a |
| return path. */ |
| if (u->stub_unwind.stub_type == PARAMETER_RELOCATION |
| || u->stub_unwind.stub_type == EXPORT) |
| { |
| CORE_ADDR addr; |
| |
| /* Search forward from the current PC until we hit a branch |
| or the end of the stub. */ |
| for (addr = pc; addr <= u->region_end; addr += 4) |
| { |
| unsigned long insn; |
| |
| insn = read_memory_integer (addr, 4); |
| |
| /* Does it look like a bl? If so then it's the call path, if |
| we find a bv or be first, then we're on the return path. */ |
| if ((insn & 0xfc00e000) == 0xe8000000) |
| return 0; |
| else if ((insn & 0xfc00e001) == 0xe800c000 |
| || (insn & 0xfc000000) == 0xe0000000) |
| return 1; |
| } |
| |
| /* Should never happen. */ |
| warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */ |
| return 0; /* purecov: deadcode */ |
| } |
| |
| /* Unknown stub type. For now, just return zero. */ |
| return 0; /* purecov: deadcode */ |
| |
| } |
| |
| /* Figure out if PC is in a trampoline, and if so find out where |
| the trampoline will jump to. If not in a trampoline, return zero. |
| |
| Simple code examination probably is not a good idea since the code |
| sequences in trampolines can also appear in user code. |
| |
| We use unwinds and information from the minimal symbol table to |
| determine when we're in a trampoline. This won't work for ELF |
| (yet) since it doesn't create stub unwind entries. Whether or |
| not ELF will create stub unwinds or normal unwinds for linker |
| stubs is still being debated. |
| |
| This should handle simple calls through dyncall or sr4export, |
| long calls, argument relocation stubs, and dyncall/sr4export |
| calling an argument relocation stub. It even handles some stubs |
| used in dynamic executables. */ |
| |
| # if 0 |
| CORE_ADDR |
| skip_trampoline_code (pc, name) |
| CORE_ADDR pc; |
| char *name; |
| { |
| return find_solib_trampoline_target(pc); |
| } |
| |
| #endif |
| |
| CORE_ADDR |
| skip_trampoline_code (pc, name) |
| CORE_ADDR pc; |
| char *name; |
| { |
| long orig_pc = pc; |
| long prev_inst, curr_inst, loc; |
| static CORE_ADDR dyncall = 0; |
| static CORE_ADDR dyncall_external = 0; |
| static CORE_ADDR sr4export = 0; |
| struct minimal_symbol *msym; |
| struct unwind_table_entry *u; |
| |
| |
| /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a |
| new exec file */ |
| |
| if (!dyncall) |
| { |
| msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| if (msym) |
| dyncall = SYMBOL_VALUE_ADDRESS (msym); |
| else |
| dyncall = -1; |
| } |
| |
| if (!dyncall_external) |
| { |
| msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL); |
| if (msym) |
| dyncall_external = SYMBOL_VALUE_ADDRESS (msym); |
| else |
| dyncall_external = -1; |
| } |
| |
| if (!sr4export) |
| { |
| msym = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| if (msym) |
| sr4export = SYMBOL_VALUE_ADDRESS (msym); |
| else |
| sr4export = -1; |
| } |
| |
| /* Addresses passed to dyncall may *NOT* be the actual address |
| of the function. So we may have to do something special. */ |
| if (pc == dyncall) |
| { |
| pc = (CORE_ADDR) read_register (22); |
| |
| /* If bit 30 (counting from the left) is on, then pc is the address of |
| the PLT entry for this function, not the address of the function |
| itself. Bit 31 has meaning too, but only for MPE. */ |
| if (pc & 0x2) |
| pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4); |
| } |
| if (pc == dyncall_external) |
| { |
| pc = (CORE_ADDR) read_register (22); |
| pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4); |
| } |
| else if (pc == sr4export) |
| pc = (CORE_ADDR) (read_register (22)); |
| |
| /* Get the unwind descriptor corresponding to PC, return zero |
| if no unwind was found. */ |
| u = find_unwind_entry (pc); |
| if (!u) |
| return 0; |
| |
| /* If this isn't a linker stub, then return now. */ |
| /* elz: attention here! (FIXME) because of a compiler/linker |
| error, some stubs which should have a non zero stub_unwind.stub_type |
| have unfortunately a value of zero. So this function would return here |
| as if we were not in a trampoline. To fix this, we go look at the partial |
| symbol information, which reports this guy as a stub. |
| (FIXME): Unfortunately, we are not that lucky: it turns out that the |
| partial symbol information is also wrong sometimes. This is because |
| when it is entered (somread.c::som_symtab_read()) it can happen that |
| if the type of the symbol (from the som) is Entry, and the symbol is |
| in a shared library, then it can also be a trampoline. This would |
| be OK, except that I believe the way they decide if we are ina shared library |
| does not work. SOOOO..., even if we have a regular function w/o trampolines |
| its minimal symbol can be assigned type mst_solib_trampoline. |
| Also, if we find that the symbol is a real stub, then we fix the unwind |
| descriptor, and define the stub type to be EXPORT. |
| Hopefully this is correct most of the times. */ |
| if (u->stub_unwind.stub_type == 0) |
| { |
| |
| /* elz: NOTE (FIXME!) once the problem with the unwind information is fixed |
| we can delete all the code which appears between the lines */ |
| /*--------------------------------------------------------------------------*/ |
| msym = lookup_minimal_symbol_by_pc (pc); |
| |
| if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline) |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| |
| else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline) |
| { |
| struct objfile *objfile; |
| struct minimal_symbol *msymbol; |
| int function_found = 0; |
| |
| /* go look if there is another minimal symbol with the same name as |
| this one, but with type mst_text. This would happen if the msym |
| is an actual trampoline, in which case there would be another |
| symbol with the same name corresponding to the real function */ |
| |
| ALL_MSYMBOLS (objfile, msymbol) |
| { |
| if (MSYMBOL_TYPE (msymbol) == mst_text |
| && STREQ (SYMBOL_NAME (msymbol) , SYMBOL_NAME (msym))) |
| { |
| function_found = 1; |
| break; |
| } |
| } |
| |
| if (function_found) |
| /* the type of msym is correct (mst_solib_trampoline), but |
| the unwind info is wrong, so set it to the correct value */ |
| u->stub_unwind.stub_type = EXPORT; |
| else |
| /* the stub type info in the unwind is correct (this is not a |
| trampoline), but the msym type information is wrong, it |
| should be mst_text. So we need to fix the msym, and also |
| get out of this function */ |
| { |
| MSYMBOL_TYPE (msym) = mst_text; |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| } |
| |
| /* It's a stub. Search for a branch and figure out where it goes. |
| Note we have to handle multi insn branch sequences like ldil;ble. |
| Most (all?) other branches can be determined by examining the contents |
