| /* MI Command Set - breakpoint and watchpoint commands. |
| Copyright (C) 2000, 2001, 2002, 2007, 2008, 2009, 2010 |
| Free Software Foundation, Inc. |
| Contributed by Cygnus Solutions (a Red Hat company). |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "defs.h" |
| #include "arch-utils.h" |
| #include "mi-cmds.h" |
| #include "ui-out.h" |
| #include "mi-out.h" |
| #include "breakpoint.h" |
| #include "gdb_string.h" |
| #include "mi-getopt.h" |
| #include "gdb.h" |
| #include "exceptions.h" |
| #include "observer.h" |
| |
| enum |
| { |
| FROM_TTY = 0 |
| }; |
| |
| /* True if MI breakpoint observers have been registered. */ |
| |
| static int mi_breakpoint_observers_installed; |
| |
| /* Control whether breakpoint_notify may act. */ |
| |
| static int mi_can_breakpoint_notify; |
| |
| /* Output a single breakpoint, when allowed. */ |
| |
| static void |
| breakpoint_notify (int b) |
| { |
| if (mi_can_breakpoint_notify) |
| gdb_breakpoint_query (uiout, b, NULL); |
| } |
| |
| enum bp_type |
| { |
| REG_BP, |
| HW_BP, |
| REGEXP_BP |
| }; |
| |
| /* Implements the -break-insert command. |
| See the MI manual for the list of possible options. */ |
| |
| void |
| mi_cmd_break_insert (char *command, char **argv, int argc) |
| { |
| char *address = NULL; |
| int hardware = 0; |
| int temp_p = 0; |
| int thread = -1; |
| int ignore_count = 0; |
| char *condition = NULL; |
| int pending = 0; |
| int enabled = 1; |
| int tracepoint = 0; |
| struct cleanup *back_to; |
| enum bptype type_wanted; |
| |
| enum opt |
| { |
| HARDWARE_OPT, TEMP_OPT, CONDITION_OPT, |
| IGNORE_COUNT_OPT, THREAD_OPT, PENDING_OPT, DISABLE_OPT, |
| TRACEPOINT_OPT, |
| }; |
| static struct mi_opt opts[] = |
| { |
| {"h", HARDWARE_OPT, 0}, |
| {"t", TEMP_OPT, 0}, |
| {"c", CONDITION_OPT, 1}, |
| {"i", IGNORE_COUNT_OPT, 1}, |
| {"p", THREAD_OPT, 1}, |
| {"f", PENDING_OPT, 0}, |
| {"d", DISABLE_OPT, 0}, |
| {"a", TRACEPOINT_OPT, 0}, |
| { 0, 0, 0 } |
| }; |
| |
| /* Parse arguments. It could be -r or -h or -t, <location> or ``--'' |
| to denote the end of the option list. */ |
| int optind = 0; |
| char *optarg; |
| |
| while (1) |
| { |
| int opt = mi_getopt ("mi_cmd_break_insert", argc, argv, opts, &optind, &optarg); |
| if (opt < 0) |
| break; |
| switch ((enum opt) opt) |
| { |
| case TEMP_OPT: |
| temp_p = 1; |
| break; |
| case HARDWARE_OPT: |
| hardware = 1; |
| break; |
| case CONDITION_OPT: |
| condition = optarg; |
| break; |
| case IGNORE_COUNT_OPT: |
| ignore_count = atol (optarg); |
| break; |
| case THREAD_OPT: |
| thread = atol (optarg); |
| break; |
| case PENDING_OPT: |
| pending = 1; |
| break; |
| case DISABLE_OPT: |
| enabled = 0; |
| break; |
| case TRACEPOINT_OPT: |
| tracepoint = 1; |
| break; |
| } |
| } |
| |
| if (optind >= argc) |
| error (_("mi_cmd_break_insert: Missing <location>")); |
| if (optind < argc - 1) |
| error (_("mi_cmd_break_insert: Garbage following <location>")); |
| address = argv[optind]; |
| |
| /* Now we have what we need, let's insert the breakpoint! */ |
| if (! mi_breakpoint_observers_installed) |
| { |
| observer_attach_breakpoint_created (breakpoint_notify); |
| observer_attach_breakpoint_modified (breakpoint_notify); |
| observer_attach_breakpoint_deleted (breakpoint_notify); |
| mi_breakpoint_observers_installed = 1; |
| } |
| |
| back_to = make_cleanup_restore_integer (&mi_can_breakpoint_notify); |
| mi_can_breakpoint_notify = 1; |
| |
| /* Note that to request a fast tracepoint, the client uses the |
| "hardware" flag, although there's nothing of hardware related to |
| fast tracepoints -- one can implement slow tracepoints with |
| hardware breakpoints, but fast tracepoints are always software. |
| "fast" is a misnomer, actually, "jump" would be more appropriate. |
| A simulator or an emulator could conceivably implement fast |
| regular non-jump based tracepoints. */ |
| type_wanted = (tracepoint |
| ? (hardware ? bp_fast_tracepoint : bp_tracepoint) |
| : (hardware ? bp_hardware_breakpoint : bp_breakpoint)); |
