| /****************************************************************************** |
| * |
| * Module Name: dmtbinfo1 - Table info for non-AML tables |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2020, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include "acpi.h" |
| #include "accommon.h" |
| #include "acdisasm.h" |
| #include "actbinfo.h" |
| |
| /* This module used for application-level code only */ |
| |
| #define _COMPONENT ACPI_CA_DISASSEMBLER |
| ACPI_MODULE_NAME ("dmtbinfo1") |
| |
| /* |
| * How to add a new table: |
| * |
| * - Add the C table definition to the actbl1.h or actbl2.h header. |
| * - Add ACPI_xxxx_OFFSET macro(s) for the table (and subtables) to list below. |
| * - Define the table in this file (for the disassembler). If any |
| * new data types are required (ACPI_DMT_*), see below. |
| * - Add an external declaration for the new table definition (AcpiDmTableInfo*) |
| * in acdisam.h |
| * - Add new table definition to the dispatch table in dmtable.c (AcpiDmTableData) |
| * If a simple table (with no subtables), no disassembly code is needed. |
| * Otherwise, create the AcpiDmDump* function for to disassemble the table |
| * and add it to the dmtbdump.c file. |
| * - Add an external declaration for the new AcpiDmDump* function in acdisasm.h |
| * - Add the new AcpiDmDump* function to the dispatch table in dmtable.c |
| * - Create a template for the new table |
| * - Add data table compiler support |
| * |
| * How to add a new data type (ACPI_DMT_*): |
| * |
| * - Add new type at the end of the ACPI_DMT list in acdisasm.h |
| * - Add length and implementation cases in dmtable.c (disassembler) |
| * - Add type and length cases in dtutils.c (DT compiler) |
| */ |
| |
| /* |
| * ACPI Table Information, used to dump formatted ACPI tables |
| * |
| * Each entry is of the form: <Field Type, Field Offset, Field Name> |
| */ |
| |
| |
| /******************************************************************************* |
| * |
| * ASF - Alert Standard Format table (Signature "ASF!") |
| * |
| ******************************************************************************/ |
| |
| /* Common Subtable header (one per Subtable) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsfHdr[] = |
| { |
| {ACPI_DMT_ASF, ACPI_ASF0_OFFSET (Header.Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF0_OFFSET (Header.Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF0_OFFSET (Header.Length), "Length", DT_LENGTH}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 0: ASF Information */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF0_OFFSET (MinResetValue), "Minimum Reset Value", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF0_OFFSET (MinPollInterval), "Minimum Polling Interval", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF0_OFFSET (SystemId), "System ID", 0}, |
| {ACPI_DMT_UINT32, ACPI_ASF0_OFFSET (MfgId), "Manufacturer ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF0_OFFSET (Flags), "Flags", 0}, |
| {ACPI_DMT_UINT24, ACPI_ASF0_OFFSET (Reserved2[0]), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1: ASF Alerts */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf1[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF1_OFFSET (AssertMask), "AssertMask", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1_OFFSET (DeassertMask), "DeassertMask", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1_OFFSET (Alerts), "Alert Count", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1_OFFSET (DataLength), "Alert Data Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1a: ASF Alert data */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf1a[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Address), "Address", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Command), "Command", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Mask), "Mask", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Value), "Value", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (SensorType), "SensorType", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Type), "Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Offset), "Offset", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (SourceType), "SourceType", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Severity), "Severity", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (SensorNumber), "SensorNumber", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Entity), "Entity", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF1a_OFFSET (Instance), "Instance", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 2: ASF Remote Control */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf2[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF2_OFFSET (Controls), "Control Count", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF2_OFFSET (DataLength), "Control Data Length", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF2_OFFSET (Reserved2), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 2a: ASF Control data */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf2a[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF2a_OFFSET (Function), "Function", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF2a_OFFSET (Address), "Address", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF2a_OFFSET (Command), "Command", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF2a_OFFSET (Value), "Value", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 3: ASF RMCP Boot Options */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf3[] = |
| { |
