blob: c2ff74d4b6cab5df56c2bced61cc71b3a6a450a2 [file] [log] [blame]
/*
* Cortex-A9MPCore internal peripheral emulation.
*
* Copyright (c) 2009 CodeSourcery.
* Copyright (c) 2011 Linaro Limited.
* Written by Paul Brook, Peter Maydell.
*
* This code is licensed under the GPL.
*/
#include "sysbus.h"
/* A9MP private memory region. */
typedef struct a9mp_priv_state {
SysBusDevice busdev;
uint32_t scu_control;
uint32_t scu_status;
uint32_t old_timer_status[8];
uint32_t num_cpu;
MemoryRegion scu_iomem;
MemoryRegion ptimer_iomem;
MemoryRegion container;
DeviceState *mptimer;
DeviceState *gic;
uint32_t num_irq;
} a9mp_priv_state;
static uint64_t a9_scu_read(void *opaque, target_phys_addr_t offset,
unsigned size)
{
a9mp_priv_state *s = (a9mp_priv_state *)opaque;
switch (offset) {
case 0x00: /* Control */
return s->scu_control;
case 0x04: /* Configuration */
return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
case 0x08: /* CPU Power Status */
return s->scu_status;
case 0x09: /* CPU status. */
return s->scu_status >> 8;
case 0x0a: /* CPU status. */
return s->scu_status >> 16;
case 0x0b: /* CPU status. */
return s->scu_status >> 24;
case 0x0c: /* Invalidate All Registers In Secure State */
return 0;
case 0x40: /* Filtering Start Address Register */
case 0x44: /* Filtering End Address Register */
/* RAZ/WI, like an implementation with only one AXI master */
return 0;
case 0x50: /* SCU Access Control Register */
case 0x54: /* SCU Non-secure Access Control Register */
/* unimplemented, fall through */
default:
return 0;
}
}
static void a9_scu_write(void *opaque, target_phys_addr_t offset,
uint64_t value, unsigned size)
{
a9mp_priv_state *s = (a9mp_priv_state *)opaque;
uint32_t mask;
uint32_t shift;
switch (size) {
case 1:
mask = 0xff;
break;
case 2:
mask = 0xffff;
break;
case 4:
mask = 0xffffffff;
break;
default:
fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
size, offset);
return;
}
switch (offset) {
case 0x00: /* Control */
s->scu_control = value & 1;
break;
case 0x4: /* Configuration: RO */
break;
case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */
shift = (offset - 0x8) * 8;
s->scu_status &= ~(mask << shift);
s->scu_status |= ((value & mask) << shift);
break;
case 0x0c: /* Invalidate All Registers In Secure State */
/* no-op as we do not implement caches */
break;
case 0x40: /* Filtering Start Address Register */
case 0x44: /* Filtering End Address Register */
/* RAZ/WI, like an implementation with only one AXI master */
break;
case 0x50: /* SCU Access Control Register */
case 0x54: /* SCU Non-secure Access Control Register */
/* unimplemented, fall through */
default:
break;
}
}
static const MemoryRegionOps a9_scu_ops = {
.read = a9_scu_read,
.write = a9_scu_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void a9mp_priv_reset(DeviceState *dev)
{
a9mp_priv_state *s = FROM_SYSBUS(a9mp_priv_state, sysbus_from_qdev(dev));
int i;
s->scu_control = 0;
for (i = 0; i < ARRAY_SIZE(s->old_timer_status); i++) {
s->old_timer_status[i] = 0;
}
}
static void a9mp_priv_set_irq(void *opaque, int irq, int level)
{
a9mp_priv_state *s = (a9mp_priv_state *)opaque;
qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);
}
static int a9mp_priv_init(SysBusDevice *dev)
{
a9mp_priv_state *s = FROM_SYSBUS(a9mp_priv_state, dev);
SysBusDevice *busdev, *gicbusdev;
int i;
s->gic = qdev_create(NULL, "arm_gic");
qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
qdev_init_nofail(s->gic);
gicbusdev = sysbus_from_qdev(s->gic);
/* Pass through outbound IRQ lines from the GIC */
sysbus_pass_irq(dev, gicbusdev);
/* Pass through inbound GPIO lines to the GIC */
qdev_init_gpio_in(&s->busdev.qdev, a9mp_priv_set_irq, s->num_irq - 32);
s->mptimer = qdev_create(NULL, "arm_mptimer");
qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
qdev_init_nofail(s->mptimer);
busdev = sysbus_from_qdev(s->mptimer);
/* Memory map (addresses are offsets from PERIPHBASE):
* 0x0000-0x00ff -- Snoop Control Unit
* 0x0100-0x01ff -- GIC CPU interface
* 0x0200-0x02ff -- Global Timer
* 0x0300-0x05ff -- nothing
* 0x0600-0x06ff -- private timers and watchdogs
* 0x0700-0x0fff -- nothing
* 0x1000-0x1fff -- GIC Distributor
*
* We should implement the global timer but don't currently do so.
