blob: d4627f86fbe7ad984659da7349410e00d30a8f24 [file] [log] [blame]
/* tc-sh64.c -- Assemble code for the SuperH SH SHcompact and SHmedia.
Copyright (C) 2000-2016 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
the Free Software Foundation, 51 Franklin Street - Fifth Floor,
Boston, MA 02110-1301, USA. */
/* This file defines SHmedia ISA-specific functions and includes tc-sh.c.
The SHcompact ISA is in all useful aspects the "old" sh4 as implemented
in tc-sh.c. Not making this file part of tc-sh.c makes it easier to
keep a leaner sh[1-4]-only implementation. */
#define HAVE_SH64
#include "as.h"
#include "safe-ctype.h"
#include "opcodes/sh64-opc.h"
#ifndef OBJ_ELF
#error This file assumes object output is in the ELF format
#endif
/* Suffix used when we make "datalabel" symbol copies. It must not
collide with anything that can normally appear in a symbol, "faked
symbol" or local symbol. */
#define DATALABEL_SUFFIX " DL"
/* See shmedia_md_apply_fix and shmedia_md_pcrel_from_section for usage. */
#define SHMEDIA_MD_PCREL_FROM_FIX(FIXP) \
((FIXP)->fx_size + (FIXP)->fx_where + (FIXP)->fx_frag->fr_address - 4)
/* We use this internally to see which one is PT and which is a PTA/PTB
that should be error-checked. We give it a better name here (but not
one that looks official). Adding it to reloc.c would make it look too
much of a real reloc; it is just used temporarily as a fixup-type. */
#define SHMEDIA_BFD_RELOC_PT BFD_RELOC_12_PCREL
typedef struct
{
shmedia_arg_type type;
/* These could go into a union, but that would uglify the code. */
int reg;
expressionS immediate;
/* If IMMEDIATE was a shift-expression, like "(S >> N) & 65535", where
N = 0, 16, 32, 48, used to extract a certain 16-bit-field to make up
a MOVI or SHORI relocation for a symbol, then we put the
corresponding reloc-type here and modify the "immediate" expression
to S. Otherwise, this is just BFD_RELOC_NONE. */
bfd_reloc_code_real_type reloctype;
} shmedia_operand_info;
/* Frag containing last base instruction. This is put in the TC field in
a frag, so we can emit fixups for fr_opcode without needing to make
sure that the opcode is in the same frag as any variant operand. */
fragS *sh64_last_insn_frag = NULL;
typedef struct
{
shmedia_operand_info operands[3];
unsigned long ops_val;
} shmedia_operands_info;
enum sh64_abi_values
{ sh64_abi_unspecified, sh64_abi_32, sh64_abi_64 };
/* What ISA are we assembling code for? */
enum sh64_isa_values sh64_isa_mode = sh64_isa_unspecified;
/* What ABI was specified, if any (implicitly or explicitly)? */
static enum sh64_abi_values sh64_abi = sh64_abi_unspecified;
/* A note that says if we're in a sequence of insns without label
settings, segment or ISA mode changes or emitted data. */
static bfd_boolean seen_insn = FALSE;
/* This is set to TRUE in shmedia_md_end, so that we don't emit any
.cranges entries when the assembler calls output functions while
grinding along after all input is seen. */
static bfd_boolean sh64_end_of_assembly = FALSE;
/* Controlled by the option -no-mix, this invalidates mixing SHcompact and
SHmedia code in the same section, and also invalidates mixing data and
SHmedia code in the same section. No .cranges will therefore be
emitted, unless -shcompact-const-crange is specified and there is a
constant pool in SHcompact code. */
static bfd_boolean sh64_mix = TRUE;
static bfd_boolean sh64_shcompact_const_crange = FALSE;
/* Controlled by the option -no-expand, this says whether or not we expand
MOVI and PT/PTA/PTB. When we do not expand these insns to fit an
operand, we will emit errors for operands out of range and generate the
basic instruction and reloc for an external symbol. */
static bfd_boolean sh64_expand = TRUE;
/* Controlled by the option -expand-pt32, this says whether we expand
PT/PTA/PTB of an external symbol to (only) 32 or (the full) 64 bits
when -abi=64 is in effect. */
static bfd_boolean sh64_pt32 = FALSE;
/* When emitting a .cranges descriptor, we want to avoid getting recursive
calls through emit_expr. */
static bfd_boolean emitting_crange = FALSE;
/* SHmedia mnemonics. */
static struct hash_control *shmedia_opcode_hash_control = NULL;
static const unsigned char shmedia_big_nop_pattern[4] =
{
(SHMEDIA_NOP_OPC >> 24) & 255, (SHMEDIA_NOP_OPC >> 16) & 255,
(SHMEDIA_NOP_OPC >> 8) & 255, SHMEDIA_NOP_OPC & 255
};
static const unsigned char shmedia_little_nop_pattern[4] =
{
SHMEDIA_NOP_OPC & 255, (SHMEDIA_NOP_OPC >> 8) & 255,
(SHMEDIA_NOP_OPC >> 16) & 255, (SHMEDIA_NOP_OPC >> 24) & 255
};
static void shmedia_md_begin (void);
static int shmedia_parse_reg (char *, shmedia_arg_type *, int *,
shmedia_arg_type);
static void shmedia_md_assemble (char *);
static void shmedia_md_apply_fix (fixS *, valueT *);
static int shmedia_md_estimate_size_before_relax (fragS *, segT);
static int shmedia_init_reloc (arelent *, fixS *);
static char *shmedia_get_operands (shmedia_opcode_info *, char *,
shmedia_operands_info *);
static void s_sh64_mode (int);
static void s_sh64_abi (int);
static void shmedia_md_convert_frag (bfd *, segT, fragS *, bfd_boolean);
static void shmedia_check_limits (offsetT *, bfd_reloc_code_real_type,
fixS *);
static void sh64_set_contents_type (enum sh64_elf_cr_type);
static void shmedia_get_operand (char **, shmedia_operand_info *,
shmedia_arg_type);
static unsigned long shmedia_immediate_op (char *, shmedia_operand_info *,
int, bfd_reloc_code_real_type);
static char *shmedia_parse_exp (char *, shmedia_operand_info *);
static void shmedia_frob_file_before_adjust (void);
static void sh64_emit_crange (symbolS *, symbolS *, enum sh64_elf_cr_type);
static void sh64_flush_last_crange (bfd *, asection *, void *);
static void sh64_flag_output (void);
static void sh64_update_contents_mark (bfd_boolean);
static void sh64_vtable_entry (int);
static void sh64_vtable_inherit (int);
static char *strip_datalabels (void);
static int shmedia_build_Mytes (shmedia_opcode_info *,
shmedia_operands_info *);
static shmedia_opcode_info *shmedia_find_cooked_opcode (char **);
static unsigned long shmedia_mask_number (unsigned long,
bfd_reloc_code_real_type);
#include "tc-sh.c"
void
shmedia_md_end (void)
{
symbolS *symp;
/* First, update the last range to include whatever data was last
emitted. */
sh64_update_contents_mark (TRUE);
/* Make sure frags generated after this point are not marked with the
wrong ISA; make them easily spottable. We still want to distinguish
it from sh64_isa_unspecified when we compile for SHcompact or
SHmedia. */
if (sh64_isa_mode != sh64_isa_unspecified)
sh64_isa_mode = sh64_isa_sh5_guard;
sh64_end_of_assembly = TRUE;
bfd_map_over_sections (stdoutput, sh64_flush_last_crange, NULL);
/* Iterate over segments and emit the last .cranges descriptor. */
for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next)
{
symbolS *mainsym = *symbol_get_tc (symp);
/* Is this a datalabel symbol; does it have a pointer to the main
symbol? */
if (mainsym != NULL)
{
/* If the datalabel symbol is undefined, check if the main
symbol has changed in that respect. */
if (S_GET_SEGMENT (symp) == undefined_section)
{
segT symseg;
symseg = S_GET_SEGMENT (mainsym);
/* If the symbol is now defined to something that is not
global and without STO_SH5_ISA32, we just equate the
datalabel symbol to the main symbol, and the lack of
STO_SH5_ISA32 will handle the datalabelness. */
if (symseg != undefined_section)
{
if (S_GET_OTHER (mainsym) != STO_SH5_ISA32)
{
symp->sy_value.X_op = O_symbol;
symp->sy_value.X_add_symbol = mainsym;
symp->sy_value.X_op_symbol = NULL;
symp->sy_value.X_add_number = 0;
S_SET_SEGMENT (symp, S_GET_SEGMENT (mainsym));
symbol_set_frag (symp, &zero_address_frag);
copy_symbol_attributes (symp, mainsym);
}
else
{
/* An undefined symbol has since we saw it at
"datalabel", been defined to a BranchTarget
symbol. What we need to do here is very similar
to when we find the "datalabel" for a defined
symbol. FIXME: Break out to common function. */
symbol_set_value_expression (symp,
symbol_get_value_expression
(mainsym));
S_SET_SEGMENT (symp, symseg);
symbol_set_frag (symp, symbol_get_frag (mainsym));
copy_symbol_attributes (symp, mainsym);
/* Unset the BranchTarget mark that can be set at
attribute-copying. */
S_SET_OTHER (symp,
S_GET_OTHER (symp) & ~STO_SH5_ISA32);
/* The GLOBAL and WEAK attributes are not copied
over by copy_symbol_attributes. Do it here. */
if (S_IS_WEAK (mainsym))
S_SET_WEAK (symp);
else if (S_IS_EXTERNAL (mainsym))
S_SET_EXTERNAL (symp);
}
}
else
{
/* A symbol that was defined at the time we saw
"datalabel" can since have been attributed with being
weak or global. */
if (S_IS_WEAK (mainsym))
S_SET_WEAK (symp);
else if (S_IS_EXTERNAL (mainsym))
S_SET_EXTERNAL (symp);
}
}
}
}
for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next)
if (S_GET_OTHER (symp) & STO_SH5_ISA32)
symp->sy_value.X_add_number++;
}
/* When resolving symbols, the main assembler has done us a misfavour. It
has removed the equation to the main symbol for a datalabel reference
that should be equal to the main symbol, e.g. when it's a global or
weak symbol and is a non-BranchTarget symbol anyway. We change that
back, so that relocs are against the main symbol, not the local "section
+ offset" value. */
static void
shmedia_frob_file_before_adjust (void)
{
symbolS *symp;
for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next)
{
symbolS *mainsym = *symbol_get_tc (symp);
if (mainsym != NULL
&& S_GET_OTHER (mainsym) != STO_SH5_ISA32
&& (S_IS_EXTERNAL (mainsym) || S_IS_WEAK (mainsym)))
{
symp->sy_value.X_op = O_symbol;
symp->sy_value.X_add_symbol = mainsym;
symp->sy_value.X_op_symbol = NULL;
symp->sy_value.X_add_number = 0;
/* For the "equation trick" to work, we have to set the section
to undefined. */
S_SET_SEGMENT (symp, undefined_section);
symbol_set_frag (symp, &zero_address_frag);
copy_symbol_attributes (symp, mainsym);
/* Don't forget to remove the STO_SH5_ISA32 attribute after
copying the other attributes. */
S_SET_OTHER (symp, S_GET_OTHER (symp) & ~STO_SH5_ISA32);
}
}
}
/* We need to mark the current location after the alignment. This is
copied code the caller, do_align. We mark the frag location before and
after as we need and arrange to skip the same code in do_align.