| {ACPI_DMT_BUF7, ACPI_ASF3_OFFSET (Capabilities[0]), "Capabilities", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF3_OFFSET (CompletionCode), "Completion Code", 0}, |
| {ACPI_DMT_UINT32, ACPI_ASF3_OFFSET (EnterpriseId), "Enterprise ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF3_OFFSET (Command), "Command", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF3_OFFSET (Parameter), "Parameter", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF3_OFFSET (BootOptions), "Boot Options", 0}, |
| {ACPI_DMT_UINT16, ACPI_ASF3_OFFSET (OemParameters), "Oem Parameters", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 4: ASF Address */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoAsf4[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_ASF4_OFFSET (EpromAddress), "Eprom Address", 0}, |
| {ACPI_DMT_UINT8, ACPI_ASF4_OFFSET (Devices), "Device Count", DT_COUNT}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * BERT - Boot Error Record table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoBert[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_BERT_OFFSET (RegionLength), "Boot Error Region Length", 0}, |
| {ACPI_DMT_UINT64, ACPI_BERT_OFFSET (Address), "Boot Error Region Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * BGRT - Boot Graphics Resource Table (ACPI 5.0) |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoBgrt[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_BGRT_OFFSET (Version), "Version", 0}, |
| {ACPI_DMT_UINT8, ACPI_BGRT_OFFSET (Status), "Status (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_BGRT_FLAG_OFFSET (Status, 0), "Displayed", 0}, |
| {ACPI_DMT_FLAGS1, ACPI_BGRT_FLAG_OFFSET (Status, 0), "Orientation Offset", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_BGRT_OFFSET (ImageType), "Image Type", 0}, |
| {ACPI_DMT_UINT64, ACPI_BGRT_OFFSET (ImageAddress), "Image Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_BGRT_OFFSET (ImageOffsetX), "Image OffsetX", 0}, |
| {ACPI_DMT_UINT32, ACPI_BGRT_OFFSET (ImageOffsetY), "Image OffsetY", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * BOOT - Simple Boot Flag Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoBoot[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_BOOT_OFFSET (CmosIndex), "Boot Register Index", 0}, |
| {ACPI_DMT_UINT24, ACPI_BOOT_OFFSET (Reserved[0]), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * CPEP - Corrected Platform Error Polling table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCpep[] = |
| { |
| {ACPI_DMT_UINT64, ACPI_CPEP_OFFSET (Reserved), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCpep0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_CPEP0_OFFSET (Header.Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_CPEP0_OFFSET (Header.Length), "Length", DT_LENGTH}, |
| {ACPI_DMT_UINT8, ACPI_CPEP0_OFFSET (Id), "Processor ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_CPEP0_OFFSET (Eid), "Processor EID", 0}, |
| {ACPI_DMT_UINT32, ACPI_CPEP0_OFFSET (Interval), "Polling Interval", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * CSRT - Core System Resource Table |
| * |
| ******************************************************************************/ |
| |
| /* Main table consists only of the standard ACPI table header */ |
| |
| /* Resource Group subtable */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCsrt0[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_CSRT0_OFFSET (Length), "Length", DT_LENGTH}, |
| {ACPI_DMT_UINT32, ACPI_CSRT0_OFFSET (VendorId), "Vendor ID", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT0_OFFSET (SubvendorId), "Subvendor ID", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT0_OFFSET (DeviceId), "Device ID", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT0_OFFSET (SubdeviceId), "Subdevice ID", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT0_OFFSET (Revision), "Revision", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT0_OFFSET (SharedInfoLength), "Shared Info Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Shared Info subtable */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCsrt1[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_CSRT1_OFFSET (MajorVersion), "Major Version", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT1_OFFSET (MinorVersion), "Minor Version", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT1_OFFSET (MmioBaseLow), "MMIO Base Address Low", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT1_OFFSET (MmioBaseHigh), "MMIO Base Address High", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT1_OFFSET (GsiInterrupt), "GSI Interrupt", 0}, |
| {ACPI_DMT_UINT8, ACPI_CSRT1_OFFSET (InterruptPolarity), "Interrupt Polarity", 0}, |
| {ACPI_DMT_UINT8, ACPI_CSRT1_OFFSET (InterruptMode), "Interrupt Mode", 0}, |
| {ACPI_DMT_UINT8, ACPI_CSRT1_OFFSET (NumChannels), "Num Channels", 0}, |
| {ACPI_DMT_UINT8, ACPI_CSRT1_OFFSET (DmaAddressWidth), "DMA Address Width", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT1_OFFSET (BaseRequestLine), "Base Request Line", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT1_OFFSET (NumHandshakeSignals), "Num Handshake Signals", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT1_OFFSET (MaxBlockSize), "Max Block Size", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Resource Descriptor subtable */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCsrt2[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_CSRT2_OFFSET (Length), "Length", DT_LENGTH}, |
| {ACPI_DMT_UINT16, ACPI_CSRT2_OFFSET (Type), "Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_CSRT2_OFFSET (Subtype), "Subtype", 0}, |