| of certain registers and the stack. */ |
| |
| loc = pc; |
| curr_inst = 0; |
| prev_inst = 0; |
| while (1) |
| { |
| /* Make sure we haven't walked outside the range of this stub. */ |
| if (u != find_unwind_entry (loc)) |
| { |
| warning ("Unable to find branch in linker stub"); |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| |
| prev_inst = curr_inst; |
| curr_inst = read_memory_integer (loc, 4); |
| |
| /* Does it look like a branch external using %r1? Then it's the |
| branch from the stub to the actual function. */ |
| if ((curr_inst & 0xffe0e000) == 0xe0202000) |
| { |
| /* Yup. See if the previous instruction loaded |
| a value into %r1. If so compute and return the jump address. */ |
| if ((prev_inst & 0xffe00000) == 0x20200000) |
| return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3; |
| else |
| { |
| warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1)."); |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| } |
| |
| /* Does it look like a be 0(sr0,%r21)? OR |
| Does it look like a be, n 0(sr0,%r21)? OR |
| Does it look like a bve (r21)? (this is on PA2.0) |
| Does it look like a bve, n(r21)? (this is also on PA2.0) |
| That's the branch from an |
| import stub to an export stub. |
| |
| It is impossible to determine the target of the branch via |
| simple examination of instructions and/or data (consider |
| that the address in the plabel may be the address of the |
| bind-on-reference routine in the dynamic loader). |
| |
| So we have try an alternative approach. |
| |
| Get the name of the symbol at our current location; it should |
| be a stub symbol with the same name as the symbol in the |
| shared library. |
| |
| Then lookup a minimal symbol with the same name; we should |
| get the minimal symbol for the target routine in the shared |
| library as those take precedence of import/export stubs. */ |
| if ((curr_inst == 0xe2a00000) || |
| (curr_inst == 0xe2a00002) || |
| (curr_inst == 0xeaa0d000) || |
| (curr_inst == 0xeaa0d002)) |
| { |
| struct minimal_symbol *stubsym, *libsym; |
| |
| stubsym = lookup_minimal_symbol_by_pc (loc); |
| if (stubsym == NULL) |
| { |
| warning ("Unable to find symbol for 0x%x", loc); |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| |
| libsym = lookup_minimal_symbol (SYMBOL_NAME (stubsym), NULL, NULL); |
| if (libsym == NULL) |
| { |
| warning ("Unable to find library symbol for %s\n", |
| SYMBOL_NAME (stubsym)); |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| |
| return SYMBOL_VALUE (libsym); |
| } |
| |
| /* Does it look like bl X,%rp or bl X,%r0? Another way to do a |
| branch from the stub to the actual function. */ |
| /*elz*/ |
| else if ((curr_inst & 0xffe0e000) == 0xe8400000 |
| || (curr_inst & 0xffe0e000) == 0xe8000000 |
| || (curr_inst & 0xffe0e000) == 0xe800A000) |
| return (loc + extract_17 (curr_inst) + 8) & ~0x3; |
| |
| /* Does it look like bv (rp)? Note this depends on the |
| current stack pointer being the same as the stack |
| pointer in the stub itself! This is a branch on from the |
| stub back to the original caller. */ |
| /*else if ((curr_inst & 0xffe0e000) == 0xe840c000)*/ |
| else if ((curr_inst & 0xffe0f000) == 0xe840c000) |
| { |
| /* Yup. See if the previous instruction loaded |
| rp from sp - 8. */ |
| if (prev_inst == 0x4bc23ff1) |
| return (read_memory_integer |
| (read_register (SP_REGNUM) - 8, 4)) & ~0x3; |
| else |
| { |
| warning ("Unable to find restore of %%rp before bv (%%rp)."); |
| return orig_pc == pc ? 0 : pc & ~0x3; |
| } |
| } |
| |
| /* elz: added this case to capture the new instruction |
| at the end of the return part of an export stub used by |
| the PA2.0: BVE, n (rp) */ |
| else if ((curr_inst & 0xffe0f000) == 0xe840d000) |
| { |
| return (read_memory_integer |
| (read_register (SP_REGNUM) - 24, 4)) & ~0x3; |
| } |
| |
| /* What about be,n 0(sr0,%rp)? It's just another way we return to |
| the original caller from the stub. Used in dynamic executables. */ |
| else if (curr_inst == 0xe0400002) |
| { |
| /* The value we jump to is sitting in sp - 24. But that's |
| loaded several instructions before the be instruction. |
| I guess we could check for the previous instruction being |
| mtsp %r1,%sr0 if we want to do sanity checking. */ |
| return (read_memory_integer |
| (read_register (SP_REGNUM) - 24, 4)) & ~0x3; |
| } |
| |
| /* Haven't found the branch yet, but we're still in the stub. |
| Keep looking. */ |
| loc += 4; |
| } |
| } |
| |
| |
| /* For the given instruction (INST), return any adjustment it makes |
| to the stack pointer or zero for no adjustment. |
| |
| This only handles instructions commonly found in prologues. */ |
| |
| static int |
| prologue_inst_adjust_sp (inst) |
| unsigned long inst; |
| { |
| /* This must persist across calls. */ |
| static int save_high21; |
| |
| /* The most common way to perform a stack adjustment ldo X(sp),sp */ |
| if ((inst & 0xffffc000) == 0x37de0000) |
| return extract_14 (inst); |
| |
| /* stwm X,D(sp) */ |
| if ((inst & 0xffe00000) == 0x6fc00000) |
| return extract_14 (inst); |
| |
| /* addil high21,%r1; ldo low11,(%r1),%r30) |
| save high bits in save_high21 for later use. */ |
| if ((inst & 0xffe00000) == 0x28200000) |
| { |
| save_high21 = extract_21 (inst); |
| return 0; |
| } |
| |
| if ((inst & 0xffff0000) == 0x343e0000) |
| return save_high21 + extract_14 (inst); |
| |
| /* fstws as used by the HP compilers. */ |
| if ((inst & 0xffffffe0) == 0x2fd01220) |
| return extract_5_load (inst); |
| |
| /* No adjustment. */ |
| return 0; |
| } |
| |
| /* Return nonzero if INST is a branch of some kind, else return zero. */ |
| |
| static int |
| is_branch (inst) |
| unsigned long inst; |
| { |
| switch (inst >> 26) |
| { |
| case 0x20: |
| case 0x21: |
| case 0x22: |
| case 0x23: |
| case 0x28: |
| case 0x29: |
| case 0x2a: |
| case 0x2b: |
| case 0x30: |
| case 0x31: |
| case 0x32: |
| case 0x33: |
| case 0x38: |
| case 0x39: |
| case 0x3a: |
| return 1; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| /* Return the register number for a GR which is saved by INST or |
| zero it INST does not save a GR. */ |
| |
| static int |
| inst_saves_gr (inst) |
| unsigned long inst; |
| { |
| /* Does it look like a stw? */ |
| if ((inst >> 26) == 0x1a) |
| return extract_5R_store (inst); |
| |
| /* Does it look like a stwm? GCC & HPC may use this in prologues. */ |
| if ((inst >> 26) == 0x1b) |
| return extract_5R_store (inst); |
| |
| /* Does it look like sth or stb? HPC versions 9.0 and later use these |
| too. */ |
| if ((inst >> 26) == 0x19 || (inst >> 26) == 0x18) |
| return extract_5R_store (inst); |
| |
| return 0; |
| } |
| |
| /* Return the register number for a FR which is saved by INST or |
| zero it INST does not save a FR. |
| |
| Note we only care about full 64bit register stores (that's the only |
