blob: 4d248ab6fed44c15e7e1fe3c26dab47b5e10d7d7 [file] [log] [blame]
2006-12-31 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (lin_lwp_attach_lwp): Return a status. Do not
add the LWP to our list until we are attached. Warn instead
of erroring if the attach fails.
* linux-nat.h (lin_lwp_attach_lwp): New prototype.
* linux-thread-db.c (attach_thread): Call lin_lwp_attach_lwp
directly. Do not add the thread to our list until we are
successfully attached.
* config/nm-linux.h (lin_lwp_attach_lwp, ATTACH_LWP): Delete.
2006-12-31 Daniel Jacobowitz <dan@codesourcery.com>
* configure.ac: Add tests for TD_VERSION and TD_NOTLS.
* linux-thread-db.c (thread_db_err_str): Recognize TD_NOTALLOC,
TD_VERSION, and TD_NOTLS.
* configure, config.in: Regenerated.
2006-12-31 Joel Brobecker <brobecker@adacore.com>
* i386-tdep.c (i386_analyze_stack_align): Add handling of two
other possible code sequences that perform a stack realignment.
2006-12-31 Mark Kettenis <kettenis@gnu.org>
* sparc64-tdep.h (SPARC64_PSTATE_AG, SPARC64_PSTATE_IE)
(SPARC64_PSTATE_PRIV, SPARC64_PSTATE_AM, SPARC64_PSTATE_PEF)
(SPARC64_PSTATE_RED, SPARC64_PSTATE_TLE, SPARC64_PSTATE_CLE)
(SPARC64_PSTATE_PID0, SPARC64_PSTATE_PID1): New defines.
* sparc64nbsd-nat.c: Include "gdbcore.h".
(sparc64nbsd_supply_pcb): Get %pc from stack if necessary. Supply
processor state register.
* sparc64obsd-tdep.c (sparc64obsd_trapframe_cache)
(sparc64obsd_trapframe_this_id)
(sparc64obsd_trapframe_prev_register)
(sparc64obsd_trapframe_sniffer): New functions.
(sparc64obsd_trapframe_unwind): New variable.
(sparc64obsd_init_abi): Append trapframe unwinder.
* Makefile.in (sparc64nbsd-nat.o): Update dependencies.
2006-12-30 Daniel Jacobowitz <dan@codesourcery.com>
* infrun.c (handle_inferior_event): Don't call
ENSURE_VFORKING_PARENT_REMAINS_STOPPED.
* target.h (ENSURE_VFORKING_PARENT_REMAINS_STOPPED): Delete.
(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): Delete.
2006-12-29 Mark Kettenis <kettenis@gnu.org>
* sparc-tdep.c (sparc_psr_type, sparc_fsr_type): New variables.
(sparc_init_types): New function.
(sparc32_register_type): Use appropriate flag types for %fsr and
%prs.
(_initialize_sparc_tdep): Call sparc_init_types.
* memory-map.c (memory_map_end_element): Move variable
declarations to the begining of the block.
2006-12-28 Daniel Jacobowitz <dan@codesourcery.com>
* ia64-tdep.c (get_kernel_table): Correct signedness in check
for a negative return value.
2006-12-27 Gary Funck <gary@intrepid.com>
* dwarf2read.c (dwarf_attr_name, dwarf_cfi_name)
(dwarf_stack_op_name, dwarf_tag_name)
(dwarf_type_encoding_name): Decode additional DWARF 2
and DWARF 3 codes into their corresponding string names.
* MAINTAINERS (Write After Approval): Add myself.
2006-12-26 Joel Brobecker <brobecker@adacore.com>
* sparc64-tdep.c (sparc64_extract_return_value): Add handling
for array types.
(sparc64_store_return_value): Likewise.
2006-12-18 Daniel Jacobowitz <dan@codesourcery.com>
* breakpoint.c (watchpoint_check): Double-check the found frame.
2006-12-17 Nick Hudson <skrll@netbsd.org>
Mark Kettenis <kettenis@gnu.org>
* i386nbsd-nat.c: Include "nbsd-nat.h".
(_initialize_i386nbsd_nat): Update target vector to use
nbsd_pid_to_exec_file.
* config/i386/nbsdelf.mh (NATDEPFILES): Add nbsd-nat.o.
* config/i386/nbsdaout.mh (NATDEPFILES): Add nbsd-nat.o.
* nbsd-nat.c: New file.
* nbsd-nat.h: New file.
* Makefile.in (ALLDEPFILES): Add nbsd-nat.c.
(nbsd_nat_h): New variable.
(nbsd-nat.o): New dependency.
2006-12-16 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (ALLDEPFILES): Remove mipsv4-nat.c.
(mipsv4-nat.o): Delete.
* mipsv4-nat.c: Delete.
2006-12-16 Daniel Jacobowitz <dan@codesourcery.com>
* dve3900-rom.c: Delete file.
* Makefile.in (dve3900-rom.o): Delete.
2006-12-16 Daniel Jacobowitz <dan@codesourcery.com>
* vx-share/README: Delete file.
2006-12-16 Mark Kettenis <kettenis@gnu.org>
* i386obsd-nat.c: Include "gdbcore.h", "regcache.h", "target.h",
<machine/frame.h>, <machine/pcb.h>, "i386bsd-nat.h" and
"bsd-kvm.h".
(i386obsd_supply_pcb): New function.
(_initialize_i386obsd_nat): Construct and add target
vector. Enable libkvm interface.
* Makefile.in (i386obsd-nat.o): Update dependencies.
* config/i386/obsd.mh (NATDEPFILES): Remove i386nbsd-nat.c
* sparcobsd-tdep.c: Fix typo.
Add OpenBSD/sh native support.
* NEWS (New native configurations): Mention OpenBSD/sh.
* configure.host: Add sh*-*-openbsd*.
* shnbsd-nat.c: Include "inf-ptrace.h".
(shnbsd_fetch_inferior_registers): Rename from
fetch_inferior_registers. Make static.
(shnbsd_store_inferior_registers): Rename from
store_inferior_registers. Make static.
(_initialize_shnbsd_nat): New function.
* Makefile.in (shnbsd-nat.o): Update dependencies.
* config/sh/nbsd.mh (NAT_CLIBS, NAT_FILE): Remove.
(NATDEPFILES): Remove infptrace.o and inftarg.o. Add
inf-ptrace.o.
Add OpenBSD/sh support.
* NEWS (New targets): Mention OpenBSD/sh.
* configure.tgt: Add sh*-*-openbsd*.
* shnbsd-tdep.c (_initialize_shnbsd_tdep): Register handler for
GDB_OSABI_OPENBSD_ELF.
* config/sh/obsd.mt: New file.
* ppcnbsd-tdep.c: Fix typo in comment.
2006-12-15 Mark Kettenis <kettenis@gnu.org>
* remote-fileio.c (remote_fileio_mode_to_target): Use
S_ISREG/S_ISDIR/S_ISCHR macros instead of S_IFREG/S_IFDIR/S_IFCHR.
2006-12-15 Daniel Jacobowitz <dan@codesourcery.com>
* breakpoint.c (insert_bp_location): Add newline to note.
2006-12-15 Alan Modra <amodra@bigpond.net.au>
* spu-linux-nat.c (spu_bfd_iovec_stat): New function.
(spu_bfd_open): Adjust bfd_openr_iovec call.
2006-12-13 Jim Blandy <jimb@codesourcery.com>
* value.c (value_copy): Copy the full 'location' contents, instead
of assuming that copying ADDRESS will bring over everything in the
union.
2006-12-13 Markus Deuling <deuling@de.ibm.com>
* spu-tdep.c (spu_init_vector_type): New function.
(spu_builtin_type_vec128.): New static variable.
(spu_register_type): Return spu_builtin_type_vec128 as default.
(_initialize_spu_tdep): Call spu_init_vector_type.
2006-12-09 Corinna Vinschen <vinschen@redhat.com>
* win32-nat.c (env_sort): Remove.
(win32_create_inferior): Remove code which creates a Windows
environment. Use Cygwin function call instead. Propagate
current environment to inferior process.
2006-12-09 Nick Roberts <nickrob@snap.net.nz>
* varobj.c (varobj_update): Ensure frame is restored when
variable object is out of scope.
2006-12-08 Eli Zaretskii <eliz@gnu.org>
* MAINTAINERS: Clarify the meaning of an ``obvious fix'' in the
docs.
2006-12-08 Vladimir Prus <vladimir@codesourcery.com>
* varobj.c (varobj_create): Don't call release_value.
(varobj_set_value): Likewise.
(install_new_value): Call coerce_ref and release_value
on the value. Add asserts.
2006-12-08 Nick Roberts <nickrob@snap.net.nz>
* mi/mi-cmd-var.c (mi_cmd_var_update): Fix memory leak.
2006-12-06 Jim Blandy <jimb@codesourcery.com>
* gdbtypes.c: Revert 2006-12-05 change, and explain why.
2006-12-06 Andrew Stubbs <andrew.stubbs@st.com>
* event-top.c (command_handler): On EOF, print 'quit' and run quit
command via execute_command such that hooks and trace work.
* utils.c (defaulted_query): On EOF, print default answer and newline.
2006-12-06 Vladimir Prus <vladimir@codesourcery.com>
* varobj.c (cplus_value_of_child): When accessing
base suboject, don't specially process references.
2006-12-05 Adam Nemet <anemet@caviumnetworks.com>
* MAINTAINERS (Write After Approval): Add myself.
2006-12-05 Jim Blandy <jimb@codesourcery.com>
* gdbtypes.c (built_gdbtypes): Don't set builtin_type_void here.
(_initialize_gdbtypes): Do it here, and don't swap it when the
architecture changes.
2006-12-05 Daniel Jacobowitz <dan@codesourcery.com>
* cp-valprint.c, p-valprint.c: Revert last change.
2006-12-05 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention MIPS remote autodetection, mips64 gdbserver,
"set mem inaccessible-by-default", and "set breakpoint auto-hw".
2006-12-05 H.J. Lu <hongjiu.lu@intel.com>
* cp-valprint.c (cp_print_value_fields): Initialize tmp_obstack.
(cp_print_value): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
(pascal_object_print_value): Likewise.
2006-12-05 Adam Nemet <anemet@caviumnetworks.com>
* target.c (debug_to_remove_watchpoint): Call
to_remove_watchpoint. Print target_remove_watchpoint.
2006-12-01 Daniel Jacobowitz <dan@codesourcery.com>
* elfread.c (elf_symtab_read): Treat weak functions as global.
2006-11-30 Jim Blandy <jimb@codesourcery.com>
* ada-lang.c (value_subscript_packed): Don't bother to set the
lvalue type of the returned value here;
ada_value_primitive_packed_val takes care of that.
2006-11-30 Nick Roberts <nickrob@snap.net.nz>
* mi/mi-cmd-var.c (mi_cmd_var_list_children): Remove unused
variable.
2006-07-29 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-cmd-var.c (print_varobj): New function.
(mi_cmd_var_create): Use the above.
(mi_cmd_var_list_children): Likewise.
2006-07-29 Vladimir Prus <vladimir@codesourcery.com>
* MAINTAINERS (Write After Approval): Add myself.
2006-11-29 Andrew Stubbs <andrew.stubbs@st.com>
* solib.c (solib_open): Treat bare file names as relative paths.
2006-11-29 Vladimir Prus <vladimir@codesourcery.com>
* varobj.c (varobj_set_value): Don't compare the old
and the new value here. Don't assign new value here.
Instead, call install_new_value.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* regformats/reg-mips64.dat: New file.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (mips-tdep.o, target-descriptions.o): Update.
* target-descriptions.c (struct property): New.
(struct target_desc): Add properties member.
(tdesc_property, set_tdesc_property): New.
* target-descriptions.h (tdesc_property, set_tdesc_property):
Declare.
* mips-tdep.c (PROPERTY_GP32, PROPERTY_GP64): New constants.
(struct gdbarch_tdep): Add register_size_valid_p and register_size.
(mips_isa_regsize): Use them.
(mips_register_g_packet_guesses): New.
(mips_gdbarch_init): Call it. If a target description is supplied,
check for internal properties. Check for register size mismatches.
* remote.c (send_g_packet, process_g_packet): New functions, split
out from fetch_registers_using_g.
(fetch_registers_using_g): Use them.
(struct remote_g_packet_guess, remote_g_packet_guess_s)
(struct remote_g_packet_data, remote_g_packet_data_handle)
(remote_g_packet_data_init, register_remote_g_packet_guess)
(remote_read_description): New.
(init_remote_ops, init_remote_async_ops): Set to_read_description.
(_initialize_remote): Register remote_g_packet_data_handle.
* remote.h (register_remote_g_packet_guess): Declare.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (SFILES): Add new and missed files.
(target_descriptions_h): New.
(COMMON_OBS): Add target-descriptions.o.
(arch-utils.o, infcmd.o, remote.o, target.o): Update.
(target-descriptions.o): New.
* arch-utils.c (gdbarch_info_fill): Check for a target
description.
* target-descriptions.c, target-descriptions.h: New files.
* gdbarch.sh: Add target_desc to info. Declare it in gdbarch.h.
Correct typos.
(gdbarch_list_lookup_by_info): Check target_desc.
* gdbarch.c, gdbarch.h: Regenerated.
* target.c (update_current_target): Mention to_read_description.
(target_pre_inferior): Call target_clear_description.
(target_read_description): New.
* target.h (struct target_ops): Add to_read_description.
(target_read_description): New prototype.
* infcmd.c (post_create_inferior): Call target_find_description.
* remote.c (remote_open_1): Likewise.
(extended_remote_create_inferior): Add a comment.
(extended_remote_async_create_inferior): Likewise.
2006-11-29 Nick Roberts <nickrob@snap.net.nz>
* linux-thread-db.c: Include <signal.h>.
2006-11-28 Ulrich Weigand <uweigand@de.ibm.com>
* config/tm-linux.h: Delete file.
* config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Set to tm-alpha.h.
* config/alpha/tm-alphalinux.h: Delete file.
* config/arm/linux.mt (DEPRECATED_TM_FILE): Set to tm-arm.h
* config/arm/tm-linux.h: Delete file.
* config/i386/tm-linux.h: Do not include "config/tm-linux.h".
* config/ia64/tm-linux.h: Do not include "config/tm-linux.h".
* config/m32r/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/mips/tm-linux.h: Do not include "config/tm-linux.h".
* config/pa/linux.mt (DEPRECATED_TM_FILE): Set to tm-hppa.h.
* config/pa/tm-linux.h: Delete file.
* config/powerpc/tm-linux.h: Do not include "config/tm-linux.h".
* config/s390/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/sh/linux.mt (DEPRECATED_TM_FILE): Set to tm-sh.h.
* config/sh/tm-linux.h: Delete file.
* alpha-linux-tdep.c: Include "symtab.h".
(alpha_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* i386-linux-tdep.c: Include "symtab.h".
(i386_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* ia64-linux-tdep.c: Include "symtab.h".
(ia64_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* m32r-linux-tdep.c: Include "symtab.h".
(m32r_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* mips-linux-tdep.c: Include "symtab.h".
(mips_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* sh-linux-tdep.c: Include "symtab.h".
(sh_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* s390-tdep.c (s390_gdbarch_init): Call
set_gdbarch_skip_trampoline_code.
* s390-nat.c: Do not include "tm.h".
* Makefile.in (alpha-linux-tdep.o): Add dependency on $(symtab_h).
(i386-linux-tdep.o): Likewise.
(ia64-linux-tdep.o): Likewise.
(m32r-linux-tdep.o): Likewise.
(mips-linux-tdep.o): Likewise.
(sh-linux-tdep.o): Likewise.
(s390-nat.o): Remove dependency on $(tm_h).
2006-11-28 Ulrich Weigand <uweigand@de.ibm.com>
* config/nm-linux.h: Do not include <signal.h>.
(REALTIME_LO, REALTIME_HI): Do not define.
* signals/signals.c (REALTIME_HI): Fix off-by-one bug.
2006-11-28 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-cmd-var.c (mi_cmd_var_create): Fix cleanup
handlers. Free expression.
2006-11-28 Ulrich Weigand <uweigand@de.ibm.com>
* config/tm-linux.h (REALTIME_LO, REALTIME_HI): Do not define.
* config/mips/tm-linux.h (REALTIME_LO, REALTIME_HI): Likewise.
* config/rs6000/tm-rs6000ly.h (REALTIME_LO, REALTIME_HI): Move to ...
* config/nm-lynx.h (REALTIME_LO, REALTIME_HI): ... here.
* config/i386/nto.mh (NAT_FILE): Define.
* config/i386/nto.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/tm-nto.h: Delete file.
* config/tm-nto.h: Delete file.
* config/nm-nto.h: New file.
* Makefile.in (nto-tdep.o): Add dependency on $(objfiles_h).
* nto-tdep.c: Include "objfiles.h" and <string.h>.
* coff-solib.h (SOLIB_UNLOADED_LIBRARY_PATHNAME): Define as "".
* xcoffread.c (read_xcoff_symtab): Initialize fcn_stab_saved.
* config/rs6000/rs6000lynx.mt (TDEPFILES): Add xcoffread.o.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2-frame.c (decode_frame_entry_1): Skip unknown augmentations
without skipping the CIE.
2006-11-28 Vladimir Prus <vladimir@codesourcery.com>
Fetch varobj values from memory in a single place,
and only fetch the values that are really needed.
* varobj.c (struct varobj): Clarify comment.
(my_value_equal): Remove.
(install_new_value): New function.
(type_of_child): Remove.
(varobj_create): Use install_new_value.
(varobj_set_value): Use value_contents_equal, not
my_value_equal.
(varobj_update): Use install_new_value.
(create_child): Likewise. Inline type_of_child here.
(value_of_child): Don't fetch the value.
(c_value_of_root): Likewise.
(c_value_of_variable): Likewise.
(type_changeable): Improve comments.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (struct remote_arch_state): Doc fix.
(compare_pnums): New function.
(init_remote_state): Only allocate packet_reg structures for raw
registers. Define the g/G packet format separately from creating
packet_reg. Don't use DEPRECATED_REGISTER_BYTE.
(packet_reg_from_regnum, packet_reg_from_pnum): Only iterate over
raw registers.
(register_bytes_found): Delete.
