| |
| /* ----------------------------------------------------------------------------------------------------------- |
| Software License for The Fraunhofer FDK AAC Codec Library for Android |
| |
| © Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. |
| All rights reserved. |
| |
| 1. INTRODUCTION |
| The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements |
| the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. |
| This FDK AAC Codec software is intended to be used on a wide variety of Android devices. |
| |
| AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual |
| audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by |
| independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part |
| of the MPEG specifications. |
| |
| Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) |
| may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners |
| individually for the purpose of encoding or decoding bit streams in products that are compliant with |
| the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license |
| these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec |
| software may already be covered under those patent licenses when it is used for those licensed purposes only. |
| |
| Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, |
| are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional |
| applications information and documentation. |
| |
| 2. COPYRIGHT LICENSE |
| |
| Redistribution and use in source and binary forms, with or without modification, are permitted without |
| payment of copyright license fees provided that you satisfy the following conditions: |
| |
| You must retain the complete text of this software license in redistributions of the FDK AAC Codec or |
| your modifications thereto in source code form. |
| |
| You must retain the complete text of this software license in the documentation and/or other materials |
| provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. |
| You must make available free of charge copies of the complete source code of the FDK AAC Codec and your |
| modifications thereto to recipients of copies in binary form. |
| |
| The name of Fraunhofer may not be used to endorse or promote products derived from this library without |
| prior written permission. |
| |
| You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec |
| software or your modifications thereto. |
| |
| Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software |
| and the date of any change. For modified versions of the FDK AAC Codec, the term |
| "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term |
| "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." |
| |
| 3. NO PATENT LICENSE |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, |
| ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with |
| respect to this software. |
| |
| You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized |
| by appropriate patent licenses. |
| |
| 4. DISCLAIMER |
| |
| This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors |
| "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties |
| of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
| CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, |
| including but not limited to procurement of substitute goods or services; loss of use, data, or profits, |
| or business interruption, however caused and on any theory of liability, whether in contract, strict |
| liability, or tort (including negligence), arising in any way out of the use of this software, even if |
| advised of the possibility of such damage. |
| |
| 5. CONTACT INFORMATION |
| |
| Fraunhofer Institute for Integrated Circuits IIS |
| Attention: Audio and Multimedia Departments - FDK AAC LL |
| Am Wolfsmantel 33 |
| 91058 Erlangen, Germany |
| |
| www.iis.fraunhofer.de/amm |
| amm-info@iis.fraunhofer.de |
| ----------------------------------------------------------------------------------------------------------- */ |
| |
| /************************** MPEG-4 Transport Decoder *********************** |
| |
| Author(s): Manuel Jander |
| Description: MPEG Transport decoder |
| |
| ******************************************************************************/ |
