hw/serial.c - third_party/qemu - Git at Google

 /*
  * QEMU 16450 UART emulation
  *
  * Copyright (c) 2003-2004 Fabrice Bellard
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
  * in the Software without restriction, including without limitation the rights
  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  * copies of the Software, and to permit persons to whom the Software is
  * furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in
  * all copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */
 #include "vl.h"

 //#define DEBUG_SERIAL

 #define UART_LCR_DLAB	0x80	/* Divisor latch access bit */

 #define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
 #define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
 #define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
 #define UART_IER_RDI	0x01	/* Enable receiver data interrupt */

 #define UART_IIR_NO_INT	0x01	/* No interrupts pending */
 #define UART_IIR_ID	0x06	/* Mask for the interrupt ID */

 #define UART_IIR_MSI	0x00	/* Modem status interrupt */
 #define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
 #define UART_IIR_RDI	0x04	/* Receiver data interrupt */
 #define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */

 /*
  * These are the definitions for the Modem Control Register
  */
 #define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
 #define UART_MCR_OUT2	0x08	/* Out2 complement */
 #define UART_MCR_OUT1	0x04	/* Out1 complement */
 #define UART_MCR_RTS	0x02	/* RTS complement */
 #define UART_MCR_DTR	0x01	/* DTR complement */

 /*
  * These are the definitions for the Modem Status Register
  */
 #define UART_MSR_DCD	0x80	/* Data Carrier Detect */
 #define UART_MSR_RI	0x40	/* Ring Indicator */
 #define UART_MSR_DSR	0x20	/* Data Set Ready */
 #define UART_MSR_CTS	0x10	/* Clear to Send */
 #define UART_MSR_DDCD	0x08	/* Delta DCD */
 #define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
 #define UART_MSR_DDSR	0x02	/* Delta DSR */
 #define UART_MSR_DCTS	0x01	/* Delta CTS */
 #define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */

 #define UART_LSR_TEMT	0x40	/* Transmitter empty */
 #define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
 #define UART_LSR_BI	0x10	/* Break interrupt indicator */
 #define UART_LSR_FE	0x08	/* Frame error indicator */
 #define UART_LSR_PE	0x04	/* Parity error indicator */
 #define UART_LSR_OE	0x02	/* Overrun error indicator */
 #define UART_LSR_DR	0x01	/* Receiver data ready */

 struct SerialState {
     uint16_t divider;
     uint8_t rbr; /* receive register */
     uint8_t ier;
     uint8_t iir; /* read only */
     uint8_t lcr;
     uint8_t mcr;
     uint8_t lsr; /* read only */
     uint8_t msr; /* read only */
     uint8_t scr;
     /* NOTE: this hidden state is necessary for tx irq generation as
        it can be reset while reading iir */
     int thr_ipending;
     SetIRQFunc *set_irq;
     void *irq_opaque;
     int irq;
     CharDriverState *chr;
     int last_break_enable;
     target_ulong base;
     int it_shift;
 };

 static void serial_update_irq(SerialState *s)
 {
     if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) {
         s->iir = UART_IIR_RDI;
     } else if (s->thr_ipending && (s->ier & UART_IER_THRI)) {
         s->iir = UART_IIR_THRI;
     } else {
         s->iir = UART_IIR_NO_INT;
     }
     if (s->iir != UART_IIR_NO_INT) {
         s->set_irq(s->irq_opaque, s->irq, 1);
     } else {
         s->set_irq(s->irq_opaque, s->irq, 0);
     }
 }

 static void serial_update_parameters(SerialState *s)
 {
     int speed, parity, data_bits, stop_bits;
     QEMUSerialSetParams ssp;

     if (s->lcr & 0x08) {
         if (s->lcr & 0x10)
             parity = 'E';
         else
             parity = 'O';
     } else {
             parity = 'N';
     }
     if (s->lcr & 0x04)
         stop_bits = 2;
     else
         stop_bits = 1;
     data_bits = (s->lcr & 0x03) + 5;
     if (s->divider == 0)
         return;
     speed = 115200 / s->divider;
     ssp.speed = speed;
     ssp.parity = parity;
     ssp.data_bits = data_bits;
     ssp.stop_bits = stop_bits;
     qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 #if 0
     printf("speed=%d parity=%c data=%d stop=%d\n",
            speed, parity, data_bits, stop_bits);
 #endif
 }

 static void serial_ioport_write(void *opaque, uint32_t addr, uint32_t val)
 {
     SerialState *s = opaque;
     unsigned char ch;

