| # ~~~ |
| # Copyright (c) 2014-2021 Valve Corporation |
| # Copyright (c) 2014-2021 LunarG, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ~~~ |
| |
| if(WIN32) |
| add_definitions(-DVK_USE_PLATFORM_WIN32_KHR -DVK_USE_PLATFORM_WIN32_KHX -DWIN32_LEAN_AND_MEAN) |
| add_custom_target(mk_layer_config_dir ALL |
| COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/$<CONFIG>) |
| set_target_properties(mk_layer_config_dir PROPERTIES FOLDER ${LAYERS_HELPER_FOLDER}) |
| elseif(ANDROID) |
| add_definitions(-DVK_USE_PLATFORM_ANDROID_KHR -DVK_USE_PLATFORM_ANDROID_KHX) |
| elseif(APPLE) |
| add_definitions(-DVK_USE_PLATFORM_MACOS_MVK -DVK_USE_PLATFORM_METAL_EXT) |
| if(CMAKE_GENERATOR MATCHES "^Xcode.*") |
| add_custom_target(mk_layer_config_dir ALL |
| COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/$<CONFIG>) |
| endif() |
| elseif(UNIX AND NOT APPLE) # i.e. Linux |
| if(BUILD_WSI_XCB_SUPPORT) |
| add_definitions(-DVK_USE_PLATFORM_XCB_KHR -DVK_USE_PLATFORM_XCB_KHX) |
| endif() |
| |
| if(BUILD_WSI_XLIB_SUPPORT) |
| add_definitions(-DVK_USE_PLATFORM_XLIB_KHR -DVK_USE_PLATFORM_XLIB_KHX -DVK_USE_PLATFORM_XLIB_XRANDR_EXT) |
| endif() |
| |
| if(BUILD_WSI_WAYLAND_SUPPORT) |
| add_definitions(-DVK_USE_PLATFORM_WAYLAND_KHR -DVK_USE_PLATFORM_WAYLAND_KHX) |
| endif() |
| else() |
| message(FATAL_ERROR "Unsupported Platform!") |
| endif() |
| |
| # Configure installation of source files that are dependencies of other repos. |
| if(BUILD_LAYER_SUPPORT_FILES) |
| set(LAYER_UTIL_FILES |
| cast_utils.h |
| hash_util.h |
| hash_vk_types.h |
| vk_format_utils.h |
| vk_format_utils.cpp |
| vk_layer_config.h |
| vk_layer_config.cpp |
| vk_layer_data.h |
| vk_layer_extension_utils.h |
| vk_layer_extension_utils.cpp |
| vk_layer_logging.h |
| vk_layer_utils.h |
| vk_layer_utils.cpp |
| vk_loader_platform.h |
| xxhash.h |
| xxhash.c |
| generated/vk_validation_error_messages.h |
| generated/vk_layer_dispatch_table.h |
| generated/vk_dispatch_table_helper.h |
| generated/vk_safe_struct.h |
| generated/vk_safe_struct.cpp |
| generated/vk_enum_string_helper.h |
| generated/vk_object_types.h |
| generated/vk_extension_helper.h |
| generated/vk_typemap_helper.h) |
| install(FILES ${LAYER_UTIL_FILES} DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/vulkan) |
| endif() |
| |
| set(TARGET_NAMES |
| VkLayer_khronos_validation) |
| |
| # System-specific macro to create a library target. |
| macro(AddVkLayer target LAYER_COMPILE_DEFINITIONS) |
| add_library(VkLayer_${target} SHARED ${ARGN}) |
| set_target_properties(VkLayer_${target} PROPERTIES CXX_STANDARD ${VVL_CPP_STANDARD}) |
| target_compile_definitions(VkLayer_${target} PUBLIC ${LAYER_COMPILE_DEFINITIONS}) |
| target_link_libraries(VkLayer_${target} PRIVATE VkLayer_utils) |
| |
| if (VVL_ENABLE_ASAN) |
| target_compile_options(VkLayer_${target} PRIVATE -fsanitize=address) |
| # NOTE: Use target_link_options when cmake 3.13 is available on CI |
| target_link_libraries(VkLayer_${target} PRIVATE "-fsanitize=address") |
| endif() |
| |
| if(WIN32) |
| target_sources(VkLayer_${target} PRIVATE VkLayer_${target}.def) |
| target_compile_definitions(VkLayer_${target} PUBLIC NOMINMAX) |
| elseif(APPLE) |
| set_target_properties(VkLayer_${target} |
| PROPERTIES LINK_FLAGS |
| "-Wl" |
| INSTALL_RPATH |
| "@loader_path/") |
| else(UNIX AND NOT APPLE) # i.e.: Linux |
| set_target_properties(VkLayer_${target} PROPERTIES LINK_FLAGS "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/libVkLayer_${target}.map,-Bsymbolic,--exclude-libs,ALL") |
| endif() |
| |
