| /* |
| * Copyright 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "ScreenRecord" |
| //#define LOG_NDEBUG 0 |
| #include <utils/Log.h> |
| |
| #include <binder/IPCThreadState.h> |
| #include <utils/Errors.h> |
| #include <utils/Thread.h> |
| #include <utils/Timers.h> |
| |
| #include <gui/Surface.h> |
| #include <gui/SurfaceComposerClient.h> |
| #include <gui/ISurfaceComposer.h> |
| #include <ui/DisplayInfo.h> |
| #include <media/openmax/OMX_IVCommon.h> |
| #include <media/stagefright/foundation/ABuffer.h> |
| #include <media/stagefright/foundation/ADebug.h> |
| #include <media/stagefright/foundation/AMessage.h> |
| #include <media/stagefright/MediaCodec.h> |
| #include <media/stagefright/MediaErrors.h> |
| #include <media/stagefright/MediaMuxer.h> |
| #include <media/ICrypto.h> |
| |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <fcntl.h> |
| #include <signal.h> |
| #include <getopt.h> |
| #include <sys/wait.h> |
| |
| using namespace android; |
| |
| static const uint32_t kMinBitRate = 100000; // 0.1Mbps |
| static const uint32_t kMaxBitRate = 100 * 1000000; // 100Mbps |
| static const uint32_t kMaxTimeLimitSec = 180; // 3 minutes |
| static const uint32_t kFallbackWidth = 1280; // 720p |
| static const uint32_t kFallbackHeight = 720; |
| |
| // Command-line parameters. |
| static bool gVerbose = false; // chatty on stdout |
| static bool gRotate = false; // rotate 90 degrees |
| static bool gSizeSpecified = false; // was size explicitly requested? |
| static uint32_t gVideoWidth = 0; // default width+height |
| static uint32_t gVideoHeight = 0; |
| static uint32_t gBitRate = 4000000; // 4Mbps |
| static uint32_t gTimeLimitSec = kMaxTimeLimitSec; |
| |
| // Set by signal handler to stop recording. |
| static bool gStopRequested; |
| |
| // Previous signal handler state, restored after first hit. |
| static struct sigaction gOrigSigactionINT; |
| static struct sigaction gOrigSigactionHUP; |
| |
| |
| /* |
| * Catch keyboard interrupt signals. On receipt, the "stop requested" |
| * flag is raised, and the original handler is restored (so that, if |
| * we get stuck finishing, a second Ctrl-C will kill the process). |
| */ |
| static void signalCatcher(int signum) |
| { |
| gStopRequested = true; |
| switch (signum) { |
| case SIGINT: |
| case SIGHUP: |
| sigaction(SIGINT, &gOrigSigactionINT, NULL); |
| sigaction(SIGHUP, &gOrigSigactionHUP, NULL); |
| break; |
| default: |
| abort(); |
| break; |
| } |
| } |
| |
| /* |
| * Configures signal handlers. The previous handlers are saved. |
| * |
| * If the command is run from an interactive adb shell, we get SIGINT |
| * when Ctrl-C is hit. If we're run from the host, the local adb process |
| * gets the signal, and we get a SIGHUP when the terminal disconnects. |
| */ |
| static status_t configureSignals() |
| { |
| struct sigaction act; |
| memset(&act, 0, sizeof(act)); |
| act.sa_handler = signalCatcher; |
| if (sigaction(SIGINT, &act, &gOrigSigactionINT) != 0) { |
| status_t err = -errno; |
| fprintf(stderr, "Unable to configure SIGINT handler: %s\n", |
| strerror(errno)); |
| return err; |
| } |
| if (sigaction(SIGHUP, &act, &gOrigSigactionHUP) != 0) { |
| status_t err = -errno; |
