<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>SWIG and Lua</title>
<link rel="stylesheet" type="text/css" href="style.css">
</head>

<body bgcolor="#ffffff">
<H1><a name="Lua_nn1"></a>22 SWIG and Lua</H1>
<!-- INDEX -->
<div class="sectiontoc">
<ul>
<li><a href="#Lua_nn2">Preliminaries</a>
<li><a href="#Lua_nn3">Running SWIG</a>
<ul>
<li><a href="#Lua_nn4">Compiling and Linking and Interpreter</a>
<li><a href="#Lua_nn5">Compiling a dynamic module</a>
<li><a href="#Lua_nn6">Using your module</a>
</ul>
<li><a href="#Lua_nn7">A tour of basic C/C++ wrapping</a>
<ul>
<li><a href="#Lua_nn8">Modules</a>
<li><a href="#Lua_nn9">Functions</a>
<li><a href="#Lua_nn10">Global variables</a>
<li><a href="#Lua_nn11">Constants and enums</a>
<li><a href="#Lua_nn12">Pointers</a>
<li><a href="#Lua_nn13">Structures</a>
<li><a href="#Lua_nn14">C++ classes</a>
<li><a href="#Lua_nn15">C++ inheritance</a>
<li><a href="#Lua_nn16">Pointers, references, values, and arrays</a>
<li><a href="#Lua_nn17">C++ overloaded functions</a>
<li><a href="#Lua_nn18">C++ operators</a>
<li><a href="#Lua_nn19">Class extension with %extend</a>
<li><a href="#Lua_nn20">C++ templates</a>
<li><a href="#Lua_nn21">C++ Smart Pointers</a>
<li><a href="#Lua_nn22">C++ Exceptions</a>
<li><a href="#Lua_nn23">Writing your own custom wrappers</a>
<li><a href="#Lua_nn24">Adding additional Lua code</a>
</ul>
<li><a href="#Lua_nn25">Details on the Lua binding</a>
<ul>
<li><a href="#Lua_nn26">Binding global data into the module.</a>
<li><a href="#Lua_nn27">Userdata and Metatables</a>
<li><a href="#Lua_nn28">Memory management</a>
</ul>
</ul>
</div>
<!-- INDEX -->


<p>
Lua is an extension programming language designed to support general procedural programming with data description facilities. It also offers good support for object-oriented programming, functional programming, and data-driven programming. Lua is intended to be used as a powerful, light-weight configuration language for any program that needs one. Lua is implemented as a library, written in clean C (that is, in the common subset of ANSI C and C++). Its also a <em>really</em> tiny language, less than 6000 lines of code, which compiles to &lt;100 kilobytes of binary code. It can be found at <a href="http://www.lua.org">http://www.lua.org</a>
</p>
<H2><a name="Lua_nn2"></a>22.1 Preliminaries</H2>


<p>
The current SWIG implementation is designed to work with Lua 5.0.x and Lua 5.1.x. It should work with later versions of Lua, but certainly not with Lua 4.0 due to substantial API changes. ((Currently SWIG generated code has only been tested on Windows with MingW, though given the nature of Lua, is should not have problems on other OS's)). It is possible to either static link or dynamic link a Lua module into the interpreter (normally Lua static links its libraries, as dynamic linking is not available on all platforms).
</p>
<H2><a name="Lua_nn3"></a>22.2 Running SWIG</H2>


<p>
Suppose that you defined a SWIG module such as the following:
</p>
<div class="code"><pre>
%module example
%{
#include "example.h"
%}
int gcd(int x, int y);
extern double Foo;
</pre></div>
<p>
To build a Lua module, run SWIG using the <tt>-lua</tt> option.
</p>
<div class="shell"><pre>
$ swig -lua example.i
</pre></div>
<p>
If building a C++ extension, add the <tt>-c++</tt> option:
</p>
<div class="shell"><pre>
$ swig -c++ -lua example.i
</pre></div>
<p>
This creates a C/C++ source file <tt>example_wrap.c</tt> or <tt>example_wrap.cxx</tt>. The generated C source file contains the low-level wrappers that need to be compiled and linked with the rest of your C/C++ application to create an extension module.
</p>
<p>
The name of the wrapper file is derived from the name of the input file. For example, if the input file is <tt>example.i</tt>, the name of the wrapper file is <tt>example_wrap.c</tt>. To change this, you can use the -o option. The wrappered module will export one function <tt>"int luaopen_example(lua_State* L)"</tt> which must be called to register the module with the Lua interpreter. The name "luaopen_example" depends upon the name of the module.
</p>
<H3><a name="Lua_nn4"></a>22.2.1 Compiling and Linking and Interpreter</H3>


<p>
Normally Lua is embedded into another program and will be statically linked. An extremely simple stand-alone interpreter (<tt>min.c</tt>) is given below:
</p>
<div class="code"><pre>
#include &lt;stdio.h&gt;
#include "lua.h"
#include "lualib.h"
#include "lauxlib.h"

extern int luaopen_example(lua_State* L); // declare the wrapped module

int main(int argc,char* argv[])
{
 lua_State *L;
 if (argc&lt;2)
 {
  printf("%s: &lt;filename.lua&gt;\n",argv[0]);
  return 0;
 }
 L=lua_open();
 luaopen_base(L);	// load basic libs (eg. print)
 luaopen_example(L);	// load the wrappered module
 if (luaL_loadfile(L,argv[1])==0) // load and run the file
  lua_pcall(L,0,0,0);
 else
  printf("unable to load %s\n",argv[1]);
 lua_close(L);
 return 0;
}
</pre></div>
<p>
A much improved set of code can be found in the Lua distribution <tt>src/lua/lua.c</tt>. Include your module, just add the external declaration &amp; add a <tt>#define LUA_EXTRALIBS {"example",luaopen_example}</tt>, at the relevant place.
</p>
<p>
The exact commands for compiling and linking vary from platform to platform. Here is a possible set of commands of doing this:
</p>
<div class="shell"><pre>
$ swig -lua example.i -o example_wrap.c
$ gcc -I/usr/include/lua -c min.c -o min.o
$ gcc -I/usr/include/lua -c example_wrap.c -o example_wrap.o
$ gcc -c example.c -o example.o
$ gcc -I/usr/include/lua -L/usr/lib/lua min.o example_wrap.o example.o -o my_lua
</pre></div>