| install(TARGETS VkLayer_${target} DESTINATION ${CMAKE_INSTALL_LIBDIR}) |
| endmacro() |
| |
| include_directories(${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/generated ${VulkanHeaders_INCLUDE_DIR}) |
| |
| if(MSVC) |
| # Applies to all configurations |
| add_definitions(-D_CRT_SECURE_NO_WARNINGS -DNOMINMAX) |
| # Avoid: fatal error C1128: number of sections exceeded object file format limit: compile with /bigobj |
| add_compile_options("/bigobj") |
| # Allow Windows to use multiprocessor compilation |
| add_compile_options(/MP) |
| # Turn off transitional "changed behavior" warning message for Visual Studio versions prior to 2015. The changed behavior is |
| # that constructor initializers are now fixed to clear the struct members. |
| add_compile_options("$<$<AND:$<CXX_COMPILER_ID:MSVC>,$<VERSION_LESS:$<CXX_COMPILER_VERSION>,19>>:/wd4351>") |
| else() |
| if(MINGW) |
| add_compile_options("-Wa,-mbig-obj") |
| endif() |
| set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wpointer-arith -Wno-unused-function -Wno-sign-compare") |
| set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wpointer-arith -Wno-unused-function -Wno-sign-compare") |
| endif() |
| |
| |
| if(ANNOTATED_SPEC_LINK) |
| message("-- ANNOTATED_SPEC_LINK is ${ANNOTATED_SPEC_LINK}") |
| add_definitions(-DANNOTATED_SPEC_LINK=${ANNOTATED_SPEC_LINK}) |
| endif() |
| |
| # Clang warns about unused const variables. Generated files may purposely contain unused consts, so silence this warning in Clang |
| if(CMAKE_C_COMPILER_ID MATCHES "Clang") |
| set_source_files_properties(generated/parameter_validation.cpp PROPERTIES COMPILE_FLAGS "-Wno-unused-const-variable") |
| endif() |
| |
| set(CHASSIS_LIBRARY_FILES |
| generated/chassis.cpp |
| generated/layer_chassis_dispatch.cpp |
| generated/vk_safe_struct.cpp |
| generated/vk_safe_struct.h |
| layer_options.cpp |
| state_tracker.cpp |
| state_tracker.h |
| image_layout_map.cpp |
| image_layout_map.h |
| range_vector.h |
| vk_layer_settings_ext.h |
| subresource_adapter.cpp |
| subresource_adapter.h |
| sync_utils.cpp |
| sync_utils.h) |
| |
| set(CORE_VALIDATION_LIBRARY_FILES |
| core_validation.cpp |
| core_validation.h |
| core_validation_error_enums.h |
| core_error_location.h |
| core_error_location.cpp |
| base_node.h |
| device_memory_state.h |
| device_memory_state.cpp |
| buffer_state.h |
| buffer_state.cpp |
| cmd_buffer_state.h |
| cmd_buffer_state.cpp |
| image_state.h |
| image_state.cpp |
| pipeline_state.h |
| pipeline_state.cpp |
| query_state.h |
| ray_tracing_state.h |
| render_pass_state.h |
| render_pass_state.cpp |
| sampler_state.h |
| drawdispatch.cpp |
| convert_to_renderpass2.cpp |
| descriptor_sets.cpp |
| descriptor_sets.h |
| buffer_validation.cpp |
| buffer_validation.h |
| shader_module.cpp |
| shader_module.h |
| shader_validation.cpp |
| shader_validation.h |
| sync_vuid_maps.cpp |
| sync_vuid_maps.h |
| generated/spirv_validation_helper.cpp |
| generated/spirv_grammar_helper.cpp |
| generated/command_validation.cpp |
| generated/synchronization_validation_types.cpp |
| gpu_validation.cpp |
| generated/corechecks_optick_instrumentation.cpp |
| xxhash.c) |
| |
| set(OBJECT_LIFETIMES_LIBRARY_FILES |
| generated/object_tracker.cpp |
| generated/object_tracker.h |
| object_tracker_utils.cpp |
| object_lifetime_validation.h) |
| |
| set(THREAD_SAFETY_LIBRARY_FILES |
| generated/thread_safety.cpp |
| generated/thread_safety.h) |
| |
| set(STATELESS_VALIDATION_LIBRARY_FILES |
| generated/parameter_validation.cpp |
| generated/parameter_validation.h |
| parameter_validation_utils.cpp |
| stateless_validation.h) |
