| /****************************************************************************** |
| * |
| * Module Name: dmtbinfo3 - Table info for non-AML tables |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2020, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include "acpi.h" |
| #include "accommon.h" |
| #include "acdisasm.h" |
| #include "actbinfo.h" |
| |
| /* This module used for application-level code only */ |
| |
| #define _COMPONENT ACPI_CA_DISASSEMBLER |
| ACPI_MODULE_NAME ("dmtbinfo3") |
| |
| /* |
| * How to add a new table: |
| * |
| * - Add the C table definition to the actbl1.h or actbl2.h header. |
| * - Add ACPI_xxxx_OFFSET macro(s) for the table (and subtables) to list below. |
| * - Define the table in this file (for the disassembler). If any |
| * new data types are required (ACPI_DMT_*), see below. |
| * - Add an external declaration for the new table definition (AcpiDmTableInfo*) |
| * in acdisam.h |
| * - Add new table definition to the dispatch table in dmtable.c (AcpiDmTableData) |
| * If a simple table (with no subtables), no disassembly code is needed. |
| * Otherwise, create the AcpiDmDump* function for to disassemble the table |
| * and add it to the dmtbdump.c file. |
| * - Add an external declaration for the new AcpiDmDump* function in acdisasm.h |
| * - Add the new AcpiDmDump* function to the dispatch table in dmtable.c |
| * - Create a template for the new table |
| * - Add data table compiler support |
| * |
| * How to add a new data type (ACPI_DMT_*): |
| * |
| * - Add new type at the end of the ACPI_DMT list in acdisasm.h |
| * - Add length and implementation cases in dmtable.c (disassembler) |
| * - Add type and length cases in dtutils.c (DT compiler) |
| */ |
| |
| /* |
| * ACPI Table Information, used to dump formatted ACPI tables |
| * |
| * Each entry is of the form: <Field Type, Field Offset, Field Name> |
| */ |
| |
| /******************************************************************************* |
| * |
| * SLIC - Software Licensing Description Table. This table contains the standard |
| * ACPI header followed by proprietary data structures |
| * |
| ******************************************************************************/ |
| |
| /* Single subtable, a proprietary format, so treat it as a buffer */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSlic[] = |
| { |
| {ACPI_DMT_RAW_BUFFER, 0, "Software Licensing Structure", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * SLIT - System Locality Information Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSlit[] = |
| { |
| {ACPI_DMT_UINT64, ACPI_SLIT_OFFSET (LocalityCount), "Localities", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * SPCR - Serial Port Console Redirection table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSpcr[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (InterfaceType), "Interface Type", 0}, |
| {ACPI_DMT_UINT24, ACPI_SPCR_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_SPCR_OFFSET (SerialPort), "Serial Port Register", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (InterruptType), "Interrupt Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (PcInterrupt), "PCAT-compatible IRQ", 0}, |
| {ACPI_DMT_UINT32, ACPI_SPCR_OFFSET (Interrupt), "Interrupt", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (BaudRate), "Baud Rate", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (Parity), "Parity", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (StopBits), "Stop Bits", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (FlowControl), "Flow Control", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (TerminalType), "Terminal Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (Reserved2), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_SPCR_OFFSET (PciDeviceId), "PCI Device ID", 0}, |
| {ACPI_DMT_UINT16, ACPI_SPCR_OFFSET (PciVendorId), "PCI Vendor ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (PciBus), "PCI Bus", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (PciDevice), "PCI Device", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (PciFunction), "PCI Function", 0}, |
| {ACPI_DMT_UINT32, ACPI_SPCR_OFFSET (PciFlags), "PCI Flags", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPCR_OFFSET (PciSegment), "PCI Segment", 0}, |
| {ACPI_DMT_UINT32, ACPI_SPCR_OFFSET (Reserved2), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * SPMI - Server Platform Management Interface table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSpmi[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (InterfaceType), "Interface Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (Reserved), "Reserved", DT_NON_ZERO}, /* Value must be 1 */ |
| {ACPI_DMT_UINT16, ACPI_SPMI_OFFSET (SpecRevision), "IPMI Spec Version", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (InterruptType), "Interrupt Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (GpeNumber), "GPE Number", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (Reserved1), "Reserved", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (PciDeviceFlag), "PCI Device Flag", 0}, |
