| /* |
| * Copyright (c) 2015-2022 The Khronos Group Inc. |
| * Copyright (c) 2015-2022 Valve Corporation |
| * Copyright (c) 2015-2022 LunarG, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * Author: Chia-I Wu <olvaffe@gmail.com> |
| * Author: Courtney Goeltzenleuchter <courtney@LunarG.com> |
| * Author: Tony Barbour <tony@LunarG.com> |
| */ |
| |
| #include "vktestframework.h" |
| #include "vkrenderframework.h" |
| |
| // For versions prior to VS 2015, suppress the warning |
| // caused by the inconsistent redefinition of snprintf |
| // between a vulkan header and a glslang header. |
| #if (defined(_MSC_VER) && _MSC_VER < 1900 /*vs2015*/) |
| #pragma warning(push) |
| #pragma warning(disable : 4005) |
| #endif |
| // TODO FIXME remove this once glslang doesn't define this |
| #undef BadValue |
| #include "glslang/SPIRV/GlslangToSpv.h" |
| #include "glslang/SPIRV/SPVRemapper.h" |
| #if (defined(_MSC_VER) && _MSC_VER < 1900 /*vs2015*/) |
| #pragma warning(pop) |
| #endif |
| #include <limits.h> |
| #include <cmath> |
| |
| #if defined(PATH_MAX) && !defined(MAX_PATH) |
| #define MAX_PATH PATH_MAX |
| #endif |
| |
| #ifdef _WIN32 |
| #define ERR_EXIT(err_msg, err_class) \ |
| do { \ |
| MessageBox(NULL, err_msg, err_class, MB_OK); \ |
| exit(1); \ |
| } while (0) |
| #else // _WIN32 |
| |
| #define ERR_EXIT(err_msg, err_class) \ |
| do { \ |
| printf(err_msg); \ |
| fflush(stdout); \ |
| exit(1); \ |
| } while (0) |
| #endif // _WIN32 |
| |
| // Command-line options |
| enum TOptions { |
| EOptionNone = 0x000, |
| EOptionIntermediate = 0x001, |
| EOptionSuppressInfolog = 0x002, |
| EOptionMemoryLeakMode = 0x004, |
| EOptionRelaxedErrors = 0x008, |
| EOptionGiveWarnings = 0x010, |
| EOptionLinkProgram = 0x020, |
| EOptionMultiThreaded = 0x040, |
| EOptionDumpConfig = 0x080, |
| EOptionDumpReflection = 0x100, |
| EOptionSuppressWarnings = 0x200, |
| EOptionDumpVersions = 0x400, |
| EOptionSpv = 0x800, |
| EOptionDefaultDesktop = 0x1000, |
| }; |
| |
| struct SwapchainBuffers { |
| VkImage image; |
| VkCommandBuffer cmd; |
| VkImageView view; |
| }; |
| |
| #ifndef _WIN32 |
| |
| #include <errno.h> |
| |
| int fopen_s(FILE **pFile, const char *filename, const char *mode) { |
| if (!pFile || !filename || !mode) { |
| return EINVAL; |
| } |
| |
| FILE *f = fopen(filename, mode); |
| if (!f) { |
| if (errno != 0) { |
| return errno; |
| } else { |
| return ENOENT; |
| } |
| } |
| *pFile = f; |
| |
| return 0; |
| } |
| |
| #endif |
| |
| // Set up environment for GLSL compiler |
| // Must be done once per process |
| void TestEnvironment::SetUp() { |
| // Initialize GLSL to SPV compiler utility |
| glslang::InitializeProcess(); |
| |
| vk_testing::set_error_callback(test_error_callback); |
| |
| vk::InitDispatchTable(); |
| } |
| |
| void TestEnvironment::TearDown() { glslang::FinalizeProcess(); } |
| |
| VkTestFramework::VkTestFramework() : m_compile_options(0), m_num_shader_strings(0) {} |
| |
| VkTestFramework::~VkTestFramework() {} |
| |
| // Define all the static elements |
| bool VkTestFramework::m_canonicalize_spv = false; |
| bool VkTestFramework::m_strip_spv = false; |
| bool VkTestFramework::m_do_everything_spv = false; |
| bool VkTestFramework::m_devsim_layer = false; |
| int VkTestFramework::m_width = 0; |
| int VkTestFramework::m_height = 0; |
| int VkTestFramework::m_phys_device_index = -1; |
| |
| bool VkTestFramework::optionMatch(const char *option, char *optionLine) { |
| if (strncmp(option, optionLine, strlen(option)) == 0) |
| return true; |
| else |
| return false; |
| } |
| |
| void VkTestFramework::InitArgs(int *argc, char *argv[]) { |
| int i, n; |
| |
| for (i = 1, n = 1; i < *argc; i++) { |
| if (optionMatch("--strip-SPV", argv[i])) |
| m_strip_spv = true; |
| else if (optionMatch("--canonicalize-SPV", argv[i])) |
| m_canonicalize_spv = true; |
| else if (optionMatch("--devsim", argv[i])) |
| m_devsim_layer = true; |
| else if (optionMatch("--device-index", argv[i]) && ((i + 1) < *argc)) { |
| m_phys_device_index = std::atoi(argv[++i]); |