| {ACPI_DMT_UINT32, ACPI_CSRT2_OFFSET (Uid), "UID", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoCsrt2a[] = |
| { |
| {ACPI_DMT_RAW_BUFFER, 0, "ResourceInfo", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * DBG2 - Debug Port Table 2 |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_DBG2_OFFSET (InfoOffset), "Info Offset", 0}, |
| {ACPI_DMT_UINT32, ACPI_DBG2_OFFSET (InfoCount), "Info Count", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Debug Device Information Subtable */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2Device[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_DBG20_OFFSET (Revision), "Revision", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (Length), "Length", DT_LENGTH}, |
| {ACPI_DMT_UINT8, ACPI_DBG20_OFFSET (RegisterCount), "Register Count", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (NamepathLength), "Namepath Length", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (NamepathOffset), "Namepath Offset", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (OemDataLength), "OEM Data Length", DT_DESCRIBES_OPTIONAL}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (OemDataOffset), "OEM Data Offset", DT_DESCRIBES_OPTIONAL}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (PortType), "Port Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (PortSubtype), "Port Subtype", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (BaseAddressOffset), "Base Address Offset", 0}, |
| {ACPI_DMT_UINT16, ACPI_DBG20_OFFSET (AddressSizeOffset), "Address Size Offset", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Variable-length data for the subtable */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2Addr[] = |
| { |
| {ACPI_DMT_GAS, 0, "Base Address Register", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2Size[] = |
| { |
| {ACPI_DMT_UINT32, 0, "Address Size", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2Name[] = |
| { |
| {ACPI_DMT_STRING, 0, "Namepath", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbg2OemData[] = |
| { |
| {ACPI_DMT_RAW_BUFFER, 0, "OEM Data", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * DBGP - Debug Port |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDbgp[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_DBGP_OFFSET (Type), "Interface Type", 0}, |
| {ACPI_DMT_UINT24, ACPI_DBGP_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_DBGP_OFFSET (DebugPort), "Debug Port Register", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * DMAR - DMA Remapping table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_DMAR_OFFSET (Width), "Host Address Width", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMAR_OFFSET (Flags), "Flags", 0}, |
| {ACPI_DMT_BUF10, ACPI_DMAR_OFFSET (Reserved[0]), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Common Subtable header (one per Subtable) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmarHdr[] = |
| { |
| {ACPI_DMT_DMAR, ACPI_DMAR0_OFFSET (Header.Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_DMAR0_OFFSET (Header.Length), "Length", DT_LENGTH}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Common device scope entry */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmarScope[] = |
| { |
| {ACPI_DMT_DMAR_SCOPE, ACPI_DMARS_OFFSET (EntryType), "Device Scope Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMARS_OFFSET (Length), "Entry Length", DT_LENGTH}, |
| {ACPI_DMT_UINT16, ACPI_DMARS_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMARS_OFFSET (EnumerationId), "Enumeration ID", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMARS_OFFSET (Bus), "PCI Bus Number", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* DMAR Subtables */ |
| |
| /* 0: Hardware Unit Definition */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_DMAR0_OFFSET (Flags), "Flags", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMAR0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_DMAR0_OFFSET (Segment), "PCI Segment Number", 0}, |
| {ACPI_DMT_UINT64, ACPI_DMAR0_OFFSET (Address), "Register Base Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1: Reserved Memory Definition */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar1[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_DMAR1_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_DMAR1_OFFSET (Segment), "PCI Segment Number", 0}, |
| {ACPI_DMT_UINT64, ACPI_DMAR1_OFFSET (BaseAddress), "Base Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_DMAR1_OFFSET (EndAddress), "End Address (limit)", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 2: Root Port ATS Capability Definition */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar2[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_DMAR2_OFFSET (Flags), "Flags", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMAR2_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT16, ACPI_DMAR2_OFFSET (Segment), "PCI Segment Number", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 3: Remapping Hardware Static Affinity Structure */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar3[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_DMAR3_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_DMAR3_OFFSET (BaseAddress), "Base Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_DMAR3_OFFSET (ProximityDomain), "Proximity Domain", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 4: ACPI Namespace Device Declaration Structure */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDmar4[] = |
| { |
| {ACPI_DMT_UINT24, ACPI_DMAR4_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT8, ACPI_DMAR4_OFFSET (DeviceNumber), "Device Number", 0}, |
