blob: 49146f5975453e7d954590ffe707b774f1194327 [file] [log] [blame]
/******************************************************************************
*
* Module Name: cvparser - Converter functions that are called from the AML
* parser.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2020, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include "aslcompiler.h"
#include "acparser.h"
#include "acdispat.h"
#include "amlcode.h"
#include "acinterp.h"
#include "acdisasm.h"
#include "acconvert.h"
/* local prototypes */
static BOOLEAN
CvCommentExists (
UINT8 *Address);
static BOOLEAN
CvIsFilename (
char *Filename);
static ACPI_FILE_NODE*
CvFileAddressLookup(
char *Address,
ACPI_FILE_NODE *Head);
static void
CvAddToFileTree (
char *Filename,
char *PreviousFilename);
static void
CvSetFileParent (
char *ChildFile,
char *ParentFile);
/*******************************************************************************
*
* FUNCTION: CvIsFilename
*
* PARAMETERS: filename - input filename
*
* RETURN: BOOLEAN - TRUE if all characters are between 0x20 and 0x7f
*
* DESCRIPTION: Take a given char * and see if it contains all printable
* characters. If all characters have hexvalues 20-7f and ends with
* .dsl, we will assume that it is a proper filename.
*
******************************************************************************/
static BOOLEAN
CvIsFilename (
char *Filename)
{
UINT64 Length = strlen(Filename);
char *FileExt = Filename + Length - 4;
UINT64 i;
if ((Length > 4) && AcpiUtStricmp (FileExt, ".dsl"))
{
return (FALSE);
}
for(i = 0; i<Length; ++i)
{
if (!isprint ((int) Filename[i]))
{
return (FALSE);
}
}
return (TRUE);
}
/*******************************************************************************
*
* FUNCTION: CvInitFileTree
*
* PARAMETERS: Table - input table
* AmlStart - Address of the starting point of the AML.
* AmlLength - Length of the AML file.
*
* RETURN: None
*
* DESCRIPTION: Initialize the file dependency tree by scanning the AML.
* This is referred as ASL_CV_INIT_FILETREE.
*
******************************************************************************/
void
CvInitFileTree (
ACPI_TABLE_HEADER *Table,
UINT8 *AmlStart,
UINT32 AmlLength)
{
UINT8 *TreeAml;
UINT8 *FileEnd;
char *Filename = NULL;
char *PreviousFilename = NULL;
char *ParentFilename = NULL;
char *ChildFilename = NULL;
if (!AcpiGbl_CaptureComments)
{
return;
}
CvDbgPrint ("AmlLength: %x\n", AmlLength);
CvDbgPrint ("AmlStart: %p\n", AmlStart);
CvDbgPrint ("AmlEnd?: %p\n", AmlStart+AmlLength);
AcpiGbl_FileTreeRoot = AcpiOsAcquireObject (AcpiGbl_FileCache);
AcpiGbl_FileTreeRoot->FileStart = (char *)(AmlStart);
AcpiGbl_FileTreeRoot->FileEnd = (char *)(AmlStart + Table->Length);
AcpiGbl_FileTreeRoot->Next = NULL;
AcpiGbl_FileTreeRoot->Parent = NULL;
AcpiGbl_FileTreeRoot->Filename = (char *)(AmlStart+2);
/* Set the root file to the current open file */
AcpiGbl_FileTreeRoot->File = AcpiGbl_OutputFile;
/*
* Set this to true because we don't need to output
* an include statement for the topmost file
*/
AcpiGbl_FileTreeRoot->IncludeWritten = TRUE;
Filename = NULL;
AcpiGbl_CurrentFilename = (char *)(AmlStart+2);
AcpiGbl_RootFilename = (char *)(AmlStart+2);
TreeAml = AmlStart;
FileEnd = AmlStart + AmlLength;
while (TreeAml <= FileEnd)
{
/*
* Make sure that this filename contains all printable characters
* and a .dsl extension at the end. If not, then it must be some
* raw data that doesn't outline a filename.
