# ------------------------------------------------------------
# SWIG Examples Makefile
#
# This file is used by the examples to build modules.  Assuming
# you ran configure, this file will probably work.  However,
# it's not perfect so you might need to do some hand tweaking.
#
# Other notes:
#
# 1.   Take a look at the prefixes below.   Since SWIG works with
#      multiple target languages, you may need to find out where
#      certain packages have been installed.   Set the prefixes
#      accordingly.
#
# 2.   To use this makefile, set required variables, eg SRCS, INTERFACE,
#      INTERFACEDIR, INCLUDES, LIBS, TARGET, and do a
#           $(MAKE) -f Makefile.template.in SRCDIR='$(SRCDIR)' SRCS='$(SRCS)' \
#           INCLUDES='$(INCLUDES) LIBS='$(LIBS)' INTERFACE='$(INTERFACE)' \
#           INTERFACEDIR='$(INTERFACEDIR)' TARGET='$(TARGET)' method
#
#      'method' describes what is being built.
#---------------------------------------------------------------

# Regenerate Makefile if Makefile.in or config.status have changed.
Makefile: @srcdir@/Makefile.in ../config.status
	cd .. && $(SHELL) ./config.status Examples/Makefile

# SRCDIR is the relative path to the current source directory
# - For in-source-tree builds, SRCDIR with be either '' or './', but
#   '../' for the test suites that build in a subdir (e.g. C#, Java)
# - For out-of-source-tree builds, SRCDIR will be a relative
#   path ending with a '/'

# SRCDIR_SRCS, etc. are $(SRCS), etc. with $(SRCDIR) prepended
SRCDIR_SRCS    = $(addprefix $(SRCDIR),$(SRCS))
SRCDIR_CSRCS   = $(addprefix $(SRCDIR),$(CSRCS))
SRCDIR_CXXSRCS = $(addprefix $(SRCDIR),$(CXXSRCS))

ifeq (,$(SRCDIR))
SRCDIR_INCLUDE = -I.
else
SRCDIR_INCLUDE = -I. -I$(SRCDIR)
endif

TARGET     =
CC         = @CC@
CXX        = @CXX@
CPPFLAGS   = $(SRCDIR_INCLUDE)
CFLAGS     = @PLATCFLAGS@ $(EXTRA_CFLAGS)
CXXFLAGS   = @BOOST_CPPFLAGS@ @PLATCXXFLAGS@ $(EXTRA_CXXFLAGS)
LDFLAGS    =
prefix     = @prefix@
exec_prefix= @exec_prefix@
SRCS       =
INCLUDES   =
LIBS       =
INTERFACE  =
INTERFACEDIR  =
INTERFACEPATH = $(SRCDIR)$(INTERFACEDIR)$(INTERFACE)
SWIGOPT    =
PCHSUPPORT = @PCHSUPPORT@

# SWIG_LIB_DIR and SWIGEXE must be explicitly set by Makefiles using this Makefile
SWIG_LIB_DIR = ./Lib
SWIGEXE    = swig
SWIG_LIB_SET = @SWIG_LIB_SET@
SWIGTOOL   =
SWIG       = $(SWIG_LIB_SET) $(SWIGTOOL) $(SWIGEXE)

LIBM       = @LIBM@
LIBC       = @LIBC@
LIBCRYPT   = @LIBCRYPT@
SYSLIBS    = $(LIBM) $(LIBC) $(LIBCRYPT)
LIBPREFIX  =

# RUNTOOL is for use with runtime tools, eg set it to valgrind
RUNTOOL    =
# COMPILETOOL is a way to run the compiler under another tool, or more commonly just to stop the compiler executing
COMPILETOOL=
# RUNPIPE is for piping output of running interpreter/compiled code somewhere, eg RUNPIPE=\>/dev/null
RUNPIPE=

RUNME = runme

IWRAP      = $(INTERFACE:.i=_wrap.i)
ISRCS      = $(IWRAP:.i=.c)
ICXXSRCS   = $(IWRAP:.i=.cxx)
IOBJS      = $(IWRAP:.i=.@OBJEXT@)

##################################################################
# Some options for silent output
##################################################################

ifneq (,$(findstring s, $(filter-out --%, $(MAKEFLAGS))))
  # make -s detected
  SILENT=1
else
  SILENT=
endif

ifneq (,$(SILENT))
  SILENT_OPTION = -s
  SILENT_PIPE = >/dev/null
  ANT_QUIET = -q -logfile /dev/null
else
  SILENT_OPTION =
  SILENT_PIPE =
  ANT_QUIET =
endif

##################################################################
# Dynamic loading for C++
# If you are going to be building dynamic loadable modules in C++,
# you may need to edit this line appropriately.
#
# This line works for g++, but I'm not sure what it might be
# for other C++ compilers
##################################################################