<H3><a name="Lua_nn5"></a>22.2.2 Compiling a dynamic module</H3>


<p>
Most, but not all platforms support the dynamic loading of modules (Windows &amp; Linux do). Refer to the Lua manual to determine if your platform supports it. For compiling a dynamically loaded module the same wrapper can  be used. The commands will be something like this:
</p>
<div class="shell"><pre>
$ swig -lua example.i -o example_wrap.c
$ gcc -I/usr/include/lua -c example_wrap.c -o example_wrap.o
$ gcc -c example.c -o example.o
$ gcc -shared -I/usr/include/lua -L/usr/lib/lua example_wrap.o example.o -o example.so
</pre></div>
<p>
The wrappers produced by SWIG can be compiled and linked with Lua 5.1.x. The loading is extremely simple.
</p>
<div class="targetlang"><pre>
require("example")
</pre></div>
<p>
For those using Lua 5.0.x, you will also need an interpreter with the loadlib function (such as the default interpreter compiled with Lua). In order to dynamically load a module you must call the loadlib function with two parameters: the filename of the shared library, and the function exported by SWIG. Calling loadlib should return the function, which you then call to initialise the module
</p>
<div class="targetlang"><pre>
my_init=loadlib("example.so","luaopen_example") -- for Unix/Linux
--my_init=loadlib("example.dll","luaopen_example") -- for Windows
assert(my_init) -- name sure its not nil
my_init()       -- call the init fn of the lib
</pre></div>
<p>
Or can be done in a single line of Lua code
</p>
<div class="targetlang"><pre>
assert(loadlib("example.so","luaopen_example"))()
</pre></div>


<p>
If the code didn't work, don't panic. The best thing to do is to copy the module and your interpreter into a single directory and then execute the interpreter and try to manually load the module (take care, all this code is case sensitive).
</p>
<div class="targetlang"><pre>
a,b,c=package.loadlib("example.so","luaopen_example") -- for Unix/Linux
--a,b,c=package.loadlib("example.dll","luaopen_example") -- for Windows
print(a,b,c)
</pre></div>
<p>
Note: for Lua 5.0:<br>
The loadlib() function is in the global namespace, not in package. So its just loadlib().
</p>
<p>
if 'a' is a function, this its all working fine, all you need to do is call it
</p>
<div class="targetlang"><pre>
  a()
</pre></div>
<p>
to load your library which will add a table 'example' with all the functions added.
</p>
<p>
If it doesn't work, look at the error messages, in particular mesage 'b'<br>
<tt>  The specified module could not be found.</tt><br>
Means that is cannot find the module, check your the location and spelling of the module.<br>
<tt>  The specified procedure could not be found.</tt><br>
Means that it loaded the module, but cannot find the named function. Again check the spelling, and if possible check to make sure the functions were exported correctly.<br>
<tt>  'loadlib' not installed/supported</tt><br>
Is quite obvious (Go back and consult the Lua documents on how to enable loadlib for your platform).
</p>


<H3><a name="Lua_nn6"></a>22.2.3 Using your module</H3>


<p>
Assuming all goes well, you will be able to this:
</p>
<div class="targetlang"><pre>
$ ./my_lua
&gt; print(example.gcd(4,6))
2
&gt; print(example.Foo)
3
&gt; example.Foo=4
&gt; print(example.Foo)
4
&gt;
</pre></div>

<H2><a name="Lua_nn7"></a>22.3 A tour of basic C/C++ wrapping</H2>


<p>
By default, SWIG tries to build a very natural Lua interface to your C/C++ code. This section briefly covers the essential aspects of this wrapping.
</p>
<H3><a name="Lua_nn8"></a>22.3.1 Modules</H3>


<p>
The SWIG module directive specifies the name of the Lua module. If you specify `module example', then everything is wrapped into a Lua table 'example' containing all the functions and variables. When choosing a module name, make sure you don't use the same name as a built-in Lua command or standard module name.
</p>
<H3><a name="Lua_nn9"></a>22.3.2 Functions</H3>


<p>
 Global functions are wrapped as new Lua built-in functions. For example,
</p>
<div class="code"><pre>
%module example
int fact(int n);</pre></div>
<p>
creates a built-in function <tt>example.fact(n)</tt> that works exactly like you think it does:
</p>

<div class="targetlang"><pre>
&gt; print example.fact(4)
24
&gt;
</pre></div>
<p>
To avoid name collisions, SWIG create a Lua table which it keeps all the functions and global variables in. It is possible to copy the functions out of this and into the global environment with the following code. This can easily overwrite existing functions, so this must be used with care.
</p>
<div class="targetlang"><pre>
&gt; for k,v in pairs(example) do _G[k]=v end
&gt; print(fact(4))
24
&gt;
</pre></div>
<p>
It is also possible to rename the module with an assignment.
</p>
<div class="targetlang"><pre>
&gt; e=example
&gt; print(e.fact(4))
24
&gt; print(example.fact(4))
24
</pre></div>

<H3><a name="Lua_nn10"></a>22.3.3 Global variables</H3>


<p>
 Global variables (which are linked to C code) are supported, and appear to be just another variable in Lua. However the actual mechanism is more complex. Given a global variable:
</p>

<div class="code"><pre>%module example
extern double Foo;
</pre></div>
<p>
SWIG will effectively generate two functions <tt>example.Foo_set()</tt> and <tt>example.Foo_get()</tt>. It then adds a metatable to the table 'example' to call these functions at the correct time (when you attempt to set or get examples.Foo). Therefore if you were to attempt to assign the global to another variable, you will get a local copy within the interpreter, which is no longer linked to the C code.
</p>

<div class="targetlang"><pre>
&gt; print(example.Foo)
3
&gt; c=example.Foo   -- c is a COPY of example.Foo, not the same thing
&gt; example.Foo=4
&gt; print(c)
3
&gt; c=5 -- this will not effect the original example.Foo
&gt; print(example.Foo,c)
4    5
</pre></div>
<p>
Its is therefore not possible to 'move' the global variable into the global namespace as it is with functions. It is however, possible to rename the module with an assignment, to make it more convenient.
</p>
<div class="targetlang"><pre>
&gt; e=example
&gt; -- e and example are the same table
&gt; -- so e.Foo and example.Foo are the same thing
&gt; example.Foo=4
&gt; print(e.Foo)
4
</pre></div>
<p>
If a variable is marked with the %immutable directive then any attempts to set this variable will cause an Lua error. Given a global variable:
</p>

