| /* |
| * MIPS emulation helpers for qemu. |
| * |
| * Copyright (c) 2004-2005 Jocelyn Mayer |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <stdarg.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <inttypes.h> |
| #include <signal.h> |
| #include <assert.h> |
| |
| #include "cpu.h" |
| #include "exec-all.h" |
| |
| /* MIPS32 4K MMU emulation */ |
| #ifdef MIPS_USES_R4K_TLB |
| static int map_address (CPUState *env, target_ulong *physical, int *prot, |
| target_ulong address, int rw, int access_type) |
| { |
| tlb_t *tlb; |
| target_ulong tag; |
| uint8_t ASID; |
| int i, n; |
| int ret; |
| |
| ret = -2; |
| tag = (address & 0xFFFFE000); |
| ASID = env->CP0_EntryHi & 0x000000FF; |
| for (i = 0; i < MIPS_TLB_NB; i++) { |
| tlb = &env->tlb[i]; |
| /* Check ASID, virtual page number & size */ |
| if ((tlb->G == 1 || tlb->ASID == ASID) && |
| tlb->VPN == tag && address < tlb->end2) { |
| /* TLB match */ |
| n = (address >> 12) & 1; |
| /* Check access rights */ |
| if (!(n ? tlb->V1 : tlb->V0)) |
| return -3; |
| if (rw == 0 || (n ? tlb->D1 : tlb->D0)) { |
| *physical = tlb->PFN[n] | (address & 0xFFF); |
| *prot = PAGE_READ; |
| if (n ? tlb->D1 : tlb->D0) |
| *prot |= PAGE_WRITE; |
| return 0; |
| } |
| return -4; |
| } |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| int get_physical_address (CPUState *env, target_ulong *physical, int *prot, |
| target_ulong address, int rw, int access_type) |
| { |
| int user_mode; |
| int ret; |
| |
| /* User mode can only access useg */ |
| user_mode = ((env->hflags & MIPS_HFLAG_MODE) == MIPS_HFLAG_UM) ? 1 : 0; |
| #if 0 |
| if (logfile) { |
| fprintf(logfile, "user mode %d h %08x\n", |
| user_mode, env->hflags); |
| } |
| #endif |
| if (user_mode && address > 0x7FFFFFFFUL) |
| return -1; |
| ret = 0; |
| if (address < 0x80000000UL) { |
| if (!(env->hflags & MIPS_HFLAG_ERL)) { |
| #ifdef MIPS_USES_R4K_TLB |
| ret = map_address(env, physical, prot, address, rw, access_type); |
| #else |
| *physical = address + 0x40000000UL; |
| *prot = PAGE_READ | PAGE_WRITE; |
| #endif |
| } else { |
| *physical = address; |
| *prot = PAGE_READ | PAGE_WRITE; |
| } |
| } else if (address < 0xA0000000UL) { |
| /* kseg0 */ |
| /* XXX: check supervisor mode */ |
| *physical = address - 0x80000000UL; |
| *prot = PAGE_READ | PAGE_WRITE; |
| } else if (address < 0xC0000000UL) { |
| /* kseg1 */ |
| /* XXX: check supervisor mode */ |
| *physical = address - 0xA0000000UL; |
| *prot = PAGE_READ | PAGE_WRITE; |
| } else if (address < 0xE0000000UL) { |
| /* kseg2 */ |
| #ifdef MIPS_USES_R4K_TLB |
| ret = map_address(env, physical, prot, address, rw, access_type); |
| #else |
| *physical = address; |
| *prot = PAGE_READ | PAGE_WRITE; |
| #endif |
| } else { |
| /* kseg3 */ |
| /* XXX: check supervisor mode */ |
| /* XXX: debug segment is not emulated */ |
| #ifdef MIPS_USES_R4K_TLB |
| ret = map_address(env, physical, prot, address, rw, access_type); |
| #else |
| *physical = address; |
| *prot = PAGE_READ | PAGE_WRITE; |
| #endif |
| } |
| #if 0 |
| if (logfile) { |
| fprintf(logfile, "%08x %d %d => %08x %d (%d)\n", address, rw, |
| access_type, *physical, *prot, ret); |
| } |
| #endif |
| |
| return ret; |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| target_ulong cpu_get_phys_page_debug(CPUState *env, target_ulong addr) |
| { |
| return addr; |
| } |
| #else |
| target_ulong cpu_get_phys_page_debug(CPUState *env, target_ulong addr) |
| { |
| target_ulong phys_addr; |
| int prot; |
| |
| if (get_physical_address(env, &phys_addr, &prot, addr, 0, ACCESS_INT) != 0) |
| return -1; |
| return phys_addr; |
| } |
| |
| void cpu_mips_init_mmu (CPUState *env) |