(fetch_register_using_p): Take a struct packet_reg. Handle disabled
'p' packet here. Use packet_ok.
(fetch_registers_using_g): New function, split out of
remote_fetch_registers. Check the 'g' packet more strictly. Save
its actual size and contents. Eliminate BUF. Only iterate over
raw registers.
(remote_fetch_registers): Use the new functions for 'p' and 'g'.
Mark unavailable registers.
(store_register_using_P): Likewise to fetch_register_using_p.
(store_registers_using_G): New function, split out of
remote_store_registers. Only iterate over raw registers. Don't
use register_bytes_found.
(remote_store_registers): Likewise to remote_fetch_registers.
2006-11-28 Pedro Alves <pedro_alves@portugalmail.pt>
* coffread.c (cs_to_bfd_section): New function.
(cs_to_section): Use cs_to_bfd_section.
(record_minimal_symbol): Take the coff_symbol* parameter instead
of the symbol's name as a char*.
Add 'int section' parameter. Call prim_record_minimal_symbol_and_info
instead of prim_record_minimal_symbol_and_info.
Change return type to struct minimal_symbol *.
(coff_symtab_read): Adapt to new record_minimal_symbol's signature.
Make all minimal symbol creations go through record_minimal_symbol.
2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
* symtab.c (find_pc_sect_line): Do not return a line before
the start of a symtab.
2006-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: SPU target is already supported in GDB 6.6.
2006-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (mips-linux-tdep.o) Add $(solib_h) dependency.
(nto-procfs.o): Likewise.
* mips-linux-tdep.c: Include "solib.h".
* nto-procfs.c: Likewise.
* config/nm-linux.h: Do not include "solib.h".
* config/nm-nbsd.h: Likewise.
* config/tm-linux.h: Likewise.
* config/alpha/nm-osf.h: Likewise.
* config/frv/tm-frv.h: Likewise.
* config/i386/nm-fbsh.h: Likewise.
* config/i386/nm-i386gnu.h: Likewise.
* config/i386/nm-i386sco5.h: Likewise.
* config/i386/nm-i386sol2.h: Likewise.
* config/i386/nm-i386v4.h: Likewise.
* config/i386/nm-i386v42mp.h: Likewise.
* config/i386/tm-i386sol2.h: Likewise.
* config/i386/tm-nto.h: Likewise.
* config/mips/nm-irix5.h: Likewise.
* config/mips/tm-nbsd.h: Likewise.
* config/pa/tm-hppah.h: Likewise.
* config/powerpc/tm-ppc-eabi.h: Likewise.
* config/rs6000/tm-rs6000.h: Likewise.
* config/sh/tm-nbsd.h: Likewise.
* config/sparc/nm-sol2.h: Likewise.
* config/sparc/tm-sol2.h: Likewise.
* config/arm/nbsdaout.mh: Remove NAT_FILE.
* config/i386/nbsdaout.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/obsdaout.mh: Likewise.
* config/m68k/nbsdaout.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/sparc/nbsdaout.mh: Likewise.
* config/cris/cris.mt: Remove DEPRECATED_TM_FILE.
* config/i386/linux64.mt: Likewise.
* config/m68k/linux.mt: Likewise.
* config/m68k/nbsd.mt: Likewise.
* config/sparc/linux.mt: Likewise.
* config/sparc/linux64.mt: Likewise.
* config/vax/nbsd.mt: Likewise.
2006-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: New port to Cell Broadband Engine SPU.
* MAINTAINERS: Add myself as spu maintainer.
2006-11-22 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (arm-tdep.o): Update dependencies.
* arm-tdep.c (thumb_skip_prologue): Remove.
(thumb_analyze_prologue): New function.
(arm_skip_prologue): Use thumb_analyze_prologue.
(thumb_scan_prologue): Ditto.
2006-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* configure.tgt: Enable gdbserver for SPU target.
* configure.ac: Build gdbserver when gdb_native is yes.
* configure: Regenerate.
* regformats/reg-spu.dat: New file.
2006-11-22 Daniel Jacobowitz <dan@codesourcery.com>
* osabi.c (gdbarch_lookup_osabi): Do not return
GDB_OSABI_UNINITIALIZED.
2006-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* config/powerpc/spu-linux.mh: New file.
* config/spu/spu.mt: New file.
* configure.ac: Provide gdb_native configuration variable.
* configure: Regenerate.
* configure.host: Support powerpc64 to spu 'pseudo-native' mode.
* configure.tgt: Add "spu" target_cpu and "spu*-*-*" target.
* Makefile.in (spu_tdep_h): New variable.
(ALLDEPFILES): Add spu-linux-nat.c and spu-tdep.c
(spu-linux-nat.o, spu-tdep.o): Add dependencies.
* spu-linux-nat.c: New file.
* spu-tdep.c: New file.
* spu-tdep.h: New file.
2006-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* findvar.c (address_from_register): New function.
* value.h (address_from_register): Add prototype.
* dwarf2loc.c (dwarf_expr_read_reg): Use address_from_register.
2006-11-22 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c: Include "memattr.h".
(automatic_hardware_breakpoints): New.
(show_automatic_hardware_breakpoints): New.
(insert_bp_location): Automatically use
hardware breakpoints.
(_initialize_breakpoint): Register the "auto-hw"
variable.
* Makefile.in (breakpoint.o): Update dependencies.
2006-11-21 Vladimir Prus <vladimir@codesourcery.com>
* memattr.h (enum mem_access_mode): New value
MEM_NONE.
* memattr.c (unknown_mem_attrib): New.
(inaccessible_by_default): New.
(show_inaccessible_by_default): New.
(lookup_mem_region): Check inaccessible_by_default.
(dummy_cmd): New.
(mem_set_cmdlist, mem_show_cmdlist): New.
(_initialize_mem): Register new "set" and "show"
commands.
* target.c (memory_xfer_partial): If memory type
is MEM_NONE, return an error.
Clip to region size when calling to_xfer_partial.
If upper limit of memory range is 0, don't clip
anything.
2006-11-20 Joel Brobecker <brobecker@adacore.com>
* README: Remove obsolete information.
2006-11-20 Andrew Cagney <cagney@redhat.com>
* linux-nat.h: Refer to GNU/Linux or Linux kernel.
* linux-nat.c (lin_lwp_attach_lwp, linux_nat_thread_alive): Ditto.
* infcmd.c (attach_command): Ditto.
* hppa-linux-tdep.c (hppa_linux_regset): Ditto.
* mn10300-linux-tdep.c: Ditto. Update copyright year.
* frv-linux-tdep.c: Ditto. Update copyright year.
2006-11-19 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add a new section for changes since GDB 6.6. Rename
the section "Changes since GDB 6.5" into "Changes in GDB 6.6".
Move a couple of items into the new section as they did not
make it to 6.6.
2006-11-19 Joel Brobecker <brobecker@adacore.com>
GDB 6.6 branch created (branch timestamp: 2006-11-15 12:00)
* version.in: Bump version to 6.6.50.20061119-cvs.
2006-11-18 Pedro Alves <pedro_alves@portugalmail.pt>
* prologue-value.c (clear_entries): Fix memory leak.
2006-11-18 Pedro Alves <pedro_alves@portugalmail.pt>
* parse.c (write_exp_msymbol): Check SYMBOL_BFD_SECTION before
dereferencing it.
2006-11-17 Daniel Jacobowitz <dan@codesourcery.com>
* utils.c (string_to_core_addr): Use error instead of
internal_error.
* mi/mi-main.c (mi_execute_command): Check for a NULL message.
2006-11-17 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention QPassSignals.
2006-11-16 Maxim Grigoriev <maxim2405@gmail.com>
* MAINTAINERS (Responsible Maintainers): Add myself for Xtensa.
(Write After Approval): Add myself.
2006-11-16 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (PACKET_QPassSignals): New.
(last_pass_packet, remote_pass_signals): New.
(remote_protocol_features): Add QPassSignals.
(remote_query_supported): Correct an infinite loop.
(remote_open_1): Reset last_pass_packet.
(remote_resume): Call remote_pass_signals.
(_initialize_remote): Register "set remote pass-signals".
2006-11-14 Maxim Grigoriev <maxim@tensilica.com>
* NEWS: New port to Xtensa.
* Makefile.in: Add dependencies for Xtensa files.
* configure.tgt (xtensa*, xtensa*-*-elf*): New.
* configure.host (xtensa*-*-elf*): New.
* config/xtensa/xtensa.mt: New file.
* xtensa-config.c: New file.
* xtensa-tdep.h: New file.
* xtensa-tdep.c: New file.
2006-11-14 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (set_remote_cmd): Call help_list.
(show_remote_cmd): Skip legacy aliases. Handle non-show_cmd
entries. Add missed cleanup.
* cli/cli-setshow.c (cmd_show_list): Handle non-show_cmd entries.
2006-11-13 Paul Gilliam <pgilliam@us.ibm.com>
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Don't futz with
the floating point registers if there aren't any.
2006-11-12 Ben Harris <bjh21@NetBSD.org>
* arm-tdep.c (arm_unwind_pc): Use arm_addr_bits_remove.
2006-11-10 Daniel Jacobowitz <dan@codesourcery.com>
* frame.c (frame_register_unwind_location): New function.
(get_prev_frame_1): Check for UNWIND_NO_SAVED_PC.
(frame_stop_reason_string): Handle UNWIND_NO_SAVED_PC.
* frame.h (enum unwind_stop_reason): Add UNWIND_NO_SAVED_PC.
2006-11-10 Daniel Jacobowitz <dan@codesourcery.com>
* arch-utils.c (target_byte_order_user): Renamed from
target_byte_order.
(target_byte_order_auto, selected_byte_order): Removed.
(show_endian): Check target_byte_order_user.
(set_endian): Always update the architecture. Set
target_byte_order_user after success.
(target_architecture_auto): Removed.
(target_architecture_user): New.
(selected_architecture_name, show_architecture): Check it.
(set_architecture): Set target_architecture_user after success.
(gdbarch_from_bfd): Check the argument.
(default_byte_order): New.
(initialize_current_architecture): Set the global default
architecture and endianness.
(gdbarch_info_fill): Remove GDBARCH argument. Do not check the
previous architecture. Use exec_bfd, global selected architecture
and endianness, and global defaults.
* arch-utils.h (selected_byte_order): Remove prototype.
(gdbarch_info_fill): Update.
* exec.c (exec_file_attach): Update the architecture after removing
the current file.
* gdbarch.sh: Update comments.
(find_arch_by_info): Remove OLD_GDBARCH argument. Update call to
gdbarch_info_fill.
(gdbarch_find_by_info): Update call to find_arch_by_info.
* gdbarch.h, gdbarch.c: Regenerated.
* remote-sim.c (gdbsim_open): Use TARGET_BYTE_ORDER.
2006-11-09 Joel Brobecker <brobecker@adacore.com>
* sparc-tdep.c (sparc_fetch_instruction): Read instruction
using read_memory_nobpt.
2006-11-06 Jim Blandy <jimb@codesourcery.com>
* dwarf2loc.c (dwarf_expr_read_reg): Use frame_register_read
instead of frame_register. Doc fix.
2006-11-04 Vladimir Prus <vladimir@codesourcery.com>
* serial.c (serial_open): Strip leading spaces from program
name when opening pipe.
2006-11-03 Jim Blandy <jimb@codesourcery.com>
* dwarf2loc.c (dwarf_expr_read_reg): Use frame_unwind_register
instead of frame_register. Doc fix.
2006-11-02 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (struct dwarf2_per_cu_data): Update comment.
(load_full_comp_unit): Take OBJFILE argument and use it.
(dwarf2_build_psymtabs_hard): Skip partial units.
(process_queue): Pass OBJFILE to load_full_comp_unit. Check
type_hash for read in CUs. Test psymtab for NULL.
2006-11-02 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (arm_gdbarch_init): Handle EF_ARM_EABI_VER5.
2006-10-31 Vladimir Prus <vladimir@codesourcery.com>
* commands.h (enum command_class): Use different
values for class_deprecated and class_run.
* cli/cli-decode.c: (print_help_for_command): New.
(apropos_cmd): Use the above.
(help_list): Mention 'help all'
and 'apropos' when printing top-level help.
(help_all): Print the class name before printing
commands in that class. Don't print prefix commands
here, instead pass recurse flag to help_cmd_list.
Print list of unclassified commands at the end.
(help_cmd_list): When recursing, use all_commands class.
Recurse only if the class of the command matches.
2006-10-27 Andreas Schwab <schwab@suse.de>
* gdbcmd.h (detachlist): Declare.
* infcmd.c (_initialize_infcmd): Define "detach" as prefix
command.
* linux-fork.c (_initialize_linux_fork): Rename
"detach-checkpoint" to "detach checkpoint" and "detach-fork" to
"detach fork".
* cli/cli-cmds.c (detachlist): Define.
(init_cmd_lists): Initialize it.
* cli/cli-cmds.h (detachlist): Declare.
2006-10-25 Jim Blandy <jimb@codesourcery.com>
* p-valprint.c (pascal_object_print_value): Add 'static' keyword
to function definition, to match declaration earlier in file.
2006-10-21 Paul Brook <paul@codesourcery.com>
* remote.c (remote_fetch_registers): Fix error message.
2006-10-20 Daniel Jacobowitz <dan@codesourcery.com>
* gcore.c (MAX_COPY_BYTES): Define.
(gcore_copy_callback): Use it to limit allocation.
2006-10-19 Ulrich Weigand <uweigand@de.ibm.com>
* linux-thread-db.c (check_for_thread_db): Don't attempt to use
thread_db for remote targets.
* remote.c (remote_new_objfile): Always call predecessor on
new_objfile event chain.
2006-10-19 Joel Brobecker <brobecker@adacore.com>
* solib.c (libpthread_solib_p): New function.
(solib_add): Always read the symbols from the libpthread library.
2006-10-19 Andrew Stubbs <andrew.stubbs@st.com>
* breakpoint.c (describe_other_breakpoints): Add thread parameter.
Annotate display with thread number where appropriate.
(create_breakpoints): Add thread parameter to call to
describe_other_breakpoints.
2006-10-18 Jim Blandy <jimb@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* utils.c (query): Use defaulted_query.
(defaulted_query): Handle having no default answer. Print out
messages even if we have no terminal. Prevent memory corruption.
2006-10-18 Daniel Jacobowitz <dan@codesourcery.com>
* frame.c (struct frame_info): Add stop_reason.
(get_prev_frame_1): Set stop_reason. Don't call error for
stop reasons.
(get_frame_unwind_stop_reason, frame_stop_reason_string): New.
* frame.h (enum unwind_stop_reason): New.
(get_frame_unwind_stop_reason, frame_stop_reason_string): New
prototypes.
* stack.c (frame_info): Print the stop reason.
(backtrace_command_1): Print the stop reason for errors.
2006-10-18 Daniel Jacobowitz <dan@codesourcery.com>
* inferior.h (start_remote): Update prototype.
* infrun.c (start_remote): Take FROM_TTY. Call
post_create_inferior.
* monitor.c (monitor_open): Update call to start_remote.
* remote-sds.c (sds_start_remote, sds_open): Likewise.
* remote.c (remote_start_remote): Likewise.
(remote_start_remote_dummy): Removed.
(remote_open): Update call to remote_start_remote. Do not call
post_create_inferior here.
2006-10-18 Daniel Jacobowitz <dan@codesourcery.com>
* solib-svr4.c (debug_loader_offset_p, debug_loader_offset)
(debug_loader_name, svr4_default_sos): New.
(svr4_current_sos): Call svr4_default_sos.
(enable_break): Add a comment about AT_BASE. Set the new
variables and retry solib_add.
(svr4_clear_solib): Clear the new variables.
2006-10-18 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention support for TLS without debugging information.
2006-10-17 Daniel Jacobowitz <dan@codesourcery.com>
* remote-sim.c (gdbsim_kill): Call target_mourn_inferior.
(gdbsim_load): Don't bother to adjust inferior_ptid here.
(gdbsim_create_inferior): Mark the simulator as running.
(gdbsim_open): Don't bother fetching registers. Mark
the target as not running.
(gdbsim_xfer): When the program is not running, pass memory
requests down.
(gdbsim_mourn_inferior): Mark the target as not running.
* target.c (target_mark_running, target_mark_exited): New.
* target.h (target_has_execution): Update the comment.
(target_mark_running, target_mark_exited): New prototypes.
2006-10-17 Joel Brobecker <brobecker@adacore.com>
* breakpoint.c (free_valchain): Minor reformatting.
2006-10-17 Daniel Jacobowitz <dan@codesourcery.com>
* solib-svr4.c (LM_ADDR_CHECK): Suggest shared library mismatch.
2006-10-17 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (symtab.o): Update.
* symtab.h (matching_bfd_sections): New prototype.
* symtab.c (matching_bfd_sections): New.
(find_pc_sect_psymbol, find_pc_sect_symtab): Use it.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Likewise.
* printcmd.c (sym_info): Ignore separate debug objfiles.
2006-10-17 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_pid_to_str): Capitalize "Thread".
2006-10-15 Daniel Jacobowitz <dan@codesourcery.com>
PR remote/2158
* remote.c (remote_write_bytes): Throttle packet alignment
for small packets.
2006-10-16 Jeff Johnston <jjohnstn@redhat.com>
* linux-thread-db.c (thread_db_wait): Don't bother continuing if
the wait result indicates the program terminated with a
signal (from gdb-6.3-ia64-sigill-20051115.patch, a patch for
Fedora Core 5).
2006-10-11 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines): Call record_line upon
encountering a different subfile.
2006-10-11 Denis Pilat <denis.pilat@st.com>
* tui/tui-source.c (tui_set_source_content): handle source
files that contain non unix end-of-line.
2006-10-10 Daniel Jacobowitz <dan@codesourcery.com>
* ser-mingw.c (free_pipe_state, pipe_wait_handle): Update
for changes to pipe_select_thread.
(pipe_done_wait_handle): New.
(_initialize_ser_windows): Reference it.
2006-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (expprint.o, parse.o, target.o): Update.
* dwarf2loc.c (dwarf_expr_tls_address): Move body to
target_translate_tls_address. Call it.
* eval.c (evaluate_subexp_standard): Handle UNOP_MEMVAL_TLS.
