blob: 1f922c283532a9331fb4a97e410aa89edbacc86b [file] [log] [blame]
/*
* Virtio PCI Bindings
*
* Copyright IBM, Corp. 2007
* Copyright (c) 2009 CodeSourcery
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
* Paul Brook <paul@codesourcery.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include <inttypes.h>
#include "virtio.h"
#include "pci.h"
//#include "sysemu.h"
#include "msix.h"
#include "net.h"
/* from Linux's linux/virtio_pci.h */
/* A 32-bit r/o bitmask of the features supported by the host */
#define VIRTIO_PCI_HOST_FEATURES 0
/* A 32-bit r/w bitmask of features activated by the guest */
#define VIRTIO_PCI_GUEST_FEATURES 4
/* A 32-bit r/w PFN for the currently selected queue */
#define VIRTIO_PCI_QUEUE_PFN 8
/* A 16-bit r/o queue size for the currently selected queue */
#define VIRTIO_PCI_QUEUE_NUM 12
/* A 16-bit r/w queue selector */
#define VIRTIO_PCI_QUEUE_SEL 14
/* A 16-bit r/w queue notifier */
#define VIRTIO_PCI_QUEUE_NOTIFY 16
/* An 8-bit device status register. */
#define VIRTIO_PCI_STATUS 18
/* An 8-bit r/o interrupt status register. Reading the value will return the
* current contents of the ISR and will also clear it. This is effectively
* a read-and-acknowledge. */
#define VIRTIO_PCI_ISR 19
/* MSI-X registers: only enabled if MSI-X is enabled. */
/* A 16-bit vector for configuration changes. */
#define VIRTIO_MSI_CONFIG_VECTOR 20
/* A 16-bit vector for selected queue notifications. */
#define VIRTIO_MSI_QUEUE_VECTOR 22
/* Config space size */
#define VIRTIO_PCI_CONFIG_NOMSI 20
#define VIRTIO_PCI_CONFIG_MSI 24
#define VIRTIO_PCI_REGION_SIZE(dev) (msix_present(dev) ? \
VIRTIO_PCI_CONFIG_MSI : \
VIRTIO_PCI_CONFIG_NOMSI)
/* The remaining space is defined by each driver as the per-driver
* configuration space */
#define VIRTIO_PCI_CONFIG(dev) (msix_enabled(dev) ? \
VIRTIO_PCI_CONFIG_MSI : \
VIRTIO_PCI_CONFIG_NOMSI)
/* Virtio ABI version, if we increment this, we break the guest driver. */
#define VIRTIO_PCI_ABI_VERSION 0
/* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size. */
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
/* QEMU doesn't strictly need write barriers since everything runs in
* lock-step. We'll leave the calls to wmb() in though to make it obvious for
* KVM or if kqemu gets SMP support.
*/
#define wmb() do { } while (0)
/* PCI bindings. */
typedef struct {
PCIDevice pci_dev;
VirtIODevice *vdev;
uint32_t addr;
uint32_t class_code;
uint32_t nvectors;
} VirtIOPCIProxy;
/* virtio device */
static void virtio_pci_notify(void *opaque, uint16_t vector)
{
VirtIOPCIProxy *proxy = opaque;
if (msix_enabled(&proxy->pci_dev))
msix_notify(&proxy->pci_dev, vector);
else
qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
}
static void virtio_pci_save_config(void * opaque, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
pci_device_save(&proxy->pci_dev, f);
msix_save(&proxy->pci_dev, f);
if (msix_present(&proxy->pci_dev))
qemu_put_be16(f, proxy->vdev->config_vector);
}
static void virtio_pci_save_queue(void * opaque, int n, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
if (msix_present(&proxy->pci_dev))
qemu_put_be16(f, virtio_queue_vector(proxy->vdev, n));
}
static int virtio_pci_load_config(void * opaque, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
int ret;
ret = pci_device_load(&proxy->pci_dev, f);
if (ret) {
return ret;
}
msix_load(&proxy->pci_dev, f);
if (msix_present(&proxy->pci_dev)) {
qemu_get_be16s(f, &proxy->vdev->config_vector);
} else {
proxy->vdev->config_vector = VIRTIO_NO_VECTOR;
}
if (proxy->vdev->config_vector != VIRTIO_NO_VECTOR) {
return msix_vector_use(&proxy->pci_dev, proxy->vdev->config_vector);
}
return 0;
}
static int virtio_pci_load_queue(void * opaque, int n, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
uint16_t vector;
if (msix_present(&proxy->pci_dev)) {
qemu_get_be16s(f, &vector);
} else {
vector = VIRTIO_NO_VECTOR;
}
virtio_queue_set_vector(proxy->vdev, n, vector);
if (vector != VIRTIO_NO_VECTOR) {
return msix_vector_use(&proxy->pci_dev, vector);
}
return 0;
}
static void virtio_pci_reset(void *opaque)
{
VirtIOPCIProxy *proxy = opaque;
virtio_reset(proxy->vdev);
msix_reset(&proxy->pci_dev);
}
static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = proxy->vdev;
target_phys_addr_t pa;
switch (addr) {
case VIRTIO_PCI_GUEST_FEATURES:
/* Guest does not negotiate properly? We have to assume nothing. */
if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