| } else if (optionMatch("--help", argv[i]) || optionMatch("-h", argv[i])) { |
| printf("\nOther options:\n"); |
| printf( |
| "\t--show-images\n" |
| "\t\tDisplay test images in viewer after tests complete.\n"); |
| printf( |
| "\t--save-images\n" |
| "\t\tSave tests images as ppm files in current working directory.\n" |
| "\t\tUsed to generate golden images for compare-images.\n"); |
| printf( |
| "\t--compare-images\n" |
| "\t\tCompare test images to 'golden' image in golden folder.\n" |
| "\t\tAlso saves the generated test image in current working\n" |
| "\t\t\tdirectory but only if the image is different from the golden\n" |
| "\t\tSetting RENDERTEST_GOLDEN_DIR environment variable can specify\n" |
| "\t\t\tdifferent directory for golden images\n" |
| "\t\tSignal test failure if different.\n"); |
| printf( |
| "\t--no-SPV\n" |
| "\t\tUse built-in GLSL compiler rather than SPV code path.\n"); |
| printf( |
| "\t--strip-SPV\n" |
| "\t\tStrip SPIR-V debug information (line numbers, names, etc).\n"); |
| printf( |
| "\t--canonicalize-SPV\n" |
| "\t\tRemap SPIR-V ids before submission to aid compression.\n"); |
| printf( |
| "\t--device-index <physical device index>\n" |
| "\t\tIndex into VkPhysicalDevice array returned from vkEnumeratePhysicalDevices.\n" |
| "\t\tThe default behavior is to automatically choose \"the most reasonable device.\"\n" |
| "\t\tAn invalid index (i.e., outside the range [0, *pPhysicalDeviceCount)) will result in the default behavior\n"); |
| exit(0); |
| } else { |
| printf("\nUnrecognized option: %s\n", argv[i]); |
| printf("\nUse --help or -h for option list.\n"); |
| exit(0); |
| } |
| |
| /* |
| * Since the above "consume" inputs, update argv |
| * so that it contains the trimmed list of args for glutInit |
| */ |
| |
| argv[n] = argv[i]; |
| n++; |
| } |
| } |
| |
| VkFormat VkTestFramework::GetFormat(VkInstance instance, vk_testing::Device *device) { |
| VkFormatProperties format_props; |
| |
| vk::GetPhysicalDeviceFormatProperties(device->phy().handle(), VK_FORMAT_B8G8R8A8_UNORM, &format_props); |
| if (format_props.linearTilingFeatures & VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT || |
| format_props.optimalTilingFeatures & VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT) { |
| return VK_FORMAT_B8G8R8A8_UNORM; |
| } |
| vk::GetPhysicalDeviceFormatProperties(device->phy().handle(), VK_FORMAT_R8G8B8A8_UNORM, &format_props); |
| if (format_props.linearTilingFeatures & VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT || |
| format_props.optimalTilingFeatures & VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT) { |
| return VK_FORMAT_R8G8B8A8_UNORM; |
| } |
| printf("Error - device does not support VK_FORMAT_B8G8R8A8_UNORM nor VK_FORMAT_R8G8B8A8_UNORM - exiting\n"); |
| exit(1); |
| } |
| |
| void VkTestFramework::Finish() {} |
| |
| // |
| // These are the default resources for TBuiltInResources, used for both |
| // - parsing this string for the case where the user didn't supply one |
| // - dumping out a template for user construction of a config file |
| // |
| static const char *DefaultConfig = |
| "MaxLights 32\n" |
| "MaxClipPlanes 6\n" |
| "MaxTextureUnits 32\n" |
| "MaxTextureCoords 32\n" |
| "MaxVertexAttribs 64\n" |
| "MaxVertexUniformComponents 4096\n" |
| "MaxVaryingFloats 64\n" |
| "MaxVertexTextureImageUnits 32\n" |
| "MaxCombinedTextureImageUnits 80\n" |
| "MaxTextureImageUnits 32\n" |
| "MaxFragmentUniformComponents 4096\n" |
| "MaxDrawBuffers 32\n" |
| "MaxVertexUniformVectors 128\n" |
| "MaxVaryingVectors 8\n" |
| "MaxFragmentUniformVectors 16\n" |
| "MaxVertexOutputVectors 16\n" |
| "MaxFragmentInputVectors 15\n" |
| "MinProgramTexelOffset -8\n" |
| "MaxProgramTexelOffset 7\n" |
| "MaxClipDistances 8\n" |
| "MaxComputeWorkGroupCountX 65535\n" |
| "MaxComputeWorkGroupCountY 65535\n" |
| "MaxComputeWorkGroupCountZ 65535\n" |
| "MaxComputeWorkGroupSizeX 1024\n" |
| "MaxComputeWorkGroupSizeY 1024\n" |
| "MaxComputeWorkGroupSizeZ 64\n" |
| "MaxComputeUniformComponents 1024\n" |
| "MaxComputeTextureImageUnits 16\n" |
| "MaxComputeImageUniforms 8\n" |
