| // Copyright 2018 The Fuchsia Authors. All rights reserved. | |
| // Use of this source code is governed by a BSD-style license that can be | |
| // found in the LICENSE file. | |
| #include <ddk/debug.h> | |
| #include <ddk/device.h> | |
| #include <ddk/platform-defs.h> | |
| #include <soc/aml-s905d2/s905d2-gpio.h> | |
| #include <soc/aml-s905d2/s905d2-hw.h> | |
| #include <limits.h> | |
| #include "astro.h" | |
| static const pbus_mmio_t i2c_mmios[] = { | |
| { | |
| .base = S905D2_I2C_AO_0_BASE, | |
| .length = 0x20, | |
| }, | |
| { | |
| .base = S905D2_I2C2_BASE, | |
| .length = 0x20, | |
| }, | |
| { | |
| .base = S905D2_I2C3_BASE, | |
| .length = 0x20, | |
| }, | |
| }; | |
| static const pbus_irq_t i2c_irqs[] = { | |
| { | |
| .irq = S905D2_I2C_AO_0_IRQ, | |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, | |
| }, | |
| { | |
| .irq = S905D2_I2C2_IRQ, | |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, | |
| }, | |
| { | |
| .irq = S905D2_I2C3_IRQ, | |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, | |
| }, | |
| }; | |
| static const pbus_dev_t i2c_dev = { | |
| .name = "i2c", | |
| .vid = PDEV_VID_AMLOGIC, | |
| .pid = PDEV_PID_GENERIC, | |
| .did = PDEV_DID_AMLOGIC_I2C, | |
| .mmio_list = i2c_mmios, | |
| .mmio_count = countof(i2c_mmios), | |
| .irq_list = i2c_irqs, | |
| .irq_count = countof(i2c_irqs), | |
| }; | |
| zx_status_t aml_i2c_init(aml_bus_t* bus) { | |
| // setup pinmux for our I2C busses | |
| //i2c_ao_0 | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOAO(2), 1); | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOAO(3), 1); | |
| //i2c2 | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOZ(14), 3); | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOZ(15), 3); | |
| //i2c3 | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOA(14), 2); | |
| gpio_impl_set_alt_function(&bus->gpio, S905D2_GPIOA(15), 2); | |
| zx_status_t status = pbus_protocol_device_add(&bus->pbus, ZX_PROTOCOL_I2C_IMPL, &i2c_dev); | |
| if (status != ZX_OK) { | |
| zxlogf(ERROR, "aml_i2c_init: pbus_protocol_device_add failed: %d\n", status); | |
| return status; | |
| } | |
| return ZX_OK; | |
| } |