| fprintf(stderr, "Unable to configure SIGHUP handler: %s\n", |
| strerror(errno)); |
| return err; |
| } |
| return NO_ERROR; |
| } |
| |
| /* |
| * Returns "true" if the device is rotated 90 degrees. |
| */ |
| static bool isDeviceRotated(int orientation) { |
| return orientation != DISPLAY_ORIENTATION_0 && |
| orientation != DISPLAY_ORIENTATION_180; |
| } |
| |
| /* |
| * Configures and starts the MediaCodec encoder. Obtains an input surface |
| * from the codec. |
| */ |
| static status_t prepareEncoder(float displayFps, sp<MediaCodec>* pCodec, |
| sp<IGraphicBufferProducer>* pBufferProducer) { |
| status_t err; |
| |
| if (gVerbose) { |
| printf("Configuring recorder for %dx%d video at %.2fMbps\n", |
| gVideoWidth, gVideoHeight, gBitRate / 1000000.0); |
| } |
| |
| sp<AMessage> format = new AMessage; |
| format->setInt32("width", gVideoWidth); |
| format->setInt32("height", gVideoHeight); |
| format->setString("mime", "video/avc"); |
| format->setInt32("color-format", OMX_COLOR_FormatAndroidOpaque); |
| format->setInt32("bitrate", gBitRate); |
| format->setFloat("frame-rate", displayFps); |
| format->setInt32("i-frame-interval", 10); |
| |
| sp<ALooper> looper = new ALooper; |
| looper->setName("screenrecord_looper"); |
| looper->start(); |
| ALOGV("Creating codec"); |
| sp<MediaCodec> codec = MediaCodec::CreateByType(looper, "video/avc", true); |
| if (codec == NULL) { |
| fprintf(stderr, "ERROR: unable to create video/avc codec instance\n"); |
| return UNKNOWN_ERROR; |
| } |
| err = codec->configure(format, NULL, NULL, |
| MediaCodec::CONFIGURE_FLAG_ENCODE); |
| if (err != NO_ERROR) { |
| codec->release(); |
| codec.clear(); |
| |
| fprintf(stderr, "ERROR: unable to configure codec (err=%d)\n", err); |
| return err; |
| } |
| |
| ALOGV("Creating buffer producer"); |
| sp<IGraphicBufferProducer> bufferProducer; |
| err = codec->createInputSurface(&bufferProducer); |
| if (err != NO_ERROR) { |
| codec->release(); |
| codec.clear(); |
| |
| fprintf(stderr, |
| "ERROR: unable to create encoder input surface (err=%d)\n", err); |
| return err; |
| } |
| |
| ALOGV("Starting codec"); |
| err = codec->start(); |
| if (err != NO_ERROR) { |
| codec->release(); |
| codec.clear(); |
| |
| fprintf(stderr, "ERROR: unable to start codec (err=%d)\n", err); |
| return err; |
| } |
| |
| ALOGV("Codec prepared"); |
| *pCodec = codec; |
| *pBufferProducer = bufferProducer; |
| return 0; |
| } |
| |
| /* |
| * Configures the virtual display. When this completes, virtual display |
| * frames will start being sent to the encoder's surface. |
| */ |
| static status_t prepareVirtualDisplay(const DisplayInfo& mainDpyInfo, |
| const sp<IGraphicBufferProducer>& bufferProducer, |
| sp<IBinder>* pDisplayHandle) { |
| status_t err; |
| |
| // Set the region of the layer stack we're interested in, which in our |
| // case is "all of it". If the app is rotated (so that the width of the |
| // app is based on the height of the display), reverse width/height. |
| bool deviceRotated = isDeviceRotated(mainDpyInfo.orientation); |
| uint32_t sourceWidth, sourceHeight; |
| if (!deviceRotated) { |
| sourceWidth = mainDpyInfo.w; |
| sourceHeight = mainDpyInfo.h; |