| {ACPI_DMT_UINT32, ACPI_SPMI_OFFSET (Interrupt), "Interrupt", 0}, |
| {ACPI_DMT_GAS, ACPI_SPMI_OFFSET (IpmiRegister), "IPMI Register", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (PciSegment), "PCI Segment", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (PciBus), "PCI Bus", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (PciDevice), "PCI Device", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (PciFunction), "PCI Function", 0}, |
| {ACPI_DMT_UINT8, ACPI_SPMI_OFFSET (Reserved2), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * SRAT - System Resource Affinity Table and Subtables |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_SRAT_OFFSET (TableRevision), "Table Revision", 0}, |
| {ACPI_DMT_UINT64, ACPI_SRAT_OFFSET (Reserved), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Common Subtable header (one per Subtable) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSratHdr[] = |
| { |
| {ACPI_DMT_SRAT, ACPI_SRATH_OFFSET (Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_SRATH_OFFSET (Length), "Length", DT_LENGTH}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* SRAT Subtables */ |
| |
| /* 0: Processor Local APIC/SAPIC Affinity */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_SRAT0_OFFSET (ProximityDomainLo), "Proximity Domain Low(8)", 0}, |
| {ACPI_DMT_UINT8, ACPI_SRAT0_OFFSET (ApicId), "Apic ID", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT0_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_SRAT0_FLAG_OFFSET (Flags,0), "Enabled", 0}, |
| {ACPI_DMT_UINT8, ACPI_SRAT0_OFFSET (LocalSapicEid), "Local Sapic EID", 0}, |
| {ACPI_DMT_UINT24, ACPI_SRAT0_OFFSET (ProximityDomainHi[0]), "Proximity Domain High(24)", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT0_OFFSET (ClockDomain), "Clock Domain", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1: Memory Affinity */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat1[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_SRAT1_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| {ACPI_DMT_UINT16, ACPI_SRAT1_OFFSET (Reserved), "Reserved1", 0}, |
| {ACPI_DMT_UINT64, ACPI_SRAT1_OFFSET (BaseAddress), "Base Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_SRAT1_OFFSET (Length), "Address Length", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT1_OFFSET (Reserved1), "Reserved2", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT1_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_SRAT1_FLAG_OFFSET (Flags,0), "Enabled", 0}, |
| {ACPI_DMT_FLAG1, ACPI_SRAT1_FLAG_OFFSET (Flags,0), "Hot Pluggable", 0}, |
| {ACPI_DMT_FLAG2, ACPI_SRAT1_FLAG_OFFSET (Flags,0), "Non-Volatile", 0}, |
| {ACPI_DMT_UINT64, ACPI_SRAT1_OFFSET (Reserved2), "Reserved3", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat2[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_SRAT2_OFFSET (Reserved), "Reserved1", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT2_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT2_OFFSET (ApicId), "Apic ID", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT2_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_SRAT2_FLAG_OFFSET (Flags,0), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT2_OFFSET (ClockDomain), "Clock Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT2_OFFSET (Reserved2), "Reserved2", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 3: GICC Affinity (ACPI 5.1) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat3[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_SRAT3_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT3_OFFSET (AcpiProcessorUid), "Acpi Processor UID", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT3_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_SRAT3_FLAG_OFFSET (Flags,0), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT3_OFFSET (ClockDomain), "Clock Domain", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 4: GCC ITS Affinity (ACPI 6.2) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat4[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_SRAT4_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| {ACPI_DMT_UINT16, ACPI_SRAT4_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT4_OFFSET (ItsId), "ITS ID", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 5: Generic Initiator Affinity Structure (ACPI 6.3) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoSrat5[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_SRAT5_OFFSET (Reserved), "Reserved1", 0}, |
