| # NOTE: If you have no `make' program at all to process this makefile, run |
| # `build.sh' instead. |
| # |
| # Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. |
| # This file is part of GNU Make. |
| # |
| # GNU Make is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2, or (at your option) |
| # any later version. |
| # |
| # GNU Make is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with GNU Make; see the file COPYING. If not, write to |
| # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| # |
| # Makefile for GNU Make |
| # |
| |
| # Ultrix 2.2 make doesn't expand the value of VPATH. |
| VPATH = @srcdir@ |
| # This must repeat the value, because configure will remove `VPATH = .'. |
| srcdir = @srcdir@ |
| |
| CC = @CC@ |
| |
| CFLAGS = @CFLAGS@ |
| LDFLAGS = @LDFLAGS@ |
| |
| # How to invoke ranlib. This is only used by the `glob' subdirectory. |
| RANLIB = @RANLIB@ |
| |
| # Define these for your system as follows: |
| # -DNO_ARCHIVES To disable `ar' archive support. |
| # -DNO_FLOAT To avoid using floating-point numbers. |
| # -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2. |
| # Some compilers apparently accept this |
| # without complaint but produce losing code, |
| # so beware. |
| # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline. |
| # See also `config.h'. |
| defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" |
| |
| # Which flavor of remote job execution support to use. |
| # The code is found in `remote-$(REMOTE).c'. |
| REMOTE = @REMOTE@ |
| |
| # If you are using the GNU C library, or have the GNU getopt functions in |
| # your C library, you can comment these out. |
| GETOPT = getopt.o getopt1.o |
| GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h |
| |
| # If you are using the GNU C library, or have the GNU glob functions in |
| # your C library, you can comment this out. GNU make uses special hooks |
| # into the glob functions to be more efficient (by using make's directory |
| # cache for globbing), so you must use the GNU functions even if your |
| # system's C library has the 1003.2 glob functions already. Also, the glob |
| # functions in the AIX and HPUX C libraries are said to be buggy. |
| GLOB = glob/libglob.a |
| |
| # If your system doesn't have alloca, or the one provided is bad, define this. |
| ALLOCA = @ALLOCA@ |
| ALLOCA_SRC = $(srcdir)/alloca.c |
| |
| # If your system needs extra libraries loaded in, define them here. |
| # System V probably need -lPW for alloca. HP-UX 7.0's alloca in |
| # libPW.a is broken on HP9000s300 and HP9000s400 machines. Use |
| # alloca.c instead on those machines. |
| LOADLIBES = @LIBS@ |
| |
| # Any extra object files your system needs. |
| extras = @LIBOBJS@ |
| |
| # Common prefix for machine-independent installed files. |
| prefix = /usr/local |
| # Common prefix for machine-dependent installed files. |
| exec_prefix = $(prefix) |
| |
| # Directory to install `make' in. |
| bindir = $(exec_prefix)/bin |
| # Directory to find libraries in for `-lXXX'. |
| libdir = $(exec_prefix)/lib |
| # Directory to search by default for included makefiles. |
| includedir = $(prefix)/include |
| # Directory to install the Info files in. |
| infodir = $(prefix)/info |
| # Directory to install the man page in. |
| mandir = $(prefix)/man/man$(manext) |
| # Number to put on the man page filename. |
| manext = 1 |
| # Prefix to put on installed `make' binary file name. |
| binprefix = |
| # Prefix to put on installed `make' man page file name. |
| manprefix = $(binprefix) |
| |
| # Whether or not make needs to be installed setgid. |
| # The value should be either `true' or `false'. |
| # On many systems, the getloadavg function (used to implement the `-l' |
| # switch) will not work unless make is installed setgid kmem. |
| install_setgid = @NEED_SETGID@ |
| # Install make setgid to this group so it can read /dev/kmem. |
| group = @KMEM_GROUP@ |
| |
| # Program to install `make'. |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| # Program to install the man page. |
| INSTALL_DATA = @INSTALL_DATA@ |
| # Generic install program. |
| INSTALL = @INSTALL@ |
| |
| # Program to format Texinfo source into Info files. |
| MAKEINFO = makeinfo |
| # Program to format Texinfo source into DVI files. |
| TEXI2DVI = texi2dvi |
| |
| # Programs to make tags files. |
| ETAGS = etags -tw |
| CTAGS = ctags -tw |
| |
| objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \ |
| rule.o implicit.o default.o variable.o expand.o function.o \ |
| vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o \ |
| $(GLOB) $(GETOPT) $(ALLOCA) $(extras) |
| srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c \ |
| $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c \ |
| $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c \ |
| $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c \ |
| $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c \ |
| $(srcdir)/vpath.c $(srcdir)/version.c \ |
| $(srcdir)/remote-$(REMOTE).c \ |
