// Copyright 2016 The Fuchsia Authors
// Copyright (c) 2009 Corey Tabaka
//
// Use of this source code is governed by a MIT-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/MIT

#include <sys/types.h>

#include <assert.h>
#include <debug.h>
#include <err.h>
#include <inttypes.h>
#include <reg.h>
#include <trace.h>

#include <arch/x86.h>
#include <arch/x86/apic.h>
#include <arch/x86/feature.h>
#include <arch/x86/pvclock.h>
#include <arch/x86/timer_freq.h>
#include <dev/interrupt.h>
#include <fbl/algorithm.h>
#include <kernel/cmdline.h>
#include <kernel/spinlock.h>
#include <kernel/thread.h>
#include <lib/fixed_point.h>
#include <lk/init.h>
#include <platform.h>
#include <platform/console.h>
#include <platform/pc.h>
#include <platform/pc/acpi.h>
#include <platform/pc/hpet.h>
#include <platform/pc/timer.h>
#include <platform/timer.h>
#include <pow2.h>
#include <zircon/time.h>
#include <zircon/types.h>

#include "platform_p.h"

// Current timer scheme:
// The HPET is used to calibrate the local APIC timers and the TSC.  If the
// HPET is not present, we will fallback to calibrating using the PIT.
//
// For wall-time, we use the following mechanisms, in order of highest
// preference to least:
// 1) TSC: If the CPU advertises an invariant TSC, then we will use the TSC for
// tracking wall time in a tickless manner.
// 2) HPET: If there is an HPET present, we will use its count to track wall
// time in a tickless manner.
// 3) PIT: We will use periodic interrupts to update wall time.
//
// The local APICs are responsible for handling timer callbacks
// sent from the scheduler.

enum clock_source {
    CLOCK_PIT,
    CLOCK_HPET,
    CLOCK_TSC,

    CLOCK_COUNT
};

const char* clock_name[] = {
        [CLOCK_PIT] = "PIT",
        [CLOCK_HPET] = "HPET",
        [CLOCK_TSC] = "TSC",
};
static_assert(fbl::count_of(clock_name) == CLOCK_COUNT, "");

// PIT time accounting info
static struct fp_32_64 us_per_pit;
static volatile uint64_t pit_ticks;
static uint16_t pit_divisor;
static uint32_t ns_per_pit_rounded_up;

// Whether or not we have an Invariant TSC (controls whether we use the PIT or
// not after initialization).  The Invariant TSC is rate-invariant under P-, C-,
// and T-state transitions.
static bool invariant_tsc;
// Whether or not we have a Constant TSC (controls whether we bother calibrating
// the TSC).  Constant TSC predates the Invariant TSC.  The Constant TSC is
// rate-invariant under P-state transitions.
static bool constant_tsc;

static enum clock_source wall_clock;
static enum clock_source calibration_clock;

// APIC timer calibration values
static bool use_tsc_deadline;
static uint32_t apic_ticks_per_ms = 0;
static struct fp_32_64 apic_ticks_per_ns;
static uint8_t apic_divisor = 0;

// TSC timer calibration values
static uint64_t tsc_ticks_per_ms;
static struct fp_32_64 ns_per_tsc;
static struct fp_32_64 tsc_per_ns;
static uint32_t ns_per_tsc_rounded_up;

// HPET calibration values
static struct fp_32_64 ns_per_hpet;
static uint32_t ns_per_hpet_rounded_up;

#define INTERNAL_FREQ 1193182U
#define INTERNAL_FREQ_3X 3579546U

#define INTERNAL_FREQ_TICKS_PER_MS (INTERNAL_FREQ / 1000)

/* Maximum amount of time that can be program on the timer to schedule the next
 *  interrupt, in miliseconds */
#define MAX_TIMER_INTERVAL ZX_MSEC(55)

