| /****************************************************************************** |
| * |
| * Module Name: nspredef - Validation of ACPI predefined methods and objects |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2020, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #define ACPI_CREATE_PREDEFINED_TABLE |
| |
| #include "acpi.h" |
| #include "accommon.h" |
| #include "acnamesp.h" |
| #include "acpredef.h" |
| |
| |
| #define _COMPONENT ACPI_NAMESPACE |
| ACPI_MODULE_NAME ("nspredef") |
| |
| |
| /******************************************************************************* |
| * |
| * This module validates predefined ACPI objects that appear in the namespace, |
| * at the time they are evaluated (via AcpiEvaluateObject). The purpose of this |
| * validation is to detect problems with BIOS-exposed predefined ACPI objects |
| * before the results are returned to the ACPI-related drivers. |
| * |
| * There are several areas that are validated: |
| * |
| * 1) The number of input arguments as defined by the method/object in the |
| * ASL is validated against the ACPI specification. |
| * 2) The type of the return object (if any) is validated against the ACPI |
| * specification. |
| * 3) For returned package objects, the count of package elements is |
| * validated, as well as the type of each package element. Nested |
| * packages are supported. |
| * |
| * For any problems found, a warning message is issued. |
| * |
| ******************************************************************************/ |
| |
| |
| /* Local prototypes */ |
| |
| static ACPI_STATUS |
| AcpiNsCheckReference ( |
| ACPI_EVALUATE_INFO *Info, |
| ACPI_OPERAND_OBJECT *ReturnObject); |
| |
| static UINT32 |
| AcpiNsGetBitmappedType ( |
| ACPI_OPERAND_OBJECT *ReturnObject); |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsCheckReturnValue |
| * |
| * PARAMETERS: Node - Namespace node for the method/object |
| * Info - Method execution information block |
| * UserParamCount - Number of parameters actually passed |
| * ReturnStatus - Status from the object evaluation |
| * ReturnObjectPtr - Pointer to the object returned from the |
| * evaluation of a method or object |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Check the value returned from a predefined name. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiNsCheckReturnValue ( |
| ACPI_NAMESPACE_NODE *Node, |
| ACPI_EVALUATE_INFO *Info, |
| UINT32 UserParamCount, |
| ACPI_STATUS ReturnStatus, |
| ACPI_OPERAND_OBJECT **ReturnObjectPtr) |
| { |
| ACPI_STATUS Status; |
| const ACPI_PREDEFINED_INFO *Predefined; |
| |
| |
| /* If not a predefined name, we cannot validate the return object */ |
| |
| Predefined = Info->Predefined; |
| if (!Predefined) |
| { |
| return (AE_OK); |
| } |
| |
| /* |
| * If the method failed or did not actually return an object, we cannot |
| * validate the return object |
| */ |
| if ((ReturnStatus != AE_OK) && |
| (ReturnStatus != AE_CTRL_RETURN_VALUE)) |
| { |
| return (AE_OK); |
| } |
| |
| /* |
| * Return value validation and possible repair. |
| * |
| * 1) Don't perform return value validation/repair if this feature |
| * has been disabled via a global option. |
| * |
| * 2) We have a return value, but if one wasn't expected, just exit, |
| * this is not a problem. For example, if the "Implicit Return" |
| * feature is enabled, methods will always return a value. |
| * |
| * 3) If the return value can be of any type, then we cannot perform |
| * any validation, just exit. |
| */ |
| if (AcpiGbl_DisableAutoRepair || |
| (!Predefined->Info.ExpectedBtypes) || |
| (Predefined->Info.ExpectedBtypes == ACPI_RTYPE_ALL)) |
| { |
| return (AE_OK); |
| } |
| |
| /* |
| * Check that the type of the main return object is what is expected |
| * for this predefined name |
