| /* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger. |
| |
| Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, |
| 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. |
| |
| Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU |
| and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place - Suite 330, |
| Boston, MA 02111-1307, USA. */ |
| |
| #include "defs.h" |
| #include "gdb_string.h" |
| #include "gdb_assert.h" |
| #include "frame.h" |
| #include "inferior.h" |
| #include "symtab.h" |
| #include "value.h" |
| #include "gdbcmd.h" |
| #include "language.h" |
| #include "gdbcore.h" |
| #include "symfile.h" |
| #include "objfiles.h" |
| #include "gdbtypes.h" |
| #include "target.h" |
| #include "arch-utils.h" |
| #include "regcache.h" |
| #include "osabi.h" |
| #include "mips-tdep.h" |
| #include "block.h" |
| |
| #include "opcode/mips.h" |
| #include "elf/mips.h" |
| #include "elf-bfd.h" |
| #include "symcat.h" |
| |
| /* A useful bit in the CP0 status register (PS_REGNUM). */ |
| /* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */ |
| #define ST0_FR (1 << 26) |
| |
| /* The sizes of floating point registers. */ |
| |
| enum |
| { |
| MIPS_FPU_SINGLE_REGSIZE = 4, |
| MIPS_FPU_DOUBLE_REGSIZE = 8 |
| }; |
| |
| |
| static const char *mips_abi_string; |
| |
| static const char *mips_abi_strings[] = { |
| "auto", |
| "n32", |
| "o32", |
| "n64", |
| "o64", |
| "eabi32", |
| "eabi64", |
| NULL |
| }; |
| |
| struct frame_extra_info |
| { |
| mips_extra_func_info_t proc_desc; |
| int num_args; |
| }; |
| |
| /* Various MIPS ISA options (related to stack analysis) can be |
| overridden dynamically. Establish an enum/array for managing |
| them. */ |
| |
| static const char size_auto[] = "auto"; |
| static const char size_32[] = "32"; |
| static const char size_64[] = "64"; |
| |
| static const char *size_enums[] = { |
| size_auto, |
| size_32, |
| size_64, |
| 0 |
| }; |
| |
| /* Some MIPS boards don't support floating point while others only |
| support single-precision floating-point operations. See also |
| FP_REGISTER_DOUBLE. */ |
| |
| enum mips_fpu_type |
| { |
| MIPS_FPU_DOUBLE, /* Full double precision floating point. */ |
| MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */ |
| MIPS_FPU_NONE /* No floating point. */ |
| }; |
| |
| #ifndef MIPS_DEFAULT_FPU_TYPE |
| #define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE |
| #endif |
| static int mips_fpu_type_auto = 1; |
| static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE; |
| |
| static int mips_debug = 0; |
| |
| /* MIPS specific per-architecture information */ |
| struct gdbarch_tdep |
| { |
| /* from the elf header */ |
| int elf_flags; |
| |
| /* mips options */ |
| enum mips_abi mips_abi; |
| enum mips_abi found_abi; |
| enum mips_fpu_type mips_fpu_type; |
| int mips_last_arg_regnum; |
| int mips_last_fp_arg_regnum; |
| int mips_default_saved_regsize; |
| int mips_fp_register_double; |
| int mips_default_stack_argsize; |
| int gdb_target_is_mips64; |
| int default_mask_address_p; |
| }; |
| |
| #define MIPS_EABI (gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI32 \ |
| || gdbarch_tdep (current_gdbarch)->mips_abi == MIPS_ABI_EABI64) |
| |
| #define MIPS_LAST_FP_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_fp_arg_regnum) |
| |
| #define MIPS_LAST_ARG_REGNUM (gdbarch_tdep (current_gdbarch)->mips_last_arg_regnum) |
| |
| #define MIPS_FPU_TYPE (gdbarch_tdep (current_gdbarch)->mips_fpu_type) |
| |
| /* Return the currently configured (or set) saved register size. */ |
| |
| #define MIPS_DEFAULT_SAVED_REGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_saved_regsize) |
| |
| static const char *mips_saved_regsize_string = size_auto; |
| |
| #define MIPS_SAVED_REGSIZE (mips_saved_regsize()) |
| |
| /* Return the MIPS ABI associated with GDBARCH. */ |
| enum mips_abi |
| mips_abi (struct gdbarch *gdbarch) |
| { |
| return gdbarch_tdep (gdbarch)->mips_abi; |
| } |
| |
| static unsigned int |
| mips_saved_regsize (void) |
| { |
| if (mips_saved_regsize_string == size_auto) |
| return MIPS_DEFAULT_SAVED_REGSIZE; |
| else if (mips_saved_regsize_string == size_64) |
| return 8; |
| else /* if (mips_saved_regsize_string == size_32) */ |
| return 4; |
| } |
| |
| /* Functions for setting and testing a bit in a minimal symbol that |
| marks it as 16-bit function. The MSB of the minimal symbol's |
| "info" field is used for this purpose. This field is already |
| being used to store the symbol size, so the assumption is |
| that the symbol size cannot exceed 2^31. |
| |
| ELF_MAKE_MSYMBOL_SPECIAL tests whether an ELF symbol is "special", |
| i.e. refers to a 16-bit function, and sets a "special" bit in a |
| minimal symbol to mark it as a 16-bit function |
| |
| MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol |
| MSYMBOL_SIZE returns the size of the minimal symbol, i.e. |
| the "info" field with the "special" bit masked out */ |
| |
| static void |
| mips_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym) |
| { |
| if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16) |
| { |
| MSYMBOL_INFO (msym) = (char *) |
| (((long) MSYMBOL_INFO (msym)) | 0x80000000); |
| SYMBOL_VALUE_ADDRESS (msym) |= 1; |
| } |
| } |
| |
| static int |
| msymbol_is_special (struct minimal_symbol *msym) |
| { |
| return (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0); |
| } |
| |
| static long |
| msymbol_size (struct minimal_symbol *msym) |
| { |
| return ((long) MSYMBOL_INFO (msym) & 0x7fffffff); |
| } |
| |
| /* XFER a value from the big/little/left end of the register. |
| Depending on the size of the value it might occupy the entire |
| register or just part of it. Make an allowance for this, aligning |
| things accordingly. */ |
| |
| static void |
| mips_xfer_register (struct regcache *regcache, int reg_num, int length, |
| enum bfd_endian endian, bfd_byte *in, const bfd_byte *out, |
| int buf_offset) |
| { |
| bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE); |
| int reg_offset = 0; |
| /* Need to transfer the left or right part of the register, based on |
| the targets byte order. */ |
| switch (endian) |
| { |
| case BFD_ENDIAN_BIG: |
| reg_offset = REGISTER_RAW_SIZE (reg_num) - length; |
| break; |
| case BFD_ENDIAN_LITTLE: |
| reg_offset = 0; |
| break; |
| case BFD_ENDIAN_UNKNOWN: /* Indicates no alignment. */ |
| reg_offset = 0; |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, "bad switch"); |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, |
| "xfer $%d, reg offset %d, buf offset %d, length %d, ", |
| reg_num, reg_offset, buf_offset, length); |
| if (mips_debug && out != NULL) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, "out "); |
| for (i = 0; i < length; i++) |
| fprintf_unfiltered (gdb_stdlog, "%02x", out[buf_offset + i]); |
| } |
| if (in != NULL) |
| regcache_raw_read_part (regcache, reg_num, reg_offset, length, in + buf_offset); |
| if (out != NULL) |
| regcache_raw_write_part (regcache, reg_num, reg_offset, length, out + buf_offset); |
| if (mips_debug && in != NULL) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, "in "); |
| for (i = 0; i < length; i++) |
| fprintf_unfiltered (gdb_stdlog, "%02x", in[buf_offset + i]); |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, "\n"); |
| } |
| |
| /* Determine if a MIPS3 or later cpu is operating in MIPS{1,2} FPU |
| compatiblity mode. A return value of 1 means that we have |
| physical 64-bit registers, but should treat them as 32-bit registers. */ |
| |
| static int |
| mips2_fp_compat (void) |
| { |
| /* MIPS1 and MIPS2 have only 32 bit FPRs, and the FR bit is not |
| meaningful. */ |
| if (REGISTER_RAW_SIZE (FP0_REGNUM) == 4) |
| return 0; |
| |
| #if 0 |
| /* FIXME drow 2002-03-10: This is disabled until we can do it consistently, |
| in all the places we deal with FP registers. PR gdb/413. */ |
| /* Otherwise check the FR bit in the status register - it controls |
| the FP compatiblity mode. If it is clear we are in compatibility |
| mode. */ |
| if ((read_register (PS_REGNUM) & ST0_FR) == 0) |
| return 1; |
| #endif |
| |
| return 0; |
| } |
| |
| /* Indicate that the ABI makes use of double-precision registers |
| provided by the FPU (rather than combining pairs of registers to |
| form double-precision values). Do not use "TARGET_IS_MIPS64" to |
| determine if the ABI is using double-precision registers. See also |
| MIPS_FPU_TYPE. */ |
| #define FP_REGISTER_DOUBLE (gdbarch_tdep (current_gdbarch)->mips_fp_register_double) |
| |
| /* The amount of space reserved on the stack for registers. This is |
| different to MIPS_SAVED_REGSIZE as it determines the alignment of |
| data allocated after the registers have run out. */ |
| |
| #define MIPS_DEFAULT_STACK_ARGSIZE (gdbarch_tdep (current_gdbarch)->mips_default_stack_argsize) |
| |
| #define MIPS_STACK_ARGSIZE (mips_stack_argsize ()) |
| |
| static const char *mips_stack_argsize_string = size_auto; |
| |
| static unsigned int |
| mips_stack_argsize (void) |
| { |
| if (mips_stack_argsize_string == size_auto) |
| return MIPS_DEFAULT_STACK_ARGSIZE; |
| else if (mips_stack_argsize_string == size_64) |
| return 8; |
| else /* if (mips_stack_argsize_string == size_32) */ |
| return 4; |
| } |
| |
| #define GDB_TARGET_IS_MIPS64 (gdbarch_tdep (current_gdbarch)->gdb_target_is_mips64 + 0) |
| |
| #define MIPS_DEFAULT_MASK_ADDRESS_P (gdbarch_tdep (current_gdbarch)->default_mask_address_p) |
| |
| #define VM_MIN_ADDRESS (CORE_ADDR)0x400000 |
| |
| int gdb_print_insn_mips (bfd_vma, disassemble_info *); |
| |
| static void mips_print_register (int, int); |
| |
| static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR, |
| struct frame_info *, int); |
| |
| static CORE_ADDR heuristic_proc_start (CORE_ADDR); |
| |
| static CORE_ADDR read_next_frame_reg (struct frame_info *, int); |
| |
| static int mips_set_processor_type (char *); |
| |
| static void mips_show_processor_type_command (char *, int); |
| |
| static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *); |
| |
| static mips_extra_func_info_t find_proc_desc (CORE_ADDR pc, |
| struct frame_info *next_frame, |
| int cur_frame); |
| |
| static CORE_ADDR after_prologue (CORE_ADDR pc, |
| mips_extra_func_info_t proc_desc); |
| |
| static void mips_read_fp_register_single (int regno, char *rare_buffer); |
| static void mips_read_fp_register_double (int regno, char *rare_buffer); |
| |
| static struct type *mips_float_register_type (void); |
| static struct type *mips_double_register_type (void); |
| |
| /* This value is the model of MIPS in use. It is derived from the value |
| of the PrID register. */ |
| |
| char *mips_processor_type; |
| |
| char *tmp_mips_processor_type; |
| |
| /* The list of available "set mips " and "show mips " commands */ |
| |
| static struct cmd_list_element *setmipscmdlist = NULL; |
| static struct cmd_list_element *showmipscmdlist = NULL; |
| |
| /* A set of original names, to be used when restoring back to generic |
| registers from a specific set. */ |
| static char *mips_generic_reg_names[] = MIPS_REGISTER_NAMES; |
| |
| /* Integer registers 0 thru 31 are handled explicitly by |
| mips_register_name(). Processor specific registers 32 and above |
| are listed in the sets of register names assigned to |
| mips_processor_reg_names. */ |
| static char **mips_processor_reg_names = mips_generic_reg_names; |
| |
| /* Return the name of the register corresponding to REGNO. */ |
| static const char * |
| mips_register_name (int regno) |
| { |
| /* GPR names for all ABIs other than n32/n64. */ |
| static char *mips_gpr_names[] = { |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", |
| }; |
| |
| /* GPR names for n32 and n64 ABIs. */ |
| static char *mips_n32_n64_gpr_names[] = { |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" |
| }; |
| |
| enum mips_abi abi = mips_abi (current_gdbarch); |
| |
| /* The MIPS integer registers are always mapped from 0 to 31. The |
| names of the registers (which reflects the conventions regarding |
| register use) vary depending on the ABI. */ |
| if (0 <= regno && regno < 32) |
| { |
| if (abi == MIPS_ABI_N32 || abi == MIPS_ABI_N64) |
| return mips_n32_n64_gpr_names[regno]; |
| else |
| return mips_gpr_names[regno]; |
| } |
| else if (32 <= regno && regno < NUM_REGS) |
| return mips_processor_reg_names[regno - 32]; |
| else |
| internal_error (__FILE__, __LINE__, |
| "mips_register_name: bad register number %d", regno); |
| } |
| |
| /* *INDENT-OFF* */ |
| /* Names of IDT R3041 registers. */ |
| |
| char *mips_r3041_reg_names[] = { |
| "sr", "lo", "hi", "bad", "cause","pc", |
| "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", |
| "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", |
| "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", |
| "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", |
| "fsr", "fir", "",/*"fp"*/ "", |
| "", "", "bus", "ccfg", "", "", "", "", |
| "", "", "port", "cmp", "", "", "epc", "prid", |
| }; |
| |
| /* Names of IDT R3051 registers. */ |
| |
| char *mips_r3051_reg_names[] = { |
| "sr", "lo", "hi", "bad", "cause","pc", |
| "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", |
| "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", |
| "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", |
| "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", |
| "fsr", "fir", ""/*"fp"*/, "", |
| "inx", "rand", "elo", "", "ctxt", "", "", "", |
| "", "", "ehi", "", "", "", "epc", "prid", |
| }; |
| |
| /* Names of IDT R3081 registers. */ |
| |
| char *mips_r3081_reg_names[] = { |
| "sr", "lo", "hi", "bad", "cause","pc", |
| "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", |
| "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", |
| "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", |
| "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", |
| "fsr", "fir", ""/*"fp"*/, "", |
| "inx", "rand", "elo", "cfg", "ctxt", "", "", "", |
| "", "", "ehi", "", "", "", "epc", "prid", |
| }; |
| |
| /* Names of LSI 33k registers. */ |
| |
| char *mips_lsi33k_reg_names[] = { |
| "epc", "hi", "lo", "sr", "cause","badvaddr", |
| "dcic", "bpc", "bda", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| }; |
| |
| struct { |
| char *name; |
| char **regnames; |
| } mips_processor_type_table[] = { |
| { "generic", mips_generic_reg_names }, |
| { "r3041", mips_r3041_reg_names }, |
| { "r3051", mips_r3051_reg_names }, |
| { "r3071", mips_r3081_reg_names }, |
| { "r3081", mips_r3081_reg_names }, |
| { "lsi33k", mips_lsi33k_reg_names }, |
| { NULL, NULL } |
| }; |
| /* *INDENT-ON* */ |
| |
| |
| |
| |
| /* Table to translate MIPS16 register field to actual register number. */ |
| static int mips16_to_32_reg[8] = |
| {16, 17, 2, 3, 4, 5, 6, 7}; |
| |
| /* Heuristic_proc_start may hunt through the text section for a long |
| time across a 2400 baud serial line. Allows the user to limit this |
| search. */ |
| |
| static unsigned int heuristic_fence_post = 0; |
| |
| #define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */ |
| #define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */ |
| #define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset) |
| #define PROC_FRAME_REG(proc) ((proc)->pdr.framereg) |
| #define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust) |
| #define PROC_REG_MASK(proc) ((proc)->pdr.regmask) |
| #define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask) |
| #define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset) |
| #define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset) |
| #define PROC_PC_REG(proc) ((proc)->pdr.pcreg) |
| /* FIXME drow/2002-06-10: If a pointer on the host is bigger than a long, |
| this will corrupt pdr.iline. Fortunately we don't use it. */ |
| #define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym) |
| #define _PROC_MAGIC_ 0x0F0F0F0F |
| #define PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym == _PROC_MAGIC_) |
| #define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_) |
| |
| struct linked_proc_info |
| { |
| struct mips_extra_func_info info; |
| struct linked_proc_info *next; |
| } |
| *linked_proc_desc_table = NULL; |
| |
| void |
| mips_print_extra_frame_info (struct frame_info *fi) |
| { |
| if (fi |
| && get_frame_extra_info (fi) |
| && get_frame_extra_info (fi)->proc_desc |
| && get_frame_extra_info (fi)->proc_desc->pdr.framereg < NUM_REGS) |
| printf_filtered (" frame pointer is at %s+%s\n", |
| REGISTER_NAME (get_frame_extra_info (fi)->proc_desc->pdr.framereg), |
| paddr_d (get_frame_extra_info (fi)->proc_desc->pdr.frameoffset)); |
| } |
| |
| /* Number of bytes of storage in the actual machine representation for |
| register N. NOTE: This indirectly defines the register size |
| transfered by the GDB protocol. */ |
| |
| static int mips64_transfers_32bit_regs_p = 0; |
| |
| static int |
| mips_register_raw_size (int reg_nr) |
| { |
| if (mips64_transfers_32bit_regs_p) |
| return REGISTER_VIRTUAL_SIZE (reg_nr); |
| else if (reg_nr >= FP0_REGNUM && reg_nr < FP0_REGNUM + 32 |
| && FP_REGISTER_DOUBLE) |
| /* For MIPS_ABI_N32 (for example) we need 8 byte floating point |
| registers. */ |
| return 8; |
| else |
| return MIPS_REGSIZE; |
| } |
| |
| /* Convert between RAW and VIRTUAL registers. The RAW register size |
| defines the remote-gdb packet. */ |
| |
| static int |
| mips_register_convertible (int reg_nr) |
| { |
| if (mips64_transfers_32bit_regs_p) |
| return 0; |
| else |
| return (REGISTER_RAW_SIZE (reg_nr) > REGISTER_VIRTUAL_SIZE (reg_nr)); |
| } |
| |
| static void |
| mips_register_convert_to_virtual (int n, struct type *virtual_type, |
| char *raw_buf, char *virt_buf) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| memcpy (virt_buf, |
| raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)), |
| TYPE_LENGTH (virtual_type)); |
| else |
| memcpy (virt_buf, |
| raw_buf, |
| TYPE_LENGTH (virtual_type)); |
| } |
| |
| static void |
| mips_register_convert_to_raw (struct type *virtual_type, int n, |
| char *virt_buf, char *raw_buf) |
| { |
| memset (raw_buf, 0, REGISTER_RAW_SIZE (n)); |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| memcpy (raw_buf + (REGISTER_RAW_SIZE (n) - TYPE_LENGTH (virtual_type)), |
| virt_buf, |
| TYPE_LENGTH (virtual_type)); |
| else |
| memcpy (raw_buf, |
| virt_buf, |
| TYPE_LENGTH (virtual_type)); |
| } |
| |
| void |
| mips_register_convert_to_type (int regnum, struct type *type, char *buffer) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && REGISTER_RAW_SIZE (regnum) == 4 |
| && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32 |
| && TYPE_CODE(type) == TYPE_CODE_FLT |
| && TYPE_LENGTH(type) == 8) |
| { |
| char temp[4]; |
| memcpy (temp, ((char *)(buffer))+4, 4); |
| memcpy (((char *)(buffer))+4, (buffer), 4); |
| memcpy (((char *)(buffer)), temp, 4); |
| } |
| } |
| |
| void |
| mips_register_convert_from_type (int regnum, struct type *type, char *buffer) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && REGISTER_RAW_SIZE (regnum) == 4 |
| && (regnum) >= FP0_REGNUM && (regnum) < FP0_REGNUM + 32 |
| && TYPE_CODE(type) == TYPE_CODE_FLT |
| && TYPE_LENGTH(type) == 8) |
| { |
| char temp[4]; |
| memcpy (temp, ((char *)(buffer))+4, 4); |
| memcpy (((char *)(buffer))+4, (buffer), 4); |
| memcpy (((char *)(buffer)), temp, 4); |
| } |
| } |
| |
| /* Return the GDB type object for the "standard" data type |
| of data in register REG. |
| |
| Note: kevinb/2002-08-01: The definition below should faithfully |
| reproduce the behavior of each of the REGISTER_VIRTUAL_TYPE |
| definitions found in config/mips/tm-*.h. I'm concerned about |
| the ``FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM'' clause |
| though. In some cases FP_REGNUM is in this range, and I doubt |
| that this code is correct for the 64-bit case. */ |
| |
| static struct type * |
| mips_register_virtual_type (int reg) |
| { |
| if (FP0_REGNUM <= reg && reg < FP0_REGNUM + 32) |
| { |
| /* Floating point registers... */ |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| return builtin_type_ieee_double_big; |
| else |
| return builtin_type_ieee_double_little; |
| } |
| else if (reg == PS_REGNUM /* CR */) |
| return builtin_type_uint32; |
| else if (FCRCS_REGNUM <= reg && reg <= LAST_EMBED_REGNUM) |
| return builtin_type_uint32; |
| else |
| { |
| /* Everything else... |
| Return type appropriate for width of register. */ |
| if (MIPS_REGSIZE == TYPE_LENGTH (builtin_type_uint64)) |
| return builtin_type_uint64; |
| else |
| return builtin_type_uint32; |
| } |
| } |
| |
| /* TARGET_READ_SP -- Remove useless bits from the stack pointer. */ |
| |
| static CORE_ADDR |
| mips_read_sp (void) |
| { |
| return ADDR_BITS_REMOVE (read_register (SP_REGNUM)); |
| } |
| |
| /* Should the upper word of 64-bit addresses be zeroed? */ |
| enum auto_boolean mask_address_var = AUTO_BOOLEAN_AUTO; |
| |
| static int |
| mips_mask_address_p (void) |
| { |
| switch (mask_address_var) |
| { |
| case AUTO_BOOLEAN_TRUE: |
| return 1; |
| case AUTO_BOOLEAN_FALSE: |
| return 0; |
| break; |
| case AUTO_BOOLEAN_AUTO: |
| return MIPS_DEFAULT_MASK_ADDRESS_P; |
| default: |
| internal_error (__FILE__, __LINE__, |
| "mips_mask_address_p: bad switch"); |
| return -1; |
| } |
| } |
| |
| static void |
| show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c) |
| { |
| switch (mask_address_var) |
| { |
| case AUTO_BOOLEAN_TRUE: |
| printf_filtered ("The 32 bit mips address mask is enabled\n"); |
| break; |
| case AUTO_BOOLEAN_FALSE: |
| printf_filtered ("The 32 bit mips address mask is disabled\n"); |
| break; |
| case AUTO_BOOLEAN_AUTO: |
| printf_filtered ("The 32 bit address mask is set automatically. Currently %s\n", |
| mips_mask_address_p () ? "enabled" : "disabled"); |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, |
| "show_mask_address: bad switch"); |
| break; |
| } |
| } |
| |
| /* Should call_function allocate stack space for a struct return? */ |
| |
| static int |
| mips_eabi_use_struct_convention (int gcc_p, struct type *type) |
| { |
| return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE); |
| } |
| |
| static int |
| mips_n32n64_use_struct_convention (int gcc_p, struct type *type) |
| { |
| return (TYPE_LENGTH (type) > 2 * MIPS_SAVED_REGSIZE); |
| } |
| |
| static int |
| mips_o32_use_struct_convention (int gcc_p, struct type *type) |
| { |
| return 1; /* Structures are returned by ref in extra arg0. */ |
| } |
| |
| /* Should call_function pass struct by reference? |
| For each architecture, structs are passed either by |
| value or by reference, depending on their size. */ |
| |
| static int |
| mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type) |
| { |
| enum type_code typecode = TYPE_CODE (check_typedef (type)); |
| int len = TYPE_LENGTH (check_typedef (type)); |
| |
| if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION) |
| return (len > MIPS_SAVED_REGSIZE); |
| |
| return 0; |
| } |
| |
| static int |
| mips_n32n64_reg_struct_has_addr (int gcc_p, struct type *type) |
| { |
| return 0; /* Assumption: N32/N64 never passes struct by ref. */ |
| } |
| |
| static int |
| mips_o32_reg_struct_has_addr (int gcc_p, struct type *type) |
| { |
| return 0; /* Assumption: O32/O64 never passes struct by ref. */ |
| } |
| |
| /* Tell if the program counter value in MEMADDR is in a MIPS16 function. */ |
| |
| static int |
| pc_is_mips16 (bfd_vma memaddr) |
| { |
| struct minimal_symbol *sym; |
| |
| /* If bit 0 of the address is set, assume this is a MIPS16 address. */ |
| if (IS_MIPS16_ADDR (memaddr)) |
| return 1; |
| |
| /* A flag indicating that this is a MIPS16 function is stored by elfread.c in |
| the high bit of the info field. Use this to decide if the function is |
| MIPS16 or normal MIPS. */ |
| sym = lookup_minimal_symbol_by_pc (memaddr); |
| if (sym) |
| return msymbol_is_special (sym); |
| else |
| return 0; |
| } |
| |
| /* MIPS believes that the PC has a sign extended value. Perhaphs the |
| all registers should be sign extended for simplicity? */ |
| |
| static CORE_ADDR |
| mips_read_pc (ptid_t ptid) |
| { |
| return read_signed_register_pid (PC_REGNUM, ptid); |
| } |
| |
| /* This returns the PC of the first inst after the prologue. If we can't |
| find the prologue, then return 0. */ |
| |
| static CORE_ADDR |
| after_prologue (CORE_ADDR pc, |
| mips_extra_func_info_t proc_desc) |
| { |
| struct symtab_and_line sal; |
| CORE_ADDR func_addr, func_end; |
| |
| /* Pass cur_frame == 0 to find_proc_desc. We should not attempt |
| to read the stack pointer from the current machine state, because |
| the current machine state has nothing to do with the information |
| we need from the proc_desc; and the process may or may not exist |
| right now. */ |
| if (!proc_desc) |
| proc_desc = find_proc_desc (pc, NULL, 0); |
| |
| if (proc_desc) |
| { |
| /* If function is frameless, then we need to do it the hard way. I |
| strongly suspect that frameless always means prologueless... */ |
| if (PROC_FRAME_REG (proc_desc) == SP_REGNUM |
| && PROC_FRAME_OFFSET (proc_desc) == 0) |
| return 0; |
| } |
| |
| if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end)) |
| return 0; /* Unknown */ |
| |
| sal = find_pc_line (func_addr, 0); |
| |
| if (sal.end < func_end) |
| return sal.end; |
| |
| /* The line after the prologue is after the end of the function. In this |
| case, tell the caller to find the prologue the hard way. */ |
| |
| return 0; |
| } |
| |
| /* Decode a MIPS32 instruction that saves a register in the stack, and |
| set the appropriate bit in the general register mask or float register mask |
| to indicate which register is saved. This is a helper function |
| for mips_find_saved_regs. */ |
| |
| static void |
| mips32_decode_reg_save (t_inst inst, unsigned long *gen_mask, |
| unsigned long *float_mask) |
| { |
| int reg; |
| |
| if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */ |
| || (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */ |
| || (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */ |
| { |
| /* It might be possible to use the instruction to |
| find the offset, rather than the code below which |
| is based on things being in a certain order in the |
| frame, but figuring out what the instruction's offset |
| is relative to might be a little tricky. */ |
| reg = (inst & 0x001f0000) >> 16; |
| *gen_mask |= (1 << reg); |
| } |
| else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */ |
| || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */ |
| || (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */ |
| |
| { |
| reg = ((inst & 0x001f0000) >> 16); |
| *float_mask |= (1 << reg); |
| } |
| } |
| |
| /* Decode a MIPS16 instruction that saves a register in the stack, and |