     addr &= 7;
 #ifdef DEBUG_SERIAL
     printf("serial: write addr=0x%02x val=0x%02x\n", addr, val);
 #endif
     switch(addr) {
     default:
     case 0:
         if (s->lcr & UART_LCR_DLAB) {
             s->divider = (s->divider & 0xff00) | val;
             serial_update_parameters(s);
         } else {
             s->thr_ipending = 0;
             s->lsr &= ~UART_LSR_THRE;
             serial_update_irq(s);
             ch = val;
             qemu_chr_write(s->chr, &ch, 1);
             s->thr_ipending = 1;
             s->lsr |= UART_LSR_THRE;
             s->lsr |= UART_LSR_TEMT;
             serial_update_irq(s);
         }
         break;
     case 1:
         if (s->lcr & UART_LCR_DLAB) {
             s->divider = (s->divider & 0x00ff) | (val << 8);
             serial_update_parameters(s);
         } else {
             s->ier = val & 0x0f;
             if (s->lsr & UART_LSR_THRE) {
                 s->thr_ipending = 1;
             }
             serial_update_irq(s);
         }
         break;
     case 2:
         break;
     case 3:
         {
             int break_enable;
             s->lcr = val;
             serial_update_parameters(s);
             break_enable = (val >> 6) & 1;
             if (break_enable != s->last_break_enable) {
                 s->last_break_enable = break_enable;
                 qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
                                &break_enable);
             }
         }
         break;
     case 4:
         s->mcr = val & 0x1f;
         break;
     case 5:
         break;
     case 6:
         break;
     case 7:
         s->scr = val;
         break;
     }
 }

 static uint32_t serial_ioport_read(void *opaque, uint32_t addr)
 {
     SerialState *s = opaque;
     uint32_t ret;

     addr &= 7;
     switch(addr) {
     default:
     case 0:
         if (s->lcr & UART_LCR_DLAB) {
             ret = s->divider & 0xff;
         } else {
             ret = s->rbr;
             s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
             serial_update_irq(s);
         }
         break;
     case 1:
         if (s->lcr & UART_LCR_DLAB) {
             ret = (s->divider >> 8) & 0xff;
         } else {
             ret = s->ier;
         }
         break;
     case 2:
         ret = s->iir;
         /* reset THR pending bit */
         if ((ret & 0x7) == UART_IIR_THRI)
             s->thr_ipending = 0;
         serial_update_irq(s);
         break;
     case 3:
         ret = s->lcr;
         break;
     case 4:
         ret = s->mcr;
         break;
     case 5:
         ret = s->lsr;
         break;
     case 6:
         if (s->mcr & UART_MCR_LOOP) {
             /* in loopback, the modem output pins are connected to the
                inputs */
             ret = (s->mcr & 0x0c) << 4;
             ret |= (s->mcr & 0x02) << 3;
             ret |= (s->mcr & 0x01) << 5;
         } else {
             ret = s->msr;
         }
         break;
     case 7:
         ret = s->scr;
         break;
     }
 #ifdef DEBUG_SERIAL
     printf("serial: read addr=0x%02x val=0x%02x\n", addr, ret);
 #endif
     return ret;
 }

 static int serial_can_receive(SerialState *s)
 {
     return !(s->lsr & UART_LSR_DR);
 }

 static void serial_receive_byte(SerialState *s, int ch)
 {
     s->rbr = ch;
     s->lsr |= UART_LSR_DR;
     serial_update_irq(s);
 }

 static void serial_receive_break(SerialState *s)
 {
     s->rbr = 0;
     s->lsr |= UART_LSR_BI | UART_LSR_DR;
     serial_update_irq(s);
 }

 static int serial_can_receive1(void *opaque)
 {
     SerialState *s = opaque;
     return serial_can_receive(s);
 }

 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 {
     SerialState *s = opaque;
     serial_receive_byte(s, buf[0]);
 }

 static void serial_event(void *opaque, int event)
 {
     SerialState *s = opaque;
     if (event == CHR_EVENT_BREAK)
         serial_receive_break(s);
 }

 static void serial_save(QEMUFile *f, void *opaque)
 {
     SerialState *s = opaque;

     qemu_put_be16s(f,&s->divider);
     qemu_put_8s(f,&s->rbr);
     qemu_put_8s(f,&s->ier);
     qemu_put_8s(f,&s->iir);
     qemu_put_8s(f,&s->lcr);
     qemu_put_8s(f,&s->mcr);
     qemu_put_8s(f,&s->lsr);
     qemu_put_8s(f,&s->msr);
     qemu_put_8s(f,&s->scr);
 }