<div class="code"><pre>%module example
%immutable;
extern double Foo;
%mutable;
</pre></div>
<p>
SWIG will allow the the reading of <tt>Foo</tt> but when a set attempt is made, an error function will be called.
</p>
<div class="targetlang"><pre>
&gt; print(e.Foo) -- reading works ok
4
&gt; example.Foo=40 -- but writing does not
This variable is immutable
stack traceback:
        [C]: ?
        [C]: ?
        stdin:1: in main chunk
        [C]: ?
</pre></div>
<p>
For those people who would rather that SWIG silently ignore the setting of immutables (as previous versions of the Lua bindings did), adding a <tt>-DSWIGLUA_IGNORE_SET_IMMUTABLE</tt> compile option will remove this.
</p>
<p>
Unlike earlier versions of the binding, it is now possible to add new functions or variables to the module, just as if it were a normal table. This also allows the user to rename/remove existing functions and constants (but not linked variables, mutable or immutable). Therefore users are recommended to be careful when doing so.
</p>
<div class="targetlang"><pre>
&gt; -- example.PI does not exist
&gt; print(example.PI)
nil
&gt; example.PI=3.142 -- new value added
&gt; print(example.PI)
3.142
</pre></div>

<H3><a name="Lua_nn11"></a>22.3.4 Constants and enums</H3>


<p>
Because Lua doesn't really have the concept of constants, C/C++ constants are not really constant in Lua. They are actually just a copy of the value into the Lua interpreter. Therefore they can be changed just as any other value. For example given some constants:
</p>
<div class="code"><pre>%module example
%constant int ICONST=42;
#define    SCONST      "Hello World"
enum Days{SUNDAY,MONDAY,TUESDAY,WEDNESDAY,THURSDAY,FRIDAY,SATURDAY};
</pre></div>
<p>
This is 'effectively' converted into the following Lua code:
</p>
<div class="targetlang"><pre>
example.ICONST=42
example.SCONST="Hello World"
example.SUNDAY=0
....
</pre></div>
<p>
Constants are not guaranteed to remain constant in Lua. The name of the constant could be accidentally reassigned to refer to some other object. Unfortunately, there is no easy way for SWIG to generate code that prevents this. You will just have to be careful.
</p>
<H3><a name="Lua_nn12"></a>22.3.5 Pointers</H3>


<p>
C/C++ pointers are fully supported by SWIG. Furthermore, SWIG has no problem working with incomplete type information. Given a wrapping of the &lt;file.h&gt; interface:
</p>
<div class="code"><pre>%module example

FILE *fopen(const char *filename, const char *mode);
int fputs(const char *, FILE *);
int fclose(FILE *);
</pre></div>
<p>
When wrapped, you will be able to use the functions in a natural way from Lua. For example:
</p>
<div class="targetlang"><pre>
&gt; f=example.fopen("junk","w")
&gt; example.fputs("Hello World",f)
&gt; example.fclose(f)
</pre></div>
<p>
Unlike many scripting languages, Lua has had support for pointers to C/C++ object built in for a long time. They are called 'userdata'. Unlike many other SWIG versions which use some kind of encoded character string, all objects will be represented as a userdata. The SWIG-Lua bindings provides a special function <tt>swig_type()</tt>, which if given a userdata object will return the type of object pointed to as a string (assuming it was a SWIG wrappered object).
</p>
<div class="targetlang"><pre>
&gt; print(f)
userdata: 003FDA80
&gt; print(swig_type(f))
FILE * -- its a FILE*
</pre></div>
<p>
Lua enforces the integrity of its userdata, so it is virtually impossible to corrupt the data. But as the user of the pointer, you are responsible for freeing it, or closing any resources associated with it (just as you would in a C program). This does not apply so strictly to classes &amp; structs (see below). One final note: if a function returns a NULL pointer, this is not encoded as a userdata, but as a Lua nil.
</p>
<div class="targetlang"><pre>
&gt; f=example.fopen("not there","r") -- this will return a NULL in C
&gt; print(f)
nil
</pre></div>

<H3><a name="Lua_nn13"></a>22.3.6 Structures</H3>


<p>
 If you wrap a C structure, it is also mapped to a Lua userdata. By adding a metatable to the userdata, this provides a very natural interface. For example,
</p>
<div class="code"><pre>struct Point{
  int x,y;
};
</pre></div>
<p>
is used as follows:
</p>
<div class="targetlang"><pre>
&gt; p=example.new_Point()
&gt; p.x=3
&gt; p.y=5
&gt; print(p.x,p.y)
3       5
&gt;
</pre></div>
<p>
Similar access is provided for unions and the data members of C++ classes.<br>
C structures are created using a function <tt>new_Point()</tt>, but for C++ classes are created using just the name <tt>Point()</tt>.
</p>
<p>
If you print out the value of p in the above example, you will see something like this:
</p>
<div class="targetlang"><pre>
&gt; print(p)
userdata: 003FA320
</pre></div>
<p>
Like the pointer in the previous section, this is held as a userdata. However, additional features have been added to make this more usable. SWIG effectivly creates some accessor/mutator functions to get and set the data. These functions will be added to the userdata's metatable. This provides the natural access to the member variables that were shown above (see end of the document for full details).
</p>
<p>
<tt>const</tt> members of a structure are read-only. Data members can also be forced to be read-only using the immutable directive. As with other immutable's, setting attempts will be cause an error. For example:
</p>
<div class="code"><pre>struct Foo {
   ...
   %immutable;
   int x;        // Read-only members
   char *name;
   %mutable;
   ...
};
</pre></div>
<p>
The mechanism for managing char* members as well as array members is similar to other languages. It is somewhat cumbersome and should probably be better handled by defining of typemaps (described later).
</p>
<p>
When a member of a structure is itself a structure, it is handled as a pointer. For example, suppose you have two structures like this:
</p>