| |
| create_breakpoint (get_current_arch (), address, condition, thread, |
| 0 /* condition and thread are valid. */, |
| temp_p, type_wanted, |
| ignore_count, |
| pending ? AUTO_BOOLEAN_TRUE : AUTO_BOOLEAN_FALSE, |
| NULL, 0, enabled, 0); |
| do_cleanups (back_to); |
| |
| } |
| |
| enum wp_type |
| { |
| REG_WP, |
| READ_WP, |
| ACCESS_WP |
| }; |
| |
| void |
| mi_cmd_break_passcount (char *command, char **argv, int argc) |
| { |
| int n; |
| int p; |
| struct breakpoint *t; |
| |
| if (argc != 2) |
| error (_("Usage: tracepoint-number passcount")); |
| |
| n = atoi (argv[0]); |
| p = atoi (argv[1]); |
| t = get_tracepoint (n); |
| |
| if (t) |
| { |
| t->pass_count = p; |
| observer_notify_tracepoint_modified (n); |
| } |
| else |
| { |
| error (_("Cound not find tracepoint %d"), n); |
| } |
| } |
| |
| /* Insert a watchpoint. The type of watchpoint is specified by the |
| first argument: |
| -break-watch <expr> --> insert a regular wp. |
| -break-watch -r <expr> --> insert a read watchpoint. |
| -break-watch -a <expr> --> insert an access wp. */ |
| |
| void |
| mi_cmd_break_watch (char *command, char **argv, int argc) |
| { |
| char *expr = NULL; |
| enum wp_type type = REG_WP; |
| enum opt |
| { |
| READ_OPT, ACCESS_OPT |
| }; |
| static struct mi_opt opts[] = |
| { |
| {"r", READ_OPT, 0}, |
| {"a", ACCESS_OPT, 0}, |
| { 0, 0, 0 } |
| }; |
| |
| /* Parse arguments. */ |
| int optind = 0; |
| char *optarg; |
| |
| while (1) |
| { |
| int opt = mi_getopt ("mi_cmd_break_watch", argc, argv, |
| opts, &optind, &optarg); |
| |
| if (opt < 0) |
| break; |
| switch ((enum opt) opt) |
| { |
| case READ_OPT: |
| type = READ_WP; |
| break; |
| case ACCESS_OPT: |
| type = ACCESS_WP; |
| break; |
| } |
| } |
| if (optind >= argc) |
| error (_("mi_cmd_break_watch: Missing <expression>")); |
| if (optind < argc - 1) |
| error (_("mi_cmd_break_watch: Garbage following <expression>")); |
| expr = argv[optind]; |
| |
| /* Now we have what we need, let's insert the watchpoint! */ |
| switch (type) |
| { |
| case REG_WP: |
| watch_command_wrapper (expr, FROM_TTY, 0); |
| break; |
| case READ_WP: |
| rwatch_command_wrapper (expr, FROM_TTY, 0); |
| break; |
| case ACCESS_WP: |
| awatch_command_wrapper (expr, FROM_TTY, 0); |
| break; |
| default: |
| error (_("mi_cmd_break_watch: Unknown watchpoint type.")); |
| } |
| } |
| |
| /* The mi_read_next_line consults these variable to return successive |
| command lines. While it would be clearer to use a closure pointer, |
| it is not expected that any future code will use read_command_lines_1, |
| therefore no point of overengineering. */ |
| |
| static char **mi_command_line_array; |
| static int mi_command_line_array_cnt; |
| static int mi_command_line_array_ptr; |
| |
| static char * |
| mi_read_next_line (void) |
| { |
| if (mi_command_line_array_ptr == mi_command_line_array_cnt) |
| return NULL; |
| else |
| return mi_command_line_array[mi_command_line_array_ptr++]; |
| } |
| |
| void |
| mi_cmd_break_commands (char *command, char **argv, int argc) |
| { |
| struct command_line *break_command; |
| char *endptr; |
| int bnum; |
| struct breakpoint *b; |
| |
| if (argc < 1) |
| error ("USAGE: %s <BKPT> [<COMMAND> [<COMMAND>...]]", command); |
| |
| bnum = strtol (argv[0], &endptr, 0); |
| if (endptr == argv[0]) |
| error ("breakpoint number argument \"%s\" is not a number.", |
| argv[0]); |
| else if (*endptr != '\0') |
| error ("junk at the end of breakpoint number argument \"%s\".", |
| argv[0]); |
| |
| b = get_breakpoint (bnum); |
| if (b == NULL) |
| error ("breakpoint %d not found.", bnum); |
| |
| mi_command_line_array = argv; |
| mi_command_line_array_ptr = 1; |
| mi_command_line_array_cnt = argc; |
| |
| if (is_tracepoint (b)) |
| break_command = read_command_lines_1 (mi_read_next_line, 1, |
| check_tracepoint_command, b); |
| else |
| break_command = read_command_lines_1 (mi_read_next_line, 1, 0, 0); |
| |
| breakpoint_set_commands (b, break_command); |
| } |
| |