| "MaxComputeAtomicCounters 8\n" |
| "MaxComputeAtomicCounterBuffers 1\n" |
| "MaxVaryingComponents 60\n" |
| "MaxVertexOutputComponents 64\n" |
| "MaxGeometryInputComponents 64\n" |
| "MaxGeometryOutputComponents 128\n" |
| "MaxFragmentInputComponents 128\n" |
| "MaxImageUnits 8\n" |
| "MaxCombinedImageUnitsAndFragmentOutputs 8\n" |
| "MaxCombinedShaderOutputResources 8\n" |
| "MaxImageSamples 0\n" |
| "MaxVertexImageUniforms 0\n" |
| "MaxTessControlImageUniforms 0\n" |
| "MaxTessEvaluationImageUniforms 0\n" |
| "MaxGeometryImageUniforms 0\n" |
| "MaxFragmentImageUniforms 8\n" |
| "MaxCombinedImageUniforms 8\n" |
| "MaxGeometryTextureImageUnits 16\n" |
| "MaxGeometryOutputVertices 256\n" |
| "MaxGeometryTotalOutputComponents 1024\n" |
| "MaxGeometryUniformComponents 1024\n" |
| "MaxGeometryVaryingComponents 64\n" |
| "MaxTessControlInputComponents 128\n" |
| "MaxTessControlOutputComponents 128\n" |
| "MaxTessControlTextureImageUnits 16\n" |
| "MaxTessControlUniformComponents 1024\n" |
| "MaxTessControlTotalOutputComponents 4096\n" |
| "MaxTessEvaluationInputComponents 128\n" |
| "MaxTessEvaluationOutputComponents 128\n" |
| "MaxTessEvaluationTextureImageUnits 16\n" |
| "MaxTessEvaluationUniformComponents 1024\n" |
| "MaxTessPatchComponents 120\n" |
| "MaxPatchVertices 32\n" |
| "MaxTessGenLevel 64\n" |
| "MaxViewports 16\n" |
| "MaxVertexAtomicCounters 0\n" |
| "MaxTessControlAtomicCounters 0\n" |
| "MaxTessEvaluationAtomicCounters 0\n" |
| "MaxGeometryAtomicCounters 0\n" |
| "MaxFragmentAtomicCounters 8\n" |
| "MaxCombinedAtomicCounters 8\n" |
| "MaxAtomicCounterBindings 1\n" |
| "MaxVertexAtomicCounterBuffers 0\n" |
| "MaxTessControlAtomicCounterBuffers 0\n" |
| "MaxTessEvaluationAtomicCounterBuffers 0\n" |
| "MaxGeometryAtomicCounterBuffers 0\n" |
| "MaxFragmentAtomicCounterBuffers 1\n" |
| "MaxCombinedAtomicCounterBuffers 1\n" |
| "MaxAtomicCounterBufferSize 16384\n" |
| "MaxTransformFeedbackBuffers 4\n" |
| "MaxTransformFeedbackInterleavedComponents 64\n" |
| "MaxCullDistances 8\n" |
| "MaxCombinedClipAndCullDistances 8\n" |
| "MaxSamples 4\n" |
| "MaxMeshOutputVerticesNV 256\n" |
| "MaxMeshOutputPrimitivesNV 512\n" |
| "MaxMeshWorkGroupSizeX_NV 32\n" |
| "MaxMeshWorkGroupSizeY_NV 1\n" |
| "MaxMeshWorkGroupSizeZ_NV 1\n" |
| "MaxTaskWorkGroupSizeX_NV 32\n" |
| "MaxTaskWorkGroupSizeY_NV 1\n" |
| "MaxTaskWorkGroupSizeZ_NV 1\n" |
| "MaxMeshViewCountNV 4\n" |
| |
| "nonInductiveForLoops 1\n" |
| "whileLoops 1\n" |
| "doWhileLoops 1\n" |
| "generalUniformIndexing 1\n" |
| "generalAttributeMatrixVectorIndexing 1\n" |
| "generalVaryingIndexing 1\n" |
| "generalSamplerIndexing 1\n" |
| "generalVariableIndexing 1\n" |
| "generalConstantMatrixVectorIndexing 1\n"; |
| |
| // |
| // *.conf => this is a config file that can set limits/resources |
| // |
| bool VkTestFramework::SetConfigFile(const std::string &name) { |
| if (name.size() < 5) return false; |
| |
| if (name.compare(name.size() - 5, 5, ".conf") == 0) { |
| ConfigFile = name; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| // |
| // Parse either a .conf file provided by the user or the default string above. |
| // |
| void VkTestFramework::ProcessConfigFile(VkPhysicalDeviceLimits const *const device_limits) { |
| char **configStrings = 0; |
| char *config = 0; |
| bool config_file_specified = false; |
| if (ConfigFile.size() > 0) { |
| configStrings = ReadFileData(ConfigFile.c_str()); |
| if (configStrings) { |
| config = *configStrings; |
| config_file_specified = true; |
| } else { |
| printf("Error opening configuration file; will instead use the default configuration\n"); |
| } |
| } |
| |
| if (config == 0) { |
| config = (char *)alloca(strlen(DefaultConfig) + 1); |
| strcpy(config, DefaultConfig); |
| } |
| |
| const char *delims = " \t\n\r"; |
| const char *token = strtok(config, delims); |
| while (token) { |
| const char *valueStr = strtok(0, delims); |
| if (valueStr == 0 || !(valueStr[0] == '-' || (valueStr[0] >= '0' && valueStr[0] <= '9'))) { |
| printf("Error: '%s' bad .conf file. Each name must be followed by one number.\n", valueStr ? valueStr : ""); |
