blob: cf3a5f32fa7dba9bfa658b9754ca66d9eb11b592 [file] [log] [blame]
/*
* QEMU PPC CHRP/PMAC hardware System Emulator
*
* Copyright (c) 2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
#define BIOS_FILENAME "ppc_rom.bin"
#define NVRAM_SIZE 0x2000
#define KERNEL_LOAD_ADDR 0x01000000
#define INITRD_LOAD_ADDR 0x01800000
/* MacIO devices (mapped inside the MacIO address space): CUDA, DBDMA,
NVRAM (not implemented). */
static int dbdma_mem_index;
static int cuda_mem_index;
static int ide0_mem_index;
static int ide1_mem_index;
static int openpic_mem_index;
/* DBDMA: currently no op - should suffice right now */
static void dbdma_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)
{
printf("%s: 0x%08x <= 0x%08x\n", __func__, addr, value);
}
static void dbdma_writew (void *opaque, target_phys_addr_t addr, uint32_t value)
{
}
static void dbdma_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
{
}
static uint32_t dbdma_readb (void *opaque, target_phys_addr_t addr)
{
printf("%s: 0x%08x => 0x00000000\n", __func__, addr);
return 0;
}
static uint32_t dbdma_readw (void *opaque, target_phys_addr_t addr)
{
return 0;
}
static uint32_t dbdma_readl (void *opaque, target_phys_addr_t addr)
{
return 0;
}
static CPUWriteMemoryFunc *dbdma_write[] = {
&dbdma_writeb,
&dbdma_writew,
&dbdma_writel,
};
static CPUReadMemoryFunc *dbdma_read[] = {
&dbdma_readb,
&dbdma_readw,
&dbdma_readl,
};
static void macio_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
cpu_register_physical_memory(addr + 0x08000, 0x1000, dbdma_mem_index);
cpu_register_physical_memory(addr + 0x16000, 0x2000, cuda_mem_index);
cpu_register_physical_memory(addr + 0x1f000, 0x1000, ide0_mem_index);
cpu_register_physical_memory(addr + 0x20000, 0x1000, ide1_mem_index);
cpu_register_physical_memory(addr + 0x40000, 0x40000, openpic_mem_index);
}
static void macio_init(PCIBus *bus)
{
PCIDevice *d;
d = pci_register_device(bus, "macio", sizeof(PCIDevice),
-1, NULL, NULL);
/* Note: this code is strongly inspirated from the corresponding code
in PearPC */
d->config[0x00] = 0x6b; // vendor_id
d->config[0x01] = 0x10;
d->config[0x02] = 0x22;
d->config[0x03] = 0x00;
d->config[0x0a] = 0x00; // class_sub = pci2pci
d->config[0x0b] = 0xff; // class_base = bridge
d->config[0x0e] = 0x00; // header_type
d->config[0x3d] = 0x01; // interrupt on pin 1
dbdma_mem_index = cpu_register_io_memory(0, dbdma_read, dbdma_write, NULL);
pci_register_io_region(d, 0, 0x80000,
PCI_ADDRESS_SPACE_MEM, macio_map);
}
/* PowerPC PREP hardware initialisation */
void ppc_chrp_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename)
{
char buf[1024];
openpic_t *openpic;
m48t59_t *nvram;
int PPC_io_memory;
int ret, linux_boot, i;
unsigned long bios_offset;
uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
PCIBus *pci_bus;
linux_boot = (kernel_filename != NULL);
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
/* allocate and load BIOS */
bios_offset = ram_size + vga_ram_size;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
ret = load_image(buf, phys_ram_base + bios_offset);
if (ret != BIOS_SIZE) {
fprintf(stderr, "qemu: could not load PPC PREP bios '%s'\n", buf);
exit(1);
}
cpu_register_physical_memory((uint32_t)(-BIOS_SIZE),
BIOS_SIZE, bios_offset | IO_MEM_ROM);
cpu_single_env->nip = 0xfffffffc;
if (linux_boot) {
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image(initrd_filename,
phys_ram_base + initrd_base);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
}
/* Register CPU as a 74x/75x */
cpu_ppc_register(cpu_single_env, 0x00080000);
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(cpu_single_env, 100UL * 1000UL * 1000UL);
isa_mem_base = 0x80000000;
pci_bus = pci_pmac_init();
/* Register 8 MB of ISA IO space */
PPC_io_memory = cpu_register_io_memory(0, PPC_io_read, PPC_io_write, NULL);
cpu_register_physical_memory(0xF2000000, 0x00800000, PPC_io_memory);
/* init basic PC hardware */
vga_initialize(pci_bus, ds, phys_ram_base + ram_size, ram_size,
vga_ram_size);
openpic = openpic_init(NULL, &openpic_mem_index, 1);
pci_pmac_set_openpic(pci_bus, openpic);
/* XXX: suppress that */
pic_init();
/* XXX: use Mac Serial port */
serial_init(0x3f8, 4, serial_hds[0]);
for(i = 0; i < nb_nics; i++) {
pci_ne2000_init(pci_bus, &nd_table[i]);
}
ide0_mem_index = pmac_ide_init(&bs_table[0], openpic, 0x13);
ide1_mem_index = pmac_ide_init(&bs_table[2], openpic, 0x13);
/* cuda also initialize ADB */
cuda_mem_index = cuda_init(openpic, 0x19);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
macio_init(pci_bus);
nvram = m48t59_init(8, 0xFFF04000, 0x0074, NVRAM_SIZE);
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
PPC_NVRAM_set_params(nvram, NVRAM_SIZE, "CHRP", ram_size, boot_device,
kernel_base, kernel_size,
kernel_cmdline,
initrd_base, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth);
/* No PCI init: the BIOS will do it */
}