| set the appropriate bit in the general register or float register mask |
| to indicate which register is saved. This is a helper function |
| for mips_find_saved_regs. */ |
| |
| static void |
| mips16_decode_reg_save (t_inst inst, unsigned long *gen_mask) |
| { |
| if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */ |
| { |
| int reg = mips16_to_32_reg[(inst & 0x700) >> 8]; |
| *gen_mask |= (1 << reg); |
| } |
| else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ |
| { |
| int reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; |
| *gen_mask |= (1 << reg); |
| } |
| else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */ |
| || (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ |
| *gen_mask |= (1 << RA_REGNUM); |
| } |
| |
| |
| /* Fetch and return instruction from the specified location. If the PC |
| is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */ |
| |
| static t_inst |
| mips_fetch_instruction (CORE_ADDR addr) |
| { |
| char buf[MIPS_INSTLEN]; |
| int instlen; |
| int status; |
| |
| if (pc_is_mips16 (addr)) |
| { |
| instlen = MIPS16_INSTLEN; |
| addr = UNMAKE_MIPS16_ADDR (addr); |
| } |
| else |
| instlen = MIPS_INSTLEN; |
| status = read_memory_nobpt (addr, buf, instlen); |
| if (status) |
| memory_error (status, addr); |
| return extract_unsigned_integer (buf, instlen); |
| } |
| |
| |
| /* These the fields of 32 bit mips instructions */ |
| #define mips32_op(x) (x >> 26) |
| #define itype_op(x) (x >> 26) |
| #define itype_rs(x) ((x >> 21) & 0x1f) |
| #define itype_rt(x) ((x >> 16) & 0x1f) |
| #define itype_immediate(x) (x & 0xffff) |
| |
| #define jtype_op(x) (x >> 26) |
| #define jtype_target(x) (x & 0x03ffffff) |
| |
| #define rtype_op(x) (x >> 26) |
| #define rtype_rs(x) ((x >> 21) & 0x1f) |
| #define rtype_rt(x) ((x >> 16) & 0x1f) |
| #define rtype_rd(x) ((x >> 11) & 0x1f) |
| #define rtype_shamt(x) ((x >> 6) & 0x1f) |
| #define rtype_funct(x) (x & 0x3f) |
| |
| static CORE_ADDR |
| mips32_relative_offset (unsigned long inst) |
| { |
| long x; |
| x = itype_immediate (inst); |
| if (x & 0x8000) /* sign bit set */ |
| { |
| x |= 0xffff0000; /* sign extension */ |
| } |
| x = x << 2; |
| return x; |
| } |
| |
| /* Determine whate to set a single step breakpoint while considering |
| branch prediction */ |
| static CORE_ADDR |
| mips32_next_pc (CORE_ADDR pc) |
| { |
| unsigned long inst; |
| int op; |
| inst = mips_fetch_instruction (pc); |
| if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch instruction */ |
| { |
| if (itype_op (inst) >> 2 == 5) |
| /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */ |
| { |
| op = (itype_op (inst) & 0x03); |
| switch (op) |
| { |
| case 0: /* BEQL */ |
| goto equal_branch; |
| case 1: /* BNEL */ |
| goto neq_branch; |
| case 2: /* BLEZL */ |
| goto less_branch; |
| case 3: /* BGTZ */ |
| goto greater_branch; |
| default: |
| pc += 4; |
| } |
| } |
| else if (itype_op (inst) == 17 && itype_rs (inst) == 8) |
| /* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */ |
| { |
| int tf = itype_rt (inst) & 0x01; |
| int cnum = itype_rt (inst) >> 2; |
| int fcrcs = read_signed_register (FCRCS_REGNUM); |
| int cond = ((fcrcs >> 24) & 0x0e) | ((fcrcs >> 23) & 0x01); |
| |
| if (((cond >> cnum) & 0x01) == tf) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; |
| } |
| else |
| pc += 4; /* Not a branch, next instruction is easy */ |
| } |
| else |
| { /* This gets way messy */ |
| |
| /* Further subdivide into SPECIAL, REGIMM and other */ |
| switch (op = itype_op (inst) & 0x07) /* extract bits 28,27,26 */ |
| { |
| case 0: /* SPECIAL */ |
| op = rtype_funct (inst); |
| switch (op) |
| { |
| case 8: /* JR */ |
| case 9: /* JALR */ |
| /* Set PC to that address */ |
| pc = read_signed_register (rtype_rs (inst)); |
| break; |
| default: |
| pc += 4; |
| } |
| |
| break; /* end SPECIAL */ |
| case 1: /* REGIMM */ |
| { |
| op = itype_rt (inst); /* branch condition */ |
| switch (op) |
| { |
| case 0: /* BLTZ */ |
| case 2: /* BLTZL */ |
| case 16: /* BLTZAL */ |
| case 18: /* BLTZALL */ |
| less_branch: |
| if (read_signed_register (itype_rs (inst)) < 0) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; /* after the delay slot */ |
| break; |
| case 1: /* BGEZ */ |
| case 3: /* BGEZL */ |
| case 17: /* BGEZAL */ |
| case 19: /* BGEZALL */ |
| greater_equal_branch: |
| if (read_signed_register (itype_rs (inst)) >= 0) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; /* after the delay slot */ |
| break; |
| /* All of the other instructions in the REGIMM category */ |
| default: |
| pc += 4; |
| } |
| } |
| break; /* end REGIMM */ |
| case 2: /* J */ |
| case 3: /* JAL */ |
| { |
| unsigned long reg; |
| reg = jtype_target (inst) << 2; |
| /* Upper four bits get never changed... */ |
| pc = reg + ((pc + 4) & 0xf0000000); |
| } |
| break; |
| /* FIXME case JALX : */ |
| { |
| unsigned long reg; |
| reg = jtype_target (inst) << 2; |
| pc = reg + ((pc + 4) & 0xf0000000) + 1; /* yes, +1 */ |
| /* Add 1 to indicate 16 bit mode - Invert ISA mode */ |
| } |
| break; /* The new PC will be alternate mode */ |
| case 4: /* BEQ, BEQL */ |
| equal_branch: |
| if (read_signed_register (itype_rs (inst)) == |
| read_signed_register (itype_rt (inst))) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; |
| break; |
| case 5: /* BNE, BNEL */ |
| neq_branch: |
| if (read_signed_register (itype_rs (inst)) != |
| read_signed_register (itype_rt (inst))) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; |
| break; |
| case 6: /* BLEZ, BLEZL */ |
| less_zero_branch: |
| if (read_signed_register (itype_rs (inst) <= 0)) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; |
| break; |
| case 7: |
| default: |
| greater_branch: /* BGTZ, BGTZL */ |
| if (read_signed_register (itype_rs (inst) > 0)) |
| pc += mips32_relative_offset (inst) + 4; |
| else |
| pc += 8; |
| break; |
| } /* switch */ |
| } /* else */ |
| return pc; |
| } /* mips32_next_pc */ |
| |
| /* Decoding the next place to set a breakpoint is irregular for the |
| mips 16 variant, but fortunately, there fewer instructions. We have to cope |
| ith extensions for 16 bit instructions and a pair of actual 32 bit instructions. |
| We dont want to set a single step instruction on the extend instruction |
| either. |
| */ |
| |
| /* Lots of mips16 instruction formats */ |
| /* Predicting jumps requires itype,ritype,i8type |
| and their extensions extItype,extritype,extI8type |
| */ |
| enum mips16_inst_fmts |
| { |
| itype, /* 0 immediate 5,10 */ |
| ritype, /* 1 5,3,8 */ |
| rrtype, /* 2 5,3,3,5 */ |
| rritype, /* 3 5,3,3,5 */ |
| rrrtype, /* 4 5,3,3,3,2 */ |
| rriatype, /* 5 5,3,3,1,4 */ |
| shifttype, /* 6 5,3,3,3,2 */ |
| i8type, /* 7 5,3,8 */ |
| i8movtype, /* 8 5,3,3,5 */ |
| i8mov32rtype, /* 9 5,3,5,3 */ |
| i64type, /* 10 5,3,8 */ |
| ri64type, /* 11 5,3,3,5 */ |
| jalxtype, /* 12 5,1,5,5,16 - a 32 bit instruction */ |
| exiItype, /* 13 5,6,5,5,1,1,1,1,1,1,5 */ |
| extRitype, /* 14 5,6,5,5,3,1,1,1,5 */ |
| extRRItype, /* 15 5,5,5,5,3,3,5 */ |
| extRRIAtype, /* 16 5,7,4,5,3,3,1,4 */ |
| EXTshifttype, /* 17 5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */ |
| extI8type, /* 18 5,6,5,5,3,1,1,1,5 */ |
| extI64type, /* 19 5,6,5,5,3,1,1,1,5 */ |
| extRi64type, /* 20 5,6,5,5,3,3,5 */ |
| extshift64type /* 21 5,5,1,1,1,1,1,1,5,1,1,1,3,5 */ |
| }; |
| /* I am heaping all the fields of the formats into one structure and |
| then, only the fields which are involved in instruction extension */ |
| struct upk_mips16 |
| { |
| CORE_ADDR offset; |
| unsigned int regx; /* Function in i8 type */ |
| unsigned int regy; |
| }; |
| |
| |
| /* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same format |
| for the bits which make up the immediatate extension. */ |
| |
| static CORE_ADDR |
| extended_offset (unsigned int extension) |
| { |
| CORE_ADDR value; |
| value = (extension >> 21) & 0x3f; /* * extract 15:11 */ |
| value = value << 6; |
| value |= (extension >> 16) & 0x1f; /* extrace 10:5 */ |
| value = value << 5; |
| value |= extension & 0x01f; /* extract 4:0 */ |
| return value; |
| } |
| |
| /* Only call this function if you know that this is an extendable |
| instruction, It wont malfunction, but why make excess remote memory references? |
| If the immediate operands get sign extended or somthing, do it after |
| the extension is performed. |
| */ |
| /* FIXME: Every one of these cases needs to worry about sign extension |
| when the offset is to be used in relative addressing */ |
| |
| |
| static unsigned int |
| fetch_mips_16 (CORE_ADDR pc) |
| { |
| char buf[8]; |
| pc &= 0xfffffffe; /* clear the low order bit */ |
| target_read_memory (pc, buf, 2); |
| return extract_unsigned_integer (buf, 2); |
| } |
| |
| static void |
| unpack_mips16 (CORE_ADDR pc, |
| unsigned int extension, |
| unsigned int inst, |
| enum mips16_inst_fmts insn_format, |
| struct upk_mips16 *upk) |
| { |
| CORE_ADDR offset; |
| int regx; |
| int regy; |
| switch (insn_format) |
| { |
| case itype: |
| { |
| CORE_ADDR value; |
| if (extension) |
| { |
| value = extended_offset (extension); |
| value = value << 11; /* rom for the original value */ |
| value |= inst & 0x7ff; /* eleven bits from instruction */ |
| } |
| else |
| { |
| value = inst & 0x7ff; |
| /* FIXME : Consider sign extension */ |
| } |
| offset = value; |
| regx = -1; |
| regy = -1; |
| } |
| break; |
| case ritype: |
| case i8type: |
| { /* A register identifier and an offset */ |
| /* Most of the fields are the same as I type but the |
| immediate value is of a different length */ |
| CORE_ADDR value; |
| if (extension) |
| { |
| value = extended_offset (extension); |
| value = value << 8; /* from the original instruction */ |
| value |= inst & 0xff; /* eleven bits from instruction */ |
| regx = (extension >> 8) & 0x07; /* or i8 funct */ |
| if (value & 0x4000) /* test the sign bit , bit 26 */ |
| { |
| value &= ~0x3fff; /* remove the sign bit */ |
| value = -value; |
| } |
| } |
| else |
| { |
| value = inst & 0xff; /* 8 bits */ |
| regx = (inst >> 8) & 0x07; /* or i8 funct */ |
| /* FIXME: Do sign extension , this format needs it */ |
| if (value & 0x80) /* THIS CONFUSES ME */ |
| { |
| value &= 0xef; /* remove the sign bit */ |
| value = -value; |
| } |
| } |
| offset = value; |
| regy = -1; |
| break; |
| } |
| case jalxtype: |
| { |
| unsigned long value; |
| unsigned int nexthalf; |
| value = ((inst & 0x1f) << 5) | ((inst >> 5) & 0x1f); |
| value = value << 16; |
| nexthalf = mips_fetch_instruction (pc + 2); /* low bit still set */ |
| value |= nexthalf; |
| offset = value; |
| regx = -1; |
| regy = -1; |
| break; |
| } |
| default: |
| internal_error (__FILE__, __LINE__, |
| "bad switch"); |
| } |
| upk->offset = offset; |
| upk->regx = regx; |
| upk->regy = regy; |
| } |
| |
| |
| static CORE_ADDR |
| add_offset_16 (CORE_ADDR pc, int offset) |
| { |
| return ((offset << 2) | ((pc + 2) & (0xf0000000))); |
| } |
| |
| static CORE_ADDR |
| extended_mips16_next_pc (CORE_ADDR pc, |
| unsigned int extension, |
| unsigned int insn) |
| { |
| int op = (insn >> 11); |
| switch (op) |
| { |
| case 2: /* Branch */ |
| { |
| CORE_ADDR offset; |
| struct upk_mips16 upk; |
| unpack_mips16 (pc, extension, insn, itype, &upk); |
| offset = upk.offset; |
| if (offset & 0x800) |
| { |
| offset &= 0xeff; |
| offset = -offset; |
| } |
| pc += (offset << 1) + 2; |
| break; |
| } |
| case 3: /* JAL , JALX - Watch out, these are 32 bit instruction */ |
| { |
| struct upk_mips16 upk; |
| unpack_mips16 (pc, extension, insn, jalxtype, &upk); |
| pc = add_offset_16 (pc, upk.offset); |
| if ((insn >> 10) & 0x01) /* Exchange mode */ |
| pc = pc & ~0x01; /* Clear low bit, indicate 32 bit mode */ |
| else |
| pc |= 0x01; |
| break; |
| } |
| case 4: /* beqz */ |
| { |
| struct upk_mips16 upk; |
| int reg; |
| unpack_mips16 (pc, extension, insn, ritype, &upk); |
| reg = read_signed_register (upk.regx); |
| if (reg == 0) |
| pc += (upk.offset << 1) + 2; |
| else |
| pc += 2; |
| break; |
| } |
| case 5: /* bnez */ |
| { |
| struct upk_mips16 upk; |
| int reg; |
| unpack_mips16 (pc, extension, insn, ritype, &upk); |
| reg = read_signed_register (upk.regx); |
| if (reg != 0) |
| pc += (upk.offset << 1) + 2; |
| else |
| pc += 2; |
| break; |
| } |
| case 12: /* I8 Formats btez btnez */ |
| { |
| struct upk_mips16 upk; |
| int reg; |
| unpack_mips16 (pc, extension, insn, i8type, &upk); |
| /* upk.regx contains the opcode */ |
| reg = read_signed_register (24); /* Test register is 24 */ |
| if (((upk.regx == 0) && (reg == 0)) /* BTEZ */ |
| || ((upk.regx == 1) && (reg != 0))) /* BTNEZ */ |
| /* pc = add_offset_16(pc,upk.offset) ; */ |
| pc += (upk.offset << 1) + 2; |
| else |
| pc += 2; |
| break; |
| } |
| case 29: /* RR Formats JR, JALR, JALR-RA */ |
| { |
| struct upk_mips16 upk; |
| /* upk.fmt = rrtype; */ |
| op = insn & 0x1f; |
| if (op == 0) |
| { |
| int reg; |
| upk.regx = (insn >> 8) & 0x07; |
| upk.regy = (insn >> 5) & 0x07; |
| switch (upk.regy) |
| { |
| case 0: |
| reg = upk.regx; |
| break; |
| case 1: |
| reg = 31; |
| break; /* Function return instruction */ |
| case 2: |
| reg = upk.regx; |
| break; |
| default: |
| reg = 31; |
| break; /* BOGUS Guess */ |
| } |
| pc = read_signed_register (reg); |
| } |
| else |
| pc += 2; |
| break; |
| } |
| case 30: |
| /* This is an instruction extension. Fetch the real instruction |
| (which follows the extension) and decode things based on |
| that. */ |
| { |
| pc += 2; |
| pc = extended_mips16_next_pc (pc, insn, fetch_mips_16 (pc)); |
| break; |
| } |
| default: |
| { |
| pc += 2; |
| break; |
| } |
| } |
| return pc; |
| } |
| |
| static CORE_ADDR |
| mips16_next_pc (CORE_ADDR pc) |
| { |
| unsigned int insn = fetch_mips_16 (pc); |
| return extended_mips16_next_pc (pc, 0, insn); |
| } |
| |
| /* The mips_next_pc function supports single_step when the remote |
| target monitor or stub is not developed enough to do a single_step. |
| It works by decoding the current instruction and predicting where a |
| branch will go. This isnt hard because all the data is available. |
| The MIPS32 and MIPS16 variants are quite different */ |
| CORE_ADDR |
| mips_next_pc (CORE_ADDR pc) |
| { |
| if (pc & 0x01) |
| return mips16_next_pc (pc); |
| else |
| return mips32_next_pc (pc); |
| } |
| |
| /* Guaranteed to set fci->saved_regs to some values (it never leaves it |
| NULL). |
| |
| Note: kevinb/2002-08-09: The only caller of this function is (and |
| should remain) mips_frame_init_saved_regs(). In fact, |
| aside from calling mips_find_saved_regs(), mips_frame_init_saved_regs() |
| does nothing more than set frame->saved_regs[SP_REGNUM]. These two |
| functions should really be combined and now that there is only one |
| caller, it should be straightforward. (Watch out for multiple returns |
| though.) */ |
| |
| static void |
| mips_find_saved_regs (struct frame_info *fci) |
| { |
| int ireg; |
| CORE_ADDR reg_position; |
| /* r0 bit means kernel trap */ |
| int kernel_trap; |
| /* What registers have been saved? Bitmasks. */ |
| unsigned long gen_mask, float_mask; |
| mips_extra_func_info_t proc_desc; |
| t_inst inst; |
| |
| frame_saved_regs_zalloc (fci); |
| |
| /* If it is the frame for sigtramp, the saved registers are located |
| in a sigcontext structure somewhere on the stack. |
| If the stack layout for sigtramp changes we might have to change these |
| constants and the companion fixup_sigtramp in mdebugread.c */ |
| #ifndef SIGFRAME_BASE |
| /* To satisfy alignment restrictions, sigcontext is located 4 bytes |
| above the sigtramp frame. */ |
| #define SIGFRAME_BASE MIPS_REGSIZE |
| /* FIXME! Are these correct?? */ |
| #define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * MIPS_REGSIZE) |
| #define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * MIPS_REGSIZE) |
| #define SIGFRAME_FPREGSAVE_OFF \ |
| (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE) |
| #endif |
| #ifndef SIGFRAME_REG_SIZE |
| /* FIXME! Is this correct?? */ |
| #define SIGFRAME_REG_SIZE MIPS_REGSIZE |
| #endif |
| if ((get_frame_type (fci) == SIGTRAMP_FRAME)) |
| { |
| for (ireg = 0; ireg < MIPS_NUMREGS; ireg++) |
| { |
| reg_position = get_frame_base (fci) + SIGFRAME_REGSAVE_OFF |
| + ireg * SIGFRAME_REG_SIZE; |
| get_frame_saved_regs (fci)[ireg] = reg_position; |
| } |
| for (ireg = 0; ireg < MIPS_NUMREGS; ireg++) |
| { |
| reg_position = get_frame_base (fci) + SIGFRAME_FPREGSAVE_OFF |
| + ireg * SIGFRAME_REG_SIZE; |
| get_frame_saved_regs (fci)[FP0_REGNUM + ireg] = reg_position; |
| } |
| get_frame_saved_regs (fci)[PC_REGNUM] = get_frame_base (fci) + SIGFRAME_PC_OFF; |
| return; |
| } |
| |
| proc_desc = get_frame_extra_info (fci)->proc_desc; |
| if (proc_desc == NULL) |
| /* I'm not sure how/whether this can happen. Normally when we can't |
| find a proc_desc, we "synthesize" one using heuristic_proc_desc |
| and set the saved_regs right away. */ |
| return; |
| |
| kernel_trap = PROC_REG_MASK (proc_desc) & 1; |
| gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc); |
| float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc); |
| |
| if ( /* In any frame other than the innermost or a frame interrupted by |
| a signal, we assume that all registers have been saved. |
| This assumes that all register saves in a function happen before |
| the first function call. */ |
| (get_next_frame (fci) == NULL |
| || (get_frame_type (get_next_frame (fci)) == SIGTRAMP_FRAME)) |
| |
| /* In a dummy frame we know exactly where things are saved. */ |
| && !PROC_DESC_IS_DUMMY (proc_desc) |
| |
| /* Don't bother unless we are inside a function prologue. Outside the |
| prologue, we know where everything is. */ |
| |
| && in_prologue (get_frame_pc (fci), PROC_LOW_ADDR (proc_desc)) |
| |
| /* Not sure exactly what kernel_trap means, but if it means |
| the kernel saves the registers without a prologue doing it, |
| we better not examine the prologue to see whether registers |
| have been saved yet. */ |
| && !kernel_trap) |
| { |
| /* We need to figure out whether the registers that the proc_desc |
| claims are saved have been saved yet. */ |
| |
| CORE_ADDR addr; |
| |
| /* Bitmasks; set if we have found a save for the register. */ |
| unsigned long gen_save_found = 0; |
| unsigned long float_save_found = 0; |
| int instlen; |
| |
| /* If the address is odd, assume this is MIPS16 code. */ |
| addr = PROC_LOW_ADDR (proc_desc); |
| instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN; |
| |
| /* Scan through this function's instructions preceding the current |
| PC, and look for those that save registers. */ |
| while (addr < get_frame_pc (fci)) |
| { |
| inst = mips_fetch_instruction (addr); |
| if (pc_is_mips16 (addr)) |
| mips16_decode_reg_save (inst, &gen_save_found); |
| else |
| mips32_decode_reg_save (inst, &gen_save_found, &float_save_found); |
| addr += instlen; |
| } |
| gen_mask = gen_save_found; |
| float_mask = float_save_found; |
| } |
| |
| /* Fill in the offsets for the registers which gen_mask says |
| were saved. */ |
| reg_position = get_frame_base (fci) + PROC_REG_OFFSET (proc_desc); |
| for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1) |
| if (gen_mask & 0x80000000) |
| { |
| get_frame_saved_regs (fci)[ireg] = reg_position; |
| reg_position -= MIPS_SAVED_REGSIZE; |
| } |
| |
| /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order |
| of that normally used by gcc. Therefore, we have to fetch the first |
| instruction of the function, and if it's an entry instruction that |
| saves $s0 or $s1, correct their saved addresses. */ |
| if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc))) |
| { |
| inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc)); |
| if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ |
| { |
| int reg; |
| int sreg_count = (inst >> 6) & 3; |
| |
| /* Check if the ra register was pushed on the stack. */ |
| reg_position = get_frame_base (fci) + PROC_REG_OFFSET (proc_desc); |
| if (inst & 0x20) |
| reg_position -= MIPS_SAVED_REGSIZE; |
| |
| /* Check if the s0 and s1 registers were pushed on the stack. */ |
| for (reg = 16; reg < sreg_count + 16; reg++) |
| { |
| get_frame_saved_regs (fci)[reg] = reg_position; |
| reg_position -= MIPS_SAVED_REGSIZE; |
| } |
| } |
| } |
| |
| /* Fill in the offsets for the registers which float_mask says |
| were saved. */ |
| reg_position = get_frame_base (fci) + PROC_FREG_OFFSET (proc_desc); |
| |
| /* Apparently, the freg_offset gives the offset to the first 64 bit |
| saved. |
| |
| When the ABI specifies 64 bit saved registers, the FREG_OFFSET |
| designates the first saved 64 bit register. |
| |
| When the ABI specifies 32 bit saved registers, the ``64 bit saved |
| DOUBLE'' consists of two adjacent 32 bit registers, Hence |
| FREG_OFFSET, designates the address of the lower register of the |
| register pair. Adjust the offset so that it designates the upper |
| register of the pair -- i.e., the address of the first saved 32 |
| bit register. */ |
| |
| if (MIPS_SAVED_REGSIZE == 4) |
| reg_position += MIPS_SAVED_REGSIZE; |
| |
| /* Fill in the offsets for the float registers which float_mask says |
| were saved. */ |
| for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1) |
| if (float_mask & 0x80000000) |
| { |
| get_frame_saved_regs (fci)[FP0_REGNUM + ireg] = reg_position; |
| reg_position -= MIPS_SAVED_REGSIZE; |
| } |
| |
| get_frame_saved_regs (fci)[PC_REGNUM] = get_frame_saved_regs (fci)[RA_REGNUM]; |
| } |
| |
| /* Set up the 'saved_regs' array. This is a data structure containing |
| the addresses on the stack where each register has been saved, for |
| each stack frame. Registers that have not been saved will have |
| zero here. The stack pointer register is special: rather than the |
| address where the stack register has been saved, saved_regs[SP_REGNUM] |
| will have the actual value of the previous frame's stack register. */ |
| |
| static void |
| mips_frame_init_saved_regs (struct frame_info *frame) |
| { |
| if (get_frame_saved_regs (frame) == NULL) |
| { |
| mips_find_saved_regs (frame); |
| } |
| get_frame_saved_regs (frame)[SP_REGNUM] = get_frame_base (frame); |
| } |
| |
| static CORE_ADDR |
| read_next_frame_reg (struct frame_info *fi, int regno) |
| { |
| int optimized; |
| CORE_ADDR addr; |
| int realnum; |
| enum lval_type lval; |
| void *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| |
| if (fi == NULL) |
| { |
| regcache_cooked_read (current_regcache, regno, raw_buffer); |
| } |
| else |
| { |
| frame_register_unwind (fi, regno, &optimized, &lval, &addr, &realnum, |
| raw_buffer); |
| /* FIXME: cagney/2002-09-13: This is just soooo bad. The MIPS |
| should have a pseudo register range that correspons to the ABI's, |
| rather than the ISA's, view of registers. These registers would |
| then implicitly describe their size and hence could be used |
| without the below munging. */ |
| if (lval == lval_memory) |
| { |
| if (regno < 32) |
| { |
| /* Only MIPS_SAVED_REGSIZE bytes of GP registers are |
| saved. */ |
| return read_memory_integer (addr, MIPS_SAVED_REGSIZE); |
| } |
| } |
| } |
| |
| return extract_signed_integer (raw_buffer, REGISTER_VIRTUAL_SIZE (regno)); |
| } |
| |
| /* mips_addr_bits_remove - remove useless address bits */ |
| |
| static CORE_ADDR |
| mips_addr_bits_remove (CORE_ADDR addr) |
| { |
| if (GDB_TARGET_IS_MIPS64) |
| { |
| if (mips_mask_address_p () && (addr >> 32 == (CORE_ADDR) 0xffffffff)) |
| { |
| /* This hack is a work-around for existing boards using |
| PMON, the simulator, and any other 64-bit targets that |
| doesn't have true 64-bit addressing. On these targets, |
| the upper 32 bits of addresses are ignored by the |
| hardware. Thus, the PC or SP are likely to have been |
| sign extended to all 1s by instruction sequences that |
| load 32-bit addresses. For example, a typical piece of |
| code that loads an address is this: |
| lui $r2, <upper 16 bits> |
| ori $r2, <lower 16 bits> |
| But the lui sign-extends the value such that the upper 32 |
| bits may be all 1s. The workaround is simply to mask off |
| these bits. In the future, gcc may be changed to support |
| true 64-bit addressing, and this masking will have to be |
| disabled. */ |
| addr &= (CORE_ADDR) 0xffffffff; |
| } |
| } |
| else if (mips_mask_address_p ()) |
| { |
| /* FIXME: This is wrong! mips_addr_bits_remove() shouldn't be |
| masking off bits, instead, the actual target should be asking |
| for the address to be converted to a valid pointer. */ |
| /* Even when GDB is configured for some 32-bit targets |
| (e.g. mips-elf), BFD is configured to handle 64-bit targets, |
| so CORE_ADDR is 64 bits. So we still have to mask off |
| useless bits from addresses. */ |
| addr &= (CORE_ADDR) 0xffffffff; |
| } |
| return addr; |
| } |
| |
| /* mips_software_single_step() is called just before we want to resume |
| the inferior, if we want to single-step it but there is no hardware |
| or kernel single-step support (MIPS on GNU/Linux for example). We find |
| the target of the coming instruction and breakpoint it. |
| |
| single_step is also called just after the inferior stops. If we had |
| set up a simulated single-step, we undo our damage. */ |
| |
| void |
| mips_software_single_step (enum target_signal sig, int insert_breakpoints_p) |
| { |
| static CORE_ADDR next_pc; |
| typedef char binsn_quantum[BREAKPOINT_MAX]; |
| static binsn_quantum break_mem; |
| CORE_ADDR pc; |
| |
| if (insert_breakpoints_p) |
| { |
| pc = read_register (PC_REGNUM); |
| next_pc = mips_next_pc (pc); |
| |
| target_insert_breakpoint (next_pc, break_mem); |
| } |
| else |
| target_remove_breakpoint (next_pc, break_mem); |
| } |
| |
| static CORE_ADDR |
| mips_init_frame_pc_first (int fromleaf, struct frame_info *prev) |
| { |
| CORE_ADDR pc, tmp; |
| |
| pc = ((fromleaf) |
| ? SAVED_PC_AFTER_CALL (get_next_frame (prev)) |
| : get_next_frame (prev) |
| ? DEPRECATED_FRAME_SAVED_PC (get_next_frame (prev)) |
| : read_pc ()); |
| tmp = SKIP_TRAMPOLINE_CODE (pc); |
| return tmp ? tmp : pc; |
| } |
| |
| |
| static CORE_ADDR |
| mips_frame_saved_pc (struct frame_info *frame) |
| { |
| CORE_ADDR saved_pc; |
| mips_extra_func_info_t proc_desc = get_frame_extra_info (frame)->proc_desc; |
| /* We have to get the saved pc from the sigcontext |
| if it is a signal handler frame. */ |
| int pcreg = (get_frame_type (frame) == SIGTRAMP_FRAME) ? PC_REGNUM |
| : (proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM); |
| |
| if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0)) |
| { |
| LONGEST tmp; |
| frame_unwind_signed_register (frame, PC_REGNUM, &tmp); |
| saved_pc = tmp; |
| } |
| else if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc)) |