#define LOCAL_TRACE 0

zx_time_t current_time(void) {
    zx_time_t time;

    switch (wall_clock) {
    case CLOCK_TSC: {
        uint64_t tsc = rdtsc();
        time = ticks_to_nanos(tsc);
        break;
    }
    case CLOCK_HPET: {
        uint64_t counter = hpet_get_value();
        time = u64_mul_u64_fp32_64(counter, ns_per_hpet);
        break;
    }
    case CLOCK_PIT: {
        time = u64_mul_u64_fp32_64(pit_ticks, us_per_pit) * 1000;
        break;
    }
    default:
        panic("Invalid wall clock source\n");
    }

    return time;
}

// Round up t to a clock tick, so that when the APIC timer fires, the wall time
// will have elapsed.
static zx_time_t discrete_time_roundup(zx_time_t t) {
    zx_duration_t value;
    switch (wall_clock) {
    case CLOCK_TSC: {
        value = ns_per_tsc_rounded_up;
        break;
    }
    case CLOCK_HPET: {
        value = ns_per_hpet_rounded_up;
        break;
    }
    case CLOCK_PIT: {
        value = ns_per_pit_rounded_up;
        break;
    }
    default:
        panic("Invalid wall clock source\n");
    }

    return zx_time_add_duration(t, value);
}

zx_ticks_t ticks_per_second(void) {
    return tsc_ticks_per_ms * 1000;
}

zx_ticks_t current_ticks(void) {
    return rdtsc();
}

zx_time_t ticks_to_nanos(zx_ticks_t ticks) {
    return u64_mul_u64_fp32_64(ticks, ns_per_tsc);
}

// The PIT timer will keep track of wall time if we aren't using the TSC
static interrupt_eoi pit_timer_tick(void* arg) {
    pit_ticks += 1;
    return IRQ_EOI_DEACTIVATE;
}

// The APIC timers will call this when they fire
void platform_handle_apic_timer_tick(void) {
    timer_tick(current_time());
}

static void set_pit_frequency(uint32_t frequency) {
    uint32_t count, remainder;

    /* figure out the correct pit_divisor for the desired frequency */
    if (frequency <= 18) {
        count = 0xffff;
    } else if (frequency >= INTERNAL_FREQ) {
        count = 1;
    } else {
        count = INTERNAL_FREQ_3X / frequency;
        remainder = INTERNAL_FREQ_3X % frequency;

        if (remainder >= INTERNAL_FREQ_3X / 2) {
            count += 1;
        }

        count /= 3;
        remainder = count % 3;

        if (remainder >= 1) {
            count += 1;
        }
    }

    pit_divisor = count & 0xffff;

    /*
     * funky math that i don't feel like explaining. essentially 32.32 fixed
     * point representation of the configured timer delta.
     */
    fp_32_64_div_32_32(&us_per_pit, 1000 * 1000 * 3 * count, INTERNAL_FREQ_3X);

    // Add 1us to the PIT tick rate to deal with rounding
    ns_per_pit_rounded_up = (u32_mul_u64_fp32_64(1, us_per_pit) + 1) * 1000;

    //dprintf(DEBUG, "set_pit_frequency: pit_divisor=%04x\n", pit_divisor);

    /*
     * setup the Programmable Interval Timer
     * timer 0, mode 2, binary counter, LSB followed by MSB
     */
    outp(I8253_CONTROL_REG, 0x34);
    outp(I8253_DATA_REG, static_cast<uint8_t>(pit_divisor));      // LSB
    outp(I8253_DATA_REG, static_cast<uint8_t>(pit_divisor >> 8)); // MSB
}

static inline void pit_calibration_cycle_preamble(uint16_t ms) {
    // Make the PIT run for
    const uint16_t init_pic_count = static_cast<uint16_t>(INTERNAL_FREQ_TICKS_PER_MS * ms);
    // Program PIT in the interrupt on terminal count configuration,
    // this makes it count down and set the output high when it hits 0.
    outp(I8253_CONTROL_REG, 0x30);
    outp(I8253_DATA_REG, static_cast<uint8_t>(init_pic_count)); // LSB
}

