src/antlion/controllers/ap_lib/third_party_ap_profiles/asus.py - antlion - Git at Google

 # Copyright 2022 The Fuchsia Authors
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 from antlion import utils

 from antlion.controllers.ap_lib import hostapd_config
 from antlion.controllers.ap_lib import hostapd_constants
 from antlion.controllers.ap_lib import hostapd_utils


 def asus_rtac66u(
     iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
 ):
     # TODO(b/143104825): Permit RIFS once it is supported
     # TODO(b/144446076): Address non-whirlwind hardware capabilities.
     """A simulated implementation of an Asus RTAC66U AP.
     Args:
         iface_wlan_2g: The 2.4Ghz interface of the test AP.
         iface_wlan_5g: The 5Ghz interface of the test AP.
         channel: What channel to use.
         security: A security profile.  Must be none or WPA2 as this is what is
             supported by the RTAC66U.
         ssid: Network name
     Returns:
         A hostapd config
     Differences from real RTAC66U:
         2.4 GHz:
             Rates:
                 RTAC66U:
                     Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
                     Extended: 6, 9, 12, 48
                 Simulated:
                     Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
                     Extended: 24, 36, 48, 54
             HT Capab:
                 Info
                     RTAC66U: Green Field supported
                     Simulated: Green Field not supported on Whirlwind.
         5GHz:
             VHT Capab:
                 RTAC66U:
                     SU Beamformer Supported,
                     SU Beamformee Supported,
                     Beamformee STS Capability: 3,
                     Number of Sounding Dimensions: 3,
                     VHT Link Adaptation: Both
                 Simulated:
                     Above are not supported on Whirlwind.
             VHT Operation Info:
                 RTAC66U: Basic MCS Map (0x0000)
                 Simulated: Basic MCS Map (0xfffc)
             VHT Tx Power Envelope:
                 RTAC66U: Local Max Tx Pwr Constraint: 1.0 dBm
                 Simulated: Local Max Tx Pwr Constraint: 23.0 dBm
         Both:
             HT Capab:
                 A-MPDU
                     RTAC66U: MPDU Density 4
                     Simulated: MPDU Density 8
             HT Info:
                 RTAC66U: RIFS Permitted
                 Simulated: RIFS Prohibited
     """
     # Verify interface and security
     hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
     hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
     hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
     if security:
         hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

     # Common Parameters
     rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
     vht_channel_width = 20
     n_capabilities = [
         hostapd_constants.N_CAPABILITY_LDPC,
         hostapd_constants.N_CAPABILITY_TX_STBC,
         hostapd_constants.N_CAPABILITY_RX_STBC1,
         hostapd_constants.N_CAPABILITY_MAX_AMSDU_7935,
         hostapd_constants.N_CAPABILITY_DSSS_CCK_40,
         hostapd_constants.N_CAPABILITY_SGI20,
     ]
     # WPS IE
     # Broadcom IE
     vendor_elements = {
         "vendor_elements": "dd310050f204104a00011010440001021047001093689729d373c26cb1563c6c570f33"
         "d7103c0001031049000600372a000120"
         "dd090010180200001c0000"
     }

     # 2.4GHz
     if channel <= 11:
         interface = iface_wlan_2g
         rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
         mode = hostapd_constants.MODE_11N_MIXED
         ac_capabilities = None

     # 5GHz
     else:
         interface = iface_wlan_5g
         rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
         mode = hostapd_constants.MODE_11AC_MIXED
         ac_capabilities = [
             hostapd_constants.AC_CAPABILITY_RXLDPC,
             hostapd_constants.AC_CAPABILITY_SHORT_GI_80,
             hostapd_constants.AC_CAPABILITY_TX_STBC_2BY1,
             hostapd_constants.AC_CAPABILITY_RX_STBC_1,
             hostapd_constants.AC_CAPABILITY_MAX_MPDU_11454,
             hostapd_constants.AC_CAPABILITY_MAX_A_MPDU_LEN_EXP7,
         ]

     additional_params = utils.merge_dicts(
         rates, vendor_elements, hostapd_constants.UAPSD_ENABLED
     )

