| # ~~~ |
| # Copyright (c) 2014-2021 Valve Corporation |
| # Copyright (c) 2014-2021 LunarG, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ~~~ |
| |
| # CMake project initialization --------------------------------------------------------------------------------------------------- |
| # This section contains pre-project() initialization, and ends with the project() command. |
| |
| cmake_minimum_required(VERSION 3.10.2) |
| |
| # Apple: Must be set before enable_language() or project() as it may influence configuration of the toolchain and flags. |
| set(CMAKE_OSX_DEPLOYMENT_TARGET "10.12" CACHE STRING "Minimum OS X deployment version") |
| |
| project(Vulkan-ValidationLayers) |
| |
| set(CMAKE_EXPORT_COMPILE_COMMANDS ON) |
| |
| enable_testing() |
| |
| # User-interface declarations ---------------------------------------------------------------------------------------------------- |
| # This section contains variables that affect development GUIs (e.g. CMake GUI and IDEs), such as option(), folders, and variables |
| # with the CACHE property. |
| |
| set(VVL_CPP_STANDARD 11 CACHE STRING "Set the C++ standard to build against. The value will be passed to cmake's CXX_STANDARD property.") |
| |
| option(VVL_ENABLE_ASAN "Use address sanitization (specifically -fsanitize=address)" OFF) |
| |
| option(BUILD_TESTS "Build the tests" OFF) |
| |
| # API_NAME allows renaming builds to avoid conflicts with installed SDKs. It is referenced by layers/vk_loader_platform.h |
| set(API_NAME "Vulkan" CACHE STRING "API name to use when building") |
| string(TOLOWER ${API_NAME} API_LOWERCASE) |
| add_definitions(-DAPI_NAME="${API_NAME}") |
| |
| # Enable beta Vulkan extensions |
| add_definitions(-DVK_ENABLE_BETA_EXTENSIONS) |
| |
| set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_CURRENT_SOURCE_DIR}/cmake") |
| |
| if (UPDATE_DEPS) |
| find_package(PythonInterp 3 REQUIRED) |
| |
| if (CMAKE_GENERATOR_PLATFORM) |
| set(_target_arch ${CMAKE_GENERATOR_PLATFORM}) |
| else() |
| message(WARNING "CMAKE_GENERATOR_PLATFORM not set. Using x64 as target architecture.") |
| set(_target_arch x64) |
| endif() |
| |
| if (NOT CMAKE_BUILD_TYPE) |
| message(WARNING "CMAKE_BUILD_TYPE not set. Using Debug for dependency build type") |
| set(_build_type Debug) |
| else() |
| set(_build_type ${CMAKE_BUILD_TYPE}) |
| endif() |
| |
| message("********************************************************************************") |
| message("* NOTE: Adding target vvl_update_deps to run as needed for updating *") |
| message("* dependencies. *") |
| message("********************************************************************************") |
| |
| set(_build_tests_arg "") |
| if (NOT BUILD_TESTS) |
| set(_build_tests_arg "--optional=tests") |
| endif() |
| |
| # Add a target so that update_deps.py will run when necessary |
| # NOTE: This is triggered off of the timestamps of known_good.json and helper.cmake |
| add_custom_command(OUTPUT ${CMAKE_CURRENT_LIST_DIR}/external/helper.cmake |
| COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_LIST_DIR}/scripts/update_deps.py --dir ${CMAKE_CURRENT_LIST_DIR}/external --arch ${_target_arch} --config ${_build_type} --generator "${CMAKE_GENERATOR}" ${_build_tests_arg} |