| */ |
| Status = AcpiNsCheckObjectType (Info, ReturnObjectPtr, |
| Predefined->Info.ExpectedBtypes, ACPI_NOT_PACKAGE_ELEMENT); |
| if (ACPI_FAILURE (Status)) |
| { |
| goto Exit; |
| } |
| |
| /* |
| * |
| * 4) If there is no return value and it is optional, just return |
| * AE_OK (_WAK). |
| */ |
| if (!(*ReturnObjectPtr)) |
| { |
| goto Exit; |
| } |
| |
| /* |
| * For returned Package objects, check the type of all sub-objects. |
| * Note: Package may have been newly created by call above. |
| */ |
| if ((*ReturnObjectPtr)->Common.Type == ACPI_TYPE_PACKAGE) |
| { |
| Info->ParentPackage = *ReturnObjectPtr; |
| Status = AcpiNsCheckPackage (Info, ReturnObjectPtr); |
| if (ACPI_FAILURE (Status)) |
| { |
| /* We might be able to fix some errors */ |
| |
| if ((Status != AE_AML_OPERAND_TYPE) && |
| (Status != AE_AML_OPERAND_VALUE)) |
| { |
| goto Exit; |
| } |
| } |
| } |
| |
| /* |
| * The return object was OK, or it was successfully repaired above. |
| * Now make some additional checks such as verifying that package |
| * objects are sorted correctly (if required) or buffer objects have |
| * the correct data width (bytes vs. dwords). These repairs are |
| * performed on a per-name basis, i.e., the code is specific to |
| * particular predefined names. |
| */ |
| Status = AcpiNsComplexRepairs (Info, Node, Status, ReturnObjectPtr); |
| |
| Exit: |
| /* |
| * If the object validation failed or if we successfully repaired one |
| * or more objects, mark the parent node to suppress further warning |
| * messages during the next evaluation of the same method/object. |
| */ |
| if (ACPI_FAILURE (Status) || |
| (Info->ReturnFlags & ACPI_OBJECT_REPAIRED)) |
| { |
| Node->Flags |= ANOBJ_EVALUATED; |
| } |
| |
| return (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsCheckObjectType |
| * |
| * PARAMETERS: Info - Method execution information block |
| * ReturnObjectPtr - Pointer to the object returned from the |
| * evaluation of a method or object |
| * ExpectedBtypes - Bitmap of expected return type(s) |
| * PackageIndex - Index of object within parent package (if |
| * applicable - ACPI_NOT_PACKAGE_ELEMENT |
| * otherwise) |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Check the type of the return object against the expected object |
| * type(s). Use of Btype allows multiple expected object types. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiNsCheckObjectType ( |
| ACPI_EVALUATE_INFO *Info, |
| ACPI_OPERAND_OBJECT **ReturnObjectPtr, |
| UINT32 ExpectedBtypes, |
| UINT32 PackageIndex) |
| { |
| ACPI_OPERAND_OBJECT *ReturnObject = *ReturnObjectPtr; |
| ACPI_STATUS Status = AE_OK; |
| char TypeBuffer[96]; /* Room for 10 types */ |
| |
| |
| /* A Namespace node should not get here, but make sure */ |
| |
| if (ReturnObject && |
| ACPI_GET_DESCRIPTOR_TYPE (ReturnObject) == ACPI_DESC_TYPE_NAMED) |
| { |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, |
| "Invalid return type - Found a Namespace node [%4.4s] type %s", |
| ReturnObject->Node.Name.Ascii, |
| AcpiUtGetTypeName (ReturnObject->Node.Type))); |
| return (AE_AML_OPERAND_TYPE); |
| } |
| |
| /* |
| * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type. |
| * The bitmapped type allows multiple possible return types. |
| * |
| * Note, the cases below must handle all of the possible types returned |
| * from all of the predefined names (including elements of returned |
| * packages) |
| */ |
| Info->ReturnBtype = AcpiNsGetBitmappedType (ReturnObject); |
| if (Info->ReturnBtype == ACPI_RTYPE_ANY) |
| { |
| /* Not one of the supported objects, must be incorrect */ |
| goto TypeErrorExit; |
| } |
| |
| /* For reference objects, check that the reference type is correct */ |
| |
| if ((Info->ReturnBtype & ExpectedBtypes) == ACPI_RTYPE_REFERENCE) |