| kind of stores the prologue will use). |
| |
| FIXME: What about argument stores with the HP compiler in ANSI mode? */ |
| |
| static int |
| inst_saves_fr (inst) |
| unsigned long inst; |
| { |
| /* is this an FSTDS ?*/ |
| if ((inst & 0xfc00dfc0) == 0x2c001200) |
| return extract_5r_store (inst); |
| /* is this an FSTWS ?*/ |
| if ((inst & 0xfc00df80) == 0x24001200) |
| return extract_5r_store (inst); |
| return 0; |
| } |
| |
| /* Advance PC across any function entry prologue instructions |
| to reach some "real" code. |
| |
| Use information in the unwind table to determine what exactly should |
| be in the prologue. */ |
| |
| |
| CORE_ADDR |
| skip_prologue_hard_way (pc) |
| CORE_ADDR pc; |
| { |
| char buf[4]; |
| CORE_ADDR orig_pc = pc; |
| unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp; |
| unsigned long args_stored, status, i, restart_gr, restart_fr; |
| struct unwind_table_entry *u; |
| |
| restart_gr = 0; |
| restart_fr = 0; |
| |
| restart: |
| u = find_unwind_entry (pc); |
| if (!u) |
| return pc; |
| |
| /* If we are not at the beginning of a function, then return now. */ |
| if ((pc & ~0x3) != u->region_start) |
| return pc; |
| |
| /* This is how much of a frame adjustment we need to account for. */ |
| stack_remaining = u->Total_frame_size << 3; |
| |
| /* Magic register saves we want to know about. */ |
| save_rp = u->Save_RP; |
| save_sp = u->Save_SP; |
| |
| /* An indication that args may be stored into the stack. Unfortunately |
| the HPUX compilers tend to set this in cases where no args were |
| stored too!. */ |
| args_stored = 1; |
| |
| /* Turn the Entry_GR field into a bitmask. */ |
| save_gr = 0; |
| for (i = 3; i < u->Entry_GR + 3; i++) |
| { |
| /* Frame pointer gets saved into a special location. */ |
| if (u->Save_SP && i == FP_REGNUM) |
| continue; |
| |
| save_gr |= (1 << i); |
| } |
| save_gr &= ~restart_gr; |
| |
| /* Turn the Entry_FR field into a bitmask too. */ |
| save_fr = 0; |
| for (i = 12; i < u->Entry_FR + 12; i++) |
| save_fr |= (1 << i); |
| save_fr &= ~restart_fr; |
| |
| /* Loop until we find everything of interest or hit a branch. |
| |
| For unoptimized GCC code and for any HP CC code this will never ever |
| examine any user instructions. |
| |
| For optimzied GCC code we're faced with problems. GCC will schedule |
| its prologue and make prologue instructions available for delay slot |
| filling. The end result is user code gets mixed in with the prologue |
| and a prologue instruction may be in the delay slot of the first branch |
| or call. |
| |
| Some unexpected things are expected with debugging optimized code, so |
| we allow this routine to walk past user instructions in optimized |
| GCC code. */ |
| while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0 |
| || args_stored) |
| { |
| unsigned int reg_num; |
| unsigned long old_stack_remaining, old_save_gr, old_save_fr; |
| unsigned long old_save_rp, old_save_sp, next_inst; |
| |
| /* Save copies of all the triggers so we can compare them later |
| (only for HPC). */ |
| old_save_gr = save_gr; |
| old_save_fr = save_fr; |
| old_save_rp = save_rp; |
| old_save_sp = save_sp; |
| old_stack_remaining = stack_remaining; |
| |
| status = target_read_memory (pc, buf, 4); |
| inst = extract_unsigned_integer (buf, 4); |
| |
| /* Yow! */ |
| if (status != 0) |
| return pc; |
| |
| /* Note the interesting effects of this instruction. */ |
| stack_remaining -= prologue_inst_adjust_sp (inst); |
| |
| /* There is only one instruction used for saving RP into the stack. */ |
| if (inst == 0x6bc23fd9) |
| save_rp = 0; |
| |
| /* This is the only way we save SP into the stack. At this time |
| the HP compilers never bother to save SP into the stack. */ |
| if ((inst & 0xffffc000) == 0x6fc10000) |
| save_sp = 0; |
| |
| /* Account for general and floating-point register saves. */ |
| reg_num = inst_saves_gr (inst); |
| save_gr &= ~(1 << reg_num); |
| |
| /* Ugh. Also account for argument stores into the stack. |
| Unfortunately args_stored only tells us that some arguments |
| where stored into the stack. Not how many or what kind! |
| |
| This is a kludge as on the HP compiler sets this bit and it |
| never does prologue scheduling. So once we see one, skip past |
| all of them. We have similar code for the fp arg stores below. |
| |
| FIXME. Can still die if we have a mix of GR and FR argument |
| stores! */ |
| if (reg_num >= 23 && reg_num <= 26) |
| { |
| while (reg_num >= 23 && reg_num <= 26) |
| { |
| pc += 4; |
| status = target_read_memory (pc, buf, 4); |
| inst = extract_unsigned_integer (buf, 4); |
| if (status != 0) |
| return pc; |
| reg_num = inst_saves_gr (inst); |
| } |
| args_stored = 0; |
| continue; |
| } |
| |
| reg_num = inst_saves_fr (inst); |
| save_fr &= ~(1 << reg_num); |
| |
| status = target_read_memory (pc + 4, buf, 4); |
| next_inst = extract_unsigned_integer (buf, 4); |
| |
| /* Yow! */ |
| if (status != 0) |
| return pc; |
| |
| /* We've got to be read to handle the ldo before the fp register |
| save. */ |
| if ((inst & 0xfc000000) == 0x34000000 |
| && inst_saves_fr (next_inst) >= 4 |
| && inst_saves_fr (next_inst) <= 7) |
| { |
| /* So we drop into the code below in a reasonable state. */ |
| reg_num = inst_saves_fr (next_inst); |
| pc -= 4; |
| } |
| |
| /* Ugh. Also account for argument stores into the stack. |
| This is a kludge as on the HP compiler sets this bit and it |
| never does prologue scheduling. So once we see one, skip past |
| all of them. */ |
| if (reg_num >= 4 && reg_num <= 7) |
| { |
| while (reg_num >= 4 && reg_num <= 7) |
| { |
| pc += 8; |
| status = target_read_memory (pc, buf, 4); |
| inst = extract_unsigned_integer (buf, 4); |
| if (status != 0) |
| return pc; |
| if ((inst & 0xfc000000) != 0x34000000) |
| break; |
| status = target_read_memory (pc + 4, buf, 4); |
| next_inst = extract_unsigned_integer (buf, 4); |
| if (status != 0) |
| return pc; |
| reg_num = inst_saves_fr (next_inst); |
| } |
| args_stored = 0; |
| continue; |
| } |
| |
| /* Quit if we hit any kind of branch. This can happen if a prologue |
| instruction is in the delay slot of the first call/branch. */ |
| if (is_branch (inst)) |
| break; |
| |
| /* What a crock. The HP compilers set args_stored even if no |
| arguments were stored into the stack (boo hiss). This could |
| cause this code to then skip a bunch of user insns (up to the |
| first branch). |
| |
| To combat this we try to identify when args_stored was bogusly |
| set and clear it. We only do this when args_stored is nonzero, |
| all other resources are accounted for, and nothing changed on |
| this pass. */ |
| if (args_stored |
| && ! (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0) |
| && old_save_gr == save_gr && old_save_fr == save_fr |