| |
| #ifndef __TPDEC_LIB_H__ |
| #define __TPDEC_LIB_H__ |
| |
| #include "tp_data.h" |
| |
| #include "FDK_bitstream.h" |
| |
| #define TRANSPORTDEC_INBUF_SIZE ( 8192 ) /*!< Size is in bytes. |
| Set the transport input buffer size carefully and |
| assure that it fulfills the requirements of the |
| supported transport format(s). */ |
| |
| typedef enum { |
| TRANSPORTDEC_OK = 0, /*!< All fine. */ |
| |
| /* Synchronization errors. Wait for new input data and try again. */ |
| tpdec_sync_error_start = 0x100, |
| TRANSPORTDEC_NOT_ENOUGH_BITS, /*!< Out of bits. Provide more bits and try again. */ |
| TRANSPORTDEC_SYNC_ERROR, /*!< No sync was found or sync got lost. Keep trying. */ |
| tpdec_sync_error_end, |
| |
| /* Decode errors. Mostly caused due to bit errors. */ |
| tpdec_decode_error_start = 0x400, |
| TRANSPORTDEC_PARSE_ERROR, /*!< Bitstream data showed inconsistencies (wrong syntax). */ |
| TRANSPORTDEC_UNSUPPORTED_FORMAT, /*!< Unsupported format or feature found in the bitstream data. */ |
| TRANSPORTDEC_CRC_ERROR, /*!< CRC error encountered in bitstream data. */ |
| tpdec_decode_error_end, |
| |
| /* Fatal errors. Stop immediately on one of these errors! */ |
| tpdec_fatal_error_start = 0x200, |
| TRANSPORTDEC_UNKOWN_ERROR, /*!< An unknown error occured. */ |
| TRANSPORTDEC_INVALID_PARAMETER, /*!< An invalid parameter was passed to a function. */ |
| TRANSPORTDEC_NEED_TO_RESTART, /*!< The decoder needs to be restarted, since the requiered |
| configuration change cannot be performed. */ |
| tpdec_fatal_error_end |
| |
| } TRANSPORTDEC_ERROR; |
| |
| |
| /** Macro to identify decode errors. */ |
| #define TPDEC_IS_DECODE_ERROR(err) ( ((err>=tpdec_decode_error_start) && (err<=tpdec_decode_error_end)) ? 1 : 0) |
| /** Macro to identify fatal errors. */ |
| #define TPDEC_IS_FATAL_ERROR(err) ( ((err>=tpdec_fatal_error_start) && (err<=tpdec_fatal_error_end)) ? 1 : 0) |
| |
| |
| /** |
| * \brief Parameter identifiers for transportDec_SetParam() |
| */ |
| typedef enum { |
| TPDEC_PARAM_MINIMIZE_DELAY = 1, /** Delay minimization strategy. 0: none, 1: discard as many frames as possible. */ |
| TPDEC_PARAM_EARLY_CONFIG, /** Enable early config discovery. */ |
| TPDEC_PARAM_IGNORE_BUFFERFULLNESS, /** Ignore buffer fullness. */ |
| TPDEC_PARAM_SET_BITRATE, /** Set average bit rate for bit stream interruption frame misses estimation. */ |
| TPDEC_PARAM_RESET, /** Reset transport decoder instance status. */ |
| TPDEC_PARAM_BURST_PERIOD /** Set data reception burst period in mili seconds. */ |
| } TPDEC_PARAM; |
| |
| /* ISO/IEC 14496-3 4.4.1.1 Table 4.2 Program config element */ |
| #define PC_FSB_CHANNELS_MAX 16 /* Front/Side/Back channels */ |
| #define PC_LFE_CHANNELS_MAX 4 |
| #define PC_ASSOCDATA_MAX 8 |
| #define PC_CCEL_MAX 16 /* CC elements */ |
| #define PC_COMMENTLENGTH 256 |
| |
| |
| /*! |
| \brief Reset Program Config Element. |
| \param pPce Program Config Element structure. |
| \return void |
| */ |
| void CProgramConfig_Reset ( CProgramConfig *pPce ); |
| |
| /*! |
| \brief Initialize Program Config Element. |
| \param pPce Program Config Element structure. |
| \return void |
| */ |
| void CProgramConfig_Init ( CProgramConfig *pPce ); |
| |
| /*! |
| \brief Inquire state of present Program Config Element structure. |
| \param pPce Program Config Element structure. |
| \return 1 if the PCE structure is filled correct, |
| 0 if no valid PCE present. |
| */ |
| int CProgramConfig_IsValid ( const CProgramConfig *pPce ); |
| |
| #ifdef TP_PCE_ENABLE |
| /*! |
| \brief Read Program Config Element. |
| \param pPce Program Config Element structure. |
| \param bs Bitstream buffer to read from. |
| \param alignAnchor Align bitstream to alignAnchor bits after all read operations. |
| \return void |
| */ |
| void CProgramConfig_Read ( CProgramConfig *pPce, |
| HANDLE_FDK_BITSTREAM bs, |
| UINT alignAnchor ); |
| |
| /*! |
| \brief Compare two Program Config Elements. |
| \param pPce1 Pointer to first Program Config Element structure. |
| \param pPce2 Pointer to second Program Config Element structure. |
| \return -1 if PCEs are completely different, |
| 0 if PCEs are completely equal, |