     config = hostapd_config.HostapdConfig(
         ssid=ssid,
         channel=channel,
         hidden=False,
         security=security,
         interface=interface,
         mode=mode,
         force_wmm=True,
         beacon_interval=100,
         dtim_period=3,
         short_preamble=False,
         n_capabilities=n_capabilities,
         ac_capabilities=ac_capabilities,
         vht_channel_width=vht_channel_width,
         additional_parameters=additional_params,
     )

     return config


 def asus_rtac86u(
     iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
 ):
     """A simulated implementation of an Asus RTAC86U AP.
     Args:
         iface_wlan_2g: The 2.4Ghz interface of the test AP.
         iface_wlan_5g: The 5Ghz interface of the test AP.
         channel: What channel to use.
         security: A security profile.  Must be none or WPA2 as this is what is
             supported by the RTAC86U.
         ssid: Network name
     Returns:
         A hostapd config
     Differences from real RTAC86U:
         2.4GHz:
             Rates:
                 RTAC86U:
                     Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
                     Extended: 6, 9, 12, 48
                 Simulated:
                     Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
                     Extended: 24, 36, 48, 54
         5GHz:
             Country Code:
                 Simulated: Has two country code IEs, one that matches
                 the actual, and another explicit IE that was required for
                 hostapd's 802.11d to work.
         Both:
             RSN Capabilities (w/ WPA2):
                 RTAC86U:
                     RSN PTKSA Replay Counter Capab: 16
                 Simulated:
                     RSN PTKSA Replay Counter Capab: 1
     """
     # Verify interface and security
     hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
     hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
     hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
     if security:
         hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

     # Common Parameters
     rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
     qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}

     # 2.4GHz
     if channel <= 11:
         interface = iface_wlan_2g
         mode = hostapd_constants.MODE_11G
         rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
         spectrum_mgmt = False
         # Measurement Pilot Transmission IE
         vendor_elements = {"vendor_elements": "42020000"}

     # 5GHz
     else:
         interface = iface_wlan_5g
         mode = hostapd_constants.MODE_11A
         rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
         spectrum_mgmt = (True,)
         # Country Information IE (w/ individual channel info)
         # TPC Report Transmit Power IE
         # Measurement Pilot Transmission IE
         vendor_elements = {
             "vendor_elements": "074255532024011e28011e2c011e30011e34011e38011e3c011e40011e64011e"
             "68011e6c011e70011e74011e84011e88011e8c011e95011e99011e9d011ea1011e"
             "a5011e"
             "23021300"
             "42020000"
         }

     additional_params = utils.merge_dicts(rates, qbss, vendor_elements)

     config = hostapd_config.HostapdConfig(
         ssid=ssid,
         channel=channel,
         hidden=False,
         security=security,
         interface=interface,
         mode=mode,
         force_wmm=False,
         beacon_interval=100,
         dtim_period=3,
         short_preamble=False,
         spectrum_mgmt_required=spectrum_mgmt,
         additional_parameters=additional_params,
     )
     return config


 def asus_rtac5300(
     iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
 ):
     # TODO(b/143104825): Permit RIFS once it is supported
     # TODO(b/144446076): Address non-whirlwind hardware capabilities.
     """A simulated implementation of an Asus RTAC5300 AP.
     Args:
         iface_wlan_2g: The 2.4Ghz interface of the test AP.
         iface_wlan_5g: The 5Ghz interface of the test AP.
         channel: What channel to use.
         security: A security profile.  Must be none or WPA2 as this is what is
             supported by the RTAC5300.
         ssid: Network name
     Returns:
         A hostapd config
     Differences from real RTAC5300:
         2.4GHz:
             Rates:
                 RTAC86U:
                     Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
                     Extended: 6, 9, 12, 48
                 Simulated:
                     Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
                     Extended: 24, 36, 48, 54
         5GHz:
             VHT Capab:
                 RTAC5300:
                     SU Beamformer Supported,
                     SU Beamformee Supported,
                     Beamformee STS Capability: 4,
                     Number of Sounding Dimensions: 4,
                     MU Beamformer Supported,
                     VHT Link Adaptation: Both
                 Simulated:
                     Above are not supported on Whirlwind.
             VHT Operation Info:
                 RTAC5300: Basic MCS Map (0x0000)
                 Simulated: Basic MCS Map (0xfffc)
             VHT Tx Power Envelope:
                 RTAC5300: Local Max Tx Pwr Constraint: 1.0 dBm
                 Simulated: Local Max Tx Pwr Constraint: 23.0 dBm
         Both:
             HT Capab:
                 A-MPDU
                     RTAC5300: MPDU Density 4
                     Simulated: MPDU Density 8
             HT Info:
                 RTAC5300: RIFS Permitted
                 Simulated: RIFS Prohibited
     """
     # Verify interface and security
     hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
     hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
     hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
     if security:
         hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