| saved_pc = read_memory_integer (get_frame_base (frame) - MIPS_SAVED_REGSIZE, MIPS_SAVED_REGSIZE); |
| else |
| saved_pc = read_next_frame_reg (frame, pcreg); |
| |
| return ADDR_BITS_REMOVE (saved_pc); |
| } |
| |
| static struct mips_extra_func_info temp_proc_desc; |
| |
| /* This hack will go away once the get_prev_frame() code has been |
| modified to set the frame's type first. That is BEFORE init extra |
| frame info et.al. is called. This is because it will become |
| possible to skip the init extra info call for sigtramp and dummy |
| frames. */ |
| static CORE_ADDR *temp_saved_regs; |
| |
| /* Set a register's saved stack address in temp_saved_regs. If an address |
| has already been set for this register, do nothing; this way we will |
| only recognize the first save of a given register in a function prologue. |
| This is a helper function for mips{16,32}_heuristic_proc_desc. */ |
| |
| static void |
| set_reg_offset (int regno, CORE_ADDR offset) |
| { |
| if (temp_saved_regs[regno] == 0) |
| temp_saved_regs[regno] = offset; |
| } |
| |
| |
| /* Test whether the PC points to the return instruction at the |
| end of a function. */ |
| |
| static int |
| mips_about_to_return (CORE_ADDR pc) |
| { |
| if (pc_is_mips16 (pc)) |
| /* This mips16 case isn't necessarily reliable. Sometimes the compiler |
| generates a "jr $ra"; other times it generates code to load |
| the return address from the stack to an accessible register (such |
| as $a3), then a "jr" using that register. This second case |
| is almost impossible to distinguish from an indirect jump |
| used for switch statements, so we don't even try. */ |
| return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */ |
| else |
| return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */ |
| } |
| |
| |
| /* This fencepost looks highly suspicious to me. Removing it also |
| seems suspicious as it could affect remote debugging across serial |
| lines. */ |
| |
| static CORE_ADDR |
| heuristic_proc_start (CORE_ADDR pc) |
| { |
| CORE_ADDR start_pc; |
| CORE_ADDR fence; |
| int instlen; |
| int seen_adjsp = 0; |
| |
| pc = ADDR_BITS_REMOVE (pc); |
| start_pc = pc; |
| fence = start_pc - heuristic_fence_post; |
| if (start_pc == 0) |
| return 0; |
| |
| if (heuristic_fence_post == UINT_MAX |
| || fence < VM_MIN_ADDRESS) |
| fence = VM_MIN_ADDRESS; |
| |
| instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN; |
| |
| /* search back for previous return */ |
| for (start_pc -= instlen;; start_pc -= instlen) |
| if (start_pc < fence) |
| { |
| /* It's not clear to me why we reach this point when |
| stop_soon_quietly, but with this test, at least we |
| don't print out warnings for every child forked (eg, on |
| decstation). 22apr93 rich@cygnus.com. */ |
| if (!stop_soon_quietly) |
| { |
| static int blurb_printed = 0; |
| |
| warning ("Warning: GDB can't find the start of the function at 0x%s.", |
| paddr_nz (pc)); |
| |
| if (!blurb_printed) |
| { |
| /* This actually happens frequently in embedded |
| development, when you first connect to a board |
| and your stack pointer and pc are nowhere in |
| particular. This message needs to give people |
| in that situation enough information to |
| determine that it's no big deal. */ |
| printf_filtered ("\n\ |
| GDB is unable to find the start of the function at 0x%s\n\ |
| and thus can't determine the size of that function's stack frame.\n\ |
| This means that GDB may be unable to access that stack frame, or\n\ |
| the frames below it.\n\ |
| This problem is most likely caused by an invalid program counter or\n\ |
| stack pointer.\n\ |
| However, if you think GDB should simply search farther back\n\ |
| from 0x%s for code which looks like the beginning of a\n\ |
| function, you can increase the range of the search using the `set\n\ |
| heuristic-fence-post' command.\n", |
| paddr_nz (pc), paddr_nz (pc)); |
| blurb_printed = 1; |
| } |
| } |
| |
| return 0; |
| } |
| else if (pc_is_mips16 (start_pc)) |
| { |
| unsigned short inst; |
| |
| /* On MIPS16, any one of the following is likely to be the |
| start of a function: |
| entry |
| addiu sp,-n |
| daddiu sp,-n |
| extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */ |
| inst = mips_fetch_instruction (start_pc); |
| if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ |
| || (inst & 0xff80) == 0x6380 /* addiu sp,-n */ |
| || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */ |
| || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */ |
| break; |
| else if ((inst & 0xff00) == 0x6300 /* addiu sp */ |
| || (inst & 0xff00) == 0xfb00) /* daddiu sp */ |
| seen_adjsp = 1; |
| else |
| seen_adjsp = 0; |
| } |
| else if (mips_about_to_return (start_pc)) |
| { |
| start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */ |
| break; |
| } |
| |
| return start_pc; |
| } |
| |
| /* Fetch the immediate value from a MIPS16 instruction. |
| If the previous instruction was an EXTEND, use it to extend |
| the upper bits of the immediate value. This is a helper function |
| for mips16_heuristic_proc_desc. */ |
| |
| static int |
| mips16_get_imm (unsigned short prev_inst, /* previous instruction */ |
| unsigned short inst, /* current instruction */ |
| int nbits, /* number of bits in imm field */ |
| int scale, /* scale factor to be applied to imm */ |
| int is_signed) /* is the imm field signed? */ |
| { |
| int offset; |
| |
| if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */ |
| { |
| offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0); |
| if (offset & 0x8000) /* check for negative extend */ |
| offset = 0 - (0x10000 - (offset & 0xffff)); |
| return offset | (inst & 0x1f); |
| } |
| else |
| { |
| int max_imm = 1 << nbits; |
| int mask = max_imm - 1; |
| int sign_bit = max_imm >> 1; |
| |
| offset = inst & mask; |
| if (is_signed && (offset & sign_bit)) |
| offset = 0 - (max_imm - offset); |
| return offset * scale; |
| } |
| } |
| |
| |
| /* Fill in values in temp_proc_desc based on the MIPS16 instruction |
| stream from start_pc to limit_pc. */ |
| |
| static void |
| mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, |
| struct frame_info *next_frame, CORE_ADDR sp) |
| { |
| CORE_ADDR cur_pc; |
| CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */ |
| unsigned short prev_inst = 0; /* saved copy of previous instruction */ |
| unsigned inst = 0; /* current instruction */ |
| unsigned entry_inst = 0; /* the entry instruction */ |
| int reg, offset; |
| |
| PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */ |
| PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */ |
| |
| for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN) |
| { |
| /* Save the previous instruction. If it's an EXTEND, we'll extract |
| the immediate offset extension from it in mips16_get_imm. */ |
| prev_inst = inst; |
| |
| /* Fetch and decode the instruction. */ |
| inst = (unsigned short) mips_fetch_instruction (cur_pc); |
| if ((inst & 0xff00) == 0x6300 /* addiu sp */ |
| || (inst & 0xff00) == 0xfb00) /* daddiu sp */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 8, 8, 1); |
| if (offset < 0) /* negative stack adjustment? */ |
| PROC_FRAME_OFFSET (&temp_proc_desc) -= offset; |
| else |
| /* Exit loop if a positive stack adjustment is found, which |
| usually means that the stack cleanup code in the function |
| epilogue is reached. */ |
| break; |
| } |
| else if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); |
| reg = mips16_to_32_reg[(inst & 0x700) >> 8]; |
| PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); |
| set_reg_offset (reg, sp + offset); |
| } |
| else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); |
| reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; |
| PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); |
| set_reg_offset (reg, sp + offset); |
| } |
| else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); |
| PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); |
| set_reg_offset (RA_REGNUM, sp + offset); |
| } |
| else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 8, 8, 0); |
| PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); |
| set_reg_offset (RA_REGNUM, sp + offset); |
| } |
| else if (inst == 0x673d) /* move $s1, $sp */ |
| { |
| frame_addr = sp; |
| PROC_FRAME_REG (&temp_proc_desc) = 17; |
| } |
| else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); |
| frame_addr = sp + offset; |
| PROC_FRAME_REG (&temp_proc_desc) = 17; |
| PROC_FRAME_ADJUST (&temp_proc_desc) = offset; |
| } |
| else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 5, 4, 0); |
| reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, frame_addr + offset); |
| } |
| else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */ |
| { |
| offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); |
| reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, frame_addr + offset); |
| } |
| else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ |
| entry_inst = inst; /* save for later processing */ |
| else if ((inst & 0xf800) == 0x1800) /* jal(x) */ |
| cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */ |
| } |
| |
| /* The entry instruction is typically the first instruction in a function, |
| and it stores registers at offsets relative to the value of the old SP |
| (before the prologue). But the value of the sp parameter to this |
| function is the new SP (after the prologue has been executed). So we |
| can't calculate those offsets until we've seen the entire prologue, |
| and can calculate what the old SP must have been. */ |
| if (entry_inst != 0) |
| { |
| int areg_count = (entry_inst >> 8) & 7; |
| int sreg_count = (entry_inst >> 6) & 3; |
| |
| /* The entry instruction always subtracts 32 from the SP. */ |
| PROC_FRAME_OFFSET (&temp_proc_desc) += 32; |
| |
| /* Now we can calculate what the SP must have been at the |
| start of the function prologue. */ |
| sp += PROC_FRAME_OFFSET (&temp_proc_desc); |
| |
| /* Check if a0-a3 were saved in the caller's argument save area. */ |
| for (reg = 4, offset = 0; reg < areg_count + 4; reg++) |
| { |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, sp + offset); |
| offset += MIPS_SAVED_REGSIZE; |
| } |
| |
| /* Check if the ra register was pushed on the stack. */ |
| offset = -4; |
| if (entry_inst & 0x20) |
| { |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM; |
| set_reg_offset (RA_REGNUM, sp + offset); |
| offset -= MIPS_SAVED_REGSIZE; |
| } |
| |
| /* Check if the s0 and s1 registers were pushed on the stack. */ |
| for (reg = 16; reg < sreg_count + 16; reg++) |
| { |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, sp + offset); |
| offset -= MIPS_SAVED_REGSIZE; |
| } |
| } |
| } |
| |
| static void |
| mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, |
| struct frame_info *next_frame, CORE_ADDR sp) |
| { |
| CORE_ADDR cur_pc; |
| CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */ |
| restart: |
| temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS); |
| memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS); |
| PROC_FRAME_OFFSET (&temp_proc_desc) = 0; |
| PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */ |
| for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN) |
| { |
| unsigned long inst, high_word, low_word; |
| int reg; |
| |
| /* Fetch the instruction. */ |
| inst = (unsigned long) mips_fetch_instruction (cur_pc); |
| |
| /* Save some code by pre-extracting some useful fields. */ |
| high_word = (inst >> 16) & 0xffff; |
| low_word = inst & 0xffff; |
| reg = high_word & 0x1f; |
| |
| if (high_word == 0x27bd /* addiu $sp,$sp,-i */ |
| || high_word == 0x23bd /* addi $sp,$sp,-i */ |
| || high_word == 0x67bd) /* daddiu $sp,$sp,-i */ |
| { |
| if (low_word & 0x8000) /* negative stack adjustment? */ |
| PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word; |
| else |
| /* Exit loop if a positive stack adjustment is found, which |
| usually means that the stack cleanup code in the function |
| epilogue is reached. */ |
| break; |
| } |
| else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */ |
| { |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, sp + low_word); |
| } |
| else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */ |
| { |
| /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra, |
| but the register size used is only 32 bits. Make the address |
| for the saved register point to the lower 32 bits. */ |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE); |
| } |
| else if (high_word == 0x27be) /* addiu $30,$sp,size */ |
| { |
| /* Old gcc frame, r30 is virtual frame pointer. */ |
| if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc)) |
| frame_addr = sp + low_word; |
| else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM) |
| { |
| unsigned alloca_adjust; |
| PROC_FRAME_REG (&temp_proc_desc) = 30; |
| frame_addr = read_next_frame_reg (next_frame, 30); |
| alloca_adjust = (unsigned) (frame_addr - (sp + low_word)); |
| if (alloca_adjust > 0) |
| { |
| /* FP > SP + frame_size. This may be because |
| * of an alloca or somethings similar. |
| * Fix sp to "pre-alloca" value, and try again. |
| */ |
| sp += alloca_adjust; |
| goto restart; |
| } |
| } |
| } |
| /* move $30,$sp. With different versions of gas this will be either |
| `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'. |
| Accept any one of these. */ |
| else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d) |
| { |
| /* New gcc frame, virtual frame pointer is at r30 + frame_size. */ |
| if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM) |
| { |
| unsigned alloca_adjust; |
| PROC_FRAME_REG (&temp_proc_desc) = 30; |
| frame_addr = read_next_frame_reg (next_frame, 30); |
| alloca_adjust = (unsigned) (frame_addr - sp); |
| if (alloca_adjust > 0) |
| { |
| /* FP > SP + frame_size. This may be because |
| * of an alloca or somethings similar. |
| * Fix sp to "pre-alloca" value, and try again. |
| */ |
| sp += alloca_adjust; |
| goto restart; |
| } |
| } |
| } |
| else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */ |
| { |
| PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; |
| set_reg_offset (reg, frame_addr + low_word); |
| } |
| } |
| } |
| |
| static mips_extra_func_info_t |
| heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, |
| struct frame_info *next_frame, int cur_frame) |
| { |
| CORE_ADDR sp; |
| |
| if (cur_frame) |
| sp = read_next_frame_reg (next_frame, SP_REGNUM); |
| else |
| sp = 0; |
| |
| if (start_pc == 0) |
| return NULL; |
| memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc)); |
| temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS); |
| memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS); |
| PROC_LOW_ADDR (&temp_proc_desc) = start_pc; |
| PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM; |
| PROC_PC_REG (&temp_proc_desc) = RA_REGNUM; |
| |
| if (start_pc + 200 < limit_pc) |
| limit_pc = start_pc + 200; |
| if (pc_is_mips16 (start_pc)) |
| mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp); |
| else |
| mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp); |
| return &temp_proc_desc; |
| } |
| |
| struct mips_objfile_private |
| { |
| bfd_size_type size; |
| char *contents; |
| }; |
| |
| /* Global used to communicate between non_heuristic_proc_desc and |
| compare_pdr_entries within qsort (). */ |
| static bfd *the_bfd; |
| |
| static int |
| compare_pdr_entries (const void *a, const void *b) |
| { |
| CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a); |
| CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b); |
| |
| if (lhs < rhs) |
| return -1; |
| else if (lhs == rhs) |
| return 0; |
| else |
| return 1; |
| } |
| |
| static mips_extra_func_info_t |
| non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr) |
| { |
| CORE_ADDR startaddr; |
| mips_extra_func_info_t proc_desc; |
| struct block *b = block_for_pc (pc); |
| struct symbol *sym; |
| struct obj_section *sec; |
| struct mips_objfile_private *priv; |
| |
| if (DEPRECATED_PC_IN_CALL_DUMMY (pc, 0, 0)) |
| return NULL; |
| |
| find_pc_partial_function (pc, NULL, &startaddr, NULL); |
| if (addrptr) |
| *addrptr = startaddr; |
| |
| priv = NULL; |
| |
| sec = find_pc_section (pc); |
| if (sec != NULL) |
| { |
| priv = (struct mips_objfile_private *) sec->objfile->obj_private; |
| |
| /* Search the ".pdr" section generated by GAS. This includes most of |
| the information normally found in ECOFF PDRs. */ |
| |
| the_bfd = sec->objfile->obfd; |
| if (priv == NULL |
| && (the_bfd->format == bfd_object |
| && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour |
| && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64)) |
| { |
| /* Right now GAS only outputs the address as a four-byte sequence. |
| This means that we should not bother with this method on 64-bit |
| targets (until that is fixed). */ |
| |
| priv = obstack_alloc (& sec->objfile->psymbol_obstack, |
| sizeof (struct mips_objfile_private)); |
| priv->size = 0; |
| sec->objfile->obj_private = priv; |
| } |
| else if (priv == NULL) |
| { |
| asection *bfdsec; |
| |
| priv = obstack_alloc (& sec->objfile->psymbol_obstack, |
| sizeof (struct mips_objfile_private)); |
| |
| bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr"); |
| if (bfdsec != NULL) |
| { |
| priv->size = bfd_section_size (sec->objfile->obfd, bfdsec); |
| priv->contents = obstack_alloc (& sec->objfile->psymbol_obstack, |
| priv->size); |
| bfd_get_section_contents (sec->objfile->obfd, bfdsec, |
| priv->contents, 0, priv->size); |
| |
| /* In general, the .pdr section is sorted. However, in the |
| presence of multiple code sections (and other corner cases) |
| it can become unsorted. Sort it so that we can use a faster |
| binary search. */ |
| qsort (priv->contents, priv->size / 32, 32, compare_pdr_entries); |
| } |
| else |
| priv->size = 0; |
| |
| sec->objfile->obj_private = priv; |
| } |
| the_bfd = NULL; |
| |
| if (priv->size != 0) |
| { |
| int low, mid, high; |
| char *ptr; |
| |
| low = 0; |
| high = priv->size / 32; |
| |
| do |
| { |
| CORE_ADDR pdr_pc; |
| |
| mid = (low + high) / 2; |
| |
| ptr = priv->contents + mid * 32; |
| pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr); |
| pdr_pc += ANOFFSET (sec->objfile->section_offsets, |
| SECT_OFF_TEXT (sec->objfile)); |
| if (pdr_pc == startaddr) |
| break; |
| if (pdr_pc > startaddr) |
| high = mid; |
| else |
| low = mid + 1; |
| } |
| while (low != high); |
| |
| if (low != high) |
| { |
| struct symbol *sym = find_pc_function (pc); |
| |
| /* Fill in what we need of the proc_desc. */ |
| proc_desc = (mips_extra_func_info_t) |
| obstack_alloc (&sec->objfile->psymbol_obstack, |
| sizeof (struct mips_extra_func_info)); |
| PROC_LOW_ADDR (proc_desc) = startaddr; |
| |
| /* Only used for dummy frames. */ |
| PROC_HIGH_ADDR (proc_desc) = 0; |
| |
| PROC_FRAME_OFFSET (proc_desc) |
| = bfd_get_32 (sec->objfile->obfd, ptr + 20); |
| PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd, |
| ptr + 24); |
| PROC_FRAME_ADJUST (proc_desc) = 0; |
| PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd, |
| ptr + 4); |
| PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd, |
| ptr + 12); |
| PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd, |
| ptr + 8); |
| PROC_FREG_OFFSET (proc_desc) |
| = bfd_get_32 (sec->objfile->obfd, ptr + 16); |
| PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd, |
| ptr + 28); |
| proc_desc->pdr.isym = (long) sym; |
| |
| return proc_desc; |
| } |
| } |
| } |
| |
| if (b == NULL) |
| return NULL; |
| |
| if (startaddr > BLOCK_START (b)) |
| { |
| /* This is the "pathological" case referred to in a comment in |
| print_frame_info. It might be better to move this check into |
| symbol reading. */ |
| return NULL; |
| } |
| |
| sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL); |
| |
| /* If we never found a PDR for this function in symbol reading, then |
| examine prologues to find the information. */ |
| if (sym) |
| { |
| proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym); |
| if (PROC_FRAME_REG (proc_desc) == -1) |
| return NULL; |
| else |
| return proc_desc; |
| } |
| else |
| return NULL; |
| } |
| |
| |
| static mips_extra_func_info_t |
| find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame) |
| { |
| mips_extra_func_info_t proc_desc; |
| CORE_ADDR startaddr = 0; |
| |
| proc_desc = non_heuristic_proc_desc (pc, &startaddr); |
| |
| if (proc_desc) |
| { |
| /* IF this is the topmost frame AND |
| * (this proc does not have debugging information OR |
| * the PC is in the procedure prologue) |
| * THEN create a "heuristic" proc_desc (by analyzing |
| * the actual code) to replace the "official" proc_desc. |
| */ |
| if (next_frame == NULL) |
| { |
| struct symtab_and_line val; |
| struct symbol *proc_symbol = |
| PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc); |
| |
| if (proc_symbol) |
| { |
| val = find_pc_line (BLOCK_START |
| (SYMBOL_BLOCK_VALUE (proc_symbol)), |
| 0); |
| val.pc = val.end ? val.end : pc; |
| } |
| if (!proc_symbol || pc < val.pc) |
| { |
| mips_extra_func_info_t found_heuristic = |
| heuristic_proc_desc (PROC_LOW_ADDR (proc_desc), |
| pc, next_frame, cur_frame); |
| if (found_heuristic) |
| proc_desc = found_heuristic; |
| } |
| } |
| } |
| else |
| { |
| /* Is linked_proc_desc_table really necessary? It only seems to be used |
| by procedure call dummys. However, the procedures being called ought |
| to have their own proc_descs, and even if they don't, |
| heuristic_proc_desc knows how to create them! */ |
| |
| register struct linked_proc_info *link; |
| |
| for (link = linked_proc_desc_table; link; link = link->next) |
| if (PROC_LOW_ADDR (&link->info) <= pc |
| && PROC_HIGH_ADDR (&link->info) > pc) |
| return &link->info; |
| |
| if (startaddr == 0) |
| startaddr = heuristic_proc_start (pc); |
| |
| proc_desc = |
| heuristic_proc_desc (startaddr, pc, next_frame, cur_frame); |
| } |
| return proc_desc; |
| } |
| |
| static CORE_ADDR |
| get_frame_pointer (struct frame_info *frame, |
| mips_extra_func_info_t proc_desc) |
| { |
| return ADDR_BITS_REMOVE (read_next_frame_reg (frame, |
| PROC_FRAME_REG (proc_desc)) + |
| PROC_FRAME_OFFSET (proc_desc) - |
| PROC_FRAME_ADJUST (proc_desc)); |
| } |
| |
| static mips_extra_func_info_t cached_proc_desc; |
| |
| static CORE_ADDR |
| mips_frame_chain (struct frame_info *frame) |
| { |
| mips_extra_func_info_t proc_desc; |
| CORE_ADDR tmp; |
| CORE_ADDR saved_pc = DEPRECATED_FRAME_SAVED_PC (frame); |
| |
| if (saved_pc == 0 || inside_entry_file (saved_pc)) |
| return 0; |
| |
| /* Check if the PC is inside a call stub. If it is, fetch the |
| PC of the caller of that stub. */ |
| if ((tmp = SKIP_TRAMPOLINE_CODE (saved_pc)) != 0) |
| saved_pc = tmp; |
| |
| if (DEPRECATED_PC_IN_CALL_DUMMY (saved_pc, 0, 0)) |
| { |
| /* A dummy frame, uses SP not FP. Get the old SP value. If all |
| is well, frame->frame the bottom of the current frame will |
| contain that value. */ |
| return get_frame_base (frame); |
| } |
| |
| /* Look up the procedure descriptor for this PC. */ |
| proc_desc = find_proc_desc (saved_pc, frame, 1); |
| if (!proc_desc) |
| return 0; |
| |
| cached_proc_desc = proc_desc; |
| |
| /* If no frame pointer and frame size is zero, we must be at end |
| of stack (or otherwise hosed). If we don't check frame size, |
| we loop forever if we see a zero size frame. */ |
| if (PROC_FRAME_REG (proc_desc) == SP_REGNUM |
| && PROC_FRAME_OFFSET (proc_desc) == 0 |
| /* The previous frame from a sigtramp frame might be frameless |
| and have frame size zero. */ |
| && !(get_frame_type (frame) == SIGTRAMP_FRAME) |
| /* For a generic dummy frame, let get_frame_pointer() unwind a |
| register value saved as part of the dummy frame call. */ |
| && !(DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0))) |
| return 0; |
| else |
| return get_frame_pointer (frame, proc_desc); |
| } |
| |
| static void |
| mips_init_extra_frame_info (int fromleaf, struct frame_info *fci) |
| { |
| int regnum; |
| mips_extra_func_info_t proc_desc; |
| |
| if (get_frame_type (fci) == DUMMY_FRAME) |
| return; |
| |
| /* Use proc_desc calculated in frame_chain. When there is no |
| next frame, i.e, get_next_frame (fci) == NULL, we call |
| find_proc_desc () to calculate it, passing an explicit |
| NULL as the frame parameter. */ |
| proc_desc = |
| get_next_frame (fci) |
| ? cached_proc_desc |
| : find_proc_desc (get_frame_pc (fci), |
| NULL /* i.e, get_next_frame (fci) */, |
| 1); |
| |
| frame_extra_info_zalloc (fci, sizeof (struct frame_extra_info)); |
| |
| deprecated_set_frame_saved_regs_hack (fci, NULL); |
| get_frame_extra_info (fci)->proc_desc = |
| proc_desc == &temp_proc_desc ? 0 : proc_desc; |
| if (proc_desc) |
| { |
| /* Fixup frame-pointer - only needed for top frame */ |
| /* This may not be quite right, if proc has a real frame register. |
| Get the value of the frame relative sp, procedure might have been |
| interrupted by a signal at it's very start. */ |
| if (get_frame_pc (fci) == PROC_LOW_ADDR (proc_desc) |
| && !PROC_DESC_IS_DUMMY (proc_desc)) |
| deprecated_update_frame_base_hack (fci, read_next_frame_reg (get_next_frame (fci), SP_REGNUM)); |
| else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fci), 0, 0)) |
| /* Do not ``fix'' fci->frame. It will have the value of the |
| generic dummy frame's top-of-stack (since the draft |
| fci->frame is obtained by returning the unwound stack |
| pointer) and that is what we want. That way the fci->frame |
| value will match the top-of-stack value that was saved as |
| part of the dummy frames data. */ |
| /* Do nothing. */; |
| else |
| deprecated_update_frame_base_hack (fci, get_frame_pointer (get_next_frame (fci), proc_desc)); |
| |
| if (proc_desc == &temp_proc_desc) |
| { |
| char *name; |
| |
| /* Do not set the saved registers for a sigtramp frame, |
| mips_find_saved_registers will do that for us. We can't |
| use (get_frame_type (fci) == SIGTRAMP_FRAME), it is not |
| yet set. */ |
| /* FIXME: cagney/2002-11-18: This problem will go away once |
| frame.c:get_prev_frame() is modified to set the frame's |
| type before calling functions like this. */ |
| find_pc_partial_function (get_frame_pc (fci), &name, |
| (CORE_ADDR *) NULL, (CORE_ADDR *) NULL); |
| if (!PC_IN_SIGTRAMP (get_frame_pc (fci), name)) |
| { |
| frame_saved_regs_zalloc (fci); |
| memcpy (get_frame_saved_regs (fci), temp_saved_regs, SIZEOF_FRAME_SAVED_REGS); |
| get_frame_saved_regs (fci)[PC_REGNUM] |
| = get_frame_saved_regs (fci)[RA_REGNUM]; |
| /* Set value of previous frame's stack pointer. Remember that |
| saved_regs[SP_REGNUM] is special in that it contains the |
| value of the stack pointer register. The other saved_regs |