| && old_save_rp == save_rp && old_save_sp == save_sp |
| && old_stack_remaining == stack_remaining) |
| break; |
| |
| /* Bump the PC. */ |
| pc += 4; |
| } |
| |
| /* We've got a tenative location for the end of the prologue. However |
| because of limitations in the unwind descriptor mechanism we may |
| have went too far into user code looking for the save of a register |
| that does not exist. So, if there registers we expected to be saved |
| but never were, mask them out and restart. |
| |
| This should only happen in optimized code, and should be very rare. */ |
| if (save_gr || (save_fr && ! (restart_fr || restart_gr))) |
| { |
| pc = orig_pc; |
| restart_gr = save_gr; |
| restart_fr = save_fr; |
| goto restart; |
| } |
| |
| return pc; |
| } |
| |
| |
| |
| |
| |
| /* return 0 if we cannot determine the end of the prologue, |
| return the new pc value if we know where the prologue ends */ |
| |
| static CORE_ADDR |
| after_prologue (pc) |
| CORE_ADDR pc; |
| { |
| struct symtab_and_line sal; |
| CORE_ADDR func_addr, func_end; |
| struct symbol *f; |
| |
| if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end)) |
| return 0; /* Unknown */ |
| |
| f = find_pc_function (pc); |
| if (!f) |
| return 0; /* no debug info, do it the hard way! */ |
| |
| sal = find_pc_line (func_addr, 0); |
| |
| if (sal.end < func_end) |
| { |
| /* this happens when the function has no prologue, because the way |
| find_pc_line works: elz. Note: this may not be a very good |
| way to decide whether a function has a prologue or not, but |
| it is the best I can do with the info available |
| Also, this will work for functions like: int f() |
| { |
| return 2; |
| } |
| I.e. the bp will be inserted at the first open brace. |
| For functions where the body is only one line written like this: |
| int f() |
| { return 2; } |
| this will make the breakpoint to be at the last brace, after the body |
| has been executed already. What's the point of stepping through a function |
| without any variables anyway?? */ |
| |
| if ((SYMBOL_LINE(f) > 0) && (SYMBOL_LINE(f) < sal.line)) |
| return pc; /*no adjusment will be made*/ |
| else |
| return sal.end; /* this is the end of the prologue */ |
| } |
| /* The line after the prologue is after the end of the function. In this |
| case, put the end of the prologue is the beginning of the function. */ |
| /* This should happen only when the function is prologueless and has no |
| code in it. For instance void dumb(){} Note: this kind of function |
| is used quite a lot in the test system */ |
| |
| else return pc; /* no adjustment will be made */ |
| } |
| |
| /* To skip prologues, I use this predicate. Returns either PC itself |
| if the code at PC does not look like a function prologue; otherwise |
| returns an address that (if we're lucky) follows the prologue. If |
| LENIENT, then we must skip everything which is involved in setting |
| up the frame (it's OK to skip more, just so long as we don't skip |
| anything which might clobber the registers which are being saved. |
| Currently we must not skip more on the alpha, but we might the lenient |
| stuff some day. */ |
| |
| CORE_ADDR |
| hppa_skip_prologue (pc) |
| CORE_ADDR pc; |
| { |
| unsigned long inst; |
| int offset; |
| CORE_ADDR post_prologue_pc; |
| char buf[4]; |
| |
| #ifdef GDB_TARGET_HAS_SHARED_LIBS |
| /* Silently return the unaltered pc upon memory errors. |
| This could happen on OSF/1 if decode_line_1 tries to skip the |
| prologue for quickstarted shared library functions when the |
| shared library is not yet mapped in. |
| Reading target memory is slow over serial lines, so we perform |
| this check only if the target has shared libraries. */ |
| if (target_read_memory (pc, buf, 4)) |
| return pc; |
| #endif |
| |
| /* See if we can determine the end of the prologue via the symbol table. |
| If so, then return either PC, or the PC after the prologue, whichever |
| is greater. */ |
| |
| post_prologue_pc = after_prologue (pc); |
| |
| if (post_prologue_pc != 0) |
| return max (pc, post_prologue_pc); |
| |
| |
| /* Can't determine prologue from the symbol table, (this can happen if there |
| is no debug information) so we need to fall back on the old code, which |
| looks at the instructions */ |
| /* FIXME (elz) !!!!: this may create a problem if, once the bp is hit, the user says |
| where: the backtrace info is not right: this is because the point at which we |
| break is at the very first instruction of the function. At this time the stuff that |
| needs to be saved on the stack, has not been saved yet, so the backtrace |
| cannot know all it needs to know. This will need to be fixed in the |
| actual backtrace code. (Note: this is what DDE does) */ |
| |
| else |
| |
| return (skip_prologue_hard_way(pc)); |
| |
| #if 0 |
| /* elz: I am keeping this code around just in case, but remember, all the |
| instructions are for alpha: you should change all to the hppa instructions */ |
| |
| /* Can't determine prologue from the symbol table, need to examine |
| instructions. */ |
| |
| /* Skip the typical prologue instructions. These are the stack adjustment |
| instruction and the instructions that save registers on the stack |
| or in the gcc frame. */ |
| for (offset = 0; offset < 100; offset += 4) |
| { |
| int status; |
| |
| status = read_memory_nobpt (pc + offset, buf, 4); |
| if (status) |
| memory_error (status, pc + offset); |
| inst = extract_unsigned_integer (buf, 4); |
| |
| /* The alpha has no delay slots. But let's keep the lenient stuff, |
| we might need it for something else in the future. */ |
| if (lenient && 0) |
| continue; |
| |
| if ((inst & 0xffff0000) == 0x27bb0000) /* ldah $gp,n($t12) */ |
| continue; |
| if ((inst & 0xffff0000) == 0x23bd0000) /* lda $gp,n($gp) */ |
| continue; |
| if ((inst & 0xffff0000) == 0x23de0000) /* lda $sp,n($sp) */ |
| continue; |
| else if ((inst & 0xfc1f0000) == 0xb41e0000 |
| && (inst & 0xffff0000) != 0xb7fe0000) |
| continue; /* stq reg,n($sp) */ |
| /* reg != $zero */ |
| else if ((inst & 0xfc1f0000) == 0x9c1e0000 |
| && (inst & 0xffff0000) != 0x9ffe0000) |
| continue; /* stt reg,n($sp) */ |
| /* reg != $zero */ |
| else if (inst == 0x47de040f) /* bis sp,sp,fp */ |
| continue; |
| else |
| break; |
| } |
| return pc + offset; |
| #endif /* 0 */ |
| } |
| |
| /* Put here the code to store, into a struct frame_saved_regs, |
| the addresses of the saved registers of frame described by FRAME_INFO. |
| This includes special registers such as pc and fp saved in special |
| ways in the stack frame. sp is even more special: |
| the address we return for it IS the sp for the next frame. */ |
| |
| void |
| hppa_frame_find_saved_regs (frame_info, frame_saved_regs) |
| struct frame_info *frame_info; |
| struct frame_saved_regs *frame_saved_regs; |