* expprint.c (print_subexp_standard): Likewise.
(op_name_standard, dump_subexp_body_standard): Likewise.
* expression.h (enum exp_opcode): Add UNOP_MEMVAL_TLS.
(union exp_element): Add objfile.
* parse.c (write_exp_elt_objfile): New function.
(msym_tls_symbol_type): New.
(write_exp_msymbol): Handle TLS.
(operator_length_standard): Handle UNOP_MEMVAL_TLS.
(build_parse): Initialize msym_tls_symbol_type.
* parser-defs.h (write_exp_elt_objfile): New prototype.
* target.c (target_translate_tls_address): New.
* target.h (target_translate_tls_address): Add prototype.
2006-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* solib.c (solib_open): Handle an empty solib_absolute_prefix like a
missing one.
2006-10-09 Daniel Jacobowitz <dan@codesourcery.com>
* solib.c (solib_read_symbols): Stop if the file was not found.
2006-10-09 Paul Pluzhnikov <ppluzhnikov@charter.net>
PR c++/2116
* valops.c (find_overload_match): Check for a NULL name.
2006-10-06 Joel Brobecker <brobecker@adacore.com>
Fix PR symtab/2018
* dwarf2read.c (read_array_type): Set the type name if the name
attribute is present.
2006-10-05 Joel Brobecker <brobecker@adacore.com>
* blockframe.c (block_innermost_frame): Rewrite frame search logic.
2006-10-05 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (gdb_expat_h): New.
(xml_support_h): Add gdb_expat.h dependency.
(memory-map.o, xml-support.o): Likewise.
* gdb_expat.h: New file.
* xml-support.h: Include it.
* memory-map.c, xml-support.c: Likewise. Remove XML_STATUS_OK
definitions.
2006-10-05 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (get_remote_state_raw): Renamed from get_remote_state.
(get_remote_state): New function.
(init_remote_state, _initialize_remote): Use get_remote_state_raw.
2006-10-04 Fred Fish <fnf@specifix.com>
* vec.c: Include defs.h first. This pulls in config.h which can
affect other includes.
2006-10-04 Joel Brobecker <brobecker@adacore.com>
* somread.c (som_symtab_read): Avoid using alloca for potentially
large buffers.
2006-10-04 Daniel Jacobowitz <dan@codesourcery.com>
* arch-utils.h (gdbarch_info_fill): Remove duplicate prototype.
2006-10-03 Daniel Jacobowitz <dan@codesourcery.com>
* memory-map.c (XML_STATUS_OK, XML_STATUS_ERROR): Provide default
definitions.
* xml-support.c (XML_STATUS_OK, XML_STATUS_ERROR): Likewise.
2006-09-22 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_write_bytes_aux): Doc fix.
2006-09-21 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (SFILES): Add target-memory.c.
(COMMON_OBS): Add target-memory.o.
* memattr.c (lookup_mem_region): Adjust handling for
the top of memory. Improve comments.
* remote.c (packet_check_result): New function, split out
from packet_ok. Recognize "E." as an error prefix.
(packet_ok): Use it.
(remote_write_bytes_aux): New function, renamed from
remote_write_bytes. Take packet header, packet format,
and length flag as arguments.
(remote_write_bytes): Rewrite to use remote_write_bytes_aux.
(remote_send_printf, restore_remote_timeout)
(remote_flash_timeout, remote_flash_erase, remote_flash_write)
(remote_flash_done): New.
(remote_xfer_partial): Handle flash writes.
(init_remote_ops, init_remote_async_ops): Set to_flash_erase
and to_flash_done.
* symfile.c (struct load_section_data): Include a pointer to
the cumulative stats and a request queue. Move most members
to other types.
(struct load_progress_data, struct load_progress_section_data): New
types.
(load_progress): Handle a NULL baton and zero bytes. Update for
type changes.
(load_section_callback): Create memory write requests instead of
writing to memory. Don't print the progress message here.
(clear_memory_write_data): New function.
(generic_load): Use target_write_memory_blocks.
* target-memory.c: New file.
* target.c (update_current_target): Mention new uninherited methods.
(memory_xfer_partial): Issue an error for flash writes.
(target_flash_erase, target_flash_done): New functions.
(target_write_with_progress): Call the progress callback at the
start also.
* target.h (enum target_object): Add TARGET_OBJECT_FLASH.
(target_write_with_progress): Update comment.
(struct target_ops): Add to_flash_erase and to_flash_done.
(target_flash_erase, target_flash_done, struct memory_write_request)
(memory_write_request_s, enum flash_preserve_mode)
(target_write_memory_blocks): New, including a vector type
for memory_write_request_s.
2006-09-21 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* Makefile.in (SFILES): Add memory-map.c and xml-support.c.
(memory_map_h, xml_support_h): New.
(target_h): Add vec_h dependency.
(COMMON_OBS): Add memory-map.o and xml-support.o.
(memory-map.o, xml-support.o): New rules.
(remote.o): Update.
* exceptions.h (enum errors): Add XML_PARSE_ERROR.
* infcmd.c (run_command_1, attach_command): Call target_pre_inferior.
* memattr.c (default_mem_attrib): Initialize blocksize.
(target_mem_region_list, mem_use_target)
(target_mem_regions_valid, mem_region_cmp, mem_region_init)
(require_user_regions, require_target_regions)
(invalidate_target_mem_regions): New.
(create_mem_region): Use mem_region_init.
(mem_clear): Move higher.
(lookup_mem_region): Use require_target_regions.
(mem_command): Implement "mem auto".
(mem_info_command): Handle target-supplied regions and flash
attributes.
(mem_enable_command, mem_disable_command, mem_delete_command): Use
require_user_regions.
(_initialize_mem): Mention "mem auto" in help.
* memattr.h (enum mem_access_mode): Add MEM_FLASH.
(struct mem_attrib): Add blocksize.
(invalidate_target_mem_regions, mem_region_init, mem_region_cmp): New
prototypes.
* remote.c: Include "memory-map.h".
(PACKET_qXfer_memory_map): New enum value.
(remote_protocol_features): Add qXfer:memory-map:read.
(remote_xfer_partial): Handle memory maps.
(remote_memory_map): New.
(init_remote_ops, init_remote_async_ops): Set to_memory_map.
(_initialize_remote): Register qXfer:memory-map:read.
* target.c (update_current_target): Mention to_memory_map.
(target_memory_map, target_pre_inferior): New.
(target_preopen): Call target_pre_inferior.
* target.h: Include "vec.h".
(enum target_object): Add TARGET_OBJECT_MEMORY_MAP.
(struct target_ops): Add to_memory_map.
(target_memory_map, target_pre_inferior): New prototypes.
* memory-map.c, memory-map.h, xml-support.c, xml-support.h: New files.
2006-09-21 Daniel Jacobowitz <dan@codesourcery.com>
* ada-lex.l (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
(strtoulst): Moved to ...
* utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
(strtoulst): ... here. Enhanced to behave more similarly
to strtoul.
* defs.h (strtoulst): New prototype.
2006-09-21 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (memattr_h, memattr.o): Update.
* memattr.h: Include "vec.h".
(struct mem_region): Remove linked list pointer.
(mem_region_s): New typedef and corresponding vector.
* memattr.c: Include "vec.h".
(mem_region_chain): Delete.
(mem_region_list): New vector pointer.
(mem_region_lessthan): New function.
(create_mem_region): Remove unused return value. Use vector
operations. Remove linear search.
(delete_mem_region): Delete.
(lookup_mem_region): Use vector operations. Add a FIXME.
(mem_info_command): Update to work with vectors.
(mem_enable, mem_enable_command, mem_disable, mem_disable_command)
(mem_free, mem_delete): Likewise.
2006-09-21 Nathan Sidwell <nathan@codesourcery.com>
* vec.h: New file.
* vec.c: New file.
* Makefile.in (SFILES): Add vec.c.
(vec_h): New.
(COMMON_OBJS): Add vec.o.
(vec.o): New target.
2006-09-20 Daniel Jacobowitz <dan@codesourcery.com>
PR remote/2154
* remote.c (remote_thread_alive): Remove local buf.
(remote_get_threadinfo): Remove local threadinfo_pkt.
(remote_get_threadlist): Remove unused threadlist_packet.
(remote_current_thread): Remove local buf.
(remote_threads_info): Set bufp after getpkt.
(remote_threads_extra_info): Remove local bufp.
(get_offsets): Set buf after getpkt.
(remote_check_symbols): Set reply after getpkt.
(remote_vcont_probe): Set buf after getpkt.
(remote_resume): Set buf after set_thread.
(remote_wait, remote_async_wait): Set buf after getpkt.
(fetch_register_using_p): Set buf after remote_send.
(remote_fetch_registers): Likewise.
(store_register_using_P): Don't use buf after remote_send.
(check_binary_download, remote_write_bytes)
(remote_read_bytes, remote_rcmd): Remove local buf.
2006-09-17 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Don't emit error
if high requested frame number is larger than number of available
frames.
2006-09-16 Nick Roberts <nickrob@snap.net.nz>
* linux-nat.c (linux_test_for_tracefork): Don't leave zombie
process.
2006-09-16 Andrzej Zaborowski <balrog@zabor.org>
* interps.c (interpreter_exec_cmd): Restore interpreter properties.
2006-09-10 Daniel Jacobowitz <dan@codesourcery.com>
PR threads/2149
* infrun.c (handle_inferior_event): Context switch after fork
and exec events.
2006-09-10 Daniel Jacobowitz <dan@codesourcery.com>
* infcall.c (call_function_by_hand): Check for function pointer
types.
2006-09-10 Andreas Schwab <schwab@suse.de>
* m68k-tdep.c (m68k_analyze_register_saves): Fix decoding of
`move.l %R,-(%sp)'.
2006-09-07 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Don't emit
error if high requested frame number is larger then number
of available frames.
2006-09-07 Joel Brobecker <brobecker@adacore.com>
From Stephan Springl <springl-gdb@bfw-online.de>
* fork-child.c (fork_inferior): Fix typo.
2006-08-28 DJ Delorie <dj@redhat.com>
* m32c-tdep.c (m32c_decode_srcdest4): Initialize fields in sd
that may not be initialized elsewhere.
(m32c_decode_sd23): Likewise.
2006-08-25 Daniel Jacobowitz <dan@codesourcery.com>
* buildsym.c (finish_block): Don't adjust the boundaries of
nested functions.
2006-08-24 Andreas Schwab <schwab@suse.de>
* symfile.c (add_symbol_file_command): Fix off-by-one when
extending sect_opts.
2006-08-24 Nick Roberts <nickrob@snap.net.nz>
* mi/gdb-mi.el: Refer to next release of Emacs as 22.1.
2006-08-23 Nick Roberts <nickrob@snap.net.nz>
* mi/gdb-mi.el (gdbmi): Remove gdb-force-update, initialize
other variables.
(gdbmi-send): Ensure any text properties can be removed.
(gdbmi-prompt1): Update to gdb-ui.el
(gud-gdbmi-marker-filter): Defer setting of gud-running.
Keep gdb-done-regexp for partial-output-buffer.
(gdb-stack-list-frames-handler): Add face to function names.
2006-08-22 Mark Kettenis <kettenis@gnu.org>
* valprint.c (val_print_type_code_flags): Fix GNU coding standards
violation.
* alpha-tdep.c (alpha_register_to_value, alpha_value_to_register)
(alpha_push_dummy_call, alpha_extract_return_value)
(alpha_breakpoint_from_pc, alpha_read_insn)
(alpha_get_longjmp_target, alpha_supply_int_regs)
(alpha_fill_int_regs, alpha_supply_fp_regs, alpha_fill_fp_regs)
(alpha_next_pc): Use gdb_byte instead of (unsigned) char where
appropriate.
* sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type)
(sparc64_fprs_type): New variables.
(sparc64_init_types): New function.:
(sparc64_register_info): Use appropriate flag types for %fsr and
%fprs.
(sparc64_pseudo_register_info): Use appropriate type for %pstate.
(_initialize_sparc64_tdep): New function.
* valprint.c (val_print_type_code_flags): Fix for bitfields larger
than 32 bits.
* gdbtypes.c (init_flags_type): Set all fields to zero instead of
just the first one.
2006-08-22 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (INTERNAL_CPPFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use it.
2006-08-22 Michael Snyder <Michael.Snyder@PalmSource.com>
* MAINTAINERS: Update my email address.
2006-08-19 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (amd64_linux_tdep_h): New.
(amd64-linux-nat.o, amd64-linux-tdep.o): Update.
* amd64-linux-nat.c (amd64_linux_gregset64_reg_offset): Add
ORIG_RAX.
(_initialize_amd64_linux_nat): Set amd64_native_gregset64_num_regs.
* amd64-linux-tdep.c (amd64_linux_register_name)
(amd64_linux_register_type, amd64_linux_register_reggroup_p)
(amd64_linux_write_pc): New.
(amd64_linux_init_abi): Use them, and update num_regs.
* amd64-linux-tdep.h: New file.
* amd64-tdep.c (amd64_register_name, amd64_register_type): Make
public.
* amd64-tdep.h (amd64_register_name, amd64_register_type): New
prototypes.
* regformats/reg-x86-64-linux.dat: New file.
2006-08-18 Daniel Jacobowitz <dan@codesourcery.com>
* infrun.c (handle_inferior_event): Check the current frame ID
before unwinding to the previous frame.
2006-08-18 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (quirk_gcc_member_function_pointer): Add GCC PR
number in a comment.
2006-08-18 Mark Kettenis <kettenis@gnu.org>
* sparc-nat.c (sparc_xfer_wcookie): Signal EOF. Tweak comment.
2006-08-18 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (quirk_gcc_member_function_pointer): New.
(read_structure_type): Call it.
2006-08-16 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention "set trust-readonly-sections" fix.
2006-08-16 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c, target.c: Strip trailing whitespace.
2006-08-15 Daniel Jacobowitz <dan@codesourcery.com>
PR remote/1966
* dcache.c (dcache_write_line): Use target_write.
(dcache_read_line): Use target_read.
* mi/mi-main.c (mi_cmd_data_read_memory): Use target_read.
* symfile.c (struct load_section_data): Add new per-section
members.
(load_progress): New function.
(load_section_callback): Pass load_progress to the new
target_write_with_progress.
* target.c (current_xfer_partial, memory_xfer_partial): New.
(target_xfer_partial): New prototype.
(target_xfer_memory, target_xfer_partial_p, xfer_using_stratum)
(do_xfer_memory, target_xfer_memory_partial)
(target_read_memory_partial, target_write_memory_partial): Delete.
(trust_readonly): Move higher in the file.
(update_current_target): Use current_xer_partial.
(target_xfer_partial): Use memory_xfer_partial. Handle
TARGET_OBJECT_RAW_MEMORY specially.
(target_read_memory): Use target_read.
(target_write_memory): Use target_write.
(default_xfer_partial): Call to_xfer_partial directly.
(target_write_with_progress): New function, based on target_write.
(target_write): Call it.
* target.h (enum target_object): Add TARGET_OBJECT_RAW_MEMORY.
(target_write_with_progress): New prototype.
(do_xfer_memory, target_read_memory_partial)
(target_write_memory_partial): Delete prototypes.
2006-08-15 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_write_bytes): Take a const buffer argument.
Do the checks from remote_xfer_memory.
(remote_read_bytes): Do the checks from remote_xfer_memory.
(remote_xfer_memory): Remove checks pushed into lower level
functions.
(remote_xfer_partial): Call remote_write_bytes and remote_read_bytes
directly.
* remote.h (remote_write_bytes): Update prototype.
2006-08-11 Andrew Stubbs <andrew.stubbs@st.com>
* NEWS: Add 'set trace-commands' command.
2006-08-10 Andrew Stubbs <andrew.stubbs@st.com>
* cli/cli-script.c (execute_user_command): Update command_next_depth
on user-command call.
2006-08-09 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry for new substitute-path commands.
2006-08-08 Joel Brobecker <brobecker@adacore.com>
* source.c: #include gdb_assert.h.
(substitute_path_rule): New struct.
(substitute_path_rules): New static global variable.
(substitute_path_rule_matches): New function.
(get_substitute_path_rule): New function.
(rewrite_source_path): New function.
(find_and_open_source): Add source path rewriting support.
(strip_trailing_directory_separator): New function.
(find_substitute_path_rule): New function.
(add_substitute_path_rule): New function.
(delete_substitute_path_rule): New function.
(show_substitute_path_command): New function.
(unset_substitute_path_command): New function.
(set_substitute_path_command): New function.
(_initialize_source): Add new substitute-path commands.
* Makefile.in (source.o): Add dependency on gdb_assert.h.
2006-08-08 Joel Brobecker <brobecker@adacore.com>
* i386-tdep.c (i386_follow_jump): Use read_memory_nobpt to read
instructions.
(i386_analyze_struct_return): Likewise.
(i386_skip_probe): Likewise.
(i386_match_insn): Likewise.
(i386_analyze_frame_setup): Likewise.
(i386_analyze_register_saves): Likewise.
(i386_skip_prologue): Likewise.
2006-08-08 Joel Brobecker <brobecker@adacore.com>
* gdbcore.h (read_memory_nobpt): New function name instead of
deprecated_read_memory_nobpt.
* breakpoint.c (read_memory_nobpt): New function name instead
of deprecated_read_memory_nobpt.
Adjust calls to old deprecated_read_memory_nobpt accordingly.
* alpha-tdep.c: Adjust calls to deprecated_read_memory_nobpt
accordingly.
* alphanbsd-tdep.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* hppa-linux-tdep.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-linux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* s390-tdep.c: Likewise.
2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
* configure.ac: Check for expat.
* acinclude.m4: Include AC_LIB_HAVE_LINKFLAGS dependencies.
* Makefile.in (LIBEXPAT): New.
(CLIBS): Include $(LIBEXPAT).
* README: Mention expat.
* configure, config.in: Regenerated.
2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
* config/sparc/embed.mt: New file.
* configure.tgt (sparc-*-rtems*): Use embed.mt.
2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (objfiles.o, symfile.o): Update.
* objfiles.c: Include "expression.h" and "parser-defs.h".
(free_objfile): Clear global blocks.
* symfile.c: Include "parser-defs.h".