| { |
| } |
| #endif /* !defined(CONFIG_USER_ONLY) */ |
| |
| int cpu_mips_handle_mmu_fault (CPUState *env, target_ulong address, int rw, |
| int is_user, int is_softmmu) |
| { |
| target_ulong physical; |
| int prot; |
| int exception = 0, error_code = 0; |
| int access_type; |
| int ret = 0; |
| |
| if (logfile) { |
| #if 0 |
| cpu_dump_state(env, logfile, fprintf, 0); |
| #endif |
| fprintf(logfile, "%s pc %08x ad %08x rw %d is_user %d smmu %d\n", |
| __func__, env->PC, address, rw, is_user, is_softmmu); |
| } |
| |
| rw &= 1; |
| |
| /* data access */ |
| /* XXX: put correct access by using cpu_restore_state() |
| correctly */ |
| access_type = ACCESS_INT; |
| if (env->user_mode_only) { |
| /* user mode only emulation */ |
| ret = -2; |
| goto do_fault; |
| } |
| ret = get_physical_address(env, &physical, &prot, |
| address, rw, access_type); |
| if (logfile) { |
| fprintf(logfile, "%s address=%08x ret %d physical %08x prot %d\n", |
| __func__, address, ret, physical, prot); |
| } |
| if (ret == 0) { |
| ret = tlb_set_page(env, address & ~0xFFF, physical & ~0xFFF, prot, |
| is_user, is_softmmu); |
| } else if (ret < 0) { |
| do_fault: |
| switch (ret) { |
| default: |
| case -1: |
| /* Reference to kernel address from user mode or supervisor mode */ |
| /* Reference to supervisor address from user mode */ |
| if (rw) |
| exception = EXCP_AdES; |
| else |
| exception = EXCP_AdEL; |
| break; |
| case -2: |
| /* No TLB match for a mapped address */ |
| if (rw) |
| exception = EXCP_TLBS; |
| else |
| exception = EXCP_TLBL; |
| error_code = 1; |
| break; |
| case -3: |
| /* TLB match with no valid bit */ |
| if (rw) |
| exception = EXCP_TLBS; |
| else |
| exception = EXCP_TLBL; |
| error_code = 0; |
| break; |
| case -4: |
| /* TLB match but 'D' bit is cleared */ |
| exception = EXCP_LTLBL; |
| break; |
| |
| } |
| /* Raise exception */ |
| env->CP0_BadVAddr = address; |
| env->CP0_Context = (env->CP0_Context & 0xff800000) | |
| ((address >> 9) & 0x007ffff0); |
| env->CP0_EntryHi = |
| (env->CP0_EntryHi & 0x000000FF) | (address & 0xFFFFF000); |
| env->exception_index = exception; |
| env->error_code = error_code; |
| ret = 1; |
| } |
| |
| return ret; |
| } |
| |
| void do_interrupt (CPUState *env) |
| { |
| target_ulong pc, offset; |
| int cause = -1; |
| |
| if (logfile && env->exception_index != EXCP_EXT_INTERRUPT) { |
| fprintf(logfile, "%s enter: PC %08x EPC %08x cause %d excp %d\n", |
| __func__, env->PC, env->CP0_EPC, cause, env->exception_index); |
| } |
| if (env->exception_index == EXCP_EXT_INTERRUPT && |
| (env->hflags & MIPS_HFLAG_DM)) |
| env->exception_index = EXCP_DINT; |
| offset = 0x180; |
| switch (env->exception_index) { |
| case EXCP_DSS: |
| env->CP0_Debug |= 1 << CP0DB_DSS; |
| /* Debug single step cannot be raised inside a delay slot and |
| * resume will always occur on the next instruction |
| * (but we assume the pc has always been updated during |
| * code translation). |
| */ |
| env->CP0_DEPC = env->PC; |
| goto enter_debug_mode; |
| case EXCP_DINT: |
| env->CP0_Debug |= 1 << CP0DB_DINT; |
| goto set_DEPC; |
| case EXCP_DIB: |
| env->CP0_Debug |= 1 << CP0DB_DIB; |
| goto set_DEPC; |
| case EXCP_DBp: |
| env->CP0_Debug |= 1 << CP0DB_DBp; |
| goto set_DEPC; |
| case EXCP_DDBS: |
| env->CP0_Debug |= 1 << CP0DB_DDBS; |
| goto set_DEPC; |
| case EXCP_DDBL: |
| env->CP0_Debug |= 1 << CP0DB_DDBL; |
| goto set_DEPC; |
| set_DEPC: |
| if (env->hflags & MIPS_HFLAG_BMASK) { |
| /* If the exception was raised from a delay slot, |
| * come back to the jump |
| */ |
| env->CP0_DEPC = env->PC - 4; |
| env->hflags &= ~MIPS_HFLAG_BMASK; |
| } else { |
| env->CP0_DEPC = env->PC; |