<div class="code"><pre>struct Foo {
   int a;
};

struct Bar {
   Foo f;
};
</pre></div>
<p>
Now, suppose that you access the f attribute of Bar like this:
</p>
<div class="targetlang"><pre>
&gt; b = Bar()
&gt; x = b.f
</pre></div>
<p>
In this case, x is a pointer that points to the Foo that is inside b. This is the same value as generated by this C code:
</p>
<div class="code"><pre>
Bar b;
Foo *x = &amp;b-&gt;f;       // Points inside b
</pre></div>
<p>
Because the pointer points inside the structure, you can modify the contents and everything works just like you would expect. For example:
</p>
<div class="targetlang"><pre>
&gt; b = Bar()
&gt; b.f.a = 3               -- Modify attribute of structure member
&gt; x = b.f
&gt; x.a = 3                 -- Modifies the same structure
</pre></div>

<H3><a name="Lua_nn14"></a>22.3.7 C++ classes</H3>


<p>
C++ classes are wrapped by a Lua userdata as well. For example, if you have this class,
</p>
<div class="code"><pre>class List {
public:
  List();
  ~List();
  int  search(char *item);
  void insert(char *item);
  void remove(char *item);
  char *get(int n);
  int  length;
};
</pre></div>
<p>
you can use it in Lua like this:
</p>
<div class="targetlang"><pre>
&gt; l = example.List()
&gt; l:insert("Ale")
&gt; l:insert("Stout")
&gt; l:insert("Lager")
&gt; print(l:get(1))
Stout
&gt; print(l:length)
3
&gt;
</pre></div>
<p>
(Note: for calling methods of a class, you use <tt>class:method(args)</tt>, not <tt>class.method(args)</tt>, its an easy mistake to make. However for data attributes it is <tt>class.attribute</tt>)
</p>
<p>
Class data members are accessed in the same manner as C structures. Static class members present a special problem for Lua, as Lua doesn't have support for such features. Therefore, SWIG generates wrappers that try to work around some of these issues. To illustrate, suppose you have a class like this:
</p>
<div class="targetlang"><pre>class Spam {
public:
   static void foo();
   static int bar;

};
</pre></div>
<p>
In Lua, the static members can be accessed as follows:
</p>
<div class="code"><pre>
&gt; example.Spam_foo()            -- calling Spam::foo()
&gt; a=example.Spam_bar            -- reading Spam::bar 
&gt; example.Spam_bar=b            -- writing to Spam::bar
</pre></div>
<p>
It is not (currently) possible to access static members of an instance:
</p>
<div class="targetlang"><pre>
&gt; s=example.Spam()      -- s is a Spam instance
&gt; s.foo()                       -- Spam::foo() via an instance
                                -- does NOT work
</pre></div>

<H3><a name="Lua_nn15"></a>22.3.8 C++ inheritance</H3>


<p>
SWIG is fully aware of issues related to C++ inheritance. Therefore, if you have classes like this
</p>
<div class="code"><pre>class Foo {
...
};

class Bar : public Foo {
...
};
</pre></div>
<p>
And if you have functions like this
</p>
<div class="code"><pre>void spam(Foo *f);
</pre></div>
<p>
then the function <tt>spam()</tt> accepts a Foo pointer or a pointer to any class derived from Foo.
</p>
<p>
It is safe to use multiple inheritance with SWIG.
</p>
<H3><a name="Lua_nn16"></a>22.3.9 Pointers, references, values, and arrays</H3>


<p>
In C++, there are many different ways a function might receive and manipulate objects. For example:
</p>
<div class="code"><pre>void spam1(Foo *x);      // Pass by pointer
void spam2(Foo &amp;x);      // Pass by reference
void spam3(Foo x);       // Pass by value
void spam4(Foo x[]);     // Array of objects
</pre></div>
<p>
In SWIG, there is no detailed distinction like this--specifically, there are only "objects". There are no pointers, references, arrays, and so forth. Because of this, SWIG unifies all of these types together in the wrapper code. For instance, if you actually had the above functions, it is perfectly legal to do this:
</p>
<div class="targetlang"><pre>
&gt; f = Foo()           -- Create a Foo
&gt; spam1(f)            -- Ok. Pointer
&gt; spam2(f)            -- Ok. Reference
&gt; spam3(f)            -- Ok. Value.
&gt; spam4(f)            -- Ok. Array (1 element)
</pre></div>
<p>
Similar behaviour occurs for return values. For example, if you had functions like this,
</p>
<div class="code"><pre>Foo *spam5();
Foo &amp;spam6();
Foo  spam7();
</pre></div>
<p>
then all three functions will return a pointer to some Foo object. Since the third function (spam7) returns a value, newly allocated memory is used to hold the result and a pointer is returned (Lua will release this memory when the return value is garbage collected). The other two are pointers which are assumed to be managed by the C code and so will not be garbage collected.
</p>
<H3><a name="Lua_nn17"></a>22.3.10 C++ overloaded functions</H3>


<p>
C++ overloaded functions, methods, and constructors are mostly supported by SWIG. For example, if you have two functions like this:
</p>
<div class="code"><pre>void foo(int);
void foo(char *c);
</pre></div>
<p>
You can use them in Lua in a straightforward manner:
</p>
<div class="targetlang"><pre>
&gt; foo(3)           -- foo(int)
&gt; foo("Hello")     -- foo(char *c)
</pre></div>
<p>
However due to Lua's coercion mechanism is can sometimes do strange things.
</p>
<div class="targetlang"><pre>
&gt; foo("3")           -- "3" can be coerced into an int, so it calls foo(int)!
</pre></div>
<p>
As this coercion mechanism is an integral part of Lua, there is no easy way to get around this other than renaming of functions (see below).
</p>
<p>
Similarly, if you have a class like this,
</p>
<div class="code"><pre>class Foo {
public:
    Foo();
    Foo(const Foo &amp;);
    ...
};
</pre></div>
<p>
you can write Lua code like this:
</p>
<div class="targetlang"><pre>
&gt; f = Foo()          -- Create a Foo
&gt; g = Foo(f)         -- Copy f
</pre></div>
<p>
Overloading support is not quite as flexible as in C++. Sometimes there are methods that SWIG can't disambiguate. For example:
</p>
<div class="code"><pre>void spam(int);
void spam(short);
</pre></div>
<p>
or
</p>
<DIV CLASS="CODE"><PRE>VOID FOO(bAR *B);
void foo(Bar &amp;b);
</pre></div>
<p>
If declarations such as these appear, you will get a warning message like this:
</p>
<div class="shell"><pre>
example.i:12: Warning(509): Overloaded spam(short) is shadowed by spam(int)
at example.i:11.
</pre></div>
<p>
 To fix this, you either need to ignore or rename one of the methods. For example:
</p>
<div class="code"><pre>%rename(spam_short) spam(short);
...
void spam(int);
void spam(short);   // Accessed as spam_short
</pre></div>
<p>
or
</p>
<div class="code"><pre>%ignore spam(short);
...
void spam(int);
void spam(short);   // Ignored
</pre></div>
<p>
SWIG resolves overloaded functions and methods using a disambiguation scheme that ranks and sorts declarations according to a set of type-precedence rules. The order in which declarations appear in the input does not matter except in situations where ambiguity arises--in this case, the first declaration takes precedence.
</p>
<p>
Please refer to the "SWIG and C++" chapter for more information about overloading.
</p>
<p>
Dealing with the Lua coercion mechanism, the priority is roughly (integers, floats, strings, userdata). But it is better to rename the functions rather than rely upon the ordering.
</p>
<H3><a name="Lua_nn18"></a>22.3.11 C++ operators</H3>