static inline void pit_calibration_cycle(uint16_t ms) {
    // Make the PIT run for ms millis, see comments in the preamble
    const uint16_t init_pic_count = static_cast<uint16_t>(INTERNAL_FREQ_TICKS_PER_MS * ms);
    outp(I8253_DATA_REG, static_cast<uint8_t>(init_pic_count >> 8)); // MSB

    uint8_t status = 0;
    do {
        // Send a read-back command that latches the status of ch0
        outp(I8253_CONTROL_REG, 0xe2);
        status = inp(I8253_DATA_REG);
        // Wait for bit 7 (output) to go high and for bit 6 (null count) to go low
    } while ((status & 0xc0) != 0x80);
}

static inline void pit_calibration_cycle_cleanup(void) {
    // Stop the PIT by starting a mode change but not writing a counter
    outp(I8253_CONTROL_REG, 0x38);
}

static inline void hpet_calibration_cycle_preamble(void) {
    hpet_enable();
}

static inline void hpet_calibration_cycle(uint16_t ms) {
    hpet_wait_ms(ms);
}

static inline void hpet_calibration_cycle_cleanup(void) {
    hpet_disable();
}

static void calibrate_apic_timer(void) {
    ASSERT(arch_ints_disabled());

    const uint64_t apic_freq = x86_lookup_core_crystal_freq();
    if (apic_freq != 0) {
        ASSERT(apic_freq / 1000 <= UINT32_MAX);
        apic_ticks_per_ms = static_cast<uint32_t>(apic_freq / 1000);
        apic_divisor = 1;
        fp_32_64_div_32_32(&apic_ticks_per_ns, apic_ticks_per_ms, 1000 * 1000);
        printf("APIC frequency: %" PRIu32 " ticks/ms\n", apic_ticks_per_ms);
        return;
    }

    printf("Could not find APIC frequency: Calibrating APIC with %s\n",
           clock_name[calibration_clock]);

    apic_divisor = 1;
outer:
    while (apic_divisor != 0) {
        uint32_t best_time[2] = {UINT32_MAX, UINT32_MAX};
        const uint16_t duration_ms[2] = {2, 4};
        for (int trial = 0; trial < 2; ++trial) {
            for (int tries = 0; tries < 3; ++tries) {
                switch (calibration_clock) {
                case CLOCK_HPET:
                    hpet_calibration_cycle_preamble();
                    break;
                case CLOCK_PIT:
                    pit_calibration_cycle_preamble(duration_ms[trial]);
                    break;
                default:
                    PANIC_UNIMPLEMENTED;
                }

                // Setup APIC timer to count down with interrupt masked
                zx_status_t status = apic_timer_set_oneshot(
                    UINT32_MAX,
                    apic_divisor,
                    true);
                ASSERT(status == ZX_OK);

                switch (calibration_clock) {
                case CLOCK_HPET:
                    hpet_calibration_cycle(duration_ms[trial]);
                    break;
                case CLOCK_PIT:
                    pit_calibration_cycle(duration_ms[trial]);
                    break;
                default:
                    PANIC_UNIMPLEMENTED;
                }

                uint32_t apic_ticks = UINT32_MAX - apic_timer_current_count();
                if (apic_ticks < best_time[trial]) {
                    best_time[trial] = apic_ticks;
                }
                LTRACEF("Calibration trial %d found %u ticks/ms\n",
                        tries, apic_ticks);

                switch (calibration_clock) {
                case CLOCK_HPET:
                    hpet_calibration_cycle_cleanup();
                    break;
                case CLOCK_PIT:
                    pit_calibration_cycle_cleanup();
                    break;
                default:
                    PANIC_UNIMPLEMENTED;
                }
            }

