| /****************************************************************************** |
| * |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * Copyright(c) 2016 - 2017 Intel Deutschland GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| #ifndef SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_CMDHDR_H_ |
| #define SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_CMDHDR_H_ |
| |
| #include <stdint.h> |
| |
| #include "src/iwlwifi/platform/compiler.h" |
| |
| /** |
| * DOC: Host command section |
| * |
| * A host command is a command issued by the upper layer to the fw. There are |
| * several versions of fw that have several APIs. The transport layer is |
| * completely agnostic to these differences. |
| * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), |
| */ |
| #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) |
| #define QUEUE_TO_SEQ(q) (((q)&0x1f) << 8) |
| #define SEQ_TO_INDEX(s) ((s)&0xff) |
| #define INDEX_TO_SEQ(i) ((i)&0xff) |
| #define SEQ_RX_FRAME cpu_to_le16(0x8000) |
| |
| /* |
| * those functions retrieve specific information from |
| * the id field in the iwl_host_cmd struct which contains |
| * the command id, the group id and the version of the command |
| * and vice versa |
| */ |
| static inline uint8_t iwl_cmd_opcode(uint32_t cmdid) { return cmdid & 0xFF; } |
| |
| static inline uint8_t iwl_cmd_groupid(uint32_t cmdid) { return ((cmdid & 0xFF00) >> 8); } |
| |
| static inline uint8_t iwl_cmd_version(uint32_t cmdid) { return ((cmdid & 0xFF0000) >> 16); } |
| |
| static inline uint32_t iwl_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version) { |
| return opcode + (groupid << 8) + (version << 16); |
| } |
| |
| /* make uint16_t wide id out of uint8_t group and opcode */ |
| #define WIDE_ID(grp, opcode) ((uint16_t)(((grp) << 8) | (opcode))) |
| #define DEF_ID(opcode) ((uint16_t)((1 << 8) | (opcode))) |
| |
| /* due to the conversion, this group is special; new groups |
| * should be defined in the appropriate fw-api header files |
| */ |
| #define IWL_ALWAYS_LONG_GROUP 1 |
| |
| /** |
| * struct iwl_cmd_header - (short) command header format |
| * |
| * This header format appears in the beginning of each command sent from the |
| * driver, and each response/notification received from uCode. |
| */ |
| struct iwl_cmd_header { |
| /** |
| * @cmd: Command ID: REPLY_RXON, etc. |
| */ |
| uint8_t cmd; |
| /** |
| * @group_id: group ID, for commands with groups |
| */ |
| uint8_t group_id; |
| /** |
| * @sequence: |
| * Sequence number for the command. |
| * |
| * The driver sets up the sequence number to values of its choosing. |
| * uCode does not use this value, but passes it back to the driver |
| * when sending the response to each driver-originated command, so |
| * the driver can match the response to the command. Since the values |
| * don't get used by uCode, the driver may set up an arbitrary format. |
| * |
| * There is one exception: uCode sets bit 15 when it originates |
| * the response/notification, i.e. when the response/notification |
| * is not a direct response to a command sent by the driver. For |
| * example, uCode issues REPLY_RX when it sends a received frame |
| * to the driver; it is not a direct response to any driver command. |
| * |
| * The Linux driver uses the following format: |
| * |
| * 0:7 tfd index - position within TX queue |
| * 8:12 TX queue id |
| * 13:14 reserved |
| * 15 unsolicited RX or uCode-originated notification |
| */ |
| __le16 sequence; |
| } __packed; |
| |
| /** |
| * struct iwl_cmd_header_wide |
| * |
| * This header format appears in the beginning of each command sent from the |
| * driver, and each response/notification received from uCode. |
| * this is the wide version that contains more information about the command |
| * like length, version and command type |
| * |
| * @cmd: command ID, like in &struct iwl_cmd_header |
| * @group_id: group ID, like in &struct iwl_cmd_header |
| * @sequence: sequence, like in &struct iwl_cmd_header |
| * @length: length of the command |
| * @reserved: reserved |
| * @version: command version |
| */ |
| struct iwl_cmd_header_wide { |
| uint8_t cmd; |
| uint8_t group_id; |
| __le16 sequence; |
| __le16 length; |
| uint8_t reserved; |
| uint8_t version; |
| } __packed; |
| |
| /** |
| * struct iwl_calib_res_notif_phy_db - Receive phy db chunk after calibrations |
| * @type: type of the result - mostly ignored |
| * @length: length of the data |
| * @data: data, length in @length |
| */ |
| struct iwl_calib_res_notif_phy_db { |
| __le16 type; |
| __le16 length; |
| uint8_t data[0]; |
| } __packed; |
| |
| /** |
| * struct iwl_phy_db_cmd - configure operational ucode |
| * @type: type of the data |
| * @length: length of the data |
| * @data: data, length in @length |
| */ |
| struct iwl_phy_db_cmd { |
| __le16 type; |
| __le16 length; |
| uint8_t data[]; |
| } __packed; |
| |
| /** |
| * struct iwl_cmd_response - generic response struct for most commands |
| * @status: status of the command asked, changes for each one |
| */ |
| struct iwl_cmd_response { |
| __le32 status; |
| }; |
| |
| #endif // SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_CMDHDR_H_ |