<p>
Certain C++ overloaded operators can be handled automatically by SWIG. For example, consider a class like this:
</p>
<div class="code"><pre>class Complex {
private:
  double rpart, ipart;
public:
  Complex(double r = 0, double i = 0) : rpart(r), ipart(i) { }
  Complex(const Complex &amp;c) : rpart(c.rpart), ipart(c.ipart) { }
  Complex &amp;operator=(const Complex &amp;c);
  Complex operator+(const Complex &amp;c) const;
  Complex operator-(const Complex &amp;c) const;
  Complex operator*(const Complex &amp;c) const;
  Complex operator-() const;

  double re() const { return rpart; }
  double im() const { return ipart; }
};
</pre></div>
<p>
When wrapped, it works like you expect:
</p>
<div class="targetlang"><pre>
&gt; c = Complex(3,4)
&gt; d = Complex(7,8)
&gt; e = c + d
&gt; e:re()
10.0
&gt; e:im()
12.0
</pre></div>
<p>
One restriction with operator overloading support is that SWIG is not able to fully handle operators that aren't defined as part of the class. For example, if you had code like this
</p>
<div class="targetlang"><pre>class Complex {
...
friend Complex operator+(double, const Complex &amp;c);
...
};
</pre></div>
<p>
then SWIG doesn't know what to do with the friend function--in fact, it simply ignores it and issues a warning. You can still wrap the operator, but you may have to encapsulate it in a special function. For example:
</p>
<div class="targetlang"><pre>%rename(Complex_add_dc) operator+(double, const Complex &amp;);
...
Complex operator+(double, const Complex &amp;c);
</pre></div>
<p>
There are ways to make this operator appear as part of the class using the <tt>%extend</tt> directive. Keep reading.
</p>
<p>
Also, be aware that certain operators don't map cleanly to Lua, and some Lua operators don't map cleanly to C++ operators. For instance, overloaded assignment operators don't map to Lua semantics and will be ignored, and C++ doesn't support Lua's concatenation operator (<tt>..</tt>).
</p>
<p>
In order to keep maximum compatibility within the different languages in SWIG, the Lua bindings uses the same set of operator names as python. Although internally it renames the functions to something else (on order to work with Lua).
<p>
The current list of operators which can be overloaded (and the alternative function names) are:<ul>
<li><tt>__add__</tt> operator+
<li><tt>__sub__</tt> operator-
<li><tt>__mul__</tt> operator *
<li><tt>__div__</tt> operator/
<li><tt>__neg__</tt> unary minus
<li><tt>__call__</tt> operator<tt>()</tt> (often used in functor classes)
<li><tt>__pow__</tt> the exponential fn (no C++ equivalent, Lua uses <tt>^</tt>)
<li><tt>__concat__</tt> the concatenation operator (SWIG maps C++'s <tt>~</tt> to Lua's <tt>..</tt>)
<li><tt>__eq__</tt> operator<tt>==</tt>
<li><tt>__lt__</tt> operator<tt>&lt;</tt>
<li><tt>__le__</tt> operator<tt>&lt;=</tt>
</ul>
<p>
Note: in Lua, only the equals, less than, and less than equals operators are defined. The other operators (!=,&gt;,&gt;=) are achieved by using a logical not applied to the results of other operators.
</p>
<p>
The following operators cannot be overloaded (mainly because they are not supported in Lua)<ul>
<li>++ and --<li>+=,-=,*= etc<li>% operator (you have to use math.mod)<li>assignment operator<li>all bitwise/logical operations</ul>
<p>
SWIG also accepts the <tt>__str__()</tt> member function which converts an object to a string. This function should return a const char*, preferably to static memory. This will be used for the <tt>print()</tt> and <tt>tostring()</tt> functions in Lua. Assuming the complex class has a function
</p>
<div class="code"><pre>const char* __str__()
{
        static char buffer[255];
        sprintf(buffer,"Complex(%g,%g)",this-&gt;re(),this-&gt;im());
        return buffer;
}
</pre></div>
<p>
Then this will support the following code in Lua
</p>
<div class="targetlang"><pre>
&gt; c = Complex(3,4)
&gt; d = Complex(7,8)
&gt; e = c + d
&gt; print(e)
Complex(10,12)
&gt; s=tostring(e) -- s is the number in string form
&gt; print(s)
Complex(10,12)
</pre></div>
<p>
It is also possible to overload the operator<tt>[]</tt>, but currently this cannot be automatically performed. To overload the operator<tt>[]</tt> you need to provide two functions, <tt>__getitem__()</tt> and <tt>__setitem__()</tt>
</p>
<div class="code"><pre>class Complex
{
        //....
        double __getitem__(int i)const; // i is the index, returns the data
        void __setitem__(int i,double d); // i is the index, d is the data
};
</pre></div>