| {ACPI_DMT_STRING, ACPI_DMAR4_OFFSET (DeviceName[0]), "Device Name", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * DRTM - Dynamic Root of Trust for Measurement table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm[] = |
| { |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (EntryBaseAddress), "Entry Base Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (EntryLength), "Entry Length", 0}, |
| {ACPI_DMT_UINT32, ACPI_DRTM_OFFSET (EntryAddress32), "Entry 32", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (EntryAddress64), "Entry 64", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (ExitAddress), "Exit Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (LogAreaAddress), "Log Area Start", 0}, |
| {ACPI_DMT_UINT32, ACPI_DRTM_OFFSET (LogAreaLength), "Log Area Length", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM_OFFSET (ArchDependentAddress), "Arch Dependent Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_DRTM_OFFSET (Flags), "Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAG0, ACPI_DRTM_FLAG_OFFSET (Flags, 0), "Namespace in TCB", 0}, |
| {ACPI_DMT_FLAG1, ACPI_DRTM_FLAG_OFFSET (Flags, 0), "Gap Code on S3 Resume", 0}, |
| {ACPI_DMT_FLAG2, ACPI_DRTM_FLAG_OFFSET (Flags, 0), "Gap Code on DLME_Exit", 0}, |
| {ACPI_DMT_FLAG3, ACPI_DRTM_FLAG_OFFSET (Flags, 0), "PCR_Authorities Changed", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm0[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_DRTM0_OFFSET (ValidatedTableCount), "Validated Table Count", DT_COUNT}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm0a[] = |
| { |
| {ACPI_DMT_UINT64, 0, "Table Address", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm1[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_DRTM1_OFFSET (ResourceCount), "Resource Count", DT_COUNT}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm1a[] = |
| { |
| {ACPI_DMT_UINT56, ACPI_DRTM1a_OFFSET (Size[0]), "Size", DT_OPTIONAL}, |
| {ACPI_DMT_UINT8, ACPI_DRTM1a_OFFSET (Type), "Type", 0}, |
| {ACPI_DMT_FLAG0, ACPI_DRTM1a_FLAG_OFFSET (Type, 0), "Resource Type", 0}, |
| {ACPI_DMT_FLAG7, ACPI_DRTM1a_FLAG_OFFSET (Type, 0), "Protections", 0}, |
| {ACPI_DMT_UINT64, ACPI_DRTM1a_OFFSET (Address), "Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoDrtm2[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_DRTM2_OFFSET (DpsIdLength), "DLME Platform Id Length", DT_COUNT}, |
| {ACPI_DMT_BUF16, ACPI_DRTM2_OFFSET (DpsId), "DLME Platform Id", DT_COUNT}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * ECDT - Embedded Controller Boot Resources Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoEcdt[] = |
| { |
| {ACPI_DMT_GAS, ACPI_ECDT_OFFSET (Control), "Command/Status Register", 0}, |
| {ACPI_DMT_GAS, ACPI_ECDT_OFFSET (Data), "Data Register", 0}, |
| {ACPI_DMT_UINT32, ACPI_ECDT_OFFSET (Uid), "UID", 0}, |
| {ACPI_DMT_UINT8, ACPI_ECDT_OFFSET (Gpe), "GPE Number", 0}, |
| {ACPI_DMT_STRING, ACPI_ECDT_OFFSET (Id[0]), "Namepath", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * EINJ - Error Injection table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoEinj[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_EINJ_OFFSET (HeaderLength), "Injection Header Length", 0}, |
| {ACPI_DMT_UINT8, ACPI_EINJ_OFFSET (Flags), "Flags", 0}, |
| {ACPI_DMT_UINT24, ACPI_EINJ_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_EINJ_OFFSET (Entries), "Injection Entry Count", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoEinj0[] = |
| { |
| {ACPI_DMT_EINJACT, ACPI_EINJ0_OFFSET (Action), "Action", 0}, |
| {ACPI_DMT_EINJINST, ACPI_EINJ0_OFFSET (Instruction), "Instruction", 0}, |
| {ACPI_DMT_UINT8, ACPI_EINJ0_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_EINJ0_FLAG_OFFSET (Flags,0), "Preserve Register Bits", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_EINJ0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_EINJ0_OFFSET (RegisterRegion), "Register Region", 0}, |
| {ACPI_DMT_UINT64, ACPI_EINJ0_OFFSET (Value), "Value", 0}, |
| {ACPI_DMT_UINT64, ACPI_EINJ0_OFFSET (Mask), "Mask", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * ERST - Error Record Serialization table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoErst[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_ERST_OFFSET (HeaderLength), "Serialization Header Length", 0}, |
| {ACPI_DMT_UINT32, ACPI_ERST_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_ERST_OFFSET (Entries), "Instruction Entry Count", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoErst0[] = |
| { |
| {ACPI_DMT_ERSTACT, ACPI_ERST0_OFFSET (Action), "Action", 0}, |
| {ACPI_DMT_ERSTINST, ACPI_ERST0_OFFSET (Instruction), "Instruction", 0}, |
| {ACPI_DMT_UINT8, ACPI_ERST0_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_ERST0_FLAG_OFFSET (Flags,0), "Preserve Register Bits", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_ERST0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_GAS, ACPI_ERST0_OFFSET (RegisterRegion), "Register Region", 0}, |
| {ACPI_DMT_UINT64, ACPI_ERST0_OFFSET (Value), "Value", 0}, |
| {ACPI_DMT_UINT64, ACPI_ERST0_OFFSET (Mask), "Mask", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * FPDT - Firmware Performance Data Table (ACPI 5.0) |
| * |
| ******************************************************************************/ |
| |
| /* Main table consists of only the standard ACPI header - subtables follow */ |
| |
| /* FPDT subtable header */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoFpdtHdr[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_FPDTH_OFFSET (Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_FPDTH_OFFSET (Length), "Length", DT_LENGTH}, |