(clear_symtab_users): Clear global blocks.
2006-08-08 Thiemo Seufer <ths@mips.com>
* breakpoint.c (update_breakpoints_after_exec): Fix type mismatch.
2006-08-08 Vladimir Prus <vladimir@codesourcery.com>
* symfile.c (download_write_size): Remove.
(show_download_write_size): Remove.
(load_section_callback): Don't use download_write_size.
(_initialize_symfile): Don't register download_write_size.
* NEWS: Mention 'download-write-size' removal.
2006-08-06 Daniel Jacobowitz <dan@codesourcery.com>
* expprint.c (print_subexp_standard, dump_subexp_body_standard): Add
support for member pointers.
2006-08-02 Mark Kettenis <kettenis@gnu.org>
* arm-tdep.h: Add multiple inclusion protection.
(struct gdbarch): Add forward declaration.
(armobsd_regset_from_core_section): New prototype.
* armbsd-tdep.c: New file.
* armobsd-tdep.c: Include "gdb_string.h".
(armobsd_init_abi): Set regset_from_core_section.
(armobsd_core_osabi_sniffer): New function.
(_initialize_armobsd_tdep): Register armobsd_core_osabi_sniffer.
* Makefile.in (ALLDEPFILES): Add armbsd-tdep.c.
(armbsd-tdep.o): New dependency.
(armnbsd-tdep.o): Update dependencies.
* config/arm/obsd.mt (TDEPFILES): Add armbsd-tdep.o and corelow.o.
2006-08-02 Thiemo Seufer <ths@mips.com>
* linux-thread-db.c (thread_db_get_thread_local_address): Fix type
mismatch.
* tui/tui-stack.c (tui_show_frame_info): Likewise.
2006-08-01 Daniel Jacobowitz <dan@codesourcery.com>
* c-exp.y (type): Remove incorrect pointer to member case.
* objc-exp.y (type): Likewise.
* p-exp.y (type): Likewise.
2006-08-01 Mark Kettenis <kettenis@gnu.org>
* arm-tdep.h (enum struct_return): New.
(struct gdbarch_tdep): Add struct_return member.
* arm-tdep.c (arm_return_value): Return
RETURN_VALUE_STRUCT_CONVENTION for aggregates when the ABI uses
pcc_struct_return.
(arm_gdbarch_init): Default to reg_struct_return.
* armobsd-tdep.c (armobsd_init_abi): Set pcc_struct_return.
2006-07-31 Mark Kettenis <kettenis@gnu.org>
* alpha-tdep.h (ALPHA_S0_REGNUM): New define.
* alphabsd-nat.c: Include <sys/types.h>, <sys/signal.h>,
<machine/pcb.h> and "bsd-kvm.h".
(alphabsd_supply_pcb): New function.
(_initialize_alphabsd_nat): Enable libkvm interface.
* Makefile.in (alphabsd-nat.o): Update dependencies.
* config/alpha/fbsd.mh (NATDEPFILES): Add bsd-kvm.o.
(LOADLIBES): New variable.
* config/alpha/nbsd.mh (NATDEPFILES): Add bsd-kvm.o.
(LOADLIBES): New variable.
2006-07-31 Fred Fish <fnf@specifix.com>
* arm-tdep.c (arm_make_prologue_cache): Use FRAME_OBSTACK_ZALLOC
instead of calling frame_obstack_zalloc directly.
(arm_make_stub_cache): Ditto.
* frame-unwind.h: Ditto.
* frame.c (create_new_frame): Ditto.
2006-07-27 Bob Wilson <bob.wilson@acm.org>
* MAINTAINERS (Write After Approval): Add myself.
2006-07-27 Bob Wilson <bob.wilson@acm.org>
* main.c (captured_main): Print a newline after calling
print_gdb_version instead of waiting until after the symbol file
has been read. Adjust error_pre_print, quit_pre_print, and
warning_pre_print values.
2006-07-27 Roger Sayle <roger@eyesopen.com>
Daniel Jacobowitz <dan@codesourcery.com>
* irix5-nat.c (fetch_core_registers): Simplify and correct logic.
2006-07-27 Daniel Jacobowitz <dan@codesourcery.com>
* target.h (target_read_stralloc): New prototype.
* target.c (target_read_alloc_1): Renamed from target_read_alloc.
Take new PADDING argument.
(target_read_alloc): Use it.
(target_read_stralloc): New function.
2006-07-26 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_protocol_features): Correct qPart to qXfer.
2006-07-25 Daniel Jacobowitz <dan@codesourcery.com>
* eval.c (evaluate_subexp_for_address): Don't incorrectly discard
calls to C++ operator*.
2006-07-24 Roger Sayle <roger@eyesopen.com>
Daniel Jacobowitz <dan@codesourcery.com>
* solib-irix.c (gdb_int32_bytes): Use gdb_byte instead of char.
(gdb_int64_bytes): Likewise.
(fetch_lm_info): Use .b fields of gdb_int32_bytes and gdb_int64_bytes
as first argument to extract_unsigned_integer to silence compiler
warnings.
2006-07-24 Frederic Riss <frederic.riss@st.com>
* dwarf2read.c (struct dwarf2_per_objfile): Add has_section_at_zero
field.
(dwarf2_locate_sections): Initialize
dwarf2_per_objfile->has_section_at_zero.
(dwarf2_get_pc_bounds): Use dwarf2_per_objfile->has_section_at_zero
instead of HAS_RELOC test.
(read_partial_die): Ditto.
2006-07-24 Daniel Jacobowitz <dan@codesourcery.com>
* corefile.c (reopen_exec_file): Only check for an open exec file.
Use exec_file_attach.
* exec.c (exec_open): Make static.
(exec_file_command): Don't use target_preopen. Query directly about
changing the file.
* gdbcore.h (exec_open): Remove prototype.
2006-07-24 Frederic Riss <frederic.riss@st.com>
* regcache.c (struct regcache): Make register_valid_p a signed char
array.
2006-07-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* linux-thread-db.c (thread_db_wait): Remove libthread_db
after exec events.
2006-07-24 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention Windows cross debugging support.
2006-07-23 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (linux_nat_add_target): Remove extern.
* linux-nat.h (thread_db_init): New prototype.
2006-07-22 Daniel Jacobowitz <dan@codesourcery.com>
* configure.tgt: Build gdbserver for Cygwin and mingw32.
2006-07-22 Daniel Jacobowitz <dan@codesourcery.com>
* config/i386/cygwin.mt (DEPRECATED_TM_FILE): Delete.
* config/i386/nm-cygwin.h: Add contents of tm-cygwin.h.
* config/i386/tm-cygwin.h: Delete file.
2006-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* infrun.c (handle_inferior_event): Typo.
2006-07-21 Andrew Stubbs <andrew.stubbs@st.com>
* cli/cli-cmds.c (source_verbose, trace_commands): New variables.
(source_script): New function.
(source_verbose_cleanup): New function.
(source_command): Move old contents to source_script.
Make function static. Parse -v option and call source_script.
(init_cli_cmds): Update source command help.
Add 'set trace-commands' command.
* cli/cli-script.c (command_next_depth): New static variable.
(suppress_next_print_command_trace): New static variable.
(reset_command_nest_depth): New function.
(print_command_trace): New function.
(execute_control_command): Split the continue_control and break_control
cases, add calls to print_command_trace and count the nest depth.
(while_command): Set suppress_next_print_command_trace.
(if_command): Likewise.
* top.c (execute_command): Call print_command_trace.
* cli/cli-cmds.h (source_verbose, trace_commands): New extern variables.
(source_command): Change to source_script.
* main.c (captued_main): Use source_script instead of source_command.
* top.h (source_command): Change to source_script.
* event-top.c (display_gdb_prompt): Call reset_command_nest_depth.
* cli/cli-script.h (print_command_trace): Export.
(reset_command_nest_depth): Likewise.
2006-07-20 Daniel Jacobowitz <dan@codesourcery.com>
* eval.c (evaluate_struct_tuple): Skip static fields.
2006-07-19 Mark Kettenis <kettenis@gnu.org>
* alphaobsd-tdep.c: Include "obsd-tdep.h".
(alphaobsd_init_abi): Set skip_solib_resolver.
* Makefile.in (alphaobsd-tdep.o): Update dependencies.
* config/alpha/obsd.mt (TDEPFILES): Add obsd-tdep.o.
* arm-tdep.c (arm_gdbarch_init): Get default floating-point model
from ELF flags for binaries produced by the GNU toolchain.
2006-07-18 Nathan Sidwell <nathan@codesourcery.com>
* remote-fileio.c (remote_fileio_func_rename): Reorder to process
input buffer before reading memory.
(remote_fileio_func_stat): Likewise.
2006-07-18 Daniel Jacobowitz <dan@codesourcery.com>
* blockframe.c (find_pc_partial_function): Use the minimal symbol
size to control the cache entry, if available.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Handle minimal
symbols with zero and non-zero sizes differently.
2006-07-18 Daniel Jacobowitz <dan@codesourcery.com>
* linux-thread-db.c (td_thr_getfpregs_p, td_thr_getgregs_p)
(td_thr_setfpregs_p, td_thr_setgregs_p, thread_db_get_info)
(thread_db_fetch_registers, thread_db_store_registers)
(thread_db_thread_alive, thread_db_state_str): Delete.
(thread_db_load): Don't look up regset functions.
(thread_db_pid_to_str): Simplify.
(thread_db_extra_thread_info): New.
(init_thread_db_ops): Do not set to_fetch_registers,
to_store_registers, or to_thread_alive. Set to_extra_thread_info.
* Makefile.in: Remove linux-thread-db.o rule.
2006-07-18 Mark Kettenis <kettenis@gnu.org>
* armobsd-tdep.c: Include "trad-frame.h" and "tramp-frame.h".
(armobsd_sigframe_init): New function.
(armobsd_sigframe): New variable.
(armobsd_init_abi): Prepend armobsd_sigframe unwinder.
* Makefile.in (armobsd-tdep.o): Update dependencies.
2006-07-18 Denis PILAT <denis.pilat@st.com>
* monitor.c: Remove unused prototypes.
2006-07-18 Vladimir Prus <vladimir@codesourcery.com>
* target.c (tcomplain): Mark with ATTR_NORETURN.
* defs.h (print_transfer_performance): Improve comments.
2006-07-17 Mark Kettenis <kettenis@gnu.org>
* printcmd.c: Coding style fixes: add missing spaces in comments
and wrapping long lines.
(delete_display, enable_display_command, disable_display_command)
(printf_command, display_info, undisplay_command, free_display)
(display_command, x_command, address_info, set_command)
(inspect_command, call_command, print_command, print_command_1)
(validate_format, print_formatted, decode_format, sym_format):
Remove prototypes.
(x_command): Make static.
(printf_command): Convert error into internal consistency check.
(address_info): Avoid assignment within function call.
(printf_command): Avoid redundant cast.
* tracepoint.c (x_command): Remove extern prototype.
* armobsd-tdep.c (armobsd_init_abi): Set skip_solib_resolver.
* Makefile.in (armobsd-tdep.o): Update dependencies.
* config/arm/obsd.mt (TDEPFILES): Add obsd-tdep.o.
2006-07-16 Mark Kettenis <kettenis@gnu.org>
* armobsd-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add armobsd-tdep.c.
(armobsd-tdep.o): New dependency.
* config/arm/obsd.mt: New file.
* configure.tgt: (arm*-*-openbsd*): Set gdb_target to obsd.
* gdbarch.sh (deprecated_saved_pc_after_call): Delete.
* gdbarch.h, gdbarch.c: Re-generate.
* arm-tdep.c (arm_saved_pc_after_call): Delete.
(arm_gdbarch_init): Do not set deprecated_saved_pc_after_call.
2006-07-16 Alfred M. Szmidt <ams@gnu.org>
* gnu-nat.c: Undefine _process_user_ before including
<hurd/process_request.h>.
(gnu_resume): Supply missing argument to error().
(gnu_read_inferior): Add extra parenthesis around arithmetic
expression to silence warnings from GCC.
(gnu_write_inferior): Likewise.
(gnu_xfer_memory): Changed type of MYADDR to `gdb_byte *'.
2006-07-16 Mark Kettenis <kettenis@gnu.org>
* armnbsd-tdep.c (arm_netbsd_elf_init_abi): Use
svr4_ilp_fetch_link_map_offsets.
2006-07-15 Mark Kettenis <kettenis@gnu.org>
* armnbsd-tdep.c: Don't include "nbsd-tdep.h".
* config/arm/nbsd.mt (TDEPFILES): Remove nbsd-tdep.o.
(DEPRECATED_TM_FILE): Remove.
* Makefile.in (armnbsd-tdep.o): Update dependencies.
2006-07-14 Joel Brobecker <brobecker@adacore.com>
* PROBLEMS: Document threads/2137.
2006-07-13 Mark Kettenis <kettenis@gnu.org>
* config/alpha/tm-nbsd.h: Remove file.
* config/alpha/nbsd.mt (DEPRECATED_TM_FILE): Remove.
2006-07-13 Corinna Vinschen <vinschen@redhat.com>
* mips-tdep.c (mips_integer_to_address): Simplify be calling
extract_signed_integer directly. Fix comment.
2006-07-13 Corinna Vinschen <vinschen@redhat.com>
* m32c-tdep.c (m32c_banked_register): New function.
(m32c_banked_read): Use m32c_banked_register function to evaluate
real register number.
(m32c_banked_write): Ditto.
(m32c_virtual_frame_pointer): New function.
(m32c_gdbarch_init): Add set_gdbarch_virtual_frame_pointer call.
2006-07-13 Nathan Sidwell <nathan@codesourcery.com>
* m68k-tdep.c (m68k_frame_align): New.
(m68k_gdbarch_init): Set frame_align here.
2006-07-13 Denis PILAT <denis.pilat@st.com>
* interps.c (interpreter_completer): Allocate one more item to the
'matches' list and set them all to 0 with a xcalloc.
2006-07-13 Nick Roberts <nickrob@snap.net.nz>
* annotate.c (annotate_frame_begin): Re-instate frame-begin
annotation for level 3 annotations.
2006-07-13 Paul N. Hilfinger <Hilfinger@adacore.com>
Daniel Jacobowitz <dan@codesourcery.com>
* infcall.c (value_arg_coerce): Use value_cast_pointers for
references. Avoid value_cast to a reference type. Don't silently
convert pointers to references.
* valops.c (value_cast_pointers): New, based on value_cast.
(value_cast): Use it. Reject reference types.
(value_ref): New.
(typecmp): Use it.
* value.h (value_cast_pointers, value_ref): New prototypes.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (unpack_varlen_hex): Correct type of retval.
Reported by Zhigang Gong <zhigang.gong@gmail.com>.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (dwarf2_symbol_mark_computed): Handle corrupted
or missing location list information. Suggested by Jan
Kratochvil <lace@jankratochvil.net>.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (arm_linux_tdep_h): New variable.
(arm-linux-nat.o, arm-linux-tdep.o): Update.
* arm-linux-nat.c: Include "arm-linux-tdep.h".
(typeNone, typeSingle, typeDouble, typeExtended)
(FPWORDS, ARM_CPSR_REGNUM, FPREG, FPA11)
(fetch_nwfpe_single, fetch_nwfpe_double, fetch_nwfpe_none)
(fetch_nwfpe_extended, fetch_nwfpe_register, store_nwfpe_single)
(store_nwfpe_double, store_nwfpe_extended, store_nwfpe_register):
Delete.
(fetch_fpregister, fetch_fpregs, store_fpregister, store_fpregs):
Use gdb_byte buffers, NWFPE_FPSR_OFFSET, supply_nwfpe_register,
and collect_nwfpe_register.
(fill_gregset, supply_gregset, fill_fpregset, supply_fpregset): Use
new regset functions.
* arm-linux-tdep.c: Include "regset.h" and "arm-linux-tdep.h".
(arm_apcs_32): New declaration.
(ARM_LINUX_SIZEOF_GREGSET, arm_linux_supply_gregset)
(arm_linux_collect_gregset, typeNone, typeSingle, typeDouble)
(typeExtended, supply_nwfpe_register, collect_nwfpe_register)
(arm_linux_supply_nwfpe, arm_linux_collect_nwfpe)
(arm_linux_regset_from_core_section): New.
(arm_linux_init_abi): Register arm_linux_regset_from_core_section.
* arm-linux-tdep.h: New file.
* arm-tdep.h (struct regset): Declare.
(struct gdbarch_tdep): Add gregset, fpregset members.
* config/arm/linux.mh (NATDEPFILES): Remove corelow.o and
core-regset.o.
* config/arm/linux.mt (TDEPFILES): Add corelow.o.
2006-07-12 Jan Kratochvil <lace@jankratochvil.net>
* infrun.c (handle_inferior_event): Fixed typos in printf.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* remote.c (REMOTE_ALIGN_WRITES): New.
(remote_write_bytes): Align large write packets. Remove unused
payload_start variable.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (PACKET_qXfer_auxv): New, renamed from PACKET_qPart_auxv.
(remote_supported_packet): Remove #if 0.
(remote_protocol_features): Add qPart:auxv:read.
(remote_unescape_input): New function.
(readchar): Don't mask off the high bit.
(read_frame): Use fputstrn_filtered for packet data.
(getpkt_sane): Return the number of bytes read or -1. Use
fputstrn_unfiltered.
(remote_read_qxfer): New.
(remote_xfer_partial): Use it for TARGET_OBJECT_AUXV.
(_initialize_remote): Update packet registration.
* defs.h (fputstrn_filtered): New prototype.
* utils.c (fputstrn_filtered): New.
* NEWS: Mention qXfer.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* target.c (target_read): Stop if target_read_partial returns 0
when some bytes have already been read.
(target_write): Likewise for target_write_partial.
(target_read_partial, target_write_partial): Make static.
(target_read_alloc): New.
* target.h: Doc fixes.
(target_read_partial, target_write_partial): Delete prototypes.
(target_read_alloc): New prototype.
* auxv.c (target_auxv_read): Delete.
(target_auxv_search, fprint_target_auxv): Use target_read_alloc.
* auxv.h (target_auxv_read): Delete prototype.
* avr-tdep.c (avr_io_reg_read_command): Use target_read_alloc.