| $(srcdir)/ar.c $(srcdir)/arscan.c \ |
| $(srcdir)/signame.c $(srcdir)/signame.h $(GETOPT_SRC) \ |
| $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/file.h \ |
| $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h \ |
| $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in |
| |
| |
| .SUFFIXES: |
| .SUFFIXES: .o .c .h .ps .dvi .info .texinfo |
| |
| all: make |
| check: # No tests. |
| info: make.info |
| dvi: make.dvi |
| # Some makes apparently use .PHONY as the default goal is it is before `all'. |
| .PHONY: all check info dvi |
| |
| make.info: make.texinfo |
| $(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info |
| |
| make.dvi: make.texinfo |
| $(TEXI2DVI) $(srcdir)/make.texinfo |
| |
| make.ps: make.dvi |
| dvi2ps make.dvi > make.ps |
| |
| make: $(objs) |
| $(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new |
| mv -f make.new make |
| |
| # -I. is needed to find config.h in the build directory. |
| .c.o: |
| $(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \ |
| $(CFLAGS) $< $(OUTPUT_OPTION) |
| |
| # For some losing Unix makes. |
| SHELL = /bin/sh |
| MAKE = make |
| |
| glob/libglob.a: FORCE config.h |
| cd glob; $(MAKE) CC='$(CC)' CFLAGS='$(CFLAGS) -I..' \ |
| CPPFLAGS='$(CPPFLAGS) -DHAVE_CONFIG_H' \ |
| RANLIB='$(RANLIB)' \ |
| libglob.a |
| FORCE: |
| |
| tagsrcs = $(srcs) $(srcdir)/remote-*.c |
| TAGS: $(tagsrcs) |
| $(ETAGS) $(tagsrcs) |
| tags: $(tagsrcs) |
| $(CTAGS) $(tagsrcs) |
| |
| .PHONY: install installdirs |
| install: installdirs \ |
| $(bindir)/$(binprefix)make $(infodir)/make.info \ |
| $(mandir)/$(manprefix)make.$(manext) |
| |
| installdirs: |
| $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir) |
| |
| $(bindir)/$(binprefix)make: make |
| $(INSTALL_PROGRAM) make $@.new |
| @if $(install_setgid); then \ |
| if chgrp $(group) $@.new && chmod g+s $@.new; then \ |
| echo "chgrp $(group) $@.new && chmod g+s $@.new"; \ |
| else \ |
| echo "$@ needs to be owned by group $(group) and setgid;"; \ |
| echo "otherwise the \`-l' option will probably not work."; \ |
| echo "You may need special priveleges to install $@."; \ |
| fi; \ |
| else true; fi |
| # Some systems can't deal with renaming onto a running binary. |
| -rm -f $@.old |
| -mv $@ $@.old |
| mv $@.new $@ |
| |
| $(infodir)/make.info: make.info |
| if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ |
| for file in $${dir}/make.info*; do \ |
| name="`basename $$file`"; \ |
| $(INSTALL_DATA) $$file \ |
| `echo $@ | sed "s,make.info\$$,$$name,"`; \ |
| done |
| # Run install-info only if it exists. |
| # Use `if' instead of just prepending `-' to the |
| # line so we notice real errors from install-info. |
| # We use `$(SHELL) -c' because some shells do not |
| # fail gracefully when there is an unknown command. |
| if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ |
| install-info --infodir=$(infodir) $$dir/make.info; \ |
| else true; fi |
| |
| $(mandir)/$(manprefix)make.$(manext): make.man |
| $(INSTALL_DATA) $(srcdir)/make.man $@ |
| |
| |
| loadavg: loadavg.c config.h |
| $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \ |
| loadavg.c $(LOADLIBES) -o $@ |
| # We copy getloadavg.c into a different file rather than compiling it |
| # directly because some compilers clobber getloadavg.o in the process. |
| loadavg.c: getloadavg.c |
| ln $(srcdir)/getloadavg.c loadavg.c || \ |
| cp $(srcdir)/getloadavg.c loadavg.c |
| check-loadavg: loadavg |
| @echo The system uptime program believes the load average to be: |
| -uptime |
| @echo The GNU load average checking code believes: |
| ./loadavg |
| check: check-loadavg |
| |
| |
| .PHONY: clean realclean distclean mostlyclean |
| clean: glob-clean |
| -rm -f make loadavg *.o core make.info* make.dvi |
| distclean: clean glob-realclean |
| -rm -f Makefile config.h config.status build.sh stamp-config |
| -rm -f TAGS tags |
| -rm -f make.?? make.??s make.log make.toc make.*aux |
| -rm -f loadavg.c |
| realclean: distclean |
| mostlyclean: clean |
| |
| .PHONY: glob-clean glob-realclean |
| glob-clean glob-realclean: |
| cd glob; $(MAKE) $@ |
| |
| Makefile: config.status $(srcdir)/Makefile.in |
| $(SHELL) config.status |
| glob/Makefile: config.status $(srcdir)/glob/Makefile.in |
| $(SHELL) config.status |
| config.h: stamp-config ; |
| stamp-config: config.status $(srcdir)/config.h.in |
| $(SHELL) config.status |
| touch stamp-config |
| |
| # These rules cause too much trouble. |
| #configure: configure.in |
| # autoconf $(ACFLAGS) |
| #config.h.in: configure.in |
| # autoheader $(ACFLAGS) |
| |
| # This tells versions [3.59,3.63) of GNU make not to export all variables. |
| .NOEXPORT: |
| |
| # The automatically generated dependencies below may omit config.h |
| # because it is included with ``#include <config.h>'' rather than |
| # ``#include "config.h"''. So we add the explicit dependency to make sure. |
| $(objs): config.h |
| |
| # Automatically generated dependencies will be put at the end of the file. |
| |