| } |
| enter_debug_mode: |
| env->hflags |= MIPS_HFLAG_DM; |
| /* EJTAG probe trap enable is not implemented... */ |
| pc = 0xBFC00480; |
| break; |
| case EXCP_RESET: |
| #ifdef MIPS_USES_R4K_TLB |
| env->CP0_random = MIPS_TLB_NB - 1; |
| #endif |
| env->CP0_Wired = 0; |
| env->CP0_Config0 = MIPS_CONFIG0; |
| #if defined (MIPS_CONFIG1) |
| env->CP0_Config1 = MIPS_CONFIG1; |
| #endif |
| #if defined (MIPS_CONFIG2) |
| env->CP0_Config2 = MIPS_CONFIG2; |
| #endif |
| #if defined (MIPS_CONFIG3) |
| env->CP0_Config3 = MIPS_CONFIG3; |
| #endif |
| env->CP0_WatchLo = 0; |
| env->CP0_Status = (1 << CP0St_CU0) | (1 << CP0St_BEV); |
| goto set_error_EPC; |
| case EXCP_SRESET: |
| env->CP0_Status = (1 << CP0St_CU0) | (1 << CP0St_BEV) | |
| (1 << CP0St_SR); |
| env->CP0_WatchLo = 0; |
| goto set_error_EPC; |
| case EXCP_NMI: |
| env->CP0_Status = (1 << CP0St_CU0) | (1 << CP0St_BEV) | |
| (1 << CP0St_NMI); |
| set_error_EPC: |
| if (env->hflags & MIPS_HFLAG_BMASK) { |
| /* If the exception was raised from a delay slot, |
| * come back to the jump |
| */ |
| env->CP0_ErrorEPC = env->PC - 4; |
| env->hflags &= ~MIPS_HFLAG_BMASK; |
| } else { |
| env->CP0_ErrorEPC = env->PC; |
| } |
| env->hflags = MIPS_HFLAG_ERL; |
| pc = 0xBFC00000; |
| break; |
| case EXCP_MCHECK: |
| cause = 24; |
| goto set_EPC; |
| case EXCP_EXT_INTERRUPT: |
| cause = 0; |
| if (env->CP0_Cause & (1 << CP0Ca_IV)) |
| offset = 0x200; |
| goto set_EPC; |
| case EXCP_DWATCH: |
| cause = 23; |
| /* XXX: TODO: manage defered watch exceptions */ |
| goto set_EPC; |
| case EXCP_AdEL: |
| case EXCP_AdES: |
| cause = 4; |
| goto set_EPC; |
| case EXCP_TLBL: |
| case EXCP_TLBF: |
| cause = 2; |
| if (env->error_code == 1 && !(env->hflags & MIPS_HFLAG_EXL)) |
| offset = 0x000; |
| goto set_EPC; |
| case EXCP_IBE: |
| cause = 6; |
| goto set_EPC; |
| case EXCP_DBE: |
| cause = 7; |
| goto set_EPC; |
| case EXCP_SYSCALL: |
| cause = 8; |
| goto set_EPC; |
| case EXCP_BREAK: |
| cause = 9; |
| goto set_EPC; |
| case EXCP_RI: |
| cause = 10; |
| goto set_EPC; |
| case EXCP_CpU: |
| cause = 11; |
| env->CP0_Cause = (env->CP0_Cause & ~0x03000000) | (env->error_code << 28); |
| goto set_EPC; |
| case EXCP_OVERFLOW: |
| cause = 12; |
| goto set_EPC; |
| case EXCP_TRAP: |
| cause = 13; |
| goto set_EPC; |
| case EXCP_LTLBL: |
| cause = 1; |
| goto set_EPC; |
| case EXCP_TLBS: |
| cause = 3; |
| if (env->error_code == 1 && !(env->hflags & MIPS_HFLAG_EXL)) |
| offset = 0x000; |
| goto set_EPC; |
| set_EPC: |
| if (env->CP0_Status & (1 << CP0St_BEV)) { |
| pc = 0xBFC00200; |
| } else { |
| pc = 0x80000000; |
| } |
| env->hflags |= MIPS_HFLAG_EXL; |
| pc += offset; |
| env->CP0_Cause = (env->CP0_Cause & ~0x7C) | (cause << 2); |
| if (env->hflags & MIPS_HFLAG_BMASK) { |
| /* If the exception was raised from a delay slot, |
| * come back to the jump |
| */ |
| env->CP0_EPC = env->PC - 4; |
| env->CP0_Cause |= 0x80000000; |
| env->hflags &= ~MIPS_HFLAG_BMASK; |
| } else { |
| env->CP0_EPC = env->PC; |
| env->CP0_Cause &= ~0x80000000; |
| } |
| break; |
| default: |
| if (logfile) { |
| fprintf(logfile, "Invalid MIPS exception %d. Exiting\n", |
| env->exception_index); |
| } |
| printf("Invalid MIPS exception %d. Exiting\n", env->exception_index); |
| exit(1); |
| } |
| env->PC = pc; |
| if (logfile && env->exception_index != EXCP_EXT_INTERRUPT) { |
| fprintf(logfile, "%s: PC %08x EPC %08x cause %d excp %d\n" |
| " S %08x C %08x A %08x D %08x\n", |
| __func__, env->PC, env->CP0_EPC, cause, env->exception_index, |
| env->CP0_Status, env->CP0_Cause, env->CP0_BadVAddr, |
| env->CP0_DEPC); |
| } |
| env->exception_index = EXCP_NONE; |
| } |