            // If the APIC ran out of time every time, try again with a higher
            // divisor
            if (best_time[trial] == UINT32_MAX) {
                apic_divisor = static_cast<uint8_t>(apic_divisor * 2);
                goto outer;
            }
        }
        apic_ticks_per_ms = (best_time[1] - best_time[0]) / (duration_ms[1] - duration_ms[0]);
        fp_32_64_div_32_32(&apic_ticks_per_ns, apic_ticks_per_ms, 1000 * 1000);
        break;
    }
    ASSERT(apic_divisor != 0);

    printf("APIC timer calibrated: %" PRIu32 " ticks/ms, divisor %d\n",
           apic_ticks_per_ms, apic_divisor);
}

static uint64_t calibrate_tsc_count(uint16_t duration_ms) {
    uint64_t best_time = UINT64_MAX;

    for (int tries = 0; tries < 3; ++tries) {
        switch (calibration_clock) {
        case CLOCK_HPET:
            hpet_calibration_cycle_preamble();
            break;
        case CLOCK_PIT:
            pit_calibration_cycle_preamble(duration_ms);
            break;
        default:
            PANIC_UNIMPLEMENTED;
        }

        // Use CPUID to serialize the instruction stream
        uint32_t _ignored;
        cpuid(0, &_ignored, &_ignored, &_ignored, &_ignored);
        uint64_t start = rdtsc();
        cpuid(0, &_ignored, &_ignored, &_ignored, &_ignored);

        switch (calibration_clock) {
        case CLOCK_HPET:
            hpet_calibration_cycle(duration_ms);
            break;
        case CLOCK_PIT:
            pit_calibration_cycle(duration_ms);
            break;
        default:
            PANIC_UNIMPLEMENTED;
        }

        cpuid(0, &_ignored, &_ignored, &_ignored, &_ignored);
        zx_ticks_t end = rdtsc();
        cpuid(0, &_ignored, &_ignored, &_ignored, &_ignored);

        zx_ticks_t tsc_ticks = end - start;
        if (tsc_ticks < best_time) {
            best_time = tsc_ticks;
        }
        LTRACEF("Calibration trial %d found %" PRIu64 " ticks/ms\n",
                tries, tsc_ticks);
        switch (calibration_clock) {
        case CLOCK_HPET:
            hpet_calibration_cycle_cleanup();
            break;
        case CLOCK_PIT:
            pit_calibration_cycle_cleanup();
            break;
        default:
            PANIC_UNIMPLEMENTED;
        }
    }

    return best_time;
}

static void calibrate_tsc(bool has_pvclock) {
    ASSERT(arch_ints_disabled());

    const uint64_t tsc_freq = has_pvclock ? pvclock_get_tsc_freq() : x86_lookup_tsc_freq();
    if (tsc_freq != 0) {
        tsc_ticks_per_ms = tsc_freq / 1000;
        printf("TSC frequency: %" PRIu64 " ticks/ms\n", tsc_ticks_per_ms);
    } else {
        printf("Could not find TSC frequency: Calibrating TSC with %s\n",
               clock_name[calibration_clock]);

        uint32_t duration_ms[2] = {2, 4};
        uint64_t best_time[2] = {
            calibrate_tsc_count(static_cast<uint16_t>(duration_ms[0])),
            calibrate_tsc_count(static_cast<uint16_t>(duration_ms[1]))};

        while (best_time[0] >= best_time[1] && 2 * duration_ms[1] < MAX_TIMER_INTERVAL) {
            duration_ms[0] = duration_ms[1];
            duration_ms[1] *= 2;
            best_time[0] = best_time[1];
            best_time[1] = calibrate_tsc_count(static_cast<uint16_t>(duration_ms[1]));
        }

        ASSERT(best_time[0] < best_time[1]);

        tsc_ticks_per_ms = (best_time[1] - best_time[0]) / (duration_ms[1] - duration_ms[0]);

        printf("TSC calibrated: %" PRIu64 " ticks/ms\n", tsc_ticks_per_ms);
    }

    ASSERT(tsc_ticks_per_ms <= UINT32_MAX);
    fp_32_64_div_32_32(&ns_per_tsc, 1000 * 1000, static_cast<uint32_t>(tsc_ticks_per_ms));
    fp_32_64_div_32_32(&tsc_per_ns, static_cast<uint32_t>(tsc_ticks_per_ms), 1000 * 1000);
    // Add 1ns to conservatively deal with rounding
    ns_per_tsc_rounded_up = u32_mul_u64_fp32_64(1, ns_per_tsc) + 1;