| { |
| CORE_ADDR pc; |
| struct unwind_table_entry *u; |
| unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp; |
| int status, i, reg; |
| char buf[4]; |
| int fp_loc = -1; |
| |
| /* Zero out everything. */ |
| memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs)); |
| |
| /* Call dummy frames always look the same, so there's no need to |
| examine the dummy code to determine locations of saved registers; |
| instead, let find_dummy_frame_regs fill in the correct offsets |
| for the saved registers. */ |
| if ((frame_info->pc >= frame_info->frame |
| && frame_info->pc <= (frame_info->frame + CALL_DUMMY_LENGTH |
| + 32 * 4 + (NUM_REGS - FP0_REGNUM) * 8 |
| + 6 * 4))) |
| find_dummy_frame_regs (frame_info, frame_saved_regs); |
| |
| /* Interrupt handlers are special too. They lay out the register |
| state in the exact same order as the register numbers in GDB. */ |
| if (pc_in_interrupt_handler (frame_info->pc)) |
| { |
| for (i = 0; i < NUM_REGS; i++) |
| { |
| /* SP is a little special. */ |
| if (i == SP_REGNUM) |
| frame_saved_regs->regs[SP_REGNUM] |
| = read_memory_integer (frame_info->frame + SP_REGNUM * 4, 4); |
| else |
| frame_saved_regs->regs[i] = frame_info->frame + i * 4; |
| } |
| return; |
| } |
| |
| #ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP |
| /* Handle signal handler callers. */ |
| if (frame_info->signal_handler_caller) |
| { |
| FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs); |
| return; |
| } |
| #endif |
| |
| /* Get the starting address of the function referred to by the PC |
| saved in frame. */ |
| pc = get_pc_function_start (frame_info->pc); |
| |
| /* Yow! */ |
| u = find_unwind_entry (pc); |
| if (!u) |
| return; |
| |
| /* This is how much of a frame adjustment we need to account for. */ |
| stack_remaining = u->Total_frame_size << 3; |
| |
| /* Magic register saves we want to know about. */ |
| save_rp = u->Save_RP; |
| save_sp = u->Save_SP; |
| |
| /* Turn the Entry_GR field into a bitmask. */ |
| save_gr = 0; |
| for (i = 3; i < u->Entry_GR + 3; i++) |
| { |
| /* Frame pointer gets saved into a special location. */ |
| if (u->Save_SP && i == FP_REGNUM) |
| continue; |
| |
| save_gr |= (1 << i); |
| } |
| |
| /* Turn the Entry_FR field into a bitmask too. */ |
| save_fr = 0; |
| for (i = 12; i < u->Entry_FR + 12; i++) |
| save_fr |= (1 << i); |
| |
| /* The frame always represents the value of %sp at entry to the |
| current function (and is thus equivalent to the "saved" stack |
| pointer. */ |
| frame_saved_regs->regs[SP_REGNUM] = frame_info->frame; |
| |
| /* Loop until we find everything of interest or hit a branch. |
| |
| For unoptimized GCC code and for any HP CC code this will never ever |
| examine any user instructions. |
| |
| For optimzied GCC code we're faced with problems. GCC will schedule |
| its prologue and make prologue instructions available for delay slot |
| filling. The end result is user code gets mixed in with the prologue |
| and a prologue instruction may be in the delay slot of the first branch |
| or call. |
| |
| Some unexpected things are expected with debugging optimized code, so |
| we allow this routine to walk past user instructions in optimized |
| GCC code. */ |
| while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0) |
| { |
| status = target_read_memory (pc, buf, 4); |
| inst = extract_unsigned_integer (buf, 4); |
| |
| /* Yow! */ |
| if (status != 0) |
| return; |
| |
| /* Note the interesting effects of this instruction. */ |
| stack_remaining -= prologue_inst_adjust_sp (inst); |
| |
| /* There is only one instruction used for saving RP into the stack. */ |
| if (inst == 0x6bc23fd9) |
| { |
| save_rp = 0; |
| frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20; |
| } |
| |
| /* Just note that we found the save of SP into the stack. The |
| value for frame_saved_regs was computed above. */ |
| if ((inst & 0xffffc000) == 0x6fc10000) |
| save_sp = 0; |
| |
| /* Account for general and floating-point register saves. */ |
| reg = inst_saves_gr (inst); |
| if (reg >= 3 && reg <= 18 |
| && (!u->Save_SP || reg != FP_REGNUM)) |
| { |
| save_gr &= ~(1 << reg); |
| |
| /* stwm with a positive displacement is a *post modify*. */ |
| if ((inst >> 26) == 0x1b |
| && extract_14 (inst) >= 0) |
| frame_saved_regs->regs[reg] = frame_info->frame; |
| else |
| { |
| /* Handle code with and without frame pointers. */ |
| if (u->Save_SP) |
| frame_saved_regs->regs[reg] |
| = frame_info->frame + extract_14 (inst); |
| else |
| frame_saved_regs->regs[reg] |
| = frame_info->frame + (u->Total_frame_size << 3) |
| + extract_14 (inst); |
| } |
| } |
| |
| |
| /* GCC handles callee saved FP regs a little differently. |
| |
| It emits an instruction to put the value of the start of |
| the FP store area into %r1. It then uses fstds,ma with |
| a basereg of %r1 for the stores. |
| |
| HP CC emits them at the current stack pointer modifying |
| the stack pointer as it stores each register. */ |
| |
| /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */ |
| if ((inst & 0xffffc000) == 0x34610000 |
| || (inst & 0xffffc000) == 0x37c10000) |
| fp_loc = extract_14 (inst); |
| |
| reg = inst_saves_fr (inst); |
| if (reg >= 12 && reg <= 21) |
| { |
| /* Note +4 braindamage below is necessary because the FP status |
| registers are internally 8 registers rather than the expected |
| 4 registers. */ |
| save_fr &= ~(1 << reg); |
| if (fp_loc == -1) |
| { |
| /* 1st HP CC FP register store. After this instruction |
| we've set enough state that the GCC and HPCC code are |
| both handled in the same manner. */ |
| frame_saved_regs->regs[reg + FP4_REGNUM + 4] = frame_info->frame; |
| fp_loc = 8; |
| } |
| else |
| { |
| frame_saved_regs->regs[reg + FP0_REGNUM + 4] |
| = frame_info->frame + fp_loc; |
| fp_loc += 8; |
| } |
| } |
| |
| /* Quit if we hit any kind of branch. This can happen if a prologue |
| instruction is in the delay slot of the first call/branch. */ |
| if (is_branch (inst)) |
| break; |
| |
| /* Bump the PC. */ |
| pc += 4; |
| } |
| } |
| |
| |
| /* Exception handling support for the HP-UX ANSI C++ compiler. |
| The compiler (aCC) provides a callback for exception events; |
| GDB can set a breakpoint on this callback and find out what |
| exception event has occurred. */ |
| |
| /* The name of the hook to be set to point to the callback function */ |
| static char HP_ACC_EH_notify_hook[] = "__eh_notify_hook"; |
| /* The name of the function to be used to set the hook value */ |
| static char HP_ACC_EH_set_hook_value[] = "__eh_set_hook_value"; |
| /* The name of the callback function in end.o */ |
| static char HP_ACC_EH_notify_callback[] = "__d_eh_notify_callback"; |
| /* Name of function in end.o on which a break is set (called by above) */ |
| static char HP_ACC_EH_break[] = "__d_eh_break"; |