| 1 if PCEs are different but have the same channel config, |
| 2 if PCEs have different channel config but same number of channels. |
| */ |
| int CProgramConfig_Compare ( const CProgramConfig * const pPce1, |
| const CProgramConfig * const pPce2 ); |
| |
| /*! |
| \brief Get a Program Config Element that matches the predefined MPEG-4 channel configurations 1-14. |
| \param pPce Program Config Element structure. |
| \param channelConfig MPEG-4 channel configuration. |
| \return void |
| */ |
| void CProgramConfig_GetDefault ( CProgramConfig *pPce, |
| const UINT channelConfig ); |
| #endif /* TP_PCE_ENABLE */ |
| |
| /** |
| * \brief Lookup and verify a given element. The decoder calls this |
| * method with every new element ID found in the bitstream. |
| * |
| * \param pPce A valid Program config structure. |
| * \param tag Tag of the current element to be looked up. |
| * \param channelIdx The current channel count of the decoder parser. |
| * \param chMapping Array to store the canonical channel mapping indexes. |
| * \param chType Array to store the audio channel type. |
| * \param chIndex Array to store the individual audio channel type index. |
| * \param elMapping Pointer where the canonical element index is stored. |
| * \param elType The element id of the current element to be looked up. |
| * |
| * \return Non-zero if the element belongs to the current program, zero |
| * if it does not. |
| */ |
| int CProgramConfig_LookupElement( |
| CProgramConfig *pPce, |
| UINT channelConfig, |
| const UINT tag, |
| const UINT channelIdx, |
| UCHAR chMapping[], |
| AUDIO_CHANNEL_TYPE chType[], |
| UCHAR chIndex[], |
| UCHAR *elMapping, |
| MP4_ELEMENT_ID elList[], |
| MP4_ELEMENT_ID elType |
| ); |
| |
| /** |
| * \brief Get table of elements in canonical order. |
| * \param pPce A valid program config structure. |
| * \param table An array where the element IDs are stored. |
| * \return Total element count including all SCE, CPE and LFE. |
| */ |
| int CProgramConfig_GetElementTable( const CProgramConfig *pPce, |
| MP4_ELEMENT_ID table[], |
| const INT elListSize ); |
| |
| /** |
| * \brief Initialize a given AudioSpecificConfig structure. |
| * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. |
| * \return void |
| */ |
| void AudioSpecificConfig_Init(CSAudioSpecificConfig *pAsc); |
| |
| /** |
| * \brief Parse a AudioSpecificConfig from a given bitstream handle. |
| * |
| * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. |
| * \param hBs Bitstream handle. |
| * \param fExplicitBackwardCompatible Do explicit backward compatibility parsing if set (flag). |
| * \param cb pointer to structure holding callback information |
| * |
| * \return Total element count including all SCE, CPE and LFE. |
| */ |
| TRANSPORTDEC_ERROR AudioSpecificConfig_Parse( |
| CSAudioSpecificConfig *pAsc, |
| HANDLE_FDK_BITSTREAM hBs, |
| int fExplicitBackwardCompatible, |
| CSTpCallBacks *cb |
| ); |
| |
| /* CELP stuff */ |
| enum { |
| MPE = 0, |
| RPE = 1, |
| fs8KHz = 0, |
| fs16KHz = 1 |
| }; |
| |
| /* Defintion of flags that can be passed to transportDecOpen() */ |
| #define TP_FLAG_MPEG4 1 |
| |
| /* Capability flags */ |
| #define CAPF_TPDEC_ADIF 0x00001000 /**< Flag indicating support for ADIF transport format. */ |
| #define CAPF_TPDEC_ADTS 0x00002000 /**< Flag indicating support for ADTS transport format. */ |
| #define CAPF_TPDEC_LOAS 0x00004000 /**< Flag indicating support for LOAS transport format. */ |
| #define CAPF_TPDEC_LATM 0x00008000 /**< Flag indicating support for LATM transport format. */ |
| #define CAPF_TPDEC_RAWPACKETS 0x00010000 /**< Flag indicating support for raw packets transport format. */ |
| |
| typedef struct TRANSPORTDEC *HANDLE_TRANSPORTDEC; |
| |
| |
| /** |
| * \brief Configure Transport Decoder via a binary coded AudioSpecificConfig or StreamMuxConfig. |
| * The previously requested configuration callback will be called as well. The buffer conf |
| * must containt a SMC in case of LOAS/LATM transport format, and an ASC elseways. |
| * |
| * \param hTp Handle of a transport decoder. |
| * \param conf UCHAR buffer of the binary coded config (ASC or SMC). |
| * \param length The length in bytes of the conf buffer. |