CPP_DLLIBS = #-L/usr/local/lib/gcc-lib/sparc-sun-solaris2.5.1/2.7.2 \
	     -L/usr/local/lib -lg++ -lstdc++ -lgcc

# Solaris workshop 5.0
# CPP_DLLIBS = -L/opt/SUNWspro/lib -lCrun

# Symbols used for using shared libraries
SO=		@SO@
LDSHARED=	@LDSHARED@
CCSHARED=	@CCSHARED@
CXXSHARED=      @CXXSHARED@

# This is used for building shared libraries with a number of C++
# compilers.   If it doesn't work,  comment it out.
@TRYLINKINGWITHCXX@

OBJS      = $(SRCS:.c=.@OBJEXT@) $(CXXSRCS:.cxx=.@OBJEXT@)

distclean:
	rm -f Makefile
	rm -f xml/Makefile

##################################################################
# Very generic invocation of swig
##################################################################

swiginvoke:
	$(SWIG) $(SWIGOPT)

##################################################################
#####                       ANDROID                         ######
##################################################################

ANDROID = @ANDROID@
ANDROID_NDK_BUILD = @NDKBUILD@
ANDROID_ADB = @ADB@
ANT = @ANT@
TARGETID = 1

# ----------------------------------------------------------------
# Build an Android dynamically loadable module (C)
# ----------------------------------------------------------------

android: $(SRCDIR_SRCS)
	$(ANDROID) $(SILENT_OPTION) update project --target $(TARGETID) --name $(PROJECTNAME) --path .
	$(SWIG) -java $(SWIGOPT) -o $(INTERFACEDIR)$(TARGET)_wrap.c $(INTERFACEPATH)
	+$(ANDROID_NDK_BUILD) $(SILENT_PIPE)
	$(ANT) $(ANT_QUIET) debug

# ----------------------------------------------------------------
# Build an Android dynamically loadable module (C++)
# ----------------------------------------------------------------

android_cpp: $(SRCDIR_SRCS)
	$(ANDROID) $(SILENT_OPTION) update project --target $(TARGETID) --name $(PROJECTNAME) --path .
	$(SWIG) -java -c++ $(SWIGOPT) -o $(INTERFACEDIR)$(TARGET)_wrap.cpp $(INTERFACEPATH)
	+$(ANDROID_NDK_BUILD) $(SILENT_PIPE)
	$(ANT) $(ANT_QUIET) debug

# ----------------------------------------------------------------
# Android install
# ----------------------------------------------------------------

android_install:
	-$(ANDROID_ADB) uninstall $(PACKAGENAME)
	$(ANDROID_ADB) install $(INSTALLOPTIONS) bin/$(PROJECTNAME)-debug.apk

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

android_version:
	$(ANDROID_ADB) version

# -----------------------------------------------------------------
# Cleaning the Android examples
# -----------------------------------------------------------------

android_clean:
	test -n "$(SRCDIR)" && cd $(SRCDIR) ; $(ANT) -q -logfile /dev/null clean
	rm -f $(INTERFACEDIR)$(TARGET)_wrap.*
	rm -f `find $(PACKAGEDIR) -name \*.java | grep -v $(PROJECTNAME).java`
	rm -rf obj

##################################################################
#####                       CSHARP                          ######
##################################################################

# Extra CSharp specific dynamic linking options
CSHARP_DLNK  = @CSHARPDYNAMICLINKING@
CSHARP_LIBPREFIX = @CSHARPLIBRARYPREFIX@
CSHARPCOMPILER = @CSHARPCOMPILER@
CSHARPCILINTERPRETER = @CSHARPCILINTERPRETER@
CSHARPCILINTERPRETER_FLAGS = @CSHARPCILINTERPRETER_FLAGS@
CSHARPCFLAGS = @CSHARPCFLAGS@
CSHARPFLAGS =
CSHARPOPTIONS =
CSHARPSO = @CSHARPSO@
CSHARP_RUNME = ./$(RUNME).exe

# ----------------------------------------------------------------
# Build a CSharp dynamically loadable module (C)
# ----------------------------------------------------------------

csharp: $(SRCDIR_SRCS)
	$(SWIG) -csharp $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(CSHARPCFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(CSHARP_DLNK) $(LIBS) -o $(CSHARP_LIBPREFIX)$(TARGET)$(CSHARPSO)

# ----------------------------------------------------------------
# Build a CSharp dynamically loadable module (C++)
# ----------------------------------------------------------------

csharp_cpp: $(SRCDIR_SRCS)
	$(SWIG) -csharp -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(CSHARPCFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(CSHARP_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(CSHARP_LIBPREFIX)$(TARGET)$(CSHARPSO)