 static int serial_load(QEMUFile *f, void *opaque, int version_id)
 {
     SerialState *s = opaque;

     if(version_id > 2)
         return -EINVAL;

     if (version_id >= 2)
         qemu_get_be16s(f, &s->divider);
     else
         s->divider = qemu_get_byte(f);
     qemu_get_8s(f,&s->rbr);
     qemu_get_8s(f,&s->ier);
     qemu_get_8s(f,&s->iir);
     qemu_get_8s(f,&s->lcr);
     qemu_get_8s(f,&s->mcr);
     qemu_get_8s(f,&s->lsr);
     qemu_get_8s(f,&s->msr);
     qemu_get_8s(f,&s->scr);

     return 0;
 }

 /* If fd is zero, it means that the serial device uses the console */
 SerialState *serial_init(SetIRQFunc *set_irq, void *opaque,
                          int base, int irq, CharDriverState *chr)
 {
     SerialState *s;

     s = qemu_mallocz(sizeof(SerialState));
     if (!s)
         return NULL;
     s->set_irq = set_irq;
     s->irq_opaque = opaque;
     s->irq = irq;
     s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
     s->iir = UART_IIR_NO_INT;
     s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;

     register_savevm("serial", base, 2, serial_save, serial_load, s);

     register_ioport_write(base, 8, 1, serial_ioport_write, s);
     register_ioport_read(base, 8, 1, serial_ioport_read, s);
     s->chr = chr;
     qemu_chr_add_handlers(chr, serial_can_receive1, serial_receive1,
                           serial_event, s);
     return s;
 }

 /* Memory mapped interface */
 static uint32_t serial_mm_readb (void *opaque, target_phys_addr_t addr)
 {
     SerialState *s = opaque;

     return serial_ioport_read(s, (addr - s->base) >> s->it_shift) & 0xFF;
 }

 static void serial_mm_writeb (void *opaque,
                               target_phys_addr_t addr, uint32_t value)
 {
     SerialState *s = opaque;

     serial_ioport_write(s, (addr - s->base) >> s->it_shift, value & 0xFF);
 }

 static uint32_t serial_mm_readw (void *opaque, target_phys_addr_t addr)
 {
     SerialState *s = opaque;

     return serial_ioport_read(s, (addr - s->base) >> s->it_shift) & 0xFFFF;
 }

 static void serial_mm_writew (void *opaque,
                               target_phys_addr_t addr, uint32_t value)
 {
     SerialState *s = opaque;

     serial_ioport_write(s, (addr - s->base) >> s->it_shift, value & 0xFFFF);
 }

 static uint32_t serial_mm_readl (void *opaque, target_phys_addr_t addr)
 {
     SerialState *s = opaque;

     return serial_ioport_read(s, (addr - s->base) >> s->it_shift);
 }

 static void serial_mm_writel (void *opaque,
                               target_phys_addr_t addr, uint32_t value)
 {
     SerialState *s = opaque;

     serial_ioport_write(s, (addr - s->base) >> s->it_shift, value);
 }

 static CPUReadMemoryFunc *serial_mm_read[] = {
     &serial_mm_readb,
     &serial_mm_readw,
     &serial_mm_readl,
 };

 static CPUWriteMemoryFunc *serial_mm_write[] = {
     &serial_mm_writeb,
     &serial_mm_writew,
     &serial_mm_writel,
 };

 SerialState *serial_mm_init (SetIRQFunc *set_irq, void *opaque,
                              target_ulong base, int it_shift,
                              int irq, CharDriverState *chr)
 {
     SerialState *s;
     int s_io_memory;

     s = qemu_mallocz(sizeof(SerialState));
     if (!s)
         return NULL;
     s->set_irq = set_irq;
     s->irq_opaque = opaque;
     s->irq = irq;
     s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
     s->iir = UART_IIR_NO_INT;
     s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;
     s->base = base;
     s->it_shift = it_shift;

     register_savevm("serial", base, 2, serial_save, serial_load, s);

     s_io_memory = cpu_register_io_memory(0, serial_mm_read,
                                          serial_mm_write, s);
     cpu_register_physical_memory(base, 8 << it_shift, s_io_memory);
     s->chr = chr;
     qemu_chr_add_handlers(chr, serial_can_receive1, serial_receive1,
                           serial_event, s);
     return s;
 }
	/*
	* QEMU 16450 UART emulation
	*
	* Copyright (c) 2003-2004 Fabrice Bellard
	*
	* Permission is hereby granted, free of charge, to any person obtaining a copy
	* of this software and associated documentation files (the "Software"), to deal
	* in the Software without restriction, including without limitation the rights
	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
	* copies of the Software, and to permit persons to whom the Software is
	* furnished to do so, subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in
	* all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
	* THE SOFTWARE.
	*/
	#include "vl.h"