     # Common Parameters
     rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
     vht_channel_width = 20
     qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}
     n_capabilities = [
         hostapd_constants.N_CAPABILITY_LDPC,
         hostapd_constants.N_CAPABILITY_TX_STBC,
         hostapd_constants.N_CAPABILITY_RX_STBC1,
         hostapd_constants.N_CAPABILITY_SGI20,
     ]

     # Broadcom IE
     vendor_elements = {"vendor_elements": "dd090010180200009c0000"}

     # 2.4GHz
     if channel <= 11:
         interface = iface_wlan_2g
         rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
         mode = hostapd_constants.MODE_11N_MIXED
         # AsusTek IE
         # Epigram 2.4GHz IE
         vendor_elements["vendor_elements"] += (
             "dd25f832e4010101020100031411b5"
             "2fd437509c30b3d7f5cf5754fb125aed3b8507045aed3b85"
             "dd1e00904c0418bf0cb2798b0faaff0000aaff0000c0050001000000c3020002"
         )
         ac_capabilities = None

     # 5GHz
     else:
         interface = iface_wlan_5g
         rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
         mode = hostapd_constants.MODE_11AC_MIXED
         # Epigram 5GHz IE
         vendor_elements["vendor_elements"] += "dd0500904c0410"
         ac_capabilities = [
             hostapd_constants.AC_CAPABILITY_RXLDPC,
             hostapd_constants.AC_CAPABILITY_SHORT_GI_80,
             hostapd_constants.AC_CAPABILITY_TX_STBC_2BY1,
             hostapd_constants.AC_CAPABILITY_RX_STBC_1,
             hostapd_constants.AC_CAPABILITY_MAX_MPDU_11454,
             hostapd_constants.AC_CAPABILITY_MAX_A_MPDU_LEN_EXP7,
         ]

     additional_params = utils.merge_dicts(
         rates, qbss, vendor_elements, hostapd_constants.UAPSD_ENABLED
     )

     config = hostapd_config.HostapdConfig(
         ssid=ssid,
         channel=channel,
         hidden=False,
         security=security,
         interface=interface,
         mode=mode,
         force_wmm=True,
         beacon_interval=100,
         dtim_period=3,
         short_preamble=False,
         n_capabilities=n_capabilities,
         ac_capabilities=ac_capabilities,
         vht_channel_width=vht_channel_width,
         additional_parameters=additional_params,
     )
     return config


 def asus_rtn56u(
     iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
 ):
     """A simulated implementation of an Asus RTN56U AP.
     Args:
         iface_wlan_2g: The 2.4Ghz interface of the test AP.
         iface_wlan_5g: The 5Ghz interface of the test AP.
         channel: What channel to use.
         security: A security profile.  Must be none or WPA2 as this is what is
             supported by the RTN56U.
         ssid: Network name
     Returns:
         A hostapd config
     Differences from real RTN56U:
         2.4GHz:
             Rates:
                 RTN56U:
                     Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
                     Extended: 6, 9, 12, 48
                 Simulated:
                     Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
                     Extended: 24, 36, 48, 54
         Both:
             Fixed Parameters:
                 RTN56U: APSD Implemented
                 Simulated: APSD Not Implemented
             HT Capab:
                 A-MPDU
                     RTN56U: MPDU Density 4
                     Simulated: MPDU Density 8
             RSN Capabilities (w/ WPA2):
                 RTN56U:
                     RSN PTKSA Replay Counter Capab: 1
                 Simulated:
                     RSN PTKSA Replay Counter Capab: 16
     """
     # Verify interface and security
     hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
     hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
     hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
     if security:
         hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

