// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#pragma once

#include <threads.h>

#include <ddk/device.h>
#include <ddk/protocol/gpio.h>
#include <ddk/protocol/i2c.h>
#include <ddk/protocol/test.h>
#include <ddktl/device.h>
#include <ddktl/protocol/hidbus.h>
#include <ddktl/protocol/test.h>
#include <fbl/mutex.h>
#include <fbl/unique_ptr.h>
#include <hid/ft3x27.h>

#include <lib/zx/interrupt.h>
#include <zircon/compiler.h>
#include <zircon/types.h>

enum {
    FT_INT_PIN,
    FT_RESET_PIN,
    FT_PIN_COUNT,
};

// clang-format off
#define FTS_REG_CURPOINT                    0x02
#define FTS_REG_FINGER_START                0x03
#define FTS_REG_INT_CNT                     0x8F
#define FTS_REG_FLOW_WORK_CNT               0x91
#define FTS_REG_WORKMODE                    0x00
#define FTS_REG_WORKMODE_FACTORY_VALUE      0x40
#define FTS_REG_WORKMODE_WORK_VALUE         0x00
#define FTS_REG_ESDCHECK_DISABLE            0x8D
#define FTS_REG_CHIP_ID                     0xA3
#define FTS_REG_CHIP_ID2                    0x9F
#define FTS_REG_POWER_MODE                  0xA5
#define FTS_REG_POWER_MODE_SLEEP_VALUE      0x03
#define FTS_REG_FW_VER                      0xA6
#define FTS_REG_VENDOR_ID                   0xA8
#define FTS_REG_LCD_BUSY_NUM                0xAB
#define FTS_REG_FACE_DEC_MODE_EN            0xB0
#define FTS_REG_FACE_DEC_MODE_STATUS        0x01
#define FTS_REG_IDE_PARA_VER_ID             0xB5
#define FTS_REG_IDE_PARA_STATUS             0xB6
#define FTS_REG_GLOVE_MODE_EN               0xC0
#define FTS_REG_COVER_MODE_EN               0xC1
#define FTS_REG_CHARGER_MODE_EN             0x8B
#define FTS_REG_GESTURE_EN                  0xD0
#define FTS_REG_GESTURE_OUTPUT_ADDRESS      0xD3
#define FTS_REG_MODULE_ID                   0xE3
#define FTS_REG_LIC_VER                     0xE4
#define FTS_REG_ESD_SATURATE                0xED
// clang-format on

namespace ft {
class Ft3x27Device : public ddk::Device<Ft3x27Device, ddk::Unbindable>,
                     public ddk::HidbusProtocol<Ft3x27Device> {
public:
    Ft3x27Device(zx_device_t* device);

    static zx_status_t Create(zx_device_t* device);

    void DdkRelease();
    void DdkUnbind() __TA_EXCLUDES(proxy_lock_);

    // Hidbus required methods
    void HidbusStop();
    zx_status_t HidbusGetDescriptor(uint8_t desc_type, void** data, size_t* len);
    zx_status_t HidbusGetReport(uint8_t rpt_type, uint8_t rpt_id, void* data,
                                size_t len, size_t* out_len);
    zx_status_t HidbusSetReport(uint8_t rpt_type, uint8_t rpt_id, const void* data,
                                size_t len);
    zx_status_t HidbusGetIdle(uint8_t rpt_id, uint8_t* duration);
    zx_status_t HidbusSetIdle(uint8_t rpt_id, uint8_t duration);
    zx_status_t HidbusGetProtocol(uint8_t* protocol);
    zx_status_t HidbusSetProtocol(uint8_t protocol);
    zx_status_t HidbusStart(const hidbus_ifc_t* ifc) __TA_EXCLUDES(proxy_lock_);
    zx_status_t HidbusQuery(uint32_t options, hid_info_t* info) __TA_EXCLUDES(proxy_lock_);

private:
    /* Note: the ft3x27 device is connected via i2c and is NOT a HID
        device.  This driver reads a collection of data from the data and
        parses it into a message which will be sent up the stack.  This message
        complies with a HID descriptor that manually scripted (i.e. - not
        reported by the device iteself).
    */
    // Number of touch points this device can report simultaneously
    static constexpr uint32_t kMaxPoints = 5;
    // Size of each individual touch record (note: there are kMaxPoints of
    //  them) on the i2c bus.  This is not the HID report size.
    static constexpr uint32_t kFingerRptSize = 6;

    zx_status_t InitPdev();
    zx_status_t ShutDown() __TA_EXCLUDES(proxy_lock_);

    uint8_t Read(uint8_t addr);
    zx_status_t Read(uint8_t addr, uint8_t* buf, uint8_t len);

    int Thread();

    ft3x27_touch_t ft_rpt_ __TA_GUARDED(proxy_lock_);
    void ParseReport(ft3x27_finger_t* rpt, uint8_t* buf);

    gpio_protocol_t gpios_[FT_PIN_COUNT];
    zx::interrupt irq_;
    i2c_protocol_t i2c_;

    thrd_t thread_;
    fbl::atomic<bool> running_;

    fbl::Mutex proxy_lock_;
    ddk::HidbusIfcProxy proxy_ __TA_GUARDED(proxy_lock_);
};
}