| } else { |
| ALOGV("using rotated width/height"); |
| sourceHeight = mainDpyInfo.w; |
| sourceWidth = mainDpyInfo.h; |
| } |
| Rect layerStackRect(sourceWidth, sourceHeight); |
| |
| // We need to preserve the aspect ratio of the display. |
| float displayAspect = (float) sourceHeight / (float) sourceWidth; |
| |
| |
| // Set the way we map the output onto the display surface (which will |
| // be e.g. 1280x720 for a 720p video). The rect is interpreted |
| // post-rotation, so if the display is rotated 90 degrees we need to |
| // "pre-rotate" it by flipping width/height, so that the orientation |
| // adjustment changes it back. |
| // |
| // We might want to encode a portrait display as landscape to use more |
| // of the screen real estate. (If players respect a 90-degree rotation |
| // hint, we can essentially get a 720x1280 video instead of 1280x720.) |
| // In that case, we swap the configured video width/height and then |
| // supply a rotation value to the display projection. |
| uint32_t videoWidth, videoHeight; |
| uint32_t outWidth, outHeight; |
| if (!gRotate) { |
| videoWidth = gVideoWidth; |
| videoHeight = gVideoHeight; |
| } else { |
| videoWidth = gVideoHeight; |
| videoHeight = gVideoWidth; |
| } |
| if (videoHeight > (uint32_t)(videoWidth * displayAspect)) { |
| // limited by narrow width; reduce height |
| outWidth = videoWidth; |
| outHeight = (uint32_t)(videoWidth * displayAspect); |
| } else { |
| // limited by short height; restrict width |
| outHeight = videoHeight; |
| outWidth = (uint32_t)(videoHeight / displayAspect); |
| } |
| uint32_t offX, offY; |
| offX = (videoWidth - outWidth) / 2; |
| offY = (videoHeight - outHeight) / 2; |
| Rect displayRect(offX, offY, offX + outWidth, offY + outHeight); |
| |
| if (gVerbose) { |
| if (gRotate) { |
| printf("Rotated content area is %ux%u at offset x=%d y=%d\n", |
| outHeight, outWidth, offY, offX); |
| } else { |
| printf("Content area is %ux%u at offset x=%d y=%d\n", |
| outWidth, outHeight, offX, offY); |
| } |
| } |
| |
| |
| sp<IBinder> dpy = SurfaceComposerClient::createDisplay( |
| String8("ScreenRecorder"), false /* secure */); |
| |
| SurfaceComposerClient::openGlobalTransaction(); |
| SurfaceComposerClient::setDisplaySurface(dpy, bufferProducer); |
| SurfaceComposerClient::setDisplayProjection(dpy, |
| gRotate ? DISPLAY_ORIENTATION_90 : DISPLAY_ORIENTATION_0, |
| layerStackRect, displayRect); |
| SurfaceComposerClient::setDisplayLayerStack(dpy, 0); // default stack |
| SurfaceComposerClient::closeGlobalTransaction(); |
| |
| *pDisplayHandle = dpy; |
| |
| return NO_ERROR; |
| } |
| |
| /* |
| * Runs the MediaCodec encoder, sending the output to the MediaMuxer. The |
| * input frames are coming from the virtual display as fast as SurfaceFlinger |
| * wants to send them. |
| * |
| * The muxer must *not* have been started before calling. |
| */ |
| static status_t runEncoder(const sp<MediaCodec>& encoder, |
| const sp<MediaMuxer>& muxer) { |
| static int kTimeout = 250000; // be responsive on signal |
| status_t err; |
| ssize_t trackIdx = -1; |
| uint32_t debugNumFrames = 0; |
| int64_t startWhenNsec = systemTime(CLOCK_MONOTONIC); |