| |
| set(BEST_PRACTICES_LIBRARY_FILES |
| best_practices_utils.cpp |
| generated/best_practices.cpp |
| generated/best_practices.h |
| best_practices_validation.h |
| best_practices_error_enums.h) |
| |
| set(GPU_ASSISTED_LIBRARY_FILES |
| gpu_validation.cpp |
| gpu_validation.h) |
| |
| set(DEBUG_PRINTF_LIBRARY_FILES |
| debug_printf.cpp |
| debug_printf.h) |
| |
| set(GPU_UTILITY_LIBRARY_FILES |
| gpu_utils.cpp |
| gpu_utils.h) |
| |
| set(SYNC_VALIDATION_LIBRARY_FILES |
| synchronization_validation.cpp |
| synchronization_validation.h) |
| |
| # Validation Layer performance instrumentation support using Optick. |
| # https://optick.dev/ https://github.com/bombomby/optick |
| # To include Optick instrumentation: |
| # 1) Download the Optick 1.3.1 release: https://github.com/bombomby/optick/releases/tag/1.3.1.0 |
| # 2) Copy the files from the src directory to external/optick. |
| # 3) Run CMake configure with -DINSTRUMENT_OPTICK. |
| set(OPTICK_SOURCE_DIR "${PROJECT_SOURCE_DIR}/external/optick") |
| if(INSTRUMENT_OPTICK) |
| # Optick Instrumentation currently supported only on Microsoft toolchain. |
| if(MSVC) |
| if(IS_DIRECTORY "${OPTICK_SOURCE_DIR}") |
| file(GLOB OPTICK_SOURCE_FILES "${OPTICK_SOURCE_DIR}/*.*") |
| source_group("Optick Lib" FILES ${OPTICK_SOURCE_FILES}) |
| # Disable GPU performance measurements (timestamp queries). |
| # Not needed for CPU Validation Layer measurements, but would be interesting to try someday. |
| # We'll need to map Vulkan API calls into the layer stack API entry points in order to build. |
| set(KHRONOS_LAYER_COMPILE_DEFINITIONS |
| -DINSTRUMENT_OPTICK |
| -DOPTICK_ENABLE_GPU_D3D12=0 |
| -DOPTICK_ENABLE_GPU_VULKAN=0) |
| else() |
| message(WARNING "Optick sources not found at ${OPTICK_SOURCE_DIR} - continuing without instrumentation.") |
| set(INSTRUMENT_OPTICK OFF) |
| endif() |
| else() |
| message(WARNING "Optick instrumentation not supported on this platform - continuing without instrumentation.") |
| set(INSTRUMENT_OPTICK OFF) |
| endif() |
| endif() |
| |
| if(BUILD_LAYERS) |
| AddVkLayer(khronos_validation "${KHRONOS_LAYER_COMPILE_DEFINITIONS}" |
| ${CHASSIS_LIBRARY_FILES} |
| ${CORE_VALIDATION_LIBRARY_FILES} |
| ${OBJECT_LIFETIMES_LIBRARY_FILES} |
| ${THREAD_SAFETY_LIBRARY_FILES} |
| ${STATELESS_VALIDATION_LIBRARY_FILES} |
| ${BEST_PRACTICES_LIBRARY_FILES} |
| ${GPU_UTILITY_LIBRARY_FILES} |
| ${GPU_ASSISTED_LIBRARY_FILES} |
| ${DEBUG_PRINTF_LIBRARY_FILES} |
| ${SYNC_VALIDATION_LIBRARY_FILES} |
| ${OPTICK_SOURCE_FILES}) |
| |
| # Force generation of the PDB file for Release builds. |
| # Note that CMake reduces inlining optimization levels for RelWithDebInfo builds. |
| if(MSVC) |
| target_compile_options(VkLayer_khronos_validation PRIVATE "$<$<CONFIG:Release>:/Zi>") |
| if (USE_ROBIN_HOOD_HASHING) |
| # This warning produces what look like false positives in robin_hood.h with Visual Studio 2015 |
| target_compile_options(VkLayer_khronos_validation PRIVATE "$<$<AND:$<CXX_COMPILER_ID:MSVC>,$<VERSION_LESS:$<CXX_COMPILER_VERSION>,19.1>>:/wd4996>") |
| endif() |
| # Need to use this instead of target_link_options() for older versions of CMake. |
| target_link_libraries(VkLayer_khronos_validation PRIVATE "$<$<CONFIG:Release>:-DEBUG:FULL>") |
| endif() |
| |
| # Khronos validation additional dependencies |
| target_include_directories(VkLayer_khronos_validation PRIVATE ${GLSLANG_INCLUDE_DIR}) |
| target_include_directories(VkLayer_khronos_validation PRIVATE ${SPIRV_TOOLS_INCLUDE_DIR}) |
| target_include_directories(VkLayer_khronos_validation PRIVATE ${SPIRV_HEADERS_INCLUDE_DIR}) |