An alternative to code duplication is to call the do_align recursively,
arranging to fall through into do_align if we're already here. That
would require do_align as an incoming function parameter, since it's
static in read.c. That solution was discarded a too kludgy. */
void
sh64_do_align (int n, const char *fill, int len, int max)
{
/* Update region, or put a data region in front. */
sh64_update_contents_mark (TRUE);
/* Only make a frag if we HAVE to... */
if (n != 0 && !need_pass_2)
{
if (fill == NULL)
{
if (subseg_text_p (now_seg))
frag_align_code (n, max);
else
frag_align (n, 0, max);
}
else if (len <= 1)
frag_align (n, *fill, max);
else
frag_align_pattern (n, fill, len, max);
}
/* Update mark for current region with current type. */
sh64_update_contents_mark (FALSE);
}
/* The MAX_MEM_FOR_RS_ALIGN_CODE worker. We have to find out the ISA of
the current segment at this position. We can't look just at
sh64_isa_shmedia, and we can't look at frag_now. This is brittle:
callers are currently frag_align_code from subsegs_finish in write.c
(end of assembly) and frag_align_code from do_align in read.c (during
assembly). */
int
sh64_max_mem_for_rs_align_code (void)
{
segment_info_type *seginfo;
fragS *mode_start_frag;
seginfo = seg_info (now_seg);
/* We don't use the contents type we find at the tc_segment_info_data,
since that does not give us absolute information about the ISA; the
contents type can presumably be CRT_DATA and we'd be none the wiser.
Instead we use the information stored at the frag of the symbol at
the start of this range. If any information is missing or NULL,
assume SHcompact. */
return
/* If the current ISA mode is SHmedia, that's the mode that we're
going to assign to the new frag, so request enough memory for
it, even if we switch modes afterwards, otherwise we may
allocate too little memory and end up overflowing our buffer. */
(sh64_isa_mode == sh64_isa_shmedia
|| (sh64_isa_mode != sh64_isa_unspecified
&& seginfo != NULL
&& seginfo->tc_segment_info_data.mode_start_symbol != NULL
&& ((mode_start_frag
= (symbol_get_frag
(seginfo->tc_segment_info_data.mode_start_symbol)))
!= NULL)
&& mode_start_frag->tc_frag_data.isa == sh64_isa_shmedia))
? (3 + 4) : (2 + 1);
}
/* Put in SHmedia NOP:s if the alignment was created when in SHmedia mode. */
void
sh64_handle_align (fragS * frag)
{
int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix;
char * p = frag->fr_literal + frag->fr_fix;
if (frag->tc_frag_data.isa == sh64_isa_shmedia
&& frag->fr_type == rs_align_code)
{
while (bytes & 3)
{
*p++ = 0;
bytes--;
frag->fr_fix += 1;
}
if (target_big_endian)
{
memcpy (p, shmedia_big_nop_pattern,
sizeof shmedia_big_nop_pattern);
frag->fr_var = sizeof shmedia_big_nop_pattern;
}
else
{
memcpy (p, shmedia_little_nop_pattern,
sizeof shmedia_little_nop_pattern);
frag->fr_var = sizeof shmedia_little_nop_pattern;
}
}
else
/* Punt to SHcompact function. */
sh_handle_align (frag);
}
/* Set SEC_SH64_ISA32 for SHmedia sections. */
void
shmedia_frob_section_type (asection *sec)
{
segment_info_type *seginfo;
seginfo = seg_info (sec);
/* This and elf32-sh64.c:sh64_elf_fake_sections are the only places
where we use anything else than ELF header flags to communicate the
section as containing SHmedia or other contents. BFD SEC_* section
flags are running out and should not be overloaded with
target-specific semantics. This target is ELF only (semantics not
defined for other formats), so we use the target-specific pointer
field of the ELF section data. */
if (seginfo && sh64_abi == sh64_abi_32)
{
struct sh64_section_data *sec_elf_data;
flagword sec_type = 0;
if (seginfo->tc_segment_info_data.emitted_ranges != 0)
sec_type = SHF_SH5_ISA32_MIXED;
else if (seginfo->tc_segment_info_data.contents_type == CRT_SH5_ISA32)
sec_type = SHF_SH5_ISA32;
sec_elf_data = sh64_elf_section_data (sec)->sh64_info;
if (sec_elf_data == NULL)
{
sec_elf_data = XCNEW (struct sh64_section_data);
sh64_elf_section_data (sec)->sh64_info = sec_elf_data;
}
sec_elf_data->contents_flags = sec_type;
}
}
/* This function is called by write_object_file right before the symbol
table is written. We subtract 1 from all symbols marked STO_SH5_ISA32,
as their values are temporarily incremented in shmedia_md_end, before
symbols values are used by relocs and fixups.
To increment all symbols and then decrement here is admittedly a
hackish solution. The alternative is to add infrastructure and hooks
to symbol evaluation that evaluates symbols differently internally to
the value output into the object file, but at the moment that just
seems too much for little benefit. */
void
sh64_adjust_symtab (void)
{
symbolS *symp;
for (symp = symbol_rootP; symp; symp = symbol_next (symp))
{
symbolS *main_symbol = *symbol_get_tc (symp);
if (main_symbol)
{
char *sym_name = (char *) S_GET_NAME (symp);
/* All datalabels not used in relocs should be gone by now.
We change those remaining to have the name of the main
symbol, and we set the ELF type of the symbol of the reloc to
STT_DATALABEL. */
sym_name[strlen (sym_name) - strlen (DATALABEL_SUFFIX)] = 0;
elf_symbol (symbol_get_bfdsym (symp))->internal_elf_sym.st_info
= STT_DATALABEL;
/* Also set this symbol to "undefined", so we'll have only one
definition. */
S_SET_SEGMENT (symp, undefined_section);
}
else if (S_GET_OTHER (symp) & STO_SH5_ISA32)
{
/* It's important to change the BFD symbol value, since it is now
set to the GAS symbolS value. */
symp->bsym->value--;
/* Note that we do *not* adjust symp->sy_value.X_add_number. If
you do this, the test case in sh/sh64/immexpr2.s will fail.