*/
if ((*TreeAml == AML_COMMENT_OP) &&
(*(TreeAml +1) == FILENAME_COMMENT) &&
(CvIsFilename ((char *)(TreeAml +2))))
{
CvDbgPrint ("A9 and a 08 file\n");
PreviousFilename = Filename;
Filename = (char *) (TreeAml +2);
CvAddToFileTree (Filename, PreviousFilename);
ChildFilename = Filename;
CvDbgPrint ("%s\n", Filename);
}
else if ((*TreeAml == AML_COMMENT_OP) &&
(*(TreeAml +1) == PARENTFILENAME_COMMENT) &&
(CvIsFilename ((char *)(TreeAml +2))))
{
CvDbgPrint ("A9 and a 09 file\n");
ParentFilename = (char *)(TreeAml +2);
CvSetFileParent (ChildFilename, ParentFilename);
CvDbgPrint ("%s\n", ParentFilename);
}
++TreeAml;
}
}
/*******************************************************************************
*
* FUNCTION: CvClearOpComments
*
* PARAMETERS: Op -- clear all comments within this Op
*
* RETURN: None
*
* DESCRIPTION: Clear all converter-related fields of the given Op.
* This is referred as ASL_CV_CLEAR_OP_COMMENTS.
*
******************************************************************************/
void
CvClearOpComments (
ACPI_PARSE_OBJECT *Op)
{
Op->Common.InlineComment = NULL;
Op->Common.EndNodeComment = NULL;
Op->Common.NameComment = NULL;
Op->Common.CommentList = NULL;
Op->Common.EndBlkComment = NULL;
Op->Common.CloseBraceComment = NULL;
Op->Common.CvFilename = NULL;
Op->Common.CvParentFilename = NULL;
}
/*******************************************************************************
*
* FUNCTION: CvCommentExists
*
* PARAMETERS: Address - check if this address appears in the list
*
* RETURN: BOOLEAN - TRUE if the address exists.
*
* DESCRIPTION: Look at the pointer address and check if this appears in the
* list of all addresses. If it exists in the list, return TRUE
* if it exists. Otherwise add to the list and return FALSE.
*
******************************************************************************/
static BOOLEAN
CvCommentExists (
UINT8 *Address)
{
ACPI_COMMENT_ADDR_NODE *Current = AcpiGbl_CommentAddrListHead;
UINT8 Option;
if (!Address)
{
return (FALSE);
}
Option = *(Address + 1);
/*
* FILENAME_COMMENT and PARENTFILENAME_COMMENT are not treated as
* comments. They serve as markers for where the file starts and ends.
*/
if ((Option == FILENAME_COMMENT) ||
(Option == PARENTFILENAME_COMMENT))
{
return (FALSE);
}
if (!Current)
{
AcpiGbl_CommentAddrListHead =
AcpiOsAcquireObject (AcpiGbl_RegCommentCache);
AcpiGbl_CommentAddrListHead->Addr = Address;
AcpiGbl_CommentAddrListHead->Next = NULL;
return (FALSE);
}
else
{
while (Current)
{
if (Current->Addr != Address)
{
Current = Current->Next;
}
else
{
return (TRUE);
}
}
/*
* If the execution gets to this point, it means that this
* address does not exists in the list. Add this address to the
* beginning of the list.
*/
Current = AcpiGbl_CommentAddrListHead;
AcpiGbl_CommentAddrListHead =
AcpiOsAcquireObject (AcpiGbl_RegCommentCache);
AcpiGbl_CommentAddrListHead->Addr = Address;
AcpiGbl_CommentAddrListHead->Next = Current;
return (FALSE);
}
}
/*******************************************************************************
*
* FUNCTION: CvFilenameExists
*
* PARAMETERS: Filename - filename to search
*
* RETURN: ACPI_FILE_NODE - a pointer to a file node
*
* DESCRIPTION: Look for the given filename in the file dependency tree.
* Returns the file node if it exists, returns NULL if it does not.