* ia64-tdep.c (getunwind_table, get_kernel_table): Likewise.
* linux-nat.c (linux_nat_make_corefile_notes): Likewise.
* procfs.c (procfs_make_note_section): Likewise.
* remote.c (remote_xfer_partial): Don't loop here.
* sparc-tdep.c (sparc_fetch_wcookie): Use target_read.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* arm-linux-tdep.c: Doc fixes.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT)
(ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT)
(ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): New
constants.
(arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init): Support
the new signal frame layouts.
2006-07-12 Mike Frysinger <vapier@gentoo.org>:
Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (init.c) [LANG, LC_ALL]: Set to `c'.
* gdb_indent.sh, gdb_mbuild.sh, observer.sh: Likewise.
* gdbarch.sh: Correct comment.
2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
* MAINTAINERS: Add Alfred Szmidt for the Hurd.
2006-07-11 Mark Kettenis <kettenis@gnu.org>
* alpha-tdep.h (ALPHA_INSN_SIZE): New define.
2006-07-10 Mark Kettenis <kettenis@gnu.org>
* alphaobsd-tdep.c: New file.
* alphanbsd-tdep.c (_initialize_alphanbsd_tdep): Do not register a
handler for GDB_OSABI_OPENBSD_ELF.
* Makefile.in (ALLDEPFILES): Add alphaobsd-tdep.c.
(alphaobsd-tdep.o): New target.
* config/alpha/obsd.mt: New file.
* configure.tgt (alpha*-*-openbsd*): Set gdb_target to obsd.
2006-07-10 Richard Henderson <rth@redhat.com>
* alpha-tdep.h (struct gdbarch_tdep): Add return_in_memory.
* alpha-tdep.c (alpha_register_byte): Remove.
(alpha_extract_struct_value_address): Remove.
(alpha_return_value): New.
(alpha_return_in_memory_always): New.
(alpha_gdbarch_init): Set tdep->return_in_memory. Don't call
set_gdbarch_deprecated_register_byte. Do call set_gdbarch_return_value
instead of set_gdbarch_deprecated_use_struct_convention,
set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
or set_gdbarch_deprecated_extract_struct_value_address.
* alphafbsd-tdep.c (alphafbsd_return_in_memory): Rename from
alphafbsd_use_struct_convention, remove gcc_p argument.
(alphafbsd_init_abi): Set tdep->return_in_memory instead of
set_gdbarch_deprecated_use_struct_convention.
2006-07-09 Mark Kettenis <kettenis@gnu.org>
* alphabsd-tdep.h (alphanbsd_regset_from_core_section): New
prototype.
* alphanbsd-tdep.c (alphanbsd_regset_from_core_section): Handle
a.out-style core file format here. Make global.
(alphanbsd_regset_from_core_section): Remove.
(alphanbsd_sigtramp_offset): Make static.
(alphanbsd_aout_init_abi): Remove.
(alphanbsd_core_osabi_sniffer): Return GDB_OSABI_NETBSD_ELF for
a.out style core files.
(_initialize_alphanbsd_tdep): Do not register a handler for
GDB_OSABI_NETBSD_AOUT.
* alphabsd-tdep.h: Tweak comments.
(SIZEOF_STRUCT_REG, SIZEOF_STRUCT_FPREG): Remove.
* alphanbsd-tdep.c: Reorder includes. Include "regset.h".
(ALPHANBSD_SIZEOF_GREGS, ALPHANBSD_SIZEOF_FPREGS): New defines.
(alphanbsd_supply_fpregset, alphanbsd_supply_gregset)
(alphanbsd_aout_supply_gregset): New functions.
(alphanbsd_gregset, alphanbsd_fpregset, alphanbsd_aout_gregset):
New variables.
(alphanbsd_regset_from_core_section)
(alphanbsd_aout_regset_from_core_section): New functions.
(fetch_core_registers, fetch_elfcore_registers): Remove functions.
(alphanbsd_core_fns, alphanbsd_elf_fns): Remove variables.
(alphanbsd_init_abi): Set regset_from_core_section.
(alphanbsd_aout_init_abi, alphanbsd_core_osabi_sniffer): New
functions.
(_initialize_alphanbsd_tdep): Register NetBSD core file sniffer.
Use alphanbsd_aout_init_abi whre appropriate. Don't call
deprecated_add_core_fns.
* Makefile.in (alphanbsd-tdep.o): Update dependencies.
* alphabsd-tdep.c (alphabsd_supply_reg, alphabsd_fill_reg)
(alphabsd_supply_fpreg, alphabsd_fill_fpreg): Add missing spaces.
* alphanbsd-tdep.c (alphanbsd_init_abi): Use
svr4_lp64_fetch_link_map_offsets instead of
nbsd_lp64_solib_svr4_fetch_link_map_offsets.
2006-07-06 Andrew Stubbs <andrew.stubbs@st.com>
* parse.c (write_exp_elt_opcode, write_exp_elt_sym, write_exp_elt_block
write_exp_elt_longcst, write_exp_elt_dblcst, write_exp_elt_type,
write_exp_elt_intern): Zero initialize tmp.
2006-07-05 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_xfer_partial): Remove KOD support.
* target.h (enum target_object): Remove TARGET_OBJECT_KOD.
* MAINTAINERS: Move Kernel Object Display entry to past maintainers.
* Makefile.in (SFILES, kod_h, COMMON_OBS, kod.o, kod-cisco.o):
Remove KOD support.
* mi/mi-cmds.c (mi_cmds): Remove dummy KOD commands.
* NEWS: Mention KOD.
* kod.h, kod.c, kod-cisco.c: Delete files.
2006-07-04 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (init_remote_state): Use xrealloc instead of xmalloc.
2006-07-03 Nathan J. Williams <nathanw@wasabisystems.com>
* bsd-kvm.c (bsd_kvm_open): Open the KVM interface read-write if
write_files is set.
2006-06-24 Eli Zaretskii <eliz@gnu.org>
* defs.h (DIRNAME_SEPARATOR) [!__CYGWIN__ && _WIN32]: Define to `;'.
2006-06-23 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (arm_register_type): Use unsigned types for registers.
Add special types for sp and pc.
* Makefile.in (arm-tdep.o): Update.
2006-06-22 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_escape_output): New function.
(remote_write_bytes): Use remote_escape_output.
2006-06-21 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention qSupported.
* remote.c (struct remote_state): Add explicit_packet_size.
(get_remote_packet_size): Check explicit_packet_size.
(get_memory_packet_size): Likewise.
(PACKET_qSupported): New enum value.
(struct protocol_feature, remote_supported_packet)
(remote_packet_size, remote_protocol_features)
(remote_query_supported): New.
(remote_open_1): Reset explicit_packet_size. Call
remote_query_supported.
(_initialize_remote): Register qSupported.
2006-06-21 Andrew Stubbs <andrew.stubbs@st.com>
* cli/cli-script.c (realloc_body_list): Zero new parts of body_list.
2006-06-20 Joel Brobecker <brobecker@adacore.com>
* GDB 6.5 released from GDB 6.5 branch.
2006-06-19 Michael Snyder <msnyder@redhat.com>
* mips-tdep.c (mips_eabi_push_dummy_call): For 32 bit ABI, to
decide how many registers it takes to pass a floating point
argument, what matters is the size of a floating point register
(not the size of a general purpose register).
(mips_o32_push_dummy_call): Ditto.
2006-06-19 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
* configure.tgt: Add gdbserver support for m32r-linux.
2006-06-18 Mark Kettenis <kettenis@gnu.org>
* m68klinux-tdep.c (m68k_linux_init_abi): Fix typo in comment.
2006-06-15 Daniel Jacobowitz <dan@codesourcery.com>
* infrun.c (insert_step_resume_breakpoint_at_caller): New function,
based on insert_step_resume_breakpoint_at_frame.
(handle_inferior_event): Update comments. Use
insert_step_resume_breakpoint_at_caller.
(insert_step_resume_breakpoint_at_frame): Revise comments.
2006-06-14 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_unspecified_type): New function.
(read_type_die): Handle DW_TAG_unspecified_type.
(Committed by Julian Brown.)
2006-06-13 Daniel Jacobowitz <dan@codesourcery.com>
* symfile.c (load_command): Check for a changed executable before
"load".
2006-06-13 Fred Fish <fnf@specifix.com>
* mips-tdep.c (mips_find_long_section): New function.
(mips_gdbarch_init): Use it to set long and pointer sizes.
2006-06-13 Nathan Sidwell <nathan@codesourcery.com>
* remote-file.io.c (remote_fileio_func_system): Treat zero length
string as NULL. Adjust for NULL pointer argument.
* doc/gdb.texinfo (system): Document behaviour with zero length
string.
2006-06-12 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (set_remote_protocol_packet_cmd)
(show_remote_protocol_packet_cmd): New prototypes.
(remote_set_cmdlist, remote_show_cmdlist): Move higher.
(struct packet_config): Make name and title const.
(add_packet_config_cmd): Remove unnecessary arguments.
(_initialize_remote): Update calls.
2006-06-10 Daniel Jacobowitz <dan@codesourcery.com>
* mingw-hdep.c (gdb_select): Always check for NULL fd sets
before calling FD_ISSET. Correct check for exceptfds which
previously tested writefds.
2006-06-09 Daniel Jacobowitz <dan@codesourcery.com>
Julian Brown <julian@codesourcery.com>
* dwarf2read.c (partial_read_comp_unit_head): Accept version 3.
2006-06-09 Julian Brown <julian@codesourcery.com>
* MAINTAINERS (Write After Approval): Add myself.
2006-06-08 Michael Snyder <msnyder@redhat.com>
* mips-tdep.c (fp_register_arg_p): Recognize floating point typedefs.
2006-06-08 Nathan Sidwell <nathan@codesourcery.com>
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): New.
(m68k_gdbarch_init): Set it for dwarf & dwarf2 reg number
conversion. Use M68K_NUM_REGS for number of regs.
* remote-fileio.c (remote_fileio_reset): New.
* remote-fileio.h (remote_fileio_reset): Prototype.
* remote.c (extended_remote_restart, remote_open_1): Call it.
* remote.c (remote_open_1): Do preopen tasks before
irreversably destroying state.
2006-06-08 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (struct remote_state): New type, only containing
buf and buf_size.
(remote_state): New variable.
(get_remote_state): New function.
(struct remote_arch_state): Renamed from struct remote_state.
Removed buf and buf_size.
(get_remote_arch_state): Renamed from get_remote_state. All
necessary callers updated to call this function.
(init_remote_state): Initialize the architecture-specific state.
Update the target-specific state if necessary.
(get_remote_packet_size): New function. All previous references
changed to use this accessor function.
(packet_reg_from_regnum, packet_reg_from_pnum): Take a
remote_arch_state instead of a remote_state. All callers changed.
(_initialize_remote): Initialize the packet buffer here.
2006-06-06 Nathan Sidwell <nathan@codesourcery.com>
* remote.c (remote_insert_watchpoint): Return -1, rather than
fatal error if packet is disabled.
(remote_remove_watchpoint, remote_insert_hw_breakpoint,
remote_remove_hw_breakpoint): Likewise.
2006-06-02 Nick Roberts <nickrob@snap.net.nz>
* breakpoint.c (print_it_typical): Use EXEC_ASYNC_LOCATION_REACHED.
2006-05-31 Michael Snyder <msnyder@redhat.com>
* mips-tdep.c: Comment tweaks.
2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (top_builddir): Update comments.
(INTL_DIR, INTL_SRC): Delete.
(INTL, INTL_DEPS, INTL_CFLAGS): Update.
* acinclude.m4: Include new gettext macros.
* configure.ac: Use ZW_GNU_GETTEXT_SISTER_DIR. Remove copied
CATALOGS code.
* aclocal.m4, configure: Regenerated.
2006-05-30 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (arm-linux-nat.o): Update dependencies.
* arm-linux-nat.c: Include "gdb_proc_service.h".
(PTRACE_GET_THREAD_AREA): Define.
(ps_get_thread_area): New function.
2006-05-28 Alexandre Oliva <aoliva@redhat.com>
* dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add
DWARF2_FRAME_REG_SAVED_VAL_OFFSET and
DWARF2_FRAME_REG_SAVED_VAL_EXP.
* dwarf2-frame.c (execute_cfa_program): Handle val_offset,
val_offset_sf and val_expression.
(dwarf2_frame_prev_register): Handle the new reg rules.
(dwarf2_frame_this_id): Use pc instead of function entry point.
2006-05-28 Alexandre Oliva <aoliva@redhat.com>
* dwarf2-frame.c (struct dwarf2_cie): Add signal_frame field.
(dwarf2_frame_sniffer): Use it.
(decode_frame_entry_1): Set it according to augmentation "S".
2006-05-27 Joel Brobecker <brobecker@adacore.com>
From Peter Schauer <peterschauer@gmx.net>
* m2-typeprint.c (m2_record_fields): Move variable declarations
to the begining of the block.
2006-05-23 Mark Mitchell <mark@codesourcery.com>
* mt-tdep.c (mt_register_name): Correct out-of-range logic to
include additional registers.
* mt-tdep.c (mt_gdb_regnums): Add ZI2, ZQ2, Ichannel2,
Iscramb2, Qscramb2, Qchannel2.
(mt_register_name): Likewise.
(mt_copro_register_type): Describe ZI2 and ZQ2.
* mt-tdep.c (mt_gdb_regnums): Define
MT_COPRO_PSEUDOREG_MAC_REGNUM.
(mt_register_name): Use it.
(mt_copro_register_type): Likewise.
(mt_register_type): Likewise.
(mt_pseudo_register_read): Likewise. Read the MAC register, not
the coprocessor register.
(mt_pseudo_register_write): Likewise.
2006-05-21 Christopher Faylor <cgf@timesys.com>
* win32-nat.c (cygwin_exceptions): New variable.
(handle_exception): Treat a cygwin exception like a normal exception if
cygwin_exceptions is true.
(_initialize_win32_nat): Add "set cygwin-exceptions" handler.
2006-05-20 Gaius Mulley <gaius@glam.ac.uk>
* NEWS: (Improved Modula-2 language support): New section.
2006-05-19 Joel Brobecker <brobecker@adacore.com>
* configure: Regenerate using proper version of autoconf.
2006-05-19 Fred Fish <fnf@specifix.com>
* Makefile.in: Fix spelling of 'explicitly' and 'explicit'.
* dwarfread.c: Fix spelling of 'unexpected'.
* mips-tdep.c: Fix spelling of 'possible' and 'Determine'.
* stack.c: Fix spelling of 'RETURN_VALUE'.
2006-05-18 Paul Gilliam <pgilliam@us.ibm.com
* solib-svr4.c (enable_break): Breakup a long line into 3 shorter ones.
2006-05-17 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2-frame.c: Include "value.h".
(read_reg): Use unpack_long and register_type.
* Makefile.in (dwarf2-frame.o): Update.
2006-05-17 Daniel Jacobowitz <dan@codesourcery.com>
* remote-rdp.c: Deleted.
* NEWS: Mention removal of remote-rdp.c.
* Makefile.in (ALLDEPFILES): Remove remote-rdp.c.
(remote-rdp.o): Delete.
* README: Remove description of remote-rdp.c.
* arm-tdep.c (arm_breakpoint_from_pc): Remove obsolete comment.
* config/arm/embed.mt (TDEPFILES): Remove remote-rdp.o.
2006-05-16 Daniel Jacobowitz <dan@codesourcery.com>
* ser-e7kpc.c: Include <time.h> if it is available.
2006-05-16 Joel Brobecker <brobecker@adacore.com>
* version.in (version.in): Bump version number to 6.5.50 now
that the gdb-6.5 branch has been created.
* NEWS: Create a new section for changes that are included
since gdb-6.5. Name the "since gdb-6.4" section as the "in gdb-6.5"
section.
2006-05-16 Jim Blandy <jimb@codesourcery.com>
* MAINTAINERS (Authorized Committers): Gaius Mulley has accepted
the Global Maintainers' invitation to be an authorized committer
for the Modula-2 support.
2006-05-15 Mark Kettenis <kettenis@gnu.org>
* ppcobsd-nat.c: Include "gdb_assert.h".
[PT_GETFPREGS] (getfpregs_supplies): New function.
(ppcobsd_fetch_registers, ppcobsd_fetch_registers): Hanlde OS
versions that have PT_GETFPREGS.
(_initialize_ppcobsd_nat) [PT_GETFPREGS]: Initialize
ppcobsd_fpreg_offsets.
* ppcobsd-tdep.h (ppcobsd_fpreg_offsets, ppcobsd_fpregset):
Declare.
* ppcobsd-tdep.c (ppcobsd_fpreg_offsets, ppcobsd_fpregset): New
variables.
(_initialize_ppcobsd_tdep): Initialize ppcobsd_fpreg_offsets.
* Makefile.in (ppcobsd-nat.o): Update dependencies.
2006-05-15 Daniel Jacobowitz <dan@codesourcery.com>
* configure.ac: Use GCC_HEADER_STDINT.
* acinclude.m4: Include stdint.m4.
* Makefile.in (gdb_stdint_h): Define.
(distclean): Remove gdb_stdint.h.
(Makefile, stamp-h): Update rules to generate only the correct
files.
(gdb_stdint.h, stamp-int): New rules.
* config.in, configure: Regenerated.
2006-05-15 Daniel Jacobowitz <dan@codesourcery.com>
* valprint.c: Include "exceptions.h".
(val_print): If something goes wrong while printing, supply an
error message.
2006-05-15 Peter O'Gorman <gdb-patches@mlists.thewrittenword.com>
* source.c (get_current_source_symtab_and_line)
(set_current_source_symtab_and_line): Use { 0 }.
* cli/cli-cmds.c (list_command): Likewise.
2006-05-14 Nick Roberts <nickrob@snap.net.nz>
* mi/gdb-mi.el (gdbmi-send): Correct regexp for repeat commands.
(gdbmi): Use new variable name gdb-pc-address.
(gdbmi-frame-handler): Use new variable name gdb-pc-address.
Check that a match has been found.
2006-05-13 Gaius Mulley <gaius@glam.ac.uk>
* m2-lang.h: Added function extern prototypes for
m2_is_long_set and get_long_set_bounds.
* m2-typeprint.c: Complete replacement.
(m2_print_type): Walk the Modula-2 type tree.