| int64_t endWhenNsec = startWhenNsec + seconds_to_nanoseconds(gTimeLimitSec); |
| |
| Vector<sp<ABuffer> > buffers; |
| err = encoder->getOutputBuffers(&buffers); |
| if (err != NO_ERROR) { |
| fprintf(stderr, "Unable to get output buffers (err=%d)\n", err); |
| return err; |
| } |
| |
| // This is set by the signal handler. |
| gStopRequested = false; |
| |
| // Run until we're signaled. |
| while (!gStopRequested) { |
| size_t bufIndex, offset, size; |
| int64_t ptsUsec; |
| uint32_t flags; |
| |
| if (systemTime(CLOCK_MONOTONIC) > endWhenNsec) { |
| if (gVerbose) { |
| printf("Time limit reached\n"); |
| } |
| break; |
| } |
| |
| ALOGV("Calling dequeueOutputBuffer"); |
| err = encoder->dequeueOutputBuffer(&bufIndex, &offset, &size, &ptsUsec, |
| &flags, kTimeout); |
| ALOGV("dequeueOutputBuffer returned %d", err); |
| switch (err) { |
| case NO_ERROR: |
| // got a buffer |
| if ((flags & MediaCodec::BUFFER_FLAG_CODECCONFIG) != 0) { |
| // ignore this -- we passed the CSD into MediaMuxer when |
| // we got the format change notification |
| ALOGV("Got codec config buffer (%u bytes); ignoring", size); |
| size = 0; |
| } |
| if (size != 0) { |
| ALOGV("Got data in buffer %d, size=%d, pts=%lld", |
| bufIndex, size, ptsUsec); |
| CHECK(trackIdx != -1); |
| |
| // If the virtual display isn't providing us with timestamps, |
| // use the current time. |
| if (ptsUsec == 0) { |
| ptsUsec = systemTime(SYSTEM_TIME_MONOTONIC) / 1000; |
| } |
| |
| // The MediaMuxer docs are unclear, but it appears that we |
| // need to pass either the full set of BufferInfo flags, or |
| // (flags & BUFFER_FLAG_SYNCFRAME). |
| err = muxer->writeSampleData(buffers[bufIndex], trackIdx, |
| ptsUsec, flags); |
| if (err != NO_ERROR) { |
| fprintf(stderr, "Failed writing data to muxer (err=%d)\n", |
| err); |
| return err; |
| } |
| debugNumFrames++; |
| } |
| err = encoder->releaseOutputBuffer(bufIndex); |
| if (err != NO_ERROR) { |
| fprintf(stderr, "Unable to release output buffer (err=%d)\n", |
| err); |
| return err; |
| } |
| if ((flags & MediaCodec::BUFFER_FLAG_EOS) != 0) { |
| // Not expecting EOS from SurfaceFlinger. Go with it. |
| ALOGD("Received end-of-stream"); |
| gStopRequested = false; |
| } |
| break; |
| case -EAGAIN: // INFO_TRY_AGAIN_LATER |
| ALOGV("Got -EAGAIN, looping"); |
| break; |
| case INFO_FORMAT_CHANGED: // INFO_OUTPUT_FORMAT_CHANGED |
| { |
| // format includes CSD, which we must provide to muxer |
| ALOGV("Encoder format changed"); |
| sp<AMessage> newFormat; |
| encoder->getOutputFormat(&newFormat); |
| trackIdx = muxer->addTrack(newFormat); |
| ALOGV("Starting muxer"); |
| err = muxer->start(); |
| if (err != NO_ERROR) { |
| fprintf(stderr, "Unable to start muxer (err=%d)\n", err); |
| return err; |
| } |
| } |
| break; |
| case INFO_OUTPUT_BUFFERS_CHANGED: // INFO_OUTPUT_BUFFERS_CHANGED |
| // not expected for an encoder; handle it anyway |
| ALOGV("Encoder buffers changed"); |
| err = encoder->getOutputBuffers(&buffers); |
| if (err != NO_ERROR) { |
| fprintf(stderr, |
| "Unable to get new output buffers (err=%d)\n", err); |
| return err; |
| } |
| break; |
| case INVALID_OPERATION: |
| fprintf(stderr, "Request for encoder buffer failed\n"); |
| return err; |