     # Common Parameters
     rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
     qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}
     n_capabilities = [
         hostapd_constants.N_CAPABILITY_SGI20,
         hostapd_constants.N_CAPABILITY_SGI40,
         hostapd_constants.N_CAPABILITY_TX_STBC,
         hostapd_constants.N_CAPABILITY_RX_STBC1,
     ]

     # 2.4GHz
     if channel <= 11:
         interface = iface_wlan_2g
         rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
         # Ralink Technology IE
         # US Country Code IE
         # AP Channel Report IEs (2)
         # WPS IE
         vendor_elements = {
             "vendor_elements": "dd07000c4307000000"
             "0706555320010b14"
             "33082001020304050607"
             "33082105060708090a0b"
             "dd270050f204104a000110104400010210470010bc329e001dd811b286011c872c"
             "d33448103c000101"
         }

     # 5GHz
     else:
         interface = iface_wlan_5g
         rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
         # Ralink Technology IE
         # US Country Code IE
         vendor_elements = {"vendor_elements": "dd07000c4307000000" "0706555320010b14"}

     additional_params = utils.merge_dicts(
         rates, vendor_elements, qbss, hostapd_constants.UAPSD_ENABLED
     )

     config = hostapd_config.HostapdConfig(
         ssid=ssid,
         channel=channel,
         hidden=False,
         security=security,
         interface=interface,
         mode=hostapd_constants.MODE_11N_MIXED,
         force_wmm=True,
         beacon_interval=100,
         dtim_period=1,
         short_preamble=False,
         n_capabilities=n_capabilities,
         additional_parameters=additional_params,
     )

     return config


 def asus_rtn66u(
     iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
 ):
     # TODO(b/143104825): Permit RIFS once it is supported
     """A simulated implementation of an Asus RTN66U AP.
     Args:
         iface_wlan_2g: The 2.4Ghz interface of the test AP.
         iface_wlan_5g: The 5Ghz interface of the test AP.
         channel: What channel to use.
         security: A security profile.  Must be none or WPA2 as this is what is
             supported by the RTN66U.
         ssid: Network name
     Returns:
         A hostapd config
     Differences from real RTN66U:
         2.4GHz:
             Rates:
                 RTN66U:
                     Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
                     Extended: 6, 9, 12, 48
                 Simulated:
                     Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
                     Extended: 24, 36, 48, 54
         Both:
             HT Info:
                 RTN66U: RIFS Permitted
                 Simulated: RIFS Prohibited
             HT Capab:
                 Info:
                     RTN66U: Green Field supported
                     Simulated: Green Field not supported on Whirlwind.
                 A-MPDU
                     RTN66U: MPDU Density 4
                     Simulated: MPDU Density 8
     """
     # Verify interface and security
     hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
     hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
     hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
     if security:
         hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

     # Common Parameters
     rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
     n_capabilities = [
         hostapd_constants.N_CAPABILITY_LDPC,
         hostapd_constants.N_CAPABILITY_SGI20,
         hostapd_constants.N_CAPABILITY_TX_STBC,
         hostapd_constants.N_CAPABILITY_RX_STBC1,
         hostapd_constants.N_CAPABILITY_MAX_AMSDU_7935,
     ]
     # Broadcom IE
     vendor_elements = {"vendor_elements": "dd090010180200001c0000"}

     # 2.4GHz
     if channel <= 11:
         interface = iface_wlan_2g
         rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
         n_capabilities.append(hostapd_constants.N_CAPABILITY_DSSS_CCK_40)

     # 5GHz
     else:
         interface = iface_wlan_5g
         rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)

     additional_params = utils.merge_dicts(
         rates, vendor_elements, hostapd_constants.UAPSD_ENABLED
     )

     config = hostapd_config.HostapdConfig(
         ssid=ssid,
         channel=channel,
         hidden=False,
         security=security,
         interface=interface,
         mode=hostapd_constants.MODE_11N_MIXED,
         force_wmm=True,
         beacon_interval=100,
         dtim_period=3,
         short_preamble=False,
         n_capabilities=n_capabilities,
         additional_parameters=additional_params,
     )

     return config
	# Copyright 2022 The Fuchsia Authors
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	from antlion import utils

	from antlion.controllers.ap_lib import hostapd_config
	from antlion.controllers.ap_lib import hostapd_constants
	from antlion.controllers.ap_lib import hostapd_utils