(m2_type_name): New function.
(m2_range): New function.
(m2_typedef): New function.
(m2_array): New function.
(m2_pointer): New function.
(m2_ref): New function.
(m2_unknown): New function.
(m2_union): New function.
(m2_procedure): New function.
(m2_print_bounds): New function.
(m2_short_set): New function.
(m2_is_long_set): New function.
(m2_get_discrete_bounds): New function.
(m2_is_long_set_of_type): New function.
(m2_long_set): New function.
(m2_record_fields): New function.
(m2_enum): New function.
* dwarf2read.c: Modified.
(read_set_type): New function.
(process_die): Call read_set_type.
(read_base_type): Modifed.
(set_cu_language): Added Modula-2 case clause.
* m2-valprint.c: Complete replacement.
(print_function_pointer_address): New function.
(get_long_set_bounds): New function.
(m2_print_long_set): New function.
(print_unpacked_pointer): New function.
(print_variable_at_address): New function.
(m2_val_print): Replaced.
* gdb/MAINTAINERS (Write After Approval): Added
Gaius Mulley <gaius@glam.ac.uk>
2006-05-12 Mark Kettenis <kettenis@gnu.org>
* ppcnbsd-tdep.h: Update copyright year. Include <stddef.h>
(ppcnbsd_supply_reg, ppcnbsd_fill_reg, ppcnbsd_supply_fpreg)
(ppcnbsd_fill_fpreg): Remove prototypes.
(struct regset): Add forward declaration.
(ppcnbsd_gregset, ppcnbsd_fpregset): Extern declarations.
* ppcnbsd-tdep.c: Update copyright year. Include "gdbtypes.h",
"regset.h" and "gdb_string.h". Don't include "breakpoint.h",
"value.h", target.h and nbsd-tdep.h". Reorder includes.
(REG_FIXREG_OFFSET, REG_LR_OFFSET, REG_CR_OFFSET, REG_XER_OFFSET)
(REG_CTR_OFFSET, REG_PC_OFFSET, SIZEOF_STRUCT_REG)
(FPREG_FPR_OFFSET, FPREG_FPSCR_OFFSET, SIZEOF_STRUCT_FPREG):
Remove macros.
(ppcnbsd_supply_reg, ppcnbsd_fill_reg, ppcnbsd_supply_fpreg)
(ppcnbsd_fill_fpreg): Remove functions.
(fetch_core_registers, fetch_elfcore_registers): Remove functions.
(ppcnbsd_core_fns, ppcnbsd_elfcore_fns): Remove variables.
(ppcnbsd_reg_offsets): New variable.
(ppcnbsd_gregset, ppcnbsd_fpregset): New variables.
(ppcnbsd_sigtramp_cache_init): Deal with new signal trampoline
introduced in NetBSD 2.0.
(ppcnbsd_sigtramp): Provide complete signal trampoline.
(ppcnbsd2_sigtramp): New variable.
(ppcnbsd_init_abi): Set svr4_fetch_link_map_offsets to
svr4_ilp32_fetch_link_map_offsets. Set regset_from_core_section.
Add ppcnbs2_sigtramp unwinder.
(_initialize_ppcnbsd_tdep): Don't use deprecated_add_core_fns.
Initialize ppcnbsd_reg_offsets.
* ppcnbsd-nat.c: Update copyright year. Reorder includes.
(getregs_supplies): Use regnum instead of regno.
(getfpregs_supplies): Likewise.
(ppcnbsd_fetch_inferior_registers): Likewise. Call
ppc_supply_gregset and ppc_suppply_fpregset instead of
ppcnbsd_supply_reg and ppcnbsd_supply_fpreg
(ppcnbsd_store_inferior_registers): Likewise. Call
ppc_collect_gregset and ppc_collect_fpregset instead of
ppcnbsd_fill_reg and ppcnbsd_fill_fpreg.
(ppcnbsd_supply_pcb): Use `gdb_byte *' instead of `char *'.
(_initialize_ppcnbsd_nat): Add some whitespace.
* Makefile.in (ppcnbsd-nat.o, ppcnbsd-tdep.o): Update dependencies.
* config/powerpc/nbsd.mh (NATDEPFILES): Remove infptrace.o.
(NAT_FILE): Remove.
* config/powerpc/nbsd.mt (TDEPFILES): Remove nbsd-tdep.o.
2006-05-11 Alfred M. Szmidt <ams@gnu.org>
* gnu-nat.c (inf_validate_procs): Don't use lvalue in assignments.
2006-05-11 Fred Fish <fnf@specifix.com>
* symtab.c (skip_prologue_using_sal): Handle single line functions
like "foo(){}", which may optimize down to a single return inst.
2006-05-10 Steve Ellcey <sje@cup.hp.com>
* hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Remove
message.
2006-05-09 Andreas Schwab <schwab@suse.de>
* dwarf2-frame.c (struct dwarf2_fde): Add eh_frame_p.
(execute_cfa_program): Add parameter eh_frame_p. Call
dwarf2_frame_eh_frame_regnum when true.
(dwarf2_frame_cache): Pass eh_frame_p from fde to
execute_cfa_program.
(decode_frame_entry_1): Call dwarf2_frame_eh_frame_regnum when
processing .eh_frame. Copy eh_frame_p to the new fde.
(struct dwarf2_frame_ops): Add eh_frame_regnum.
(dwarf2_frame_set_eh_frame_regnum): Define.
(dwarf2_frame_eh_frame_regnum): Define.
* dwarf2-frame.h (dwarf2_frame_set_eh_frame_regnum): Declare.
(dwarf2_frame_eh_frame_regnum): Declare.
2006-05-06 David S. Miller <davem@sunset.davemloft.net>
* linux-nat.c (linux_nat_do_thread_registers): Check for
NULL collect_regset method.
2006-05-06 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (s390_collect_regset): New function.
(s390_gregset, s390x_gregset, s390_fpregset): Add it.
2006-05-06 Nick Roberts <nickrob@snap.net.nz>
* dwarf2read.c: Make LOC_OPTIMIZED_OUT the default value for a
symbol.
2006-05-05 Ulrich Weigand <uweigand@de.ibm.com>
* linux-nat.c (exit_lwp): Fix NULL pointer access.
(linux_nat_handle_extended): New parameter STOPPING.
(wait_lwp): Call it with STOPPING equals 1.
(linux_nat_wait): Call it with STOPPING equals 0.
2006-05-05 Ulrich Weigand <uweigand@de.ibm.com>
* linux-nat.c (linux_nat_wait): Do not short-cut reporting
of 'uninteresting' signals when single-stepping.
2006-05-05 Daniel Jacobowitz <dan@codesourcery.com>
* MAINTAINERS: Move NEWS to the documentation entry.
2006-05-05 David S. Miller <davem@sunset.davemloft.net>
* linux-nat.c (linux_nat_do_thread_registers): Use the
regset_from_core_section infrastructure if the target
supports it.
* Makefile.in: Update dependencies.
* linux-thread-db.c (thread_db_store_registers): Use
regcache_raw_collect.
2006-05-05: Paul Gilliam <pgilliam@us.ibm.com>
* ppc-linux-nat.c: Clean up types for ptrace.
Replace (CORE_ADDR) with (uintptr_t) to avoid the size difference
between a CORE_ADDR and a void* on ppc64 systems compiled for 32-bits.
2006-05-05 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_disconnect): Add TARGET argument.
* target.c (debug_to_disconnect): Delete.
(update_current_target): Do not inherit to_disconnect.
(target_disconnect): Search for a target to implement to_disconnect.
(setup_target_debug): Do not reference to_disconnect.
* target.h (struct target_ops): Add target argument to
to_disconnect.
2006-05-06 Fred Fish <fnf@specifix.com>
* mips-tdep.c (mips_o64_push_dummy_call): Left shift big endian
structs or unions independent of ABI register size.
2006-05-06 Fred Fish <fnf@specifix.com>
* mips-tdep.c (mips_o64_return_value): Replace stub that always
returned RETURN_VALUE_STRUCT_CONVENTION with a real function.
2006-05-05 Daniel Jacobowitz <dan@codesourcery.com>
* mi/mi-main.c (captured_mi_execute_command): Check the return
value of -interpreter-exec.
2006-05-03 Vladimir Prus <ghost@cs.msu.su>
* varobj.c (c_value_of_variable): Ignore top-level references.
(Committed by Jim Blandy.)
2006-04-30 Mark Kettenis <kettenis@gnu.org>
* breakpoint.c (insert_single_step_breakpoint): Make a failure to
insert a single-step breakpoint an error instead of a warning.
2006-05-01 Nathan J. Williams <nathanw@wasabisystems.com>
* ppcnbsd-tdep.c (ppcnbsd_return_value): Change type of last two
arguments from void * to gdb_byte *.
2006-04-26 Michael Snyder <msnyder@redhat.com>
* linux-fork.c (_initialize_linux_fork): Rename "delete-fork"
command to "delete fork" (no hyphen), compatible with other
"delete" commands.
(info_forks_command): Accept a fork ID argument, for info
on a single fork. Report if no matching forks.
2006-04-25 Mark Kettenis <kettenis@gnu.org>
* breakpoint.c (remove_single_step_breakpoints): Bail out early if
no breakpoints are inserted.
From Masaki MURANAKA <monaka@monami-software.com>:
* mips-mdebug-tdep.c (mips_mdebug_frame_prev_register): Change
type of last argument to `gdb_byte *'
2006-04-25 Jim Blandy <jimb@codesourcery.com>
Add support for 'target remote |' on MinGW.
* ser-mingw.c (struct pipe_state): New structure.
(make_pipe_state, free_pipe_state, cleanup_pipe_state)
(pipe_windows_open, pipe_windows_close, pipe_windows_read)
(pipe_windows_write, pipe_wait_handle): New functions.
(_initialize_ser_windows): Register a "pipe" interface based on
them.
2006-04-24 Daniel Jacobowitz <dan@codesourcery.com>
* ser-mingw.c: Include <conio.h>.
(struct ser_console_state, struct net_windows_state): Add exit_select,
have_stopped, thread.
(pipe_select_thread, console_select_thread)
(net_windows_select_thread): Don't create a local state copy or
close stop_select. Exit on exit_select instead of stop_select. Set
have_stopped.
(console_select_thread): Don't report control keypresses as pending
input.
(pipe_select_thread): Allow stop_select to interrupt sleeping.
(set_console_wait_handle): Create exit_select and have_stopped.
Save the thread handle. Check _kbhit before starting a thread.
(ser_console_done_wait_handle): New.
(ser_console_close): Close new handles. Wait for the thread to
exit.
(new_windows_select_thread): Assert that an event occurred.
(net_windows_wait_handle): Check for pending input before starting
a thread.
(net_windows_done_wait_handle): New.
(net_windows_open): Create exit_select and have_stopped.
Save the thread handle.
(net_windows_close): Close new handles. Wait for the thread to
exit.
(_intiialize_ser_windows): Register done_wait_handle methods.
* serial.c [USE_WIN32API] (serial_done_wait_handle): New.
* serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle.
[USE_WIN32API] (serial_done_wait_handle): New prototype.
* mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
2006-04-23 Andreas Schwab <schwab@suse.de>
* rs6000-tdep.c: Include "reggroups.h" only once.
* Makefile.in (rs6000-tdep.o): Update dependencies.
2006-04-21 Frederic Riss <frederic.riss@st.com>
* dwarf2read.c (dwarf2_start_subfile): Change prototype to accept
compilation directory as last argument.
Always pass comp_dir as second argument to start_subfile and prepend
dirname to the filename when necessary.
Remove now superfluous search for pre-existing subfile.
(dwarf_decode_lines): Pass the compilation directory to
dwarf2_start_subfile.
2006-04-20 Michael Snyder <msnyder@redhat.com>
* 2006-03-22 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* configure.tgt (m32c-*-*): New entry.
* config/m32c/m32c.mt: New file.
* m32c-tdep.c: New file.
* Makefile.in (elf_m32c_h): New variable.
(m32c-tdep.o): New rule.
* NEWS: Mention new target.
* MAINTAINERS: Designate Jim Blandy as responsible maintainer.
2006-04-20 Michael Snyder <msnyder@redhat.com>
* remote.c: Fix spelling error in comment.
2006-04-20 Daniel Jacobowitz <dan@codesourcery.com>
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_prev_register):
Correct type of VALUEP. Reported by Jean-Rene Peulve
<jr.peulve@wanadoo.fr>.
2006-04-19 Masaki Muranaka <monaka@monami-software.com>
* m32r-rom.c: On MinGW, include winsock.h instead of sys/types.h,
netdb.h, netinet/in.h.
(m32r_upload_command); Add calls WSAStartup().
* remote-m32r-sdi.c: On MinGW, include winsock.h instead of
netinet/in.h.
2006-04-18 Daniel Jacobowitz <dan@codesourcery.com>
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
shadow_len.
(insert_bp_location, reattach_breakpoints, remove_breakpoint)
(delete_breakpoint): Update calls to changed methods.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(single_step_breakpoints, insert_single_step_breakpoint)
(remove_single_step_breakpoints): New.
* breakpoint.h (struct bp_target_info): New.
(struct bp_location): Replace shadow_contents with
target_info and overlay_target_info.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(insert_single_step_breakpoint, remove_single_step_breakpoints): New
prototypes.
* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
(memory_insert_breakpoint, memory_remove_breakpoint): Update second
argument.
* mem-break.c (default_memory_insert_breakpoint): Update. Set
placed_address, placed_size, and shadow_len.
(default_memory_remove_breakpoint): Update. Don't use
BREAKPOINT_FROM_PC.
(memory_insert_breakpoint, memory_remove_breakpoint): Update.
* target.c (update_current_target): Update prototypes for changed
functions.
(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
Update.
* target.h: Forward declare struct bp_target_info.
(struct target_ops): Use a bp_target_info argument for
to_insert_breakpoint, to_remove_breakpoint,
to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
(target_insert_breakpoint, target_remove_breakpoint)
(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
(memory_insert_breakpoint, memory_remove_breakpoint)
(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
Update.
* config/i386/nm-i386.h: Forward declare struct bp_target_info.
(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* alpha-tdep.c (alpha_software_single_step): Use
insert_single_step_breakpoint and remove_single_step_breakpoints.
Remove unused statics.
* arm-tdep.c (arm_software_single_step): Likewise. Add a note.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* wince.c (struct thread_info_struct): Remove step_prev.
(undoSStep): Use remove_single_step_breakpoints.
(wince_software_single_step): Use insert_single_step_breakpoint.
* corelow.c (ignore): Remove unneeded prototype. Update arguments.
* exec.c (ignore): Likewise.
* sol-thread.c (ignore): Likewise.
* procfs.c (dbx_link_shadow_contents): Delete.
(dbx_link_bpt): New.
(procfs_mourn_inferior): Remove it if necessary.
(remove_dbx_link_breakpoint): Use it.
(insert_dbx_link_bpt_in_file): Set it.
(procfs_init_inferior): Don't update dbx_link_bpt_addr.
* rs6000-nat.c (exec_one_dummy_insn): Use
deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
(base_breakpoint): New.
(disable_break): Use it.
(enable_break): Set it.
* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
Likewise. Remove unnecessary prototypes. Use placed_address
and placed_size. Removed useless read from memory.
* nto-procfs.c (procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint): Update.
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint)
(m32r_remove_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint)
(mips_remove_breakpoint): Likewise.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Likewise.
(rdp_step): Use deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
Update.
* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
Delete.
(init_gdbsim_ops): Use memory_insert_breakpoint and
memory_remove_breakpoint.
* remote-st.c (st2000_insert_breakpoint)
(st2000_remove_breakpoint): Update. Remove unused
BREAKPOINT_FROM_PC.
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
Update. Use placed_address and placed_size.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
2006-04-12 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (extended_remote_restart): Pass the correct length
to getpkt.
2006-04-11 Jim Blandy <jimb@codesourcery.com>
* serial.c (serial_open): Check for special cases at the front of
the "device" name before scanning for the ':' that would indicate
an IP-based connection.
2006-04-10 Christopher Faylor <cgf@timesys.com>
* win32-nat.c (open_symbol_file_object): New function.
(in_dynsym_resolve_code): Ditto.
(init_win32_ops): Fill in fields which ought not to be NULL.
2006-04-10 Christopher Faylor <cgf@timesys.com>
* win32-nat.c (do_win32_fetch_inferior_registers): Don't do anything
with saved context if __COPY_CONTEXT_SIZE is not defined.
(handle_output_debug_string): Ditto.
2006-04-10 Daniel Jacobowitz <dan@codesourcery.com>
* arm-linux-tdep.c (arm_linux_extract_return_value): Use gdb_byte.
2006-04-09 David S. Miller <davem@sunset.davemloft.net>
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Append dwarf2
frame sniffer.
* sparc-tdep.c (sparc32_gdbarch_init): Make sure to call
dwarf2_frame_set_init_reg() before gdbarch_init_osabi() so
that the latter can override.
* Makefile.in (sparc64-linux-tdep.o): Update dependencies.
2006-04-09 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (struct s390_prologue_data): New field 'stack'.
(s390_store): Call pv_area_store to track stack slots.
(s390_load): Call pv_area_fetch to track stack slots.
(s390_check_for_saved): New function.
(s390_analyze_prologue): Call pv_area_scan. Allocate and free stack.
2006-04-09 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (s390-tdep.o): Add dependency on $(prologue_value_h).
* s390-tdep.c: Include "prologue-value.h".
(struct prologue_value): Remove.
(pv_set_to_unknown, pv_set_to_constant, pv_set_to_register,
pv_constant_last, pv_add, pv_add_constant, pv_subtract,
pv_logical_and, pv_is_identical, pv_is_register): Remove.
(compute_x_addr): Remove, replace by ...
(s390_addr): ... this new function.
(struct s390_prologue_data): Use pv_t instead of prologue_value.
(s390_store, s390_load): Likewise.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_analyze_prologue): Likewise. Also, simplify and combine
several conditional statements.
2006-04-08 Jim Blandy <jimb@codesourcery.com>
* Makefile.in (COMMON_OBS): List prologue-value.o. (Omitted from
last patch.)
2006-04-08 David S. Miller <davem@sunset.davemloft.net>
* sparc-linux-tdep.c (sparc32_linux_step_trap): New.
