blob: 47fe0b32c3cffeebf00d9f10f1b87fcfea9cbe5e [file] [log] [blame]
/*
* Copyright (C) 2014 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "FastThread"
//#define LOG_NDEBUG 0
#define ATRACE_TAG ATRACE_TAG_AUDIO
#include "Configuration.h"
#include <linux/futex.h>
#include <sys/syscall.h>
#include <audio_utils/clock.h>
#include <cutils/atomic.h>
#include <utils/Log.h>
#include <utils/Trace.h>
#include "FastThread.h"
#include "FastThreadDumpState.h"
#include "TypedLogger.h"
#define FAST_DEFAULT_NS 999999999L // ~1 sec: default time to sleep
#define FAST_HOT_IDLE_NS 1000000L // 1 ms: time to sleep while hot idling
#define MIN_WARMUP_CYCLES 2 // minimum number of consecutive in-range loop cycles
// to wait for warmup
#define MAX_WARMUP_CYCLES 10 // maximum number of loop cycles to wait for warmup
namespace android {
FastThread::FastThread(const char *cycleMs, const char *loadUs) : Thread(false /*canCallJava*/),
// re-initialized to &sInitial by subclass constructor
mPrevious(NULL), mCurrent(NULL),
/* mOldTs({0, 0}), */
mOldTsValid(false),
mSleepNs(-1),
mPeriodNs(0),
mUnderrunNs(0),
mOverrunNs(0),
mForceNs(0),
mWarmupNsMin(0),
mWarmupNsMax(LONG_MAX),
// re-initialized to &mDummySubclassDumpState by subclass constructor
mDummyDumpState(NULL),
mDumpState(NULL),
mIgnoreNextOverrun(true),
#ifdef FAST_THREAD_STATISTICS
// mOldLoad
mOldLoadValid(false),
mBounds(0),
mFull(false),
// mTcu
#endif
mColdGen(0),
mIsWarm(false),
/* mMeasuredWarmupTs({0, 0}), */
mWarmupCycles(0),
mWarmupConsecutiveInRangeCycles(0),
mTimestampStatus(INVALID_OPERATION),
mCommand(FastThreadState::INITIAL),
#if 0
frameCount(0),
#endif
mAttemptedWrite(false)
// mCycleMs(cycleMs)
// mLoadUs(loadUs)
{
mOldTs.tv_sec = 0;
mOldTs.tv_nsec = 0;
mMeasuredWarmupTs.tv_sec = 0;
mMeasuredWarmupTs.tv_nsec = 0;
strlcpy(mCycleMs, cycleMs, sizeof(mCycleMs));
strlcpy(mLoadUs, loadUs, sizeof(mLoadUs));
}
FastThread::~FastThread()
{
}
bool FastThread::threadLoop()
{
// LOGT now works even if tlNBLogWriter is nullptr, but we're considering changing that,
// so this initialization permits a future change to remove the check for nullptr.
tlNBLogWriter = mDummyNBLogWriter.get();
for (;;) {
// either nanosleep, sched_yield, or busy wait
if (mSleepNs >= 0) {
if (mSleepNs > 0) {
ALOG_ASSERT(mSleepNs < 1000000000);
const struct timespec req = {0, mSleepNs};
nanosleep(&req, NULL);
} else {
sched_yield();
}
}
// default to long sleep for next cycle
mSleepNs = FAST_DEFAULT_NS;
// poll for state change
const FastThreadState *next = poll();
if (next == NULL) {
// continue to use the default initial state until a real state is available
// FIXME &sInitial not available, should save address earlier
//ALOG_ASSERT(mCurrent == &sInitial && previous == &sInitial);
next = mCurrent;
}
mCommand = next->mCommand;
if (next != mCurrent) {
// As soon as possible of learning of a new dump area, start using it
mDumpState = next->mDumpState != NULL ? next->mDumpState : mDummyDumpState;
tlNBLogWriter = next->mNBLogWriter != NULL ?
next->mNBLogWriter : mDummyNBLogWriter.get();
setNBLogWriter(tlNBLogWriter); // This is used for debugging only
// We want to always have a valid reference to the previous (non-idle) state.
// However, the state queue only guarantees access to current and previous states.
// So when there is a transition from a non-idle state into an idle state, we make a
// copy of the last known non-idle state so it is still available on return from idle.
// The possible transitions are:
// non-idle -> non-idle update previous from current in-place
// non-idle -> idle update previous from copy of current
// idle -> idle don't update previous
// idle -> non-idle don't update previous
if (!(mCurrent->mCommand & FastThreadState::IDLE)) {
if (mCommand & FastThreadState::IDLE) {
onIdle();
mOldTsValid = false;
#ifdef FAST_THREAD_STATISTICS
mOldLoadValid = false;
#endif
mIgnoreNextOverrun = true;
}
mPrevious = mCurrent;
}
mCurrent = next;
}
#if !LOG_NDEBUG
next = NULL; // not referenced again
#endif
mDumpState->mCommand = mCommand;
// FIXME what does this comment mean?