| DEPENDS ${CMAKE_CURRENT_LIST_DIR}/scripts/known_good.json) |
| |
| add_custom_target(vvl_update_deps DEPENDS ${CMAKE_CURRENT_LIST_DIR}/external/helper.cmake) |
| |
| # Check if update_deps.py needs to be run on first cmake run |
| if (${CMAKE_CURRENT_LIST_DIR}/scripts/known_good.json IS_NEWER_THAN ${CMAKE_CURRENT_LIST_DIR}/external/helper.cmake) |
| execute_process( |
| COMMAND ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_LIST_DIR}/scripts/update_deps.py --dir ${CMAKE_CURRENT_LIST_DIR}/external --arch ${_target_arch} --config ${_build_type} --generator "${CMAKE_GENERATOR}" ${_build_tests_arg} |
| WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR} |
| RESULT_VARIABLE _update_deps_result |
| ) |
| if (NOT (${_update_deps_result} EQUAL 0)) |
| message(FATAL_ERROR "Could not run update_deps.py which is necessary to download dependencies.") |
| endif() |
| endif() |
| include(${CMAKE_CURRENT_LIST_DIR}/external/helper.cmake) |
| else() |
| message("********************************************************************************") |
| message("* NOTE: Not adding target to run update_deps.py automatically. *") |
| message("********************************************************************************") |
| find_package(PythonInterp 3 QUIET) |
| endif() |
| |
| if (TARGET Vulkan::Headers) |
| message(STATUS "Using Vulkan headers from Vulkan::Headers target") |
| get_target_property(VulkanHeaders_INCLUDE_DIRS Vulkan::Headers INTERFACE_INCLUDE_DIRECTORIES) |
| get_target_property(VulkanRegistry_DIR Vulkan::Registry INTERFACE_INCLUDE_DIRECTORIES) |
| else() |
| find_package(VulkanHeaders REQUIRED) |
| |
| # xxxnsubtil: this should eventually be replaced by exported targets |
| add_library(Vulkan-Headers INTERFACE) |
| target_include_directories(Vulkan-Headers INTERFACE ${VulkanHeaders_INCLUDE_DIRS}) |
| add_library(Vulkan::Headers ALIAS Vulkan-Headers) |
| endif() |
| |
| option(USE_CCACHE "Use ccache" OFF) |
| if(USE_CCACHE) |
| find_program(CCACHE_FOUND ccache) |
| if(CCACHE_FOUND) |
| set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE ccache) |
| endif() |
| endif() |
| |
| set(CMAKE_POSITION_INDEPENDENT_CODE ON) |
| |
| include(GNUInstallDirs) |
| |
| if(WIN32 AND CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT) |
| # Windows: if install locations not set by user, set install prefix to "<build_dir>\install". |
| set(CMAKE_INSTALL_PREFIX "${CMAKE_BINARY_DIR}/install" CACHE PATH "default install path" FORCE) |
| endif() |
| |
| if(APPLE) |
| # CMake versions 3 or later need CMAKE_MACOSX_RPATH defined. This avoids the CMP0042 policy message. |
| set(CMAKE_MACOSX_RPATH 1) |
| endif() |
| |
| # Enable IDE GUI folders |
| set_property(GLOBAL PROPERTY USE_FOLDERS ON) |
| # "Helper" targets that don't have interesting source code should set their FOLDER property to this |
| set(LAYERS_HELPER_FOLDER "Helper Targets") |
| |
| # Options for Linux only |
| if(UNIX AND NOT APPLE) # i.e. Linux |
| include(FindPkgConfig) |
| option(BUILD_WSI_XCB_SUPPORT "Build XCB WSI support" ON) |
| option(BUILD_WSI_XLIB_SUPPORT "Build Xlib WSI support" ON) |
| option(BUILD_WSI_WAYLAND_SUPPORT "Build Wayland WSI support" ON) |
| set(DEMOS_WSI_SELECTION "XCB" CACHE STRING "Select WSI target for demos (XCB, XLIB, WAYLAND, DISPLAY)") |