    LTRACEF("ns_per_tsc: %08x.%08x%08x\n", ns_per_tsc.l0, ns_per_tsc.l32, ns_per_tsc.l64);
}

static void pc_init_timer(uint level) {
    const struct x86_model_info* cpu_model = x86_get_model();

    constant_tsc = false;
    if (x86_vendor == X86_VENDOR_INTEL) {
        /* This condition taken from Intel 3B 17.15 (Time-Stamp Counter).  This
         * is the negation of the non-Constant TSC section, since the Constant
         * TSC section is incomplete (the behavior is architectural going
         * forward, and modern CPUs are not on the list). */
        constant_tsc = !((cpu_model->family == 0x6 && cpu_model->model == 0x9) ||
                         (cpu_model->family == 0x6 && cpu_model->model == 0xd) ||
                         (cpu_model->family == 0xf && cpu_model->model < 0x3));
    }
    invariant_tsc = x86_feature_test(X86_FEATURE_INVAR_TSC);

    bool has_pvclock = pvclock_is_present();
    if (has_pvclock) {
        zx_status_t status = pvclock_init();
        if (status == ZX_OK) {
            invariant_tsc = pvclock_is_stable();
        } else {
            has_pvclock = false;
        }
    }

    bool has_hpet = hpet_is_present();
    if (has_hpet) {
        calibration_clock = CLOCK_HPET;
        const uint64_t hpet_ms_rate = hpet_ticks_per_ms();
        ASSERT(hpet_ms_rate <= UINT32_MAX);
        printf("HPET frequency: %" PRIu64 " ticks/ms\n", hpet_ms_rate);
        fp_32_64_div_32_32(&ns_per_hpet, 1000 * 1000, static_cast<uint32_t>(hpet_ms_rate));
        // Add 1ns to conservatively deal with rounding
        ns_per_hpet_rounded_up = u32_mul_u64_fp32_64(1, ns_per_hpet) + 1;
    } else {
        calibration_clock = CLOCK_PIT;
    }

    const char* force_wallclock = cmdline_get("kernel.wallclock");
    bool use_invariant_tsc = invariant_tsc && (!force_wallclock || !strcmp(force_wallclock, "tsc"));

    use_tsc_deadline = use_invariant_tsc &&
                       x86_feature_test(X86_FEATURE_TSC_DEADLINE);
    if (!use_tsc_deadline) {
        calibrate_apic_timer();
    }

    if (use_invariant_tsc) {
        calibrate_tsc(has_pvclock);

        // Program PIT in the software strobe configuration, but do not load
        // the count.  This will pause the PIT.
        outp(I8253_CONTROL_REG, 0x38);
        wall_clock = CLOCK_TSC;
    } else {
        if (constant_tsc || invariant_tsc) {
            // Calibrate the TSC even though it's not as good as we want, so we
            // can still let folks still use it for cheap timing.
            calibrate_tsc(has_pvclock);
        }

        if (has_hpet && (!force_wallclock || !strcmp(force_wallclock, "hpet"))) {
            wall_clock = CLOCK_HPET;
            hpet_set_value(0);
            hpet_enable();
        } else {
            if (force_wallclock && strcmp(force_wallclock, "pit")) {
                panic("Could not satisfy kernel.wallclock choice\n");
            }

            wall_clock = CLOCK_PIT;

            set_pit_frequency(1000); // ~1ms granularity

            uint32_t irq = apic_io_isa_to_global(ISA_IRQ_PIT);
            zx_status_t status = register_int_handler(irq, &pit_timer_tick, NULL);
            DEBUG_ASSERT(status == ZX_OK);
            unmask_interrupt(irq);
        }
    }

    printf("timer features: constant_tsc %d invariant_tsc %d tsc_deadline %d\n",
           constant_tsc, invariant_tsc, use_tsc_deadline);
    printf("Using %s as wallclock\n", clock_name[wall_clock]);
}
LK_INIT_HOOK(timer, &pc_init_timer, LK_INIT_LEVEL_VM + 3);