*
******************************************************************************/
ACPI_FILE_NODE*
CvFilenameExists(
char *Filename,
ACPI_FILE_NODE *Head)
{
ACPI_FILE_NODE *Current = Head;
if (!Filename)
{
return (NULL);
}
while (Current)
{
if (!AcpiUtStricmp (Current->Filename, Filename))
{
return (Current);
}
Current = Current->Next;
}
return (NULL);
}
/*******************************************************************************
*
* FUNCTION: CvFileAddressLookup
*
* PARAMETERS: Address - address to look up
* Head - file dependency tree
*
* RETURN: ACPI_FILE_NODE - pointer to a file node containing the address
*
* DESCRIPTION: Look for the given address in the file dependency tree.
* Returns the first file node where the given address is within
* the file node's starting and ending address.
*
******************************************************************************/
static ACPI_FILE_NODE *
CvFileAddressLookup(
char *Address,
ACPI_FILE_NODE *Head)
{
ACPI_FILE_NODE *Current = Head;
while (Current)
{
if ((Address >= Current->FileStart) &&
(Address < Current->FileEnd ||
!Current->FileEnd))
{
return (Current);
}
Current = Current->Next;
}
return (NULL);
}
/*******************************************************************************
*
* FUNCTION: CvLabelFileNode
*
* PARAMETERS: Op
*
* RETURN: None
*
* DESCRIPTION: Takes a given parse op, looks up its Op->Common.Aml field
* within the file tree and fills in appropriate file information
* from a matching node within the tree.
* This is referred as ASL_CV_LABEL_FILENODE.
*
******************************************************************************/
void
CvLabelFileNode(
ACPI_PARSE_OBJECT *Op)
{
ACPI_FILE_NODE *Node;
if (!Op)
{
return;
}
Node = CvFileAddressLookup ((char *)
Op->Common.Aml, AcpiGbl_FileTreeRoot);
if (!Node)
{
return;
}
Op->Common.CvFilename = Node->Filename;
if (Node->Parent)
{
Op->Common.CvParentFilename = Node->Parent->Filename;
}
else
{
Op->Common.CvParentFilename = Node->Filename;
}
}
/*******************************************************************************
*
* FUNCTION: CvAddToFileTree
*
* PARAMETERS: Filename - Address containing the name of the current
* filename
* PreviousFilename - Address containing the name of the previous
* filename
*
* RETURN: None
*
* DESCRIPTION: Add this filename to the AcpiGbl_FileTree if it does not exist.
*
******************************************************************************/
static void
CvAddToFileTree (
char *Filename,
char *PreviousFilename)
{
ACPI_FILE_NODE *Node;
if (!AcpiUtStricmp(Filename, AcpiGbl_RootFilename) &&
PreviousFilename)
{
Node = CvFilenameExists (PreviousFilename, AcpiGbl_FileTreeRoot);
if (Node)
{
/*
* Set the end point of the PreviousFilename to the address
* of Filename.
*/
Node->FileEnd = Filename;
}
}
else if (!AcpiUtStricmp(Filename, AcpiGbl_RootFilename) &&
!PreviousFilename)
{
return;
}
Node = CvFilenameExists (Filename, AcpiGbl_FileTreeRoot);
if (Node && PreviousFilename)
{
/*
* Update the end of the previous file and all of their parents'
* ending addresses. This is done to ensure that parent file
* ranges extend to the end of their childrens' files.
*/
Node = CvFilenameExists (PreviousFilename, AcpiGbl_FileTreeRoot);
if (Node && (Node->FileEnd < Filename))
{
Node->FileEnd = Filename;
Node = Node->Parent;
while (Node)
{
if (Node->FileEnd < Filename)
{
Node->FileEnd = Filename;
}
Node = Node->Parent;
}
}
}
else
{
Node = AcpiGbl_FileTreeRoot;
AcpiGbl_FileTreeRoot = AcpiOsAcquireObject (AcpiGbl_FileCache);
AcpiGbl_FileTreeRoot->Next = Node;
AcpiGbl_FileTreeRoot->Parent = NULL;
AcpiGbl_FileTreeRoot->Filename = Filename;
AcpiGbl_FileTreeRoot->FileStart = Filename;
AcpiGbl_FileTreeRoot->IncludeWritten = FALSE;
AcpiGbl_FileTreeRoot->File = fopen(Filename, "w+");
/*
* If we can't open the file, we need to abort here before we
* accidentally write to a NULL file.