<H3><a name="Lua_nn19"></a>22.3.12 Class extension with %extend</H3>


<p>
 One of the more interesting features of SWIG is that it can extend structures and classes with new methods. In the previous section, the Complex class would have benefited greatly from an __str__() method as well as some repairs to the operator overloading. It can also be used to add additional functions to the class if they are needed.
</p>
<p>
Take the original Complex class
</p>
<div class="code"><pre>class Complex {
private:
  double rpart, ipart;
public:
  Complex(double r = 0, double i = 0) : rpart(r), ipart(i) { }
  Complex(const Complex &amp;c) : rpart(c.rpart), ipart(c.ipart) { }
  Complex &amp;operator=(const Complex &amp;c);
  Complex operator+(const Complex &amp;c) const;
  Complex operator-(const Complex &amp;c) const;
  Complex operator*(const Complex &amp;c) const;
  Complex operator-() const;

  double re() const { return rpart; }
  double im() const { return ipart; }
};
</pre></div>
<p>
Now we extend it with some new code
</p>
<div class="code"><pre>%extend Complex {
   const char *__str__() {
       static char tmp[1024];
       sprintf(tmp,"Complex(%g,%g)", $self-&gt;re(),$self-&gt;im());
       return tmp;
   }
   bool operator==(const Complex&amp; c)
   {    return ($self-&gt;re()==c.re() &amp;&amp; $self-&gt;im()==c.im();}
};
</pre></div>
<p>
Now, in Lua
</p>
<div class="targetlang"><pre>
&gt; c = Complex(3,4)
&gt; d = Complex(7,8)
&gt; e = c + d
&gt; print(e)      -- print uses __str__ to get the string form to print
Complex(10,12)
&gt; print(e==Complex(10,12))      -- testing the == operator
true
&gt; print(e!=Complex(12,12))  -- the != uses the == operator
true
</pre></div>
<p>
Extend works with both C and C++ code, on classes and structs. It does not modify the underlying object in any way---the extensions only show up in the Lua interface. The only item to take note of is the code has to use the '$self' instead of 'this', and that you cannot access protected/private members of the code (as you are not officially part of the class).
</p>
<H3><a name="Lua_nn20"></a>22.3.13 C++ templates</H3>


<p>
 C++ templates don't present a huge problem for SWIG. However, in order to create wrappers, you have to tell SWIG to create wrappers for a particular template instantiation. To do this, you use the template directive. For example:
</p>
<div class="code"><pre>%module example
%{
#include "pair.h"
%}

template&lt;class T1, class T2&gt;
struct pair {
   typedef T1 first_type;
   typedef T2 second_type;
   T1 first;
   T2 second;
   pair();
   pair(const T1&amp;, const T2&amp;);
  ~pair();
};

%template(pairii) pair&lt;int,int&gt;;
</pre></div>
<p>
In Lua:
</p>
<div class="targetlang"><pre>
&gt; p = example.pairii(3,4)
&gt; print(p.first,p.second)
3    4
</pre></div>
<p>
Obviously, there is more to template wrapping than shown in this example. More details can be found in the SWIG and C++ chapter. Some more complicated examples will appear later.
</p>
<H3><a name="Lua_nn21"></a>22.3.14 C++ Smart Pointers</H3>


<p>
 In certain C++ programs, it is common to use classes that have been wrapped by so-called "smart pointers." Generally, this involves the use of a template class that implements operator-&gt;() like this:
</p>
<div class="code"><pre>template&lt;class T&gt; class SmartPtr {
   ...
   T *operator-&gt;();
   ...
}
</pre></div>
<p>
Then, if you have a class like this,
</p>
<div class="code"><pre>class Foo {
public:
     int x;
     int bar();
};
</pre></div>
<p>
A smart pointer would be used in C++ as follows:
</p>
<div class="code"><pre>SmartPtr&lt;Foo&gt; p = CreateFoo();   // Created somehow (not shown)
...
p-&gt;x = 3;                        // Foo::x
int y = p-&gt;bar();                // Foo::bar
</pre></div>
<p>
To wrap this, simply tell SWIG about the SmartPtr class and the low-level Foo object. Make sure you instantiate SmartPtr using template if necessary. For example:
</p>
<div class="code"><pre>%module example
...
%template(SmartPtrFoo) SmartPtr&lt;Foo&gt;;
...
</pre></div>
<p>
Now, in Lua, everything should just "work":
</p>
<div class="targetlang"><pre>
&gt; p = example.CreateFoo()          -- Create a smart-pointer somehow
&gt; p.x = 3                          -- Foo::x
&gt; print(p:bar())                   -- Foo::bar
</pre></div>
<p>
If you ever need to access the underlying pointer returned by <tt>operator-&gt;()</tt> itself, simply use the <tt>__deref__()</tt> method. For example:
</p>
<div class="targetlang"><pre>
&gt; f = p:__deref__()     -- Returns underlying Foo *
</pre></div>

<H3><a name="Lua_nn22"></a>22.3.15 C++ Exceptions</H3>


<p>
Lua does not natively support exceptions, but it has errors which are similar. When a Lua function terminates with an error
it returns one value back to the caller. SWIG automatically maps any basic type which is thrown into a Lua error.
Therefore for a function:
</p>
<div class="code"><pre>
int message() throw(const char *) {
  throw("I died.");
  return 1;
}
</pre></div>
<p>
SWIG will automatically convert this to a Lua error.
</p>

<div class="targetlang"><pre>
> message()
I died.
stack traceback:
        [C]: in function 'message'
        stdin:1: in main chunk
        [C]: ?
>
</pre></div>

<p>
If you want to catch an exception, you must use either pcall() or xpcall(), which are documented in the Lua manual.
Using xpcall will allow you to obtain additional debug information (such as a stacktrace).
</p>

<div class="targetlang"><pre>
> function a() b() end -- function a() calls function b()
> function b() message() end -- function b() calls C++ function message(), which throws 
> ok,res=pcall(a)  -- call the function
> print(ok,res)
false   I died.
> ok,res=xpcall(a,debug.traceback)  -- call the function
> print(ok,res)
false   I died.
stack traceback:
        [C]: in function 'message'
        runme.lua:70: in function 'b'
        runme.lua:67: in function &lt;runme.lua:66&gt;
        [C]: in function 'xpcall'
        runme.lua:95: in main chunk
        [C]: ?
</pre></div>

<p>
SWIG is able to throw numeric types, enums, chars, char*'s and std::string's without problem.
However its not so simple for to throw objects. 
Thrown objects are not valid outside the 'catch' block. Therefore they cannot be
returned to the interpreter. 
The obvious ways to overcome this would be to either return a copy of the object, or so convert the object to a string and
return that. Though it seems obvious to perform the former, in some cases this is not possible, most notably when
SWIG has no information about the object, or the object is not copyable/creatable.
</p>
<p>
Therefore by default SWIG converts all thrown object into strings and returns them. So given a function:
</p>