	//#define DEBUG_SERIAL

	#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */

	#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
	#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
	#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
	#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */

	#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
	#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */

	#define UART_IIR_MSI 0x00 /* Modem status interrupt */
	#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
	#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
	#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */

	/*
	* These are the definitions for the Modem Control Register
	*/
	#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
	#define UART_MCR_OUT2 0x08 /* Out2 complement */
	#define UART_MCR_OUT1 0x04 /* Out1 complement */
	#define UART_MCR_RTS 0x02 /* RTS complement */
	#define UART_MCR_DTR 0x01 /* DTR complement */

	/*
	* These are the definitions for the Modem Status Register
	*/
	#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
	#define UART_MSR_RI 0x40 /* Ring Indicator */
	#define UART_MSR_DSR 0x20 /* Data Set Ready */
	#define UART_MSR_CTS 0x10 /* Clear to Send */
	#define UART_MSR_DDCD 0x08 /* Delta DCD */
	#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
	#define UART_MSR_DDSR 0x02 /* Delta DSR */
	#define UART_MSR_DCTS 0x01 /* Delta CTS */
	#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */

	#define UART_LSR_TEMT 0x40 /* Transmitter empty */
	#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
	#define UART_LSR_BI 0x10 /* Break interrupt indicator */
	#define UART_LSR_FE 0x08 /* Frame error indicator */
	#define UART_LSR_PE 0x04 /* Parity error indicator */
	#define UART_LSR_OE 0x02 /* Overrun error indicator */
	#define UART_LSR_DR 0x01 /* Receiver data ready */

	struct SerialState {
	uint16_t divider;
	uint8_t rbr; /* receive register */
	uint8_t ier;
	uint8_t iir; /* read only */
	uint8_t lcr;
	uint8_t mcr;
	uint8_t lsr; /* read only */
	uint8_t msr; /* read only */
	uint8_t scr;
	/* NOTE: this hidden state is necessary for tx irq generation as
	it can be reset while reading iir */
	int thr_ipending;
	SetIRQFunc *set_irq;
	void *irq_opaque;
	int irq;
	CharDriverState *chr;
	int last_break_enable;
	target_ulong base;
	int it_shift;
	};

	static void serial_update_irq(SerialState *s)
	{
	if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) {
	s->iir = UART_IIR_RDI;
	} else if (s->thr_ipending && (s->ier & UART_IER_THRI)) {
	s->iir = UART_IIR_THRI;
	} else {
	s->iir = UART_IIR_NO_INT;
	}
	if (s->iir != UART_IIR_NO_INT) {
	s->set_irq(s->irq_opaque, s->irq, 1);
	} else {
	s->set_irq(s->irq_opaque, s->irq, 0);
	}
	}

	static void serial_update_parameters(SerialState *s)
	{
	int speed, parity, data_bits, stop_bits;
	QEMUSerialSetParams ssp;

	if (s->lcr & 0x08) {
	if (s->lcr & 0x10)
	parity = 'E';
	else
	parity = 'O';
	} else {
	parity = 'N';
	}
	if (s->lcr & 0x04)
	stop_bits = 2;
	else
	stop_bits = 1;
	data_bits = (s->lcr & 0x03) + 5;
	if (s->divider == 0)
	return;
	speed = 115200 / s->divider;
	ssp.speed = speed;
	ssp.parity = parity;
	ssp.data_bits = data_bits;
	ssp.stop_bits = stop_bits;
	qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
	#if 0
	printf("speed=%d parity=%c data=%d stop=%d\n",
	speed, parity, data_bits, stop_bits);
	#endif
	}

	static void serial_ioport_write(void *opaque, uint32_t addr, uint32_t val)
	{
	SerialState *s = opaque;
	unsigned char ch;