This is because *after* symbols have been output but before
relocs are output, fixups are inspected one more time, and
some leftover expressions are resolved. To resolve to the
same values, those expressions must have the same GAS symbol
values before as after symbols have been output. We could
"symp->sy_value.X_add_number++" on the STO_SH5_ISA32 symbols
through tc_frob_file after symbols have been output, but that
would be too gross. */
}
}
}
/* Fill-in an allocated arelent. */
static int
shmedia_init_reloc (arelent *rel, fixS *fixP)
{
/* Adjust parts of *relp according to *fixp, and tell that it has been
done, so default initializations will not happen. */
switch (fixP->fx_r_type)
{
case BFD_RELOC_64:
case BFD_RELOC_64_PCREL:
case BFD_RELOC_SH_IMM_LOW16:
case BFD_RELOC_SH_IMM_MEDLOW16:
case BFD_RELOC_SH_IMM_MEDHI16:
case BFD_RELOC_SH_IMM_HI16:
case BFD_RELOC_SH_IMM_LOW16_PCREL:
case BFD_RELOC_SH_IMM_MEDLOW16_PCREL:
case BFD_RELOC_SH_IMM_MEDHI16_PCREL:
case BFD_RELOC_SH_IMM_HI16_PCREL:
case BFD_RELOC_SH_IMMU5:
case BFD_RELOC_SH_IMMU6:
case BFD_RELOC_SH_IMMS6:
case BFD_RELOC_SH_IMMS10:
case BFD_RELOC_SH_IMMS10BY2:
case BFD_RELOC_SH_IMMS10BY4:
case BFD_RELOC_SH_IMMS10BY8:
case BFD_RELOC_SH_IMMS16:
case BFD_RELOC_SH_IMMU16:
case BFD_RELOC_SH_PT_16:
case BFD_RELOC_SH_GOT_LOW16:
case BFD_RELOC_SH_GOT_MEDLOW16:
case BFD_RELOC_SH_GOT_MEDHI16:
case BFD_RELOC_SH_GOT_HI16:
case BFD_RELOC_SH_GOT10BY4:
case BFD_RELOC_SH_GOT10BY8:
case BFD_RELOC_SH_GOTPLT_LOW16:
case BFD_RELOC_SH_GOTPLT_MEDLOW16:
case BFD_RELOC_SH_GOTPLT_MEDHI16:
case BFD_RELOC_SH_GOTPLT_HI16:
case BFD_RELOC_SH_GOTPLT10BY4:
case BFD_RELOC_SH_GOTPLT10BY8:
case BFD_RELOC_SH_GOTOFF_LOW16:
case BFD_RELOC_SH_GOTOFF_MEDLOW16:
case BFD_RELOC_SH_GOTOFF_MEDHI16:
case BFD_RELOC_SH_GOTOFF_HI16:
case BFD_RELOC_SH_GOTPC_LOW16:
case BFD_RELOC_SH_GOTPC_MEDLOW16:
case BFD_RELOC_SH_GOTPC_MEDHI16:
case BFD_RELOC_SH_GOTPC_HI16:
case BFD_RELOC_SH_PLT_LOW16:
case BFD_RELOC_SH_PLT_MEDLOW16:
case BFD_RELOC_SH_PLT_MEDHI16:
case BFD_RELOC_SH_PLT_HI16:
rel->addend = fixP->fx_addnumber + fixP->fx_offset;
return 1;
case BFD_RELOC_SH_IMMS6BY32:
/* This must be resolved in assembly; we do not support it as a
reloc in an object file. */
as_bad_where (fixP->fx_file, fixP->fx_line,
_("This operand must be constant at assembly time"));
break;
/* There are valid cases where we get here for other than SHmedia
relocs, so don't make a BAD_CASE out of this. */
default:
;
}
return 0;
}
/* Hook called from md_apply_fix in tc-sh.c. */
static void
shmedia_md_apply_fix (fixS *fixP, valueT *valp)
{
offsetT val = *valp;
char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
unsigned long insn
= target_big_endian ? bfd_getb32 (buf) : bfd_getl32 (buf);
bfd_reloc_code_real_type orig_fx_r_type = fixP->fx_r_type;
/* Change a 64-bit pc-relative reloc into the correct type, just like
tc-sh.c:md_apply_fix. */
if (fixP->fx_pcrel)
{
switch (orig_fx_r_type)
{
case BFD_RELOC_64:
case BFD_RELOC_SH_IMM_LOW16:
case BFD_RELOC_SH_IMM_MEDLOW16:
case BFD_RELOC_SH_IMM_MEDHI16:
case BFD_RELOC_SH_IMM_HI16:
/* Because write.c calls MD_PCREL_FROM_SECTION twice, we need to
undo one of the adjustments, if the relocation is not
actually for a symbol within the same segment (which we
cannot check, because we're not called from md_apply_fix, so
we have to keep the reloc). FIXME: This is a bug in
write.c:fixup_segment affecting most targets that change
ordinary relocs to pcrel relocs in md_apply_fix. */
fixP->fx_offset
= *valp + SHMEDIA_MD_PCREL_FROM_FIX (fixP);
break;
case BFD_RELOC_SH_PLT_LOW16:
case BFD_RELOC_SH_PLT_MEDLOW16:
case BFD_RELOC_SH_PLT_MEDHI16:
case BFD_RELOC_SH_PLT_HI16:
case BFD_RELOC_SH_GOTPC_LOW16:
case BFD_RELOC_SH_GOTPC_MEDLOW16:
case BFD_RELOC_SH_GOTPC_MEDHI16:
case BFD_RELOC_SH_GOTPC_HI16:
*valp = 0;
return;
default:
;
}
/* We might need to change some relocs into the corresponding
PC-relative one. */
switch (orig_fx_r_type)
{
case BFD_RELOC_64:
fixP->fx_r_type = BFD_RELOC_64_PCREL;
break;
case BFD_RELOC_SH_IMM_LOW16:
fixP->fx_r_type = BFD_RELOC_SH_IMM_LOW16_PCREL;
break;
case BFD_RELOC_SH_IMM_MEDLOW16:
fixP->fx_r_type = BFD_RELOC_SH_IMM_MEDLOW16_PCREL;
break;
case BFD_RELOC_SH_IMM_MEDHI16:
fixP->fx_r_type = BFD_RELOC_SH_IMM_MEDHI16_PCREL;
break;
case BFD_RELOC_SH_IMM_HI16:
fixP->fx_r_type = BFD_RELOC_SH_IMM_HI16_PCREL;
break;
case SHMEDIA_BFD_RELOC_PT:
/* This is how we see a difference between PT and PTA when not
expanding (in which case we handle it in
shmedia_md_convert_frag). Note that we don't see a
difference after the reloc is emitted. */
fixP->fx_r_type = BFD_RELOC_SH_PT_16;
break;
case BFD_RELOC_SH_PT_16:
/* This tells us there was a PTA or PTB insn explicitly
expressed as such (not as PT). We "or" in a 1 into the
lowest bit in the (unused) destination field to tell the
linker that it should check the right ISA type of the
destination and not just change a PTA to PTB (if necessary). */
md_number_to_chars (buf, insn | (1 << 10), 4);
break;
case BFD_RELOC_64_PCREL:
case BFD_RELOC_SH_IMM_LOW16_PCREL:
case BFD_RELOC_SH_IMM_MEDLOW16_PCREL:
case BFD_RELOC_SH_IMM_MEDHI16_PCREL:
case BFD_RELOC_SH_IMM_HI16_PCREL:
/* Already handled. */
break;
default:
/* Everything else that changes into a pc-relative relocation is
an error. */
as_bad_where (fixP->fx_file, fixP->fx_line,
_("Invalid operand expression"));
break;
}
return;
}
/* If an expression looked like it was PC-relative, but was completely
resolvable, we end up here with the result only in *VALP, and no
relocation will be emitted. */
if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0)
{
/* Emit error for an out-of-range value. */
shmedia_check_limits ((offsetT *) valp, fixP->fx_r_type, fixP);
switch (fixP->fx_r_type)
{
case BFD_RELOC_SH_IMM_LOW16:
md_number_to_chars (buf, insn | ((val & 65535) << 10), 4);
break;
case BFD_RELOC_SH_IMM_MEDLOW16:
md_number_to_chars (buf,
insn
| ((valueT) (val & ((valueT) 65535 << 16))
>> (16 - 10)), 4);
break;
case BFD_RELOC_SH_IMM_MEDHI16:
md_number_to_chars (buf,
insn
| ((valueT) (val & ((valueT) 65535 << 32))
>> (32 - 10)), 4);
break;
case BFD_RELOC_SH_IMM_HI16:
md_number_to_chars (buf,
insn
| ((valueT) (val & ((valueT) 65535 << 48))
>> (48 - 10)), 4);
break;
case BFD_RELOC_SH_IMMS16:
case BFD_RELOC_SH_IMMU16:
md_number_to_chars (buf, insn | ((val & 65535) << 10), 4);
break;
case BFD_RELOC_SH_IMMS10:
md_number_to_chars (buf, insn | ((val & 0x3ff) << 10), 4);
break;
case BFD_RELOC_SH_IMMS10BY2:
md_number_to_chars (buf,
insn | ((val & (0x3ff << 1)) << (10 - 1)), 4);
break;
case BFD_RELOC_SH_IMMS10BY4:
md_number_to_chars (buf,
insn | ((val & (0x3ff << 2)) << (10 - 2)), 4);
break;
case BFD_RELOC_SH_IMMS10BY8:
md_number_to_chars (buf,
insn | ((val & (0x3ff << 3)) << (10 - 3)), 4);
break;
case BFD_RELOC_SH_SHMEDIA_CODE:
/* We just ignore and remove this one for the moment. FIXME:
Use it when implementing relaxing. */
break;
case BFD_RELOC_64:
md_number_to_chars (buf, val, 8);
break;
case SHMEDIA_BFD_RELOC_PT:
/* Change a PT to PTB if the operand turned out to be SHcompact.
The basic opcode specified with PT is equivalent to PTA. */
if ((val & 1) == 0)
insn |= SHMEDIA_PTB_BIT;
/* Fall through. */
case BFD_RELOC_SH_PT_16:
if (! sh64_expand || sh_relax)
{
/* Check if the operand of a PTA or PTB was for the "wrong"
ISA. A PT had an incoming fixup of SHMEDIA_BFD_RELOC_PT,
which we have changed to the right type above. */
if (orig_fx_r_type != SHMEDIA_BFD_RELOC_PT)
{
if ((insn & SHMEDIA_PTB_BIT) != 0 && (val & 1) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("PTB operand is a SHmedia symbol"));
else if ((insn & SHMEDIA_PTB_BIT) == 0 && (val & 1) == 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("PTA operand is a SHcompact symbol"));
}
md_number_to_chars (buf,
insn | ((val & (0xffff << 2))
<< (10 - 2)),
4);
break;
}
/* Fall through. */
default:
/* This isn't a BAD_CASE, because presumably we can get here
from unexpected operands. Since we don't handle them, make
them syntax errors. */
as_bad_where (fixP->fx_file, fixP->fx_line,
_("invalid expression in operand"));
}
fixP->fx_done = 1;
}
}
/* Hook called from md_convert_frag in tc-sh.c. */
static void
shmedia_md_convert_frag (bfd *output_bfd ATTRIBUTE_UNUSED,
segT seg ATTRIBUTE_UNUSED, fragS *fragP,
bfd_boolean final)
{
/* Pointer to first byte in variable-sized part of the frag. */
char *var_partp;
/* Pointer to first opcode byte in frag. */
char *opcodep;
/* Pointer to frag of opcode. */
fragS *opc_fragP = fragP->tc_frag_data.opc_frag;
/* Size in bytes of variable-sized part of frag. */
int var_part_size = 0;
/* This is part of *fragP. It contains all information about addresses
and offsets to varying parts. */
symbolS *symbolP = fragP->fr_symbol;
bfd_boolean reloc_needed
= (! final
|| sh_relax
|| symbolP == NULL
|| ! S_IS_DEFINED (symbolP)
|| S_IS_EXTERNAL (symbolP)
|| S_IS_WEAK (symbolP)
|| (S_GET_SEGMENT (fragP->fr_symbol) != absolute_section
&& S_GET_SEGMENT (fragP->fr_symbol) != seg));