// << current, previous, command, dumpState >>
switch (mCommand) {
case FastThreadState::INITIAL:
case FastThreadState::HOT_IDLE:
mSleepNs = FAST_HOT_IDLE_NS;
continue;
case FastThreadState::COLD_IDLE:
// only perform a cold idle command once
// FIXME consider checking previous state and only perform if previous != COLD_IDLE
if (mCurrent->mColdGen != mColdGen) {
int32_t *coldFutexAddr = mCurrent->mColdFutexAddr;
ALOG_ASSERT(coldFutexAddr != NULL);
int32_t old = android_atomic_dec(coldFutexAddr);
if (old <= 0) {
syscall(__NR_futex, coldFutexAddr, FUTEX_WAIT_PRIVATE, old - 1, NULL);
}
int policy = sched_getscheduler(0) & ~SCHED_RESET_ON_FORK;
if (!(policy == SCHED_FIFO || policy == SCHED_RR)) {
ALOGE("did not receive expected priority boost on time");
}
// This may be overly conservative; there could be times that the normal mixer
// requests such a brief cold idle that it doesn't require resetting this flag.
mIsWarm = false;
mMeasuredWarmupTs.tv_sec = 0;
mMeasuredWarmupTs.tv_nsec = 0;
mWarmupCycles = 0;
mWarmupConsecutiveInRangeCycles = 0;
mSleepNs = -1;
mColdGen = mCurrent->mColdGen;
#ifdef FAST_THREAD_STATISTICS
mBounds = 0;
mFull = false;
#endif
mOldTsValid = !clock_gettime(CLOCK_MONOTONIC, &mOldTs);
mTimestampStatus = INVALID_OPERATION;
} else {
mSleepNs = FAST_HOT_IDLE_NS;
}
continue;
case FastThreadState::EXIT:
onExit();
return false;
default:
LOG_ALWAYS_FATAL_IF(!isSubClassCommand(mCommand));
break;
}
// there is a non-idle state available to us; did the state change?
if (mCurrent != mPrevious) {
onStateChange();
#if 1 // FIXME shouldn't need this
// only process state change once
mPrevious = mCurrent;
#endif
}
// do work using current state here
mAttemptedWrite = false;
onWork();
// To be exactly periodic, compute the next sleep time based on current time.
// This code doesn't have long-term stability when the sink is non-blocking.
// FIXME To avoid drift, use the local audio clock or watch the sink's fill status.
struct timespec newTs;
int rc = clock_gettime(CLOCK_MONOTONIC, &newTs);
if (rc == 0) {
if (mOldTsValid) {
time_t sec = newTs.tv_sec - mOldTs.tv_sec;
long nsec = newTs.tv_nsec - mOldTs.tv_nsec;
ALOGE_IF(sec < 0 || (sec == 0 && nsec < 0),
"clock_gettime(CLOCK_MONOTONIC) failed: was %ld.%09ld but now %ld.%09ld",
mOldTs.tv_sec, mOldTs.tv_nsec, newTs.tv_sec, newTs.tv_nsec);
if (nsec < 0) {
--sec;
nsec += 1000000000;
}
// To avoid an initial underrun on fast tracks after exiting standby,
// do not start pulling data from tracks and mixing until warmup is complete.
// Warmup is considered complete after the earlier of:
// MIN_WARMUP_CYCLES consecutive in-range write() attempts,
// where "in-range" means mWarmupNsMin <= cycle time <= mWarmupNsMax
// MAX_WARMUP_CYCLES write() attempts.
// This is overly conservative, but to get better accuracy requires a new HAL API.