| |
| if(BUILD_WSI_XCB_SUPPORT) |
| find_package(XCB REQUIRED) |
| endif() |
| |
| if(BUILD_WSI_XLIB_SUPPORT) |
| find_package(X11 REQUIRED) |
| endif() |
| |
| if(BUILD_WSI_WAYLAND_SUPPORT) |
| find_package(Wayland REQUIRED) |
| include_directories(${WAYLAND_CLIENT_INCLUDE_DIR}) |
| endif() |
| endif() |
| |
| # Platform-specific compiler switches |
| option(BUILD_WERROR "Treat compiler warnings as errors" ON) |
| if(MAKE_C_COMPILER_ID MATCHES "Clang") |
| add_compile_options(-Wconversion |
| |
| # TODO These warnings also get turned on with -Wconversion in some versions of clang. |
| # Leave off until further investigation. |
| -Wno-sign-conversion |
| -Wno-shorten-64-to-32 |
| -Wno-string-conversion |
| -Wno-implicit-int-conversion |
| -Wno-enum-enum-conversion) |
| |
| endif() |
| if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang") |
| add_compile_options(-Wall |
| -Wextra |
| -Wno-unused-parameter |
| -Wno-missing-field-initializers |
| -fno-strict-aliasing |
| -fno-builtin-memcmp |
| -fvisibility=hidden) |
| |
| # Treat warnings as errors for versions of GCC and c++11-compliant Clang versions that are shipped on Ubuntu 18.04 or older. |
| if(BUILD_WERROR) |
| if ((CMAKE_COMPILER_IS_GNUCXX AND NOT (CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 7.3.0)) OR |
| (("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang") AND (CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0.0))) |
| add_compile_options(-Werror) |
| endif() |
| endif() |
| |
| set(CMAKE_C_STANDARD 99) |
| |
| # For GCC version 7.1 or greater, we need to disable the implicit fallthrough warning since there's no consistent way to satisfy |
| # all compilers until they all accept the C++17 standard. |
| if(CMAKE_COMPILER_IS_GNUCC AND NOT (CMAKE_CXX_COMPILER_VERSION LESS 7.1)) |
| add_compile_options(-Wimplicit-fallthrough=0) |
| endif() |
| elseif(MSVC) |
| if(BUILD_WERROR) |
| # Treat warnings as errors |
| add_compile_options("/WX") |
| endif() |
| # Warn about nested declarations |
| add_compile_options("/w34456") |
| # Warn about potentially uninitialized variables |
| add_compile_options("/w34701") |
| add_compile_options("/w34703") |
| # Warn about different indirection types. |
| add_compile_options("/w34057") |
| # Warn about signed/unsigned mismatch. |
| add_compile_options("/w34245") |
| endif() |
| |
| if(MAKE_C_COMPILER_ID MATCHES "Clang") |
| add_compile_options(-Wconversion |
| |
| # TODO These warnings also get turned on with -Wconversion in some versions of clang. |
| # Leave off until further investigation. |
| -Wno-sign-conversion |
| -Wno-shorten-64-to-32 |
| -Wno-string-conversion |
| -Wno-implicit-int-conversion |
| -Wno-enum-enum-conversion) |
| |
| endif() |
| |
| option(INSTALL_TESTS "Install tests" OFF) |
| option(BUILD_LAYERS "Build layers" ON) |
| option(BUILD_LAYER_SUPPORT_FILES "Generate layer files" OFF) # For generating files when not building layers |
| option(USE_ROBIN_HOOD_HASHING "Use robin-hood-hashing" ON) |
| if (USE_ROBIN_HOOD_HASHING) |
| if(NOT ROBIN_HOOD_HASHING_INSTALL_DIR) |
| set(ROBIN_HOOD_HASHING_INSTALL_DIR $ENV{ROBIN_HOOD_HASHING_INSTALL_DIR} PATH "Path to robin-hood-hashing repository") |