if (vdev->bad_features)
val = vdev->bad_features(vdev);
else
val = 0;
}
if (vdev->set_features)
vdev->set_features(vdev, val);
vdev->features = val;
break;
case VIRTIO_PCI_QUEUE_PFN:
pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
if (pa == 0)
virtio_pci_reset(proxy);
else
virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
break;
case VIRTIO_PCI_QUEUE_SEL:
if (val < VIRTIO_PCI_QUEUE_MAX)
vdev->queue_sel = val;
break;
case VIRTIO_PCI_QUEUE_NOTIFY:
virtio_queue_notify(vdev, val);
break;
case VIRTIO_PCI_STATUS:
vdev->status = val & 0xFF;
if (vdev->status == 0)
virtio_pci_reset(proxy);
break;
case VIRTIO_MSI_CONFIG_VECTOR:
msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
/* Make it possible for guest to discover an error took place. */
if (msix_vector_use(&proxy->pci_dev, val) < 0)
val = VIRTIO_NO_VECTOR;
vdev->config_vector = val;
break;
case VIRTIO_MSI_QUEUE_VECTOR:
msix_vector_unuse(&proxy->pci_dev,
virtio_queue_vector(vdev, vdev->queue_sel));
/* Make it possible for guest to discover an error took place. */
if (msix_vector_use(&proxy->pci_dev, val) < 0)
val = VIRTIO_NO_VECTOR;
virtio_queue_set_vector(vdev, vdev->queue_sel, val);
break;
default:
fprintf(stderr, "%s: unexpected address 0x%x value 0x%x\n",
__func__, addr, val);
break;
}
}
static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
{
VirtIODevice *vdev = proxy->vdev;
uint32_t ret = 0xFFFFFFFF;
switch (addr) {
case VIRTIO_PCI_HOST_FEATURES:
ret = vdev->get_features(vdev);
ret |= (1 << VIRTIO_F_NOTIFY_ON_EMPTY);
ret |= (1 << VIRTIO_RING_F_INDIRECT_DESC);
ret |= (1 << VIRTIO_F_BAD_FEATURE);
break;
case VIRTIO_PCI_GUEST_FEATURES:
ret = vdev->features;
break;
case VIRTIO_PCI_QUEUE_PFN:
ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
>> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
break;
case VIRTIO_PCI_QUEUE_NUM:
ret = virtio_queue_get_num(vdev, vdev->queue_sel);
break;
case VIRTIO_PCI_QUEUE_SEL:
ret = vdev->queue_sel;
break;
case VIRTIO_PCI_STATUS:
ret = vdev->status;
break;
case VIRTIO_PCI_ISR:
/* reading from the ISR also clears it. */
ret = vdev->isr;
vdev->isr = 0;
qemu_set_irq(proxy->pci_dev.irq[0], 0);
break;
case VIRTIO_MSI_CONFIG_VECTOR:
ret = vdev->config_vector;
break;
case VIRTIO_MSI_QUEUE_VECTOR:
ret = virtio_queue_vector(vdev, vdev->queue_sel);
break;
default:
break;
}
return ret;
}
static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
return virtio_config_readb(proxy->vdev, addr);
}
static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
return virtio_config_readw(proxy->vdev, addr);
}
static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
return virtio_config_readl(proxy->vdev, addr);
}
static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
virtio_config_writeb(proxy->vdev, addr, val);
}
static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
virtio_config_writew(proxy->vdev, addr, val);
}
static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
addr -= proxy->addr;
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
virtio_config_writel(proxy->vdev, addr, val);
}
static void virtio_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev);
VirtIODevice *vdev = proxy->vdev;
unsigned config_len = VIRTIO_PCI_REGION_SIZE(pci_dev) + vdev->config_len;
proxy->addr = addr;
register_ioport_write(addr, config_len, 1, virtio_pci_config_writeb, proxy);
register_ioport_write(addr, config_len, 2, virtio_pci_config_writew, proxy);
register_ioport_write(addr, config_len, 4, virtio_pci_config_writel, proxy);
register_ioport_read(addr, config_len, 1, virtio_pci_config_readb, proxy);
register_ioport_read(addr, config_len, 2, virtio_pci_config_readw, proxy);
register_ioport_read(addr, config_len, 4, virtio_pci_config_readl, proxy);
if (vdev->config_len)
vdev->get_config(vdev, vdev->config);
}
static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
uint32_t val, int len)
{
pci_default_write_config(pci_dev, address, val, len);
msix_write_config(pci_dev, address, val, len);
}
static const VirtIOBindings virtio_pci_bindings = {
.notify = virtio_pci_notify,
.save_config = virtio_pci_save_config,
.load_config = virtio_pci_load_config,
.save_queue = virtio_pci_save_queue,
.load_queue = virtio_pci_load_queue,
};
static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
uint16_t vendor, uint16_t device,
uint16_t class_code, uint8_t pif)
{
uint8_t *config;
uint32_t size;
proxy->vdev = vdev;
config = proxy->pci_dev.config;
pci_config_set_vendor_id(config, vendor);