| {ACPI_DMT_UINT8, ACPI_SRAT5_OFFSET (DeviceHandleType), "Device Handle Type", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT5_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| {ACPI_DMT_BUF16, ACPI_SRAT5_OFFSET (DeviceHandle), "Device Handle", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT5_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_SRAT5_FLAG_OFFSET (Flags,0), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_SRAT5_OFFSET (Reserved1), "Reserved2", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * STAO - Status Override Table (_STA override) - ACPI 6.0 |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoStao[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_STAO_OFFSET (IgnoreUart), "Ignore UART", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoStaoStr[] = |
| { |
| {ACPI_DMT_STRING, 0, "Namepath", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * TCPA - Trusted Computing Platform Alliance table (Client) |
| * |
| * NOTE: There are two versions of the table with the same signature -- |
| * the client version and the server version. The common PlatformClass |
| * field is used to differentiate the two types of tables. |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTcpaHdr[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_TCPA_OFFSET (PlatformClass), "Platform Class", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTcpaClient[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_TCPA_CLIENT_OFFSET (MinimumLogLength), "Min Event Log Length", 0}, |
| {ACPI_DMT_UINT64, ACPI_TCPA_CLIENT_OFFSET (LogAddress), "Event Log Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTcpaServer[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_TCPA_SERVER_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_TCPA_SERVER_OFFSET (MinimumLogLength), "Min Event Log Length", 0}, |
| {ACPI_DMT_UINT64, ACPI_TCPA_SERVER_OFFSET (LogAddress), "Event Log Address", 0}, |
| {ACPI_DMT_UINT16, ACPI_TCPA_SERVER_OFFSET (SpecRevision), "Specification Revision", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (DeviceFlags), "Device Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_TCPA_SERVER_OFFSET (DeviceFlags), "Pci Device", 0}, |
| {ACPI_DMT_FLAG1, ACPI_TCPA_SERVER_OFFSET (DeviceFlags), "Bus is Pnp", 0}, |
| {ACPI_DMT_FLAG2, ACPI_TCPA_SERVER_OFFSET (DeviceFlags), "Address Valid", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (InterruptFlags), "Interrupt Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_TCPA_SERVER_OFFSET (InterruptFlags), "Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_TCPA_SERVER_OFFSET (InterruptFlags), "Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_TCPA_SERVER_OFFSET (InterruptFlags), "GPE SCI Triggered", 0}, |
| {ACPI_DMT_FLAG3, ACPI_TCPA_SERVER_OFFSET (InterruptFlags), "Global System Interrupt", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (GpeNumber), "Gpe Number", 0}, |
| {ACPI_DMT_UINT24, ACPI_TCPA_SERVER_OFFSET (Reserved2[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_TCPA_SERVER_OFFSET (GlobalInterrupt), "Global Interrupt", 0}, |
| {ACPI_DMT_GAS, ACPI_TCPA_SERVER_OFFSET (Address), "Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_TCPA_SERVER_OFFSET (Reserved3), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_TCPA_SERVER_OFFSET (ConfigAddress), "Configuration Address", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (Group), "Pci Group", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (Bus), "Pci Bus", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (Device), "Pci Device", 0}, |
| {ACPI_DMT_UINT8, ACPI_TCPA_SERVER_OFFSET (Function), "Pci Function", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table |
| * |
| ******************************************************************************/ |
| |
| /* TPM2 revision 3 */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTpm23[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_TPM23_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_TPM23_OFFSET (ControlAddress), "Control Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_TPM23_OFFSET (StartMethod), "Start Method", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Trailer in the case that StartMethod == 2 */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTpm23a[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_TPM23A_OFFSET (Reserved), "Reserved", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* TPM2 revision 4 */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTpm2[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_TPM2_OFFSET (PlatformClass), "Platform Class", 0}, |
| {ACPI_DMT_UINT16, ACPI_TPM2_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_TPM2_OFFSET (ControlAddress), "Control Address", 0}, |
| {ACPI_DMT_TPM2, ACPI_TPM2_OFFSET (StartMethod), "Start Method", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Optional trailer. LogLength and LogAddress are additionally optional */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTpm2a[] = |
| { |
| {ACPI_DMT_BUF12, ACPI_TPM2A_OFFSET (MethodParameters), "Method Parameters", DT_OPTIONAL}, |
| {ACPI_DMT_UINT32, ACPI_TPM2A_OFFSET (MinimumLogLength), "Minimum Log Length", DT_OPTIONAL}, |