| {ACPI_DMT_UINT8, ACPI_FPDTH_OFFSET (Revision), "Revision", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 0: Firmware Basic Boot Performance Record */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoFpdt0[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_FPDT0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT1_OFFSET (Address), "FPDT Boot Record Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1: S3 Performance Table Pointer Record */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoFpdt1[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_FPDT1_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT1_OFFSET (Address), "S3PT Record Address", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| #if 0 |
| /* Boot Performance Record, not supported at this time. */ |
| {ACPI_DMT_UINT64, ACPI_FPDT0_OFFSET (ResetEnd), "Reset End", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT0_OFFSET (LoadStart), "Load Image Start", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT0_OFFSET (StartupStart), "Start Image Start", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT0_OFFSET (ExitServicesEntry), "Exit Services Entry", 0}, |
| {ACPI_DMT_UINT64, ACPI_FPDT0_OFFSET (ExitServicesExit), "Exit Services Exit", 0}, |
| #endif |
| |
| |
| /******************************************************************************* |
| * |
| * GTDT - Generic Timer Description Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdt[] = |
| { |
| {ACPI_DMT_UINT64, ACPI_GTDT_OFFSET (CounterBlockAddresss), "Counter Block Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (Reserved), "Reserved", 0}, |
| ACPI_DMT_NEW_LINE, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (SecureEl1Interrupt), "Secure EL1 Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (SecureEl1Flags), "EL1 Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT_FLAG_OFFSET (SecureEl1Flags,0), "Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT_FLAG_OFFSET (SecureEl1Flags,0), "Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_GTDT_FLAG_OFFSET (SecureEl1Flags,0), "Always On", 0}, |
| ACPI_DMT_NEW_LINE, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (NonSecureEl1Interrupt), "Non-Secure EL1 Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (NonSecureEl1Flags), "NEL1 Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT_FLAG_OFFSET (NonSecureEl1Flags,0),"Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT_FLAG_OFFSET (NonSecureEl1Flags,0),"Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_GTDT_FLAG_OFFSET (NonSecureEl1Flags,0),"Always On", 0}, |
| ACPI_DMT_NEW_LINE, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (VirtualTimerInterrupt), "Virtual Timer Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (VirtualTimerFlags), "VT Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT_FLAG_OFFSET (VirtualTimerFlags,0),"Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT_FLAG_OFFSET (VirtualTimerFlags,0),"Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_GTDT_FLAG_OFFSET (VirtualTimerFlags,0),"Always On", 0}, |
| ACPI_DMT_NEW_LINE, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (NonSecureEl2Interrupt), "Non-Secure EL2 Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (NonSecureEl2Flags), "NEL2 Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT_FLAG_OFFSET (NonSecureEl2Flags,0),"Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT_FLAG_OFFSET (NonSecureEl2Flags,0),"Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_GTDT_FLAG_OFFSET (NonSecureEl2Flags,0),"Always On", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT_OFFSET (CounterReadBlockAddress), "Counter Read Block Address", 0}, |
| ACPI_DMT_NEW_LINE, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (PlatformTimerCount), "Platform Timer Count", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_OFFSET (PlatformTimerOffset), "Platform Timer Offset", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* GDTD EL2 timer info. This table is appended to AcpiDmTableInfoGtdt for rev 3 and later */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdtEl2[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_GTDT_EL2_OFFSET (VirtualEL2TimerGsiv), "Virtual EL2 Timer GSIV", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT_EL2_OFFSET (VirtualEL2TimerFlags), "Virtual EL2 Timer Flags", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* GTDT Subtable header (one per Subtable) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdtHdr[] = |
| { |
| {ACPI_DMT_GTDT, ACPI_GTDTH_OFFSET (Type), "Subtable Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_GTDTH_OFFSET (Length), "Length", DT_LENGTH}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* GTDT Subtables */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdt0[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_GTDT0_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT0_OFFSET (BlockAddress), "Block Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0_OFFSET (TimerCount), "Timer Count", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0_OFFSET (TimerOffset), "Timer Offset", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdt0a[] = |
| { |
| {ACPI_DMT_UINT8 , ACPI_GTDT0a_OFFSET (FrameNumber), "Frame Number", 0}, |