| values are addresses (in the inferior) at which a given |
| register's value may be found. */ |
| get_frame_saved_regs (fci)[SP_REGNUM] = get_frame_base (fci); |
| } |
| } |
| |
| /* hack: if argument regs are saved, guess these contain args */ |
| /* assume we can't tell how many args for now */ |
| get_frame_extra_info (fci)->num_args = -1; |
| for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--) |
| { |
| if (PROC_REG_MASK (proc_desc) & (1 << regnum)) |
| { |
| get_frame_extra_info (fci)->num_args = regnum - A0_REGNUM + 1; |
| break; |
| } |
| } |
| } |
| } |
| |
| /* MIPS stack frames are almost impenetrable. When execution stops, |
| we basically have to look at symbol information for the function |
| that we stopped in, which tells us *which* register (if any) is |
| the base of the frame pointer, and what offset from that register |
| the frame itself is at. |
| |
| This presents a problem when trying to examine a stack in memory |
| (that isn't executing at the moment), using the "frame" command. We |
| don't have a PC, nor do we have any registers except SP. |
| |
| This routine takes two arguments, SP and PC, and tries to make the |
| cached frames look as if these two arguments defined a frame on the |
| cache. This allows the rest of info frame to extract the important |
| arguments without difficulty. */ |
| |
| struct frame_info * |
| setup_arbitrary_frame (int argc, CORE_ADDR *argv) |
| { |
| if (argc != 2) |
| error ("MIPS frame specifications require two arguments: sp and pc"); |
| |
| return create_new_frame (argv[0], argv[1]); |
| } |
| |
| /* According to the current ABI, should the type be passed in a |
| floating-point register (assuming that there is space)? When there |
| is no FPU, FP are not even considered as possibile candidates for |
| FP registers and, consequently this returns false - forces FP |
| arguments into integer registers. */ |
| |
| static int |
| fp_register_arg_p (enum type_code typecode, struct type *arg_type) |
| { |
| return ((typecode == TYPE_CODE_FLT |
| || (MIPS_EABI |
| && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION) |
| && TYPE_NFIELDS (arg_type) == 1 |
| && TYPE_CODE (TYPE_FIELD_TYPE (arg_type, 0)) == TYPE_CODE_FLT)) |
| && MIPS_FPU_TYPE != MIPS_FPU_NONE); |
| } |
| |
| /* On o32, argument passing in GPRs depends on the alignment of the type being |
| passed. Return 1 if this type must be aligned to a doubleword boundary. */ |
| |
| static int |
| mips_type_needs_double_align (struct type *type) |
| { |
| enum type_code typecode = TYPE_CODE (type); |
| |
| if (typecode == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8) |
| return 1; |
| else if (typecode == TYPE_CODE_STRUCT) |
| { |
| if (TYPE_NFIELDS (type) < 1) |
| return 0; |
| return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0)); |
| } |
| else if (typecode == TYPE_CODE_UNION) |
| { |
| int i, n; |
| |
| n = TYPE_NFIELDS (type); |
| for (i = 0; i < n; i++) |
| if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i))) |
| return 1; |
| return 0; |
| } |
| return 0; |
| } |
| |
| /* Macros to round N up or down to the next A boundary; |
| A must be a power of two. */ |
| |
| #define ROUND_DOWN(n,a) ((n) & ~((a)-1)) |
| #define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1)) |
| |
| /* Adjust the address downward (direction of stack growth) so that it |
| is correctly aligned for a new stack frame. */ |
| static CORE_ADDR |
| mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) |
| { |
| return ROUND_DOWN (addr, 16); |
| } |
| |
| static CORE_ADDR |
| mips_eabi_push_arguments (int nargs, |
| struct value **args, |
| CORE_ADDR sp, |
| int struct_return, |
| CORE_ADDR struct_addr) |
| { |
| int argreg; |
| int float_argreg; |
| int argnum; |
| int len = 0; |
| int stack_offset = 0; |
| |
| /* First ensure that the stack and structure return address (if any) |
| are properly aligned. The stack has to be at least 64-bit |
| aligned even on 32-bit machines, because doubles must be 64-bit |
| aligned. For n32 and n64, stack frames need to be 128-bit |
| aligned, so we round to this widest known alignment. */ |
| |
| sp = ROUND_DOWN (sp, 16); |
| struct_addr = ROUND_DOWN (struct_addr, 16); |
| |
| /* Now make space on the stack for the args. We allocate more |
| than necessary for EABI, because the first few arguments are |
| passed in registers, but that's OK. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), |
| MIPS_STACK_ARGSIZE); |
| sp -= ROUND_UP (len, 16); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_eabi_push_arguments: sp=0x%s allocated %d\n", |
| paddr_nz (sp), ROUND_UP (len, 16)); |
| |
| /* Initialize the integer and float register pointers. */ |
| argreg = A0_REGNUM; |
| float_argreg = FPA0_REGNUM; |
| |
| /* The struct_return pointer occupies the first parameter-passing reg. */ |
| if (struct_return) |
| { |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_eabi_push_arguments: struct_return reg=%d 0x%s\n", |
| argreg, paddr_nz (struct_addr)); |
| write_register (argreg++, struct_addr); |
| } |
| |
| /* Now load as many as possible of the first arguments into |
| registers, and push the rest onto the stack. Loop thru args |
| from first to last. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| { |
| char *val; |
| char *valbuf = alloca (MAX_REGISTER_RAW_SIZE); |
| struct value *arg = args[argnum]; |
| struct type *arg_type = check_typedef (VALUE_TYPE (arg)); |
| int len = TYPE_LENGTH (arg_type); |
| enum type_code typecode = TYPE_CODE (arg_type); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_eabi_push_arguments: %d len=%d type=%d", |
| argnum + 1, len, (int) typecode); |
| |
| /* The EABI passes structures that do not fit in a register by |
| reference. */ |
| if (len > MIPS_SAVED_REGSIZE |
| && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION)) |
| { |
| store_address (valbuf, MIPS_SAVED_REGSIZE, VALUE_ADDRESS (arg)); |
| typecode = TYPE_CODE_PTR; |
| len = MIPS_SAVED_REGSIZE; |
| val = valbuf; |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " push"); |
| } |
| else |
| val = (char *) VALUE_CONTENTS (arg); |
| |
| /* 32-bit ABIs always start floating point arguments in an |
| even-numbered floating point register. Round the FP register |
| up before the check to see if there are any FP registers |
| left. Non MIPS_EABI targets also pass the FP in the integer |
| registers so also round up normal registers. */ |
| if (!FP_REGISTER_DOUBLE |
| && fp_register_arg_p (typecode, arg_type)) |
| { |
| if ((float_argreg & 1)) |
| float_argreg++; |
| } |
| |
| /* Floating point arguments passed in registers have to be |
| treated specially. On 32-bit architectures, doubles |
| are passed in register pairs; the even register gets |
| the low word, and the odd register gets the high word. |
| On non-EABI processors, the first two floating point arguments are |
| also copied to general registers, because MIPS16 functions |
| don't use float registers for arguments. This duplication of |
| arguments in general registers can't hurt non-MIPS16 functions |
| because those registers are normally skipped. */ |
| /* MIPS_EABI squeezes a struct that contains a single floating |
| point value into an FP register instead of pushing it onto the |
| stack. */ |
| if (fp_register_arg_p (typecode, arg_type) |
| && float_argreg <= MIPS_LAST_FP_ARG_REGNUM) |
| { |
| if (!FP_REGISTER_DOUBLE && len == 8) |
| { |
| int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0; |
| unsigned long regval; |
| |
| /* Write the low word of the double to the even register(s). */ |
| regval = extract_unsigned_integer (val + low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| |
| /* Write the high word of the double to the odd register(s). */ |
| regval = extract_unsigned_integer (val + 4 - low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| } |
| else |
| { |
| /* This is a floating point value that fits entirely |
| in a single register. */ |
| /* On 32 bit ABI's the float_argreg is further adjusted |
| above to ensure that it is even register aligned. */ |
| LONGEST regval = extract_unsigned_integer (val, len); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, len)); |
| write_register (float_argreg++, regval); |
| } |
| } |
| else |
| { |
| /* Copy the argument to general registers or the stack in |
| register-sized pieces. Large arguments are split between |
| registers and stack. */ |
| /* Note: structs whose size is not a multiple of MIPS_REGSIZE |
| are treated specially: Irix cc passes them in registers |
| where gcc sometimes puts them on the stack. For maximum |
| compatibility, we will put them in both places. */ |
| int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) && |
| (len % MIPS_SAVED_REGSIZE != 0)); |
| |
| /* Note: Floating-point values that didn't fit into an FP |
| register are only written to memory. */ |
| while (len > 0) |
| { |
| /* Remember if the argument was written to the stack. */ |
| int stack_used_p = 0; |
| int partial_len = |
| len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE; |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " -- partial=%d", |
| partial_len); |
| |
| /* Write this portion of the argument to the stack. */ |
| if (argreg > MIPS_LAST_ARG_REGNUM |
| || odd_sized_struct |
| || fp_register_arg_p (typecode, arg_type)) |
| { |
| /* Should shorter than int integer values be |
| promoted to int before being stored? */ |
| int longword_offset = 0; |
| CORE_ADDR addr; |
| stack_used_p = 1; |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| if (MIPS_STACK_ARGSIZE == 8 && |
| (typecode == TYPE_CODE_INT || |
| typecode == TYPE_CODE_PTR || |
| typecode == TYPE_CODE_FLT) && len <= 4) |
| longword_offset = MIPS_STACK_ARGSIZE - len; |
| else if ((typecode == TYPE_CODE_STRUCT || |
| typecode == TYPE_CODE_UNION) && |
| TYPE_LENGTH (arg_type) < MIPS_STACK_ARGSIZE) |
| longword_offset = MIPS_STACK_ARGSIZE - len; |
| } |
| |
| if (mips_debug) |
| { |
| fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s", |
| paddr_nz (stack_offset)); |
| fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s", |
| paddr_nz (longword_offset)); |
| } |
| |
| addr = sp + stack_offset + longword_offset; |
| |
| if (mips_debug) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, " @0x%s ", |
| paddr_nz (addr)); |
| for (i = 0; i < partial_len; i++) |
| { |
| fprintf_unfiltered (gdb_stdlog, "%02x", |
| val[i] & 0xff); |
| } |
| } |
| write_memory (addr, val, partial_len); |
| } |
| |
| /* Note!!! This is NOT an else clause. Odd sized |
| structs may go thru BOTH paths. Floating point |
| arguments will not. */ |
| /* Write this portion of the argument to a general |
| purpose register. */ |
| if (argreg <= MIPS_LAST_ARG_REGNUM |
| && !fp_register_arg_p (typecode, arg_type)) |
| { |
| LONGEST regval = extract_unsigned_integer (val, partial_len); |
| |
| if (mips_debug) |
| fprintf_filtered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, |
| phex (regval, MIPS_SAVED_REGSIZE)); |
| write_register (argreg, regval); |
| argreg++; |
| } |
| |
| len -= partial_len; |
| val += partial_len; |
| |
| /* Compute the the offset into the stack at which we |
| will copy the next parameter. |
| |
| In the new EABI (and the NABI32), the stack_offset |
| only needs to be adjusted when it has been used. */ |
| |
| if (stack_used_p) |
| stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE); |
| } |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, "\n"); |
| } |
| |
| /* Return adjusted stack pointer. */ |
| return sp; |
| } |
| |
| /* N32/N64 version of push_arguments. */ |
| |
| static CORE_ADDR |
| mips_n32n64_push_arguments (int nargs, |
| struct value **args, |
| CORE_ADDR sp, |
| int struct_return, |
| CORE_ADDR struct_addr) |
| { |
| int argreg; |
| int float_argreg; |
| int argnum; |
| int len = 0; |
| int stack_offset = 0; |
| |
| /* First ensure that the stack and structure return address (if any) |
| are properly aligned. The stack has to be at least 64-bit |
| aligned even on 32-bit machines, because doubles must be 64-bit |
| aligned. For n32 and n64, stack frames need to be 128-bit |
| aligned, so we round to this widest known alignment. */ |
| |
| sp = ROUND_DOWN (sp, 16); |
| struct_addr = ROUND_DOWN (struct_addr, 16); |
| |
| /* Now make space on the stack for the args. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), |
| MIPS_STACK_ARGSIZE); |
| sp -= ROUND_UP (len, 16); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_n32n64_push_arguments: sp=0x%s allocated %d\n", |
| paddr_nz (sp), ROUND_UP (len, 16)); |
| |
| /* Initialize the integer and float register pointers. */ |
| argreg = A0_REGNUM; |
| float_argreg = FPA0_REGNUM; |
| |
| /* The struct_return pointer occupies the first parameter-passing reg. */ |
| if (struct_return) |
| { |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_n32n64_push_arguments: struct_return reg=%d 0x%s\n", |
| argreg, paddr_nz (struct_addr)); |
| write_register (argreg++, struct_addr); |
| } |
| |
| /* Now load as many as possible of the first arguments into |
| registers, and push the rest onto the stack. Loop thru args |
| from first to last. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| { |
| char *val; |
| char *valbuf = alloca (MAX_REGISTER_RAW_SIZE); |
| struct value *arg = args[argnum]; |
| struct type *arg_type = check_typedef (VALUE_TYPE (arg)); |
| int len = TYPE_LENGTH (arg_type); |
| enum type_code typecode = TYPE_CODE (arg_type); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_n32n64_push_arguments: %d len=%d type=%d", |
| argnum + 1, len, (int) typecode); |
| |
| val = (char *) VALUE_CONTENTS (arg); |
| |
| if (fp_register_arg_p (typecode, arg_type) |
| && float_argreg <= MIPS_LAST_FP_ARG_REGNUM) |
| { |
| /* This is a floating point value that fits entirely |
| in a single register. */ |
| /* On 32 bit ABI's the float_argreg is further adjusted |
| above to ensure that it is even register aligned. */ |
| LONGEST regval = extract_unsigned_integer (val, len); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, len)); |
| write_register (float_argreg++, regval); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, len)); |
| write_register (argreg, regval); |
| argreg += 1; |
| } |
| else |
| { |
| /* Copy the argument to general registers or the stack in |
| register-sized pieces. Large arguments are split between |
| registers and stack. */ |
| /* Note: structs whose size is not a multiple of MIPS_REGSIZE |
| are treated specially: Irix cc passes them in registers |
| where gcc sometimes puts them on the stack. For maximum |
| compatibility, we will put them in both places. */ |
| int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) && |
| (len % MIPS_SAVED_REGSIZE != 0)); |
| /* Note: Floating-point values that didn't fit into an FP |
| register are only written to memory. */ |
| while (len > 0) |
| { |
| /* Rememer if the argument was written to the stack. */ |
| int stack_used_p = 0; |
| int partial_len = len < MIPS_SAVED_REGSIZE ? |
| len : MIPS_SAVED_REGSIZE; |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " -- partial=%d", |
| partial_len); |
| |
| /* Write this portion of the argument to the stack. */ |
| if (argreg > MIPS_LAST_ARG_REGNUM |
| || odd_sized_struct |
| || fp_register_arg_p (typecode, arg_type)) |
| { |
| /* Should shorter than int integer values be |
| promoted to int before being stored? */ |
| int longword_offset = 0; |
| CORE_ADDR addr; |
| stack_used_p = 1; |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| if (MIPS_STACK_ARGSIZE == 8 && |
| (typecode == TYPE_CODE_INT || |
| typecode == TYPE_CODE_PTR || |
| typecode == TYPE_CODE_FLT) && len <= 4) |
| longword_offset = MIPS_STACK_ARGSIZE - len; |
| } |
| |
| if (mips_debug) |
| { |
| fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s", |
| paddr_nz (stack_offset)); |
| fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s", |
| paddr_nz (longword_offset)); |
| } |
| |
| addr = sp + stack_offset + longword_offset; |
| |
| if (mips_debug) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, " @0x%s ", |
| paddr_nz (addr)); |
| for (i = 0; i < partial_len; i++) |
| { |
| fprintf_unfiltered (gdb_stdlog, "%02x", |
| val[i] & 0xff); |
| } |
| } |
| write_memory (addr, val, partial_len); |
| } |
| |
| /* Note!!! This is NOT an else clause. Odd sized |
| structs may go thru BOTH paths. Floating point |
| arguments will not. */ |
| /* Write this portion of the argument to a general |
| purpose register. */ |
| if (argreg <= MIPS_LAST_ARG_REGNUM |
| && !fp_register_arg_p (typecode, arg_type)) |
| { |
| LONGEST regval = extract_unsigned_integer (val, partial_len); |
| |
| /* A non-floating-point argument being passed in a |
| general register. If a struct or union, and if |
| the remaining length is smaller than the register |
| size, we have to adjust the register value on |
| big endian targets. |
| |
| It does not seem to be necessary to do the |
| same for integral types. |
| |
| cagney/2001-07-23: gdb/179: Also, GCC, when |
| outputting LE O32 with sizeof (struct) < |
| MIPS_SAVED_REGSIZE, generates a left shift as |
| part of storing the argument in a register a |
| register (the left shift isn't generated when |
| sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it |
| is quite possible that this is GCC contradicting |
| the LE/O32 ABI, GDB has not been adjusted to |
| accommodate this. Either someone needs to |
| demonstrate that the LE/O32 ABI specifies such a |
| left shift OR this new ABI gets identified as |
| such and GDB gets tweaked accordingly. */ |
| |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && partial_len < MIPS_SAVED_REGSIZE |
| && (typecode == TYPE_CODE_STRUCT || |
| typecode == TYPE_CODE_UNION)) |
| regval <<= ((MIPS_SAVED_REGSIZE - partial_len) * |
| TARGET_CHAR_BIT); |
| |
| if (mips_debug) |
| fprintf_filtered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, |
| phex (regval, MIPS_SAVED_REGSIZE)); |
| write_register (argreg, regval); |
| argreg++; |
| } |
| |
| len -= partial_len; |
| val += partial_len; |
| |
| /* Compute the the offset into the stack at which we |
| will copy the next parameter. |
| |
| In N32 (N64?), the stack_offset only needs to be |
| adjusted when it has been used. */ |
| |
| if (stack_used_p) |
| stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE); |
| } |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, "\n"); |
| } |
| |
| /* Return adjusted stack pointer. */ |
| return sp; |
| } |
| |
| /* O32 version of push_arguments. */ |
| |
| static CORE_ADDR |
| mips_o32_push_arguments (int nargs, |
| struct value **args, |
| CORE_ADDR sp, |
| int struct_return, |
| CORE_ADDR struct_addr) |
| { |
| int argreg; |
| int float_argreg; |
| int argnum; |
| int len = 0; |
| int stack_offset = 0; |
| |
| /* First ensure that the stack and structure return address (if any) |
| are properly aligned. The stack has to be at least 64-bit |
| aligned even on 32-bit machines, because doubles must be 64-bit |
| aligned. For n32 and n64, stack frames need to be 128-bit |
| aligned, so we round to this widest known alignment. */ |
| |
| sp = ROUND_DOWN (sp, 16); |
| struct_addr = ROUND_DOWN (struct_addr, 16); |
| |
| /* Now make space on the stack for the args. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), |
| MIPS_STACK_ARGSIZE); |
| sp -= ROUND_UP (len, 16); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o32_push_arguments: sp=0x%s allocated %d\n", |
| paddr_nz (sp), ROUND_UP (len, 16)); |
| |
| /* Initialize the integer and float register pointers. */ |
| argreg = A0_REGNUM; |
| float_argreg = FPA0_REGNUM; |
| |
| /* The struct_return pointer occupies the first parameter-passing reg. */ |
| if (struct_return) |
| { |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o32_push_arguments: struct_return reg=%d 0x%s\n", |
| argreg, paddr_nz (struct_addr)); |
| write_register (argreg++, struct_addr); |
| stack_offset += MIPS_STACK_ARGSIZE; |
| } |
| |
| /* Now load as many as possible of the first arguments into |
| registers, and push the rest onto the stack. Loop thru args |
| from first to last. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| { |
| char *val; |
| char *valbuf = alloca (MAX_REGISTER_RAW_SIZE); |
| struct value *arg = args[argnum]; |
| struct type *arg_type = check_typedef (VALUE_TYPE (arg)); |
| int len = TYPE_LENGTH (arg_type); |
| enum type_code typecode = TYPE_CODE (arg_type); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o32_push_arguments: %d len=%d type=%d", |
| argnum + 1, len, (int) typecode); |
| |
| val = (char *) VALUE_CONTENTS (arg); |
| |
| /* 32-bit ABIs always start floating point arguments in an |
| even-numbered floating point register. Round the FP register |
| up before the check to see if there are any FP registers |
| left. O32/O64 targets also pass the FP in the integer |
| registers so also round up normal registers. */ |
| if (!FP_REGISTER_DOUBLE |
| && fp_register_arg_p (typecode, arg_type)) |
| { |
| if ((float_argreg & 1)) |
| float_argreg++; |
| } |
| |
| /* Floating point arguments passed in registers have to be |
| treated specially. On 32-bit architectures, doubles |
| are passed in register pairs; the even register gets |
| the low word, and the odd register gets the high word. |
| On O32/O64, the first two floating point arguments are |
| also copied to general registers, because MIPS16 functions |
| don't use float registers for arguments. This duplication of |
| arguments in general registers can't hurt non-MIPS16 functions |
| because those registers are normally skipped. */ |
| |
| if (fp_register_arg_p (typecode, arg_type) |
| && float_argreg <= MIPS_LAST_FP_ARG_REGNUM) |
| { |
| if (!FP_REGISTER_DOUBLE && len == 8) |
| { |
| int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0; |
| unsigned long regval; |
| |
| /* Write the low word of the double to the even register(s). */ |
| regval = extract_unsigned_integer (val + low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, 4)); |
| write_register (argreg++, regval); |
| |
| /* Write the high word of the double to the odd register(s). */ |
| regval = extract_unsigned_integer (val + 4 - low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, 4)); |
| write_register (argreg++, regval); |
| } |
| else |
| { |
| /* This is a floating point value that fits entirely |
| in a single register. */ |
| /* On 32 bit ABI's the float_argreg is further adjusted |
| above to ensure that it is even register aligned. */ |
| LONGEST regval = extract_unsigned_integer (val, len); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, len)); |
| write_register (float_argreg++, regval); |
| /* CAGNEY: 32 bit MIPS ABI's always reserve two FP |
| registers for each argument. The below is (my |
| guess) to ensure that the corresponding integer |
| register has reserved the same space. */ |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, len)); |
| write_register (argreg, regval); |
| argreg += FP_REGISTER_DOUBLE ? 1 : 2; |
| } |
| /* Reserve space for the FP register. */ |
| stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE); |
| } |
| else |
| { |
| /* Copy the argument to general registers or the stack in |
| register-sized pieces. Large arguments are split between |
| registers and stack. */ |
| /* Note: structs whose size is not a multiple of MIPS_REGSIZE |
| are treated specially: Irix cc passes them in registers |
| where gcc sometimes puts them on the stack. For maximum |
| compatibility, we will put them in both places. */ |
| int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) && |
| (len % MIPS_SAVED_REGSIZE != 0)); |
| /* Structures should be aligned to eight bytes (even arg registers) |
| on MIPS_ABI_O32, if their first member has double precision. */ |
| if (MIPS_SAVED_REGSIZE < 8 |
| && mips_type_needs_double_align (arg_type)) |
| { |
| if ((argreg & 1)) |
| argreg++; |
| } |
| /* Note: Floating-point values that didn't fit into an FP |
| register are only written to memory. */ |
| while (len > 0) |
| { |
| /* Remember if the argument was written to the stack. */ |
| int stack_used_p = 0; |
| int partial_len = |
| len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE; |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " -- partial=%d", |
| partial_len); |
| |
| /* Write this portion of the argument to the stack. */ |
| if (argreg > MIPS_LAST_ARG_REGNUM |
| || odd_sized_struct |
| || fp_register_arg_p (typecode, arg_type)) |
| { |
| /* Should shorter than int integer values be |
| promoted to int before being stored? */ |
| int longword_offset = 0; |
| CORE_ADDR addr; |
| stack_used_p = 1; |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| if (MIPS_STACK_ARGSIZE == 8 && |
| (typecode == TYPE_CODE_INT || |
| typecode == TYPE_CODE_PTR || |
| typecode == TYPE_CODE_FLT) && len <= 4) |
| longword_offset = MIPS_STACK_ARGSIZE - len; |
| } |
| |
| if (mips_debug) |
| { |
| fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s", |
| paddr_nz (stack_offset)); |
| fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s", |
| paddr_nz (longword_offset)); |
| } |
| |
| addr = sp + stack_offset + longword_offset; |
| |
| if (mips_debug) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, " @0x%s ", |
| paddr_nz (addr)); |
| for (i = 0; i < partial_len; i++) |
| { |
| fprintf_unfiltered (gdb_stdlog, "%02x", |
| val[i] & 0xff); |
| } |
| } |
| write_memory (addr, val, partial_len); |
| } |
| |
| /* Note!!! This is NOT an else clause. Odd sized |
| structs may go thru BOTH paths. Floating point |
| arguments will not. */ |
| /* Write this portion of the argument to a general |
| purpose register. */ |
| if (argreg <= MIPS_LAST_ARG_REGNUM |
| && !fp_register_arg_p (typecode, arg_type)) |
| { |
| LONGEST regval = extract_signed_integer (val, partial_len); |
| /* Value may need to be sign extended, because |
| MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */ |
| |
| /* A non-floating-point argument being passed in a |
| general register. If a struct or union, and if |
| the remaining length is smaller than the register |
| size, we have to adjust the register value on |
| big endian targets. |
| |
| It does not seem to be necessary to do the |
| same for integral types. |
| |
| Also don't do this adjustment on O64 binaries. |
| |
| cagney/2001-07-23: gdb/179: Also, GCC, when |
| outputting LE O32 with sizeof (struct) < |
| MIPS_SAVED_REGSIZE, generates a left shift as |
| part of storing the argument in a register a |
| register (the left shift isn't generated when |
| sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it |
| is quite possible that this is GCC contradicting |
| the LE/O32 ABI, GDB has not been adjusted to |