zx_status_t platform_set_oneshot_timer(zx_time_t deadline) {
    DEBUG_ASSERT(arch_ints_disabled());

    if (deadline < 0) {
        deadline = 0;
    }
    deadline = discrete_time_roundup(deadline);
    DEBUG_ASSERT(deadline > 0);

    if (use_tsc_deadline) {
        // Check if the deadline would overflow the TSC.
        const uint64_t tsc_ticks_per_ns = tsc_ticks_per_ms / ZX_MSEC(1);
        if (UINT64_MAX / deadline < tsc_ticks_per_ns) {
            return ZX_ERR_INVALID_ARGS;
        }

        // We rounded up to the tick after above.
        const uint64_t tsc_deadline = u64_mul_u64_fp32_64(deadline, tsc_per_ns);
        LTRACEF("Scheduling oneshot timer: %" PRIu64 " deadline\n", tsc_deadline);
        apic_timer_set_tsc_deadline(tsc_deadline, false /* unmasked */);
        return ZX_OK;
    }

    const zx_time_t now = current_time();
    if (now >= deadline) {
        // Deadline has already passed. We still need to schedule a timer so that
        // the interrupt fires.
        LTRACEF("Scheduling oneshot timer for min duration\n");
        return apic_timer_set_oneshot(1, 1, false /* unmasked */);
    }
    const zx_duration_t interval = zx_time_sub_time(deadline, now);
    DEBUG_ASSERT(interval > 0);

    uint64_t apic_ticks_needed = u64_mul_u64_fp32_64(interval, apic_ticks_per_ns);
    if (apic_ticks_needed == 0) {
        apic_ticks_needed = 1;
    }

    // Find the shift needed for this timeout, since count is 32-bit.
    const uint highest_set_bit = log2_ulong_floor(apic_ticks_needed);
    uint8_t extra_shift = (highest_set_bit <= 31) ? 0 : static_cast<uint8_t>(highest_set_bit - 31);
    if (extra_shift > 8) {
        extra_shift = 8;
    }

    uint32_t divisor = apic_divisor << extra_shift;
    uint32_t count;
    // If the divisor is too large, we're at our maximum timeout.  Saturate the
    // timer.  It'll fire earlier than requested, but the scheduler will notice
    // and ask us to set the timer up again.
    if (divisor <= 128) {
        count = (uint32_t)(apic_ticks_needed >> extra_shift);
        DEBUG_ASSERT((apic_ticks_needed >> extra_shift) <= UINT32_MAX);
    } else {
        divisor = 128;
        count = UINT32_MAX;
    }

    // Make sure we're not underflowing
    if (count == 0) {
        DEBUG_ASSERT(divisor == 1);
        count = 1;
    }

    LTRACEF("Scheduling oneshot timer: %u count, %u div\n", count, divisor);
    return apic_timer_set_oneshot(count, static_cast<uint8_t>(divisor), false /* unmasked */);
}

void platform_stop_timer(void) {
    /* Enable interrupt mode that will stop the decreasing counter of the PIT */
    //outp(I8253_CONTROL_REG, 0x30);
    apic_timer_stop();
}

void platform_shutdown_timer(void) {
    DEBUG_ASSERT(arch_ints_disabled());

    // TODO(maniscalco): What should we do here?  Anything?
}

static uint64_t saved_hpet_val;
void pc_prep_suspend_timer(void) {
    if (hpet_is_present()) {
        saved_hpet_val = hpet_get_value();
    }
}

void pc_resume_timer(void) {
    switch (wall_clock) {
    case CLOCK_HPET:
        hpet_set_value(saved_hpet_val);
        hpet_enable();
        break;
    case CLOCK_PIT: {
        set_pit_frequency(1000); // ~1ms granularity

        uint32_t irq = apic_io_isa_to_global(ISA_IRQ_PIT);
        unmask_interrupt(irq);
        break;
    }
    default:
        break;
    }
}