| {ACPI_DMT_UINT24, ACPI_GTDT0a_OFFSET (Reserved[0]), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT0a_OFFSET (BaseAddress), "Base Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT0a_OFFSET (El0BaseAddress), "EL0 Base Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0a_OFFSET (TimerInterrupt), "Timer Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0a_OFFSET (TimerFlags), "Timer Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT0a_FLAG_OFFSET (TimerFlags,0), "Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT0a_FLAG_OFFSET (TimerFlags,0), "Polarity", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0a_OFFSET (VirtualTimerInterrupt), "Virtual Timer Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0a_OFFSET (VirtualTimerFlags), "Virtual Timer Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT0a_FLAG_OFFSET (VirtualTimerFlags,0), "Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT0a_FLAG_OFFSET (VirtualTimerFlags,0), "Polarity", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT0a_OFFSET (CommonFlags), "Common Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT0a_FLAG_OFFSET (CommonFlags,0), "Secure", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT0a_FLAG_OFFSET (CommonFlags,0), "Always On", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoGtdt1[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_GTDT1_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT1_OFFSET (RefreshFrameAddress), "Refresh Frame Address", 0}, |
| {ACPI_DMT_UINT64, ACPI_GTDT1_OFFSET (ControlFrameAddress), "Control Frame Address", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT1_OFFSET (TimerInterrupt), "Timer Interrupt", 0}, |
| {ACPI_DMT_UINT32, ACPI_GTDT1_OFFSET (TimerFlags), "Timer Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_GTDT1_FLAG_OFFSET (TimerFlags,0), "Trigger Mode", 0}, |
| {ACPI_DMT_FLAG1, ACPI_GTDT1_FLAG_OFFSET (TimerFlags,0), "Polarity", 0}, |
| {ACPI_DMT_FLAG2, ACPI_GTDT1_FLAG_OFFSET (TimerFlags,0), "Security", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * HEST - Hardware Error Source table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_HEST_OFFSET (ErrorSourceCount), "Error Source Count", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Common HEST structures for subtables */ |
| |
| #define ACPI_DM_HEST_HEADER \ |
| {ACPI_DMT_HEST, ACPI_HEST0_OFFSET (Header.Type), "Subtable Type", 0}, \ |
| {ACPI_DMT_UINT16, ACPI_HEST0_OFFSET (Header.SourceId), "Source Id", 0} |
| |
| #define ACPI_DM_HEST_AER \ |
| {ACPI_DMT_UINT16, ACPI_HEST6_OFFSET (Aer.Reserved1), "Reserved", 0}, \ |
| {ACPI_DMT_UINT8, ACPI_HEST6_OFFSET (Aer.Flags), "Flags (decoded below)", DT_FLAG}, \ |
| {ACPI_DMT_FLAG0, ACPI_HEST6_FLAG_OFFSET (Aer.Flags,0), "Firmware First", 0}, \ |
| {ACPI_DMT_FLAG0, ACPI_HEST6_FLAG_OFFSET (Aer.Flags,0), "Global", 0}, \ |
| {ACPI_DMT_UINT8, ACPI_HEST6_OFFSET (Aer.Enabled), "Enabled", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.RecordsToPreallocate), "Records To Preallocate", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.MaxSectionsPerRecord), "Max Sections Per Record", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.Bus), "Bus", 0}, \ |
| {ACPI_DMT_UINT16, ACPI_HEST6_OFFSET (Aer.Device), "Device", 0}, \ |
| {ACPI_DMT_UINT16, ACPI_HEST6_OFFSET (Aer.Function), "Function", 0}, \ |
| {ACPI_DMT_UINT16, ACPI_HEST6_OFFSET (Aer.DeviceControl), "DeviceControl", 0}, \ |
| {ACPI_DMT_UINT16, ACPI_HEST6_OFFSET (Aer.Reserved2), "Reserved", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.UncorrectableMask), "Uncorrectable Mask", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.UncorrectableSeverity), "Uncorrectable Severity", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.CorrectableMask), "Correctable Mask", 0}, \ |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (Aer.AdvancedCapabilities), "Advanced Capabilities", 0} |
| |
| |
| /* HEST Subtables */ |
| |
| /* 0: IA32 Machine Check Exception */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest0[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT16, ACPI_HEST0_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST0_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_HEST0_FLAG_OFFSET (Flags,0), "Firmware First", 0}, |
| {ACPI_DMT_FLAG2, ACPI_HEST0_FLAG_OFFSET (Flags,0), "GHES Assist", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_HEST0_OFFSET (Enabled), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST0_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST0_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_UINT64, ACPI_HEST0_OFFSET (GlobalCapabilityData), "Global Capability Data", 0}, |
| {ACPI_DMT_UINT64, ACPI_HEST0_OFFSET (GlobalControlData), "Global Control Data", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST0_OFFSET (NumHardwareBanks), "Num Hardware Banks", 0}, |
| {ACPI_DMT_UINT56, ACPI_HEST0_OFFSET (Reserved3[0]), "Reserved2", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 1: IA32 Corrected Machine Check */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest1[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT16, ACPI_HEST1_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST1_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_HEST1_FLAG_OFFSET (Flags,0), "Firmware First", 0}, |
| {ACPI_DMT_FLAG2, ACPI_HEST1_FLAG_OFFSET (Flags,0), "GHES Assist", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_HEST1_OFFSET (Enabled), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST1_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST1_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_HESTNTFY, ACPI_HEST1_OFFSET (Notify), "Notify", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST1_OFFSET (NumHardwareBanks), "Num Hardware Banks", 0}, |