| * |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_OutOfBandConfig( const HANDLE_TRANSPORTDEC hTp, |
| UCHAR *conf, |
| const UINT length, |
| const UINT layer ); |
| |
| /** |
| * \brief Open Transport medium for reading. |
| * |
| * \param transportDecFmt Format of the transport decoder medium to be accessed. |
| * \param flags Transport decoder flags. Currently only TP_FLAG_MPEG4, which signals a |
| * MPEG4 capable decoder (relevant for ADTS only). |
| * |
| * \return A pointer to a valid and allocated HANDLE_TRANSPORTDEC or a null pointer on failure. |
| */ |
| HANDLE_TRANSPORTDEC transportDec_Open( TRANSPORT_TYPE transportDecFmt, |
| const UINT flags ); |
| |
| /** |
| * \brief Register configuration change callback. |
| * \param hTp Handle of transport decoder. |
| * \param cbUpdateConfig Pointer to a callback function to handle audio config changes. |
| * \param user_data void pointer for user data passed to the callback as first parameter. |
| * \return 0 on success. |
| */ |
| int transportDec_RegisterAscCallback ( |
| HANDLE_TRANSPORTDEC hTp, |
| const cbUpdateConfig_t cbUpdateConfig, |
| void* user_data ); |
| |
| /** |
| * \brief Register SSC parser callback. |
| * \param hTp Handle of transport decoder. |
| * \param cbUpdateConfig Pointer to a callback function to handle SSC parsing. |
| * \param user_data void pointer for user data passed to the callback as first parameter. |
| * \return 0 on success. |
| */ |
| int transportDec_RegisterSscCallback ( |
| HANDLE_TRANSPORTDEC hTp, |
| const cbSsc_t cbSscParse, |
| void* user_data ); |
| |
| /** |
| * \brief Register SBR header parser callback. |
| * \param hTp Handle of transport decoder. |
| * \param cbUpdateConfig Pointer to a callback function to handle SBR header parsing. |
| * \param user_data void pointer for user data passed to the callback as first parameter. |
| * \return 0 on success. |
| */ |
| int transportDec_RegisterSbrCallback( HANDLE_TRANSPORTDEC hTpDec, const cbSbr_t cbSbr, void* user_data); |
| |
| /** |
| * \brief Fill internal input buffer with bitstream data from the external input buffer. |
| * The function only copies such data as long as the decoder-internal input buffer is not full. |
| * So it grabs whatever it can from pBuffer and returns information (bytesValid) so that at a |
| * subsequent call of %transportDec_FillData(), the right position in pBuffer can be determined to |
| * grab the next data. |
| * |
| * \param hTp Handle of transportDec. |
| * \param pBuffer Pointer to external input buffer. |
| * \param bufferSize Size of external input buffer. This argument is required because decoder-internally |
| * we need the information to calculate the offset to pBuffer, where the next |
| * available data is, which is then fed into the decoder-internal buffer (as much |
| * as possible). Our example framework implementation fills the buffer at pBuffer |
| * again, once it contains no available valid bytes anymore (meaning bytesValid equal 0). |
| * \param bytesValid Number of bitstream bytes in the external bitstream buffer that have not yet been |
| * copied into the decoder's internal bitstream buffer by calling this function. |
| * The value is updated according to the amount of newly copied bytes. |
| * \param layer The layer the bitstream belongs to. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_FillData( |
| const HANDLE_TRANSPORTDEC hTp, |
| UCHAR *pBuffer, |
| const UINT bufferSize, |
| UINT *pBytesValid, |
| const INT layer ); |
| |
| /** |
| * \brief Get transportDec bitstream handle. |
| * \param hTp Pointer to a transport decoder handle. |
| * \return HANDLE_FDK_BITSTREAM bitstream handle. |
| */ |
| HANDLE_FDK_BITSTREAM transportDec_GetBitstream ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); |
| |
| /** |
| * \brief Get transport format. |
| * \param hTp Pointer to a transport decoder handle. |
| * \return The transport format. |
| */ |
| TRANSPORT_TYPE transportDec_GetFormat ( const HANDLE_TRANSPORTDEC hTp ); |
| |
| /** |
| * \brief Get the current buffer fullness value. |
| * |
| * \param hTp Handle of a transport decoder. |
| * |
| * \return Buffer fullness |
| */ |