| accommodate this. Either someone needs to |
| demonstrate that the LE/O32 ABI specifies such a |
| left shift OR this new ABI gets identified as |
| such and GDB gets tweaked accordingly. */ |
| |
| if (MIPS_SAVED_REGSIZE < 8 |
| && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && partial_len < MIPS_SAVED_REGSIZE |
| && (typecode == TYPE_CODE_STRUCT || |
| typecode == TYPE_CODE_UNION)) |
| regval <<= ((MIPS_SAVED_REGSIZE - partial_len) * |
| TARGET_CHAR_BIT); |
| |
| if (mips_debug) |
| fprintf_filtered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, |
| phex (regval, MIPS_SAVED_REGSIZE)); |
| write_register (argreg, regval); |
| argreg++; |
| |
| /* Prevent subsequent floating point arguments from |
| being passed in floating point registers. */ |
| float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1; |
| } |
| |
| len -= partial_len; |
| val += partial_len; |
| |
| /* Compute the the offset into the stack at which we |
| will copy the next parameter. |
| |
| In older ABIs, the caller reserved space for |
| registers that contained arguments. This was loosely |
| refered to as their "home". Consequently, space is |
| always allocated. */ |
| |
| stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE); |
| } |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, "\n"); |
| } |
| |
| /* Return adjusted stack pointer. */ |
| return sp; |
| } |
| |
| /* O64 version of push_arguments. */ |
| |
| static CORE_ADDR |
| mips_o64_push_arguments (int nargs, |
| struct value **args, |
| CORE_ADDR sp, |
| int struct_return, |
| CORE_ADDR struct_addr) |
| { |
| int argreg; |
| int float_argreg; |
| int argnum; |
| int len = 0; |
| int stack_offset = 0; |
| |
| /* First ensure that the stack and structure return address (if any) |
| are properly aligned. The stack has to be at least 64-bit |
| aligned even on 32-bit machines, because doubles must be 64-bit |
| aligned. For n32 and n64, stack frames need to be 128-bit |
| aligned, so we round to this widest known alignment. */ |
| |
| sp = ROUND_DOWN (sp, 16); |
| struct_addr = ROUND_DOWN (struct_addr, 16); |
| |
| /* Now make space on the stack for the args. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| len += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), |
| MIPS_STACK_ARGSIZE); |
| sp -= ROUND_UP (len, 16); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o64_push_arguments: sp=0x%s allocated %d\n", |
| paddr_nz (sp), ROUND_UP (len, 16)); |
| |
| /* Initialize the integer and float register pointers. */ |
| argreg = A0_REGNUM; |
| float_argreg = FPA0_REGNUM; |
| |
| /* The struct_return pointer occupies the first parameter-passing reg. */ |
| if (struct_return) |
| { |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o64_push_arguments: struct_return reg=%d 0x%s\n", |
| argreg, paddr_nz (struct_addr)); |
| write_register (argreg++, struct_addr); |
| stack_offset += MIPS_STACK_ARGSIZE; |
| } |
| |
| /* Now load as many as possible of the first arguments into |
| registers, and push the rest onto the stack. Loop thru args |
| from first to last. */ |
| for (argnum = 0; argnum < nargs; argnum++) |
| { |
| char *val; |
| char *valbuf = alloca (MAX_REGISTER_RAW_SIZE); |
| struct value *arg = args[argnum]; |
| struct type *arg_type = check_typedef (VALUE_TYPE (arg)); |
| int len = TYPE_LENGTH (arg_type); |
| enum type_code typecode = TYPE_CODE (arg_type); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_o64_push_arguments: %d len=%d type=%d", |
| argnum + 1, len, (int) typecode); |
| |
| val = (char *) VALUE_CONTENTS (arg); |
| |
| /* 32-bit ABIs always start floating point arguments in an |
| even-numbered floating point register. Round the FP register |
| up before the check to see if there are any FP registers |
| left. O32/O64 targets also pass the FP in the integer |
| registers so also round up normal registers. */ |
| if (!FP_REGISTER_DOUBLE |
| && fp_register_arg_p (typecode, arg_type)) |
| { |
| if ((float_argreg & 1)) |
| float_argreg++; |
| } |
| |
| /* Floating point arguments passed in registers have to be |
| treated specially. On 32-bit architectures, doubles |
| are passed in register pairs; the even register gets |
| the low word, and the odd register gets the high word. |
| On O32/O64, the first two floating point arguments are |
| also copied to general registers, because MIPS16 functions |
| don't use float registers for arguments. This duplication of |
| arguments in general registers can't hurt non-MIPS16 functions |
| because those registers are normally skipped. */ |
| |
| if (fp_register_arg_p (typecode, arg_type) |
| && float_argreg <= MIPS_LAST_FP_ARG_REGNUM) |
| { |
| if (!FP_REGISTER_DOUBLE && len == 8) |
| { |
| int low_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0; |
| unsigned long regval; |
| |
| /* Write the low word of the double to the even register(s). */ |
| regval = extract_unsigned_integer (val + low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, 4)); |
| write_register (argreg++, regval); |
| |
| /* Write the high word of the double to the odd register(s). */ |
| regval = extract_unsigned_integer (val + 4 - low_offset, 4); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, 4)); |
| write_register (float_argreg++, regval); |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, 4)); |
| write_register (argreg++, regval); |
| } |
| else |
| { |
| /* This is a floating point value that fits entirely |
| in a single register. */ |
| /* On 32 bit ABI's the float_argreg is further adjusted |
| above to ensure that it is even register aligned. */ |
| LONGEST regval = extract_unsigned_integer (val, len); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - fpreg=%d val=%s", |
| float_argreg, phex (regval, len)); |
| write_register (float_argreg++, regval); |
| /* CAGNEY: 32 bit MIPS ABI's always reserve two FP |
| registers for each argument. The below is (my |
| guess) to ensure that the corresponding integer |
| register has reserved the same space. */ |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, phex (regval, len)); |
| write_register (argreg, regval); |
| argreg += FP_REGISTER_DOUBLE ? 1 : 2; |
| } |
| /* Reserve space for the FP register. */ |
| stack_offset += ROUND_UP (len, MIPS_STACK_ARGSIZE); |
| } |
| else |
| { |
| /* Copy the argument to general registers or the stack in |
| register-sized pieces. Large arguments are split between |
| registers and stack. */ |
| /* Note: structs whose size is not a multiple of MIPS_REGSIZE |
| are treated specially: Irix cc passes them in registers |
| where gcc sometimes puts them on the stack. For maximum |
| compatibility, we will put them in both places. */ |
| int odd_sized_struct = ((len > MIPS_SAVED_REGSIZE) && |
| (len % MIPS_SAVED_REGSIZE != 0)); |
| /* Structures should be aligned to eight bytes (even arg registers) |
| on MIPS_ABI_O32, if their first member has double precision. */ |
| if (MIPS_SAVED_REGSIZE < 8 |
| && mips_type_needs_double_align (arg_type)) |
| { |
| if ((argreg & 1)) |
| argreg++; |
| } |
| /* Note: Floating-point values that didn't fit into an FP |
| register are only written to memory. */ |
| while (len > 0) |
| { |
| /* Remember if the argument was written to the stack. */ |
| int stack_used_p = 0; |
| int partial_len = |
| len < MIPS_SAVED_REGSIZE ? len : MIPS_SAVED_REGSIZE; |
| |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, " -- partial=%d", |
| partial_len); |
| |
| /* Write this portion of the argument to the stack. */ |
| if (argreg > MIPS_LAST_ARG_REGNUM |
| || odd_sized_struct |
| || fp_register_arg_p (typecode, arg_type)) |
| { |
| /* Should shorter than int integer values be |
| promoted to int before being stored? */ |
| int longword_offset = 0; |
| CORE_ADDR addr; |
| stack_used_p = 1; |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| if (MIPS_STACK_ARGSIZE == 8 && |
| (typecode == TYPE_CODE_INT || |
| typecode == TYPE_CODE_PTR || |
| typecode == TYPE_CODE_FLT) && len <= 4) |
| longword_offset = MIPS_STACK_ARGSIZE - len; |
| } |
| |
| if (mips_debug) |
| { |
| fprintf_unfiltered (gdb_stdlog, " - stack_offset=0x%s", |
| paddr_nz (stack_offset)); |
| fprintf_unfiltered (gdb_stdlog, " longword_offset=0x%s", |
| paddr_nz (longword_offset)); |
| } |
| |
| addr = sp + stack_offset + longword_offset; |
| |
| if (mips_debug) |
| { |
| int i; |
| fprintf_unfiltered (gdb_stdlog, " @0x%s ", |
| paddr_nz (addr)); |
| for (i = 0; i < partial_len; i++) |
| { |
| fprintf_unfiltered (gdb_stdlog, "%02x", |
| val[i] & 0xff); |
| } |
| } |
| write_memory (addr, val, partial_len); |
| } |
| |
| /* Note!!! This is NOT an else clause. Odd sized |
| structs may go thru BOTH paths. Floating point |
| arguments will not. */ |
| /* Write this portion of the argument to a general |
| purpose register. */ |
| if (argreg <= MIPS_LAST_ARG_REGNUM |
| && !fp_register_arg_p (typecode, arg_type)) |
| { |
| LONGEST regval = extract_signed_integer (val, partial_len); |
| /* Value may need to be sign extended, because |
| MIPS_REGSIZE != MIPS_SAVED_REGSIZE. */ |
| |
| /* A non-floating-point argument being passed in a |
| general register. If a struct or union, and if |
| the remaining length is smaller than the register |
| size, we have to adjust the register value on |
| big endian targets. |
| |
| It does not seem to be necessary to do the |
| same for integral types. |
| |
| Also don't do this adjustment on O64 binaries. |
| |
| cagney/2001-07-23: gdb/179: Also, GCC, when |
| outputting LE O32 with sizeof (struct) < |
| MIPS_SAVED_REGSIZE, generates a left shift as |
| part of storing the argument in a register a |
| register (the left shift isn't generated when |
| sizeof (struct) >= MIPS_SAVED_REGSIZE). Since it |
| is quite possible that this is GCC contradicting |
| the LE/O32 ABI, GDB has not been adjusted to |
| accommodate this. Either someone needs to |
| demonstrate that the LE/O32 ABI specifies such a |
| left shift OR this new ABI gets identified as |
| such and GDB gets tweaked accordingly. */ |
| |
| if (MIPS_SAVED_REGSIZE < 8 |
| && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && partial_len < MIPS_SAVED_REGSIZE |
| && (typecode == TYPE_CODE_STRUCT || |
| typecode == TYPE_CODE_UNION)) |
| regval <<= ((MIPS_SAVED_REGSIZE - partial_len) * |
| TARGET_CHAR_BIT); |
| |
| if (mips_debug) |
| fprintf_filtered (gdb_stdlog, " - reg=%d val=%s", |
| argreg, |
| phex (regval, MIPS_SAVED_REGSIZE)); |
| write_register (argreg, regval); |
| argreg++; |
| |
| /* Prevent subsequent floating point arguments from |
| being passed in floating point registers. */ |
| float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1; |
| } |
| |
| len -= partial_len; |
| val += partial_len; |
| |
| /* Compute the the offset into the stack at which we |
| will copy the next parameter. |
| |
| In older ABIs, the caller reserved space for |
| registers that contained arguments. This was loosely |
| refered to as their "home". Consequently, space is |
| always allocated. */ |
| |
| stack_offset += ROUND_UP (partial_len, MIPS_STACK_ARGSIZE); |
| } |
| } |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stdlog, "\n"); |
| } |
| |
| /* Return adjusted stack pointer. */ |
| return sp; |
| } |
| |
| static CORE_ADDR |
| mips_push_return_address (CORE_ADDR pc, CORE_ADDR sp) |
| { |
| /* Set the return address register to point to the entry |
| point of the program, where a breakpoint lies in wait. */ |
| write_register (RA_REGNUM, CALL_DUMMY_ADDRESS ()); |
| return sp; |
| } |
| |
| static void |
| mips_push_register (CORE_ADDR * sp, int regno) |
| { |
| char *buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| int regsize; |
| int offset; |
| if (MIPS_SAVED_REGSIZE < REGISTER_RAW_SIZE (regno)) |
| { |
| regsize = MIPS_SAVED_REGSIZE; |
| offset = (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| ? REGISTER_RAW_SIZE (regno) - MIPS_SAVED_REGSIZE |
| : 0); |
| } |
| else |
| { |
| regsize = REGISTER_RAW_SIZE (regno); |
| offset = 0; |
| } |
| *sp -= regsize; |
| deprecated_read_register_gen (regno, buffer); |
| write_memory (*sp, buffer + offset, regsize); |
| } |
| |
| /* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */ |
| #define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1)) |
| |
| static void |
| mips_push_dummy_frame (void) |
| { |
| int ireg; |
| struct linked_proc_info *link = (struct linked_proc_info *) |
| xmalloc (sizeof (struct linked_proc_info)); |
| mips_extra_func_info_t proc_desc = &link->info; |
| CORE_ADDR sp = ADDR_BITS_REMOVE (read_signed_register (SP_REGNUM)); |
| CORE_ADDR old_sp = sp; |
| link->next = linked_proc_desc_table; |
| linked_proc_desc_table = link; |
| |
| /* FIXME! are these correct ? */ |
| #define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */ |
| #define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1)) |
| #define FLOAT_REG_SAVE_MASK MASK(0,19) |
| #define FLOAT_SINGLE_REG_SAVE_MASK \ |
| ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0)) |
| /* |
| * The registers we must save are all those not preserved across |
| * procedure calls. Dest_Reg (see tm-mips.h) must also be saved. |
| * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI |
| * and FP Control/Status registers. |
| * |
| * |
| * Dummy frame layout: |
| * (high memory) |
| * Saved PC |
| * Saved MMHI, MMLO, FPC_CSR |
| * Saved R31 |
| * Saved R28 |
| * ... |
| * Saved R1 |
| * Saved D18 (i.e. F19, F18) |
| * ... |
| * Saved D0 (i.e. F1, F0) |
| * Argument build area and stack arguments written via mips_push_arguments |
| * (low memory) |
| */ |
| |
| /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */ |
| PROC_FRAME_REG (proc_desc) = PUSH_FP_REGNUM; |
| PROC_FRAME_OFFSET (proc_desc) = 0; |
| PROC_FRAME_ADJUST (proc_desc) = 0; |
| mips_push_register (&sp, PC_REGNUM); |
| mips_push_register (&sp, HI_REGNUM); |
| mips_push_register (&sp, LO_REGNUM); |
| mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM); |
| |
| /* Save general CPU registers */ |
| PROC_REG_MASK (proc_desc) = GEN_REG_SAVE_MASK; |
| /* PROC_REG_OFFSET is the offset of the first saved register from FP. */ |
| PROC_REG_OFFSET (proc_desc) = sp - old_sp - MIPS_SAVED_REGSIZE; |
| for (ireg = 32; --ireg >= 0;) |
| if (PROC_REG_MASK (proc_desc) & (1 << ireg)) |
| mips_push_register (&sp, ireg); |
| |
| /* Save floating point registers starting with high order word */ |
| PROC_FREG_MASK (proc_desc) = |
| MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK |
| : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0; |
| /* PROC_FREG_OFFSET is the offset of the first saved *double* register |
| from FP. */ |
| PROC_FREG_OFFSET (proc_desc) = sp - old_sp - 8; |
| for (ireg = 32; --ireg >= 0;) |
| if (PROC_FREG_MASK (proc_desc) & (1 << ireg)) |
| mips_push_register (&sp, ireg + FP0_REGNUM); |
| |
| /* Update the frame pointer for the call dummy and the stack pointer. |
| Set the procedure's starting and ending addresses to point to the |
| call dummy address at the entry point. */ |
| write_register (PUSH_FP_REGNUM, old_sp); |
| write_register (SP_REGNUM, sp); |
| PROC_LOW_ADDR (proc_desc) = CALL_DUMMY_ADDRESS (); |
| PROC_HIGH_ADDR (proc_desc) = CALL_DUMMY_ADDRESS () + 4; |
| SET_PROC_DESC_IS_DUMMY (proc_desc); |
| PROC_PC_REG (proc_desc) = RA_REGNUM; |
| } |
| |
| static void |
| mips_pop_frame (void) |
| { |
| register int regnum; |
| struct frame_info *frame = get_current_frame (); |
| CORE_ADDR new_sp = get_frame_base (frame); |
| mips_extra_func_info_t proc_desc = get_frame_extra_info (frame)->proc_desc; |
| |
| if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame), 0, 0)) |
| { |
| generic_pop_dummy_frame (); |
| flush_cached_frames (); |
| return; |
| } |
| |
| write_register (PC_REGNUM, DEPRECATED_FRAME_SAVED_PC (frame)); |
| if (get_frame_saved_regs (frame) == NULL) |
| DEPRECATED_FRAME_INIT_SAVED_REGS (frame); |
| for (regnum = 0; regnum < NUM_REGS; regnum++) |
| if (regnum != SP_REGNUM && regnum != PC_REGNUM |
| && get_frame_saved_regs (frame)[regnum]) |
| { |
| /* Floating point registers must not be sign extended, |
| in case MIPS_SAVED_REGSIZE = 4 but sizeof (FP0_REGNUM) == 8. */ |
| |
| if (FP0_REGNUM <= regnum && regnum < FP0_REGNUM + 32) |
| write_register (regnum, |
| read_memory_unsigned_integer (get_frame_saved_regs (frame)[regnum], |
| MIPS_SAVED_REGSIZE)); |
| else |
| write_register (regnum, |
| read_memory_integer (get_frame_saved_regs (frame)[regnum], |
| MIPS_SAVED_REGSIZE)); |
| } |
| |
| write_register (SP_REGNUM, new_sp); |
| flush_cached_frames (); |
| |
| if (proc_desc && PROC_DESC_IS_DUMMY (proc_desc)) |
| { |
| struct linked_proc_info *pi_ptr, *prev_ptr; |
| |
| for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL; |
| pi_ptr != NULL; |
| prev_ptr = pi_ptr, pi_ptr = pi_ptr->next) |
| { |
| if (&pi_ptr->info == proc_desc) |
| break; |
| } |
| |
| if (pi_ptr == NULL) |
| error ("Can't locate dummy extra frame info\n"); |
| |
| if (prev_ptr != NULL) |
| prev_ptr->next = pi_ptr->next; |
| else |
| linked_proc_desc_table = pi_ptr->next; |
| |
| xfree (pi_ptr); |
| |
| write_register (HI_REGNUM, |
| read_memory_integer (new_sp - 2 * MIPS_SAVED_REGSIZE, |
| MIPS_SAVED_REGSIZE)); |
| write_register (LO_REGNUM, |
| read_memory_integer (new_sp - 3 * MIPS_SAVED_REGSIZE, |
| MIPS_SAVED_REGSIZE)); |
| if (MIPS_FPU_TYPE != MIPS_FPU_NONE) |
| write_register (FCRCS_REGNUM, |
| read_memory_integer (new_sp - 4 * MIPS_SAVED_REGSIZE, |
| MIPS_SAVED_REGSIZE)); |
| } |
| } |
| |
| static void |
| mips_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, |
| struct value **args, struct type *type, int gcc_p) |
| { |
| write_register(T9_REGNUM, fun); |
| } |
| |
| /* Floating point register management. |
| |
| Background: MIPS1 & 2 fp registers are 32 bits wide. To support |
| 64bit operations, these early MIPS cpus treat fp register pairs |
| (f0,f1) as a single register (d0). Later MIPS cpu's have 64 bit fp |
| registers and offer a compatibility mode that emulates the MIPS2 fp |
| model. When operating in MIPS2 fp compat mode, later cpu's split |
| double precision floats into two 32-bit chunks and store them in |
| consecutive fp regs. To display 64-bit floats stored in this |
| fashion, we have to combine 32 bits from f0 and 32 bits from f1. |
| Throw in user-configurable endianness and you have a real mess. |
| |
| The way this works is: |
| - If we are in 32-bit mode or on a 32-bit processor, then a 64-bit |
| double-precision value will be split across two logical registers. |
| The lower-numbered logical register will hold the low-order bits, |
| regardless of the processor's endianness. |
| - If we are on a 64-bit processor, and we are looking for a |
| single-precision value, it will be in the low ordered bits |
| of a 64-bit GPR (after mfc1, for example) or a 64-bit register |
| save slot in memory. |
| - If we are in 64-bit mode, everything is straightforward. |
| |
| Note that this code only deals with "live" registers at the top of the |
| stack. We will attempt to deal with saved registers later, when |
| the raw/cooked register interface is in place. (We need a general |
| interface that can deal with dynamic saved register sizes -- fp |
| regs could be 32 bits wide in one frame and 64 on the frame above |
| and below). */ |
| |
| static struct type * |
| mips_float_register_type (void) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| return builtin_type_ieee_single_big; |
| else |
| return builtin_type_ieee_single_little; |
| } |
| |
| static struct type * |
| mips_double_register_type (void) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| return builtin_type_ieee_double_big; |
| else |
| return builtin_type_ieee_double_little; |
| } |
| |
| /* Copy a 32-bit single-precision value from the current frame |
| into rare_buffer. */ |
| |
| static void |
| mips_read_fp_register_single (int regno, char *rare_buffer) |
| { |
| int raw_size = REGISTER_RAW_SIZE (regno); |
| char *raw_buffer = alloca (raw_size); |
| |
| if (!frame_register_read (deprecated_selected_frame, regno, raw_buffer)) |
| error ("can't read register %d (%s)", regno, REGISTER_NAME (regno)); |
| if (raw_size == 8) |
| { |
| /* We have a 64-bit value for this register. Find the low-order |
| 32 bits. */ |
| int offset; |
| |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| offset = 4; |
| else |
| offset = 0; |
| |
| memcpy (rare_buffer, raw_buffer + offset, 4); |
| } |
| else |
| { |
| memcpy (rare_buffer, raw_buffer, 4); |
| } |
| } |
| |
| /* Copy a 64-bit double-precision value from the current frame into |
| rare_buffer. This may include getting half of it from the next |
| register. */ |
| |
| static void |
| mips_read_fp_register_double (int regno, char *rare_buffer) |
| { |
| int raw_size = REGISTER_RAW_SIZE (regno); |
| |
| if (raw_size == 8 && !mips2_fp_compat ()) |
| { |
| /* We have a 64-bit value for this register, and we should use |
| all 64 bits. */ |
| if (!frame_register_read (deprecated_selected_frame, regno, rare_buffer)) |
| error ("can't read register %d (%s)", regno, REGISTER_NAME (regno)); |
| } |
| else |
| { |
| if ((regno - FP0_REGNUM) & 1) |
| internal_error (__FILE__, __LINE__, |
| "mips_read_fp_register_double: bad access to " |
| "odd-numbered FP register"); |
| |
| /* mips_read_fp_register_single will find the correct 32 bits from |
| each register. */ |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| mips_read_fp_register_single (regno, rare_buffer + 4); |
| mips_read_fp_register_single (regno + 1, rare_buffer); |
| } |
| else |
| { |
| mips_read_fp_register_single (regno, rare_buffer); |
| mips_read_fp_register_single (regno + 1, rare_buffer + 4); |
| } |
| } |
| } |
| |
| static void |
| mips_print_register (int regnum, int all) |
| { |
| char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| |
| /* Get the data in raw format. */ |
| if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer)) |
| { |
| printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum)); |
| return; |
| } |
| |
| /* If we have a actual 32-bit floating point register (or we are in |
| 32-bit compatibility mode), and the register is even-numbered, |
| also print it as a double (spanning two registers). */ |
| if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT |
| && (REGISTER_RAW_SIZE (regnum) == 4 |
| || mips2_fp_compat ()) |
| && !((regnum - FP0_REGNUM) & 1)) |
| { |
| char *dbuffer = alloca (2 * MAX_REGISTER_RAW_SIZE); |
| |
| mips_read_fp_register_double (regnum, dbuffer); |
| |
| printf_filtered ("(d%d: ", regnum - FP0_REGNUM); |
| val_print (mips_double_register_type (), dbuffer, 0, 0, |
| gdb_stdout, 0, 1, 0, Val_pretty_default); |
| printf_filtered ("); "); |
| } |
| fputs_filtered (REGISTER_NAME (regnum), gdb_stdout); |
| |
| /* The problem with printing numeric register names (r26, etc.) is that |
| the user can't use them on input. Probably the best solution is to |
| fix it so that either the numeric or the funky (a2, etc.) names |
| are accepted on input. */ |
| if (regnum < MIPS_NUMREGS) |
| printf_filtered ("(r%d): ", regnum); |
| else |
| printf_filtered (": "); |
| |
| /* If virtual format is floating, print it that way. */ |
| if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT) |
| if (REGISTER_RAW_SIZE (regnum) == 8 && !mips2_fp_compat ()) |
| { |
| /* We have a meaningful 64-bit value in this register. Show |
| it as a 32-bit float and a 64-bit double. */ |
| int offset = 4 * (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG); |
| |
| printf_filtered (" (float) "); |
| val_print (mips_float_register_type (), raw_buffer + offset, 0, 0, |
| gdb_stdout, 0, 1, 0, Val_pretty_default); |
| printf_filtered (", (double) "); |
| val_print (mips_double_register_type (), raw_buffer, 0, 0, |
| gdb_stdout, 0, 1, 0, Val_pretty_default); |
| } |
| else |
| val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0, |
| gdb_stdout, 0, 1, 0, Val_pretty_default); |
| /* Else print as integer in hex. */ |
| else |
| { |
| int offset; |
| |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| offset = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum); |
| else |
| offset = 0; |
| |
| print_scalar_formatted (raw_buffer + offset, |
| REGISTER_VIRTUAL_TYPE (regnum), |
| 'x', 0, gdb_stdout); |
| } |
| } |
| |
| /* Replacement for generic do_registers_info. |
| Print regs in pretty columns. */ |
| |
| static int |
| do_fp_register_row (int regnum) |
| { /* do values for FP (float) regs */ |
| char *raw_buffer; |
| double doub, flt1, flt2; /* doubles extracted from raw hex data */ |
| int inv1, inv2, inv3; |
| |
| raw_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM)); |
| |
| if (REGISTER_RAW_SIZE (regnum) == 4 || mips2_fp_compat ()) |
| { |
| /* 4-byte registers: we can fit two registers per row. */ |
| /* Also print every pair of 4-byte regs as an 8-byte double. */ |
| mips_read_fp_register_single (regnum, raw_buffer); |
| flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1); |
| |
| mips_read_fp_register_single (regnum + 1, raw_buffer); |
| flt2 = unpack_double (mips_float_register_type (), raw_buffer, &inv2); |
| |
| mips_read_fp_register_double (regnum, raw_buffer); |
| doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3); |
| |
| printf_filtered (" %-5s", REGISTER_NAME (regnum)); |
| if (inv1) |
| printf_filtered (": <invalid float>"); |
| else |
| printf_filtered ("%-17.9g", flt1); |
| |
| printf_filtered (" %-5s", REGISTER_NAME (regnum + 1)); |
| if (inv2) |
| printf_filtered (": <invalid float>"); |
| else |
| printf_filtered ("%-17.9g", flt2); |
| |
| printf_filtered (" dbl: "); |
| if (inv3) |
| printf_filtered ("<invalid double>"); |
| else |
| printf_filtered ("%-24.17g", doub); |
| printf_filtered ("\n"); |
| |
| /* may want to do hex display here (future enhancement) */ |
| regnum += 2; |
| } |
| else |
| { |
| /* Eight byte registers: print each one as float AND as double. */ |
| mips_read_fp_register_single (regnum, raw_buffer); |
| flt1 = unpack_double (mips_float_register_type (), raw_buffer, &inv1); |
| |
| mips_read_fp_register_double (regnum, raw_buffer); |
| doub = unpack_double (mips_double_register_type (), raw_buffer, &inv3); |
| |
| printf_filtered (" %-5s: ", REGISTER_NAME (regnum)); |
| if (inv1) |
| printf_filtered ("<invalid float>"); |
| else |
| printf_filtered ("flt: %-17.9g", flt1); |
| |
| printf_filtered (" dbl: "); |
| if (inv3) |
| printf_filtered ("<invalid double>"); |
| else |
| printf_filtered ("%-24.17g", doub); |
| |
| printf_filtered ("\n"); |
| /* may want to do hex display here (future enhancement) */ |
| regnum++; |
| } |
| return regnum; |
| } |
| |
| /* Print a row's worth of GP (int) registers, with name labels above */ |
| |
| static int |
| do_gp_register_row (int regnum) |