<div class="code"><pre>
void throw_A() throw(A*) {
  throw new A();
}
</pre></div>
<p>
SWIG will just convert it (poorly) to a string and use that as its error. (Yes its not that useful, but it always works).
</p>

<div class="targetlang"><pre>
> throw_A()
object exception:A *
stack traceback:
        [C]: in function 'unknown'
        stdin:1: in main chunk
        [C]: ?
>
</pre></div>
<p>
To get a more useful behaviour out of SWIG you must either: provide a way to convert your exceptions into strings, or
throw objects which can be copied.
</p>
<p>
SWIG has typemaps for std::exception and its children already written, so a function which throws any of these will
automatically have its exception converted into an error string.
</p>
<p>
If you have your own class which you want output as a string you will need to add a typemap something like this:
</p>
<div class="code"><pre>
%typemap(throws) my_except
%{ 
  lua_pushstring(L,$1.what()); // assuming my_except::what() returns a const char* message
  SWIG_fail; // trigger the error handler
%}
</pre></div>
<p>
If you wish your exception to be returned to the interpreter, it must firstly be copyable. Then you must have and additional
<tt>%apply</tt> statement, to inform SWIG to return a copy of this object to the interpreter. For example:
</p>
<div class="code"><pre>
%apply SWIGTYPE EXCEPTION_BY_VAL {Exc}; // tell SWIG to return Exc by value to interpreter

class Exc {
public:
  Exc(int c, const char *m) {
    code = c;
    strncpy(msg,m,256);
  }
  int code;
  char msg[256];
};

void throw_exc() throw(Exc) {
  throw(Exc(42,"Hosed"));
} 
</pre></div>
<p>
Then the following code can be used (note: we use pcall to catch the error so we can process the exception).
</p>
<div class="targetlang"><pre>
> ok,res=pcall(throw_exc)
> print(ok)
false
> print(res)
userdata: 0003D880
> print(res.code,res.msg)
42      Hosed
>
</pre></div>

<p>
Note: is is also possible (though tedious) to have a function throw several different kinds of exceptions. To process this
will require a pcall, followed by a set of if statements checking the type of the error.
</p>
<p>
All of this code assumes that your C++ code uses exception specification (which a lot doesn't).
If it doesn't consult the "<a href="SWIGPlus.html#SWIGPlus_catches">Exception handling with %catches</a>" section
and the "<a href="Customization.html#exception">Exception handling with %exception</a>" section, for more details on how to
add exception specification to functions or globally (respectively).
</p>


<H3><a name="Lua_nn23"></a>22.3.16 Writing your own custom wrappers</H3>


<p>
Sometimes, it may be neccesary to add your own special functions, which bypass the normal SWIG wrappering method, and just use the native Lua API calls. These 'native' functions allow direct adding of your own code into the module. This is performed with the <tt>%native</tt> directive as follows:
</p>
<div class="code"><pre>%native(my_func) int native_function(lua_State*L);  // registers native_function() with SWIG
...
%{
int native_function(lua_State*L) // my native code
{
 ...
}
%}
</pre></div>
<p>
The <tt>%native</tt> directive in the above example, tells SWIG that there is a function <tt>int native_function(lua_State*L);</tt> which is to be added into the module under the name '<tt>my_func</tt>'. SWIG will not add any wrappering for this function, beyond adding it into the function table. How you write your code is entirely up to you.
</p>

<H3><a name="Lua_nn24"></a>22.3.17 Adding additional Lua code</H3>


<p>
As well as adding additional C/C++ code, its also possible to add your own Lua code to the module as well.
This code is executed once all other initialisation, including the %init code has been called.
</p>
<p>
The directive <tt>%luacode</tt> adds code into the module which is executed upon loading. Normally you would
use this to add your own functions to the module. Though you could easily perform other tasks.
</p>
<div class="code"><pre>%module example;

%luacode {
  function example.greet() 
    print "hello world" 
  end

  print "Module loaded ok"
}
...
%}
</pre></div>
<p>
Notice that the code is not part of the module table. Therefore any references to the module must have the 
module name added.
</p>
<p>
Should there be an error in the Lua code, this will <em>not</em> stop loading of the module.
The default behaviour of SWIG is to print a error message to stderr and then continue. 
It is possible to change this behaviour by using a <tt>#define SWIG_DOSTRING_FAIL(STR)</tt> to
define a different behaviour should the code fail.
</p>
<p>
Good uses for this feature is adding of new code, or writing helper functions to simplify some of the code.
See Examples/lua/arrays for an example of this code.
</p>

<H2><a name="Lua_nn25"></a>22.4 Details on the Lua binding</H2>


<p>
 In the previous section, a high-level view of Lua wrapping was presented. Obviously a lot of stuff happens behind the scenes to make this happen. This section will explain some of the low-level details on how this is achieved.
</p>
<p>
 <i>If you just want to use SWIG and don't care how it works, then stop reading here. This is going into the guts of the code and how it works. Its mainly for people who need to know whats going on within the code.
 </i>
</p>

<H3><a name="Lua_nn26"></a>22.4.1 Binding global data into the module.</H3>


<p>
Assuming that you had some global data that you wanted to share between C and Lua. How does SWIG do it?
</p>
<div class="code"><pre>%module example;
extern double Foo;
</pre></div>
<p>
SWIG will effectively generate the pair of functions
</p>
<div class="code"><pre>void Foo_set(double);
double Foo_get();
</pre></div>
<p>
At initialisation time, it will then add to the interpreter a table called 'example', which represents the module. It will then add all its functions to the module. (Note: older versions of SWIG actually added the Foo_set() and Foo_get() functions, current implementation does not add these functions any more.) But it also adds a metatable to this table, which has two functions (<tt>__index</tt> and <tt>__newindex</tt>) as well as two tables (<tt>.get</tt> and <tt>.set</tt>) The following Lua code will show these hidden features.
</p>
<div class="targetlang"><pre>
&gt; print(example)
table: 003F8F90
&gt; m=getmetatable(example)
&gt; table.foreach(m,print)
.set    table: 003F9088
.get    table: 003F9038
__index function: 003F8FE0
__newindex      function: 003F8FF8
&gt; g=m['.get']
&gt; table.foreach(g,print)
Foo     function: 003FAFD8
&gt;
</pre></div>
<p>
The .get and .set tables are lookups connecting the variable name 'Foo' to the accessor/mutator functions (Foo_set,Foo_get)
</p>
<p>
The Lua equivalent of the code for the <tt>__index</tt> and <tt>__newindex</tt> looks a bit like this
</p>
<div class="targetlang"><pre>
function __index(mod,name)
        local g=getmetatable(mod)['.get'] -- gets the table
        if not g then return nil end
        local f=g[name] -- looks for the function
        -- calls it &amp; returns the value
        if type(f)=="function" then return f() end
        return nil
end