bfd_reloc_code_real_type reloctype = BFD_RELOC_NONE;
unsigned long var_part_offset;
/* Where, in file space, does addr point? */
bfd_vma target_address;
bfd_vma opcode_address;
/* What was the insn? */
unsigned long insn;
know (fragP->fr_type == rs_machine_dependent);
var_part_offset = fragP->fr_fix;
var_partp = fragP->fr_literal + var_part_offset;
opcodep = fragP->fr_opcode;
insn = target_big_endian ? bfd_getb32 (opcodep) : bfd_getl32 (opcodep);
target_address
= ((symbolP && final && ! sh_relax ? S_GET_VALUE (symbolP) : 0)
+ fragP->fr_offset);
/* The opcode that would be extended is the last four "fixed" bytes. */
opcode_address = fragP->fr_address + fragP->fr_fix - 4;
switch (fragP->fr_subtype)
{
case C (SH64PCREL16PT_64, SH64PCREL16):
case C (SH64PCREL16PT_32, SH64PCREL16):
/* We can get a PT to a relaxed SHcompact address if it is in the
same section; a mixed-ISA section. Change the opcode to PTB if
so. */
if ((target_address & 1) == 0)
insn |= SHMEDIA_PTB_BIT;
/* Fall through. */
case C (SH64PCREL16_32, SH64PCREL16):
case C (SH64PCREL16_64, SH64PCREL16):
/* Check that a PTA or PTB points to the right type of target. We
can get here for a SHcompact target if we are in a mixed-ISA
section. */
if (((target_address & 1) == 0) && ((insn & SHMEDIA_PTB_BIT) == 0))
as_bad_where (fragP->fr_file, fragP->fr_line,
_("PTA operand is a SHcompact symbol"));
if (((target_address & 1) != 0) && ((insn & SHMEDIA_PTB_BIT) != 0))
as_bad_where (fragP->fr_file, fragP->fr_line,
_("PTB operand is a SHmedia symbol"));
/* When relaxing, we do not output the address in the insn, but
instead a 1 into the low bit. This matches what the linker
expects to find for a BFD_RELOC_SH_PT_16 reloc, when it checks
correctness for PTA/PTB insn; used when the target address is
unknown (which is not the case here). */
md_number_to_chars (opcodep,
insn
| (((sh_relax
? 1 : ((target_address - opcode_address) / 4))
& ((1 << 16) - 1)) << 10),
4);
/* Note that we do not emit info that this was originally a PT since
we have resolved to which one of PTA or PTB it will be. */
if (sh_relax)
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_SH_PT_16);
var_part_size = 0;
break;
case C (SH64PCREL16_32, SH64PCRELPLT):
case C (SH64PCREL16PT_32, SH64PCRELPLT):
reloctype = BFD_RELOC_32_PLT_PCREL;
reloc_needed = 1;
/* Fall through */
case C (SH64PCREL16_32, SH64PCREL32):
case C (SH64PCREL16_64, SH64PCREL32):
case C (SH64PCREL16PT_32, SH64PCREL32):
case C (SH64PCREL16PT_64, SH64PCREL32):
/* In the fixed bit, put in a MOVI. */
md_number_to_chars (opcodep,
SHMEDIA_MOVI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 8))
) >> 16) & 65535) << 10),
4);
/* Fill in a SHORI for the low part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| (((reloc_needed
? 0 : (target_address - (opcode_address + 8)))
& 65535) << 10),
4);
/* End with a "PTREL R25,TRd". */
md_number_to_chars (var_partp + 4,
SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT)
| (SHMEDIA_TEMP_REG << 10)
| (insn & (7 << 4)),
4);
/* We need relocs only if the target symbol was undefined or if
we're relaxing. */
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset - 8, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: BFD_RELOC_SH_IMM_MEDLOW16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset - 4, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: BFD_RELOC_SH_IMM_LOW16_PCREL);
}
var_part_size = 8;
break;
case C (SH64PCREL16_64, SH64PCREL48):
case C (SH64PCREL16PT_64, SH64PCREL48):
/* In the fixed bit, put in a MOVI. */
md_number_to_chars (opcodep,
SHMEDIA_MOVI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 12))
) >> 32) & 65535) << 10),
4);
/* The first SHORI, for the medium part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 12))
) >> 16) & 65535) << 10),
4);
/* Fill in a SHORI for the low part. */
md_number_to_chars (var_partp + 4,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| (((reloc_needed
? 0 : (target_address - (opcode_address + 12)))
& 65535) << 10),
4);
/* End with a "PTREL R25,TRd". */
md_number_to_chars (var_partp + 8,
SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT)
| (SHMEDIA_TEMP_REG << 10)
| (insn & (7 << 4)),
4);
/* We need relocs only if the target symbol was undefined or if
we're relaxing. */
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset - 12, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDHI16
: BFD_RELOC_SH_IMM_MEDHI16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset - 8, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: BFD_RELOC_SH_IMM_MEDLOW16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol,
fragP->fr_offset - 4, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: BFD_RELOC_SH_IMM_LOW16_PCREL);
}
var_part_size = 12;
break;
case C (SH64PCREL16_64, SH64PCRELPLT):
case C (SH64PCREL16PT_64, SH64PCRELPLT):
reloctype = BFD_RELOC_32_PLT_PCREL;
reloc_needed = 1;
/* Fall through */
case C (SH64PCREL16_64, SH64PCREL64):
case C (SH64PCREL16PT_64, SH64PCREL64):
/* In the fixed bit, put in a MOVI. */
md_number_to_chars (opcodep,
SHMEDIA_MOVI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 16))
) >> 48) & 65535) << 10),
4);
/* The first SHORI, for the medium-high part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 16))
) >> 32) & 65535) << 10),
4);
/* A SHORI, for the medium-low part. */
md_number_to_chars (var_partp + 4,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| ((((reloc_needed
? 0 : (target_address - (opcode_address + 16))
) >> 16) & 65535) << 10),
4);
/* Fill in a SHORI for the low part. */
md_number_to_chars (var_partp + 8,
SHMEDIA_SHORI_OPC
| (SHMEDIA_TEMP_REG << 4)
| (((reloc_needed
? 0 : (target_address - (opcode_address + 16)))
& 65535) << 10),
4);
/* End with a "PTREL R25,TRd". */
md_number_to_chars (var_partp + 12,
SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT)
| (SHMEDIA_TEMP_REG << 10)
| (insn & (7 << 4)),
4);
/* We need relocs only if the target symbol was undefined or if
we're relaxing. */
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset - 16, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_HI16
: BFD_RELOC_SH_IMM_HI16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset - 12, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDHI16
: BFD_RELOC_SH_IMM_MEDHI16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol,
fragP->fr_offset - 8, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: BFD_RELOC_SH_IMM_MEDLOW16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal + 8, 4, fragP->fr_symbol,
fragP->fr_offset - 4, 1,
reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: BFD_RELOC_SH_IMM_LOW16_PCREL);
}
var_part_size = 16;
break;
case C (MOVI_IMM_64, MOVI_GOTOFF):
reloctype = BFD_RELOC_32_GOTOFF;
reloc_needed = 1;
/* Fall through. */
case C (MOVI_IMM_64, UNDEF_MOVI):
case C (MOVI_IMM_64, MOVI_64):
{
/* We only get here for undefined symbols, so we can simplify
handling compared to those above; we have 0 in the parts that
will be filled with the symbol parts. */
int reg = (insn >> 4) & 0x3f;
/* In the fixed bit, put in a MOVI. */
md_number_to_chars (opcodep, SHMEDIA_MOVI_OPC | (reg << 4), 4);
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_HI16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_HI16
: (abort (), BFD_RELOC_SH_IMM_HI16));
/* The first SHORI, for the medium-high part. */
md_number_to_chars (var_partp, SHMEDIA_SHORI_OPC | (reg << 4), 4);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDHI16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_MEDHI16
: (abort (), BFD_RELOC_SH_IMM_MEDHI16));
/* A SHORI, for the medium-low part. */
md_number_to_chars (var_partp + 4,
SHMEDIA_SHORI_OPC | (reg << 4), 4);
fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol,
fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDLOW16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_MEDLOW16
: (abort (), BFD_RELOC_SH_IMM_MEDLOW16));
/* Fill in a SHORI for the low part. */
md_number_to_chars (var_partp + 8,
SHMEDIA_SHORI_OPC | (reg << 4), 4);
fix_new (fragP, var_partp - fragP->fr_literal + 8, 4, fragP->fr_symbol,
fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_LOW16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_LOW16
: (abort (), BFD_RELOC_SH_IMM_LOW16));
var_part_size = 12;
break;
}
case C (MOVI_IMM_32, MOVI_GOTOFF):
reloctype = BFD_RELOC_32_GOTOFF;
reloc_needed = 1;
/* Fall through. */
case C (MOVI_IMM_32, UNDEF_MOVI):
case C (MOVI_IMM_32, MOVI_32):
{
/* Note that we only get here for undefined symbols. */
int reg = (insn >> 4) & 0x3f;
/* A MOVI, for the high part. */
md_number_to_chars (opcodep, SHMEDIA_MOVI_OPC | (reg << 4), 4);
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDLOW16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_MEDLOW16
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_MEDLOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: (abort (), BFD_RELOC_SH_IMM_MEDLOW16));