| {ACPI_DMT_UINT64, ACPI_TPM2A_OFFSET (LogAddress), "Log Address", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 11: Start Method for ARM SMC */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoTpm211[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_TPM211_OFFSET (GlobalInterrupt), "Global Interrupt", 0}, |
| {ACPI_DMT_UINT8, ACPI_TPM211_OFFSET (InterruptFlags), "Interrupt Flags", 0}, |
| {ACPI_DMT_UINT8, ACPI_TPM211_OFFSET (OperationFlags), "Operation Flags", 0}, |
| {ACPI_DMT_UINT16, ACPI_TPM211_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_TPM211_OFFSET (FunctionId), "Function ID", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * UEFI - UEFI Boot optimization Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoUefi[] = |
| { |
| {ACPI_DMT_UUID, ACPI_UEFI_OFFSET (Identifier[0]), "UUID Identifier", 0}, |
| {ACPI_DMT_UINT16, ACPI_UEFI_OFFSET (DataOffset), "Data Offset", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * VRTC - Virtual Real Time Clock Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoVrtc[] = |
| { |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* VRTC Subtables - VRTC Entry */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoVrtc0[] = |
| { |
| {ACPI_DMT_GAS, ACPI_VRTC0_OFFSET (PhysicalAddress), "PhysicalAddress", 0}, |
| {ACPI_DMT_UINT32, ACPI_VRTC0_OFFSET (Irq), "IRQ", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WAET - Windows ACPI Emulated devices Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWaet[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_WAET_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_WAET_OFFSET (Flags), "RTC needs no INT ack", 0}, |
| {ACPI_DMT_FLAG1, ACPI_WAET_OFFSET (Flags), "PM timer, one read only", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WDAT - Watchdog Action Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWdat[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_WDAT_OFFSET (HeaderLength), "Header Length", DT_LENGTH}, |
| {ACPI_DMT_UINT16, ACPI_WDAT_OFFSET (PciSegment), "PCI Segment", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDAT_OFFSET (PciBus), "PCI Bus", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDAT_OFFSET (PciDevice), "PCI Device", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDAT_OFFSET (PciFunction), "PCI Function", 0}, |
| {ACPI_DMT_UINT24, ACPI_WDAT_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT_OFFSET (TimerPeriod), "Timer Period", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT_OFFSET (MaxCount), "Max Count", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT_OFFSET (MinCount), "Min Count", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDAT_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_WDAT_OFFSET (Flags), "Enabled", 0}, |
| {ACPI_DMT_FLAG7, ACPI_WDAT_OFFSET (Flags), "Stopped When Asleep", 0}, |
| {ACPI_DMT_UINT24, ACPI_WDAT_OFFSET (Reserved2[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT_OFFSET (Entries), "Watchdog Entry Count", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* WDAT Subtables - Watchdog Instruction Entries */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWdat0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_WDAT0_OFFSET (Action), "Watchdog Action", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDAT0_OFFSET (Instruction), "Instruction", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDAT0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_WDAT0_OFFSET (RegisterRegion), "Register Region", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT0_OFFSET (Value), "Value", 0}, |
| {ACPI_DMT_UINT32, ACPI_WDAT0_OFFSET (Mask), "Register Mask", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WDDT - Watchdog Description Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWddt[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (SpecVersion), "Specification Version", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (TableVersion), "Table Version", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (PciVendorId), "PCI Vendor ID", 0}, |
| {ACPI_DMT_GAS, ACPI_WDDT_OFFSET (Address), "Timer Register", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (MaxCount), "Max Count", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (MinCount), "Min Count", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (Period), "Period", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (Status), "Status (decoded below)", 0}, |
| |
| /* Status Flags byte 0 */ |
| |
| {ACPI_DMT_FLAG0, ACPI_WDDT_FLAG_OFFSET (Status,0), "Available", 0}, |
| {ACPI_DMT_FLAG1, ACPI_WDDT_FLAG_OFFSET (Status,0), "Active", 0}, |
| {ACPI_DMT_FLAG2, ACPI_WDDT_FLAG_OFFSET (Status,0), "OS Owns", 0}, |
| |
| /* Status Flags byte 1 */ |
| |
| {ACPI_DMT_FLAG3, ACPI_WDDT_FLAG_OFFSET (Status,1), "User Reset", 0}, |
| {ACPI_DMT_FLAG4, ACPI_WDDT_FLAG_OFFSET (Status,1), "Timeout Reset", 0}, |
| {ACPI_DMT_FLAG5, ACPI_WDDT_FLAG_OFFSET (Status,1), "Power Fail Reset", 0}, |