| default: |
| fprintf(stderr, |
| "Got weird result %d from dequeueOutputBuffer\n", err); |
| return err; |
| } |
| } |
| |
| ALOGV("Encoder stopping (req=%d)", gStopRequested); |
| if (gVerbose) { |
| printf("Encoder stopping; recorded %u frames in %lld seconds\n", |
| debugNumFrames, |
| nanoseconds_to_seconds(systemTime(CLOCK_MONOTONIC) - startWhenNsec)); |
| } |
| return NO_ERROR; |
| } |
| |
| /* |
| * Main "do work" method. |
| * |
| * Configures codec, muxer, and virtual display, then starts moving bits |
| * around. |
| */ |
| static status_t recordScreen(const char* fileName) { |
| status_t err; |
| |
| // Configure signal handler. |
| err = configureSignals(); |
| if (err != NO_ERROR) return err; |
| |
| // Start Binder thread pool. MediaCodec needs to be able to receive |
| // messages from mediaserver. |
| sp<ProcessState> self = ProcessState::self(); |
| self->startThreadPool(); |
| |
| // Get main display parameters. |
| sp<IBinder> mainDpy = SurfaceComposerClient::getBuiltInDisplay( |
| ISurfaceComposer::eDisplayIdMain); |
| DisplayInfo mainDpyInfo; |
| err = SurfaceComposerClient::getDisplayInfo(mainDpy, &mainDpyInfo); |
| if (err != NO_ERROR) { |
| fprintf(stderr, "ERROR: unable to get display characteristics\n"); |
| return err; |
| } |
| if (gVerbose) { |
| printf("Main display is %dx%d @%.2ffps (orientation=%u)\n", |
| mainDpyInfo.w, mainDpyInfo.h, mainDpyInfo.fps, |
| mainDpyInfo.orientation); |
| } |
| |
| bool rotated = isDeviceRotated(mainDpyInfo.orientation); |
| if (gVideoWidth == 0) { |
| gVideoWidth = rotated ? mainDpyInfo.h : mainDpyInfo.w; |
| } |
| if (gVideoHeight == 0) { |
| gVideoHeight = rotated ? mainDpyInfo.w : mainDpyInfo.h; |
| } |
| |
| // Configure and start the encoder. |
| sp<MediaCodec> encoder; |
| sp<IGraphicBufferProducer> bufferProducer; |
| err = prepareEncoder(mainDpyInfo.fps, &encoder, &bufferProducer); |
| |
| if (err != NO_ERROR && !gSizeSpecified) { |
| // fallback is defined for landscape; swap if we're in portrait |
| bool needSwap = gVideoWidth < gVideoHeight; |
| uint32_t newWidth = needSwap ? kFallbackHeight : kFallbackWidth; |
| uint32_t newHeight = needSwap ? kFallbackWidth : kFallbackHeight; |
| if (gVideoWidth != newWidth && gVideoHeight != newHeight) { |
| ALOGV("Retrying with 720p"); |
| fprintf(stderr, "WARNING: failed at %dx%d, retrying at %dx%d\n", |
| gVideoWidth, gVideoHeight, newWidth, newHeight); |
| gVideoWidth = newWidth; |
| gVideoHeight = newHeight; |
| err = prepareEncoder(mainDpyInfo.fps, &encoder, &bufferProducer); |
| } |
| } |
| if (err != NO_ERROR) { |
| return err; |
| } |
| |
| // Configure virtual display. |
| sp<IBinder> dpy; |
| err = prepareVirtualDisplay(mainDpyInfo, bufferProducer, &dpy); |
| if (err != NO_ERROR) { |
| encoder->release(); |
| encoder.clear(); |
| |
| return err; |
| } |
| |
| // Configure, but do not start, muxer. |
| sp<MediaMuxer> muxer = new MediaMuxer(fileName, |
| MediaMuxer::OUTPUT_FORMAT_MPEG_4); |
| if (gRotate) { |
| muxer->setOrientationHint(90); |
| } |
| |
| // Main encoder loop. |
| err = runEncoder(encoder, muxer); |
| if (err != NO_ERROR) { |
| encoder->release(); |
| encoder.clear(); |
| |
| return err; |
| } |
| |