*/
memory_region_init(&s->container, "a9mp-priv-container", 0x2000);
memory_region_init_io(&s->scu_iomem, &a9_scu_ops, s, "a9mp-scu", 0x100);
memory_region_add_subregion(&s->container, 0, &s->scu_iomem);
/* GIC CPU interface */
memory_region_add_subregion(&s->container, 0x100,
sysbus_mmio_get_region(gicbusdev, 1));
/* Note that the A9 exposes only the "timer/watchdog for this core"
* memory region, not the "timer/watchdog for core X" ones 11MPcore has.
*/
memory_region_add_subregion(&s->container, 0x600,
sysbus_mmio_get_region(busdev, 0));
memory_region_add_subregion(&s->container, 0x620,
sysbus_mmio_get_region(busdev, 1));
memory_region_add_subregion(&s->container, 0x1000,
sysbus_mmio_get_region(gicbusdev, 0));
sysbus_init_mmio(dev, &s->container);
/* Wire up the interrupt from each watchdog and timer.
* For each core the timer is PPI 29 and the watchdog PPI 30.
*/
for (i = 0; i < s->num_cpu; i++) {
int ppibase = (s->num_irq - 32) + i * 32;
sysbus_connect_irq(busdev, i * 2,
qdev_get_gpio_in(s->gic, ppibase + 29));
sysbus_connect_irq(busdev, i * 2 + 1,
qdev_get_gpio_in(s->gic, ppibase + 30));
}
return 0;
}
static const VMStateDescription vmstate_a9mp_priv = {
.name = "a9mpcore_priv",
.version_id = 2,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(scu_control, a9mp_priv_state),
VMSTATE_UINT32_ARRAY(old_timer_status, a9mp_priv_state, 8),
VMSTATE_UINT32_V(scu_status, a9mp_priv_state, 2),
VMSTATE_END_OF_LIST()
}
};
static Property a9mp_priv_properties[] = {
DEFINE_PROP_UINT32("num-cpu", a9mp_priv_state, num_cpu, 1),
/* The Cortex-A9MP may have anything from 0 to 224 external interrupt
* IRQ lines (with another 32 internal). We default to 64+32, which
* is the number provided by the Cortex-A9MP test chip in the
* Realview PBX-A9 and Versatile Express A9 development boards.
* Other boards may differ and should set this property appropriately.
*/
DEFINE_PROP_UINT32("num-irq", a9mp_priv_state, num_irq, 96),
DEFINE_PROP_END_OF_LIST(),
};
static void a9mp_priv_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = a9mp_priv_init;
dc->props = a9mp_priv_properties;
dc->vmsd = &vmstate_a9mp_priv;
dc->reset = a9mp_priv_reset;
}
static TypeInfo a9mp_priv_info = {
.name = "a9mpcore_priv",
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(a9mp_priv_state),
.class_init = a9mp_priv_class_init,
};
static void a9mp_register_types(void)
{
type_register_static(&a9mp_priv_info);
}
type_init(a9mp_register_types)