	def asus_rtac66u(
	iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
	):
	# TODO(b/143104825): Permit RIFS once it is supported
	# TODO(b/144446076): Address non-whirlwind hardware capabilities.
	"""A simulated implementation of an Asus RTAC66U AP.
	Args:
	iface_wlan_2g: The 2.4Ghz interface of the test AP.
	iface_wlan_5g: The 5Ghz interface of the test AP.
	channel: What channel to use.
	security: A security profile. Must be none or WPA2 as this is what is
	supported by the RTAC66U.
	ssid: Network name
	Returns:
	A hostapd config
	Differences from real RTAC66U:
	2.4 GHz:
	Rates:
	RTAC66U:
	Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
	Extended: 6, 9, 12, 48
	Simulated:
	Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
	Extended: 24, 36, 48, 54
	HT Capab:
	Info
	RTAC66U: Green Field supported
	Simulated: Green Field not supported on Whirlwind.
	5GHz:
	VHT Capab:
	RTAC66U:
	SU Beamformer Supported,
	SU Beamformee Supported,
	Beamformee STS Capability: 3,
	Number of Sounding Dimensions: 3,
	VHT Link Adaptation: Both
	Simulated:
	Above are not supported on Whirlwind.
	VHT Operation Info:
	RTAC66U: Basic MCS Map (0x0000)
	Simulated: Basic MCS Map (0xfffc)
	VHT Tx Power Envelope:
	RTAC66U: Local Max Tx Pwr Constraint: 1.0 dBm
	Simulated: Local Max Tx Pwr Constraint: 23.0 dBm
	Both:
	HT Capab:
	A-MPDU
	RTAC66U: MPDU Density 4
	Simulated: MPDU Density 8
	HT Info:
	RTAC66U: RIFS Permitted
	Simulated: RIFS Prohibited
	"""
	# Verify interface and security
	hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
	hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
	hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
	if security:
	hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

	# Common Parameters
	rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
	vht_channel_width = 20
	n_capabilities = [
	hostapd_constants.N_CAPABILITY_LDPC,
	hostapd_constants.N_CAPABILITY_TX_STBC,
	hostapd_constants.N_CAPABILITY_RX_STBC1,
	hostapd_constants.N_CAPABILITY_MAX_AMSDU_7935,
	hostapd_constants.N_CAPABILITY_DSSS_CCK_40,
	hostapd_constants.N_CAPABILITY_SGI20,
	]
	# WPS IE
	# Broadcom IE
	vendor_elements = {
	"vendor_elements": "dd310050f204104a00011010440001021047001093689729d373c26cb1563c6c570f33"
	"d7103c0001031049000600372a000120"
	"dd090010180200001c0000"
	}

	# 2.4GHz
	if channel <= 11:
	interface = iface_wlan_2g
	rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
	mode = hostapd_constants.MODE_11N_MIXED
	ac_capabilities = None

	# 5GHz
	else:
	interface = iface_wlan_5g
	rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
	mode = hostapd_constants.MODE_11AC_MIXED
	ac_capabilities = [
	hostapd_constants.AC_CAPABILITY_RXLDPC,
	hostapd_constants.AC_CAPABILITY_SHORT_GI_80,
	hostapd_constants.AC_CAPABILITY_TX_STBC_2BY1,
	hostapd_constants.AC_CAPABILITY_RX_STBC_1,
	hostapd_constants.AC_CAPABILITY_MAX_MPDU_11454,
	hostapd_constants.AC_CAPABILITY_MAX_A_MPDU_LEN_EXP7,
	]

	additional_params = utils.merge_dicts(
	rates, vendor_elements, hostapd_constants.UAPSD_ENABLED
	)

	config = hostapd_config.HostapdConfig(
	ssid=ssid,
	channel=channel,
	hidden=False,
	security=security,
	interface=interface,
	mode=mode,
	force_wmm=True,
	beacon_interval=100,
	dtim_period=3,
	short_preamble=False,
	n_capabilities=n_capabilities,
	ac_capabilities=ac_capabilities,
	vht_channel_width=vht_channel_width,
	additional_parameters=additional_params,
	)