*/
if (!AcpiGbl_FileTreeRoot->File)
{
/* delete the .xxx file */
FlDeleteFile (ASL_FILE_AML_OUTPUT);
sprintf (AslGbl_MsgBuffer, "\"%s\" - %s", Filename, strerror (errno));
AslCommonError (ASL_ERROR, ASL_MSG_OPEN, 0, 0, 0, 0,
NULL, AslGbl_MsgBuffer);
AslAbort ();
}
}
}
/*******************************************************************************
*
* FUNCTION: CvSetFileParent
*
* PARAMETERS: ChildFile - contains the filename of the child file
* ParentFile - contains the filename of the parent file.
*
* RETURN: None
*
* DESCRIPTION: Point the parent pointer of the Child to the node that
* corresponds with the parent file node.
*
******************************************************************************/
static void
CvSetFileParent (
char *ChildFile,
char *ParentFile)
{
ACPI_FILE_NODE *Child;
ACPI_FILE_NODE *Parent;
Child = CvFilenameExists (ChildFile, AcpiGbl_FileTreeRoot);
Parent = CvFilenameExists (ParentFile, AcpiGbl_FileTreeRoot);
if (Child && Parent)
{
Child->Parent = Parent;
while (Child->Parent)
{
if (Child->Parent->FileEnd < Child->FileStart)
{
Child->Parent->FileEnd = Child->FileStart;
}
Child = Child->Parent;
}
}
}
/*******************************************************************************
*
* FUNCTION: CvCaptureCommentsOnly
*
* PARAMETERS: ParserState - A parser state object
*
* RETURN: None
*
* DESCRIPTION: Look at the aml that the parser state is pointing to,
* capture any AML_COMMENT_OP and it's arguments and increment the
* aml pointer past the comment. Comments are transferred to parse
* nodes through CvTransferComments() as well as
* AcpiPsBuildNamedOp().
* This is referred as ASL_CV_CAPTURE_COMMENTS_ONLY.
*
******************************************************************************/
void
CvCaptureCommentsOnly (
ACPI_PARSE_STATE *ParserState)
{
UINT8 *Aml = ParserState->Aml;
UINT16 Opcode = (UINT16) ACPI_GET8 (Aml);
UINT32 Length = 0;
UINT8 CommentOption;
BOOLEAN StdDefBlockFlag = FALSE;
ACPI_COMMENT_NODE *CommentNode;
ACPI_FILE_NODE *FileNode;
if (!AcpiGbl_CaptureComments ||
Opcode != AML_COMMENT_OP)
{
return;
}
while (Opcode == AML_COMMENT_OP)
{
CvDbgPrint ("comment aml address: %p\n", Aml);
if (CvCommentExists(ParserState->Aml))
{
CvDbgPrint ("Avoiding capturing an existing comment.\n");
}
else
{
CommentOption = *(Aml +1);
/*
* Increment past the comment option and point the
* appropriate char pointers
*/
Aml += 2;
/* Found a comment. Now, set pointers to these comments. */
switch (CommentOption)
{
case STD_DEFBLK_COMMENT:
StdDefBlockFlag = TRUE;
/*
* Add to a linked list of nodes. This list will be
* taken by the parse node created next.
