blob: 7004d8dc9a813a2783fa2d6c1f0266072d5c1470 [file] [log] [blame]
/*
* Copyright (C) 2019 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "service_utils.h"
#include <fcntl.h>
#include <grp.h>
#include <map>
#include <sys/mount.h>
#include <sys/prctl.h>
#include <sys/wait.h>
#include <unistd.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android-base/strings.h>
#include <cutils/android_get_control_file.h>
#include <cutils/sockets.h>
#include <processgroup/processgroup.h>
#include "mount_namespace.h"
#include "util.h"
using android::base::GetProperty;
using android::base::StartsWith;
using android::base::StringPrintf;
using android::base::unique_fd;
using android::base::WriteStringToFile;
namespace android {
namespace init {
namespace {
Result<void> EnterNamespace(int nstype, const char* path) {
auto fd = unique_fd{open(path, O_RDONLY | O_CLOEXEC)};
if (fd == -1) {
return ErrnoError() << "Could not open namespace at " << path;
}
if (setns(fd.get(), nstype) == -1) {
return ErrnoError() << "Could not setns() namespace at " << path;
}
return {};
}
Result<void> SetUpMountNamespace(bool remount_proc, bool remount_sys) {
constexpr unsigned int kSafeFlags = MS_NODEV | MS_NOEXEC | MS_NOSUID;
// Recursively remount / as MS_SLAVE like zygote does so that
// unmounting and mounting /proc doesn't interfere with the parent
// namespace's /proc mount. This will also prevent any other
// mounts/unmounts initiated by the service from interfering with the
// parent namespace but will still allow mount events from the parent
// namespace to propagate to the child.
if (mount("rootfs", "/", nullptr, (MS_SLAVE | MS_REC), nullptr) == -1) {
return ErrnoError() << "Could not remount(/) recursively as MS_SLAVE";
}
// umount() then mount() /proc and/or /sys
// Note that it is not sufficient to mount with MS_REMOUNT.
if (remount_proc) {
if (umount("/proc") == -1) {
return ErrnoError() << "Could not umount(/proc)";
}
if (mount("", "/proc", "proc", kSafeFlags, "") == -1) {
return ErrnoError() << "Could not mount(/proc)";
}
}
if (remount_sys) {
if (umount2("/sys", MNT_DETACH) == -1) {
return ErrnoError() << "Could not umount(/sys)";
}
if (mount("", "/sys", "sysfs", kSafeFlags, "") == -1) {
return ErrnoError() << "Could not mount(/sys)";
}
}
return {};
}
Result<void> SetUpPidNamespace(const char* name) {
if (prctl(PR_SET_NAME, name) == -1) {
return ErrnoError() << "Could not set name";
}
pid_t child_pid = fork();
if (child_pid == -1) {
return ErrnoError() << "Could not fork init inside the PID namespace";
}
if (child_pid > 0) {
// So that we exit with the right status.
static int init_exitstatus = 0;
signal(SIGTERM, [](int) { _exit(init_exitstatus); });
pid_t waited_pid;
int status;
while ((waited_pid = wait(&status)) > 0) {
// This loop will end when there are no processes left inside the
// PID namespace or when the init process inside the PID namespace
// gets a signal.
if (waited_pid == child_pid) {
init_exitstatus = status;
}
}
if (!WIFEXITED(init_exitstatus)) {
_exit(EXIT_FAILURE);
}
_exit(WEXITSTATUS(init_exitstatus));
}
return {};
}
void SetupStdio(bool stdio_to_kmsg) {
auto fd = unique_fd{open("/dev/null", O_RDWR | O_CLOEXEC)};
dup2(fd.get(), STDIN_FILENO);
if (stdio_to_kmsg) {
fd.reset(open("/dev/kmsg_debug", O_WRONLY | O_CLOEXEC));
if (fd == -1) fd.reset(open("/dev/null", O_WRONLY | O_CLOEXEC));
}
dup2(fd.get(), STDOUT_FILENO);
dup2(fd.get(), STDERR_FILENO);
}
void OpenConsole(const std::string& console) {
auto fd = unique_fd{open(console.c_str(), O_RDWR | O_CLOEXEC)};
if (fd == -1) fd.reset(open("/dev/null", O_RDWR | O_CLOEXEC));
ioctl(fd.get(), TIOCSCTTY, 0);
dup2(fd.get(), 0);
dup2(fd.get(), 1);
dup2(fd.get(), 2);
}
} // namespace
void Descriptor::Publish() const {
auto published_name = name_;
for (auto& c : published_name) {
c = isalnum(c) ? c : '_';
}
int fd = fd_.get();
// For safety, the FD is created as CLOEXEC, so that must be removed before publishing.
auto fd_flags = fcntl(fd, F_GETFD);
fd_flags &= ~FD_CLOEXEC;
if (fcntl(fd, F_SETFD, fd_flags) != 0) {
PLOG(ERROR) << "Failed to remove CLOEXEC from '" << published_name << "'";
}
std::string val = std::to_string(fd);
setenv(published_name.c_str(), val.c_str(), 1);
}
Result<Descriptor> SocketDescriptor::Create(const std::string& global_context) const {
const auto& socket_context = context.empty() ? global_context : context;
auto result = CreateSocket(name, type | SOCK_CLOEXEC, passcred, listen, perm, uid, gid,
socket_context);
if (!result.ok()) {
return result.error();
}
return Descriptor(ANDROID_SOCKET_ENV_PREFIX + name, unique_fd(*result));
}
Result<Descriptor> FileDescriptor::Create() const {
int flags = (type == "r") ? O_RDONLY : (type == "w") ? O_WRONLY : O_RDWR;
// Make sure we do not block on open (eg: devices can chose to block on carrier detect). Our
// intention is never to delay launch of a service for such a condition. The service can
// perform its own blocking on carrier detect.