/* Fill in a SHORI for the low part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC | (reg << 4), 4);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset, 0,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_LOW16
: reloctype == BFD_RELOC_32_GOTOFF
? BFD_RELOC_SH_GOTOFF_LOW16
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_LOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: (abort (), BFD_RELOC_SH_IMM_LOW16));
var_part_size = 4;
break;
}
case C (MOVI_IMM_32_PCREL, MOVI_16):
case C (MOVI_IMM_64_PCREL, MOVI_16):
md_number_to_chars (opcodep,
insn
| (((reloc_needed
? 0 : (target_address - opcode_address))
& 65535) << 10),
4);
if (reloc_needed)
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 1,
BFD_RELOC_SH_IMM_LOW16_PCREL);
var_part_size = 0;
break;
case C (MOVI_IMM_32, MOVI_16):
case C (MOVI_IMM_64, MOVI_16):
md_number_to_chars (opcodep,
insn
| (((reloc_needed ? 0 : target_address)
& 65535) << 10),
4);
if (reloc_needed)
abort ();
var_part_size = 0;
break;
case C (MOVI_IMM_32_PCREL, MOVI_PLT):
reloctype = BFD_RELOC_32_PLT_PCREL;
goto movi_imm_32_pcrel_reloc_needed;
case C (MOVI_IMM_32_PCREL, MOVI_GOTPC):
reloctype = BFD_RELOC_SH_GOTPC;
/* Fall through. */
movi_imm_32_pcrel_reloc_needed:
reloc_needed = 1;
/* Fall through. */
case C (MOVI_IMM_32_PCREL, MOVI_32):
case C (MOVI_IMM_64_PCREL, MOVI_32):
{
int reg = (insn >> 4) & 0x3f;
md_number_to_chars (opcodep,
insn
| (((((reloc_needed
? 0 : (target_address - opcode_address)))
>> 16) & 65535) << 10), 4);
/* A SHORI, for the low part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((reloc_needed
? 0 : (target_address - opcode_address))
& 65535) << 10), 4);
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDLOW16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_MEDLOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: (abort (), BFD_RELOC_SH_IMM_MEDLOW16_PCREL));
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset + 4, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_LOW16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_LOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: (abort (), BFD_RELOC_SH_IMM_LOW16_PCREL));
}
var_part_size = 4;
}
break;
case C (MOVI_IMM_32_PCREL, MOVI_48):
case C (MOVI_IMM_64_PCREL, MOVI_48):
{
int reg = (insn >> 4) & 0x3f;
md_number_to_chars (opcodep,
insn
| (((((reloc_needed
? 0 : (target_address - opcode_address)))
>> 32) & 65535) << 10), 4);
/* A SHORI, for the medium part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((((reloc_needed
? 0 : (target_address - opcode_address))
>> 16) & 65535) << 10), 4);
/* A SHORI, for the low part. */
md_number_to_chars (var_partp + 4,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((reloc_needed
? 0 : (target_address - opcode_address))
& 65535) << 10), 4);
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 1,
BFD_RELOC_SH_IMM_MEDHI16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset + 4, 1, BFD_RELOC_SH_IMM_MEDLOW16_PCREL);
fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol,
fragP->fr_offset + 8, 1, BFD_RELOC_SH_IMM_LOW16_PCREL);
}
var_part_size = 8;
}
break;
case C (MOVI_IMM_64_PCREL, MOVI_PLT):
reloctype = BFD_RELOC_32_PLT_PCREL;
goto movi_imm_64_pcrel_reloc_needed;
case C (MOVI_IMM_64_PCREL, MOVI_GOTPC):
reloctype = BFD_RELOC_SH_GOTPC;
/* Fall through. */
movi_imm_64_pcrel_reloc_needed:
reloc_needed = 1;
/* Fall through. */
case C (MOVI_IMM_32_PCREL, MOVI_64):
case C (MOVI_IMM_64_PCREL, MOVI_64):
{
int reg = (insn >> 4) & 0x3f;
md_number_to_chars (opcodep,
insn
| (((((reloc_needed
? 0 : (target_address - opcode_address)))
>> 48) & 65535) << 10), 4);
/* A SHORI, for the medium-high part. */
md_number_to_chars (var_partp,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((((reloc_needed
? 0 : (target_address - opcode_address))
>> 32) & 65535) << 10), 4);
/* A SHORI, for the medium-low part. */
md_number_to_chars (var_partp + 4,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((((reloc_needed
? 0 : (target_address - opcode_address))
>> 16) & 65535) << 10), 4);
/* A SHORI, for the low part. */
md_number_to_chars (var_partp + 8,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((reloc_needed
? 0 : (target_address - opcode_address))
& 65535) << 10), 4);
if (reloc_needed)
{
fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4,
fragP->fr_symbol, fragP->fr_offset, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_HI16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_HI16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_HI16
: (abort (), BFD_RELOC_SH_IMM_HI16_PCREL));
fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol,
fragP->fr_offset + 4, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDHI16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_MEDHI16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDHI16
: (abort (), BFD_RELOC_SH_IMM_MEDHI16_PCREL));
fix_new (fragP, var_partp - fragP->fr_literal + 4, 4,
fragP->fr_symbol,
fragP->fr_offset + 8, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_MEDLOW16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_MEDLOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_MEDLOW16
: (abort (), BFD_RELOC_SH_IMM_MEDLOW16_PCREL));
fix_new (fragP, var_partp - fragP->fr_literal + 8, 4,
fragP->fr_symbol,
fragP->fr_offset + 12, 1,
reloctype == BFD_RELOC_NONE
? BFD_RELOC_SH_IMM_LOW16_PCREL
: reloctype == BFD_RELOC_SH_GOTPC
? BFD_RELOC_SH_GOTPC_LOW16
: reloctype == BFD_RELOC_32_PLT_PCREL
? BFD_RELOC_SH_PLT_LOW16
: (abort (), BFD_RELOC_SH_IMM_LOW16_PCREL));
}
var_part_size = 12;
}
break;
default:
BAD_CASE (fragP->fr_subtype);
}
fragP->fr_fix += var_part_size;
fragP->fr_var = 0;
}
/* Mask NUMBER (originating from a signed number) corresponding to the HOW
reloc. */
static unsigned long
shmedia_mask_number (unsigned long number, bfd_reloc_code_real_type how)
{
switch (how)
{
case BFD_RELOC_SH_IMMU5:
number &= (1 << 5) - 1;
break;
case BFD_RELOC_SH_IMMS6:
case BFD_RELOC_SH_IMMU6:
number &= (1 << 6) - 1;
break;
case BFD_RELOC_SH_IMMS6BY32:
number = (number & ((1 << (6 + 5)) - 1)) >> 5;
break;
case BFD_RELOC_SH_IMMS10:
number &= (1 << 10) - 1;
break;
case BFD_RELOC_SH_IMMS10BY2:
number = (number & ((1 << (10 + 1)) - 1)) >> 1;
break;
case BFD_RELOC_SH_IMMS10BY4:
number = (number & ((1 << (10 + 2)) - 1)) >> 2;
break;
case BFD_RELOC_SH_IMMS10BY8:
number = (number & ((1 << (10 + 3)) - 1)) >> 3;
break;
case BFD_RELOC_SH_IMMS16:
case BFD_RELOC_SH_IMMU16:
number &= (1 << 16) - 1;
break;
default:
BAD_CASE (how);
}
return number;
}
/* Emit errors for values out-of-range, using as_bad_where if FRAGP is
non-NULL, as_bad otherwise. */
static void
shmedia_check_limits (offsetT *valp, bfd_reloc_code_real_type reloc,
fixS *fixp)
{
offsetT val = *valp;
const char *msg = NULL;
switch (reloc)
{
case BFD_RELOC_SH_IMMU5:
if (val < 0 || val > (1 << 5) - 1)
msg = _("invalid operand, not a 5-bit unsigned value: %d");
break;
case BFD_RELOC_SH_IMMS6:
if (val < -(1 << 5) || val > (1 << 5) - 1)
msg = _("invalid operand, not a 6-bit signed value: %d");
break;
case BFD_RELOC_SH_IMMU6:
if (val < 0 || val > (1 << 6) - 1)
msg = _("invalid operand, not a 6-bit unsigned value: %d");
break;
case BFD_RELOC_SH_IMMS6BY32:
if (val < -(1 << 10) || val > (1 << 10) - 1)
msg = _("invalid operand, not a 11-bit signed value: %d");
else if (val & 31)
msg = _("invalid operand, not a multiple of 32: %d");
break;
case BFD_RELOC_SH_IMMS10:
if (val < -(1 << 9) || val > (1 << 9) - 1)
msg = _("invalid operand, not a 10-bit signed value: %d");
break;
case BFD_RELOC_SH_IMMS10BY2:
if (val < -(1 << 10) || val > (1 << 10) - 1)
msg = _("invalid operand, not a 11-bit signed value: %d");
else if (val & 1)
msg = _("invalid operand, not an even value: %d");
break;
case BFD_RELOC_SH_IMMS10BY4:
if (val < -(1 << 11) || val > (1 << 11) - 1)
msg = _("invalid operand, not a 12-bit signed value: %d");
else if (val & 3)
msg = _("invalid operand, not a multiple of 4: %d");
break;
case BFD_RELOC_SH_IMMS10BY8:
if (val < -(1 << 12) || val > (1 << 12) - 1)
msg = _("invalid operand, not a 13-bit signed value: %d");
else if (val & 7)
msg = _("invalid operand, not a multiple of 8: %d");
break;
case BFD_RELOC_SH_IMMS16:
if (val < -(1 << 15) || val > (1 << 15) - 1)
msg = _("invalid operand, not a 16-bit signed value: %d");
break;
case BFD_RELOC_SH_IMMU16:
if (val < 0 || val > (1 << 16) - 1)
msg = _("invalid operand, not a 16-bit unsigned value: %d");
break;
case BFD_RELOC_SH_PT_16:
case SHMEDIA_BFD_RELOC_PT:
if (val < -(1 << 15) * 4 || val > ((1 << 15) - 1) * 4 + 1)
msg = _("operand out of range for PT, PTA and PTB");
else if ((val % 4) != 0 && ((val - 1) % 4) != 0)
msg = _("operand not a multiple of 4 for PT, PTA or PTB: %d");
break;
/* These have no limits; they take a 16-bit slice of a 32- or 64-bit
number. */
case BFD_RELOC_SH_IMM_HI16:
case BFD_RELOC_SH_IMM_MEDHI16:
case BFD_RELOC_SH_IMM_MEDLOW16:
case BFD_RELOC_SH_IMM_LOW16:
case BFD_RELOC_SH_IMM_HI16_PCREL:
case BFD_RELOC_SH_IMM_MEDHI16_PCREL:
case BFD_RELOC_SH_IMM_MEDLOW16_PCREL:
case BFD_RELOC_SH_IMM_LOW16_PCREL:
case BFD_RELOC_SH_SHMEDIA_CODE:
break;
/* This one has limits out of our reach. */
case BFD_RELOC_64:
break;
default:
BAD_CASE (reloc);
}
if (msg)
{
if (fixp)
as_bad_where (fixp->fx_file, fixp->fx_line, msg, val);
else
as_bad (msg, val);
}
}
/* Handle an immediate operand by checking limits and noting it for later
evaluation if not computable yet, and return a bitfield suitable to
"or" into the opcode (non-zero if the value was a constant number). */
static unsigned long
shmedia_immediate_op (char *where, shmedia_operand_info *op, int pcrel,
bfd_reloc_code_real_type how)
{
unsigned long retval = 0;
/* If this is not an absolute number, make it a fixup. A constant in
place of a pc-relative operand also needs a fixup. */
if (op->immediate.X_op != O_constant || pcrel)
fix_new_exp (frag_now,
where - frag_now->fr_literal,
4,
&op->immediate,
pcrel,
how);
else
{
/* Check that the number is within limits as represented by the
reloc, and return the number. */
shmedia_check_limits (&op->immediate.X_add_number, how, NULL);
retval
= shmedia_mask_number ((unsigned long) op->immediate.X_add_number,
how);
}
return retval << 10;
}
/* Try and parse a register name case-insensitively, return the number of
chars consumed. */
static int
shmedia_parse_reg (char *src, shmedia_arg_type *mode, int *reg,
shmedia_arg_type argtype)
{
int l0 = TOLOWER (src[0]);
int l1 = l0 ? TOLOWER (src[1]) : 0;
if (l0 == 'r')
{
if (src[1] >= '1' && src[1] <= '5')
{
if (src[2] >= '0' && src[2] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_GREG_M;
*reg = 10 * (src[1] - '0') + src[2] - '0';
return 3;
}
}
if (src[1] == '6')
{
if (src[2] >= '0' && src[2] <= '3'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_GREG_M;
*reg = 60 + src[2] - '0';
return 3;
}
}
if (src[1] >= '0' && src[1] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[2]))
{
*mode = A_GREG_M;
*reg = (src[1] - '0');
return 2;
}
}
if (l0 == 't' && l1 == 'r')
{
if (src[2] >= '0' && src[2] <= '7'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_TREG_B;
*reg = (src[2] - '0');
return 3;
}
}
if (l0 == 'f' && l1 == 'r')
{
if (src[2] >= '1' && src[2] <= '5')
{
if (src[3] >= '0' && src[3] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FREG_G;
*reg = 10 * (src[2] - '0') + src[3] - '0';
return 4;
}
}
if (src[2] == '6')
{
if (src[3] >= '0' && src[3] <= '3'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FREG_G;
*reg = 60 + src[3] - '0';
return 4;
}
}
if (src[2] >= '0' && src[2] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_FREG_G;
*reg = (src[2] - '0');
return 3;
}
}
if (l0 == 'f' && l1 == 'v')
{
if (src[2] >= '1' && src[2] <= '5')
{
if (src[3] >= '0' && src[3] <= '9'
&& ((10 * (src[2] - '0') + src[3] - '0') % 4) == 0
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FVREG_G;
*reg = 10 * (src[2] - '0') + src[3] - '0';
return 4;
}
}
if (src[2] == '6')
{
if (src[3] == '0'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FVREG_G;
*reg = 60 + src[3] - '0';
return 4;
}
}
if (src[2] >= '0' && src[2] <= '9'
&& ((src[2] - '0') % 4) == 0
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_FVREG_G;
*reg = (src[2] - '0');
return 3;
}
}
if (l0 == 'd' && l1 == 'r')
{
if (src[2] >= '1' && src[2] <= '5')
{
if (src[3] >= '0' && src[3] <= '9'
&& ((src[3] - '0') % 2) == 0
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_DREG_G;
*reg = 10 * (src[2] - '0') + src[3] - '0';
return 4;
}
}
if (src[2] == '6')
{
if ((src[3] == '0' || src[3] == '2')
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_DREG_G;
*reg = 60 + src[3] - '0';
return 4;
}
}
if (src[2] >= '0' && src[2] <= '9'
&& ((src[2] - '0') % 2) == 0
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_DREG_G;
*reg = (src[2] - '0');
return 3;
}
}
if (l0 == 'f' && l1 == 'p')
{
if (src[2] >= '1' && src[2] <= '5')
{
if (src[3] >= '0' && src[3] <= '9'
&& ((src[3] - '0') % 2) == 0
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FPREG_G;
*reg = 10 * (src[2] - '0') + src[3] - '0';
return 4;
}
}
if (src[2] == '6')
{
if ((src[3] == '0' || src[3] == '2')
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_FPREG_G;
*reg = 60 + src[3] - '0';
return 4;
}
}
if (src[2] >= '0' && src[2] <= '9'
&& ((src[2] - '0') % 2) == 0
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_FPREG_G;
*reg = (src[2] - '0');
return 3;
}
}
if (l0 == 'm' && strncasecmp (src, "mtrx", 4) == 0)
{
if (src[4] == '0' && ! IDENT_CHAR ((unsigned char) src[5]))
{
*mode = A_FMREG_G;
*reg = 0;
return 5;
}
if (src[4] == '1' && src[5] == '6'
&& ! IDENT_CHAR ((unsigned char) src[6]))
{
*mode = A_FMREG_G;
*reg = 16;
return 6;
}
if (src[4] == '3' && src[5] == '2'
&& ! IDENT_CHAR ((unsigned char) src[6]))
{
*mode = A_FMREG_G;
*reg = 32;
return 6;
}
if (src[4] == '4' && src[5] == '8'
&& ! IDENT_CHAR ((unsigned char) src[6]))
{
*mode = A_FMREG_G;
*reg = 48;
return 6;
}
}
if (l0 == 'c' && l1 == 'r')
{
if (src[2] >= '1' && src[2] <= '5')
{
if (src[3] >= '0' && src[3] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_CREG_K;
*reg = 10 * (src[2] - '0') + src[3] - '0';
return 4;
}
}
if (src[2] == '6')
{
if (src[3] >= '0' && src[3] <= '3'
&& ! IDENT_CHAR ((unsigned char) src[4]))
{
*mode = A_CREG_K;
*reg = 60 + src[3] - '0';
return 4;
}
}
if (src[2] >= '0' && src[2] <= '9'
&& ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_CREG_K;
*reg = (src[2] - '0');
return 3;
}
}
/* We either have an error, a symbol or a control register by predefined
name. To keep things simple but still fast for normal cases, we do
linear search in the (not to big) table of predefined control
registers. We only do this when we *expect* a control register.
Those instructions should be rare enough that linear searching is ok.
Or just read them into a hash-table in shmedia_md_begin. Since they
cannot be specified in the same place of symbol operands, don't add
them there to the *main* symbol table as being in "reg_section". */
if (argtype == A_CREG_J || argtype == A_CREG_K)
{
const shmedia_creg_info *cregp;
int len = 0;
for (cregp = shmedia_creg_table; cregp->name != NULL; cregp++)
{
len = strlen (cregp->name);
if (strncasecmp (cregp->name, src, len) == 0
&& ! IDENT_CHAR (src[len]))
break;
}
if (cregp->name != NULL)
{
*mode = A_CREG_K;
*reg = cregp->cregno;
return len;
}
}
return 0;
}
/* Called from md_estimate_size_before_relax in tc-sh.c */
static int
shmedia_md_estimate_size_before_relax (fragS *fragP,
segT segment_type ATTRIBUTE_UNUSED)
{
int old_fr_fix;
expressionS *exp;
/* For ELF, we can't relax externally visible symbols; see tc-i386.c. */
bfd_boolean sym_relaxable
= (fragP->fr_symbol
&& S_GET_SEGMENT (fragP->fr_symbol) == segment_type
&& ! S_IS_EXTERNAL (fragP->fr_symbol)
&& ! S_IS_WEAK (fragP->fr_symbol));
old_fr_fix = fragP->fr_fix;
switch (fragP->fr_subtype)
{
case C (SH64PCREL16_32, UNDEF_SH64PCREL):
case C (SH64PCREL16PT_32, UNDEF_SH64PCREL):
/* Used to be to somewhere which was unknown. */
if (sym_relaxable)
{
int what = GET_WHAT (fragP->fr_subtype);
/* In this segment, so head for shortest. */
fragP->fr_subtype = C (what, SH64PCREL16);
}
else
{
int what = GET_WHAT (fragP->fr_subtype);
/* We know the abs value, but we don't know where we will be
linked, so we must make it the longest. Presumably we could
switch to a non-pcrel representation, but having absolute
values in PT operands should be rare enough not to be worth
adding that code. */
fragP->fr_subtype = C (what, SH64PCREL32);
}
fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
break;
case C (SH64PCREL16_64, UNDEF_SH64PCREL):
case C (SH64PCREL16PT_64, UNDEF_SH64PCREL):
/* Used to be to somewhere which was unknown. */
if (sym_relaxable)
{
int what = GET_WHAT (fragP->fr_subtype);
/* In this segment, so head for shortest. */
fragP->fr_subtype = C (what, SH64PCREL16);
}
else
{
int what = GET_WHAT (fragP->fr_subtype);
/* We know the abs value, but we don't know where we will be
linked, so we must make it the longest. Presumably we could
switch to a non-pcrel representation, but having absolute
values in PT operands should be rare enough not to be worth
adding that code. */
fragP->fr_subtype = C (what, SH64PCREL64);
}
fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
break;
case C (MOVI_IMM_64, UNDEF_MOVI):
case C (MOVI_IMM_32, UNDEF_MOVI):
exp = NULL;
/* Look inside the "symbol". If we find a PC-relative expression,
change this to a PC-relative, relaxable expression. */
if (fragP->fr_symbol != NULL
&& (exp = symbol_get_value_expression (fragP->fr_symbol)) != NULL
&& exp->X_op == O_subtract
&& exp->X_op_symbol != NULL
&& S_GET_SEGMENT (exp->X_op_symbol) == segment_type)
{
int what = GET_WHAT (fragP->fr_subtype);
int what_high = what == MOVI_IMM_32 ? MOVI_32 : MOVI_64;
expressionS *opexp
= symbol_get_value_expression (exp->X_op_symbol);
expressionS *addexp
= symbol_get_value_expression (exp->X_add_symbol);
/* Change the MOVI expression to the "X" in "X - Y" and subtract
