Add sdio support for s905d2 and vim2
Change-Id: Id9a7964a32d0bade181a37b9276d7dbedd04dbbe
diff --git a/system/dev/board/aml-s905d2/aml-sdio.c b/system/dev/board/aml-s905d2/aml-sdio.c
new file mode 100644
index 0000000..4262403
--- /dev/null
+++ b/system/dev/board/aml-s905d2/aml-sdio.c
@@ -0,0 +1,84 @@
+// Copyright 2018 The Fuchsia Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+#include <ddk/debug.h>
+#include <ddk/protocol/platform-defs.h>
+#include <hw/reg.h>
+
+#include <soc/aml-common/aml-usb-phy-v2.h>
+#include <soc/aml-s905d2/s905d2-gpio.h>
+#include <soc/aml-s905d2/s905d2-hw.h>
+
+#include "aml.h"
+
+#define BIT_MASK(start, count) (((1 << (count)) - 1) << (start))
+#define SET_BITS(dest, start, count, value) \
+ ((dest & ~BIT_MASK(start, count)) | (((value) << (start)) & BIT_MASK(start, count)))
+
+static const pbus_mmio_t sdio_mmios[] = {
+ {
+ .base = S905D2_EMMC_A_SDIO_BASE,
+ .length = S905D2_EMMC_A_SDIO_LENGTH,
+ },
+
+ {
+ .base = S905D2_CBUS_BASE,
+ .length = S905D2_CBUS_LENGTH,
+ }
+};
+
+static const pbus_irq_t sdio_irqs[] = {
+ {
+ .irq = S905D2_EMMC_A_SDIO_IRQ,
+ },
+};
+
+static const pbus_bti_t sdio_btis[] = {
+ {
+ .iommu_index = 0,
+ .bti_id = BTI_SDIO,
+ },
+};
+
+static const pbus_gpio_t sdio_gpios[] = {
+ {
+ .gpio = S905D2_GPIOX(6),
+ },
+};
+
+static const pbus_dev_t sdio_dev = {
+ .name = "aml_sdio",
+ .vid = PDEV_VID_AMLOGIC,
+ .pid = PDEV_PID_GENERIC,
+ .did = PDEV_DID_AMLOGIC_SD_EMMC,
+ .mmios = sdio_mmios,
+ .mmio_count = countof(sdio_mmios),
+ .irqs = sdio_irqs,
+ .irq_count = countof(sdio_irqs),
+ .btis = sdio_btis,
+ .bti_count = countof(sdio_btis),
+ .gpios = sdio_gpios,
+ .gpio_count = countof(sdio_gpios),
+
+};
+
+zx_status_t aml_sdio_init(aml_bus_t* bus) {
+ zx_status_t status;
+
+ // set alternate functions to enable EMMC
+ zxlogf(INFO, "aml_sdio_init START\n");
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_D0, S905D2_WIFI_SDIO_D0_FN);
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_D1, S905D2_WIFI_SDIO_D1_FN);
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_D2, S905D2_WIFI_SDIO_D2_FN);
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_D3, S905D2_WIFI_SDIO_D3_FN);
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_CLK, S905D2_WIFI_SDIO_CLK_FN);
+ gpio_set_alt_function(&bus->gpio, S905D2_WIFI_SDIO_CMD, S905D2_WIFI_SDIO_CMD_FN);
+
+ if ((status = pbus_device_add(&bus->pbus, &sdio_dev, 0)) != ZX_OK) {
+ zxlogf(ERROR, "aml_sdio_init could not add sdio_dev: %d\n", status);
+ return status;
+ }
+
+ return ZX_OK;
+}
diff --git a/system/dev/board/vim/vim-sdio.c b/system/dev/board/vim/vim-sdio.c
new file mode 100644
index 0000000..9081a49
--- /dev/null
+++ b/system/dev/board/vim/vim-sdio.c
@@ -0,0 +1,91 @@
+// Copyright 2018 The Fuchsia Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+#include <ddk/debug.h>
+#include <ddk/metadata.h>
+#include <ddk/protocol/platform-defs.h>
+#include <hw/reg.h>
+#include <soc/aml-s912/s912-hw.h>
+#include <soc/aml-a113/a113-hw.h>
+#include <soc/aml-s912/s912-gpio.h>
+
+#include "vim.h"
+
+#define BIT_MASK(start, count) (((1 << (count)) - 1) << (start))
+#define SET_BITS(dest, start, count, value) \
+ ((dest & ~BIT_MASK(start, count)) | (((value) << (start)) & BIT_MASK(start, count)))
+
+
+/*static const pbus_mmio_t sd_mmios[] = {
+ {
+ .base = 0xD0072000,
+ .length = 0x2000,
+ }
+};*/
+
+/*static const pbus_irq_t sd_irqs[] = {
+ {
+ .irq = 249,
+ },
+};*/
+
+static const pbus_mmio_t sdio_mmios[] = {
+ {
+ .base = 0xD0070000,
+ .length = 0x2000,
+ }
+};
+
+static const pbus_irq_t sdio_irqs[] = {
+ {
+ .irq = 248,
+ },
+};
+
+static const pbus_bti_t sdio_btis[] = {
+ {
+ .iommu_index = 0,
+ .bti_id = BTI_SDIO,
+ },
+};
+
+static const pbus_gpio_t sdio_gpios[] = {
+ {
+ .gpio = S912_GPIOX(6),
+ },
+};
+
+static const pbus_dev_t sdio_dev = {
+ .name = "vim_sdio",
+ .vid = PDEV_VID_AMLOGIC,
+ .pid = PDEV_PID_GENERIC,
+ .did = PDEV_DID_AMLOGIC_SD_EMMC,
+ .mmios = sdio_mmios,
+ .mmio_count = countof(sdio_mmios),
+ .irqs = sdio_irqs,
+ .irq_count = countof(sdio_irqs),
+ .btis = sdio_btis,
+ .bti_count = countof(sdio_btis),
+ .gpios = sdio_gpios,
+ .gpio_count = countof(sdio_gpios),
+};
+
+zx_status_t vim_sdio_init(vim_bus_t* bus) {
+ zx_status_t status;
+
+ // set alternate functions to enable EMMC
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_D0, S912_WIFI_SDIO_D0_FN);
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_D1, S912_WIFI_SDIO_D1_FN);
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_D2, S912_WIFI_SDIO_D2_FN);
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_D3, S912_WIFI_SDIO_D3_FN);
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_CLK, S912_WIFI_SDIO_CLK_FN);
+ gpio_set_alt_function(&bus->gpio, S912_WIFI_SDIO_CMD, S912_WIFI_SDIO_CMD_FN);
+
+ if ((status = pbus_device_add(&bus->pbus, &sdio_dev, 0)) != ZX_OK) {
+ zxlogf(ERROR, "vim_sd_emmc_init could not add emmc_dev: %d\n", status);
+ return status;
+ }
+
+ return ZX_OK;
+}