| return; |
| } |
| int value = atoi(valueStr); |
| |
| if (strcmp(token, "MaxLights") == 0) |
| Resources.maxLights = value; |
| else if (strcmp(token, "MaxClipPlanes") == 0) |
| Resources.maxClipPlanes = value; |
| else if (strcmp(token, "MaxTextureUnits") == 0) |
| Resources.maxTextureUnits = value; |
| else if (strcmp(token, "MaxTextureCoords") == 0) |
| Resources.maxTextureCoords = value; |
| else if (strcmp(token, "MaxVertexAttribs") == 0) |
| Resources.maxVertexAttribs = value; |
| else if (strcmp(token, "MaxVertexUniformComponents") == 0) |
| Resources.maxVertexUniformComponents = value; |
| else if (strcmp(token, "MaxVaryingFloats") == 0) |
| Resources.maxVaryingFloats = value; |
| else if (strcmp(token, "MaxVertexTextureImageUnits") == 0) |
| Resources.maxVertexTextureImageUnits = value; |
| else if (strcmp(token, "MaxCombinedTextureImageUnits") == 0) |
| Resources.maxCombinedTextureImageUnits = value; |
| else if (strcmp(token, "MaxTextureImageUnits") == 0) |
| Resources.maxTextureImageUnits = value; |
| else if (strcmp(token, "MaxFragmentUniformComponents") == 0) |
| Resources.maxFragmentUniformComponents = value; |
| else if (strcmp(token, "MaxDrawBuffers") == 0) |
| Resources.maxDrawBuffers = value; |
| else if (strcmp(token, "MaxVertexUniformVectors") == 0) |
| Resources.maxVertexUniformVectors = value; |
| else if (strcmp(token, "MaxVaryingVectors") == 0) |
| Resources.maxVaryingVectors = value; |
| else if (strcmp(token, "MaxFragmentUniformVectors") == 0) |
| Resources.maxFragmentUniformVectors = value; |
| else if (strcmp(token, "MaxVertexOutputVectors") == 0) |
| Resources.maxVertexOutputVectors = value; |
| else if (strcmp(token, "MaxFragmentInputVectors") == 0) |
| Resources.maxFragmentInputVectors = value; |
| else if (strcmp(token, "MinProgramTexelOffset") == 0) |
| Resources.minProgramTexelOffset = value; |
| else if (strcmp(token, "MaxProgramTexelOffset") == 0) |
| Resources.maxProgramTexelOffset = value; |
| else if (strcmp(token, "MaxClipDistances") == 0) |
| Resources.maxClipDistances = (config_file_specified ? value : device_limits->maxClipDistances); |
| else if (strcmp(token, "MaxComputeWorkGroupCountX") == 0) |
| Resources.maxComputeWorkGroupCountX = (config_file_specified ? value : device_limits->maxComputeWorkGroupCount[0]); |
| else if (strcmp(token, "MaxComputeWorkGroupCountY") == 0) |
| Resources.maxComputeWorkGroupCountY = (config_file_specified ? value : device_limits->maxComputeWorkGroupCount[1]); |
| else if (strcmp(token, "MaxComputeWorkGroupCountZ") == 0) |
| Resources.maxComputeWorkGroupCountZ = (config_file_specified ? value : device_limits->maxComputeWorkGroupCount[2]); |
| else if (strcmp(token, "MaxComputeWorkGroupSizeX") == 0) |
| Resources.maxComputeWorkGroupSizeX = (config_file_specified ? value : device_limits->maxComputeWorkGroupSize[0]); |
| else if (strcmp(token, "MaxComputeWorkGroupSizeY") == 0) |
| Resources.maxComputeWorkGroupSizeY = (config_file_specified ? value : device_limits->maxComputeWorkGroupSize[1]); |
| else if (strcmp(token, "MaxComputeWorkGroupSizeZ") == 0) |
| Resources.maxComputeWorkGroupSizeZ = (config_file_specified ? value : device_limits->maxComputeWorkGroupSize[2]); |
| else if (strcmp(token, "MaxComputeUniformComponents") == 0) |
| Resources.maxComputeUniformComponents = value; |
| else if (strcmp(token, "MaxComputeTextureImageUnits") == 0) |
| Resources.maxComputeTextureImageUnits = value; |
| else if (strcmp(token, "MaxComputeImageUniforms") == 0) |
| Resources.maxComputeImageUniforms = value; |
| else if (strcmp(token, "MaxComputeAtomicCounters") == 0) |
| Resources.maxComputeAtomicCounters = value; |
| else if (strcmp(token, "MaxComputeAtomicCounterBuffers") == 0) |
| Resources.maxComputeAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxVaryingComponents") == 0) |
| Resources.maxVaryingComponents = value; |
| else if (strcmp(token, "MaxVertexOutputComponents") == 0) |
| Resources.maxVertexOutputComponents = (config_file_specified ? value : device_limits->maxVertexOutputComponents); |