	return config


	def asus_rtac86u(
	iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
	):
	"""A simulated implementation of an Asus RTAC86U AP.
	Args:
	iface_wlan_2g: The 2.4Ghz interface of the test AP.
	iface_wlan_5g: The 5Ghz interface of the test AP.
	channel: What channel to use.
	security: A security profile. Must be none or WPA2 as this is what is
	supported by the RTAC86U.
	ssid: Network name
	Returns:
	A hostapd config
	Differences from real RTAC86U:
	2.4GHz:
	Rates:
	RTAC86U:
	Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
	Extended: 6, 9, 12, 48
	Simulated:
	Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
	Extended: 24, 36, 48, 54
	5GHz:
	Country Code:
	Simulated: Has two country code IEs, one that matches
	the actual, and another explicit IE that was required for
	hostapd's 802.11d to work.
	Both:
	RSN Capabilities (w/ WPA2):
	RTAC86U:
	RSN PTKSA Replay Counter Capab: 16
	Simulated:
	RSN PTKSA Replay Counter Capab: 1
	"""
	# Verify interface and security
	hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
	hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
	hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
	if security:
	hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

	# Common Parameters
	rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
	qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}

	# 2.4GHz
	if channel <= 11:
	interface = iface_wlan_2g
	mode = hostapd_constants.MODE_11G
	rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
	spectrum_mgmt = False
	# Measurement Pilot Transmission IE
	vendor_elements = {"vendor_elements": "42020000"}

	# 5GHz
	else:
	interface = iface_wlan_5g
	mode = hostapd_constants.MODE_11A
	rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
	spectrum_mgmt = (True,)
	# Country Information IE (w/ individual channel info)
	# TPC Report Transmit Power IE
	# Measurement Pilot Transmission IE
	vendor_elements = {
	"vendor_elements": "074255532024011e28011e2c011e30011e34011e38011e3c011e40011e64011e"
	"68011e6c011e70011e74011e84011e88011e8c011e95011e99011e9d011ea1011e"
	"a5011e"
	"23021300"
	"42020000"
	}

	additional_params = utils.merge_dicts(rates, qbss, vendor_elements)

	config = hostapd_config.HostapdConfig(
	ssid=ssid,
	channel=channel,
	hidden=False,
	security=security,
	interface=interface,
	mode=mode,
	force_wmm=False,
	beacon_interval=100,
	dtim_period=3,
	short_preamble=False,
	spectrum_mgmt_required=spectrum_mgmt,
	additional_parameters=additional_params,
	)
	return config


	def asus_rtac5300(
	iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
	):
	# TODO(b/143104825): Permit RIFS once it is supported
	# TODO(b/144446076): Address non-whirlwind hardware capabilities.
	"""A simulated implementation of an Asus RTAC5300 AP.
	Args:
	iface_wlan_2g: The 2.4Ghz interface of the test AP.
	iface_wlan_5g: The 5Ghz interface of the test AP.
	channel: What channel to use.
	security: A security profile. Must be none or WPA2 as this is what is
	supported by the RTAC5300.
	ssid: Network name
	Returns:
	A hostapd config
	Differences from real RTAC5300:
	2.4GHz:
	Rates:
	RTAC86U:
	Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
	Extended: 6, 9, 12, 48
	Simulated:
	Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
	Extended: 24, 36, 48, 54
	5GHz:
	VHT Capab:
	RTAC5300:
	SU Beamformer Supported,
	SU Beamformee Supported,
	Beamformee STS Capability: 4,
	Number of Sounding Dimensions: 4,
	MU Beamformer Supported,
	VHT Link Adaptation: Both
	Simulated:
	Above are not supported on Whirlwind.
	VHT Operation Info:
	RTAC5300: Basic MCS Map (0x0000)
	Simulated: Basic MCS Map (0xfffc)
	VHT Tx Power Envelope:
	RTAC5300: Local Max Tx Pwr Constraint: 1.0 dBm
	Simulated: Local Max Tx Pwr Constraint: 23.0 dBm
	Both:
	HT Capab:
	A-MPDU
	RTAC5300: MPDU Density 4
	Simulated: MPDU Density 8
	HT Info:
	RTAC5300: RIFS Permitted
	Simulated: RIFS Prohibited
	"""
	# Verify interface and security
	hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
	hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
	hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
	if security:
	hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