| if (gVerbose) { |
| printf("Stopping encoder and muxer\n"); |
| } |
| |
| // Shut everything down, starting with the producer side. |
| bufferProducer = NULL; |
| SurfaceComposerClient::destroyDisplay(dpy); |
| |
| encoder->stop(); |
| muxer->stop(); |
| encoder->release(); |
| |
| return 0; |
| } |
| |
| /* |
| * Sends a broadcast to the media scanner to tell it about the new video. |
| * |
| * This is optional, but nice to have. |
| */ |
| static status_t notifyMediaScanner(const char* fileName) { |
| pid_t pid = fork(); |
| if (pid < 0) { |
| int err = errno; |
| ALOGW("fork() failed: %s", strerror(err)); |
| return -err; |
| } else if (pid > 0) { |
| // parent; wait for the child, mostly to make the verbose-mode output |
| // look right, but also to check for and log failures |
| int status; |
| pid_t actualPid = TEMP_FAILURE_RETRY(waitpid(pid, &status, 0)); |
| if (actualPid != pid) { |
| ALOGW("waitpid() returned %d (errno=%d)", actualPid, errno); |
| } else if (status != 0) { |
| ALOGW("'am broadcast' exited with status=%d", status); |
| } else { |
| ALOGV("'am broadcast' exited successfully"); |
| } |
| } else { |
| const char* kCommand = "/system/bin/am"; |
| |
| // child; we're single-threaded, so okay to alloc |
| String8 fileUrl("file://"); |
| fileUrl.append(fileName); |
| const char* const argv[] = { |
| kCommand, |
| "broadcast", |
| "-a", |
| "android.intent.action.MEDIA_SCANNER_SCAN_FILE", |
| "-d", |
| fileUrl.string(), |
| NULL |
| }; |
| if (gVerbose) { |
| printf("Executing:"); |
| for (int i = 0; argv[i] != NULL; i++) { |
| printf(" %s", argv[i]); |
| } |
| putchar('\n'); |
| } else { |
| // non-verbose, suppress 'am' output |
| ALOGV("closing stdout/stderr in child"); |
| int fd = open("/dev/null", O_WRONLY); |
| if (fd >= 0) { |
| dup2(fd, STDOUT_FILENO); |
| dup2(fd, STDERR_FILENO); |
| close(fd); |
| } |
| } |
| execv(kCommand, const_cast<char* const*>(argv)); |
| ALOGE("execv(%s) failed: %s\n", kCommand, strerror(errno)); |
| exit(1); |
| } |
| return NO_ERROR; |
| } |
| |
| /* |
| * Parses a string of the form "1280x720". |
| * |
| * Returns true on success. |
| */ |
| static bool parseWidthHeight(const char* widthHeight, uint32_t* pWidth, |
| uint32_t* pHeight) { |
| long width, height; |
| char* end; |
| |
| // Must specify base 10, or "0x0" gets parsed differently. |
| width = strtol(widthHeight, &end, 10); |
| if (end == widthHeight || *end != 'x' || *(end+1) == '\0') { |
| // invalid chars in width, or missing 'x', or missing height |
| return false; |
| } |
| height = strtol(end + 1, &end, 10); |
| if (*end != '\0') { |
| // invalid chars in height |
| return false; |
| } |
| |
| *pWidth = width; |
| *pHeight = height; |
| return true; |
| } |
| |
| /* |
| * Dumps usage on stderr. |
| */ |
| static void usage() { |
| fprintf(stderr, |
| "Usage: screenrecord [options] <filename>\n" |
| "\n" |
| "Records the device's display to a .mp4 file.\n" |
| "\n" |
| "Options:\n" |
| "--size WIDTHxHEIGHT\n" |
| " Set the video size, e.g. \"1280x720\". Default is the device's main\n" |
| " display resolution (if supported), 1280x720 if not. For best results,\n" |
| " use a size supported by the AVC encoder.\n" |