| if(INSTRUMENT_OPTICK) |
| target_include_directories(VkLayer_khronos_validation PRIVATE ${OPTICK_SOURCE_DIR}) |
| endif() |
| if (USE_ROBIN_HOOD_HASHING) |
| target_include_directories(VkLayer_khronos_validation PRIVATE ${ROBIN_HOOD_HASHING_INCLUDE_DIR}) |
| endif() |
| target_link_libraries(VkLayer_khronos_validation PRIVATE ${SPIRV_TOOLS_LIBRARIES}) |
| |
| # The output file needs Unix "/" separators or Windows "\" separators On top of that, Windows separators actually need to be doubled |
| # because the json format uses backslash escapes |
| file(TO_NATIVE_PATH "./" RELATIVE_PATH_PREFIX) |
| string(REPLACE "\\" |
| "\\\\" |
| RELATIVE_PATH_PREFIX |
| "${RELATIVE_PATH_PREFIX}") |
| |
| # Run each .json.in file through the generator We need to create the generator.cmake script so that the generator can be run at |
| # compile time, instead of configure time Running at compile time lets us use cmake generator expressions (TARGET_FILE_NAME and |
| # TARGET_FILE_DIR, specifically) |
| file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/generator.cmake" "configure_file(\"\${INPUT_FILE}\" \"\${OUTPUT_FILE}\" @ONLY)") |
| foreach(TARGET_NAME ${TARGET_NAMES}) |
| set(CONFIG_DEFINES -DINPUT_FILE="${CMAKE_CURRENT_SOURCE_DIR}/json/${TARGET_NAME}.json.in" -DVK_VERSION=1.2.${vk_header_version}) |
| # If this json file is not a metalayer, get the needed properties from that target |
| if(TARGET ${TARGET_NAME}) |
| set(CONFIG_DEFINES |
| ${CONFIG_DEFINES} |
| -DOUTPUT_FILE="$<TARGET_FILE_DIR:${TARGET_NAME}>/${TARGET_NAME}.json" |
| -DRELATIVE_LAYER_BINARY="${RELATIVE_PATH_PREFIX}$<TARGET_FILE_NAME:${TARGET_NAME}>") |
| # If this json file is a metalayer, make the output path match core validation, and there is no layer binary file |
| else() |
| set(CONFIG_DEFINES ${CONFIG_DEFINES} -DOUTPUT_FILE="$<TARGET_FILE_DIR:VkLayer_khronos_validation>/${TARGET_NAME}.json") |
| endif() |
| add_custom_target(${TARGET_NAME}-json ALL |
| COMMAND ${CMAKE_COMMAND} ${CONFIG_DEFINES} -P "${CMAKE_CURRENT_BINARY_DIR}/generator.cmake") |
| if(CMAKE_GENERATOR MATCHES "^Visual Studio.*") |
| set_target_properties(${TARGET_NAME}-json PROPERTIES FOLDER ${LAYERS_HELPER_FOLDER}) |
| endif() |
| endforeach() |
| |
| # For UNIX-based systems, `library_path` should not contain a relative path (indicated by "./") before installing to system |
| # directories, so we do not include it in the staging-json files which are used for installation |
| if(UNIX) |
| foreach(TARGET_NAME ${TARGET_NAMES}) |
| set(INSTALL_DEFINES |
| -DINPUT_FILE="${CMAKE_CURRENT_SOURCE_DIR}/json/${TARGET_NAME}.json.in" |
| -DOUTPUT_FILE="${CMAKE_CURRENT_BINARY_DIR}/staging-json/${TARGET_NAME}.json" |
| -DVK_VERSION=1.2.${vk_header_version}) |
| # If this json file is not a metalayer, get the needed properties from that target |
| if(TARGET ${TARGET_NAME}) |
| set(INSTALL_DEFINES ${INSTALL_DEFINES} -DRELATIVE_LAYER_BINARY="$<TARGET_FILE_NAME:${TARGET_NAME}>") |
| endif() |
| add_custom_target(${TARGET_NAME}-staging-json ALL |
| COMMAND ${CMAKE_COMMAND} ${INSTALL_DEFINES} -P "${CMAKE_CURRENT_BINARY_DIR}/generator.cmake") |
| endforeach() |
| endif() |
| |
| # Install the layer json files |
| foreach(TARGET_NAME ${TARGET_NAMES}) |
| if(WIN32) |
| install(FILES $<TARGET_FILE_DIR:${TARGET_NAME}>/${TARGET_NAME}.json |
| DESTINATION ${CMAKE_INSTALL_LIBDIR}) |
| elseif(UNIX) |
| install(FILES ${CMAKE_CURRENT_BINARY_DIR}/staging-json/${TARGET_NAME}.json |
| DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/vulkan/explicit_layer.d) |
| endif() |
| endforeach() |
| endif() |