| {ACPI_DMT_UINT24, ACPI_HEST1_OFFSET (Reserved2[0]), "Reserved2", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 2: IA32 Non-Maskable Interrupt */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest2[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT32, ACPI_HEST2_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST2_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST2_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST2_OFFSET (MaxRawDataLength), "Max Raw Data Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 6: PCI Express Root Port AER */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest6[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| ACPI_DM_HEST_AER, |
| {ACPI_DMT_UINT32, ACPI_HEST6_OFFSET (RootErrorCommand), "Root Error Command", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 7: PCI Express AER (AER Endpoint) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest7[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| ACPI_DM_HEST_AER, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 8: PCI Express/PCI-X Bridge AER */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest8[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| ACPI_DM_HEST_AER, |
| {ACPI_DMT_UINT32, ACPI_HEST8_OFFSET (UncorrectableMask2), "2nd Uncorrectable Mask", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST8_OFFSET (UncorrectableSeverity2), "2nd Uncorrectable Severity", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST8_OFFSET (AdvancedCapabilities2), "2nd Advanced Capabilities", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 9: Generic Hardware Error Source */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest9[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT16, ACPI_HEST9_OFFSET (RelatedSourceId), "Related Source Id", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST9_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST9_OFFSET (Enabled), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST9_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST9_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST9_OFFSET (MaxRawDataLength), "Max Raw Data Length", 0}, |
| {ACPI_DMT_GAS, ACPI_HEST9_OFFSET (ErrorStatusAddress), "Error Status Address", 0}, |
| {ACPI_DMT_HESTNTFY, ACPI_HEST9_OFFSET (Notify), "Notify", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST9_OFFSET (ErrorBlockLength), "Error Status Block Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 10: Generic Hardware Error Source - Version 2 */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest10[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT16, ACPI_HEST10_OFFSET (RelatedSourceId), "Related Source Id", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST10_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST10_OFFSET (Enabled), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST10_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST10_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST10_OFFSET (MaxRawDataLength), "Max Raw Data Length", 0}, |
| {ACPI_DMT_GAS, ACPI_HEST10_OFFSET (ErrorStatusAddress), "Error Status Address", 0}, |
| {ACPI_DMT_HESTNTFY, ACPI_HEST10_OFFSET (Notify), "Notify", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST10_OFFSET (ErrorBlockLength), "Error Status Block Length", 0}, |
| {ACPI_DMT_GAS, ACPI_HEST10_OFFSET (ReadAckRegister), "Read Ack Register", 0}, |
| {ACPI_DMT_UINT64, ACPI_HEST10_OFFSET (ReadAckPreserve), "Read Ack Preserve", 0}, |
| {ACPI_DMT_UINT64, ACPI_HEST10_OFFSET (ReadAckWrite), "Read Ack Write", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 11: IA32 Deferred Machine Check */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHest11[] = |
| { |
| ACPI_DM_HEST_HEADER, |
| {ACPI_DMT_UINT16, ACPI_HEST11_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST11_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_HEST11_FLAG_OFFSET (Flags,0), "Firmware First", 0}, |
| {ACPI_DMT_FLAG2, ACPI_HEST11_FLAG_OFFSET (Flags,0), "GHES Assist", 0}, |
| |
| {ACPI_DMT_UINT8, ACPI_HEST11_OFFSET (Enabled), "Enabled", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST11_OFFSET (RecordsToPreallocate), "Records To Preallocate", 0}, |
| {ACPI_DMT_UINT32, ACPI_HEST11_OFFSET (MaxSectionsPerRecord), "Max Sections Per Record", 0}, |
| {ACPI_DMT_HESTNTFY, ACPI_HEST11_OFFSET (Notify), "Notify", 0}, |
| {ACPI_DMT_UINT8, ACPI_HEST11_OFFSET (NumHardwareBanks), "Num Hardware Banks", 0}, |
| {ACPI_DMT_UINT24, ACPI_HEST11_OFFSET (Reserved2[0]), "Reserved2", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Notification Structure */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHestNotify[] = |
| { |
| {ACPI_DMT_HESTNTYP, ACPI_HESTN_OFFSET (Type), "Notify Type", 0}, |
| {ACPI_DMT_UINT8, ACPI_HESTN_OFFSET (Length), "Notify Length", DT_LENGTH}, |
| {ACPI_DMT_UINT16, ACPI_HESTN_OFFSET (ConfigWriteEnable), "Configuration Write Enable", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (PollInterval), "PollInterval", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (Vector), "Vector", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (PollingThresholdValue), "Polling Threshold Value", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (PollingThresholdWindow), "Polling Threshold Window", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (ErrorThresholdValue), "Error Threshold Value", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTN_OFFSET (ErrorThresholdWindow), "Error Threshold Window", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /* |
| * IA32 Error Bank(s) - Follows the ACPI_HEST_IA_MACHINE_CHECK and |
| * ACPI_HEST_IA_CORRECTED structures. |