| else if (strcmp(token, "MaxGeometryInputComponents") == 0) |
| Resources.maxGeometryInputComponents = (config_file_specified ? value : device_limits->maxGeometryInputComponents); |
| else if (strcmp(token, "MaxGeometryOutputComponents") == 0) |
| Resources.maxGeometryOutputComponents = (config_file_specified ? value : device_limits->maxGeometryOutputComponents); |
| else if (strcmp(token, "MaxFragmentInputComponents") == 0) |
| Resources.maxFragmentInputComponents = (config_file_specified ? value : device_limits->maxFragmentInputComponents); |
| else if (strcmp(token, "MaxImageUnits") == 0) |
| Resources.maxImageUnits = value; |
| else if (strcmp(token, "MaxCombinedImageUnitsAndFragmentOutputs") == 0) |
| Resources.maxCombinedImageUnitsAndFragmentOutputs = value; |
| else if (strcmp(token, "MaxCombinedShaderOutputResources") == 0) |
| Resources.maxCombinedShaderOutputResources = value; |
| else if (strcmp(token, "MaxImageSamples") == 0) |
| Resources.maxImageSamples = value; |
| else if (strcmp(token, "MaxVertexImageUniforms") == 0) |
| Resources.maxVertexImageUniforms = value; |
| else if (strcmp(token, "MaxTessControlImageUniforms") == 0) |
| Resources.maxTessControlImageUniforms = value; |
| else if (strcmp(token, "MaxTessEvaluationImageUniforms") == 0) |
| Resources.maxTessEvaluationImageUniforms = value; |
| else if (strcmp(token, "MaxGeometryImageUniforms") == 0) |
| Resources.maxGeometryImageUniforms = value; |
| else if (strcmp(token, "MaxFragmentImageUniforms") == 0) |
| Resources.maxFragmentImageUniforms = value; |
| else if (strcmp(token, "MaxCombinedImageUniforms") == 0) |
| Resources.maxCombinedImageUniforms = value; |
| else if (strcmp(token, "MaxGeometryTextureImageUnits") == 0) |
| Resources.maxGeometryTextureImageUnits = value; |
| else if (strcmp(token, "MaxGeometryOutputVertices") == 0) |
| Resources.maxGeometryOutputVertices = (config_file_specified ? value : device_limits->maxGeometryOutputVertices); |
| else if (strcmp(token, "MaxGeometryTotalOutputComponents") == 0) |
| Resources.maxGeometryTotalOutputComponents = |
| (config_file_specified ? value : device_limits->maxGeometryTotalOutputComponents); |
| else if (strcmp(token, "MaxGeometryUniformComponents") == 0) |
| Resources.maxGeometryUniformComponents = value; |
| else if (strcmp(token, "MaxGeometryVaryingComponents") == 0) |
| Resources.maxGeometryVaryingComponents = value; |
| else if (strcmp(token, "MaxTessControlInputComponents") == 0) |
| Resources.maxTessControlInputComponents = value; |
| else if (strcmp(token, "MaxTessControlOutputComponents") == 0) |
| Resources.maxTessControlOutputComponents = value; |
| else if (strcmp(token, "MaxTessControlTextureImageUnits") == 0) |
| Resources.maxTessControlTextureImageUnits = value; |
| else if (strcmp(token, "MaxTessControlUniformComponents") == 0) |
| Resources.maxTessControlUniformComponents = value; |
| else if (strcmp(token, "MaxTessControlTotalOutputComponents") == 0) |
| Resources.maxTessControlTotalOutputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationInputComponents") == 0) |
| Resources.maxTessEvaluationInputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationOutputComponents") == 0) |
| Resources.maxTessEvaluationOutputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationTextureImageUnits") == 0) |
| Resources.maxTessEvaluationTextureImageUnits = value; |
| else if (strcmp(token, "MaxTessEvaluationUniformComponents") == 0) |
| Resources.maxTessEvaluationUniformComponents = value; |
| else if (strcmp(token, "MaxTessPatchComponents") == 0) |
| Resources.maxTessPatchComponents = value; |
| else if (strcmp(token, "MaxPatchVertices") == 0) |
| Resources.maxPatchVertices = value; |
| else if (strcmp(token, "MaxTessGenLevel") == 0) |
| Resources.maxTessGenLevel = value; |
| else if (strcmp(token, "MaxViewports") == 0) |
| Resources.maxViewports = (config_file_specified ? value : device_limits->maxViewports); |
| else if (strcmp(token, "MaxVertexAtomicCounters") == 0) |
| Resources.maxVertexAtomicCounters = value; |