	addr &= 7;
	#ifdef DEBUG_SERIAL
	printf("serial: write addr=0x%02x val=0x%02x\n", addr, val);
	#endif
	switch(addr) {
	default:
	case 0:
	if (s->lcr & UART_LCR_DLAB) {
	s->divider = (s->divider & 0xff00) \| val;
	serial_update_parameters(s);
	} else {
	s->thr_ipending = 0;
	s->lsr &= ~UART_LSR_THRE;
	serial_update_irq(s);
	ch = val;
	qemu_chr_write(s->chr, &ch, 1);
	s->thr_ipending = 1;
	s->lsr \|= UART_LSR_THRE;
	s->lsr \|= UART_LSR_TEMT;
	serial_update_irq(s);
	}
	break;
	case 1:
	if (s->lcr & UART_LCR_DLAB) {
	s->divider = (s->divider & 0x00ff) \| (val << 8);
	serial_update_parameters(s);
	} else {
	s->ier = val & 0x0f;
	if (s->lsr & UART_LSR_THRE) {
	s->thr_ipending = 1;
	}
	serial_update_irq(s);
	}
	break;
	case 2:
	break;
	case 3:
	{
	int break_enable;
	s->lcr = val;
	serial_update_parameters(s);
	break_enable = (val >> 6) & 1;
	if (break_enable != s->last_break_enable) {
	s->last_break_enable = break_enable;
	qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
	&break_enable);
	}
	}
	break;
	case 4:
	s->mcr = val & 0x1f;
	break;
	case 5:
	break;
	case 6:
	break;
	case 7:
	s->scr = val;
	break;
	}
	}

	static uint32_t serial_ioport_read(void *opaque, uint32_t addr)
	{
	SerialState *s = opaque;
	uint32_t ret;

	addr &= 7;
	switch(addr) {
	default:
	case 0:
	if (s->lcr & UART_LCR_DLAB) {
	ret = s->divider & 0xff;
	} else {
	ret = s->rbr;
	s->lsr &= ~(UART_LSR_DR \| UART_LSR_BI);
	serial_update_irq(s);
	}
	break;
	case 1:
	if (s->lcr & UART_LCR_DLAB) {
	ret = (s->divider >> 8) & 0xff;
	} else {
	ret = s->ier;
	}
	break;
	case 2:
	ret = s->iir;
	/* reset THR pending bit */
	if ((ret & 0x7) == UART_IIR_THRI)
	s->thr_ipending = 0;
	serial_update_irq(s);
	break;
	case 3:
	ret = s->lcr;
	break;
	case 4:
	ret = s->mcr;
	break;
	case 5:
	ret = s->lsr;
	break;
	case 6:
	if (s->mcr & UART_MCR_LOOP) {
	/* in loopback, the modem output pins are connected to the
	inputs */
	ret = (s->mcr & 0x0c) << 4;
	ret \|= (s->mcr & 0x02) << 3;
	ret \|= (s->mcr & 0x01) << 5;
	} else {
	ret = s->msr;
	}
	break;
	case 7:
	ret = s->scr;
	break;
	}
	#ifdef DEBUG_SERIAL
	printf("serial: read addr=0x%02x val=0x%02x\n", addr, ret);
	#endif
	return ret;
	}

	static int serial_can_receive(SerialState *s)
	{
	return !(s->lsr & UART_LSR_DR);
	}

	static void serial_receive_byte(SerialState *s, int ch)
	{
	s->rbr = ch;
	s->lsr \|= UART_LSR_DR;
	serial_update_irq(s);
	}

	static void serial_receive_break(SerialState *s)
	{
	s->rbr = 0;
	s->lsr \|= UART_LSR_BI \| UART_LSR_DR;
	serial_update_irq(s);
	}

	static int serial_can_receive1(void *opaque)
	{
	SerialState *s = opaque;
	return serial_can_receive(s);
	}

	static void serial_receive1(void opaque, const uint8_t buf, int size)
	{
	SerialState *s = opaque;
	serial_receive_byte(s, buf[0]);
	}

	static void serial_event(void *opaque, int event)
	{
	SerialState *s = opaque;
	if (event == CHR_EVENT_BREAK)
	serial_receive_break(s);
	}

	static void serial_save(QEMUFile f, void opaque)
	{
	SerialState *s = opaque;

	qemu_put_be16s(f,&s->divider);
	qemu_put_8s(f,&s->rbr);
	qemu_put_8s(f,&s->ier);
	qemu_put_8s(f,&s->iir);
	qemu_put_8s(f,&s->lcr);
	qemu_put_8s(f,&s->mcr);
	qemu_put_8s(f,&s->lsr);
	qemu_put_8s(f,&s->msr);
	qemu_put_8s(f,&s->scr);
	}

	static int serial_load(QEMUFile f, void opaque, int version_id)
	{
	SerialState *s = opaque;