| INT transportDec_GetBufferFullness( const HANDLE_TRANSPORTDEC hTp ); |
| |
| /** |
| * \brief Close and deallocate transportDec. |
| * \param phTp Pointer to a previously allocated transport decoder handle. |
| * \return void |
| */ |
| void transportDec_Close ( HANDLE_TRANSPORTDEC *phTp ); |
| |
| /** |
| * \brief Read one access unit from the transportDec medium. |
| * \param hTp Handle of transportDec. |
| * \param length On return, this value is overwritten with the actual access unit length in bits. |
| * Set to -1 if length is unknown. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_ReadAccessUnit ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); |
| |
| /** |
| * \brief Get the remaining amount of bits of the current access unit. The result |
| * can be below zero, meaning that too many bits have been read. |
| * \param hTp Handle of transportDec. |
| * \return amount of remaining bits. |
| */ |
| INT transportDec_GetAuBitsRemaining( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); |
| |
| /** |
| * \brief Get the total amount of bits of the current access unit. |
| * \param hTp Handle of transportDec. |
| * \return amount of total bits. |
| */ |
| INT transportDec_GetAuBitsTotal( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); |
| |
| /** |
| * \brief This function is required to be called when the decoder has finished parsing |
| * one Access Unit for bitstream housekeeping. |
| * \param hTp Transport Handle. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_EndAccessUnit ( const HANDLE_TRANSPORTDEC hTp ); |
| |
| /** |
| * \brief Obtain the amount of missing access units if applicable in case of |
| * a bit stream synchronization error. Each time transportDec_ReadAccessUnit() |
| * returns TRANSPORTDEC_SYNC_ERROR this function can be called to retrieve an estimate |
| * of the amount of missing access units. This works only in case of constant average |
| * bit rate (has to be known) and if the parameter TPDEC_PARAM_SET_BITRATE has been set |
| * accordingly. |
| * \param hTp Transport Handle. |
| * \param pNAccessUnits pointer to a memory location where the estimated lost frame count will be stored into. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_GetMissingAccessUnitCount ( INT *pNAccessUnits, HANDLE_TRANSPORTDEC hTp ); |
| |
| |
| /** |
| * \brief Set a given setting. |
| * \param hTp Transport Handle. |
| * \param param Identifier of the parameter to be changed. |
| * \param value Value for the parameter to be changed. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_SetParam ( const HANDLE_TRANSPORTDEC hTp, |
| const TPDEC_PARAM param, |
| const INT value ); |
| |
| /** |
| * \brief Get number of subframes (for LATM or ADTS) |
| * \param hTp Transport Handle. |
| * \return Number of ADTS/LATM subframes (return 1 for all other transport types). |
| */ |
| UINT transportDec_GetNrOfSubFrames(HANDLE_TRANSPORTDEC hTp); |
| |
| |
| /** |
| * \brief Get info structure of transport decoder library. |
| * \param info A pointer to an allocated LIB_INFO struct. |
| * \return Error code. |
| */ |
| TRANSPORTDEC_ERROR transportDec_GetLibInfo( LIB_INFO *info ); |
| |
| /* ADTS CRC support */ |
| |
| /** |
| * \brief Set current bitstream position as start of a new data region. |
| * \param hTp Transport handle. |
| * \param mBits Size in bits of the data region. Set to 0 if it should not be of a fixed size. |
| * \return Data region ID, which should be used when calling transportDec_CrcEndReg(). |
| */ |
| int transportDec_CrcStartReg ( const HANDLE_TRANSPORTDEC hTp, |
| const INT mBits ); |
| |
| /** |
| * \brief Set end of data region. |
| * \param hTp Transport handle. |
| * \param reg Data region ID, opbtained from transportDec_CrcStartReg(). |
| * \return void |
| */ |
| void transportDec_CrcEndReg ( const HANDLE_TRANSPORTDEC hTp, |
| const INT reg ); |
| |
| /** |
| * \brief Calculate ADTS crc and check if it is correct. The ADTS checksum is held internally. |
| * \param hTp Transport handle. |
| * \return Return TRANSPORTDEC_OK if the CRC is ok, or error if CRC is not correct. |
| */ |
| TRANSPORTDEC_ERROR transportDec_CrcCheck ( const HANDLE_TRANSPORTDEC hTp ); |
| |
| |
| #endif /* #ifndef __TPDEC_LIB_H__ */ |