# ----------------------------------------------------------------
# Compile CSharp files
# ----------------------------------------------------------------

ifneq (,$(SRCDIR))
SRCDIR_CSHARPSRCS = $(addprefix $(SRCDIR),$(CSHARPSRCS))
else
SRCDIR_CSHARPSRCS =
endif

csharp_compile: $(SRCDIR_SRCS)
	$(COMPILETOOL) $(CSHARPCOMPILER) $(CSHARPFLAGS) $(CSHARPOPTIONS) $(CSHARPSRCS) $(SRCDIR_CSHARPSRCS)

# -----------------------------------------------------------------
# Run CSharp example
# -----------------------------------------------------------------

csharp_run:
	env LD_LIBRARY_PATH=$$PWD $(RUNTOOL) $(CSHARPCILINTERPRETER) $(CSHARPCILINTERPRETER_FLAGS) $(CSHARP_RUNME) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

# Version check below also works with MS csc.exe which does not understand --version
csharp_version:
	$(CSHARPCOMPILER) --version | head -n 1
	if test -n "$(CSHARPCILINTERPRETER)" ; then "$(CSHARPCILINTERPRETER)" --version ; fi

# -----------------------------------------------------------------
# Cleaning the CSharp examples
# -----------------------------------------------------------------

csharp_clean:
	rm -f *_wrap* *~ .~* $(RUNME) $(RUNME).exe *.exe.mdb gc.log `find . -name \*.cs | grep -v $(RUNME).cs`
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@CSHARPSO@

##################################################################
#####                       D                               ######
##################################################################

DLIBPREFIX = @DLIBPREFIX@

SWIGD = $(SWIG) -d
DCOMPILER = @D2COMPILER@

D_RUNME = ./$(RUNME)

# ----------------------------------------------------------------
# Build a dynamically loadable D wrapper for a C module
# ----------------------------------------------------------------

d: $(SRCDIR_SRCS)
	$(SWIGD) $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(DCFLAGS) $(EXTRA_CFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(DCFLAGS) $(EXTRA_LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(DLIBPREFIX)$(TARGET)$(SO)

# ----------------------------------------------------------------
# Build a dynamically loadable D wrapper for a C++ module
# ----------------------------------------------------------------

d_cpp: $(SRCDIR_SRCS)
	$(SWIGD) -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(DCFLAGS) $(EXTRA_CFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(DCFLAGS) $(EXTRA_LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(DLIBPREFIX)$(TARGET)$(SO)

# ----------------------------------------------------------------
# Compile D files
# ----------------------------------------------------------------

# Clear the DFLAGS environment variable for the compiler call itself
# to work around a discrepancy in argument handling between DMD and LDC.
d_compile: $(SRCDIR_SRCS)
	DFLAGS="" $(COMPILETOOL) $(DCOMPILER) $(DFLAGS) $(DSRCS)

# -----------------------------------------------------------------
# Run D example
# -----------------------------------------------------------------

d_run:
	env LD_LIBRARY_PATH=$$PWD $(RUNTOOL) $(D_RUNME) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

d_version:
	$(DCOMPILER) --version 2> /dev/null | head -n 3

# -----------------------------------------------------------------
# Clean the D examples
# -----------------------------------------------------------------

d_clean:
	rm -f *_wrap* *~ .~* $(RUNME) $(RUNME).exe `find . -name \*.d | grep -v $(RUNME).d`
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@

##################################################################
#####                       Go                              ######
##################################################################

# TODO: The Go make targets need simplifying to use configure time
# configuration or to use Make's ifeq rather than using lots of
# runtime shell code. The output will then be a lot less verbose.

GO = @GO@
GOGCC = @GOGCC@
GCCGO = @GCCGO@
GOOPT = @GOOPT@
GCCGOOPT = @GCCGOOPT@
GOVERSIONOPTION = @GOVERSIONOPTION@

GOSWIGARG = `if $(GOGCC) ; then echo -gccgo; fi`

GOSRCS = $(INTERFACE:.i=.go)
GOCSRCS = $(INTERFACE:.i=_gc.c)

GOPACKAGE = $(notdir $(INTERFACE:.i=.a))

GOPATHPARENTDIR = gopath/$(GOMOD)/src
GOPATHDIR = $(GOPATHPARENTDIR)/$(INTERFACE:.i=)

# ----------------------------------------------------------------
# Build a Go module (C)
# ----------------------------------------------------------------

