| # ufs.c |
| ufs_irq_raise(void) "INTx" |
| ufs_irq_lower(void) "INTx" |
| ufs_mmio_read(uint64_t addr, uint64_t data, unsigned size) "addr 0x%"PRIx64" data 0x%"PRIx64" size %d" |
| ufs_mmio_write(uint64_t addr, uint64_t data, unsigned size) "addr 0x%"PRIx64" data 0x%"PRIx64" size %d" |
| ufs_process_db(uint32_t slot) "UTRLDBR slot %"PRIu32"" |
| ufs_process_req(uint32_t slot) "UTRLDBR slot %"PRIu32"" |
| ufs_complete_req(uint32_t slot) "UTRLDBR slot %"PRIu32"" |
| ufs_sendback_req(uint32_t slot) "UTRLDBR slot %"PRIu32"" |
| ufs_exec_nop_cmd(uint32_t slot) "UTRLDBR slot %"PRIu32"" |
| ufs_exec_scsi_cmd(uint32_t slot, uint8_t lun, uint8_t opcode) "slot %"PRIu32", lun 0x%"PRIx8", opcode 0x%"PRIx8"" |
| ufs_exec_query_cmd(uint32_t slot, uint8_t opcode) "slot %"PRIu32", opcode 0x%"PRIx8"" |
| ufs_process_uiccmd(uint32_t uiccmd, uint32_t ucmdarg1, uint32_t ucmdarg2, uint32_t ucmdarg3) "uiccmd 0x%"PRIx32", ucmdarg1 0x%"PRIx32", ucmdarg2 0x%"PRIx32", ucmdarg3 0x%"PRIx32"" |
| |
| # lu.c |
| ufs_scsi_check_condition(uint32_t tag, uint8_t key, uint8_t asc, uint8_t ascq) "Command complete tag=0x%x sense=%d/%d/%d" |
| ufs_scsi_read_complete(uint32_t tag, size_t size) "Data ready tag=0x%x len=%zd" |
| ufs_scsi_read_data_count(uint32_t sector_count) "Read sector_count=%d" |
| ufs_scsi_read_data_invalid(void) "Data transfer direction invalid" |
| ufs_scsi_write_complete_noio(uint32_t tag, size_t size) "Write complete tag=0x%x more=%zd" |
| ufs_scsi_write_data_invalid(void) "Data transfer direction invalid" |
| ufs_scsi_emulate_vpd_page_00(size_t xfer) "Inquiry EVPD[Supported pages] buffer size %zd" |
| ufs_scsi_emulate_vpd_page_80_not_supported(void) "Inquiry EVPD[Serial number] not supported" |
| ufs_scsi_emulate_vpd_page_80(size_t xfer) "Inquiry EVPD[Serial number] buffer size %zd" |
| ufs_scsi_emulate_vpd_page_87(size_t xfer) "Inquiry EVPD[Mode Page Policy] buffer size %zd" |
| ufs_scsi_emulate_mode_sense(int cmd, int page, size_t xfer, int control) "Mode Sense(%d) (page %d, xfer %zd, page_control %d)" |
| ufs_scsi_emulate_read_data(int buflen) "Read buf_len=%d" |
| ufs_scsi_emulate_write_data(int buflen) "Write buf_len=%d" |
| ufs_scsi_emulate_command_START_STOP(void) "START STOP UNIT" |
| ufs_scsi_emulate_command_FORMAT_UNIT(void) "FORMAT UNIT" |
| ufs_scsi_emulate_command_SEND_DIAGNOSTIC(void) "SEND DIAGNOSTIC" |
| ufs_scsi_emulate_command_SAI_16(void) "SAI READ CAPACITY(16)" |
| ufs_scsi_emulate_command_SAI_unsupported(void) "Unsupported Service Action In" |
| ufs_scsi_emulate_command_MODE_SELECT_10(size_t xfer) "Mode Select(10) (len %zd)" |
| ufs_scsi_emulate_command_VERIFY(int bytchk) "Verify (bytchk %d)" |
| ufs_scsi_emulate_command_UNKNOWN(int cmd, const char *name) "Unknown SCSI command (0x%2.2x=%s)" |
| ufs_scsi_dma_command_READ(uint64_t lba, uint32_t len) "Read (block %" PRIu64 ", count %u)" |
| ufs_scsi_dma_command_WRITE(uint64_t lba, int len) "Write (block %" PRIu64 ", count %u)" |
| |
| # error condition |
| ufs_err_dma_read_utrd(uint32_t slot, uint64_t addr) "failed to read utrd. UTRLDBR slot %"PRIu32", UTRD dma addr %"PRIu64"" |
| ufs_err_dma_read_req_upiu(uint32_t slot, uint64_t addr) "failed to read req upiu. UTRLDBR slot %"PRIu32", request upiu addr %"PRIu64"" |
| ufs_err_dma_read_prdt(uint32_t slot, uint64_t addr) "failed to read prdt. UTRLDBR slot %"PRIu32", prdt addr %"PRIu64"" |
| ufs_err_dma_write_utrd(uint32_t slot, uint64_t addr) "failed to write utrd. UTRLDBR slot %"PRIu32", UTRD dma addr %"PRIu64"" |
| ufs_err_dma_write_rsp_upiu(uint32_t slot, uint64_t addr) "failed to write rsp upiu. UTRLDBR slot %"PRIu32", response upiu addr %"PRIu64"" |
| ufs_err_utrl_slot_error(uint32_t slot) "UTRLDBR slot %"PRIu32" is in error" |
| ufs_err_utrl_slot_busy(uint32_t slot) "UTRLDBR slot %"PRIu32" is busy" |
| ufs_err_unsupport_register_offset(uint32_t offset) "Register offset 0x%"PRIx32" is not yet supported" |
| ufs_err_invalid_register_offset(uint32_t offset) "Register offset 0x%"PRIx32" is invalid" |
| ufs_err_scsi_cmd_invalid_lun(uint8_t lun) "scsi command has invalid lun: 0x%"PRIx8"" |
| ufs_err_query_flag_not_readable(uint8_t idn) "query flag idn 0x%"PRIx8" is denied to read" |
| ufs_err_query_flag_not_writable(uint8_t idn) "query flag idn 0x%"PRIx8" is denied to write" |
| ufs_err_query_attr_not_readable(uint8_t idn) "query attribute idn 0x%"PRIx8" is denied to read" |
| ufs_err_query_attr_not_writable(uint8_t idn) "query attribute idn 0x%"PRIx8" is denied to write" |
| ufs_err_query_invalid_opcode(uint8_t opcode) "query request has invalid opcode. opcode: 0x%"PRIx8"" |
| ufs_err_query_invalid_idn(uint8_t opcode, uint8_t idn) "query request has invalid idn. opcode: 0x%"PRIx8", idn 0x%"PRIx8"" |
| ufs_err_query_invalid_index(uint8_t opcode, uint8_t index) "query request has invalid index. opcode: 0x%"PRIx8", index 0x%"PRIx8"" |
| ufs_err_invalid_trans_code(uint32_t slot, uint8_t trans_code) "request upiu has invalid transaction code. slot: %"PRIu32", trans_code: 0x%"PRIx8"" |