| "--bit-rate RATE\n" |
| " Set the video bit rate, in megabits per second. Default %dMbps.\n" |
| "--time-limit TIME\n" |
| " Set the maximum recording time, in seconds. Default / maximum is %d.\n" |
| "--rotate\n" |
| " Rotate the output 90 degrees.\n" |
| "--verbose\n" |
| " Display interesting information on stdout.\n" |
| "--help\n" |
| " Show this message.\n" |
| "\n" |
| "Recording continues until Ctrl-C is hit or the time limit is reached.\n" |
| "\n", |
| gBitRate / 1000000, gTimeLimitSec |
| ); |
| } |
| |
| /* |
| * Parses args and kicks things off. |
| */ |
| int main(int argc, char* const argv[]) { |
| static const struct option longOptions[] = { |
| { "help", no_argument, NULL, 'h' }, |
| { "verbose", no_argument, NULL, 'v' }, |
| { "size", required_argument, NULL, 's' }, |
| { "bit-rate", required_argument, NULL, 'b' }, |
| { "time-limit", required_argument, NULL, 't' }, |
| { "rotate", no_argument, NULL, 'r' }, |
| { NULL, 0, NULL, 0 } |
| }; |
| |
| while (true) { |
| int optionIndex = 0; |
| int ic = getopt_long(argc, argv, "", longOptions, &optionIndex); |
| if (ic == -1) { |
| break; |
| } |
| |
| switch (ic) { |
| case 'h': |
| usage(); |
| return 0; |
| case 'v': |
| gVerbose = true; |
| break; |
| case 's': |
| if (!parseWidthHeight(optarg, &gVideoWidth, &gVideoHeight)) { |
| fprintf(stderr, "Invalid size '%s', must be width x height\n", |
| optarg); |
| return 2; |
| } |
| if (gVideoWidth == 0 || gVideoHeight == 0) { |
| fprintf(stderr, |
| "Invalid size %ux%u, width and height may not be zero\n", |
| gVideoWidth, gVideoHeight); |
| return 2; |
| } |
| gSizeSpecified = true; |
| break; |
| case 'b': |
| gBitRate = atoi(optarg); |
| if (gBitRate < kMinBitRate || gBitRate > kMaxBitRate) { |
| fprintf(stderr, |
| "Bit rate %dbps outside acceptable range [%d,%d]\n", |
| gBitRate, kMinBitRate, kMaxBitRate); |
| return 2; |
| } |
| break; |
| case 't': |
| gTimeLimitSec = atoi(optarg); |
| if (gTimeLimitSec == 0 || gTimeLimitSec > kMaxTimeLimitSec) { |
| fprintf(stderr, |
| "Time limit %ds outside acceptable range [1,%d]\n", |
| gTimeLimitSec, kMaxTimeLimitSec); |
| return 2; |
| } |
| break; |
| case 'r': |
| gRotate = true; |
| break; |
| default: |
| if (ic != '?') { |
| fprintf(stderr, "getopt_long returned unexpected value 0x%x\n", ic); |
| } |
| return 2; |
| } |
| } |
| |
| if (optind != argc - 1) { |
| fprintf(stderr, "Must specify output file (see --help).\n"); |
| return 2; |
| } |
| |
| // MediaMuxer tries to create the file in the constructor, but we don't |
| // learn about the failure until muxer.start(), which returns a generic |
| // error code without logging anything. We attempt to create the file |
| // now for better diagnostics. |
| const char* fileName = argv[optind]; |
| int fd = open(fileName, O_CREAT | O_RDWR, 0644); |
| if (fd < 0) { |
| fprintf(stderr, "Unable to open '%s': %s\n", fileName, strerror(errno)); |
| return 1; |
| } |
| close(fd); |
| |
| status_t err = recordScreen(fileName); |
| if (err == NO_ERROR) { |
| // Try to notify the media scanner. Not fatal if this fails. |
| notifyMediaScanner(fileName); |
| } |
| ALOGD(err == NO_ERROR ? "success" : "failed"); |
| return (int) err; |
| } |