unique_fd fd(TEMP_FAILURE_RETRY(open(name.c_str(), flags | O_NONBLOCK | O_CLOEXEC)));
if (fd < 0) {
return ErrnoError() << "Failed to open file '" << name << "'";
}
// Fixup as we set O_NONBLOCK for open, the intent for fd is to block reads.
fcntl(fd.get(), F_SETFL, flags);
return Descriptor(ANDROID_FILE_ENV_PREFIX + name, std::move(fd));
}
Result<void> EnterNamespaces(const NamespaceInfo& info, const std::string& name,
std::optional<MountNamespace> override_mount_namespace) {
for (const auto& [nstype, path] : info.namespaces_to_enter) {
if (auto result = EnterNamespace(nstype, path.c_str()); !result.ok()) {
return result;
}
}
#if defined(__ANDROID__)
if (override_mount_namespace.has_value()) {
if (auto result = SwitchToMountNamespaceIfNeeded(override_mount_namespace.value());
!result.ok()) {
return result;
}
}
#endif
if (info.flags & CLONE_NEWNS) {
bool remount_proc = info.flags & CLONE_NEWPID;
bool remount_sys =
std::any_of(info.namespaces_to_enter.begin(), info.namespaces_to_enter.end(),
[](const auto& entry) { return entry.first == CLONE_NEWNET; });
if (auto result = SetUpMountNamespace(remount_proc, remount_sys); !result.ok()) {
return result;
}
}
if (info.flags & CLONE_NEWPID) {
// This will fork again to run an init process inside the PID namespace.
if (auto result = SetUpPidNamespace(name.c_str()); !result.ok()) {
return result;
}
}
return {};
}
Result<void> SetProcessAttributes(const ProcessAttributes& attr, InterprocessFifo setsid_finished) {
if (attr.ioprio_class != IoSchedClass_NONE) {
if (android_set_ioprio(getpid(), attr.ioprio_class, attr.ioprio_pri)) {
PLOG(ERROR) << "failed to set pid " << getpid() << " ioprio=" << attr.ioprio_class
<< "," << attr.ioprio_pri;
}
}
if (RequiresConsole(attr)) {
setsid();
setsid_finished.Write(kSetSidFinished);
setsid_finished.Close();
OpenConsole(attr.console);
} else {
// Without PID namespaces, this call duplicates the setpgid() call from
// the parent process. With PID namespaces, this setpgid() call sets the
// process group ID for a child of the init process in the PID
// namespace.
if (setpgid(0, 0) == -1) {
return ErrnoError() << "setpgid failed";
}
SetupStdio(attr.stdio_to_kmsg);
}
for (const auto& rlimit : attr.rlimits) {
if (setrlimit(rlimit.first, &rlimit.second) == -1) {
return ErrnoErrorf("setrlimit({}, {{rlim_cur={}, rlim_max={}}}) failed", rlimit.first,
rlimit.second.rlim_cur, rlimit.second.rlim_max);
}
}
if (attr.gid) {
if (setgid(attr.gid) != 0) {
return ErrnoError() << "setgid failed";
}
}
if (setgroups(attr.supp_gids.size(), const_cast<gid_t*>(&attr.supp_gids[0])) != 0) {
return ErrnoError() << "setgroups failed";
}
if (attr.uid) {
if (setuid(attr.uid) != 0) {
return ErrnoError() << "setuid failed";
}
}
if (attr.priority != 0) {
if (setpriority(PRIO_PROCESS, 0, attr.priority) != 0) {
return ErrnoError() << "setpriority failed";
}
}
return {};
}
Result<void> WritePidToFiles(std::vector<std::string>* files) {
if (files->empty()) {
// No files to write pid to, exit early.
return {};
}
if (!CgroupsAvailable()) {
return Error() << "cgroups are not available";
}
// See if there were "writepid" instructions to write to files under cpuset path.
std::string cpuset_path;
if (CgroupGetControllerPath("cpuset", &cpuset_path)) {
auto cpuset_predicate = [&cpuset_path](const std::string& path) {
return StartsWith(path, cpuset_path + "/");
};
auto iter = std::find_if(files->begin(), files->end(), cpuset_predicate);
if (iter == files->end()) {
// There were no "writepid" instructions for cpusets, check if the system default
// cpuset is specified to be used for the process.
std::string default_cpuset = GetProperty("ro.cpuset.default", "");
if (!default_cpuset.empty()) {
// Make sure the cpuset name starts and ends with '/'.
// A single '/' means the 'root' cpuset.
if (default_cpuset.front() != '/') {
default_cpuset.insert(0, 1, '/');
}
if (default_cpuset.back() != '/') {
default_cpuset.push_back('/');
}
files->push_back(
StringPrintf("%s%stasks", cpuset_path.c_str(), default_cpuset.c_str()));
}
}
} else {
LOG(ERROR) << "cpuset cgroup controller is not mounted!";
}
// Issue a warning whenever writepid is being used with a cgroup. This can't be done during
// command parsing because cgroups might not be configured at the time or parsing.
for (const auto& file : *files) {
if (CgroupGetControllerFromPath(file, nullptr)) {
LOG(WARNING) << "writepid usage with cgroups path '" << file
<< "' is obsolete, please use task_profiles!";
}
}
std::string pid_str = std::to_string(getpid());
for (const auto& file : *files) {
if (!WriteStringToFile(pid_str, file)) {
return ErrnoError() << "couldn't write " << pid_str << " to " << file;
}
}
return {};
}
} // namespace init
} // namespace android