| endif() |
| set(ROBIN_HOOD_HASHING_INCLUDE_DIR "${ROBIN_HOOD_HASHING_INSTALL_DIR}/src/include" PATH "Path to robin-hood-hashing/src/include") |
| endif() |
| |
| if(BUILD_TESTS) |
| set(GLSLANG_INSTALL_DIR "GLSLANG-NOTFOUND" CACHE PATH "Absolute path to a glslang install directory") |
| if(NOT GLSLANG_INSTALL_DIR AND NOT DEFINED ENV{GLSLANG_INSTALL_DIR} AND NOT TARGET glslang) |
| message(FATAL_ERROR "Must define location of glslang binaries -- see BUILD.md") |
| endif() |
| |
| # CMake command line option overrides environment variable |
| if(NOT GLSLANG_INSTALL_DIR) |
| set(GLSLANG_INSTALL_DIR $ENV{GLSLANG_INSTALL_DIR}) |
| endif() |
| |
| # CMake command line option overrides environment variable |
| if(NOT SPIRV_HEADERS_INSTALL_DIR) |
| set(SPIRV_HEADERS_INSTALL_DIR $ENV{SPIRV_HEADERS_INSTALL_DIR}) |
| endif() |
| |
| if(NOT SPIRV_TOOLS_INSTALL_DIR) |
| set(SPIRV_TOOLS_INSTALL_DIR $ENV{SPIRV_TOOLS_INSTALL_DIR}) |
| endif() |
| |
| if (NOT TARGET glslang) |
| if(NOT SPIRV_HEADERS_INSTALL_DIR) |
| message(FATAL_ERROR "Must define location of SPIRV-Headers -- see BUILD.md") |
| endif() |
| |
| message(STATUS "Using glslang install located at ${GLSLANG_INSTALL_DIR}") |
| set(GLSLANG_SEARCH_PATH "${GLSLANG_INSTALL_DIR}/lib") |
| set(GLSLANG_DEBUG_SEARCH_PATH "${GLSLANG_INSTALL_DIR}/lib") |
| set(GLSLANG_INCLUDE_DIR "${GLSLANG_INSTALL_DIR}/include" CACHE PATH "Path to glslang headers") |
| |
| set(GLSLANG_LIBRARIES glslang OGLCompiler OSDependent MachineIndependent GenericCodeGen HLSL SPIRV SPVRemapper) |
| |
| # Add glslang static libraries as imported targets |
| foreach(GLSLANG_LIBRARY ${GLSLANG_LIBRARIES}) |
| add_library(${GLSLANG_LIBRARY} STATIC IMPORTED) |
| find_library("${GLSLANG_LIBRARY}_PATH" NAMES "${GLSLANG_LIBRARY}" HINTS ${GLSLANG_SEARCH_PATH}) |
| set_target_properties(${GLSLANG_LIBRARY} |
| PROPERTIES IMPORTED_LOCATION |
| "${${GLSLANG_LIBRARY}_PATH}") |
| if (WIN32) |
| find_library("${GLSLANG_LIBRARY}_DEBUG_PATH" NAMES "${GLSLANG_LIBRARY}d" HINTS ${GLSLANG_DEBUG_SEARCH_PATH}) |
| set_target_properties(${GLSLANG_LIBRARY} |
| PROPERTIES IMPORTED_LOCATION_DEBUG |
| "${${GLSLANG_LIBRARY}_DEBUG_PATH}") |
| endif() |
| endforeach() |
| |
| # Circular dependencies exist between glslang static libs, add them all as link dependencies for each other |
| foreach(GLSLANG_LIBRARY ${GLSLANG_LIBRARIES}) |
| set_target_properties(${GLSLANG_LIBRARY} |
| PROPERTIES INTERFACE_LINK_LIBRARIES |
| "${GLSLANG_LIBRARIES}") |
| endforeach() |
| else() |
| set(GLSLANG_INCLUDE_DIR "${glslang_SOURCE_DIR}" CACHE PATH "Path to glslang headers") |
| set(GLSLANG_LIBRARIES glslang SPIRV SPVRemapper) |
| endif() |
| endif() |
| |
| if(BUILD_TESTS OR BUILD_LAYERS) |
| # spirv-tools |
| if (NOT TARGET SPIRV-Tools) |
| if(NOT SPIRV_TOOLS_INSTALL_DIR) |
| set(SPIRV_TOOLS_INSTALL_DIR "${GLSLANG_INSTALL_DIR}") |
| endif() |
| |
| set(SPIRV_HEADERS_INCLUDE_DIR "${SPIRV_HEADERS_INSTALL_DIR}/include" CACHE PATH "Path to spirv-headers") |
| set(SPIRV_TOOLS_BINARY_ROOT "${SPIRV_TOOLS_INSTALL_DIR}/lib" |
| CACHE PATH "User defined path to the SPIRV-Tools binaries for this project") |
| set(SPIRV_TOOLS_OPT_BINARY_ROOT "${SPIRV_TOOLS_INSTALL_DIR}/lib" |
| CACHE PATH "User defined path to the SPIRV-Tools-opt binaries for this project") |