pci_config_set_device_id(config, device);
config[0x08] = VIRTIO_PCI_ABI_VERSION;
config[0x09] = pif;
pci_config_set_class(config, class_code);
config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
config[0x2c] = vendor & 0xFF;
config[0x2d] = (vendor >> 8) & 0xFF;
config[0x2e] = vdev->device_id & 0xFF;
config[0x2f] = (vdev->device_id >> 8) & 0xFF;
config[0x3d] = 1;
if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) {
pci_register_bar(&proxy->pci_dev, 1,
msix_bar_size(&proxy->pci_dev),
PCI_ADDRESS_SPACE_MEM,
msix_mmio_map);
proxy->pci_dev.config_write = virtio_write_config;
proxy->pci_dev.unregister = msix_uninit;
} else
vdev->nvectors = 0;
size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) + vdev->config_len;
if (size & (size-1))
size = 1 << qemu_fls(size);
pci_register_bar(&proxy->pci_dev, 0, size, PCI_ADDRESS_SPACE_IO,
virtio_map);
qemu_register_reset(virtio_pci_reset, proxy);
virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
}
static void virtio_blk_init_pci_with_class(PCIDevice *pci_dev,
uint16_t class_code)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_blk_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_BLOCK,
class_code, 0x00);
}
static void virtio_blk_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
if (proxy->class_code != PCI_CLASS_STORAGE_SCSI &&
proxy->class_code != PCI_CLASS_STORAGE_OTHER)
proxy->class_code = PCI_CLASS_STORAGE_SCSI;
virtio_blk_init_pci_with_class(pci_dev, proxy->class_code);
}
static void virtio_blk_init_pci_0_10(PCIDevice *pci_dev)
{
virtio_blk_init_pci_with_class(pci_dev, PCI_CLASS_STORAGE_OTHER);
}
static void virtio_console_init_pci_with_class(PCIDevice *pci_dev,
uint16_t class_code)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_console_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_CONSOLE,
class_code, 0x00);
}
static void virtio_console_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
if (proxy->class_code != PCI_CLASS_COMMUNICATION_OTHER &&
proxy->class_code != PCI_CLASS_DISPLAY_OTHER && /* qemu 0.10 */
proxy->class_code != PCI_CLASS_OTHERS) /* qemu-kvm */
proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
virtio_console_init_pci_with_class(pci_dev, proxy->class_code);
}
static void virtio_console_init_pci_0_10(PCIDevice *pci_dev)
{
virtio_console_init_pci_with_class(pci_dev, PCI_CLASS_DISPLAY_OTHER);
}
static void virtio_net_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_net_init(&pci_dev->qdev);
/* set nvectors from property, unless the user specified something
* via -net nic,model=virtio,vectors=n command line option */
if (pci_dev->qdev.nd->nvectors == NIC_NVECTORS_UNSPECIFIED)
if (proxy->nvectors != NIC_NVECTORS_UNSPECIFIED)
vdev->nvectors = proxy->nvectors;
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_NET,
PCI_CLASS_NETWORK_ETHERNET,
0x00);
/* make the actual value visible */
proxy->nvectors = vdev->nvectors;
}
static void virtio_balloon_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_balloon_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_BALLOON,
PCI_CLASS_MEMORY_RAM,
0x00);
}
static PCIDeviceInfo virtio_info[] = {
{
.qdev.name = "virtio-blk-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_blk_init_pci,
.qdev.props = (Property[]) {
{
.name = "class",
.info = &qdev_prop_hex32,
.offset = offsetof(VirtIOPCIProxy, class_code),
},
{/* end of list */}
},
},{
.qdev.name = "virtio-net-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_net_init_pci,
.qdev.props = (Property[]) {
{
.name = "vectors",
.info = &qdev_prop_uint32,
.offset = offsetof(VirtIOPCIProxy, nvectors),
.defval = (uint32_t[]) { NIC_NVECTORS_UNSPECIFIED },
},
{/* end of list */}
},
},{
.qdev.name = "virtio-console-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_console_init_pci,
.qdev.props = (Property[]) {
{
.name = "class",
.info = &qdev_prop_hex32,
.offset = offsetof(VirtIOPCIProxy, class_code),
},
{/* end of list */}
},
},{
.qdev.name = "virtio-balloon-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_balloon_init_pci,
},{
/* For compatibility with 0.10 */
.qdev.name = "virtio-blk-pci-0-10",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_blk_init_pci_0_10,
},{
.qdev.name = "virtio-console-pci-0-10",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_console_init_pci_0_10,
},{
/* end of list */
}
};
static void virtio_pci_register_devices(void)
{
pci_qdev_register_many(virtio_info);
}
device_init(virtio_pci_register_devices)