| else if (strcmp(token, "MaxTessControlAtomicCounters") == 0) |
| Resources.maxTessControlAtomicCounters = value; |
| else if (strcmp(token, "MaxTessEvaluationAtomicCounters") == 0) |
| Resources.maxTessEvaluationAtomicCounters = value; |
| else if (strcmp(token, "MaxGeometryAtomicCounters") == 0) |
| Resources.maxGeometryAtomicCounters = value; |
| else if (strcmp(token, "MaxFragmentAtomicCounters") == 0) |
| Resources.maxFragmentAtomicCounters = value; |
| else if (strcmp(token, "MaxCombinedAtomicCounters") == 0) |
| Resources.maxCombinedAtomicCounters = value; |
| else if (strcmp(token, "MaxAtomicCounterBindings") == 0) |
| Resources.maxAtomicCounterBindings = value; |
| else if (strcmp(token, "MaxVertexAtomicCounterBuffers") == 0) |
| Resources.maxVertexAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxTessControlAtomicCounterBuffers") == 0) |
| Resources.maxTessControlAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxTessEvaluationAtomicCounterBuffers") == 0) |
| Resources.maxTessEvaluationAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxGeometryAtomicCounterBuffers") == 0) |
| Resources.maxGeometryAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxFragmentAtomicCounterBuffers") == 0) |
| Resources.maxFragmentAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxCombinedAtomicCounterBuffers") == 0) |
| Resources.maxCombinedAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxAtomicCounterBufferSize") == 0) |
| Resources.maxAtomicCounterBufferSize = value; |
| else if (strcmp(token, "MaxTransformFeedbackBuffers") == 0) |
| Resources.maxTransformFeedbackBuffers = value; |
| else if (strcmp(token, "MaxTransformFeedbackInterleavedComponents") == 0) |
| Resources.maxTransformFeedbackInterleavedComponents = value; |
| else if (strcmp(token, "MaxCullDistances") == 0) |
| Resources.maxCullDistances = (config_file_specified ? value : device_limits->maxCullDistances); |
| else if (strcmp(token, "MaxCombinedClipAndCullDistances") == 0) |
| Resources.maxCombinedClipAndCullDistances = value; |
| else if (strcmp(token, "MaxSamples") == 0) |
| Resources.maxSamples = value; |
| else if (strcmp(token, "MaxMeshOutputVerticesNV") == 0) |
| Resources.maxMeshOutputVerticesNV = value; |
| else if (strcmp(token, "MaxMeshOutputPrimitivesNV") == 0) |
| Resources.maxMeshOutputPrimitivesNV = value; |
| else if (strcmp(token, "MaxMeshWorkGroupSizeX_NV") == 0) |
| Resources.maxMeshWorkGroupSizeX_NV = value; |
| else if (strcmp(token, "MaxMeshWorkGroupSizeY_NV") == 0) |
| Resources.maxMeshWorkGroupSizeY_NV = value; |
| else if (strcmp(token, "MaxMeshWorkGroupSizeZ_NV") == 0) |
| Resources.maxMeshWorkGroupSizeZ_NV = value; |
| else if (strcmp(token, "MaxTaskWorkGroupSizeX_NV") == 0) |
| Resources.maxTaskWorkGroupSizeX_NV = value; |
| else if (strcmp(token, "MaxTaskWorkGroupSizeY_NV") == 0) |
| Resources.maxTaskWorkGroupSizeY_NV = value; |
| else if (strcmp(token, "MaxTaskWorkGroupSizeZ_NV") == 0) |
| Resources.maxTaskWorkGroupSizeZ_NV = value; |
| else if (strcmp(token, "MaxMeshViewCountNV") == 0) |
| Resources.maxMeshViewCountNV = value; |
| |
| else if (strcmp(token, "nonInductiveForLoops") == 0) |
| Resources.limits.nonInductiveForLoops = (value != 0); |
| else if (strcmp(token, "whileLoops") == 0) |
| Resources.limits.whileLoops = (value != 0); |
| else if (strcmp(token, "doWhileLoops") == 0) |
| Resources.limits.doWhileLoops = (value != 0); |
| else if (strcmp(token, "generalUniformIndexing") == 0) |
| Resources.limits.generalUniformIndexing = (value != 0); |
| else if (strcmp(token, "generalAttributeMatrixVectorIndexing") == 0) |
| Resources.limits.generalAttributeMatrixVectorIndexing = (value != 0); |
| else if (strcmp(token, "generalVaryingIndexing") == 0) |
| Resources.limits.generalVaryingIndexing = (value != 0); |
| else if (strcmp(token, "generalSamplerIndexing") == 0) |
| Resources.limits.generalSamplerIndexing = (value != 0); |
| else if (strcmp(token, "generalVariableIndexing") == 0) |
| Resources.limits.generalVariableIndexing = (value != 0); |