Y:s offset to this location from X. Note that we can only
allow an Y which is offset from this frag. */
if (opexp != NULL
&& addexp != NULL
&& opexp->X_op == O_constant
&& fragP == symbol_get_frag (exp->X_op_symbol))
{
/* At this point, before relaxing, the add-number of opexp
is the offset from the fr_fix part. */
fragP->fr_offset
= (exp->X_add_number
- (opexp->X_add_number - (fragP->fr_fix - 4)));
fragP->fr_symbol = exp->X_add_symbol;
what = what == MOVI_IMM_32
? MOVI_IMM_32_PCREL : MOVI_IMM_64_PCREL;
/* Check the "X" symbol to estimate the size of this
PC-relative expression. */
if (S_GET_SEGMENT (exp->X_add_symbol) == segment_type
&& ! S_IS_EXTERNAL (exp->X_add_symbol)
&& ! S_IS_WEAK (exp->X_add_symbol))
fragP->fr_subtype = C (what, MOVI_16);
else
fragP->fr_subtype = C (what, what_high);
/* This is now a PC-relative expression, fit to be relaxed. */
}
else
fragP->fr_subtype = C (what, what_high);
}
else if (fragP->fr_symbol == NULL
|| (S_GET_SEGMENT (fragP->fr_symbol) == absolute_section
&& exp->X_op == O_constant))
{
unsigned long insn
= (target_big_endian
? bfd_getb32 (fragP->fr_opcode)
: bfd_getl32 (fragP->fr_opcode));
offsetT one = (offsetT) 1;
offsetT value = fragP->fr_offset
+ (fragP->fr_symbol == NULL ? 0 : S_GET_VALUE (fragP->fr_symbol));
if (value >= (-((offsetT) 1 << 15)) && value < ((offsetT) 1 << 15))
{
/* Fits in 16-bit signed number. */
int what = GET_WHAT (fragP->fr_subtype);
fragP->fr_subtype = C (what, MOVI_16);
/* Just "or" in the value. */
md_number_to_chars (fragP->fr_opcode,
insn | ((value & ((1 << 16) - 1)) << 10),
4);
}
else if (value >= -(one << 31)
&& (value < (one << 31)
|| (sh64_abi == sh64_abi_32 && value < (one << 32))))
{
/* The value fits in a 32-bit signed number. */
int reg = (insn >> 4) & 0x3f;
/* Just "or" in the high bits of the value, making the first
MOVI. */
md_number_to_chars (fragP->fr_opcode,
insn
| (((value >> 16) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the low bits. Note that this insn lives
in the variable fragment part. */
md_number_to_chars (fragP->fr_literal + old_fr_fix,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((value & ((1 << 16) - 1)) << 10),
4);
/* We took a piece of the variable part. */
fragP->fr_fix += 4;
}
else if (GET_WHAT (fragP->fr_subtype) == MOVI_IMM_32)
{
/* Value out of range. */
as_bad_where (fragP->fr_file, fragP->fr_line,
_("MOVI operand is not a 32-bit signed value: 0x%8x%08x"),
((unsigned int) (value >> 32)
& (unsigned int) 0xffffffff),
(unsigned int) value & (unsigned int) 0xffffffff);
/* Must advance size, or we will get internal inconsistency
and fall into an assert. */
fragP->fr_fix += 4;
}
/* Now we know we are allowed to expand to 48- and 64-bit values. */
else if (value >= -(one << 47) && value < (one << 47))
{
/* The value fits in a 48-bit signed number. */
int reg = (insn >> 4) & 0x3f;
/* Just "or" in the high bits of the value, making the first
MOVI. */
md_number_to_chars (fragP->fr_opcode,
insn
| (((value >> 32) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the middle bits. Note that this insn lives
in the variable fragment part. */
md_number_to_chars (fragP->fr_literal + old_fr_fix,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((value >> 16) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the low bits. */
md_number_to_chars (fragP->fr_literal + old_fr_fix + 4,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((value & ((1 << 16) - 1)) << 10),
4);
/* We took a piece of the variable part. */
fragP->fr_fix += 8;
}
else
{
/* A 64-bit number. */
int reg = (insn >> 4) & 0x3f;
/* Just "or" in the high bits of the value, making the first
MOVI. */
md_number_to_chars (fragP->fr_opcode,
insn
| (((value >> 48) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the midhigh bits. Note that this insn lives
in the variable fragment part. */
md_number_to_chars (fragP->fr_literal + old_fr_fix,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((value >> 32) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the midlow bits. */
md_number_to_chars (fragP->fr_literal + old_fr_fix + 4,
SHMEDIA_SHORI_OPC
| (reg << 4)
| (((value >> 16) & ((1 << 16) - 1)) << 10),
4);
/* Add a SHORI with the low bits. */
md_number_to_chars (fragP->fr_literal + old_fr_fix + 8,
SHMEDIA_SHORI_OPC
| (reg << 4)
| ((value & ((1 << 16) - 1)) << 10), 4);
/* We took all of the variable part. */
fragP->fr_fix += 12;
}
/* MOVI expansions that get here have not been converted to
PC-relative frags, but instead expanded by
md_number_to_chars or by calling shmedia_md_convert_frag
with final == FALSE. We must not have them around as
frags anymore; symbols would be prematurely evaluated
when relaxing. We will not need to have md_convert_frag
called again with them; any further handling is through
the already emitted fixups. */
frag_wane (fragP);
break;
}
fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
break;
/* For relaxation states that remain unchanged, report the
estimated length. */
case C (SH64PCREL16_32, SH64PCREL16):
case C (SH64PCREL16PT_32, SH64PCREL16):
case C (SH64PCREL16_32, SH64PCREL32):
case C (SH64PCREL16PT_32, SH64PCREL32):
case C (SH64PCREL16_32, SH64PCRELPLT):
case C (SH64PCREL16PT_32, SH64PCRELPLT):
case C (SH64PCREL16_64, SH64PCREL16):
case C (SH64PCREL16PT_64, SH64PCREL16):
case C (SH64PCREL16_64, SH64PCREL32):
case C (SH64PCREL16PT_64, SH64PCREL32):
case C (SH64PCREL16_64, SH64PCREL48):
case C (SH64PCREL16PT_64, SH64PCREL48):
case C (SH64PCREL16_64, SH64PCREL64):
case C (SH64PCREL16PT_64, SH64PCREL64):
case C (SH64PCREL16_64, SH64PCRELPLT):
case C (SH64PCREL16PT_64, SH64PCRELPLT):
case C (MOVI_IMM_32, MOVI_16):
case C (MOVI_IMM_32, MOVI_32):
case C (MOVI_IMM_32, MOVI_GOTOFF):
case C (MOVI_IMM_32_PCREL, MOVI_16):
case C (MOVI_IMM_32_PCREL, MOVI_32):
case C (MOVI_IMM_32_PCREL, MOVI_PLT):
case C (MOVI_IMM_32_PCREL, MOVI_GOTPC):
case C (MOVI_IMM_64, MOVI_16):
case C (MOVI_IMM_64, MOVI_32):
case C (MOVI_IMM_64, MOVI_48):
case C (MOVI_IMM_64, MOVI_64):
case C (MOVI_IMM_64, MOVI_GOTOFF):
case C (MOVI_IMM_64_PCREL, MOVI_16):
case C (MOVI_IMM_64_PCREL, MOVI_32):
case C (MOVI_IMM_64_PCREL, MOVI_48):
case C (MOVI_IMM_64_PCREL, MOVI_64):
case C (MOVI_IMM_64_PCREL, MOVI_PLT):
case C (MOVI_IMM_64_PCREL, MOVI_GOTPC):
fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
break;
default:
abort ();
}
return fragP->fr_var + (fragP->fr_fix - old_fr_fix);
}
/* Parse an expression, SH64-style. Copied from tc-sh.c, but with
datatypes adjusted. */
static char *
shmedia_parse_exp (char *s, shmedia_operand_info *op)
{
char *save;
char *new_pointer;
save = input_line_pointer;
input_line_pointer = s;
expression (&op->immediate);
if (op->immediate.X_op == O_absent)
as_bad (_("missing operand"));
new_pointer = input_line_pointer;
input_line_pointer = save;
return new_pointer;
}
/* Parse an operand. Store pointer to next character in *PTR. */
static void
shmedia_get_operand (char **ptr, shmedia_operand_info *op,
shmedia_arg_type argtype)
{
char *src = *ptr;
shmedia_arg_type mode = (shmedia_arg_type) -1;
unsigned int len;
len = shmedia_parse_reg (src, &mode, &(op->reg), argtype);
if (len)
{
*ptr = src + len;
op->type = mode;
}
else
{
/* Not a reg, so it must be a displacement. */
*ptr = shmedia_parse_exp (src, op);
op->type = A_IMMM;
/* This is just an initialization; shmedia_get_operands will change
as needed. */
op->reloctype = BFD_RELOC_NONE;
}
}
/* Parse the operands for this insn; return NULL if invalid, else return
how much text was consumed. */
static char *
shmedia_get_operands (shmedia_opcode_info *info, char *args,
shmedia_operands_info *operands)
{
char *ptr = args;
int i;
if (*ptr == ' ')
ptr++;
for (i = 0; info->arg[i] != 0; i++)
{
memset (operands->operands + i, 0, sizeof (operands->operands[0]));
/* No operand to get for these fields. */
if (info->arg[i] == A_REUSE_PREV)
continue;
shmedia_get_operand (&ptr, &operands->operands[i], info->arg[i]);
/* Check operands type match. */
switch (info->arg[i])
{
case A_GREG_M:
case A_GREG_N:
case A_GREG_D:
if (operands->operands[i].type != A_GREG_M)
return NULL;
break;
case A_FREG_G:
case A_FREG_H:
case A_FREG_F:
if (operands->operands[i].type != A_FREG_G)
return NULL;
break;
case A_FVREG_G:
case A_FVREG_H:
case A_FVREG_F:
if (operands->operands[i].type != A_FVREG_G)
return NULL;
break;
case A_FMREG_G:
case A_FMREG_H:
case A_FMREG_F:
if (operands->operands[i].type != A_FMREG_G)
return NULL;
break;
case A_FPREG_G:
case A_FPREG_H:
case A_FPREG_F:
if (operands->operands[i].type != A_FPREG_G)
return NULL;
break;
case A_DREG_G:
case A_DREG_H:
case A_DREG_F:
if (operands->operands[i].type != A_DREG_G)
return NULL;
break;
case A_TREG_A:
case A_TREG_B:
if (operands->operands[i].type != A_TREG_B)
return NULL;
break;
case A_CREG_J:
case A_CREG_K:
if (operands->operands[i].type != A_CREG_K)
return NULL;
break;
case A_IMMS16:
case A_IMMU16:
/* Check for an expression that looks like S & 65535 or
(S >> N) & 65535, where N = 0, 16, 32, 48.