| set(SPIRV_TOOLS_INCLUDE_DIR "${SPIRV_TOOLS_INSTALL_DIR}/include" CACHE PATH "Path to spirv tools headers") |
| set(SPIRV_TOOLS_SEARCH_PATH "${SPIRV_TOOLS_INSTALL_DIR}/lib") |
| set(SPIRV_TOOLS_DEBUG_SEARCH_PATH "${SPIRV_TOOLS_INSTALL_DIR}/lib") |
| set(SPIRV_TOOLS_OPT_SEARCH_PATH "${SPIRV_TOOLS_INSTALL_DIR}/lib") |
| set(SPIRV_TOOLS_OPT_DEBUG_SEARCH_PATH "${SPIRV_TOOLS_INSTALL_DIR}/lib") |
| |
| find_library(SPIRV_TOOLS_LIB NAMES SPIRV-Tools HINTS ${SPIRV_TOOLS_SEARCH_PATH}) |
| find_library(SPIRV_TOOLS_OPT_LIB NAMES SPIRV-Tools-opt HINTS ${SPIRV_TOOLS_OPT_SEARCH_PATH}) |
| |
| set(SPIRV_TOOLS_LIBRARIES ${SPIRV_TOOLS_OPT_LIB} ${SPIRV_TOOLS_LIB}) |
| else() |
| set(SPIRV_TOOLS_LIBRARIES SPIRV-Tools SPIRV-Tools-opt) |
| set(SPIRV_TOOLS_INCLUDE_DIR "${spirv-tools_SOURCE_DIR}/include" CACHE PATH "Path to spirv tools headers") |
| endif() |
| endif() |
| |
| # Generate dependent helper files ------------------------------------------------------------------------------------------------ |
| |
| set(SCRIPTS_DIR "${PROJECT_SOURCE_DIR}/scripts") |
| |
| # VkLayer_utils library ---------------------------------------------------------------------------------------------------------- |
| # For Windows, we use a static lib because the Windows loader has a fairly restrictive loader search path that can't be easily |
| # modified to point it to the same directory that contains the layers. TODO: This should not be a library -- in future, include |
| # files directly in layers. |
| |
| add_library(VkLayer_utils |
| STATIC |
| layers/vk_layer_config.cpp |
| layers/vk_layer_extension_utils.cpp |
| layers/vk_layer_utils.cpp |
| layers/vk_format_utils.cpp) |
| target_link_libraries(VkLayer_utils PUBLIC Vulkan::Headers) |
| set_target_properties(VkLayer_utils PROPERTIES CXX_STANDARD ${VVL_CPP_STANDARD}) |
| if (VVL_ENABLE_ASAN) |
| target_compile_options(VkLayer_utils PRIVATE -fsanitize=address) |
| # NOTE: Use target_link_options when cmake 3.13 is available on CI |
| target_link_libraries(VkLayer_utils PRIVATE "-fsanitize=address") |
| endif() |
| if (UPDATE_DEPS) |
| add_dependencies(VkLayer_utils vvl_update_deps) |
| endif() |
| if(WIN32) |
| target_compile_definitions(VkLayer_utils PUBLIC _CRT_SECURE_NO_WARNINGS NOMINMAX) |
| if(MINGW) |
| target_compile_definitions(VkLayer_utils PUBLIC "_WIN32_WINNT=0x0600") |
| endif() |
| endif() |
| install(TARGETS VkLayer_utils DESTINATION ${CMAKE_INSTALL_LIBDIR}) |
| set_target_properties(VkLayer_utils PROPERTIES LINKER_LANGUAGE CXX) |
| target_include_directories(VkLayer_utils |
| PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/layers |
| ${CMAKE_CURRENT_SOURCE_DIR}/layers/generated |
| ${CMAKE_CURRENT_BINARY_DIR} |
| ${CMAKE_CURRENT_BINARY_DIR}/layers |
| ${PROJECT_BINARY_DIR} |
| ${VulkanHeaders_INCLUDE_DIR}) |
| |
| if (USE_ROBIN_HOOD_HASHING) |
| target_include_directories(VkLayer_utils PUBLIC ${ROBIN_HOOD_HASHING_INCLUDE_DIR}) |
| target_compile_definitions(VkLayer_utils PUBLIC USE_ROBIN_HOOD_HASHING) |
| endif() |
| |
| # uninstall target --------------------------------------------------------------------------------------------------------------- |
| if(NOT TARGET uninstall) |