*/
CommentNode = AcpiOsAcquireObject (
AcpiGbl_RegCommentCache);
CommentNode->Comment = ACPI_CAST_PTR (char, Aml);
CommentNode->Next = NULL;
if (!AcpiGbl_DefBlkCommentListHead)
{
AcpiGbl_DefBlkCommentListHead = CommentNode;
AcpiGbl_DefBlkCommentListTail = CommentNode;
}
else
{
AcpiGbl_DefBlkCommentListTail->Next = CommentNode;
AcpiGbl_DefBlkCommentListTail =
AcpiGbl_DefBlkCommentListTail->Next;
}
break;
case STANDARD_COMMENT:
CvDbgPrint ("found regular comment.\n");
/*
* Add to a linked list of nodes. This list will be
* taken by the parse node created next.
*/
CommentNode = AcpiOsAcquireObject (
AcpiGbl_RegCommentCache);
CommentNode->Comment = ACPI_CAST_PTR (char, Aml);
CommentNode->Next = NULL;
if (!AcpiGbl_RegCommentListHead)
{
AcpiGbl_RegCommentListHead = CommentNode;
AcpiGbl_RegCommentListTail = CommentNode;
}
else
{
AcpiGbl_RegCommentListTail->Next = CommentNode;
AcpiGbl_RegCommentListTail =
AcpiGbl_RegCommentListTail->Next;
}
break;
case ENDBLK_COMMENT:
CvDbgPrint ("found endblk comment.\n");
/* Add to a linked list of nodes. This will be
* taken by the next created parse node.
*/
CommentNode = AcpiOsAcquireObject (
AcpiGbl_RegCommentCache);
CommentNode->Comment = ACPI_CAST_PTR (char, Aml);
CommentNode->Next = NULL;
if (!AcpiGbl_EndBlkCommentListHead)
{
AcpiGbl_EndBlkCommentListHead = CommentNode;
AcpiGbl_EndBlkCommentListTail = CommentNode;
}
else
{
AcpiGbl_EndBlkCommentListTail->Next = CommentNode;
AcpiGbl_EndBlkCommentListTail =
AcpiGbl_EndBlkCommentListTail->Next;
}
break;
case INLINE_COMMENT:
CvDbgPrint ("found inline comment.\n");
AcpiGbl_CurrentInlineComment =
ACPI_CAST_PTR (char, Aml);
break;
case ENDNODE_COMMENT:
CvDbgPrint ("found EndNode comment.\n");
AcpiGbl_CurrentEndNodeComment =
ACPI_CAST_PTR (char, Aml);
break;
case CLOSE_BRACE_COMMENT:
CvDbgPrint ("found close brace comment.\n");
AcpiGbl_CurrentCloseBraceComment =
ACPI_CAST_PTR (char, Aml);
break;
case END_DEFBLK_COMMENT:
CvDbgPrint ("Found comment that belongs after"
" the } for a definition block.\n");
AcpiGbl_CurrentScope->Common.CloseBraceComment =
ACPI_CAST_PTR (char, Aml);
break;
case FILENAME_COMMENT:
CvDbgPrint ("Found a filename: %s\n",
ACPI_CAST_PTR (char, Aml));
FileNode = CvFilenameExists (
ACPI_CAST_PTR (char, Aml), AcpiGbl_FileTreeRoot);
/*
* If there is an INCLUDE_COMMENT followed by a
* FILENAME_COMMENT, then the INCLUDE_COMMENT is a comment
* that is emitted before the #include for the file.
* We will save the IncludeComment within the FileNode
* associated with this FILENAME_COMMENT.