| else if (strcmp(token, "generalConstantMatrixVectorIndexing") == 0) |
| Resources.limits.generalConstantMatrixVectorIndexing = (value != 0); |
| else |
| printf("Warning: unrecognized limit (%s) in configuration file.\n", token); |
| |
| token = strtok(0, delims); |
| } |
| if (configStrings) FreeFileData(configStrings); |
| } |
| |
| void VkTestFramework::SetMessageOptions(EShMessages &messages) { |
| if (m_compile_options & EOptionRelaxedErrors) messages = (EShMessages)(messages | EShMsgRelaxedErrors); |
| if (m_compile_options & EOptionIntermediate) messages = (EShMessages)(messages | EShMsgAST); |
| if (m_compile_options & EOptionSuppressWarnings) messages = (EShMessages)(messages | EShMsgSuppressWarnings); |
| } |
| |
| // |
| // Malloc a string of sufficient size and read a string into it. |
| // |
| char **VkTestFramework::ReadFileData(const char *fileName) { |
| FILE *in; |
| #if defined(_WIN32) && defined(__GNUC__) |
| in = fopen(fileName, "r"); |
| int errorCode = in ? 0 : 1; |
| #else |
| int errorCode = fopen_s(&in, fileName, "r"); |
| #endif |
| |
| char *fdata; |
| size_t count = 0; |
| const int maxSourceStrings = 5; |
| char **return_data = (char **)malloc(sizeof(char *) * (maxSourceStrings + 1)); |
| |
| if (errorCode) { |
| printf("Error: unable to open input file: %s\n", fileName); |
| return 0; |
| } |
| |
| while (fgetc(in) != EOF) count++; |
| |
| fseek(in, 0, SEEK_SET); |
| |
| if (!(fdata = (char *)malloc(count + 2))) { |
| printf("Error allocating memory\n"); |
| return 0; |
| } |
| if (fread(fdata, 1, count, in) != count) { |
| printf("Error reading input file: %s\n", fileName); |
| return 0; |
| } |
| fdata[count] = '\0'; |
| fclose(in); |
| if (count == 0) { |
| return_data[0] = (char *)malloc(count + 2); |
| return_data[0][0] = '\0'; |
| m_num_shader_strings = 0; |
| return return_data; |
| } else |
| m_num_shader_strings = 1; |
| |
| size_t len = (int)(ceil)((float)count / (float)m_num_shader_strings); |
| size_t ptr_len = 0, i = 0; |
| while (count > 0) { |
| return_data[i] = (char *)malloc(len + 2); |
| memcpy(return_data[i], fdata + ptr_len, len); |
| return_data[i][len] = '\0'; |
| count -= (len); |
| ptr_len += (len); |
| if (count < len) { |
| if (count == 0) { |
| m_num_shader_strings = (i + 1); |
| break; |
| } |
| len = count; |
| } |
| ++i; |
| } |
| return return_data; |
| } |
| |
| void VkTestFramework::FreeFileData(char **data) { |
| for (int i = 0; i < m_num_shader_strings; i++) free(data[i]); |
| } |
| |
| // |
| // Deduce the language from the filename. Files must end in one of the |
| // following extensions: |
| // |
| // .vert = vertex |
| // .tesc = tessellation control |
| // .tese = tessellation evaluation |
| // .geom = geometry |
| // .frag = fragment |
| // .comp = compute |
| // |
| EShLanguage VkTestFramework::FindLanguage(const std::string &name) { |
| size_t ext = name.rfind('.'); |
| if (ext == std::string::npos) { |
| return EShLangVertex; |
| } |
| |
| std::string suffix = name.substr(ext + 1, std::string::npos); |
| if (suffix == "vert") |
| return EShLangVertex; |
| else if (suffix == "tesc") |
| return EShLangTessControl; |
| else if (suffix == "tese") |
| return EShLangTessEvaluation; |
| else if (suffix == "geom") |
| return EShLangGeometry; |
| else if (suffix == "frag") |
| return EShLangFragment; |
| else if (suffix == "comp") |
| return EShLangCompute; |
| |
| return EShLangVertex; |
| } |
| |
| // |
| // Convert VK shader type to compiler's |
| // |
| EShLanguage VkTestFramework::FindLanguage(const VkShaderStageFlagBits shader_type) { |
| switch (shader_type) { |
| case VK_SHADER_STAGE_VERTEX_BIT: |
| return EShLangVertex; |
| |
| case VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT: |
| return EShLangTessControl; |
| |
| case VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT: |
| return EShLangTessEvaluation; |
| |
| case VK_SHADER_STAGE_GEOMETRY_BIT: |
| return EShLangGeometry; |
| |
| case VK_SHADER_STAGE_FRAGMENT_BIT: |
| return EShLangFragment; |
| |
| case VK_SHADER_STAGE_COMPUTE_BIT: |
| return EShLangCompute; |
| |