| { |
| /* do values for GP (int) regs */ |
| char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| int ncols = (MIPS_REGSIZE == 8 ? 4 : 8); /* display cols per row */ |
| int col, byte; |
| int start_regnum = regnum; |
| int numregs = NUM_REGS; |
| |
| |
| /* For GP registers, we print a separate row of names above the vals */ |
| printf_filtered (" "); |
| for (col = 0; col < ncols && regnum < numregs; regnum++) |
| { |
| if (*REGISTER_NAME (regnum) == '\0') |
| continue; /* unused register */ |
| if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT) |
| break; /* end the row: reached FP register */ |
| printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s", |
| REGISTER_NAME (regnum)); |
| col++; |
| } |
| printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n ", |
| start_regnum); /* print the R0 to R31 names */ |
| |
| regnum = start_regnum; /* go back to start of row */ |
| /* now print the values in hex, 4 or 8 to the row */ |
| for (col = 0; col < ncols && regnum < numregs; regnum++) |
| { |
| if (*REGISTER_NAME (regnum) == '\0') |
| continue; /* unused register */ |
| if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT) |
| break; /* end row: reached FP register */ |
| /* OK: get the data in raw format. */ |
| if (!frame_register_read (deprecated_selected_frame, regnum, raw_buffer)) |
| error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum)); |
| /* pad small registers */ |
| for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_VIRTUAL_SIZE (regnum)); byte++) |
| printf_filtered (" "); |
| /* Now print the register value in hex, endian order. */ |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum); |
| byte < REGISTER_RAW_SIZE (regnum); |
| byte++) |
| printf_filtered ("%02x", (unsigned char) raw_buffer[byte]); |
| else |
| for (byte = REGISTER_VIRTUAL_SIZE (regnum) - 1; |
| byte >= 0; |
| byte--) |
| printf_filtered ("%02x", (unsigned char) raw_buffer[byte]); |
| printf_filtered (" "); |
| col++; |
| } |
| if (col > 0) /* ie. if we actually printed anything... */ |
| printf_filtered ("\n"); |
| |
| return regnum; |
| } |
| |
| /* MIPS_DO_REGISTERS_INFO(): called by "info register" command */ |
| |
| static void |
| mips_do_registers_info (int regnum, int fpregs) |
| { |
| if (regnum != -1) /* do one specified register */ |
| { |
| if (*(REGISTER_NAME (regnum)) == '\0') |
| error ("Not a valid register for the current processor type"); |
| |
| mips_print_register (regnum, 0); |
| printf_filtered ("\n"); |
| } |
| else |
| /* do all (or most) registers */ |
| { |
| regnum = 0; |
| while (regnum < NUM_REGS) |
| { |
| if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT) |
| if (fpregs) /* true for "INFO ALL-REGISTERS" command */ |
| regnum = do_fp_register_row (regnum); /* FP regs */ |
| else |
| regnum += MIPS_NUMREGS; /* skip floating point regs */ |
| else |
| regnum = do_gp_register_row (regnum); /* GP (int) regs */ |
| } |
| } |
| } |
| |
| /* Is this a branch with a delay slot? */ |
| |
| static int is_delayed (unsigned long); |
| |
| static int |
| is_delayed (unsigned long insn) |
| { |
| int i; |
| for (i = 0; i < NUMOPCODES; ++i) |
| if (mips_opcodes[i].pinfo != INSN_MACRO |
| && (insn & mips_opcodes[i].mask) == mips_opcodes[i].match) |
| break; |
| return (i < NUMOPCODES |
| && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY |
| | INSN_COND_BRANCH_DELAY |
| | INSN_COND_BRANCH_LIKELY))); |
| } |
| |
| int |
| mips_step_skips_delay (CORE_ADDR pc) |
| { |
| char buf[MIPS_INSTLEN]; |
| |
| /* There is no branch delay slot on MIPS16. */ |
| if (pc_is_mips16 (pc)) |
| return 0; |
| |
| if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0) |
| /* If error reading memory, guess that it is not a delayed branch. */ |
| return 0; |
| return is_delayed ((unsigned long) extract_unsigned_integer (buf, MIPS_INSTLEN)); |
| } |
| |
| |
| /* Skip the PC past function prologue instructions (32-bit version). |
| This is a helper function for mips_skip_prologue. */ |
| |
| static CORE_ADDR |
| mips32_skip_prologue (CORE_ADDR pc) |
| { |
| t_inst inst; |
| CORE_ADDR end_pc; |
| int seen_sp_adjust = 0; |
| int load_immediate_bytes = 0; |
| |
| /* Skip the typical prologue instructions. These are the stack adjustment |
| instruction and the instructions that save registers on the stack |
| or in the gcc frame. */ |
| for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN) |
| { |
| unsigned long high_word; |
| |
| inst = mips_fetch_instruction (pc); |
| high_word = (inst >> 16) & 0xffff; |
| |
| if (high_word == 0x27bd /* addiu $sp,$sp,offset */ |
| || high_word == 0x67bd) /* daddiu $sp,$sp,offset */ |
| seen_sp_adjust = 1; |
| else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */ |
| inst == 0x03a8e823) /* subu $sp,$sp,$t0 */ |
| seen_sp_adjust = 1; |
| else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */ |
| || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */ |
| && (inst & 0x001F0000)) /* reg != $zero */ |
| continue; |
| |
| else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */ |
| continue; |
| else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000)) |
| /* sx reg,n($s8) */ |
| continue; /* reg != $zero */ |
| |
| /* move $s8,$sp. With different versions of gas this will be either |
| `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'. |
| Accept any one of these. */ |
| else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d) |
| continue; |
| |
| else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */ |
| continue; |
| else if (high_word == 0x3c1c) /* lui $gp,n */ |
| continue; |
| else if (high_word == 0x279c) /* addiu $gp,$gp,n */ |
| continue; |
| else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */ |
| || inst == 0x033ce021) /* addu $gp,$t9,$gp */ |
| continue; |
| /* The following instructions load $at or $t0 with an immediate |
| value in preparation for a stack adjustment via |
| subu $sp,$sp,[$at,$t0]. These instructions could also initialize |
| a local variable, so we accept them only before a stack adjustment |
| instruction was seen. */ |
| else if (!seen_sp_adjust) |
| { |
| if (high_word == 0x3c01 || /* lui $at,n */ |
| high_word == 0x3c08) /* lui $t0,n */ |
| { |
| load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */ |
| continue; |
| } |
| else if (high_word == 0x3421 || /* ori $at,$at,n */ |
| high_word == 0x3508 || /* ori $t0,$t0,n */ |
| high_word == 0x3401 || /* ori $at,$zero,n */ |
| high_word == 0x3408) /* ori $t0,$zero,n */ |
| { |
| load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */ |
| continue; |
| } |
| else |
| break; |
| } |
| else |
| break; |
| } |
| |
| /* In a frameless function, we might have incorrectly |
| skipped some load immediate instructions. Undo the skipping |
| if the load immediate was not followed by a stack adjustment. */ |
| if (load_immediate_bytes && !seen_sp_adjust) |
| pc -= load_immediate_bytes; |
| return pc; |
| } |
| |
| /* Skip the PC past function prologue instructions (16-bit version). |
| This is a helper function for mips_skip_prologue. */ |
| |
| static CORE_ADDR |
| mips16_skip_prologue (CORE_ADDR pc) |
| { |
| CORE_ADDR end_pc; |
| int extend_bytes = 0; |
| int prev_extend_bytes; |
| |
| /* Table of instructions likely to be found in a function prologue. */ |
| static struct |
| { |
| unsigned short inst; |
| unsigned short mask; |
| } |
| table[] = |
| { |
| { |
| 0x6300, 0xff00 |
| } |
| , /* addiu $sp,offset */ |
| { |
| 0xfb00, 0xff00 |
| } |
| , /* daddiu $sp,offset */ |
| { |
| 0xd000, 0xf800 |
| } |
| , /* sw reg,n($sp) */ |
| { |
| 0xf900, 0xff00 |
| } |
| , /* sd reg,n($sp) */ |
| { |
| 0x6200, 0xff00 |
| } |
| , /* sw $ra,n($sp) */ |
| { |
| 0xfa00, 0xff00 |
| } |
| , /* sd $ra,n($sp) */ |
| { |
| 0x673d, 0xffff |
| } |
| , /* move $s1,sp */ |
| { |
| 0xd980, 0xff80 |
| } |
| , /* sw $a0-$a3,n($s1) */ |
| { |
| 0x6704, 0xff1c |
| } |
| , /* move reg,$a0-$a3 */ |
| { |
| 0xe809, 0xf81f |
| } |
| , /* entry pseudo-op */ |
| { |
| 0x0100, 0xff00 |
| } |
| , /* addiu $s1,$sp,n */ |
| { |
| 0, 0 |
| } /* end of table marker */ |
| }; |
| |
| /* Skip the typical prologue instructions. These are the stack adjustment |
| instruction and the instructions that save registers on the stack |
| or in the gcc frame. */ |
| for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN) |
| { |
| unsigned short inst; |
| int i; |
| |
| inst = mips_fetch_instruction (pc); |
| |
| /* Normally we ignore an extend instruction. However, if it is |
| not followed by a valid prologue instruction, we must adjust |
| the pc back over the extend so that it won't be considered |
| part of the prologue. */ |
| if ((inst & 0xf800) == 0xf000) /* extend */ |
| { |
| extend_bytes = MIPS16_INSTLEN; |
| continue; |
| } |
| prev_extend_bytes = extend_bytes; |
| extend_bytes = 0; |
| |
| /* Check for other valid prologue instructions besides extend. */ |
| for (i = 0; table[i].mask != 0; i++) |
| if ((inst & table[i].mask) == table[i].inst) /* found, get out */ |
| break; |
| if (table[i].mask != 0) /* it was in table? */ |
| continue; /* ignore it */ |
| else |
| /* non-prologue */ |
| { |
| /* Return the current pc, adjusted backwards by 2 if |
| the previous instruction was an extend. */ |
| return pc - prev_extend_bytes; |
| } |
| } |
| return pc; |
| } |
| |
| /* To skip prologues, I use this predicate. Returns either PC itself |
| if the code at PC does not look like a function prologue; otherwise |
| returns an address that (if we're lucky) follows the prologue. If |
| LENIENT, then we must skip everything which is involved in setting |
| up the frame (it's OK to skip more, just so long as we don't skip |
| anything which might clobber the registers which are being saved. |
| We must skip more in the case where part of the prologue is in the |
| delay slot of a non-prologue instruction). */ |
| |
| static CORE_ADDR |
| mips_skip_prologue (CORE_ADDR pc) |
| { |
| /* See if we can determine the end of the prologue via the symbol table. |
| If so, then return either PC, or the PC after the prologue, whichever |
| is greater. */ |
| |
| CORE_ADDR post_prologue_pc = after_prologue (pc, NULL); |
| |
| if (post_prologue_pc != 0) |
| return max (pc, post_prologue_pc); |
| |
| /* Can't determine prologue from the symbol table, need to examine |
| instructions. */ |
| |
| if (pc_is_mips16 (pc)) |
| return mips16_skip_prologue (pc); |
| else |
| return mips32_skip_prologue (pc); |
| } |
| |
| /* Determine how a return value is stored within the MIPS register |
| file, given the return type `valtype'. */ |
| |
| struct return_value_word |
| { |
| int len; |
| int reg; |
| int reg_offset; |
| int buf_offset; |
| }; |
| |
| static void |
| return_value_location (struct type *valtype, |
| struct return_value_word *hi, |
| struct return_value_word *lo) |
| { |
| int len = TYPE_LENGTH (valtype); |
| |
| if (TYPE_CODE (valtype) == TYPE_CODE_FLT |
| && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8)) |
| || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4))) |
| { |
| if (!FP_REGISTER_DOUBLE && len == 8) |
| { |
| /* We need to break a 64bit float in two 32 bit halves and |
| spread them across a floating-point register pair. */ |
| lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0; |
| hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4; |
| lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && REGISTER_RAW_SIZE (FP0_REGNUM) == 8) |
| ? 4 : 0); |
| hi->reg_offset = lo->reg_offset; |
| lo->reg = FP0_REGNUM + 0; |
| hi->reg = FP0_REGNUM + 1; |
| lo->len = 4; |
| hi->len = 4; |
| } |
| else |
| { |
| /* The floating point value fits in a single floating-point |
| register. */ |
| lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && REGISTER_RAW_SIZE (FP0_REGNUM) == 8 |
| && len == 4) |
| ? 4 : 0); |
| lo->reg = FP0_REGNUM; |
| lo->len = len; |
| lo->buf_offset = 0; |
| hi->len = 0; |
| hi->reg_offset = 0; |
| hi->buf_offset = 0; |
| hi->reg = 0; |
| } |
| } |
| else |
| { |
| /* Locate a result possibly spread across two registers. */ |
| int regnum = 2; |
| lo->reg = regnum + 0; |
| hi->reg = regnum + 1; |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && len < MIPS_SAVED_REGSIZE) |
| { |
| /* "un-left-justify" the value in the low register */ |
| lo->reg_offset = MIPS_SAVED_REGSIZE - len; |
| lo->len = len; |
| hi->reg_offset = 0; |
| hi->len = 0; |
| } |
| else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && len > MIPS_SAVED_REGSIZE /* odd-size structs */ |
| && len < MIPS_SAVED_REGSIZE * 2 |
| && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT || |
| TYPE_CODE (valtype) == TYPE_CODE_UNION)) |
| { |
| /* "un-left-justify" the value spread across two registers. */ |
| lo->reg_offset = 2 * MIPS_SAVED_REGSIZE - len; |
| lo->len = MIPS_SAVED_REGSIZE - lo->reg_offset; |
| hi->reg_offset = 0; |
| hi->len = len - lo->len; |
| } |
| else |
| { |
| /* Only perform a partial copy of the second register. */ |
| lo->reg_offset = 0; |
| hi->reg_offset = 0; |
| if (len > MIPS_SAVED_REGSIZE) |
| { |
| lo->len = MIPS_SAVED_REGSIZE; |
| hi->len = len - MIPS_SAVED_REGSIZE; |
| } |
| else |
| { |
| lo->len = len; |
| hi->len = 0; |
| } |
| } |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| && REGISTER_RAW_SIZE (regnum) == 8 |
| && MIPS_SAVED_REGSIZE == 4) |
| { |
| /* Account for the fact that only the least-signficant part |
| of the register is being used */ |
| lo->reg_offset += 4; |
| hi->reg_offset += 4; |
| } |
| lo->buf_offset = 0; |
| hi->buf_offset = lo->len; |
| } |
| } |
| |
| /* Given a return value in `regbuf' with a type `valtype', extract and |
| copy its value into `valbuf'. */ |
| |
| static void |
| mips_eabi_extract_return_value (struct type *valtype, |
| char regbuf[REGISTER_BYTES], |
| char *valbuf) |
| { |
| struct return_value_word lo; |
| struct return_value_word hi; |
| return_value_location (valtype, &hi, &lo); |
| |
| memcpy (valbuf + lo.buf_offset, |
| regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset, |
| lo.len); |
| |
| if (hi.len > 0) |
| memcpy (valbuf + hi.buf_offset, |
| regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset, |
| hi.len); |
| } |
| |
| static void |
| mips_o64_extract_return_value (struct type *valtype, |
| char regbuf[REGISTER_BYTES], |
| char *valbuf) |
| { |
| struct return_value_word lo; |
| struct return_value_word hi; |
| return_value_location (valtype, &hi, &lo); |
| |
| memcpy (valbuf + lo.buf_offset, |
| regbuf + REGISTER_BYTE (lo.reg) + lo.reg_offset, |
| lo.len); |
| |
| if (hi.len > 0) |
| memcpy (valbuf + hi.buf_offset, |
| regbuf + REGISTER_BYTE (hi.reg) + hi.reg_offset, |
| hi.len); |
| } |
| |
| /* Given a return value in `valbuf' with a type `valtype', write it's |
| value into the appropriate register. */ |
| |
| static void |
| mips_eabi_store_return_value (struct type *valtype, char *valbuf) |
| { |
| char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| struct return_value_word lo; |
| struct return_value_word hi; |
| return_value_location (valtype, &hi, &lo); |
| |
| memset (raw_buffer, 0, sizeof (raw_buffer)); |
| memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len); |
| deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer, |
| REGISTER_RAW_SIZE (lo.reg)); |
| |
| if (hi.len > 0) |
| { |
| memset (raw_buffer, 0, sizeof (raw_buffer)); |
| memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len); |
| deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer, |
| REGISTER_RAW_SIZE (hi.reg)); |
| } |
| } |
| |
| static void |
| mips_o64_store_return_value (struct type *valtype, char *valbuf) |
| { |
| char *raw_buffer = alloca (MAX_REGISTER_RAW_SIZE); |
| struct return_value_word lo; |
| struct return_value_word hi; |
| return_value_location (valtype, &hi, &lo); |
| |
| memset (raw_buffer, 0, sizeof (raw_buffer)); |
| memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len); |
| deprecated_write_register_bytes (REGISTER_BYTE (lo.reg), raw_buffer, |
| REGISTER_RAW_SIZE (lo.reg)); |
| |
| if (hi.len > 0) |
| { |
| memset (raw_buffer, 0, sizeof (raw_buffer)); |
| memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len); |
| deprecated_write_register_bytes (REGISTER_BYTE (hi.reg), raw_buffer, |
| REGISTER_RAW_SIZE (hi.reg)); |
| } |
| } |
| |
| /* O32 ABI stuff. */ |
| |
| static void |
| mips_o32_xfer_return_value (struct type *type, |
| struct regcache *regcache, |
| bfd_byte *in, const bfd_byte *out) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| if (TYPE_CODE (type) == TYPE_CODE_FLT |
| && TYPE_LENGTH (type) == 4 |
| && tdep->mips_fpu_type != MIPS_FPU_NONE) |
| { |
| /* A single-precision floating-point value. It fits in the |
| least significant part of FP0. */ |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n"); |
| mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type), |
| TARGET_BYTE_ORDER, in, out, 0); |
| } |
| else if (TYPE_CODE (type) == TYPE_CODE_FLT |
| && TYPE_LENGTH (type) == 8 |
| && tdep->mips_fpu_type != MIPS_FPU_NONE) |
| { |
| /* A double-precision floating-point value. It fits in the |
| least significant part of FP0/FP1 but with byte ordering |
| based on the target (???). */ |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return float in $fp0/$fp1\n"); |
| switch (TARGET_BYTE_ORDER) |
| { |
| case BFD_ENDIAN_LITTLE: |
| mips_xfer_register (regcache, FP0_REGNUM + 0, 4, |
| TARGET_BYTE_ORDER, in, out, 0); |
| mips_xfer_register (regcache, FP0_REGNUM + 1, 4, |
| TARGET_BYTE_ORDER, in, out, 4); |
| break; |
| case BFD_ENDIAN_BIG: |
| mips_xfer_register (regcache, FP0_REGNUM + 1, 4, |
| TARGET_BYTE_ORDER, in, out, 0); |
| mips_xfer_register (regcache, FP0_REGNUM + 0, 4, |
| TARGET_BYTE_ORDER, in, out, 4); |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, "bad switch"); |
| } |
| } |
| #if 0 |
| else if (TYPE_CODE (type) == TYPE_CODE_STRUCT |
| && TYPE_NFIELDS (type) <= 2 |
| && TYPE_NFIELDS (type) >= 1 |
| && ((TYPE_NFIELDS (type) == 1 |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0)) |
| == TYPE_CODE_FLT)) |
| || (TYPE_NFIELDS (type) == 2 |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0)) |
| == TYPE_CODE_FLT) |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1)) |
| == TYPE_CODE_FLT))) |
| && tdep->mips_fpu_type != MIPS_FPU_NONE) |
| { |
| /* A struct that contains one or two floats. Each value is part |
| in the least significant part of their floating point |
| register.. */ |
| bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE); |
| int regnum; |
| int field; |
| for (field = 0, regnum = FP0_REGNUM; |
| field < TYPE_NFIELDS (type); |
| field++, regnum += 2) |
| { |
| int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field]) |
| / TARGET_CHAR_BIT); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset); |
| mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)), |
| TARGET_BYTE_ORDER, in, out, offset); |
| } |
| } |
| #endif |
| #if 0 |
| else if (TYPE_CODE (type) == TYPE_CODE_STRUCT |
| || TYPE_CODE (type) == TYPE_CODE_UNION) |
| { |
| /* A structure or union. Extract the left justified value, |
| regardless of the byte order. I.e. DO NOT USE |
| mips_xfer_lower. */ |
| int offset; |
| int regnum; |
| for (offset = 0, regnum = V0_REGNUM; |
| offset < TYPE_LENGTH (type); |
| offset += REGISTER_RAW_SIZE (regnum), regnum++) |
| { |
| int xfer = REGISTER_RAW_SIZE (regnum); |
| if (offset + xfer > TYPE_LENGTH (type)) |
| xfer = TYPE_LENGTH (type) - offset; |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n", |
| offset, xfer, regnum); |
| mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN, |
| in, out, offset); |
| } |
| } |
| #endif |
| else |
| { |
| /* A scalar extract each part but least-significant-byte |
| justified. o32 thinks registers are 4 byte, regardless of |
| the ISA. mips_stack_argsize controls this. */ |
| int offset; |
| int regnum; |
| for (offset = 0, regnum = V0_REGNUM; |
| offset < TYPE_LENGTH (type); |
| offset += mips_stack_argsize (), regnum++) |
| { |
| int xfer = mips_stack_argsize (); |
| int pos = 0; |
| if (offset + xfer > TYPE_LENGTH (type)) |
| xfer = TYPE_LENGTH (type) - offset; |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n", |
| offset, xfer, regnum); |
| mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER, |
| in, out, offset); |
| } |
| } |
| } |
| |
| static void |
| mips_o32_extract_return_value (struct type *type, |
| struct regcache *regcache, |
| void *valbuf) |
| { |
| mips_o32_xfer_return_value (type, regcache, valbuf, NULL); |
| } |
| |
| static void |
| mips_o32_store_return_value (struct type *type, char *valbuf) |
| { |
| mips_o32_xfer_return_value (type, current_regcache, NULL, valbuf); |
| } |
| |
| /* N32/N44 ABI stuff. */ |
| |
| static void |
| mips_n32n64_xfer_return_value (struct type *type, |
| struct regcache *regcache, |
| bfd_byte *in, const bfd_byte *out) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| if (TYPE_CODE (type) == TYPE_CODE_FLT |
| && tdep->mips_fpu_type != MIPS_FPU_NONE) |
| { |
| /* A floating-point value belongs in the least significant part |
| of FP0. */ |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return float in $fp0\n"); |
| mips_xfer_register (regcache, FP0_REGNUM, TYPE_LENGTH (type), |
| TARGET_BYTE_ORDER, in, out, 0); |
| } |
| else if (TYPE_CODE (type) == TYPE_CODE_STRUCT |
| && TYPE_NFIELDS (type) <= 2 |
| && TYPE_NFIELDS (type) >= 1 |
| && ((TYPE_NFIELDS (type) == 1 |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0)) |
| == TYPE_CODE_FLT)) |
| || (TYPE_NFIELDS (type) == 2 |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 0)) |
| == TYPE_CODE_FLT) |
| && (TYPE_CODE (TYPE_FIELD_TYPE (type, 1)) |
| == TYPE_CODE_FLT))) |
| && tdep->mips_fpu_type != MIPS_FPU_NONE) |
| { |
| /* A struct that contains one or two floats. Each value is part |
| in the least significant part of their floating point |
| register.. */ |
| bfd_byte *reg = alloca (MAX_REGISTER_RAW_SIZE); |
| int regnum; |
| int field; |
| for (field = 0, regnum = FP0_REGNUM; |
| field < TYPE_NFIELDS (type); |
| field++, regnum += 2) |
| { |
| int offset = (FIELD_BITPOS (TYPE_FIELDS (type)[field]) |
| / TARGET_CHAR_BIT); |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return float struct+%d\n", offset); |
| mips_xfer_register (regcache, regnum, TYPE_LENGTH (TYPE_FIELD_TYPE (type, field)), |
| TARGET_BYTE_ORDER, in, out, offset); |
| } |
| } |
| else if (TYPE_CODE (type) == TYPE_CODE_STRUCT |
| || TYPE_CODE (type) == TYPE_CODE_UNION) |
| { |
| /* A structure or union. Extract the left justified value, |
| regardless of the byte order. I.e. DO NOT USE |
| mips_xfer_lower. */ |
| int offset; |
| int regnum; |
| for (offset = 0, regnum = V0_REGNUM; |
| offset < TYPE_LENGTH (type); |
| offset += REGISTER_RAW_SIZE (regnum), regnum++) |
| { |
| int xfer = REGISTER_RAW_SIZE (regnum); |
| if (offset + xfer > TYPE_LENGTH (type)) |
| xfer = TYPE_LENGTH (type) - offset; |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return struct+%d:%d in $%d\n", |
| offset, xfer, regnum); |
| mips_xfer_register (regcache, regnum, xfer, BFD_ENDIAN_UNKNOWN, |
| in, out, offset); |
| } |
| } |
| else |
| { |
| /* A scalar extract each part but least-significant-byte |
| justified. */ |
| int offset; |
| int regnum; |
| for (offset = 0, regnum = V0_REGNUM; |
| offset < TYPE_LENGTH (type); |
| offset += REGISTER_RAW_SIZE (regnum), regnum++) |
| { |
| int xfer = REGISTER_RAW_SIZE (regnum); |
| int pos = 0; |
| if (offset + xfer > TYPE_LENGTH (type)) |
| xfer = TYPE_LENGTH (type) - offset; |
| if (mips_debug) |
| fprintf_unfiltered (gdb_stderr, "Return scalar+%d:%d in $%d\n", |
| offset, xfer, regnum); |
| mips_xfer_register (regcache, regnum, xfer, TARGET_BYTE_ORDER, |
| in, out, offset); |
| } |
| } |
| } |
| |
| static void |
| mips_n32n64_extract_return_value (struct type *type, |
| struct regcache *regcache, |
| void *valbuf) |
| { |
| mips_n32n64_xfer_return_value (type, regcache, valbuf, NULL); |
| } |
| |
| static void |
| mips_n32n64_store_return_value (struct type *type, char *valbuf) |
| { |
| mips_n32n64_xfer_return_value (type, current_regcache, NULL, valbuf); |
| } |
| |
| static void |
| mips_store_struct_return (CORE_ADDR addr, CORE_ADDR sp) |
| { |
| /* Nothing to do -- push_arguments does all the work. */ |
| } |
| |
| static CORE_ADDR |
| mips_extract_struct_value_address (struct regcache *regcache) |
| { |
| /* FIXME: This will only work at random. The caller passes the |
| struct_return address in V0, but it is not preserved. It may |
| still be there, or this may be a random value. */ |
| LONGEST val; |
| |
| regcache_cooked_read_signed (regcache, V0_REGNUM, &val); |
| return val; |
| } |
| |
| /* Exported procedure: Is PC in the signal trampoline code */ |
| |
| static int |
| mips_pc_in_sigtramp (CORE_ADDR pc, char *ignore) |
| { |
| if (sigtramp_address == 0) |
| fixup_sigtramp (); |
| return (pc >= sigtramp_address && pc < sigtramp_end); |
| } |
| |
| /* Root of all "set mips "/"show mips " commands. This will eventually be |
| used for all MIPS-specific commands. */ |
| |
| static void |
| show_mips_command (char *args, int from_tty) |
| { |
| help_list (showmipscmdlist, "show mips ", all_commands, gdb_stdout); |
| } |
| |
| static void |
| set_mips_command (char *args, int from_tty) |
| { |
| printf_unfiltered ("\"set mips\" must be followed by an appropriate subcommand.\n"); |
| help_list (setmipscmdlist, "set mips ", all_commands, gdb_stdout); |
| } |
| |
| /* Commands to show/set the MIPS FPU type. */ |
| |
| static void |
| show_mipsfpu_command (char *args, int from_tty) |
| { |
| char *fpu; |
| switch (MIPS_FPU_TYPE) |
| { |
| case MIPS_FPU_SINGLE: |
| fpu = "single-precision"; |
| break; |
| case MIPS_FPU_DOUBLE: |
| fpu = "double-precision"; |
| break; |
| case MIPS_FPU_NONE: |
| fpu = "absent (none)"; |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, "bad switch"); |
| } |
| if (mips_fpu_type_auto) |
| printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n", |
| fpu); |
| else |
| printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n", |
| fpu); |
| } |
| |
| |
| static void |
| set_mipsfpu_command (char *args, int from_tty) |
| { |
| printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n"); |
| show_mipsfpu_command (args, from_tty); |
| } |
| |
| static void |
| set_mipsfpu_single_command (char *args, int from_tty) |
| { |
| mips_fpu_type = MIPS_FPU_SINGLE; |
| mips_fpu_type_auto = 0; |
| gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_SINGLE; |
| } |
| |
| static void |
| set_mipsfpu_double_command (char *args, int from_tty) |
| { |
| mips_fpu_type = MIPS_FPU_DOUBLE; |
| mips_fpu_type_auto = 0; |
| gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_DOUBLE; |
| } |
| |