*/
if (FileNode && AcpiGbl_IncCommentListHead)
{
FileNode->IncludeComment = AcpiGbl_IncCommentListHead;
AcpiGbl_IncCommentListHead = NULL;
AcpiGbl_IncCommentListTail = NULL;
}
break;
case PARENTFILENAME_COMMENT:
CvDbgPrint (" Found a parent filename.\n");
break;
case INCLUDE_COMMENT:
/*
* Add to a linked list. This list will be taken by the
* parse node created next. See the FILENAME_COMMENT case
* for more details
*/
CommentNode = AcpiOsAcquireObject (
AcpiGbl_RegCommentCache);
CommentNode->Comment = ACPI_CAST_PTR (char, Aml);
CommentNode->Next = NULL;
if (!AcpiGbl_IncCommentListHead)
{
AcpiGbl_IncCommentListHead = CommentNode;
AcpiGbl_IncCommentListTail = CommentNode;
}
else
{
AcpiGbl_IncCommentListTail->Next = CommentNode;
AcpiGbl_IncCommentListTail =
AcpiGbl_IncCommentListTail->Next;
}
CvDbgPrint ("Found a include comment: %s\n",
CommentNode->Comment);
break;
default:
/* Not a valid comment option. Revert the AML */
goto DefBlock;
} /* End switch statement */
} /* End else */
/* Determine the length and move forward that amount */
Length = 0;
while (ParserState->Aml[Length])
{
Length++;
}
ParserState->Aml += Length + 1;
/* Peek at the next Opcode. */
Aml = ParserState->Aml;
Opcode = (UINT16) ACPI_GET8 (Aml);
}
DefBlock:
if (StdDefBlockFlag)
{
/*
* Give all of its comments to the current scope, which is known as
* the definition block, since STD_DEFBLK_COMMENT only appears after
* definition block headers.
*/
AcpiGbl_CurrentScope->Common.CommentList
= AcpiGbl_DefBlkCommentListHead;
AcpiGbl_DefBlkCommentListHead = NULL;
AcpiGbl_DefBlkCommentListTail = NULL;
}
}
/*******************************************************************************
*
* FUNCTION: CvCaptureComments
*
* PARAMETERS: ParserState - A parser state object
*
* RETURN: None
*
* DESCRIPTION: Wrapper function for CvCaptureCommentsOnly
* This is referred as ASL_CV_CAPTURE_COMMENTS.
*
******************************************************************************/
void
CvCaptureComments (
ACPI_WALK_STATE *WalkState)
{
UINT8 *Aml;
UINT16 Opcode;
const ACPI_OPCODE_INFO *OpInfo;
if (!AcpiGbl_CaptureComments)
{
return;
}
/*
* Before parsing, check to see that comments that come directly
* after deferred opcodes aren't being processed.
*/
Aml = WalkState->ParserState.Aml;
Opcode = (UINT16) ACPI_GET8 (Aml);
OpInfo = AcpiPsGetOpcodeInfo (Opcode);
if (!(OpInfo->Flags & AML_DEFER) ||
((OpInfo->Flags & AML_DEFER) &&
(WalkState->PassNumber != ACPI_IMODE_LOAD_PASS1)))
{
CvCaptureCommentsOnly (&WalkState->ParserState);
WalkState->Aml = WalkState->ParserState.Aml;
}
}
/*******************************************************************************
*
* FUNCTION: CvTransferComments
*
* PARAMETERS: Op - Transfer comments to this Op
*
* RETURN: None
*
* DESCRIPTION: Transfer all of the comments stored in global containers to the
* given Op. This will be invoked shortly after the parser creates
* a ParseOp.
* This is referred as ASL_CV_TRANSFER_COMMENTS.
*
******************************************************************************/
void
CvTransferComments (
ACPI_PARSE_OBJECT *Op)
{
Op->Common.InlineComment = AcpiGbl_CurrentInlineComment;
AcpiGbl_CurrentInlineComment = NULL;
Op->Common.EndNodeComment = AcpiGbl_CurrentEndNodeComment;
AcpiGbl_CurrentEndNodeComment = NULL;
Op->Common.CloseBraceComment = AcpiGbl_CurrentCloseBraceComment;
AcpiGbl_CurrentCloseBraceComment = NULL;
Op->Common.CommentList = AcpiGbl_RegCommentListHead;
AcpiGbl_RegCommentListHead = NULL;
AcpiGbl_RegCommentListTail = NULL;
Op->Common.EndBlkComment = AcpiGbl_EndBlkCommentListHead;
AcpiGbl_EndBlkCommentListHead = NULL;
AcpiGbl_EndBlkCommentListTail = NULL;
}