function __newindex(mod,name,value)
        local s=getmetatable(mod)['.set'] -- gets the table
        if not s then return end
        local f=s[name] -- looks for the function
        -- calls it to set the value
        if type(f)=="function" then f(value)
        else rawset(mod,name,value) end
end
</pre></div>
<p>
That way when you call '<tt>a=example.Foo</tt>', the interpreter looks at the table 'example' sees that there is no field 'Foo' and calls __index. This will in turn check in '.get' table and find the existence of 'Foo' and then return the value of the C function call 'Foo_get()'. Similarly for the code '<tt>example.Foo=10</tt>', the interpreter will check the table, then call the __newindex which will then check the '.set' table and call the C function 'Foo_set(10)'.
</p>
<H3><a name="Lua_nn27"></a>22.4.2 Userdata and Metatables</H3>


<p>
As mentioned earlier, classes and structures, are all held as pointer, using the Lua 'userdata' structure. This structure is actually a pointer to a C structure 'swig_lua_userdata', which contains the pointer to the data, a pointer to the swig_type_info (an internal SWIG struct) and a flag which marks if the object is to be disposed of when the interpreter no longer needs it. The actual accessing of the object is done via the metatable attached to this userdata.
</p>
<p>
The metatable is a Lua 5.0 feature (which is also why SWIG cannot wrap Lua 4.0). Its a table which holds a list of functions, operators and attributes. This is what gives the userdata the feeling that it is a real object and not just a hunk of memory.
</p>
<p>
Given a class
</p>
<div class="code"><pre>%module excpp;

class Point
{
public:
 int x,y;
 Point(){x=y=0;}
 ~Point(){}
 virtual void Print(){printf("Point @%p (%d,%d)\n",this,x,y);}
};
</pre></div>
<p>
SWIG will create a module excpp, with all the various function inside. However to allow the intuitive use of the userdata is also creates up a set of metatables. As seen in the above section on global variables, use of the metatables allows for wrappers to be used intuitively. To save effort, the code creates one metatable per class and stores it inside Lua's registry. Then when an new object is instantiated, the metatable is found in the registry and the userdata associated to the metatable. Currently derived classes make a complete copy of the base classes table and then add on their own additional function.
</p>
<p>
Some of the internals can be seen by looking at a classes metatable.
</p>
<div class="targetlang"><pre>
&gt; p=excpp.Point()
&gt; print(p)
userdata: 003FDB28
&gt; m=getmetatable(p)
&gt; table.foreach(m,print)
.type   Point
__gc    function: 003FB6C8
__newindex      function: 003FB6B0
__index function: 003FB698
.get    table: 003FB4D8
.set    table: 003FB500
.fn     table: 003FB528
</pre></div>
<p>
The '.type' attribute is the name of the class. The '.get' and '.set' tables work in a similar manner to the modules, the main difference is the '.fn' table which also holds all the member functions. (The '__gc' function is the classes destructor function)
</p>
<p>
The Lua equivalent of the code for enabling functions looks a little like this
</p>
<div class="targetlang"><pre>
function __index(obj,name)
        local m=getmetatable(obj) -- gets the metatable
        if not m then return nil end
        local g=m['.get'] -- gets the attribute table
        if not g then return nil end
        local f=g[name] -- looks for the get_attribute function
        -- calls it &amp; returns the value
        if type(f)=="function" then return f() end
        -- ok, so it not an attribute, maybe its a function
        local fn=m['.fn'] -- gets the function table
        if not fn then return nil end
        local f=fn[name] -- looks for the function
        -- if found the fn then return the function
        -- so the interpreter can call it
        if type(f)=="function" then return f end
        return nil
end
</pre></div>
<p>
So when 'p:Print()' is called, the __index looks on the object metatable for a 'Print' attribute, then looks for a 'Print' function. When it finds the function, it returns the function, and then interpreter can call 'Point_Print(p)'
</p>
<p>
In theory, you can play with this usertable &amp; add new features, but remember that it is a shared table between all instances of one class, and you could very easily corrupt the functions in all the instances.
</p>
<p>
Note: Both the opaque structures (like the FILE*) and normal wrappered classes/structs use the same 'swig_lua_userdata' structure. Though the opaque structures has do not have a metatable attached, or any information on how to dispose of them when the interpreter has finished with them.
</p>
<p>
Note: Operator overloads are basically done in the same way, by adding functions such as '__add' &amp; '__call' to the classes metatable. The current implementation is a bit rough as it will add any member function beginning with '__' into the metatable too, assuming its an operator overload.
</p>
<H3><a name="Lua_nn28"></a>22.4.3 Memory management</H3>


<p>
Lua is very helpful with the memory management. The 'swig_lua_userdata' is fully managed by the interpreter itself. This means that neither the C code nor the Lua code can damage it. Once a piece of userdata has no references to it, it is not instantly collected, but will be collected when Lua deems is necessary. (You can force collection by calling the Lua function <tt>collectgarbage()</tt>). Once the userdata is about to be free'ed, the interpreter will check the userdata for a metatable and for a function '__gc'. If this exists this is called. For all complete types (ie normal wrappered classes &amp; structs) this should exist. The '__gc' function will check the 'swig_lua_userdata' to check for the 'own' field and if this is true (which is will be for all owned data's) it will then call the destructor on the pointer.
</p>
<p>
It is currently not recommended to edit this field or add some user code, to change the behaviour. Though for those who wish to try, here is where to look.
</p>
<p>
It is also currently not possible to change the ownership flag on the data (unlike most other scripting languages, Lua does not permit access to the data from within the interpreter)
</p>
</body>
</html>