| static void |
| set_mipsfpu_none_command (char *args, int from_tty) |
| { |
| mips_fpu_type = MIPS_FPU_NONE; |
| mips_fpu_type_auto = 0; |
| gdbarch_tdep (current_gdbarch)->mips_fpu_type = MIPS_FPU_NONE; |
| } |
| |
| static void |
| set_mipsfpu_auto_command (char *args, int from_tty) |
| { |
| mips_fpu_type_auto = 1; |
| } |
| |
| /* Command to set the processor type. */ |
| |
| void |
| mips_set_processor_type_command (char *args, int from_tty) |
| { |
| int i; |
| |
| if (tmp_mips_processor_type == NULL || *tmp_mips_processor_type == '\0') |
| { |
| printf_unfiltered ("The known MIPS processor types are as follows:\n\n"); |
| for (i = 0; mips_processor_type_table[i].name != NULL; ++i) |
| printf_unfiltered ("%s\n", mips_processor_type_table[i].name); |
| |
| /* Restore the value. */ |
| tmp_mips_processor_type = xstrdup (mips_processor_type); |
| |
| return; |
| } |
| |
| if (!mips_set_processor_type (tmp_mips_processor_type)) |
| { |
| error ("Unknown processor type `%s'.", tmp_mips_processor_type); |
| /* Restore its value. */ |
| tmp_mips_processor_type = xstrdup (mips_processor_type); |
| } |
| } |
| |
| static void |
| mips_show_processor_type_command (char *args, int from_tty) |
| { |
| } |
| |
| /* Modify the actual processor type. */ |
| |
| static int |
| mips_set_processor_type (char *str) |
| { |
| int i; |
| |
| if (str == NULL) |
| return 0; |
| |
| for (i = 0; mips_processor_type_table[i].name != NULL; ++i) |
| { |
| if (strcasecmp (str, mips_processor_type_table[i].name) == 0) |
| { |
| mips_processor_type = str; |
| mips_processor_reg_names = mips_processor_type_table[i].regnames; |
| return 1; |
| /* FIXME tweak fpu flag too */ |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Attempt to identify the particular processor model by reading the |
| processor id. */ |
| |
| char * |
| mips_read_processor_type (void) |
| { |
| CORE_ADDR prid; |
| |
| prid = read_register (PRID_REGNUM); |
| |
| if ((prid & ~0xf) == 0x700) |
| return savestring ("r3041", strlen ("r3041")); |
| |
| return NULL; |
| } |
| |
| /* Just like reinit_frame_cache, but with the right arguments to be |
| callable as an sfunc. */ |
| |
| static void |
| reinit_frame_cache_sfunc (char *args, int from_tty, |
| struct cmd_list_element *c) |
| { |
| reinit_frame_cache (); |
| } |
| |
| int |
| gdb_print_insn_mips (bfd_vma memaddr, disassemble_info *info) |
| { |
| mips_extra_func_info_t proc_desc; |
| |
| /* Search for the function containing this address. Set the low bit |
| of the address when searching, in case we were given an even address |
| that is the start of a 16-bit function. If we didn't do this, |
| the search would fail because the symbol table says the function |
| starts at an odd address, i.e. 1 byte past the given address. */ |
| memaddr = ADDR_BITS_REMOVE (memaddr); |
| proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL); |
| |
| /* Make an attempt to determine if this is a 16-bit function. If |
| the procedure descriptor exists and the address therein is odd, |
| it's definitely a 16-bit function. Otherwise, we have to just |
| guess that if the address passed in is odd, it's 16-bits. */ |
| if (proc_desc) |
| info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? |
| bfd_mach_mips16 : TM_PRINT_INSN_MACH; |
| else |
| info->mach = pc_is_mips16 (memaddr) ? |
| bfd_mach_mips16 : TM_PRINT_INSN_MACH; |
| |
| /* Round down the instruction address to the appropriate boundary. */ |
| memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3); |
| |
| /* Call the appropriate disassembler based on the target endian-ness. */ |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| return print_insn_big_mips (memaddr, info); |
| else |
| return print_insn_little_mips (memaddr, info); |
| } |
| |
| /* Old-style breakpoint macros. |
| The IDT board uses an unusual breakpoint value, and sometimes gets |
| confused when it sees the usual MIPS breakpoint instruction. */ |
| |
| #define BIG_BREAKPOINT {0, 0x5, 0, 0xd} |
| #define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0} |
| #define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd} |
| #define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0} |
| #define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd} |
| #define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0} |
| #define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5} |
| #define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8} |
| |
| /* This function implements the BREAKPOINT_FROM_PC macro. It uses the program |
| counter value to determine whether a 16- or 32-bit breakpoint should be |
| used. It returns a pointer to a string of bytes that encode a breakpoint |
| instruction, stores the length of the string to *lenptr, and adjusts pc |
| (if necessary) to point to the actual memory location where the |
| breakpoint should be inserted. */ |
| |
| static const unsigned char * |
| mips_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr) |
| { |
| if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| { |
| if (pc_is_mips16 (*pcptr)) |
| { |
| static unsigned char mips16_big_breakpoint[] = |
| MIPS16_BIG_BREAKPOINT; |
| *pcptr = UNMAKE_MIPS16_ADDR (*pcptr); |
| *lenptr = sizeof (mips16_big_breakpoint); |
| return mips16_big_breakpoint; |
| } |
| else |
| { |
| static unsigned char big_breakpoint[] = BIG_BREAKPOINT; |
| static unsigned char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT; |
| static unsigned char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT; |
| |
| *lenptr = sizeof (big_breakpoint); |
| |
| if (strcmp (target_shortname, "mips") == 0) |
| return idt_big_breakpoint; |
| else if (strcmp (target_shortname, "ddb") == 0 |
| || strcmp (target_shortname, "pmon") == 0 |
| || strcmp (target_shortname, "lsi") == 0) |
| return pmon_big_breakpoint; |
| else |
| return big_breakpoint; |
| } |
| } |
| else |
| { |
| if (pc_is_mips16 (*pcptr)) |
| { |
| static unsigned char mips16_little_breakpoint[] = |
| MIPS16_LITTLE_BREAKPOINT; |
| *pcptr = UNMAKE_MIPS16_ADDR (*pcptr); |
| *lenptr = sizeof (mips16_little_breakpoint); |
| return mips16_little_breakpoint; |
| } |
| else |
| { |
| static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT; |
| static unsigned char pmon_little_breakpoint[] = |
| PMON_LITTLE_BREAKPOINT; |
| static unsigned char idt_little_breakpoint[] = |
| IDT_LITTLE_BREAKPOINT; |
| |
| *lenptr = sizeof (little_breakpoint); |
| |
| if (strcmp (target_shortname, "mips") == 0) |
| return idt_little_breakpoint; |
| else if (strcmp (target_shortname, "ddb") == 0 |
| || strcmp (target_shortname, "pmon") == 0 |
| || strcmp (target_shortname, "lsi") == 0) |
| return pmon_little_breakpoint; |
| else |
| return little_breakpoint; |
| } |
| } |
| } |
| |
| /* If PC is in a mips16 call or return stub, return the address of the target |
| PC, which is either the callee or the caller. There are several |
| cases which must be handled: |
| |
| * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the |
| target PC is in $31 ($ra). |
| * If the PC is in __mips16_call_stub_{1..10}, this is a call stub |
| and the target PC is in $2. |
| * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e. |
| before the jal instruction, this is effectively a call stub |
| and the the target PC is in $2. Otherwise this is effectively |
| a return stub and the target PC is in $18. |
| |
| See the source code for the stubs in gcc/config/mips/mips16.S for |
| gory details. |
| |
| This function implements the SKIP_TRAMPOLINE_CODE macro. |
| */ |
| |
| static CORE_ADDR |
| mips_skip_stub (CORE_ADDR pc) |
| { |
| char *name; |
| CORE_ADDR start_addr; |
| |
| /* Find the starting address and name of the function containing the PC. */ |
| if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0) |
| return 0; |
| |
| /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the |
| target PC is in $31 ($ra). */ |
| if (strcmp (name, "__mips16_ret_sf") == 0 |
| || strcmp (name, "__mips16_ret_df") == 0) |
| return read_signed_register (RA_REGNUM); |
| |
| if (strncmp (name, "__mips16_call_stub_", 19) == 0) |
| { |
| /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub |
| and the target PC is in $2. */ |
| if (name[19] >= '0' && name[19] <= '9') |
| return read_signed_register (2); |
| |
| /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e. |
| before the jal instruction, this is effectively a call stub |
| and the the target PC is in $2. Otherwise this is effectively |
| a return stub and the target PC is in $18. */ |
| else if (name[19] == 's' || name[19] == 'd') |
| { |
| if (pc == start_addr) |
| { |
| /* Check if the target of the stub is a compiler-generated |
| stub. Such a stub for a function bar might have a name |
| like __fn_stub_bar, and might look like this: |
| mfc1 $4,$f13 |
| mfc1 $5,$f12 |
| mfc1 $6,$f15 |
| mfc1 $7,$f14 |
| la $1,bar (becomes a lui/addiu pair) |
| jr $1 |
| So scan down to the lui/addi and extract the target |
| address from those two instructions. */ |
| |
| CORE_ADDR target_pc = read_signed_register (2); |
| t_inst inst; |
| int i; |
| |
| /* See if the name of the target function is __fn_stub_*. */ |
| if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0) |
| return target_pc; |
| if (strncmp (name, "__fn_stub_", 10) != 0 |
| && strcmp (name, "etext") != 0 |
| && strcmp (name, "_etext") != 0) |
| return target_pc; |
| |
| /* Scan through this _fn_stub_ code for the lui/addiu pair. |
| The limit on the search is arbitrarily set to 20 |
| instructions. FIXME. */ |
| for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN) |
| { |
| inst = mips_fetch_instruction (target_pc); |
| if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */ |
| pc = (inst << 16) & 0xffff0000; /* high word */ |
| else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */ |
| return pc | (inst & 0xffff); /* low word */ |
| } |
| |
| /* Couldn't find the lui/addui pair, so return stub address. */ |
| return target_pc; |
| } |
| else |
| /* This is the 'return' part of a call stub. The return |
| address is in $r18. */ |
| return read_signed_register (18); |
| } |
| } |
| return 0; /* not a stub */ |
| } |
| |
| |
| /* Return non-zero if the PC is inside a call thunk (aka stub or trampoline). |
| This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */ |
| |
| static int |
| mips_in_call_stub (CORE_ADDR pc, char *name) |
| { |
| CORE_ADDR start_addr; |
| |
| /* Find the starting address of the function containing the PC. If the |
| caller didn't give us a name, look it up at the same time. */ |
| if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0) |
| return 0; |
| |
| if (strncmp (name, "__mips16_call_stub_", 19) == 0) |
| { |
| /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */ |
| if (name[19] >= '0' && name[19] <= '9') |
| return 1; |
| /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e. |
| before the jal instruction, this is effectively a call stub. */ |
| else if (name[19] == 's' || name[19] == 'd') |
| return pc == start_addr; |
| } |
| |
| return 0; /* not a stub */ |
| } |
| |
| |
| /* Return non-zero if the PC is inside a return thunk (aka stub or trampoline). |
| This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */ |
| |
| static int |
| mips_in_return_stub (CORE_ADDR pc, char *name) |
| { |
| CORE_ADDR start_addr; |
| |
| /* Find the starting address of the function containing the PC. */ |
| if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0) |
| return 0; |
| |
| /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */ |
| if (strcmp (name, "__mips16_ret_sf") == 0 |
| || strcmp (name, "__mips16_ret_df") == 0) |
| return 1; |
| |
| /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start, |
| i.e. after the jal instruction, this is effectively a return stub. */ |
| if (strncmp (name, "__mips16_call_stub_", 19) == 0 |
| && (name[19] == 's' || name[19] == 'd') |
| && pc != start_addr) |
| return 1; |
| |
| return 0; /* not a stub */ |
| } |
| |
| |
| /* Return non-zero if the PC is in a library helper function that should |
| be ignored. This implements the IGNORE_HELPER_CALL macro. */ |
| |
| int |
| mips_ignore_helper (CORE_ADDR pc) |
| { |
| char *name; |
| |
| /* Find the starting address and name of the function containing the PC. */ |
| if (find_pc_partial_function (pc, &name, NULL, NULL) == 0) |
| return 0; |
| |
| /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function |
| that we want to ignore. */ |
| return (strcmp (name, "__mips16_ret_sf") == 0 |
| || strcmp (name, "__mips16_ret_df") == 0); |
| } |
| |
| |
| /* Return a location where we can set a breakpoint that will be hit |
| when an inferior function call returns. This is normally the |
| program's entry point. Executables that don't have an entry |
| point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS |
| whose address is the location where the breakpoint should be placed. */ |
| |
| static CORE_ADDR |
| mips_call_dummy_address (void) |
| { |
| struct minimal_symbol *sym; |
| |
| sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL); |
| if (sym) |
| return SYMBOL_VALUE_ADDRESS (sym); |
| else |
| return entry_point_address (); |
| } |
| |
| |
| /* When debugging a 64 MIPS target running a 32 bit ABI, the size of |
| the register stored on the stack (32) is different to its real raw |
| size (64). The below ensures that registers are fetched from the |
| stack using their ABI size and then stored into the RAW_BUFFER |
| using their raw size. |
| |
| The alternative to adding this function would be to add an ABI |
| macro - REGISTER_STACK_SIZE(). */ |
| |
| static void |
| mips_get_saved_register (char *raw_buffer, |
| int *optimizedp, |
| CORE_ADDR *addrp, |
| struct frame_info *frame, |
| int regnum, |
| enum lval_type *lvalp) |
| { |
| CORE_ADDR addrx; |
| enum lval_type lvalx; |
| int optimizedx; |
| |
| if (!target_has_registers) |
| error ("No registers."); |
| |
| /* Make certain that all needed parameters are present. */ |
| if (addrp == NULL) |
| addrp = &addrx; |
| if (lvalp == NULL) |
| lvalp = &lvalx; |
| if (optimizedp == NULL) |
| optimizedp = &optimizedx; |
| generic_unwind_get_saved_register (raw_buffer, optimizedp, addrp, frame, |
| regnum, lvalp); |
| /* FIXME: cagney/2002-09-13: This is just so bad. The MIPS should |
| have a pseudo register range that correspons to the ABI's, rather |
| than the ISA's, view of registers. These registers would then |
| implicitly describe their size and hence could be used without |
| the below munging. */ |
| if ((*lvalp) == lval_memory) |
| { |
| if (raw_buffer != NULL) |
| { |
| if (regnum < 32) |
| { |
| /* Only MIPS_SAVED_REGSIZE bytes of GP registers are |
| saved. */ |
| LONGEST val = read_memory_integer ((*addrp), MIPS_SAVED_REGSIZE); |
| store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), val); |
| } |
| } |
| } |
| } |
| |
| /* Immediately after a function call, return the saved pc. |
| Can't always go through the frames for this because on some machines |
| the new frame is not set up until the new function executes |
| some instructions. */ |
| |
| static CORE_ADDR |
| mips_saved_pc_after_call (struct frame_info *frame) |
| { |
| return read_signed_register (RA_REGNUM); |
| } |
| |
| |
| /* Convert a dbx stab register number (from `r' declaration) to a gdb |
| REGNUM */ |
| |
| static int |
| mips_stab_reg_to_regnum (int num) |
| { |
| if (num >= 0 && num < 32) |
| return num; |
| else if (num >= 38 && num < 70) |
| return num + FP0_REGNUM - 38; |
| else |
| { |
| /* This will hopefully (eventually) provoke a warning. Should |
| we be calling complaint() here? */ |
| return NUM_REGS + NUM_PSEUDO_REGS; |
| } |
| } |
| |
| |
| /* Convert a dwarf, dwarf2, or ecoff register number to a gdb REGNUM */ |
| |
| static int |
| mips_dwarf_dwarf2_ecoff_reg_to_regnum (int num) |
| { |
| if (num >= 0 && num < 32) |
| return num; |
| else if (num >= 32 && num < 64) |
| return num + FP0_REGNUM - 32; |
| else |
| { |
| /* This will hopefully (eventually) provoke a warning. Should |
| we be calling complaint() here? */ |
| return NUM_REGS + NUM_PSEUDO_REGS; |
| } |
| } |
| |
| |
| /* Convert an integer into an address. By first converting the value |
| into a pointer and then extracting it signed, the address is |
| guarenteed to be correctly sign extended. */ |
| |
| static CORE_ADDR |
| mips_integer_to_address (struct type *type, void *buf) |
| { |
| char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr)); |
| LONGEST val = unpack_long (type, buf); |
| store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val); |
| return extract_signed_integer (tmp, |
| TYPE_LENGTH (builtin_type_void_data_ptr)); |
| } |
| |
| static void |
| mips_find_abi_section (bfd *abfd, asection *sect, void *obj) |
| { |
| enum mips_abi *abip = (enum mips_abi *) obj; |
| const char *name = bfd_get_section_name (abfd, sect); |
| |
| if (*abip != MIPS_ABI_UNKNOWN) |
| return; |
| |
| if (strncmp (name, ".mdebug.", 8) != 0) |
| return; |
| |
| if (strcmp (name, ".mdebug.abi32") == 0) |
| *abip = MIPS_ABI_O32; |
| else if (strcmp (name, ".mdebug.abiN32") == 0) |
| *abip = MIPS_ABI_N32; |
| else if (strcmp (name, ".mdebug.abi64") == 0) |
| *abip = MIPS_ABI_N64; |
| else if (strcmp (name, ".mdebug.abiO64") == 0) |
| *abip = MIPS_ABI_O64; |
| else if (strcmp (name, ".mdebug.eabi32") == 0) |
| *abip = MIPS_ABI_EABI32; |
| else if (strcmp (name, ".mdebug.eabi64") == 0) |
| *abip = MIPS_ABI_EABI64; |
| else |
| warning ("unsupported ABI %s.", name + 8); |
| } |
| |
| static enum mips_abi |
| global_mips_abi (void) |
| { |
| int i; |
| |
| for (i = 0; mips_abi_strings[i] != NULL; i++) |
| if (mips_abi_strings[i] == mips_abi_string) |
| return (enum mips_abi) i; |
| |
| internal_error (__FILE__, __LINE__, |
| "unknown ABI string"); |
| } |
| |
| static struct gdbarch * |
| mips_gdbarch_init (struct gdbarch_info info, |
| struct gdbarch_list *arches) |
| { |
| static LONGEST mips_call_dummy_words[] = |
| {0}; |
| struct gdbarch *gdbarch; |
| struct gdbarch_tdep *tdep; |
| int elf_flags; |
| enum mips_abi mips_abi, found_abi, wanted_abi; |
| |
| /* Reset the disassembly info, in case it was set to something |
| non-default. */ |
| tm_print_insn_info.flavour = bfd_target_unknown_flavour; |
| tm_print_insn_info.arch = bfd_arch_unknown; |
| tm_print_insn_info.mach = 0; |
| |
| elf_flags = 0; |
| |
| if (info.abfd) |
| { |
| /* First of all, extract the elf_flags, if available. */ |
| if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour) |
| elf_flags = elf_elfheader (info.abfd)->e_flags; |
| } |
| |
| /* Check ELF_FLAGS to see if it specifies the ABI being used. */ |
| switch ((elf_flags & EF_MIPS_ABI)) |
| { |
| case E_MIPS_ABI_O32: |
| mips_abi = MIPS_ABI_O32; |
| break; |
| case E_MIPS_ABI_O64: |
| mips_abi = MIPS_ABI_O64; |
| break; |
| case E_MIPS_ABI_EABI32: |
| mips_abi = MIPS_ABI_EABI32; |
| break; |
| case E_MIPS_ABI_EABI64: |
| mips_abi = MIPS_ABI_EABI64; |
| break; |
| default: |
| if ((elf_flags & EF_MIPS_ABI2)) |
| mips_abi = MIPS_ABI_N32; |
| else |
| mips_abi = MIPS_ABI_UNKNOWN; |
| break; |
| } |
| |
| /* GCC creates a pseudo-section whose name describes the ABI. */ |
| if (mips_abi == MIPS_ABI_UNKNOWN && info.abfd != NULL) |
| bfd_map_over_sections (info.abfd, mips_find_abi_section, &mips_abi); |
| |
| /* If we have no bfd, then mips_abi will still be MIPS_ABI_UNKNOWN. |
| Use the ABI from the last architecture if there is one. */ |
| if (info.abfd == NULL && arches != NULL) |
| mips_abi = gdbarch_tdep (arches->gdbarch)->found_abi; |
| |
| /* Try the architecture for any hint of the correct ABI. */ |
| if (mips_abi == MIPS_ABI_UNKNOWN |
| && info.bfd_arch_info != NULL |
| && info.bfd_arch_info->arch == bfd_arch_mips) |
| { |
| switch (info.bfd_arch_info->mach) |
| { |
| case bfd_mach_mips3900: |
| mips_abi = MIPS_ABI_EABI32; |
| break; |
| case bfd_mach_mips4100: |
| case bfd_mach_mips5000: |
| mips_abi = MIPS_ABI_EABI64; |
| break; |
| case bfd_mach_mips8000: |
| case bfd_mach_mips10000: |
| /* On Irix, ELF64 executables use the N64 ABI. The |
| pseudo-sections which describe the ABI aren't present |
| on IRIX. (Even for executables created by gcc.) */ |
| if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour |
| && elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64) |
| mips_abi = MIPS_ABI_N64; |
| else |
| mips_abi = MIPS_ABI_N32; |
| break; |
| } |
| } |
| |
| if (mips_abi == MIPS_ABI_UNKNOWN) |
| mips_abi = MIPS_ABI_O32; |
| |
| /* Now that we have found what the ABI for this binary would be, |
| check whether the user is overriding it. */ |
| found_abi = mips_abi; |
| wanted_abi = global_mips_abi (); |
| if (wanted_abi != MIPS_ABI_UNKNOWN) |
| mips_abi = wanted_abi; |
| |
| if (gdbarch_debug) |
| { |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_gdbarch_init: elf_flags = 0x%08x\n", |
| elf_flags); |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_gdbarch_init: mips_abi = %d\n", |
| mips_abi); |
| fprintf_unfiltered (gdb_stdlog, |
| "mips_gdbarch_init: found_mips_abi = %d\n", |
| found_abi); |
| } |
| |
| /* try to find a pre-existing architecture */ |
| for (arches = gdbarch_list_lookup_by_info (arches, &info); |
| arches != NULL; |
| arches = gdbarch_list_lookup_by_info (arches->next, &info)) |
| { |
| /* MIPS needs to be pedantic about which ABI the object is |
| using. */ |
| if (gdbarch_tdep (arches->gdbarch)->elf_flags != elf_flags) |
| continue; |
| if (gdbarch_tdep (arches->gdbarch)->mips_abi != mips_abi) |
| continue; |
| return arches->gdbarch; |
| } |
| |
| /* Need a new architecture. Fill in a target specific vector. */ |
| tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep)); |
| gdbarch = gdbarch_alloc (&info, tdep); |
| tdep->elf_flags = elf_flags; |
| |
| /* Initially set everything according to the default ABI/ISA. */ |
| set_gdbarch_short_bit (gdbarch, 16); |
| set_gdbarch_int_bit (gdbarch, 32); |
| set_gdbarch_float_bit (gdbarch, 32); |
| set_gdbarch_double_bit (gdbarch, 64); |
| set_gdbarch_long_double_bit (gdbarch, 64); |
| set_gdbarch_register_raw_size (gdbarch, mips_register_raw_size); |
| set_gdbarch_deprecated_max_register_raw_size (gdbarch, 8); |
| set_gdbarch_deprecated_max_register_virtual_size (gdbarch, 8); |
| tdep->found_abi = found_abi; |
| tdep->mips_abi = mips_abi; |
| |
| set_gdbarch_elf_make_msymbol_special (gdbarch, |
| mips_elf_make_msymbol_special); |
| |
| if (info.osabi == GDB_OSABI_IRIX) |
| set_gdbarch_num_regs (gdbarch, 71); |
| else |
| set_gdbarch_num_regs (gdbarch, 90); |
| |
| switch (mips_abi) |
| { |
| case MIPS_ABI_O32: |
| set_gdbarch_push_arguments (gdbarch, mips_o32_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_o32_store_return_value); |
| set_gdbarch_extract_return_value (gdbarch, mips_o32_extract_return_value); |
| tdep->mips_default_saved_regsize = 4; |
| tdep->mips_default_stack_argsize = 4; |
| tdep->mips_fp_register_double = 0; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1; |
| tdep->gdb_target_is_mips64 = 0; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 32); |
| set_gdbarch_ptr_bit (gdbarch, 32); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_o32_reg_struct_has_addr); |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_o32_use_struct_convention); |
| break; |
| case MIPS_ABI_O64: |
| set_gdbarch_push_arguments (gdbarch, mips_o64_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_o64_store_return_value); |
| set_gdbarch_deprecated_extract_return_value (gdbarch, mips_o64_extract_return_value); |
| tdep->mips_default_saved_regsize = 8; |
| tdep->mips_default_stack_argsize = 8; |
| tdep->mips_fp_register_double = 1; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 4 - 1; |
| tdep->gdb_target_is_mips64 = 1; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 32); |
| set_gdbarch_ptr_bit (gdbarch, 32); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_o32_reg_struct_has_addr); |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_o32_use_struct_convention); |
| break; |
| case MIPS_ABI_EABI32: |
| set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value); |
| set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value); |
| tdep->mips_default_saved_regsize = 4; |
| tdep->mips_default_stack_argsize = 4; |
| tdep->mips_fp_register_double = 0; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1; |
| tdep->gdb_target_is_mips64 = 0; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 32); |
| set_gdbarch_ptr_bit (gdbarch, 32); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_eabi_reg_struct_has_addr); |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_eabi_use_struct_convention); |
| break; |
| case MIPS_ABI_EABI64: |
| set_gdbarch_push_arguments (gdbarch, mips_eabi_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_eabi_store_return_value); |
| set_gdbarch_deprecated_extract_return_value (gdbarch, mips_eabi_extract_return_value); |
| tdep->mips_default_saved_regsize = 8; |
| tdep->mips_default_stack_argsize = 8; |
| tdep->mips_fp_register_double = 1; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1; |
| tdep->gdb_target_is_mips64 = 1; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 64); |
| set_gdbarch_ptr_bit (gdbarch, 64); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_eabi_reg_struct_has_addr); |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_eabi_use_struct_convention); |
| break; |
| case MIPS_ABI_N32: |
| set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value); |
| set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value); |
| tdep->mips_default_saved_regsize = 8; |
| tdep->mips_default_stack_argsize = 8; |
| tdep->mips_fp_register_double = 1; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1; |
| tdep->gdb_target_is_mips64 = 1; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 32); |
| set_gdbarch_ptr_bit (gdbarch, 32); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| |
| /* Set up the disassembler info, so that we get the right |
| register names from libopcodes. */ |
| tm_print_insn_info.flavour = bfd_target_elf_flavour; |
| tm_print_insn_info.arch = bfd_arch_mips; |
| if (info.bfd_arch_info != NULL |
| && info.bfd_arch_info->arch == bfd_arch_mips |
| && info.bfd_arch_info->mach) |
| tm_print_insn_info.mach = info.bfd_arch_info->mach; |
| else |
| tm_print_insn_info.mach = bfd_mach_mips8000; |
| |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_n32n64_use_struct_convention); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_n32n64_reg_struct_has_addr); |
| break; |
| case MIPS_ABI_N64: |
| set_gdbarch_push_arguments (gdbarch, mips_n32n64_push_arguments); |
| set_gdbarch_deprecated_store_return_value (gdbarch, mips_n32n64_store_return_value); |