(sparc32_linux_init_abi): Hook it into tdep->step_trap.
(sparc32_linux_core_gregset,
sparc32_linux_supply_core_gregset,
sparc32_linux_collect_core_gregset,
sparc32_linux_supply_core_fpregset,
sparc32_linux_collect_core_fpregset): New.
(sparc32_linux_init_abi): Register them with generic sparc
core regset infrastructure.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): New.
(sparc64_linux_init_abi): Hook it into tdep->step_trap.
(sparc64_linux_core_gregset,
sparc64_linux_supply_core_gregset,
sparc64_linux_collect_core_gregset,
sparc64_linux_supply_core_fpregset,
sparc64_linux_collect_core_fpregset): New.
(sparc64_linux_init_abi): Register them with generic sparc
core regset infrastructure.
* Makefile.in: Update dependencies.
2006-04-07 David S. Miller <davem@sunset.davemloft.net>
* linux-nat.c (linux_nat_thread_alive): Handle targets that
do not implement PTRACE_PEEKUSER.
2006-04-07 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_wait): Convert warning to error before
parsing corrupt packets.
2006-04-07 Andrew Stubbs <andrew.stubbs@st.com>
* cli/cli-script.c (struct user_args): Add command field.
(arg_cleanup): Free command string.
(setup_user_args): Copy the command line before relying on it.
2006-04-06 Joel Brobecker <brobecker@adacore.com>
* breakpoint.c (_initialize_breakpoint): Add "del" as an alias
of the "delete" command.
2006-04-06 Randolph Chung <tausq@debian.org>
* MAINTAINERS (Patch champions): Add myself.
2006-04-05 Andreas Schwab <schwab@suse.de>
* Makefile.in: Update dependencies.
2006-04-05 David S. Miller <davem@sunset.davemloft.net>
* sparc-tdep.c (sparc32_dwarf2_frame_init_reg): New.
(sparc32_gdbarch_init): Pass it to dwarf2_frame_set_init_reg.
* Makefile.in (sparc-tdep.o): Update dependencies.
* sparc-linux-tdep.c (sparc32_linux_sigframe_init): Pull register
window out of the correct stack frame.
* sparc64-linux-tdep.c (sparc64_linux_sigframe_init): Likewise.
* dwarf2-frame.c (dwarf2_frame_ops init_reg): Add "next_frame"
argument.
(dwarf2_frame_default_init_reg): Likewise.
(dwarf2_frame_set_init_reg): Update init_reg arg.
(dwarf2_frame_init_reg): Take "next_frame" and pass it to
ops->init_reg().
(dwarf2_frame_cache): Pass next_frame to dwarf2_frame_init_reg.
* dwarf2-frame.h (dwarf2-frame_set_init_reg): Update declaration.
* cris-tdep.c (cris_dwarf2_frame_init_reg): Add next_frame arg.
* s390-tdep.c (s390_dwarf2_frame_init_reg): Likewise.
* sh-tdep.c (sh_dwarf2_frame_init_reg): Likewise.
* sparc64-tdep.c (sparc64_dwarf2_frame_init_reg): Likewise.
* sparc-tdep.c (sparc32_struct_return_from_sym): New function.
(sparc32_frame_cache): Call it.
(sparc32_dwarf2_struct_return_p): New function.
(sparc_dwarf2_frame_init_reg): Use it to determine if the function
returns a structure and thus we have to indicate the return PC and
NPC are 4 bytes later than usual.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Append
dwarf2 frame sniffer.
* Makefile.in (sparc-linux-tdep.o): Update dependencies.
2006-04-04 David S. Miller <davem@davemloft.net>
* config/linux.mh (NATDEPFILES): Remove sparc-sol2-nat.o
* config/linux64.h (NATDEPFILES): Likewise
* sparc-linux-nat.c (supply_gregset, supply_fpregset, fill_gregset,
fill_fpregset): New.
* sparc64-linux-nat.c (supply_gregset, supply_fpregset, fill_gregset,
fill_fpregset): New.
* Makefile.in (sparc-linux-nat.o, sparc64-linux-nat.o): Update for
new includes.
2006-04-04 Andreas Schwab <schwab@suse.de>
* Makefile.in (elf_common_h): Define.
2006-04-03 Andrew Stubbs <andrew.stubbs@st.com>
* sh-tdep.c (sh_dwarf2_frame_init_reg): New function.
(sh_gdbarch_init): Call dwarf2_frame_set_init_reg().
2006-03-31 Andrew Stubbs <andrew.stubbs@st.com>
* value.h (struct internalvar): Add field 'endian'.
* value.c (lookup_internalvar): Initialise endian.
(value_of_internalvar): Flip the endian of built-in types if required.
(set_internalvar): Set the endian.
(show_convenience): Access the value through value_of_internalvar().
2006-03-30 Vladimir Prus <ghost@cs.msu.su>
* remote.c (watchpoint_to_Z_packet): Use values of Z_packet_type enum
instead of hardcoded integer literals.
2006-03-30 Daniel Jacobowitz <dan@codesourcery.com>
* cli/cli-script.c (insert_args): Handle NULL user_args.
2006-03-30 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (thumb_scan_prologue): Don't try to analyze
the function at zero if we have no symbols.
2006-03-30 Adrien Kunysz <a_kunysz@yahoo.com>
* i386-stub.c (getpacket): Fix array overflow.
* m32r-stub.c (getpacket): Likewise.
* m68k-stub.c (getpacket): Likewise.
* sh-stub.c (getpacket): Likewise.
* sparc-stub.c (getpacket): Likewise.
2006-03-30 Daniel Jacobowitz <dan@codesourcery.com>
* frame.h (set_current_sal_from_frame): New prototype.
* stack.c (set_current_sal_from_frame): Make global.
* infrun.c (normal_stop): Call set_current_sal_from_frame.
2006-03-30 Daniel Jacobowitz <dan@codesourcery.com>
* linux-thread-db.c: Include "linux-nat.h".
(check_for_thread_db): New function, split out from
thread_db_new_objfile. Remove dead check for active
thread_db on inapplicable targets.
(thread_db_new_objfile): Call check_for_thread_db.
* Makefile.in (linux-thread-db.o): Update.
* linux-nat.c (child_post_attach): Call check_for_thread_db.
(linux_child_post_startup_inferior): Likewise.
(lin_lwp_attach_lwp): Call target_post_attach instead of
child_post_attach.
* linux-nat.h (check_for_thread_db): New prototype.
2006-03-30 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (struct remote_state): Add BUF and BUF_SIZE.
(init_remote_state): Initialize the new fields.
(get_memory_packet_size): Update BUF and BUF_SIZE if necessary.
(set_thread, remote_thread_alive, remote_unpack_thread_info_response)
(remote_get_threadinfo, parse_threadlist_response)
(remote_get_threadlist, remote_current_thread, remote_threads_info)
(remote_threads_extra_info, extended_remote_restart, get_offsets)
(remote_check_symbols, remote_open_1, remote_detach)
(remove_vcont_probe, remote_vcont_resume, remote_resume)
(remote_wait, remote_async_wait, fetch_register_using_p)
(remote_fetch_registers, store_register_using_P)
(remote_store_registers, check_binary_download, remote_write_bytes)
(remote_read_bytes, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_remove_watchpoint, remote_insert_hw_breakpoint)
(remote_remove_hw_breakpoint, compare_sections_command)
(remote_xfer_partial, remote_rcmd, packet_command)
(remote_get_thread_local_address): Use the global incoming buffer
instead of alloca or xmalloc. Limit outgoing packets to
rs->remote_packet_size and incoming packets to rs->buf_size.
Update calls to getpkt and remote_send.
(remote_send): Take arguments by reference.
(putpkt_binary): Eliminate junkbuf. Use skip_frame.
(skip_frame): New function.
(read_frame): Take arguments by reference. Expand the packet
buffer instead of issuing an error.
(getpkt, getpkt_sane): Take arguments by reference.
* remote.h (getpkt): Update prototype and doc.
* tracepoint.c (remote_get_noisy_reply): Take arguments by
reference.
(target_buf): Change from array to pointer.
(target_buf_size): New variable.
(remote_set_transparent_ranges): Update call to getpkt.
(trace_start_command, trace_stop_command, trace_status_command):
Update calls to remote_get_noisy_reply.
(finish_tfind_command): Take arguments by reference.
(trace_find_command, trace_find_pc_command)
(trace_find_tracepoint_command, trace_find_line_command):
(trace_find_range_command, trace_find_outside_command): Update
calls to finish_tfind_command.
(_initialize_tracepoint): Initialize target_buf_size and target_buf.
2005-03-30 Randolph Chung <tausq@debian.org>
* hppa-linux-tdep.c: Include regset.h.
(GR_REGNUM, TR_REGNUM, greg_map): New.
(hppa_linux_supply_regset, hppa_linux_supply_fpregset): New.
(hppa_linux_regset, hppa_linux_fpregset): New.
(hppa_linux_regset_from_core_section): New.
(hppa_linux_init_abi): Set regset_from_core_section.
(_initialize_hppa_linux_tdep): Register osabi handler for
64-bit Linux.
* Makefile.in (hppa-linux-tdep.o): Update dependencies.
* config/pa/linux.mh: Stop using core-regset.o
2006-03-30 Randolph Chung <tausq@debian.org>
* hppa-tdep.c (hppa_find_unwind_entry_in_block): New.
(hppa_frame_cache): Use new function to find unwind entry.
(hppa_frame_this_id): Likewise.
(hppa_frame_unwind_sniffer): Likewise.
2006-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention the removal of NLM.
2006-03-29 Steve Ellcey <sje@cup.hp.com>
* Makefile.in (nlm): Remove target.
* configure.tgt (i[34567]86-*-netware*): Do not set build_nlm.
* configure.ac: Remove AC_CONFIG_SUBDIRS of nlm.
* configure: Regenerate.
* doc/gdb.texinfo: Remove gdbserve.nlm documentation.
* nlm: Remove directory.
2006-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (utils.o): Update.
* top.c (in_user_command): New.
(command_line_input): Use input_from_terminal_p.
(input_from_terminal_p): Don't check caution. Handle
stdin == NULL for Insight.
* top.h (in_user_command, caution): New declarations.
* utils.c: Include "top.h".
(query, defaulted_query): Check caution here. Move the call
to input_from_terminal_p higher.
* cli/cli-script.c (do_restore_user_call_depth): Only decrement
the depth. Update in_user_command if necessary.
(execute_user_command): Don't clobber old_chain. Set
in_user_command. Let do_restore_user_call_depth handle
user_call_depth.
(read_command_lines): Check whether to prompt before calling
Insight hooks.
* tui/tui-hooks.c (tui_query_hook): Remove newly unnecessary
input_from_terminal_p check.
2006-03-29 Ulrich Weigand <uweigand@de.ibm.com>
* s390-nat.c (s390_insert_watchpoint): Add missing argument.
(s390_remove_watchpoint): Likewise.
2006-03-28 Jim Blandy <jimb@codesourcery.com>
* prologue-value.c, prologue-value.h: New files.
* Makefile.in (prologue_value_h): New variable.
(HFILES_NO_SRCDIR): List prologue-value.h.
(SFILES): List prologue-value.c.
(COMMON_OBS): List prologue-value.o.
(prologue-value.o): New rule.
2006-03-27 Michael Snyder <msnyder@redhat.com>
* xstormy16-tdep.c (xstormy16_return_value, xstormy16_push_dummy_call,
xstormy16_pointer_to_address, xstormy16_address_to_pointer,
xstormy16_frame_prev_register): Change void* to gdb_byte*.
(xstormy16_push_dummy_call): Add block-local char* val,
to avoid type conflict with outer scope variable.
2006-03-27 Andrew Stubbs <andrew.stubbs@st.com>
* sh-tdep.c (sh_gdbarch_init): Add missing architectures.
2006-03-27 Nick Roberts <nickrob@snap.net.nz>
PR mi/1429
* varobj.c (c_name_of_child, c_value_of_child): Allow non-zero
offsets for languages like Fortran.
2006-03-26 Randolph Chung <tausq@debian.org>
* config/pa/hppa64.mt: Use HPUX version of the tm file.
2006-03-25 Nick Roberts <nickrob@snap.net.nz>
* mi/gdb-mi.el (gdbmi-send): Improve regexp to repeat commands.
Try to deal with continuation line.
(gdbmi, gdbmi-prompt1, gud-gdbmi-marker-filter): Update to new
variable names.
(gdb-break-list-regexp, gdb-stack-list-frames-regexp):
Future proof against new fields being added to MI output.
(gdbmi-prompt2, gdb-break-list-handler,gdb-get-source-file)
(gdbmi-frame-handler): Update to new variable name
gdb-get-buffer-create.
(gdbmi-frame-handler): Use hollow-right-triangle for all selected
frames which except the innermost (where execution has stopped).
2006-03-24 Randolph Chung <tausq@debian.org>
* solib-som.c (link_map_start): Don't error out if there is
not yet a link map.
2006-03-24 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (linux_ops_saved): New.
(super_mourn_inferior, kill_inferior, threaded, linux_nat_ops)
(child_mourn_inferior, child_wait, linux_nat_create_inferior)
(linux_nat_fetch_registers, linux_nat_store_registers)
(linux_nat_child_post_startup_inferior, init_linux_nat_ops): Delete.
(init_lwp_list): Don't set threaded.
(add_lwp): Don't modify threaded.
(delete_lwp): Don't mention non-threaded mode.
(linux_nat_switch_fork): New.
(linux_nat_attach): Update inferior_ptid.
(linux_nat_wait): Handle num_lwps == 0 at entry. Don't check
threaded flag.
(linux_nat_kill): Handle pending forks and saved forks.
(linux_nat_mourn_inferior): Handle saved forks.
(linux_nat_pid_to_str): Don't use the LWP form when there is
only one thread.
(linux_target): Don't set to_wait, to_kill, or to_mourn_inferior.
(linux_nat_add_target): New.
(_initialize_linux_nat): Don't initialize the linux native target
here.
* linux-nat.h (linux_nat_add_target, linux_nat_switch_fork): New
prototypes.
* linux-fork.c: Include "linux-nat.h".
(add_fork): Update initial PID.
(fork_load_infrun_state): Call linux_nat_switch_fork.
* Makefile.in (linux-fork.o): Update.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
linux_nat_add_target instead of add_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Likewise.
* arm-linux-nat.c (_initialize_arm_linux_nat): Likewise.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Likewise.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Likewise.
* i386-linux-nat.c (_initialize_i386_linux_nat): Likewise.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Likewise.
* m68klinux-nat.c (_initialize_m68k_linux_nat): Likewise.
* mips-linux-nat.c (_initialize_mips_linux_nat): Likewise.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Likewise.
* s390-nat.c (_initialize_s390_nat): Likewise.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Likewise.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Likewise.
2006-03-24 Daniel Jacobowitz <dan@codesourcery.com>
* linux-fork.c: Include "gdb_assert.h".
(fork_load_infrun_state): Set inferior_ptid and stop_pc here.
Update the register cache and selected frame also.
(linux_fork_mourn_inferior): Use fork_load_infrun_state. Return
to single fork mode if necessary.
(linux_fork_context): Remove bits handled by fork_load_infrun_state.
* Makefile.in (linux_fork_h): New.
(linux-fork.o, linux-nat.o): Update.
2006-03-23 Andreas Schwab <schwab@suse.de>
* config/s390/s390.mh (NATDEPFILES): Add linux-fork.o.
2006-03-18 Jim Blandy <jimb@codesourcery.com>
* symtab.h (enum address_class): Doc fix.
2006-03-16 Michael Snyder <msnyder@redhat.com>
* tracepoint.c (tracepoint_save_command): Fix typo in error msg.
* target.c (push_target): Fix typo in comment.
* remote.c (remote_watch_data_address): Fix typo in comment.
* i386-tdep.c (i386_push_dummy_call): Fix typo in comment.
2006-03-15 Kevin Buettner <kevinb@redhat.com>
* frv-linux-tdep.c (gdbcore.h, regcache.h, regset.h, gdb_string.h):
Include.
(FRV_ELF_NGREG, FRV_PT_PSR, FRV_PT_ISR, FRV_PT_CCR, FRV_PT_CCCR)
(FRV_PT_LR, FRV_PT_LCR, FRV_PT_PC, FRV_PT_GNER0, FRV_PT_GNER1)
(FRV_PT_IACC0H, FRV_PT_IACC0L, FRV_PT_GR, FRV_PT_TBR)
(FRV_PT_EXEC_FDPIC_LOADMAP, FRV_PT_INTERP_FDPIC_LOADMAP): Define.
(frv_elf_greg_t, frv_elf_gregset_t, frv_elf_fpreg_t)
(frv_elf_fpregset_t): Define types.
(frv_linux_supply_gregset, frv_linux_supply_fpregset)
(frv_linux_regset_from_core_section: New functions.
(frv_linux_gregset, frv_linux_fpregset): New static globals.
(frv_linux_init_abi): Register the `regset_from_core_section' method.
* Makefile.in (frv-linux-tdep.o): Update dependencies.
* solib-frv.c (frv_current_sos): Relocate main executable after
loading core file.
(frv_clear_solib): Clean up space associated with
`main_executable_lm_info'.
* config/frv/frv.mt (TDEPFILES): Add corelow.o to this list.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (mips_linux_tdep_h): New.
(mpis-linux-nat.o, mips-linux-tdep.o): Update.
* mips-linux-nat.c: Include "inferior.h", "mips-linux-tdep.h", and
<sys/ptrace.h>.
(have_ptrace_regsets, super_fetch_registers, super_store_registers)
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers, mips64_linux_fetch_registers)
(mips64_linux_store_registers): New.
(_initialize_mips_linux_nat): Override to_fetch_registers and
to_store_registers.
* mips-linux-tdep.h: New file.
* mips-linux-tdep.c: Include "mips-linux-tdep.c".