| /* Name of flag (in end.o) that enables catching throws */ |
| static char HP_ACC_EH_catch_throw[] = "__d_eh_catch_throw"; |
| /* Name of flag (in end.o) that enables catching catching */ |
| static char HP_ACC_EH_catch_catch[] = "__d_eh_catch_catch"; |
| /* The enum used by aCC */ |
| typedef enum { |
| __EH_NOTIFY_THROW, |
| __EH_NOTIFY_CATCH |
| } __eh_notification; |
| |
| /* Is exception-handling support available with this executable? */ |
| static int hp_cxx_exception_support = 0; |
| /* Has the initialize function been run? */ |
| int hp_cxx_exception_support_initialized = 0; |
| /* Similar to above, but imported from breakpoint.c -- non-target-specific */ |
| extern int exception_support_initialized; |
| /* Address of __eh_notify_hook */ |
| static CORE_ADDR eh_notify_hook_addr = NULL; |
| /* Address of __d_eh_notify_callback */ |
| static CORE_ADDR eh_notify_callback_addr = NULL; |
| /* Address of __d_eh_break */ |
| static CORE_ADDR eh_break_addr = NULL; |
| /* Address of __d_eh_catch_catch */ |
| static CORE_ADDR eh_catch_catch_addr = NULL; |
| /* Address of __d_eh_catch_throw */ |
| static CORE_ADDR eh_catch_throw_addr = NULL; |
| /* Sal for __d_eh_break */ |
| static struct symtab_and_line * break_callback_sal = NULL; |
| |
| /* Code in end.c expects __d_pid to be set in the inferior, |
| otherwise __d_eh_notify_callback doesn't bother to call |
| __d_eh_break! So we poke the pid into this symbol |
| ourselves. |
| 0 => success |
| 1 => failure */ |
| int |
| setup_d_pid_in_inferior () |
| { |
| CORE_ADDR anaddr; |
| struct minimal_symbol * msymbol; |
| char buf[4]; /* FIXME 32x64? */ |
| |
| /* Slam the pid of the process into __d_pid; failing is only a warning! */ |
| msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile); |
| if (msymbol == NULL) |
| { |
| warning ("Unable to find __d_pid symbol in object file."); |
| warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| return 1; |
| } |
| |
| anaddr = SYMBOL_VALUE_ADDRESS (msymbol); |
| store_unsigned_integer (buf, 4, inferior_pid); /* FIXME 32x64? */ |
| if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */ |
| { |
| warning ("Unable to write __d_pid"); |
| warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* Initialize exception catchpoint support by looking for the |
| necessary hooks/callbacks in end.o, etc., and set the hook value to |
| point to the required debug function |
| |
| Return 0 => failure |
| 1 => success */ |
| |
| static int |
| initialize_hp_cxx_exception_support () |
| { |
| struct symtabs_and_lines sals; |
| struct cleanup * old_chain; |
| struct cleanup * canonical_strings_chain = NULL; |
| int i; |
| char * addr_start; |
| char * addr_end = NULL; |
| char ** canonical = (char **) NULL; |
| int thread = -1; |
| struct symbol * sym = NULL; |
| struct minimal_symbol * msym = NULL; |
| struct objfile * objfile; |
| asection *shlib_info; |
| |
| /* Detect and disallow recursion. On HP-UX with aCC, infinite |
| recursion is a possibility because finding the hook for exception |
| callbacks involves making a call in the inferior, which means |
| re-inserting breakpoints which can re-invoke this code */ |
| |
| static int recurse = 0; |
| if (recurse > 0) |
| { |
| hp_cxx_exception_support_initialized = 0; |
| exception_support_initialized = 0; |
| return 0; |
| } |
| |
| hp_cxx_exception_support = 0; |
| |
| /* First check if we have seen any HP compiled objects; if not, |
| it is very unlikely that HP's idiosyncratic callback mechanism |
| for exception handling debug support will be available! |
| This will percolate back up to breakpoint.c, where our callers |
| will decide to try the g++ exception-handling support instead. */ |
| if (!hp_som_som_object_present) |
| return 0; |
| |
| /* We have a SOM executable with SOM debug info; find the hooks */ |
| |
| /* First look for the notify hook provided by aCC runtime libs */ |
| /* If we find this symbol, we conclude that the executable must |
| have HP aCC exception support built in. If this symbol is not |
| found, even though we're a HP SOM-SOM file, we may have been |
| built with some other compiler (not aCC). This results percolates |
| back up to our callers in breakpoint.c which can decide to |
| try the g++ style of exception support instead. |
| If this symbol is found but the other symbols we require are |
| not found, there is something weird going on, and g++ support |
| should *not* be tried as an alternative. |
| |
| ASSUMPTION: Only HP aCC code will have __eh_notify_hook defined. |
| ASSUMPTION: HP aCC and g++ modules cannot be linked together. */ |
| |
| /* libCsup has this hook; it'll usually be non-debuggable */ |
| msym = lookup_minimal_symbol (HP_ACC_EH_notify_hook, NULL, NULL); |
| if (msym) |
| { |
| eh_notify_hook_addr = SYMBOL_VALUE_ADDRESS (msym); |
| hp_cxx_exception_support = 1; |
| } |
| else |
| { |
| warning ("Unable to find exception callback hook (%s).", HP_ACC_EH_notify_hook); |
| warning ("Executable may not have been compiled debuggable with HP aCC."); |
| warning ("GDB will be unable to intercept exception events."); |
| eh_notify_hook_addr = 0; |
| hp_cxx_exception_support = 0; |
| return 0; |
| } |
| |
| /* Next look for the notify callback routine in end.o */ |
| /* This is always available in the SOM symbol dictionary if end.o is linked in */ |
| msym = lookup_minimal_symbol (HP_ACC_EH_notify_callback, NULL, NULL); |
| if (msym) |
| { |
| eh_notify_callback_addr = SYMBOL_VALUE_ADDRESS (msym); |
| hp_cxx_exception_support = 1; |
| } |
| else |
| { |
| warning ("Unable to find exception callback routine (%s).", HP_ACC_EH_notify_callback); |
| warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| warning ("GDB will be unable to intercept exception events."); |
| eh_notify_callback_addr = 0; |
| return 0; |
| } |
| |
| /* Check whether the executable is dynamically linked or archive bound */ |
| /* With an archive-bound executable we can use the raw addresses we find |
| for the callback function, etc. without modification. For an executable |
| with shared libraries, we have to do more work to find the plabel, which |
| can be the target of a call through $$dyncall from the aCC runtime support |
| library (libCsup) which is linked shared by default by aCC. */ |
| /* This test below was copied from somsolib.c/somread.c. It may not be a very |
| reliable one to test that an executable is linked shared. pai/1997-07-18 */ |
| shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$"); |
| if (shlib_info && (bfd_section_size (symfile_objfile->obfd, shlib_info) != 0)) |
| { |
| /* The minsym we have has the local code address, but that's not the |
| plabel that can be used by an inter-load-module call. */ |
| /* Find solib handle for main image (which has end.o), and use that |