| set_gdbarch_extract_return_value (gdbarch, mips_n32n64_extract_return_value); |
| tdep->mips_default_saved_regsize = 8; |
| tdep->mips_default_stack_argsize = 8; |
| tdep->mips_fp_register_double = 1; |
| tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; |
| tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1; |
| tdep->gdb_target_is_mips64 = 1; |
| tdep->default_mask_address_p = 0; |
| set_gdbarch_long_bit (gdbarch, 64); |
| set_gdbarch_ptr_bit (gdbarch, 64); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| |
| /* Set up the disassembler info, so that we get the right |
| register names from libopcodes. */ |
| tm_print_insn_info.flavour = bfd_target_elf_flavour; |
| tm_print_insn_info.arch = bfd_arch_mips; |
| if (info.bfd_arch_info != NULL |
| && info.bfd_arch_info->arch == bfd_arch_mips |
| && info.bfd_arch_info->mach) |
| tm_print_insn_info.mach = info.bfd_arch_info->mach; |
| else |
| tm_print_insn_info.mach = bfd_mach_mips8000; |
| |
| set_gdbarch_use_struct_convention (gdbarch, |
| mips_n32n64_use_struct_convention); |
| set_gdbarch_reg_struct_has_addr (gdbarch, |
| mips_n32n64_reg_struct_has_addr); |
| break; |
| default: |
| internal_error (__FILE__, __LINE__, |
| "unknown ABI in switch"); |
| } |
| |
| /* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE |
| that could indicate -gp32 BUT gas/config/tc-mips.c contains the |
| comment: |
| |
| ``We deliberately don't allow "-gp32" to set the MIPS_32BITMODE |
| flag in object files because to do so would make it impossible to |
| link with libraries compiled without "-gp32". This is |
| unnecessarily restrictive. |
| |
| We could solve this problem by adding "-gp32" multilibs to gcc, |
| but to set this flag before gcc is built with such multilibs will |
| break too many systems.'' |
| |
| But even more unhelpfully, the default linker output target for |
| mips64-elf is elf32-bigmips, and has EF_MIPS_32BIT_MODE set, even |
| for 64-bit programs - you need to change the ABI to change this, |
| and not all gcc targets support that currently. Therefore using |
| this flag to detect 32-bit mode would do the wrong thing given |
| the current gcc - it would make GDB treat these 64-bit programs |
| as 32-bit programs by default. */ |
| |
| /* enable/disable the MIPS FPU */ |
| if (!mips_fpu_type_auto) |
| tdep->mips_fpu_type = mips_fpu_type; |
| else if (info.bfd_arch_info != NULL |
| && info.bfd_arch_info->arch == bfd_arch_mips) |
| switch (info.bfd_arch_info->mach) |
| { |
| case bfd_mach_mips3900: |
| case bfd_mach_mips4100: |
| case bfd_mach_mips4111: |
| tdep->mips_fpu_type = MIPS_FPU_NONE; |
| break; |
| case bfd_mach_mips4650: |
| tdep->mips_fpu_type = MIPS_FPU_SINGLE; |
| break; |
| default: |
| tdep->mips_fpu_type = MIPS_FPU_DOUBLE; |
| break; |
| } |
| else |
| tdep->mips_fpu_type = MIPS_FPU_DOUBLE; |
| |
| /* MIPS version of register names. NOTE: At present the MIPS |
| register name management is part way between the old - |
| #undef/#define REGISTER_NAMES and the new REGISTER_NAME(nr). |
| Further work on it is required. */ |
| /* NOTE: many targets (esp. embedded) do not go thru the |
| gdbarch_register_name vector at all, instead bypassing it |
| by defining REGISTER_NAMES. */ |
| set_gdbarch_register_name (gdbarch, mips_register_name); |
| set_gdbarch_read_pc (gdbarch, mips_read_pc); |
| set_gdbarch_write_pc (gdbarch, generic_target_write_pc); |
| set_gdbarch_read_fp (gdbarch, mips_read_sp); /* Draft FRAME base. */ |
| set_gdbarch_read_sp (gdbarch, mips_read_sp); |
| set_gdbarch_write_sp (gdbarch, generic_target_write_sp); |
| |
| /* Add/remove bits from an address. The MIPS needs be careful to |
| ensure that all 32 bit addresses are sign extended to 64 bits. */ |
| set_gdbarch_addr_bits_remove (gdbarch, mips_addr_bits_remove); |
| |
| /* There's a mess in stack frame creation. See comments in |
| blockframe.c near reference to DEPRECATED_INIT_FRAME_PC_FIRST. */ |
| set_gdbarch_deprecated_init_frame_pc_first (gdbarch, mips_init_frame_pc_first); |
| set_gdbarch_deprecated_init_frame_pc (gdbarch, init_frame_pc_noop); |
| |
| /* Map debug register numbers onto internal register numbers. */ |
| set_gdbarch_stab_reg_to_regnum (gdbarch, mips_stab_reg_to_regnum); |
| set_gdbarch_ecoff_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum); |
| set_gdbarch_dwarf_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum); |
| set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mips_dwarf_dwarf2_ecoff_reg_to_regnum); |
| |
| /* Initialize a frame */ |
| set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, mips_frame_init_saved_regs); |
| set_gdbarch_deprecated_init_extra_frame_info (gdbarch, mips_init_extra_frame_info); |
| |
| /* MIPS version of CALL_DUMMY */ |
| |
| set_gdbarch_call_dummy_p (gdbarch, 1); |
| set_gdbarch_call_dummy_address (gdbarch, mips_call_dummy_address); |
| set_gdbarch_push_return_address (gdbarch, mips_push_return_address); |
| set_gdbarch_deprecated_pop_frame (gdbarch, mips_pop_frame); |
| set_gdbarch_call_dummy_start_offset (gdbarch, 0); |
| set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); |
| set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0); |
| set_gdbarch_call_dummy_length (gdbarch, 0); |
| set_gdbarch_fix_call_dummy (gdbarch, mips_fix_call_dummy); |
| set_gdbarch_call_dummy_words (gdbarch, mips_call_dummy_words); |
| set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (mips_call_dummy_words)); |
| set_gdbarch_push_return_address (gdbarch, mips_push_return_address); |
| set_gdbarch_frame_align (gdbarch, mips_frame_align); |
| set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos); |
| set_gdbarch_register_convertible (gdbarch, mips_register_convertible); |
| set_gdbarch_register_convert_to_virtual (gdbarch, |
| mips_register_convert_to_virtual); |
| set_gdbarch_register_convert_to_raw (gdbarch, |
| mips_register_convert_to_raw); |
| |
| set_gdbarch_deprecated_frame_chain (gdbarch, mips_frame_chain); |
| set_gdbarch_frameless_function_invocation (gdbarch, |
| generic_frameless_function_invocation_not); |
| set_gdbarch_deprecated_frame_saved_pc (gdbarch, mips_frame_saved_pc); |
| set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown); |
| set_gdbarch_frame_args_skip (gdbarch, 0); |
| |
| set_gdbarch_deprecated_get_saved_register (gdbarch, mips_get_saved_register); |
| |
| set_gdbarch_inner_than (gdbarch, core_addr_lessthan); |
| set_gdbarch_breakpoint_from_pc (gdbarch, mips_breakpoint_from_pc); |
| set_gdbarch_decr_pc_after_break (gdbarch, 0); |
| |
| set_gdbarch_skip_prologue (gdbarch, mips_skip_prologue); |
| set_gdbarch_saved_pc_after_call (gdbarch, mips_saved_pc_after_call); |
| |
| set_gdbarch_pointer_to_address (gdbarch, signed_pointer_to_address); |
| set_gdbarch_address_to_pointer (gdbarch, address_to_signed_pointer); |
| set_gdbarch_integer_to_address (gdbarch, mips_integer_to_address); |
| |
| set_gdbarch_function_start_offset (gdbarch, 0); |
| |
| /* There are MIPS targets which do not yet use this since they still |
| define REGISTER_VIRTUAL_TYPE. */ |
| set_gdbarch_register_virtual_type (gdbarch, mips_register_virtual_type); |
| set_gdbarch_register_virtual_size (gdbarch, generic_register_size); |
| |
| set_gdbarch_deprecated_do_registers_info (gdbarch, mips_do_registers_info); |
| set_gdbarch_pc_in_sigtramp (gdbarch, mips_pc_in_sigtramp); |
| |
| /* Hook in OS ABI-specific overrides, if they have been registered. */ |
| gdbarch_init_osabi (info, gdbarch); |
| |
| set_gdbarch_deprecated_store_struct_return (gdbarch, mips_store_struct_return); |
| set_gdbarch_extract_struct_value_address (gdbarch, |
| mips_extract_struct_value_address); |
| |
| set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub); |
| |
| set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub); |
| set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub); |
| |
| return gdbarch; |
| } |
| |
| static void |
| mips_abi_update (char *ignore_args, int from_tty, |
| struct cmd_list_element *c) |
| { |
| struct gdbarch_info info; |
| |
| /* Force the architecture to update, and (if it's a MIPS architecture) |
| mips_gdbarch_init will take care of the rest. */ |
| gdbarch_info_init (&info); |
| gdbarch_update_p (info); |
| } |
| |
| /* Print out which MIPS ABI is in use. */ |
| |
| static void |
| show_mips_abi (char *ignore_args, int from_tty) |
| { |
| if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips) |
| printf_filtered ( |
| "The MIPS ABI is unknown because the current architecture is not MIPS.\n"); |
| else |
| { |
| enum mips_abi global_abi = global_mips_abi (); |
| enum mips_abi actual_abi = mips_abi (current_gdbarch); |
| const char *actual_abi_str = mips_abi_strings[actual_abi]; |
| |
| if (global_abi == MIPS_ABI_UNKNOWN) |
| printf_filtered ("The MIPS ABI is set automatically (currently \"%s\").\n", |
| actual_abi_str); |
| else if (global_abi == actual_abi) |
| printf_filtered ( |
| "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n", |
| actual_abi_str); |
| else |
| { |
| /* Probably shouldn't happen... */ |
| printf_filtered ( |
| "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n", |
| actual_abi_str, |
| mips_abi_strings[global_abi]); |
| } |
| } |
| } |
| |
| static void |
| mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file) |
| { |
| struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| if (tdep != NULL) |
| { |
| int ef_mips_arch; |
| int ef_mips_32bitmode; |
| /* determine the ISA */ |
| switch (tdep->elf_flags & EF_MIPS_ARCH) |
| { |
| case E_MIPS_ARCH_1: |
| ef_mips_arch = 1; |
| break; |
| case E_MIPS_ARCH_2: |
| ef_mips_arch = 2; |
| break; |
| case E_MIPS_ARCH_3: |
| ef_mips_arch = 3; |
| break; |
| case E_MIPS_ARCH_4: |
| ef_mips_arch = 4; |
| break; |
| default: |
| ef_mips_arch = 0; |
| break; |
| } |
| /* determine the size of a pointer */ |
| ef_mips_32bitmode = (tdep->elf_flags & EF_MIPS_32BITMODE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: tdep->elf_flags = 0x%x\n", |
| tdep->elf_flags); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ef_mips_32bitmode = %d\n", |
| ef_mips_32bitmode); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ef_mips_arch = %d\n", |
| ef_mips_arch); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: tdep->mips_abi = %d (%s)\n", |
| tdep->mips_abi, |
| mips_abi_strings[tdep->mips_abi]); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: mips_mask_address_p() %d (default %d)\n", |
| mips_mask_address_p (), |
| tdep->default_mask_address_p); |
| } |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n", |
| FP_REGISTER_DOUBLE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_DEFAULT_FPU_TYPE = %d (%s)\n", |
| MIPS_DEFAULT_FPU_TYPE, |
| (MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_NONE ? "none" |
| : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_SINGLE ? "single" |
| : MIPS_DEFAULT_FPU_TYPE == MIPS_FPU_DOUBLE ? "double" |
| : "???")); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_EABI = %d\n", |
| MIPS_EABI); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_LAST_FP_ARG_REGNUM = %d (%d regs)\n", |
| MIPS_LAST_FP_ARG_REGNUM, |
| MIPS_LAST_FP_ARG_REGNUM - FPA0_REGNUM + 1); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_FPU_TYPE = %d (%s)\n", |
| MIPS_FPU_TYPE, |
| (MIPS_FPU_TYPE == MIPS_FPU_NONE ? "none" |
| : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? "single" |
| : MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? "double" |
| : "???")); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_DEFAULT_SAVED_REGSIZE = %d\n", |
| MIPS_DEFAULT_SAVED_REGSIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FP_REGISTER_DOUBLE = %d\n", |
| FP_REGISTER_DOUBLE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_DEFAULT_STACK_ARGSIZE = %d\n", |
| MIPS_DEFAULT_STACK_ARGSIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_STACK_ARGSIZE = %d\n", |
| MIPS_STACK_ARGSIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_REGSIZE = %d\n", |
| MIPS_REGSIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: A0_REGNUM = %d\n", |
| A0_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n", |
| XSTRING (ADDR_BITS_REMOVE(ADDR))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ATTACH_DETACH # %s\n", |
| XSTRING (ATTACH_DETACH)); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: BADVADDR_REGNUM = %d\n", |
| BADVADDR_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: BIG_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: CAUSE_REGNUM = %d\n", |
| CAUSE_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n", |
| XSTRING (DWARF_REG_TO_REGNUM (REGNUM))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n", |
| XSTRING (ECOFF_REG_TO_REGNUM (REGNUM))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FCRCS_REGNUM = %d\n", |
| FCRCS_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FCRIR_REGNUM = %d\n", |
| FCRIR_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n", |
| FIRST_EMBED_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: FPA0_REGNUM = %d\n", |
| FPA0_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: GDB_TARGET_IS_MIPS64 = %d\n", |
| GDB_TARGET_IS_MIPS64); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: GEN_REG_SAVE_MASK = %d\n", |
| GEN_REG_SAVE_MASK); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: HAVE_NONSTEPPABLE_WATCHPOINT # %s\n", |
| XSTRING (HAVE_NONSTEPPABLE_WATCHPOINT)); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: HI_REGNUM = %d\n", |
| HI_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IDT_BIG_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IDT_LITTLE_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n", |
| XSTRING (IGNORE_HELPER_CALL (PC))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n", |
| XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n", |
| XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: IS_MIPS16_ADDR = FIXME!\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n", |
| LAST_EMBED_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: LITTLE_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: LO_REGNUM = %d\n", |
| LO_REGNUM); |
| #ifdef MACHINE_CPROC_FP_OFFSET |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n", |
| MACHINE_CPROC_FP_OFFSET); |
| #endif |
| #ifdef MACHINE_CPROC_PC_OFFSET |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n", |
| MACHINE_CPROC_PC_OFFSET); |
| #endif |
| #ifdef MACHINE_CPROC_SP_OFFSET |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n", |
| MACHINE_CPROC_SP_OFFSET); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MAKE_MIPS16_ADDR = FIXME!\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS16_BIG_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS16_INSTLEN = %d\n", |
| MIPS16_INSTLEN); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS16_LITTLE_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_INSTLEN = %d\n", |
| MIPS_INSTLEN); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n", |
| MIPS_LAST_ARG_REGNUM, |
| MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_NUMREGS = %d\n", |
| MIPS_NUMREGS); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_REGISTER_NAMES = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: MIPS_SAVED_REGSIZE = %d\n", |
| MIPS_SAVED_REGSIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: OP_LDFPR = used?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: OP_LDGPR = used?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PMON_BIG_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PMON_LITTLE_BREAKPOINT = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PRID_REGNUM = %d\n", |
| PRID_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PRINT_EXTRA_FRAME_INFO # %s\n", |
| XSTRING (PRINT_EXTRA_FRAME_INFO (FRAME))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_FRAME_REG = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_FREG_MASK = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_FREG_OFFSET = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_HIGH_ADDR = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_LOW_ADDR = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_PC_REG = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_REG_MASK = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_REG_OFFSET = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PROC_SYMBOL = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PS_REGNUM = %d\n", |
| PS_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: PUSH_FP_REGNUM = %d\n", |
| PUSH_FP_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: RA_REGNUM = %d\n", |
| RA_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: REGISTER_CONVERT_FROM_TYPE # %s\n", |
| XSTRING (REGISTER_CONVERT_FROM_TYPE (REGNUM, VALTYPE, RAW_BUFFER))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: REGISTER_CONVERT_TO_TYPE # %s\n", |
| XSTRING (REGISTER_CONVERT_TO_TYPE (REGNUM, VALTYPE, RAW_BUFFER))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: REGISTER_NAMES = delete?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ROUND_DOWN = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ROUND_UP = function?\n"); |
| #ifdef SAVED_BYTES |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SAVED_BYTES = %d\n", |
| SAVED_BYTES); |
| #endif |
| #ifdef SAVED_FP |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SAVED_FP = %d\n", |
| SAVED_FP); |
| #endif |
| #ifdef SAVED_PC |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SAVED_PC = %d\n", |
| SAVED_PC); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n", |
| XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SIGFRAME_BASE = %d\n", |
| SIGFRAME_BASE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SIGFRAME_FPREGSAVE_OFF = %d\n", |
| SIGFRAME_FPREGSAVE_OFF); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SIGFRAME_PC_OFF = %d\n", |
| SIGFRAME_PC_OFF); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SIGFRAME_REGSAVE_OFF = %d\n", |
| SIGFRAME_REGSAVE_OFF); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SIGFRAME_REG_SIZE = %d\n", |
| SIGFRAME_REG_SIZE); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n", |
| XSTRING (SKIP_TRAMPOLINE_CODE (PC))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n", |
| XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n", |
| SOFTWARE_SINGLE_STEP_P ()); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n", |
| XSTRING (STAB_REG_TO_REGNUM (REGNUM))); |
| #ifdef STACK_END_ADDR |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: STACK_END_ADDR = %d\n", |
| STACK_END_ADDR); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n", |
| XSTRING (STEP_SKIPS_DELAY (PC))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n", |
| STEP_SKIPS_DELAY_P); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n", |
| XSTRING (STOPPED_BY_WATCHPOINT (WS))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: T9_REGNUM = %d\n", |
| T9_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n", |
| XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE,CNT,OTHERTYPE))); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n", |
| XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS)); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TARGET_MIPS = used?\n"); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TM_PRINT_INSN_MACH # %s\n", |
| XSTRING (TM_PRINT_INSN_MACH)); |
| #ifdef TRACE_CLEAR |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TRACE_CLEAR # %s\n", |
| XSTRING (TRACE_CLEAR (THREAD, STATE))); |
| #endif |
| #ifdef TRACE_FLAVOR |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TRACE_FLAVOR = %d\n", |
| TRACE_FLAVOR); |
| #endif |
| #ifdef TRACE_FLAVOR_SIZE |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n", |
| TRACE_FLAVOR_SIZE); |
| #endif |
| #ifdef TRACE_SET |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: TRACE_SET # %s\n", |
| XSTRING (TRACE_SET (X,STATE))); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: UNMAKE_MIPS16_ADDR = function?\n"); |
| #ifdef UNUSED_REGNUM |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: UNUSED_REGNUM = %d\n", |
| UNUSED_REGNUM); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: V0_REGNUM = %d\n", |
| V0_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n", |
| (long) VM_MIN_ADDRESS); |
| #ifdef VX_NUM_REGS |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: VX_NUM_REGS = %d (used?)\n", |
| VX_NUM_REGS); |
| #endif |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: ZERO_REGNUM = %d\n", |
| ZERO_REGNUM); |
| fprintf_unfiltered (file, |
| "mips_dump_tdep: _PROC_MAGIC_ = %d\n", |
| _PROC_MAGIC_); |
| } |
| |
| void |
| _initialize_mips_tdep (void) |
| { |
| static struct cmd_list_element *mipsfpulist = NULL; |
| struct cmd_list_element *c; |
| |
| mips_abi_string = mips_abi_strings [MIPS_ABI_UNKNOWN]; |
| if (MIPS_ABI_LAST + 1 |
| != sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0])) |
| internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync"); |
| |
| gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep); |
| if (!tm_print_insn) /* Someone may have already set it */ |
| tm_print_insn = gdb_print_insn_mips; |
| |
| /* Add root prefix command for all "set mips"/"show mips" commands */ |
| add_prefix_cmd ("mips", no_class, set_mips_command, |
| "Various MIPS specific commands.", |
| &setmipscmdlist, "set mips ", 0, &setlist); |
| |
| add_prefix_cmd ("mips", no_class, show_mips_command, |
| "Various MIPS specific commands.", |
| &showmipscmdlist, "show mips ", 0, &showlist); |
| |
| /* Allow the user to override the saved register size. */ |
| add_show_from_set (add_set_enum_cmd ("saved-gpreg-size", |
| class_obscure, |
| size_enums, |
| &mips_saved_regsize_string, "\ |
| Set size of general purpose registers saved on the stack.\n\ |
| This option can be set to one of:\n\ |
| 32 - Force GDB to treat saved GP registers as 32-bit\n\ |
| 64 - Force GDB to treat saved GP registers as 64-bit\n\ |
| auto - Allow GDB to use the target's default setting or autodetect the\n\ |
| saved GP register size from information contained in the executable.\n\ |
| (default: auto)", |
| &setmipscmdlist), |
| &showmipscmdlist); |
| |
| /* Allow the user to override the argument stack size. */ |
| add_show_from_set (add_set_enum_cmd ("stack-arg-size", |
| class_obscure, |
| size_enums, |
| &mips_stack_argsize_string, "\ |
| Set the amount of stack space reserved for each argument.\n\ |
| This option can be set to one of:\n\ |
| 32 - Force GDB to allocate 32-bit chunks per argument\n\ |
| 64 - Force GDB to allocate 64-bit chunks per argument\n\ |
| auto - Allow GDB to determine the correct setting from the current\n\ |
| target and executable (default)", |
| &setmipscmdlist), |
| &showmipscmdlist); |
| |
| /* Allow the user to override the ABI. */ |
| c = add_set_enum_cmd |
| ("abi", class_obscure, mips_abi_strings, &mips_abi_string, |
| "Set the ABI used by this program.\n" |
| "This option can be set to one of:\n" |
| " auto - the default ABI associated with the current binary\n" |
| " o32\n" |
| " o64\n" |
| " n32\n" |
| " n64\n" |
| " eabi32\n" |
| " eabi64", |
| &setmipscmdlist); |
| set_cmd_sfunc (c, mips_abi_update); |
| add_cmd ("abi", class_obscure, show_mips_abi, |
| "Show ABI in use by MIPS target", &showmipscmdlist); |
| |
| /* Let the user turn off floating point and set the fence post for |
| heuristic_proc_start. */ |
| |
| add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command, |
| "Set use of MIPS floating-point coprocessor.", |
| &mipsfpulist, "set mipsfpu ", 0, &setlist); |
| add_cmd ("single", class_support, set_mipsfpu_single_command, |
| "Select single-precision MIPS floating-point coprocessor.", |
| &mipsfpulist); |
| add_cmd ("double", class_support, set_mipsfpu_double_command, |
| "Select double-precision MIPS floating-point coprocessor.", |
| &mipsfpulist); |
| add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist); |
| add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist); |
| add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist); |
| add_cmd ("none", class_support, set_mipsfpu_none_command, |
| "Select no MIPS floating-point coprocessor.", |
| &mipsfpulist); |
| add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist); |
| add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist); |
| add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist); |
| add_cmd ("auto", class_support, set_mipsfpu_auto_command, |
| "Select MIPS floating-point coprocessor automatically.", |
| &mipsfpulist); |
| add_cmd ("mipsfpu", class_support, show_mipsfpu_command, |
| "Show current use of MIPS floating-point coprocessor target.", |
| &showlist); |
| |
| /* We really would like to have both "0" and "unlimited" work, but |
| command.c doesn't deal with that. So make it a var_zinteger |
| because the user can always use "999999" or some such for unlimited. */ |
| c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger, |
| (char *) &heuristic_fence_post, |
| "\ |
| Set the distance searched for the start of a function.\n\ |
| If you are debugging a stripped executable, GDB needs to search through the\n\ |
| program for the start of a function. This command sets the distance of the\n\ |
| search. The only need to set it is when debugging a stripped executable.", |
| &setlist); |
| /* We need to throw away the frame cache when we set this, since it |
| might change our ability to get backtraces. */ |
| set_cmd_sfunc (c, reinit_frame_cache_sfunc); |
| add_show_from_set (c, &showlist); |
| |
| /* Allow the user to control whether the upper bits of 64-bit |
| addresses should be zeroed. */ |
| add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\ |
| Set zeroing of upper 32 bits of 64-bit addresses.\n\ |
| Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\ |
| allow GDB to determine the correct value.\n", "\ |
| Show zeroing of upper 32 bits of 64-bit addresses.", |
| NULL, show_mask_address, |
| &setmipscmdlist, &showmipscmdlist); |
| |
| /* Allow the user to control the size of 32 bit registers within the |
| raw remote packet. */ |
| add_show_from_set (add_set_cmd ("remote-mips64-transfers-32bit-regs", |
| class_obscure, |
| var_boolean, |
| (char *)&mips64_transfers_32bit_regs_p, "\ |
| Set compatibility with MIPS targets that transfers 32 and 64 bit quantities.\n\ |
| Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\ |
| that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\ |
| 64 bits for others. Use \"off\" to disable compatibility mode", |
| &setlist), |
| &showlist); |
| |
| /* Debug this files internals. */ |
| add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger, |
| &mips_debug, "Set mips debugging.\n\ |
| When non-zero, mips specific debugging is enabled.", &setdebuglist), |
| &showdebuglist); |
| } |