| { |
| Status = AcpiNsCheckReference (Info, ReturnObject); |
| return (Status); |
| } |
| |
| /* Attempt simple repair of the returned object if necessary */ |
| |
| Status = AcpiNsSimpleRepair (Info, ExpectedBtypes, |
| PackageIndex, ReturnObjectPtr); |
| if (ACPI_SUCCESS (Status)) |
| { |
| return (AE_OK); /* Successful repair */ |
| } |
| |
| |
| TypeErrorExit: |
| |
| /* Create a string with all expected types for this predefined object */ |
| |
| AcpiUtGetExpectedReturnTypes (TypeBuffer, ExpectedBtypes); |
| |
| if (!ReturnObject) |
| { |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, |
| "Expected return object of type %s", |
| TypeBuffer)); |
| } |
| else if (PackageIndex == ACPI_NOT_PACKAGE_ELEMENT) |
| { |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, |
| "Return type mismatch - found %s, expected %s", |
| AcpiUtGetObjectTypeName (ReturnObject), TypeBuffer)); |
| } |
| else |
| { |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, |
| "Return Package type mismatch at index %u - " |
| "found %s, expected %s", PackageIndex, |
| AcpiUtGetObjectTypeName (ReturnObject), TypeBuffer)); |
| } |
| |
| return (AE_AML_OPERAND_TYPE); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsCheckReference |
| * |
| * PARAMETERS: Info - Method execution information block |
| * ReturnObject - Object returned from the evaluation of a |
| * method or object |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Check a returned reference object for the correct reference |
| * type. The only reference type that can be returned from a |
| * predefined method is a named reference. All others are invalid. |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiNsCheckReference ( |
| ACPI_EVALUATE_INFO *Info, |
| ACPI_OPERAND_OBJECT *ReturnObject) |
| { |
| |
| /* |
| * Check the reference object for the correct reference type (opcode). |
| * The only type of reference that can be converted to an ACPI_OBJECT is |
| * a reference to a named object (reference class: NAME) |
| */ |
| if (ReturnObject->Reference.Class == ACPI_REFCLASS_NAME) |
| { |
| return (AE_OK); |
| } |
| |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, |
| "Return type mismatch - unexpected reference object type [%s] %2.2X", |
| AcpiUtGetReferenceName (ReturnObject), |
| ReturnObject->Reference.Class)); |
| |
| return (AE_AML_OPERAND_TYPE); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsGetBitmappedType |
| * |
| * PARAMETERS: ReturnObject - Object returned from method/obj evaluation |
| * |
| * RETURN: Object return type. ACPI_RTYPE_ANY indicates that the object |
| * type is not supported. ACPI_RTYPE_NONE indicates that no |
| * object was returned (ReturnObject is NULL). |
| * |
| * DESCRIPTION: Convert object type into a bitmapped object return type. |
| * |
| ******************************************************************************/ |
| |
| static UINT32 |
| AcpiNsGetBitmappedType ( |
| ACPI_OPERAND_OBJECT *ReturnObject) |
| { |
| UINT32 ReturnBtype; |
| |
| |
| if (!ReturnObject) |
| { |
| return (ACPI_RTYPE_NONE); |
| } |
| |
| /* Map ACPI_OBJECT_TYPE to internal bitmapped type */ |
| |
| switch (ReturnObject->Common.Type) |
| { |
| case ACPI_TYPE_INTEGER: |
| |
| ReturnBtype = ACPI_RTYPE_INTEGER; |
| break; |
| |
| case ACPI_TYPE_BUFFER: |
| |
| ReturnBtype = ACPI_RTYPE_BUFFER; |
| break; |
| |
| case ACPI_TYPE_STRING: |
| |
| ReturnBtype = ACPI_RTYPE_STRING; |
| break; |
| |
| case ACPI_TYPE_PACKAGE: |
| |
| ReturnBtype = ACPI_RTYPE_PACKAGE; |
| break; |
| |
| case ACPI_TYPE_LOCAL_REFERENCE: |
| |
| ReturnBtype = ACPI_RTYPE_REFERENCE; |
| break; |
| |
| default: |
| |
| /* Not one of the supported objects, must be incorrect */ |
| |
| ReturnBtype = ACPI_RTYPE_ANY; |
| break; |
| } |
| |
| return (ReturnBtype); |
| } |