	# Common Parameters
	rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
	vht_channel_width = 20
	qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}
	n_capabilities = [
	hostapd_constants.N_CAPABILITY_LDPC,
	hostapd_constants.N_CAPABILITY_TX_STBC,
	hostapd_constants.N_CAPABILITY_RX_STBC1,
	hostapd_constants.N_CAPABILITY_SGI20,
	]

	# Broadcom IE
	vendor_elements = {"vendor_elements": "dd090010180200009c0000"}

	# 2.4GHz
	if channel <= 11:
	interface = iface_wlan_2g
	rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
	mode = hostapd_constants.MODE_11N_MIXED
	# AsusTek IE
	# Epigram 2.4GHz IE
	vendor_elements["vendor_elements"] += (
	"dd25f832e4010101020100031411b5"
	"2fd437509c30b3d7f5cf5754fb125aed3b8507045aed3b85"
	"dd1e00904c0418bf0cb2798b0faaff0000aaff0000c0050001000000c3020002"
	)
	ac_capabilities = None

	# 5GHz
	else:
	interface = iface_wlan_5g
	rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
	mode = hostapd_constants.MODE_11AC_MIXED
	# Epigram 5GHz IE
	vendor_elements["vendor_elements"] += "dd0500904c0410"
	ac_capabilities = [
	hostapd_constants.AC_CAPABILITY_RXLDPC,
	hostapd_constants.AC_CAPABILITY_SHORT_GI_80,
	hostapd_constants.AC_CAPABILITY_TX_STBC_2BY1,
	hostapd_constants.AC_CAPABILITY_RX_STBC_1,
	hostapd_constants.AC_CAPABILITY_MAX_MPDU_11454,
	hostapd_constants.AC_CAPABILITY_MAX_A_MPDU_LEN_EXP7,
	]

	additional_params = utils.merge_dicts(
	rates, qbss, vendor_elements, hostapd_constants.UAPSD_ENABLED
	)

	config = hostapd_config.HostapdConfig(
	ssid=ssid,
	channel=channel,
	hidden=False,
	security=security,
	interface=interface,
	mode=mode,
	force_wmm=True,
	beacon_interval=100,
	dtim_period=3,
	short_preamble=False,
	n_capabilities=n_capabilities,
	ac_capabilities=ac_capabilities,
	vht_channel_width=vht_channel_width,
	additional_parameters=additional_params,
	)
	return config


	def asus_rtn56u(
	iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
	):
	"""A simulated implementation of an Asus RTN56U AP.
	Args:
	iface_wlan_2g: The 2.4Ghz interface of the test AP.
	iface_wlan_5g: The 5Ghz interface of the test AP.
	channel: What channel to use.
	security: A security profile. Must be none or WPA2 as this is what is
	supported by the RTN56U.
	ssid: Network name
	Returns:
	A hostapd config
	Differences from real RTN56U:
	2.4GHz:
	Rates:
	RTN56U:
	Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
	Extended: 6, 9, 12, 48
	Simulated:
	Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
	Extended: 24, 36, 48, 54
	Both:
	Fixed Parameters:
	RTN56U: APSD Implemented
	Simulated: APSD Not Implemented
	HT Capab:
	A-MPDU
	RTN56U: MPDU Density 4
	Simulated: MPDU Density 8
	RSN Capabilities (w/ WPA2):
	RTN56U:
	RSN PTKSA Replay Counter Capab: 1
	Simulated:
	RSN PTKSA Replay Counter Capab: 16
	"""
	# Verify interface and security
	hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
	hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
	hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
	if security:
	hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

	# Common Parameters
	rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
	qbss = {"bss_load_update_period": 50, "chan_util_avg_period": 600}
	n_capabilities = [
	hostapd_constants.N_CAPABILITY_SGI20,
	hostapd_constants.N_CAPABILITY_SGI40,
	hostapd_constants.N_CAPABILITY_TX_STBC,
	hostapd_constants.N_CAPABILITY_RX_STBC1,
	]

	# 2.4GHz
	if channel <= 11:
	interface = iface_wlan_2g
	rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
	# Ralink Technology IE
	# US Country Code IE
	# AP Channel Report IEs (2)
	# WPS IE
	vendor_elements = {
	"vendor_elements": "dd07000c4307000000"
	"0706555320010b14"
	"33082001020304050607"
	"33082105060708090a0b"
	"dd270050f204104a000110104400010210470010bc329e001dd811b286011c872c"
	"d33448103c000101"
	}