| case VK_SHADER_STAGE_RAYGEN_BIT_KHR: |
| return EShLangRayGen; |
| |
| case VK_SHADER_STAGE_ANY_HIT_BIT_KHR: |
| return EShLangAnyHit; |
| |
| case VK_SHADER_STAGE_CLOSEST_HIT_BIT_KHR: |
| return EShLangClosestHit; |
| |
| case VK_SHADER_STAGE_MISS_BIT_KHR: |
| return EShLangMiss; |
| |
| case VK_SHADER_STAGE_INTERSECTION_BIT_KHR: |
| return EShLangIntersect; |
| |
| case VK_SHADER_STAGE_CALLABLE_BIT_KHR: |
| return EShLangCallable; |
| |
| case VK_SHADER_STAGE_TASK_BIT_NV: |
| return EShLangTaskNV; |
| |
| case VK_SHADER_STAGE_MESH_BIT_NV: |
| return EShLangMeshNV; |
| |
| default: |
| return EShLangVertex; |
| } |
| } |
| |
| // |
| // Compile a given string containing GLSL into SPV for use by VK |
| // Return value of false means an error was encountered. |
| // |
| bool VkTestFramework::GLSLtoSPV(VkPhysicalDeviceLimits const *const device_limits, const VkShaderStageFlagBits shader_type, |
| const char *pshader, std::vector<uint32_t> &spirv, bool debug, const spv_target_env spv_env) { |
| glslang::TProgram program; |
| const char *shaderStrings[1]; |
| |
| // TODO: Do we want to load a special config file depending on the |
| // shader source? Optional name maybe? |
| // SetConfigFile(fileName); |
| |
| ProcessConfigFile(device_limits); |
| |
| EShMessages messages = EShMsgDefault; |
| SetMessageOptions(messages); |
| messages = static_cast<EShMessages>(messages | EShMsgSpvRules | EShMsgVulkanRules); |
| if (debug) { |
| messages = static_cast<EShMessages>(messages | EShMsgDebugInfo); |
| } |
| |
| EShLanguage stage = FindLanguage(shader_type); |
| glslang::TShader *shader = new glslang::TShader(stage); |
| VkShaderObj::GlslangTargetEnv glslang_env(spv_env); |
| shader->setEnvTarget(glslang::EshTargetSpv, glslang_env); |
| shader->setEnvClient(glslang::EShClientVulkan, glslang_env); |
| |
| shaderStrings[0] = pshader; |
| shader->setStrings(shaderStrings, 1); |
| |
| if (!shader->parse(&Resources, (m_compile_options & EOptionDefaultDesktop) ? 110 : 100, false, messages)) { |
| if (!(m_compile_options & EOptionSuppressInfolog)) { |
| puts(shader->getInfoLog()); |
| puts(shader->getInfoDebugLog()); |
| } |
| |
| return false; // something didn't work |
| } |
| |
| program.addShader(shader); |
| |
| // |
| // Program-level processing... |
| // |
| |
| if (!program.link(messages)) { |
| if (!(m_compile_options & EOptionSuppressInfolog)) { |
| puts(shader->getInfoLog()); |
| puts(shader->getInfoDebugLog()); |
| } |
| |
| return false; |
| } |
| |
| if (m_compile_options & EOptionDumpReflection) { |
| program.buildReflection(); |
| program.dumpReflection(); |
| } |
| |
| glslang::SpvOptions spv_options; |
| if (debug) { |
| spv_options.generateDebugInfo = true; |
| } |
| glslang::GlslangToSpv(*program.getIntermediate(stage), spirv, &spv_options); |
| |
| // |
| // Test the different modes of SPIR-V modification |
| // |
| if (this->m_canonicalize_spv) { |
| spv::spirvbin_t(0).remap(spirv, spv::spirvbin_t::ALL_BUT_STRIP); |
| } |
| |
| if (this->m_strip_spv) { |
| spv::spirvbin_t(0).remap(spirv, spv::spirvbin_t::STRIP); |
| } |
| |
| if (this->m_do_everything_spv) { |
| spv::spirvbin_t(0).remap(spirv, spv::spirvbin_t::DO_EVERYTHING); |
| } |
| |
| delete shader; |
| |
| return true; |
| } |
| |
| // |
| // Compile a given string containing SPIR-V assembly into SPV for use by VK |
| // Return value of false means an error was encountered. |
| // |
| bool VkTestFramework::ASMtoSPV(const spv_target_env target_env, const uint32_t options, const char *pasm, |
| std::vector<uint32_t> &spv) { |
| spv_binary binary; |
| spv_diagnostic diagnostic = nullptr; |
| spv_context context = spvContextCreate(target_env); |
| spv_result_t error = spvTextToBinaryWithOptions(context, pasm, strlen(pasm), options, &binary, &diagnostic); |
| spvContextDestroy(context); |
| if (error) { |
| spvDiagnosticPrint(diagnostic); |
| spvDiagnosticDestroy(diagnostic); |
| return false; |
| } |
| spv.insert(spv.end(), binary->code, binary->code + binary->wordCount); |
| spvBinaryDestroy(binary); |
| |
| return true; |
| } |
