# -------------------------------------------------
# drawElements Quality Program OpenGL ES 3.2 Module
# -------------------------------------------------
#
# Copyright 2016 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


group varying "Varying linkage"
	group rules "Rules"

		case type_mismatch
			version 320 es
			desc "Tessellation output and geometry input type mismatch"
			expect link_fail
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float te_out;
				void main()
				{
					te_out = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in mediump vec2 te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx].y;
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case different_precision
			version 320 es
			desc "Tessellation output and geometry input precisions are different"
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float te_out;
				void main()
				{
					te_out = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in highp float te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx];
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case no_output_declaration
			version 320 es
			desc "Geometry input has no matching output"
			expect link_fail
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float te_out;
				void main()
				{
					te_out = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in mediump float te_out[];
				in mediump float te_out_nonexistent[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx] + te_out_nonexistent[ndx];
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case superfluous_output_declaration
			version 320 es
			desc "Tessellation shader output is never used"
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float te_out;
				out mediump float te_out_nonexistent;
				void main()
				{
					te_out = tc_out[2];
					te_out_nonexistent = tc_out[0];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in mediump float te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx];
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case vertex_geometry_same_varying_name_1
			version 320 es
			desc "Vertex output and geometry input share the same name"
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float sharedVaringName;
				void main()
				{
					sharedVaringName = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float sharedVaringName[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = sharedVaringName[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float sharedVaringName;
				void main()
				{
					sharedVaringName = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in mediump float sharedVaringName[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = sharedVaringName[ndx];
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case vertex_geometry_same_varying_name_2
			version 320 es
			desc "Vertex output and geometry input share the same name"
			values
			{
				input vec2 in0 = vec2(1.0, 1.0);
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump vec2 sharedVaringName;
				void main()
				{
					sharedVaringName = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump vec2 sharedVaringName[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = 2.0 * sharedVaringName[gl_InvocationID].x - sharedVaringName[gl_InvocationID].y;
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out mediump float sharedVaringName;
				void main()
				{
					sharedVaringName = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in mediump float sharedVaringName[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = sharedVaringName[ndx];
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case io_block
			version 320 es
			desc "Use of io block between tessellation and geometry shaders"
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out IOBlockName { mediump float val; } instanceName;
				void main()
				{
					instanceName.val = tc_out[2];
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in IOBlockName { mediump float val; } instanceName[];
				out mediump float geo_out;
				void main()
				{
					geo_out = instanceName[0].val;
					gl_Position = gl_in[0].gl_Position;
					EmitVertex();

					geo_out = instanceName[1].val;
					gl_Position = gl_in[1].gl_Position;
					EmitVertex();

					geo_out = instanceName[2].val;
					gl_Position = gl_in[2].gl_Position;
					EmitVertex();
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end

		case array_in_io_block
			version 320 es
			desc "Float array in a io block between tessellation and geometry shaders"
			values
			{
				input float in0 = 1.0;
				output float out0 = 1.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				out mediump float vtx_out;
				void main()
				{
					vtx_out = in0;
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				in mediump float vtx_out[];
				out mediump float tc_out[];
				void main()
				{
					tc_out[gl_InvocationID] = vtx_out[gl_InvocationID];
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				in mediump float tc_out[];
				out IOBlockName { mediump float val[2]; } instanceName;
				void main()
				{
					instanceName.val[0] = tc_out[2] + 1.0;
					instanceName.val[1] = -1.0;
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				in IOBlockName { mediump float val[2]; } instanceName[];
				out mediump float geo_out;
				void main()
				{
					geo_out = instanceName[0].val[0] + instanceName[0].val[1];
					gl_Position = gl_in[0].gl_Position;
					EmitVertex();

					geo_out = instanceName[1].val[0] + instanceName[1].val[1];
					gl_Position = gl_in[1].gl_Position;
					EmitVertex();

					geo_out = instanceName[2].val[0] + instanceName[2].val[1];
					gl_Position = gl_in[2].gl_Position;
					EmitVertex();
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end
	end

	import "linkage_tessellation_geometry_varying_types.test"
end

group uniform "Uniform linkage"
	group rules "Rules"
		case type_mismatch_1
			version 320 es
			desc "Uniform type mismatch"
			expect link_fail
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				void main()
				{
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				void main()
				{
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				uniform mediump float u_value;
				out mediump float te_out;
				void main()
				{
					te_out = u_value;
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				uniform mediump vec2 u_value;
				in mediump float te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx] + u_value.y;
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					${FRAG_COLOR} = vec4(geo_out);
				}
			""
		end

		case precision_mismatch_1
			version 320 es
			desc "Uniform precision mismatch"
			expect link_fail
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				void main()
				{
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				void main()
				{
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				uniform mediump float u_value;
				out mediump float te_out;
				void main()
				{
					te_out = u_value;
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				uniform highp float u_value;
				in mediump float te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx] + u_value;
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					${FRAG_COLOR} = vec4(geo_out);
				}
			""
		end

		case struct_partial_usage
			version 320 es
			desc "Uniform precision mismatch"
			values
			{
				uniform float u_value.teVal = 1.0;
				uniform float u_value.geoVal = 2.0;
				output float out0 = 5.0;
			}
			vertex ""
				#version 320 es
				${VERTEX_DECLARATIONS}
				void main()
				{
					${VERTEX_OUTPUT}
				}
			""
			tessellation_control ""
				#version 320 es
				${TESSELLATION_CONTROL_DECLARATIONS}
				void main()
				{
					${TESSELLATION_CONTROL_OUTPUT}
				}
			""
			tessellation_evaluation ""
				#version 320 es
				${TESSELLATION_EVALUATION_DECLARATIONS}
				struct S
				{
					mediump float teVal;
					mediump float geoVal;
				};
				uniform S u_value;
				out mediump float te_out;
				void main()
				{
					te_out = u_value.teVal;
					${TESSELLATION_EVALUATION_OUTPUT}
				}
			""
			geometry ""
				#version 320 es
				${GEOMETRY_DECLARATIONS}
				struct S
				{
					mediump float teVal;
					mediump float geoVal;
				};
				uniform S u_value;
				in mediump float te_out[];
				out mediump float geo_out;
				void main()
				{
					for (int ndx = 0; ndx < gl_in.length(); ++ndx)
					{
						geo_out = te_out[ndx] + 2.0 * u_value.geoVal;
						gl_Position = gl_in[ndx].gl_Position;
						EmitVertex();
					}
				}
			""
			fragment ""
				#version 320 es
				precision mediump float;
				${FRAGMENT_DECLARATIONS}
				in mediump float geo_out;
				void main()
				{
					out0 = geo_out;
					${FRAGMENT_OUTPUT}
				}
			""
		end
	end
end