Get the S and put at operands->operands[i].immediate, and
adjust operands->operands[i].reloctype. */
{
expressionS *imm_expr = &operands->operands[i].immediate;
expressionS *right_expr;
if (operands->operands[i].type == A_IMMM
&& imm_expr->X_op == O_bit_and
&& imm_expr->X_op_symbol != NULL
&& ((right_expr
= symbol_get_value_expression (imm_expr->X_op_symbol))
->X_op == O_constant)
&& right_expr->X_add_number == 0xffff)
{
symbolS *inner = imm_expr->X_add_symbol;
bfd_reloc_code_real_type reloctype = BFD_RELOC_SH_IMM_LOW16;
expressionS *inner_expr
= symbol_get_value_expression (inner);
if (inner_expr->X_op == O_right_shift)
{
expressionS *inner_right;
if (inner_expr->X_op_symbol != NULL
&& ((inner_right
= symbol_get_value_expression (inner_expr
->X_op_symbol))
->X_op == O_constant))
{
offsetT addnum
= inner_right->X_add_number;
if (addnum == 0 || addnum == 16 || addnum == 32
|| addnum == 48)
{
reloctype
= (addnum == 0
? BFD_RELOC_SH_IMM_LOW16
: (addnum == 16
? BFD_RELOC_SH_IMM_MEDLOW16
: (addnum == 32
? BFD_RELOC_SH_IMM_MEDHI16
: BFD_RELOC_SH_IMM_HI16)));
inner = inner_expr->X_add_symbol;
inner_expr = symbol_get_value_expression (inner);
}
}
}
/* I'm not sure I understand the logic, but evidently the
inner expression of a lone symbol is O_constant, with
the actual symbol in expr_section. For a constant, the
section would be absolute_section. For sym+offset,
it's O_symbol as always. See expr.c:make_expr_symbol,
first statements. */
if (inner_expr->X_op == O_constant
&& S_GET_SEGMENT (inner) != absolute_section)
{
operands->operands[i].immediate.X_op = O_symbol;
operands->operands[i].immediate.X_add_symbol = inner;
operands->operands[i].immediate.X_add_number = 0;
}
else
operands->operands[i].immediate
= *symbol_get_value_expression (inner);
operands->operands[i].reloctype = reloctype;
}
}
/* Fall through. */
case A_IMMS6:
case A_IMMS6BY32:
case A_IMMS10:
case A_IMMS10BY1:
case A_IMMS10BY2:
case A_IMMS10BY4:
case A_IMMS10BY8:
case A_PCIMMS16BY4:
case A_PCIMMS16BY4_PT:
case A_IMMU5:
case A_IMMU6:
if (operands->operands[i].type != A_IMMM)
return NULL;
if (sh_check_fixup (&operands->operands[i].immediate,
&operands->operands[i].reloctype))
{
as_bad (_("invalid PIC reference"));
return NULL;
}
break;
default:
BAD_CASE (info->arg[i]);
}
if (*ptr == ',' && info->arg[i + 1])
ptr++;
}
return ptr;
}
/* Find an opcode at the start of *STR_P in the hash table, and set
*STR_P to the first character after the last one read. */
static shmedia_opcode_info *
shmedia_find_cooked_opcode (char **str_p)
{
char *str = *str_p;
char *op_start;
char *op_end;
char name[20];
unsigned int nlen = 0;
/* Drop leading whitespace. */
while (*str == ' ')
str++;
/* Find the op code end. */
for (op_start = op_end = str;
*op_end
&& nlen < sizeof (name) - 1
&& ! is_end_of_line[(unsigned char) *op_end]
&& ! ISSPACE ((unsigned char) *op_end);
op_end++)
{
unsigned char c = op_start[nlen];
/* The machine independent code will convert CMP/EQ into cmp/EQ
because it thinks the '/' is the end of the symbol. Moreover,
all but the first sub-insn is a parallel processing insn won't
be capitalized. Instead of hacking up the machine independent
code, we just deal with it here. */
c = TOLOWER (c);
name[nlen] = c;
nlen++;
}
name[nlen] = 0;
*str_p = op_end;
if (nlen == 0)
as_bad (_("can't find opcode"));
return
(shmedia_opcode_info *) hash_find (shmedia_opcode_hash_control, name);
}
/* Build up an instruction, including allocating the frag. */
static int
shmedia_build_Mytes (shmedia_opcode_info *opcode,
shmedia_operands_info *operands)
{
unsigned long insn = opcode->opcode_base;
int i, j;
char *insn_loc = frag_more (4);
/* The parameter to dwarf2_emit_insn is actually the offset to the start
of the insn from the fix piece of instruction that was emitted.
Since we want .debug_line addresses to record (address | 1) for
SHmedia insns, we get the wanted effect by taking one off the size,
knowing it's a multiple of 4. We count from the first fix piece of
the insn. There must be no frags changes (frag_more or frag_var)
calls in-between the frag_more call we account for, and this
dwarf2_emit_insn call. */
dwarf2_emit_insn (3);
/* This is stored into any frag_var operand. */
sh64_last_insn_frag = frag_now;
/* Loop over opcode info, emit an instruction. */
for (i = 0, j = 0; opcode->arg[i]; i++)
{
shmedia_arg_type argtype = opcode->arg[i];
shmedia_operand_info *opjp = &operands->operands[j];
switch (argtype)
{
case A_TREG_A:
case A_TREG_B:
case A_GREG_M:
case A_GREG_N:
case A_GREG_D:
case A_FREG_G:
case A_FREG_H:
case A_FREG_F:
case A_FVREG_G:
case A_FVREG_H:
case A_FVREG_F:
case A_FMREG_G:
case A_FMREG_H:
case A_FMREG_F:
case A_FPREG_G:
case A_FPREG_H:
case A_FPREG_F:
case A_DREG_G:
case A_DREG_H:
case A_DREG_F:
case A_CREG_J:
case A_CREG_K:
/* Six-bit register fields. They just get filled with the
parsed register number. */
insn |= (opjp->reg << opcode->nibbles[i]);
j++;
break;
case A_REUSE_PREV:
/* Copy the register for the previous operand to this position. */
insn |= (operands->operands[j - 1].reg << opcode->nibbles[i]);
j++;
break;
case A_IMMS6:
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS6);
j++;
break;
case A_IMMS6BY32:
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS6BY32);
j++;
break;
case A_IMMS10BY1:
case A_IMMS10:
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS10);
j++;
break;
case A_IMMS10BY2:
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS10BY2);
j++;
break;
case A_IMMS10BY4:
if (opjp->reloctype == BFD_RELOC_NONE)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS10BY4);
else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_GOTPLT10BY4);
else if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_GOT10BY4);
else
as_bad (_("invalid PIC reference"));
j++;
break;
case A_IMMS10BY8:
if (opjp->reloctype == BFD_RELOC_NONE)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_IMMS10BY8);
else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_GOTPLT10BY8);
else if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL)
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
BFD_RELOC_SH_GOT10BY8);
else
as_bad (_("invalid PIC reference"));
j++;
break;
case A_IMMS16:
/* Sneak a peek if this is the MOVI insn. If so, check if we
should expand it. */
if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL)
opjp->reloctype = BFD_RELOC_SH_GOT_LOW16;
else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32)
opjp->reloctype = BFD_RELOC_SH_GOTPLT_LOW16;
if ((opjp->reloctype == BFD_RELOC_NONE
|| opjp->reloctype == BFD_RELOC_32_GOTOFF
|| opjp->reloctype == BFD_RELOC_32_PLT_PCREL
|| opjp->reloctype == BFD_RELOC_SH_GOTPC)
&& opcode->opcode_base == SHMEDIA_MOVI_OPC
&& (opjp->immediate.X_op != O_constant
|| opjp->immediate.X_add_number < -32768
|| opjp->immediate.X_add_number > 32767)
&& (sh64_expand
|| opjp->reloctype == BFD_RELOC_32_GOTOFF
|| opjp->reloctype == BFD_RELOC_32_PLT_PCREL
|| opjp->reloctype == BFD_RELOC_SH_GOTPC))
{
int what = sh64_abi == sh64_abi_64 ? MOVI_IMM_64 : MOVI_IMM_32;
offsetT max = sh64_abi == sh64_abi_64 ? MOVI_64 : MOVI_32;
offsetT min = MOVI_16;
offsetT init = UNDEF_MOVI;
valueT addvalue
= opjp->immediate.X_op_symbol != NULL
? 0 : opjp->immediate.X_add_number;
symbolS *sym
= opjp->immediate.X_op_symbol != NULL
? make_expr_symbol (&opjp->immediate)
: opjp->immediate.X_add_symbol;
if (opjp->reloctype == BFD_RELOC_32_GOTOFF)
init = max = min = MOVI_GOTOFF;
else if (opjp->reloctype == BFD_RELOC_32_PLT_PCREL)
{
init = max = min = MOVI_PLT;
what = (sh64_abi == sh64_abi_64
? MOVI_IMM_64_PCREL
: MOVI_IMM_32_PCREL);
}
else if (opjp->reloctype == BFD_RELOC_SH_GOTPC)
{
init = max = min = MOVI_GOTPC;
what = (sh64_abi == sh64_abi_64
? MOVI_IMM_64_PCREL
: MOVI_IMM_32_PCREL);
}
frag_var (rs_machine_dependent,
md_relax_table[C (what, max)].rlx_length,
md_relax_table[C (what, min)].rlx_length,
C (what, init), sym, addvalue, insn_loc);
}
else
insn |= shmedia_immediate_op (insn_loc, opjp, 0,
(opjp->reloctype
== BFD_RELOC_NONE)
? BFD_RELOC_SH_IMMS16
: opjp->reloctype);
j++;
break;
case A_PCIMMS16BY4:
{
int what
= ((sh64_abi == sh64_abi_64 && ! sh64_pt32)
? SH64PCREL16_64 : SH64PCREL16_32);
offsetT max
= ((sh64_abi == sh64_abi_64 && ! sh64_pt32)
? SH64PCREL64 : SH64PCREL32);
offsetT min = SH64PCREL16;
offsetT init = UNDEF_SH64PCREL;
/* Don't allow complex expressions here. */
if (opjp->immediate.X_op_symbol != NULL)
{
as_bad (_("invalid operand: expression in PT target"));
return 0;
}
if (opjp->reloctype == BFD_RELOC_32_PLT_PCREL)
init = max = min = SH64PCRELPLT;
/* If we're not expanding, then just emit a fixup. */
if (sh64_expand || opjp->reloctype != BFD_RELOC_NONE)
frag_var (rs_machine_dependent,
md_relax_table[C (what, max