	# 5GHz
	else:
	interface = iface_wlan_5g
	rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)
	# Ralink Technology IE
	# US Country Code IE
	vendor_elements = {"vendor_elements": "dd07000c4307000000" "0706555320010b14"}

	additional_params = utils.merge_dicts(
	rates, vendor_elements, qbss, hostapd_constants.UAPSD_ENABLED
	)

	config = hostapd_config.HostapdConfig(
	ssid=ssid,
	channel=channel,
	hidden=False,
	security=security,
	interface=interface,
	mode=hostapd_constants.MODE_11N_MIXED,
	force_wmm=True,
	beacon_interval=100,
	dtim_period=1,
	short_preamble=False,
	n_capabilities=n_capabilities,
	additional_parameters=additional_params,
	)

	return config


	def asus_rtn66u(
	iface_wlan_2g=None, iface_wlan_5g=None, channel=None, security=None, ssid=None
	):
	# TODO(b/143104825): Permit RIFS once it is supported
	"""A simulated implementation of an Asus RTN66U AP.
	Args:
	iface_wlan_2g: The 2.4Ghz interface of the test AP.
	iface_wlan_5g: The 5Ghz interface of the test AP.
	channel: What channel to use.
	security: A security profile. Must be none or WPA2 as this is what is
	supported by the RTN66U.
	ssid: Network name
	Returns:
	A hostapd config
	Differences from real RTN66U:
	2.4GHz:
	Rates:
	RTN66U:
	Supported: 1, 2, 5.5, 11, 18, 24, 36, 54
	Extended: 6, 9, 12, 48
	Simulated:
	Supported: 1, 2, 5.5, 11, 6, 9, 12, 18
	Extended: 24, 36, 48, 54
	Both:
	HT Info:
	RTN66U: RIFS Permitted
	Simulated: RIFS Prohibited
	HT Capab:
	Info:
	RTN66U: Green Field supported
	Simulated: Green Field not supported on Whirlwind.
	A-MPDU
	RTN66U: MPDU Density 4
	Simulated: MPDU Density 8
	"""
	# Verify interface and security
	hostapd_utils.verify_interface(iface_wlan_2g, hostapd_constants.INTERFACE_2G_LIST)
	hostapd_utils.verify_interface(iface_wlan_5g, hostapd_constants.INTERFACE_5G_LIST)
	hostapd_utils.verify_security_mode(security, [None, hostapd_constants.WPA2])
	if security:
	hostapd_utils.verify_cipher(security, [hostapd_constants.WPA2_DEFAULT_CIPER])

	# Common Parameters
	rates = hostapd_constants.CCK_AND_OFDM_DATA_RATES
	n_capabilities = [
	hostapd_constants.N_CAPABILITY_LDPC,
	hostapd_constants.N_CAPABILITY_SGI20,
	hostapd_constants.N_CAPABILITY_TX_STBC,
	hostapd_constants.N_CAPABILITY_RX_STBC1,
	hostapd_constants.N_CAPABILITY_MAX_AMSDU_7935,
	]
	# Broadcom IE
	vendor_elements = {"vendor_elements": "dd090010180200001c0000"}

	# 2.4GHz
	if channel <= 11:
	interface = iface_wlan_2g
	rates.update(hostapd_constants.CCK_AND_OFDM_BASIC_RATES)
	n_capabilities.append(hostapd_constants.N_CAPABILITY_DSSS_CCK_40)

	# 5GHz
	else:
	interface = iface_wlan_5g
	rates.update(hostapd_constants.OFDM_ONLY_BASIC_RATES)

	additional_params = utils.merge_dicts(
	rates, vendor_elements, hostapd_constants.UAPSD_ENABLED
	)

	config = hostapd_config.HostapdConfig(
	ssid=ssid,
	channel=channel,
	hidden=False,
	security=security,
	interface=interface,
	mode=hostapd_constants.MODE_11N_MIXED,
	force_wmm=True,
	beacon_interval=100,
	dtim_period=3,
	short_preamble=False,
	n_capabilities=n_capabilities,
	additional_parameters=additional_params,
	)

	return config