| and the min sym as arguments to __d_shl_get() (which does the equivalent |
| of shl_findsym()) to find the plabel. */ |
| |
| args_for_find_stub args; |
| static char message[] = "Error while finding exception callback hook:\n"; |
| |
| args.solib_handle = som_solib_get_solib_by_pc (eh_notify_callback_addr); |
| args.msym = msym; |
| |
| recurse++; |
| eh_notify_callback_addr = catch_errors ((int (*) PARAMS ((char *))) cover_find_stub_with_shl_get, |
| (char *) &args, |
| message, RETURN_MASK_ALL); |
| recurse--; |
| |
| exception_catchpoints_are_fragile = 1; |
| |
| if (!eh_notify_callback_addr) |
| { |
| /* We can get here either if there is no plabel in the export list |
| for the main image, or if something strange happened (??) */ |
| warning ("Couldn't find a plabel (indirect function label) for the exception callback."); |
| warning ("GDB will not be able to intercept exception events."); |
| return 0; |
| } |
| } |
| else |
| exception_catchpoints_are_fragile = 0; |
| |
| /* Now, look for the breakpointable routine in end.o */ |
| /* This should also be available in the SOM symbol dict. if end.o linked in */ |
| msym = lookup_minimal_symbol (HP_ACC_EH_break, NULL, NULL); |
| if (msym) |
| { |
| eh_break_addr = SYMBOL_VALUE_ADDRESS (msym); |
| hp_cxx_exception_support = 1; |
| } |
| else |
| { |
| warning ("Unable to find exception callback routine to set breakpoint (%s).", HP_ACC_EH_break); |
| warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| warning ("GDB will be unable to intercept exception events."); |
| eh_break_addr = 0; |
| return 0; |
| } |
| |
| /* Next look for the catch enable flag provided in end.o */ |
| sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL, |
| VAR_NAMESPACE, 0, (struct symtab **) NULL); |
| if (sym) /* sometimes present in debug info */ |
| { |
| eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (sym); |
| hp_cxx_exception_support = 1; |
| } |
| else /* otherwise look in SOM symbol dict. */ |
| { |
| msym = lookup_minimal_symbol (HP_ACC_EH_catch_catch, NULL, NULL); |
| if (msym) |
| { |
| eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (msym); |
| hp_cxx_exception_support = 1; |
| } |
| else |
| { |
| warning ("Unable to enable interception of exception catches."); |
| warning ("Executable may not have been compiled debuggable with HP aCC."); |
| warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| return 0; |
| } |
| } |
| |
| /* Next look for the catch enable flag provided end.o */ |
| sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL, |
| VAR_NAMESPACE, 0, (struct symtab **) NULL); |
| if (sym) /* sometimes present in debug info */ |
| { |
| eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (sym); |
| hp_cxx_exception_support = 1; |
| } |
| else /* otherwise look in SOM symbol dict. */ |
| { |
| msym = lookup_minimal_symbol (HP_ACC_EH_catch_throw, NULL, NULL); |
| if (msym) |
| { |
| eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (msym); |
| hp_cxx_exception_support = 1; |
| } |
| else |
| { |
| warning ("Unable to enable interception of exception throws."); |
| warning ("Executable may not have been compiled debuggable with HP aCC."); |
| warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| return 0; |
| } |
| } |
| |
| /* Set the flags */ |
| hp_cxx_exception_support = 2; /* everything worked so far */ |
| hp_cxx_exception_support_initialized = 1; |
| exception_support_initialized = 1; |
| |
| return 1; |
| } |
| |
| /* Target operation for enabling or disabling interception of |
| exception events. |
| KIND is either EX_EVENT_THROW or EX_EVENT_CATCH |
| ENABLE is either 0 (disable) or 1 (enable). |
| Return value is NULL if no support found; |
| -1 if something went wrong, |
| or a pointer to a symtab/line struct if the breakpointable |
| address was found. */ |
| |
| struct symtab_and_line * |
| child_enable_exception_callback (kind, enable) |
| enum exception_event_kind kind; |
| int enable; |
| { |
| char buf[4]; |
| |
| if (!exception_support_initialized || !hp_cxx_exception_support_initialized) |
| if (!initialize_hp_cxx_exception_support ()) |
| return NULL; |
| |
| switch (hp_cxx_exception_support) |
| { |
| case 0: |
| /* Assuming no HP support at all */ |
| return NULL; |
| case 1: |
| /* HP support should be present, but something went wrong */ |
| return (struct symtab_and_line *) -1; /* yuck! */ |
| /* there may be other cases in the future */ |
| } |
| |
| /* Set the EH hook to point to the callback routine */ |
| store_unsigned_integer (buf, 4, enable ? eh_notify_callback_addr : 0); /* FIXME 32x64 problem */ |
| /* pai: (temp) FIXME should there be a pack operation first? */ |
| if (target_write_memory (eh_notify_hook_addr, buf, 4)) /* FIXME 32x64 problem */ |
| { |
| warning ("Could not write to target memory for exception event callback."); |
| warning ("Interception of exception events may not work."); |
| return (struct symtab_and_line *) -1; |
| } |
| if (enable) |
| { |
| /* Ensure that __d_pid is set up correctly -- end.c code checks this. :-(*/ |
| if (inferior_pid > 0) |
| { |
| if (setup_d_pid_in_inferior ()) |
| return (struct symtab_and_line *) -1; |
| } |
| else |
| { |
| warning ("Internal error: Invalid inferior pid? Cannot intercept exception events."); /* purecov: deadcode */ |
| return (struct symtab_and_line *) -1; /* purecov: deadcode */ |
| } |
| } |
| |
| switch (kind) |
| { |
| case EX_EVENT_THROW: |
| store_unsigned_integer (buf, 4, enable ? 1 : 0); |
| if (target_write_memory (eh_catch_throw_addr, buf, 4)) /* FIXME 32x64? */ |
| { |
| warning ("Couldn't enable exception throw interception."); |
| return (struct symtab_and_line *) -1; |
| } |
| break; |
| case EX_EVENT_CATCH: |
| store_unsigned_integer (buf, 4, enable ? 1 : 0); |
| if (target_write_memory (eh_catch_catch_addr, buf, 4)) /* FIXME 32x64? */ |
| { |
| warning ("Couldn't enable exception catch interception."); |
| return (struct symtab_and_line *) -1; |
| } |
| break; |
| default: /* purecov: deadcode */ |
| error ("Request to enable unknown or unsupported exception event."); /* purecov: deadcode */ |
| } |
| |
| /* Copy break address into new sal struct, malloc'ing if needed. */ |
| if (!break_callback_sal) |
| { |
| break_callback_sal = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line)); |
| } |
| INIT_SAL(break_callback_sal); |
| break_callback_sal->symtab = NULL; |
| break_callback_sal->pc = eh_break_addr; |
| break_callback_sal->line = 0; |
| break_callback_sal->end = eh_break_addr; |
| |
| return break_callback_sal; |
| } |
| |
| /* Record some information about the current exception event */ |
| static struct exception_event_record current_ex_event; |
| /* Convenience struct */ |
| static struct symtab_and_line null_symtab_and_line = { NULL, 0, 0, 0 }; |