(ELF_NGREG, ELF_NFPREG, elf_greg_t, elf_gregset_t, elf_fpreg_t)
(elf_fpregset_t, FPR_BASE, PC, CAUSE, BADVADDR, MMHI, MMLO)
(FPC_CSR, FPC_EIR, EF_REG0, EF_REG31, EF_LO, EF_HI, EF_CP0_EPC)
(EF_CP0_BADVADDR, EF_CP0_STATUS, EF_CP0_CAUSE, EF_SIZE)
(MIPS64_ELF_NGREG, MIPS64_ELF_NFPREG, mips64_elf_greg_t)
(mips64_elf_gregset_t, mips64_elf_fpreg_t, mips64_elf_fpregset_t)
(MIPS64_FPR_BASE, MIPS64_PC, MIPS64_CAUSE, MIPS64_BADVADDR)
(MIPS64_MMHI, MIPS64_MMLO, MIPS64_FPC_CSR, MIPS64_FPC_EIR)
(MIPS64_EF_REG0, MIPS64_EF_REG31, MIPS64_EF_LO, MIPS64_EF_HI)
(MIPS64_EF_CP0_EPC, MIPS64_EF_CP0_BADVADDR, MIPS64_EF_CP0_STATUS)
(MIPS64_EF_CP0_CAUSE, MIPS64_EF_SIZE): Delete.
(supply_32bit_reg): Use gdb_byte.
(supply_64bit_reg): New.
(mips_supply_gregset, mips_fill_gregset, mips_supply_fpregset)
(mips_fill_fpregset, fetch_core_registers, supply_gregset)
(fill_gregset, supply_fpregset): Update for renamed types.
(mips64_supply_gregset): Use gdb_byte and supply_64bit_reg.
(mips64_fill_gregset): Make global. Handle 32-bit register
sizes.
(mips64_fill_fpregset): Make global. Use gdb_byte. Handle
FP regsets properly.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-linux-tdep.c (mips_supply_gregset): Renamed from supply_gregset.
(mips_fill_gregset): Renamed from fill_gregset.
(mips_supply_fpregset): Renamed from supply_fpregset.
(mips_fill_fpregset): Renamed from fill_fpregset.
(fetch_core_registers): Update calls.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): New
functions.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-tdep.c (mips_gdbarch_init): Default 64-bit ELF files to N64.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-tdep.c (is_mips16_addr, mips32_next_pc, add_offset_16):
Correct arithmetic for 64-bit CORE_ADDR.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-linux-tdep.c: Include "floatformat.h".
(mips_linux_init_abi): Use 128-bit long double for N32 and N64.
* mips-tdep.c (mips_n32n64_return_value): Support 128-bit long
double.
(print_gp_register_row): Don't print spaces before ignored
or floating point registers.
* Makefile.in (mips-linux-tdep.o): Update.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-mdebug-tdep.c (compare_pdr_entries): Use bfd_get_signed_32
for code addresses.
(non_heuristic_proc_desc): Likewise.
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-linux-nat.c: Include "gdb_proc_service.h".
(PTRACE_GET_THREAD_AREA): Define.
(ps_get_thread_area): New.
* Makefile.in (mips-linux-nat.o): Update.
2006-03-13 Jim Blandy <jimb@codesourcery.com>
* MAINTAINERS: Use my work address.
2006-03-09 Michael Snyder <msnyder@redhat.com>
* linux-nat.c (kill_inferior): Just call target_mourn_inferior
instead of getting tricky for the multi-fork case.
* linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid
for each fork, and then use init_fork_list to delete them.
2006-03-08 Alexandre Oliva <aoliva@redhat.com>
* solib-svr4.c (svr4_current_sos): Move up initialization of
l_addr, such that it clearly covers all cases.
2006-03-08 Andreas Schwab <schwab@suse.de>
* ia64-tdep.c (ia64_libunwind_frame_this_id): Adapt use of
libunwind_frame_prev_register to use a gdb_byte buffer and
extract_unsigned_integer.
(ia64_libunwind_sigtramp_frame_prev_register): Likewise.
* libunwind-frame.c (libunwind_frame_prev_register): Change type
of last argument to `gdb_byte *'
* libunwind-frame.h: Adjust declaration.
2006-03-08 Paul Brook <paul@codesourcery.com>
* arm-tdep.c (arm_push_dummy_call): Remove stack alignment.
(arm_frame_align): New function.
(arm_gdbarch_init): Use it.
2006-03-03 Khem Raj <khem@mvista.com>
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Use gdb_byte.
Committed by Andrew Cagney.
2006-03-02 Corinna Vinschen <vinschen@redhat.com>
* mn10300-tdep.c (mn10300_push_dummy_call): Write breakpoint
address to MDR register.
2006-03-01 Daniel Jacobowitz <dan@codesourcery.com>
* gdbtypes.c (lookup_struct_elt_type): Correct noerr for recursive
calls.
2006-03-01 Randolph Chung <tausq@debian.org>
* somread.c (som_symfile_read): Update comment and remove unneeded
use of a deprecated variable.
2006-03-01 Randolph Chung <tausq@debian.org>
* hppa-tdep.h (unwind_table_entry): Update field names to match HP
runtime specification.
* hppa-tdep.c (internalize_unwinds, hppa_frame_cache): Likewise.
(unwind_command): Likewise.
2006-03-01 Randolph Chung <tausq@debian.org>
* hppa-tdep.c (hppa_frame_cache): Handle Region_Description and
Pseudo_SP_Set in unwind record.
2006-03-01 Randolph Chung <tausq@debian.org>
* hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Use
TDEP->is_elf to determine if we are working with a SOM binary.
(null_symtab_and_line): Remove unused variable.
* config/pa/hppa64.mt: Use tm-hppa.h.
* config/pa/tm-hppa64.h: Remove file.
2006-03-01 Wu Zhou <woodzltc@cn.ibm.com>
* f-typeprint.c (f_type_print_base): Delete the redundant space.
2006-02-28 Kevin Buettner <kevinb@redhat.com>
* Makefile.in (mn10300-linux-tdep.o): Update dependencies.
* mn10300-linux-tdep.c (frame.h, trad-frame.h, tramp-frame.h):
Include.
(am33_linux_sigframe_cache_init): New function.
(am33_linux_sigframe, am33_linux_rt_sigframe): New signal frame
descriptions.
(AM33_SIGCONTEXT_D0, AM33_SIGCONTEXT_D1, AM33_SIGCONTEXT_D2)
(AM33_SIGCONTEXT_D3, AM33_SIGCONTEXT_A0, AM33_SIGCONTEXT_A1)
(AM33_SIGCONTEXT_A2, AM33_SIGCONTEXT_A3, AM33_SIGCONTEXT_E0)
(AM33_SIGCONTEXT_E1, AM33_SIGCONTEXT_E2, AM33_SIGCONTEXT_E3)
(AM33_SIGCONTEXT_E4, AM33_SIGCONTEXT_E5, AM33_SIGCONTEXT_E6)
(AM33_SIGCONTEXT_E7, AM33_SIGCONTEXT_LAR, AM33_SIGCONTEXT_LIR)
(AM33_SIGCONTEXT_MDR, AM33_SIGCONTEXT_MCVF, AM33_SIGCONTEXT_MCRL)
(AM33_SIGCONTEXT_MCRH, AM33_SIGCONTEXT_MDRQ, AM33_SIGCONTEXT_SP)
(AM33_SIGCONTEXT_EPSW, AM33_SIGCONTEXT_PC, AM33_SIGCONTEXT_FPUCONTEXT):
New constants.
(am33_linux_init_osabi): Register signal frame unwinders.
2006-02-28 Kevin Buettner <kevinb@redhat.com>
* mn10300-tdep.c (mn10300_analyze_prologue): Implement backtrack
out of pattern match by saving relevant state. Fix stack size
adjustment bug.
2006-02-28 Alexandre Oliva <aoliva@redhat.com>
* solib-svr4.h (struct link_map_offsets): Add l_ld_offset and
l_ld_size fields.
* solib-svr4.c (struct lm_info): Add l_addr field.
(LM_ADDR_FROM_LINK_MAP): Renamed from LM_ADDR.
(HAS_LM_DYNAMIC_FROM_LINK_MAP): New.
(LM_DYNAMIC_FROM_LINK_MAP): New.
(LM_ADDR_CHECK): New. Use it instead of LM_ADDR.
(svr4_current_sos): Initialize l_addr. Adjust.
(svr4_relocate_section_addresses): Adjust.
(svr4_ilp32_fetch_link_map_offsets): Define new members.
(svr4_lp64_fetch_link_map_offsets): Likewise.
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Likewise.
(mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
* Makefile.in (solib-svr4.o): Depend on $(elf_bfd_h).
2006-02-26 David S. Miller <davem@sunset.davemloft.net>
* config/sparc/linux.mt (TDEPFILES): Add sol2-tdep.o.
* config/sparc/linux64.mt (TDEPFILES): Likewise.
2006-02-27 Alan Modra <amodra@bigpond.net.au>
* ppc-linux-nat.c (ppc_linux_insert_watchpoint): Correct return type.
(ppc_linux_remove_watchpoint): Likewise, and args.
2006-02-26 Mark Kettenis <kettenis@gnu.org>
* i386obsd-tdep.c (i386obsd_trapframe_sniffer): Also recognize
"soft" interrupts.
2006-02-24 Charles Wilson <cygwin@cwilson.fastmail.fm>
* gdb/defs.h: unconditionally include <fcntl.h>, and
ensure that O_BINARY is defined.
* gdb/solib.c(solib_open): ensure solib files are opened in
binary mode.
* gdb/corelow.c: Remove O_BINARY macro definition.
* gdb/exec.c: Remove O_BINARY macro definition
* gdb/remote-rdp.c: Remove O_BINARY macro definition
* gdb/source.c: Remove O_BINARY macro definition
* gdb/symfile.c: Remove O_BINARY macro definition
2006-02-24 Randolph Chung <tausq@debian.org>
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Initialize
argreg.
* solib-som.c (som_solib_remove_inferior_hook): Remove unused
function.
2006-02-24 Wu Zhou <woodzltc@cn.ibm.com>
* f-exp.y: Symbol '%' is not used as the modulus operator in
Fortran. Delete this from Fortran expression.
It is now used by Fortran 90 and later to access the member
of derived type. Add this into Fortran expression.
* f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT.
Print each elements in the derived type.
* f-typeprint.c (print_equivalent_f77_float_type): Add a parameter
level into the function definition to do indented printing. And
call fprintfi_filtered instead to do indented printing.
(f_type_print_base): Replace fprintf_filtered with the indented
version (fprintfi_filtered).
(f_type_print_base): Call indented print_equivalent_f77_float_type.
(f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print
the definition of the derived type.
2006-02-23 Daniel Jacobowitz <dan@codesourcery.com>
* gdb_curses.h: Provide a fallback prototype for tgetnum.
2006-02-23 Daniel Jacobowitz <dan@codesourcery.com>
* doublest.h: Conditionalize DOUBLEST on PRINTF_HAS_LONG_DOUBLE
also.
(DOUBLEST_FORMAT): Rename to DOUBLEST_PRINT_FORMAT.
(DOUBLEST_SCAN_FORMAT): New.
* ada-lex.l (PRINTF_HAS_LONG_DOUBLE): Remove redefinitions.
(processReal): Use DOUBLEST_SCAN_FORMAT.
* c-exp.y (parse_number): Likewise.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
2006-02-23 Daniel Jacobowitz <dan@codesourcery.com>
* event-top.c (async_do_nothing, async_disconnect)
(async_stop_sig, async_float_handler): Remove duplicated
prototypes.
(handle_sighup): Guard prototype with SIGHUP.
(async_do_nothing): Guard function and prototype with
SIGQUIT || SIGHUP.
(async_disconnect): Guard prototype with SIGHUP.
(async_stop_sig): Guard prototype with STOP_SIGNAL.
2006-02-23 Daniel Jacobowitz <dan@codesourcery.com>
* maint.c (maintenance_dump_me): Remove unnecessary prototype.
2006-02-23 Daniel Jacobowitz <dan@codesourcery.com>
* win32-termcap.c (tputs): Return 0.
2006-02-21 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Introduce ---enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror.
* configure regenerate.
2006-02-21 Daniel Jacobowitz <dan@codesourcery.com>
* elfread.c (elf_symtab_read): Skip symbols which BFD considers
special.
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* defs.h (directory_switch): Add prototype.
* main.c (captured_main): Use directory_switch() instead of
directory_command() to add directories from the -d switch.
* source.c (directory_switch): New function.
(add_path): Use buildargv() to parse spaces in filenames properly.
Strip multiple trailing '/' rather than just one.
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* symfile.c (add_symbol_file_command): Use buildargv(), instead of
hand decoding the command line, to allow use of quotes and spaces.
(_initialize_symfile): Reorganize the help message for add-symbol-file
such that 'help files' shows a better message.
2006-02-21 Andrew Stubbs <andrew.stubbs@st.com>
* sh-tdep.c (sh_generic_show_regs): Reformat both code and output.
(sh3_show_regs, sh2e_show_regs, sh2a_show_regs): Likewise.
(sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs): Likewise.
(sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Likewise.
2006-02-20 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (lin_thread_get_thread_signals): Default to __SIGRTMIN
and __SIGRTMIN + 1.
2006-02-20 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c: Add an enumeration for configurable remote
packets.
(remote_protocol_packets, set_remote_protocol_packet_cmd)
(show_remote_protocol_packet_cmd): New.
(remote_protocol_vcont)
(set_remote_protocol_vcont_packet_cmd)
(show_remote_protocol_vcont_packet_cmd)
(remote_protocol_qSymbol)
(set_remote_protocol_qSymbol_packet_cmd)
(show_remote_protocol_qSymbol_packet_cmd)
(remote_protocol_P, set_remote_protocol_P_packet_cmd)
(show_remote_protocol_P_packet_cmd)
(remote_protocol_Z)
(set_remote_protocol_Z_software_bp_packet_cmd)
(show_remote_protocol_Z_software_bp_packet_cmd)
(set_remote_protocol_Z_hardware_bp_packet_cmd)
(show_remote_protocol_Z_hardware_bp_packet_cmd)
(set_remote_protocol_Z_write_wp_packet_cmd)
(show_remote_protocol_Z_write_wp_packet_cmd)
(set_remote_protocol_Z_read_wp_packet_cmd)
(show_remote_protocol_Z_read_wp_packet_cmd)
(set_remote_protocol_Z_access_wp_packet_cmd)
(show_remote_protocol_Z_access_wp_packet_cmd)
(remote_protocol_binary_download)
(set_remote_protocol_binary_download_cmd)
(show_remote_protocol_binary_download_cmd)
(remote_protocol_qPart_auxv)
(set_remote_protocol_qPart_auxv_packet_cmd)
(show_remote_protocol_qPart_auxv_packet_cmd)
(remote_protocol_qGetTLSAddr)
(set_remote_protocol_qGetTLSAddr_packet_cmd)
(show_remote_protocol_qGetTLSAddr_packet_cmd)
(remote_protocol_p)
(set_remote_protocol_p_packet_cmd)
(show_remote_protocol_p_packet_cmd): Delete.
(init_all_packet_configs): Simplify.
(set_remote_protocol_Z_packet_cmd)
(show_remote_protocol_Z_packet_cmd)
(remote_check_symbols, remote_vcont_probe, remote_vcont_resume)
(remote_fetch_registers, remote_prepare_to_store)
(remote_store_registers, check_binary_download)
(remote_write_bytes, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_remove_watchpoint, remote_insert_hw_breakpoint)
(remote_remove_hw_breakpoint, remote_xfer_partial)
(remote_get_thread_local_address): Update for packet array.
(_initialize_remote): Likewise; also update for common
set/show commands.
2006-02-20 Daniel Jacobowitz <dan@codesourcery.com>
* symfile.c (place_section): Correct retry logic.
2006-02-19 Christopher Faylor <cgf@timesys.com>
* win32_nat.c (cygwin_load_start): New variable.
(cygwin_load_end): Ditto.
(have_saved_context): Ditto.
(saved_context): Ditto.
(max_dll_name_len): Delete obsolete variable.
(do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll
if we are in a cygwin signal rather than a windows signal.
(solib_symbols_add): Detect and store beginning and end of cygwin DLL
if dll being loaded is the cygwin DLL.
(register_loaded_dll): Remove calculation of max_dll_name_len.
(win32_clear_solib): Ditto.
(handle_load_dll): Delete obsolete variable. Remove unneeded call to
solib_add.
(handle_output_debug_string): Detect and store signal information sent
by Cygwin here.
(handle_exception): Silently pass on errors in the cygwin DLL. Return
-1 on first pass exception.
(win32_continue): Remove spurious clearing of continue_status.
(get_win32_debug_event): Deal differently first chance exception.
2006-02-19 Randolph Chung <tausq@debian.org>
* hppa-tdep.c (hppa_in_solib_call_trampoline): Only use if no
unwind entry.
2006-02-16 Fred Fish <fnf@specifix.com>
* eval.c (evaluate_subexp_standard): For OP_TYPE, return
a non lval value zero, of the appropriate type, when avoiding
side effects.
* typeprint.c (ptype_eval): Remove function and declaration.
(ptype_command): Simplify to just a call to whatis_exp.
2006-02-15 Paul Brook <paul@codesourcery.com>
* arm-tdep.c (arm_skip_prologue, thumb_get_next_pc, arm_get_next_pc):
Load insn opcodes as unsigned values.
2006-02-14 Alexandre Oliva <aoliva@redhat.com>
* doublest.h (DOUBLEST): Use long double only if we can scan
it in. Undefine HAVE_LONG_DOUBLE otherwise.
(DOUBLEST_FORMAT): New.
* c-exp.y (parse_number): Use it.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* varobj.c (free_variable): Silence type-punning warnings.
* tui/tui-data.h (struct tui_list): Change type of list member.
* tui/tui-data.c: Remove no-longer-needed type casts.
(source_windows): Silence type-punning warnings.
* tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise.
2006-02-13 Mark Kettenis <kettenis@gnu.org>
Fix PR breakpoints/2080.
* i386-tdep.c (struct i386_frame_cache): Add stack_align member.
(i386_analyze_stack_align): New function.
(i386_analyze_prologue): Use i386_analyze_stack_align.
(i386_frame_cache): Deal with stack realignment.
2006-02-14 Nick Roberts <nickrob@snap.net.nz>
* mi/gdb-mi.el: Use more functions from gdb-ui.el.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui
2006-02-10 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention native Windows support.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call ini