| */ |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHestBank[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_HESTB_OFFSET (BankNumber), "Bank Number", 0}, |
| {ACPI_DMT_UINT8, ACPI_HESTB_OFFSET (ClearStatusOnInit), "Clear Status On Init", 0}, |
| {ACPI_DMT_UINT8, ACPI_HESTB_OFFSET (StatusFormat), "Status Format", 0}, |
| {ACPI_DMT_UINT8, ACPI_HESTB_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTB_OFFSET (ControlRegister), "Control Register", 0}, |
| {ACPI_DMT_UINT64, ACPI_HESTB_OFFSET (ControlData), "Control Data", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTB_OFFSET (StatusRegister), "Status Register", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTB_OFFSET (AddressRegister), "Address Register", 0}, |
| {ACPI_DMT_UINT32, ACPI_HESTB_OFFSET (MiscRegister), "Misc Register", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * HMAT - Heterogeneous Memory Attributes Table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_HMAT_OFFSET (Reserved), "Reserved", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* Common HMAT structure header (one per Subtable) */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmatHdr[] = |
| { |
| {ACPI_DMT_HMAT, ACPI_HMATH_OFFSET (Type), "Structure Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_HMATH_OFFSET (Reserved), "Reserved", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMATH_OFFSET (Length), "Length", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* HMAT subtables */ |
| |
| /* 0x00: Memory proximity domain attributes */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat0[] = |
| { |
| {ACPI_DMT_UINT16, ACPI_HMAT0_OFFSET (Flags), "Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAG0, ACPI_HMAT0_FLAG_OFFSET (Flags,0), "Processor Proximity Domain Valid", 0}, |
| {ACPI_DMT_UINT16, ACPI_HMAT0_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT0_OFFSET (ProcessorPD), "Processor Proximity Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT0_OFFSET (MemoryPD), "Memory Proximity Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT0_OFFSET (Reserved2), "Reserved2", 0}, |
| {ACPI_DMT_UINT64, ACPI_HMAT0_OFFSET (Reserved3), "Reserved3", 0}, |
| {ACPI_DMT_UINT64, ACPI_HMAT0_OFFSET (Reserved4), "Reserved4", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 0x01: System Locality Latency and Bandwidth Information */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat1[] = |
| { |
| {ACPI_DMT_UINT8, ACPI_HMAT1_OFFSET (Flags), "Flags (decoded below)", 0}, |
| {ACPI_DMT_FLAGS4_0, ACPI_HMAT1_FLAG_OFFSET (Flags,0), "Memory Hierarchy", 0}, |
| {ACPI_DMT_UINT8, ACPI_HMAT1_OFFSET (DataType), "Data Type", 0}, |
| {ACPI_DMT_UINT16, ACPI_HMAT1_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT1_OFFSET (NumberOfInitiatorPDs), "Initiator Proximity Domains #", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT1_OFFSET (NumberOfTargetPDs), "Target Proximity Domains #", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT1_OFFSET (Reserved2), "Reserved2", 0}, |
| {ACPI_DMT_UINT64, ACPI_HMAT1_OFFSET (EntryBaseUnit), "Entry Base Unit", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat1a[] = |
| { |
| {ACPI_DMT_UINT32, 0, "Initiator Proximity Domain List", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat1b[] = |
| { |
| {ACPI_DMT_UINT32, 0, "Target Proximity Domain List", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat1c[] = |
| { |
| {ACPI_DMT_UINT16, 0, "Entry", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| /* 0x02: Memory Side Cache Information */ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat2[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_HMAT2_OFFSET (MemoryPD), "Memory Proximity Domain", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT2_OFFSET (Reserved1), "Reserved1", 0}, |
| {ACPI_DMT_UINT64, ACPI_HMAT2_OFFSET (CacheSize), "Memory Side Cache Size", 0}, |
| {ACPI_DMT_UINT32, ACPI_HMAT2_OFFSET (CacheAttributes), "Cache Attributes (decoded below)", 0}, |
| {ACPI_DMT_FLAGS4_0, ACPI_HMAT2_FLAG_OFFSET (CacheAttributes,0), "Total Cache Levels", 0}, |
| {ACPI_DMT_FLAGS4_4, ACPI_HMAT2_FLAG_OFFSET (CacheAttributes,0), "Cache Level", 0}, |
| {ACPI_DMT_FLAGS4_8, ACPI_HMAT2_FLAG_OFFSET (CacheAttributes,0), "Cache Associativity", 0}, |
| {ACPI_DMT_FLAGS4_12, ACPI_HMAT2_FLAG_OFFSET (CacheAttributes,0), "Write Policy", 0}, |
| {ACPI_DMT_FLAGS16_16, ACPI_HMAT2_FLAG_OFFSET (CacheAttributes,0), "Cache Line Size", 0}, |
| {ACPI_DMT_UINT16, ACPI_HMAT2_OFFSET (Reserved2), "Reserved2", 0}, |
| {ACPI_DMT_UINT16, ACPI_HMAT2_OFFSET (NumberOfSMBIOSHandles), "SMBIOS Handle #", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHmat2a[] = |
| { |
| {ACPI_DMT_UINT16, 0, "SMBIOS Handle", DT_OPTIONAL}, |
| ACPI_DMT_TERMINATOR |
| }; |
| |
| |
| /******************************************************************************* |
| * |
| * HPET - High Precision Event Timer table |
| * |
| ******************************************************************************/ |
| |
| ACPI_DMTABLE_INFO AcpiDmTableInfoHpet[] = |
| { |
| {ACPI_DMT_UINT32, ACPI_HPET_OFFSET (Id), "Hardware Block ID", 0}, |
| {ACPI_DMT_GAS, ACPI_HPET_OFFSET (Address), "Timer Block Register", 0}, |
| {ACPI_DMT_UINT8, ACPI_HPET_OFFSET (Sequence), "Sequence Number", 0}, |
| {ACPI_DMT_UINT16, ACPI_HPET_OFFSET (MinimumTick), "Minimum Clock Ticks", 0}, |
| {ACPI_DMT_UINT8, ACPI_HPET_OFFSET (Flags), "Flags (decoded below)", DT_FLAG}, |
| {ACPI_DMT_FLAG0, ACPI_HPET_FLAG_OFFSET (Flags,0), "4K Page Protect", 0}, |
| {ACPI_DMT_FLAG1, ACPI_HPET_FLAG_OFFSET (Flags,0), "64K Page Protect", 0}, |
| ACPI_DMT_TERMINATOR |
| }; |
| /*! [End] no source code translation !*/ |