| |
| /* Report current exception event. Returns a pointer to a record |
| that describes the kind of the event, where it was thrown from, |
| and where it will be caught. More information may be reported |
| in the future */ |
| struct exception_event_record * |
| child_get_current_exception_event () |
| { |
| CORE_ADDR event_kind; |
| CORE_ADDR throw_addr; |
| CORE_ADDR catch_addr; |
| struct frame_info *fi, *curr_frame; |
| int level = 1; |
| |
| curr_frame = get_current_frame(); |
| if (!curr_frame) |
| return (struct exception_event_record *) NULL; |
| |
| /* Go up one frame to __d_eh_notify_callback, because at the |
| point when this code is executed, there's garbage in the |
| arguments of __d_eh_break. */ |
| fi = find_relative_frame (curr_frame, &level); |
| if (level != 0) |
| return (struct exception_event_record *) NULL; |
| |
| select_frame (fi, -1); |
| |
| /* Read in the arguments */ |
| /* __d_eh_notify_callback() is called with 3 arguments: |
| 1. event kind catch or throw |
| 2. the target address if known |
| 3. a flag -- not sure what this is. pai/1997-07-17 */ |
| event_kind = read_register (ARG0_REGNUM); |
| catch_addr = read_register (ARG1_REGNUM); |
| |
| /* Now go down to a user frame */ |
| /* For a throw, __d_eh_break is called by |
| __d_eh_notify_callback which is called by |
| __notify_throw which is called |
| from user code. |
| For a catch, __d_eh_break is called by |
| __d_eh_notify_callback which is called by |
| <stackwalking stuff> which is called by |
| __throw__<stuff> or __rethrow_<stuff> which is called |
| from user code. */ |
| /* FIXME: Don't use such magic numbers; search for the frames */ |
| level = (event_kind == EX_EVENT_THROW) ? 3 : 4; |
| fi = find_relative_frame (curr_frame, &level); |
| if (level != 0) |
| return (struct exception_event_record *) NULL; |
| |
| select_frame (fi, -1); |
| throw_addr = fi->pc; |
| |
| /* Go back to original (top) frame */ |
| select_frame (curr_frame, -1); |
| |
| current_ex_event.kind = (enum exception_event_kind) event_kind; |
| current_ex_event.throw_sal = find_pc_line (throw_addr, 1); |
| current_ex_event.catch_sal = find_pc_line (catch_addr, 1); |
| |
| return ¤t_ex_event; |
| } |
| |
| static void |
| unwind_command (exp, from_tty) |
| char *exp; |
| int from_tty; |
| { |
| CORE_ADDR address; |
| struct unwind_table_entry *u; |
| |
| /* If we have an expression, evaluate it and use it as the address. */ |
| |
| if (exp != 0 && *exp != 0) |
| address = parse_and_eval_address (exp); |
| else |
| return; |
| |
| u = find_unwind_entry (address); |
| |
| if (!u) |
| { |
| printf_unfiltered ("Can't find unwind table entry for %s\n", exp); |
| return; |
| } |
| |
| printf_unfiltered ("unwind_table_entry (0x%x):\n", u); |
| |
| printf_unfiltered ("\tregion_start = "); |
| print_address (u->region_start, gdb_stdout); |
| |
| printf_unfiltered ("\n\tregion_end = "); |
| print_address (u->region_end, gdb_stdout); |
| |
| #ifdef __STDC__ |
| #define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD); |
| #else |
| #define pif(FLD) if (u->FLD) printf_unfiltered (" FLD"); |
| #endif |
| |
| printf_unfiltered ("\n\tflags ="); |
| pif (Cannot_unwind); |
| pif (Millicode); |
| pif (Millicode_save_sr0); |
| pif (Entry_SR); |
| pif (Args_stored); |
| pif (Variable_Frame); |
| pif (Separate_Package_Body); |
| pif (Frame_Extension_Millicode); |
| pif (Stack_Overflow_Check); |
| pif (Two_Instruction_SP_Increment); |
| pif (Ada_Region); |
| pif (Save_SP); |
| pif (Save_RP); |
| pif (Save_MRP_in_frame); |
| pif (extn_ptr_defined); |
| pif (Cleanup_defined); |
| pif (MPE_XL_interrupt_marker); |
| pif (HP_UX_interrupt_marker); |
| pif (Large_frame); |
| |
| putchar_unfiltered ('\n'); |
| |
| #ifdef __STDC__ |
| #define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD); |
| #else |
| #define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD); |
| #endif |
| |
| pin (Region_description); |
| pin (Entry_FR); |
| pin (Entry_GR); |
| pin (Total_frame_size); |
| } |
| |
| #ifdef PREPARE_TO_PROCEED |
| |
| /* If the user has switched threads, and there is a breakpoint |
| at the old thread's pc location, then switch to that thread |
| and return TRUE, else return FALSE and don't do a thread |
| switch (or rather, don't seem to have done a thread switch). |
| |
| Ptrace-based gdb will always return FALSE to the thread-switch |
| query, and thus also to PREPARE_TO_PROCEED. |
| |
| The important thing is whether there is a BPT instruction, |
| not how many user breakpoints there are. So we have to worry |
| about things like these: |
| |
| o Non-bp stop -- NO |
| |
| o User hits bp, no switch -- NO |
| |
| o User hits bp, switches threads -- YES |
| |
| o User hits bp, deletes bp, switches threads -- NO |
| |
| o User hits bp, deletes one of two or more bps |
| at that PC, user switches threads -- YES |
| |
| o Plus, since we're buffering events, the user may have hit a |
| breakpoint, deleted the breakpoint and then gotten another |
| hit on that same breakpoint on another thread which |
| actually hit before the delete. (FIXME in breakpoint.c |
| so that "dead" breakpoints are ignored?) -- NO |
| |
| For these reasons, we have to violate information hiding and |
| call "breakpoint_here_p". If core gdb thinks there is a bpt |
| here, that's what counts, as core gdb is the one which is |
| putting the BPT instruction in and taking it out. */ |
| int |
| hppa_prepare_to_proceed() |
| { |
| pid_t old_thread; |
| pid_t current_thread; |
| |
| old_thread = hppa_switched_threads(inferior_pid); |
| if (old_thread != 0) |
| { |
| /* Switched over from "old_thread". Try to do |
| as little work as possible, 'cause mostly |
| we're going to switch back. */ |
| CORE_ADDR new_pc; |
| CORE_ADDR old_pc = read_pc(); |
| |
| /* Yuk, shouldn't use global to specify current |
| thread. But that's how gdb does it. */ |
| current_thread = inferior_pid; |
| inferior_pid = old_thread; |
| |
| new_pc = read_pc(); |
| if (new_pc != old_pc /* If at same pc, no need */ |
| && breakpoint_here_p (new_pc)) |
| { |
| /* User hasn't deleted the BP. |
| Return TRUE, finishing switch to "old_thread". */ |
| flush_cached_frames (); |
| registers_changed (); |
| #if 0 |
| printf("---> PREPARE_TO_PROCEED (was %d, now %d)!\n", |
| current_thread, inferior_pid); |
| #endif |
| |
| return 1; |
| } |
| |
| /* Otherwise switch back to the user-chosen thread. */ |
| inferior_pid = current_thread; |
| new_pc = read_pc(); /* Re-prime register cache */ |
| } |
| |
| return 0; |
| } |
| #endif /* PREPARE_TO_PROCEED */ |
| |
| void |
| _initialize_hppa_tdep () |
| { |
| tm_print_insn = print_insn_hppa; |
| |
| add_cmd ("unwind", class_maintenance, unwind_command, |
| "Print unwind table entry at given address.", |
| &maintenanceprintlist); |
| } |