if (!mIsWarm && mAttemptedWrite) {
mMeasuredWarmupTs.tv_sec += sec;
mMeasuredWarmupTs.tv_nsec += nsec;
if (mMeasuredWarmupTs.tv_nsec >= 1000000000) {
mMeasuredWarmupTs.tv_sec++;
mMeasuredWarmupTs.tv_nsec -= 1000000000;
}
++mWarmupCycles;
if (mWarmupNsMin <= nsec && nsec <= mWarmupNsMax) {
ALOGV("warmup cycle %d in range: %.03f ms", mWarmupCycles, nsec * 1e-9);
++mWarmupConsecutiveInRangeCycles;
} else {
ALOGV("warmup cycle %d out of range: %.03f ms", mWarmupCycles, nsec * 1e-9);
mWarmupConsecutiveInRangeCycles = 0;
}
if ((mWarmupConsecutiveInRangeCycles >= MIN_WARMUP_CYCLES) ||
(mWarmupCycles >= MAX_WARMUP_CYCLES)) {
mIsWarm = true;
mDumpState->mMeasuredWarmupTs = mMeasuredWarmupTs;
mDumpState->mWarmupCycles = mWarmupCycles;
const double measuredWarmupMs = (mMeasuredWarmupTs.tv_sec * 1e3) +
(mMeasuredWarmupTs.tv_nsec * 1e-6);
LOG_WARMUP_TIME(measuredWarmupMs);
}
}
mSleepNs = -1;
if (mIsWarm) {
if (sec > 0 || nsec > mUnderrunNs) {
ATRACE_NAME("underrun");
// FIXME only log occasionally
ALOGV("underrun: time since last cycle %d.%03ld sec",
(int) sec, nsec / 1000000L);
mDumpState->mUnderruns++;
LOG_UNDERRUN(audio_utils_ns_from_timespec(&newTs));
mIgnoreNextOverrun = true;
} else if (nsec < mOverrunNs) {
if (mIgnoreNextOverrun) {
mIgnoreNextOverrun = false;
} else {
// FIXME only log occasionally
ALOGV("overrun: time since last cycle %d.%03ld sec",
(int) sec, nsec / 1000000L);
mDumpState->mOverruns++;
LOG_OVERRUN(audio_utils_ns_from_timespec(&newTs));
}
// This forces a minimum cycle time. It:
// - compensates for an audio HAL with jitter due to sample rate conversion
// - works with a variable buffer depth audio HAL that never pulls at a
// rate < than mOverrunNs per buffer.
// - recovers from overrun immediately after underrun
// It doesn't work with a non-blocking audio HAL.
mSleepNs = mForceNs - nsec;
} else {
mIgnoreNextOverrun = false;
}
}
#ifdef FAST_THREAD_STATISTICS
if (mIsWarm) {
// advance the FIFO queue bounds
size_t i = mBounds & (mDumpState->mSamplingN - 1);
mBounds = (mBounds & 0xFFFF0000) | ((mBounds + 1) & 0xFFFF);
if (mFull) {
//mBounds += 0x10000;
__builtin_add_overflow(mBounds, 0x10000, &mBounds);
} else if (!(mBounds & (mDumpState->mSamplingN - 1))) {
mFull = true;
}
// compute the delta value of clock_gettime(CLOCK_MONOTONIC)
uint32_t monotonicNs = nsec;
if (sec > 0 && sec < 4) {
monotonicNs += sec * 1000000000U; // unsigned to prevent signed overflow.
}
// compute raw CPU load = delta value of clock_gettime(CLOCK_THREAD_CPUTIME_ID)
uint32_t loadNs = 0;
struct timespec newLoad;
rc = clock_gettime(CLOCK_THREAD_CPUTIME_ID, &newLoad);
if (rc == 0) {
if (mOldLoadValid) {
sec = newLoad.tv_sec - mOldLoad.tv_sec;
nsec = newLoad.tv_nsec - mOldLoad.tv_nsec;
if (nsec < 0) {
--sec;
nsec += 1000000000;
}
loadNs = nsec;
if (sec > 0 && sec < 4) {
loadNs += sec * 1000000000U; // unsigned to prevent signed overflow.
}
} else {
// first time through the loop
mOldLoadValid = true;
}
mOldLoad = newLoad;
}
#ifdef CPU_FREQUENCY_STATISTICS
// get the absolute value of CPU clock frequency in kHz
int cpuNum = sched_getcpu();
uint32_t kHz = mTcu.getCpukHz(cpuNum);
kHz = (kHz << 4) | (cpuNum & 0xF);
#endif
// save values in FIFO queues for dumpsys
// these stores #1, #2, #3 are not atomic with respect to each other,
// or with respect to store #4 below
mDumpState->mMonotonicNs[i] = monotonicNs;
LOG_WORK_TIME(monotonicNs);
mDumpState->mLoadNs[i] = loadNs;
#ifdef CPU_FREQUENCY_STATISTICS
mDumpState->mCpukHz[i] = kHz;
#endif
// this store #4 is not atomic with respect to stores #1, #2, #3 above, but
// the newest open & oldest closed halves are atomic with respect to each other
mDumpState->mBounds = mBounds;
ATRACE_INT(mCycleMs, monotonicNs / 1000000);
ATRACE_INT(mLoadUs, loadNs / 1000);
}
#endif
} else {
// first time through the loop
mOldTsValid = true;
mSleepNs = mPeriodNs;
mIgnoreNextOverrun = true;
}
mOldTs = newTs;
} else {
// monotonic clock is broken
mOldTsValid = false;
mSleepNs = mPeriodNs;
}
} // for (;;)
// never return 'true'; Thread::_threadLoop() locks mutex which can result in priority inversion
}
} // namespace android