| {ACPI_DMT_FLAG6, ACPI_WDDT_FLAG_OFFSET (Status,1), "Unknown Reset", 0}, |
| |
| {ACPI_DMT_UINT16, ACPI_WDDT_OFFSET (Capability), "Capability (decoded below)", 0}, |
| |
| /* Capability Flags byte 0 */ |
| |
| {ACPI_DMT_FLAG0, ACPI_WDDT_FLAG_OFFSET (Capability,0), "Auto Reset", 0}, |
| {ACPI_DMT_FLAG1, ACPI_WDDT_FLAG_OFFSET (Capability,0), "Timeout Alert", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WDRT - Watchdog Resource Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWdrt[] = |
| { |
| {ACPI_DMT_GAS, ACPI_WDRT_OFFSET (ControlRegister), "Control Register", 0}, |
| {ACPI_DMT_GAS, ACPI_WDRT_OFFSET (CountRegister), "Count Register", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDRT_OFFSET (PciDeviceId), "PCI Device ID", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDRT_OFFSET (PciVendorId), "PCI Vendor ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDRT_OFFSET (PciBus), "PCI Bus", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDRT_OFFSET (PciDevice), "PCI Device", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDRT_OFFSET (PciFunction), "PCI Function", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDRT_OFFSET (PciSegment), "PCI Segment", 0}, |
| {ACPI_DMT_UINT16, ACPI_WDRT_OFFSET (MaxCount), "Max Count", 0}, |
| {ACPI_DMT_UINT8, ACPI_WDRT_OFFSET (Units), "Counter Units", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WPBT - Windows Platform Environment Table (ACPI 6.0) |
| * Version 1 |
| * |
| * Conforms to "Windows Platform Binary Table (WPBT)" 29 November 2011 |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWpbt[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_WPBT_OFFSET (HandoffSize), "Handoff Size", 0}, |
| {ACPI_DMT_UINT64, ACPI_WPBT_OFFSET (HandoffAddress), "Handoff Address", 0}, |
| {ACPI_DMT_UINT8, ACPI_WPBT_OFFSET (Layout), "Layout", 0}, |
| {ACPI_DMT_UINT8, ACPI_WPBT_OFFSET (Type), "Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_WPBT_OFFSET (ArgumentsLength), "Arguments Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWpbt0[] = |
| { |
| {ACPI_DMT_UNICODE, sizeof (ACPI_TABLE_WPBT), "Command-line Arguments", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * WSMT - Windows SMM Security Migrations Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoWsmt[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_WSMT_OFFSET (ProtectionFlags), "Protection Flags", 0}, |
| {ACPI_DMT_FLAG0, ACPI_WSMT_FLAG_OFFSET (ProtectionFlags,0), "FIXED_COMM_BUFFERS", 0}, |
| {ACPI_DMT_FLAG1, ACPI_WSMT_FLAG_OFFSET (ProtectionFlags,0), "COMM_BUFFER_NESTED_PTR_PROTECTION", 0}, |
| {ACPI_DMT_FLAG2, ACPI_WSMT_FLAG_OFFSET (ProtectionFlags,0), "SYSTEM_RESOURCE_PROTECTION", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * XENV - Xen Environment table (ACPI 6.0) |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoXenv[] = |
| { |
| {ACPI_DMT_UINT64, ACPI_XENV_OFFSET (GrantTableAddress), "Grant Table Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_XENV_OFFSET (GrantTableSize), "Grant Table Size", 0}, |
| {ACPI_DMT_UINT32, ACPI_XENV_OFFSET (EventInterrupt), "Event Interrupt", 0}, |
| {ACPI_DMT_UINT8, ACPI_XENV_OFFSET (EventFlags), "Event Flags", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /*! [Begin] no source code translation */ |
| |
| /* |
| * Generic types (used in UEFI and custom tables) |
| * |
| * Examples: |
| * |
| * Buffer : cc 04 ff bb |
| * UINT8 : 11 |
| * UINT16 : 1122 |
| * UINT24 : 112233 |
| * UINT32 : 11223344 |
| * UINT56 : 11223344556677 |
| * UINT64 : 1122334455667788 |
| * |
| * String : "This is string" |
| * Unicode : "This string encoded to Unicode" |
| * |
| * GUID : 11223344-5566-7788-99aa-bbccddeeff00 |
| * DevicePath : "\PciRoot(0)\Pci(0x1f,1)\Usb(0,0)" |
| */ |
| |
| #define ACPI_DM_GENERIC_ENTRY(FieldType, FieldName) \ |
| {{FieldType, 0, FieldName, 0}, ACPI_DMT_TERMINATOR} |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGeneric[][2] = |
| { |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT8, "UINT8"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT16, "UINT16"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT24, "UINT24"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT32, "UINT32"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT40, "UINT40"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT48, "UINT48"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT56, "UINT56"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UINT64, "UINT64"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_STRING, "String"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UNICODE, "Unicode"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_BUFFER, "Buffer"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_UUID, "GUID"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_STRING, "DevicePath"), |
| ACPI_DM_GENERIC_ENTRY (ACPI_DMT_LABEL, "Label"), |
| {ACPI_DMT_TERMINATOR} |
| }; |
| /*! [End] no source code translation !*/ |