	if(version_id > 2)
	return -EINVAL;

	if (version_id >= 2)
	qemu_get_be16s(f, &s->divider);
	else
	s->divider = qemu_get_byte(f);
	qemu_get_8s(f,&s->rbr);
	qemu_get_8s(f,&s->ier);
	qemu_get_8s(f,&s->iir);
	qemu_get_8s(f,&s->lcr);
	qemu_get_8s(f,&s->mcr);
	qemu_get_8s(f,&s->lsr);
	qemu_get_8s(f,&s->msr);
	qemu_get_8s(f,&s->scr);

	return 0;
	}

	/* If fd is zero, it means that the serial device uses the console */
	SerialState serial_init(SetIRQFunc set_irq, void *opaque,
	int base, int irq, CharDriverState *chr)
	{
	SerialState *s;

	s = qemu_mallocz(sizeof(SerialState));
	if (!s)
	return NULL;
	s->set_irq = set_irq;
	s->irq_opaque = opaque;
	s->irq = irq;
	s->lsr = UART_LSR_TEMT \| UART_LSR_THRE;
	s->iir = UART_IIR_NO_INT;
	s->msr = UART_MSR_DCD \| UART_MSR_DSR \| UART_MSR_CTS;

	register_savevm("serial", base, 2, serial_save, serial_load, s);

	register_ioport_write(base, 8, 1, serial_ioport_write, s);
	register_ioport_read(base, 8, 1, serial_ioport_read, s);
	s->chr = chr;
	qemu_chr_add_handlers(chr, serial_can_receive1, serial_receive1,
	serial_event, s);
	return s;
	}

	/* Memory mapped interface */
	static uint32_t serial_mm_readb (void *opaque, target_phys_addr_t addr)
	{
	SerialState *s = opaque;

	return serial_ioport_read(s, (addr - s->base) >> s->it_shift) & 0xFF;
	}

	static void serial_mm_writeb (void *opaque,
	target_phys_addr_t addr, uint32_t value)
	{
	SerialState *s = opaque;

	serial_ioport_write(s, (addr - s->base) >> s->it_shift, value & 0xFF);
	}

	static uint32_t serial_mm_readw (void *opaque, target_phys_addr_t addr)
	{
	SerialState *s = opaque;

	return serial_ioport_read(s, (addr - s->base) >> s->it_shift) & 0xFFFF;
	}

	static void serial_mm_writew (void *opaque,
	target_phys_addr_t addr, uint32_t value)
	{
	SerialState *s = opaque;

	serial_ioport_write(s, (addr - s->base) >> s->it_shift, value & 0xFFFF);
	}

	static uint32_t serial_mm_readl (void *opaque, target_phys_addr_t addr)
	{
	SerialState *s = opaque;

	return serial_ioport_read(s, (addr - s->base) >> s->it_shift);
	}

	static void serial_mm_writel (void *opaque,
	target_phys_addr_t addr, uint32_t value)
	{
	SerialState *s = opaque;

	serial_ioport_write(s, (addr - s->base) >> s->it_shift, value);
	}

	static CPUReadMemoryFunc *serial_mm_read[] = {
	&serial_mm_readb,
	&serial_mm_readw,
	&serial_mm_readl,
	};

	static CPUWriteMemoryFunc *serial_mm_write[] = {
	&serial_mm_writeb,
	&serial_mm_writew,
	&serial_mm_writel,
	};

	SerialState serial_mm_init (SetIRQFunc set_irq, void *opaque,
	target_ulong base, int it_shift,
	int irq, CharDriverState *chr)
	{
	SerialState *s;
	int s_io_memory;

	s = qemu_mallocz(sizeof(SerialState));
	if (!s)
	return NULL;
	s->set_irq = set_irq;
	s->irq_opaque = opaque;
	s->irq = irq;
	s->lsr = UART_LSR_TEMT \| UART_LSR_THRE;
	s->iir = UART_IIR_NO_INT;
	s->msr = UART_MSR_DCD \| UART_MSR_DSR \| UART_MSR_CTS;
	s->base = base;
	s->it_shift = it_shift;

	register_savevm("serial", base, 2, serial_save, serial_load, s);

	s_io_memory = cpu_register_io_memory(0, serial_mm_read,
	serial_mm_write, s);
	cpu_register_physical_memory(base, 8 << it_shift, s_io_memory);
	s->chr = chr;
	qemu_chr_add_handlers(chr, serial_can_receive1, serial_receive1,
	serial_event, s);
	return s;
	}