| configure_file("${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in" |
| "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" |
| IMMEDIATE |
| @ONLY) |
| add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) |
| set_target_properties(uninstall PROPERTIES FOLDER ${LAYERS_HELPER_FOLDER}) |
| endif() |
| |
| # Fetch header version from vulkan_core.h ---------------------------------------------------------------------------------------- |
| file(STRINGS "${VulkanHeaders_INCLUDE_DIRS}/vulkan/vulkan_core.h" lines REGEX "^#define VK_HEADER_VERSION [0-9]+") |
| list(LENGTH lines len) |
| if(${len} EQUAL 1) |
| string(REGEX MATCHALL |
| "[0-9]+" |
| vk_header_version |
| ${lines}) |
| else() |
| message(FATAL_ERROR "Unable to fetch version from vulkan_core.h") |
| endif() |
| |
| # Optional codegen target -------------------------------------------------------------------------------------------------------- |
| if(PYTHONINTERP_FOUND) |
| add_custom_target(VulkanVL_generated_source |
| COMMAND ${PYTHON_EXECUTABLE} ${PROJECT_SOURCE_DIR}/scripts/generate_source.py |
| ${VulkanRegistry_DIR} ${SPIRV_HEADERS_INSTALL_DIR}/include/spirv/unified1/ --incremental |
| WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/layers/generated |
| ) |
| else() |
| message("WARNING: VulkanVL_generated_source target requires python 3") |
| endif() |
| |
| # Add subprojects ---------------------------------------------------------------------------------------------------------------- |
| |
| if(BUILD_TESTS) |
| # Attempt to enable googletest if available. |
| |
| if(TARGET gtest_main) |
| # Already enabled as a target (perhaps by a project enclosing this one) |
| message(STATUS "Vulkan-ValidationLayers/external: " "googletest already configured - using it") |
| elseif(IS_DIRECTORY "${GOOGLETEST_INSTALL_DIR}") |
| # The googletest directory exists, so enable it as a target. |
| message(STATUS "Vulkan-ValidationLayers/external: " "googletest found - configuring it for tests") |
| set(BUILD_GTEST ON CACHE BOOL "Builds the googletest subproject") |
| set(BUILD_GMOCK OFF CACHE BOOL "Builds the googlemock subproject") |
| set(gtest_force_shared_crt ON CACHE BOOL "Link gtest runtimes dynamically") |
| set(BUILD_SHARED_LIBS ON CACHE BOOL "Build shared libraries") |
| # EXCLUDE_FROM_ALL keeps the install target from installing GTEST files. |
| add_subdirectory("${GOOGLETEST_INSTALL_DIR}" ${CMAKE_BINARY_DIR}/googletest) |
| else() |
| message(SEND_ERROR "Could not find googletest directory. Be sure to run update_deps.py with the --tests option to download the appropriate version of googletest") |
| set(BUILD_TESTS OFF) |
| endif() |
| |
| if (WIN32) |
| set_target_properties(gtest PROPERTIES FOLDER ${LAYERS_HELPER_FOLDER}) |
| set_target_properties(gtest_main PROPERTIES FOLDER ${LAYERS_HELPER_FOLDER}) |
| endif() |
| |
| if(CMAKE_CXX_COMPILER_ID MATCHES "GNU" OR CMAKE_CXX_COMPILER_ID MATCHES "Clang") |
| set_target_properties(gtest PROPERTIES COMPILE_OPTIONS "-w") |
| set_target_properties(gtest_main PROPERTIES COMPILE_OPTIONS "-w") |
| endif() |
| |
| if (BUILD_TESTS) |
| add_subdirectory(tests ${CMAKE_BINARY_DIR}/tests) |
| endif() |
| endif() |
| |
| if(BUILD_LAYERS OR BUILD_LAYER_SUPPORT_FILES) |
| add_subdirectory(layers) |
| endif() |