$(GOPATHPARENTDIR)/go.mod:
	@mkdir gopath 2>/dev/null || true
	@mkdir gopath/$(GOMOD) 2>/dev/null || true
	@mkdir gopath/$(GOMOD)/src 2>/dev/null || true
	@mkdir $(GOPATHDIR) 2>/dev/null || true
	echo "module swigtests" > $(GOPATHDIR)/go.mod
	echo "" >> $(GOPATHDIR)/go.mod
	echo "go 1.12" >> $(GOPATHDIR)/go.mod
	mv -f $(GOPATHDIR)/go.mod $(GOPATHPARENTDIR)/go.mod

go: $(SRCDIR_SRCS) $(GOPATHPARENTDIR)/go.mod
	$(SWIG) -go -import-prefix swigtests $(GOOPT) $(GOSWIGARG) $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	@mkdir gopath 2>/dev/null || true
	@mkdir gopath/$(GOMOD) 2>/dev/null || true
	@mkdir gopath/$(GOMOD)/src 2>/dev/null || true
	@mkdir $(GOPATHDIR) 2>/dev/null || true
	rm -rf $(GOPATHDIR)/*
	cp $(ISRCS) $(GOPATHDIR)/
	if test -f $(IWRAP:.i=.h); then \
	  cp $(IWRAP:.i=.h) $(GOPATHDIR)/; \
	fi
	if test -n "$(SRCDIR_SRCS)"; then \
	  cp $(SRCDIR_SRCS) $(GOPATHDIR)/; \
	fi
	cp $(GOSRCS) $(GOPATHDIR)/
	@if test -f $(SRCDIR)$(RUNME).go; then \
	  mkdir gopath/$(GOMOD)/src/runme 2>/dev/null || true; \
	  rm -f gopath/$(GOMOD)/src/runme/*; \
	fi
	if test -f $(SRCDIR)$(RUNME).go; then \
	  cp $(SRCDIR)$(RUNME).go gopath/$(GOMOD)/src/runme/; \
	fi
	GOPATH=`pwd`/gopath/$(GOMOD); \
	export GOPATH; \
	CGO_CPPFLAGS="$(CPPFLAGS) $(INCLUDES) -I `cd $(SRCDIR) && pwd` -I `pwd`"; \
	export CGO_CPPFLAGS; \
	CGO_CFLAGS="$(CFLAGS)"; \
	export CGO_CFLAGS; \
	CGO_LDFLAGS="$(LDFLAGS) -lm"; \
	export CGO_LDFLAGS; \
	(cd $(GOPATHDIR)/ && $(COMPILETOOL) $(GO) build `if $(GOGCC); then echo -compiler=gccgo; fi` -o $(GOPACKAGE)); \
	stat=$$?; \
	if test $$stat != 0; then \
	  exit $$stat; \
	fi; \
	if $(GOGCC); then \
	  cp $(GOPATHDIR)/$(GOPACKAGE) $(GOPATHDIR)/$(GOPACKAGE:.a=.gox); \
	fi; \
	if test -f $(SRCDIR)$(RUNME).go; then \
	  mkdir gopath/$(GOMOD)/src/swigtests 2>/dev/null || true; \
	  mkdir gopath/$(GOMOD)/src/swigtests/$(INTERFACE:.i=) 2>/dev/null || true; \
	  cp $(GOPATHDIR)/* gopath/$(GOMOD)/src/swigtests/$(INTERFACE:.i=)/; \
	  (cd gopath/$(GOMOD)/src/runme && $(COMPILETOOL) $(GO) build `if $(GOGCC); then echo -compiler=gccgo; fi` -o runme $(RUNME).go); \
	  stat=$$?; \
	  if test $$stat != 0; then \
	    exit $$stat; \
	  fi; \
	  cp gopath/$(GOMOD)/src/runme/runme $(RUNME); \
	fi

# ----------------------------------------------------------------
# Build a Go module (C++)
# ----------------------------------------------------------------

go_cpp: $(SRCDIR_SRCS) $(GOPATHPARENTDIR)/go.mod
	$(SWIG) -go -c++ -import-prefix swigtests $(GOOPT) $(GOSWIGARG) $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	@mkdir gopath 2>/dev/null || true
	@mkdir gopath/$(GOMOD) 2>/dev/null || true
	@mkdir gopath/$(GOMOD)/src 2>/dev/null || true
	@mkdir $(GOPATHDIR) 2>/dev/null || true
	rm -rf $(GOPATHDIR)/*
	cp $(ICXXSRCS) $(GOPATHDIR)/
	if test -f $(IWRAP:.i=.h); then \
	  cp $(IWRAP:.i=.h) $(GOPATHDIR)/; \
	fi
	if test -n "$(SRCDIR_CXXSRCS)"; then \
	  cp $(SRCDIR_CXXSRCS) $(GOPATHDIR)/; \
	fi
	if test -n "$(SRCDIR_SRCS)"; then \
	  cp $(SRCDIR_SRCS) $(GOPATHDIR)/; \
	fi
	cp $(GOSRCS) $(GOPATHDIR)/
	@if test -f $(SRCDIR)$(RUNME).go; then \
	  mkdir gopath/$(GOMOD)/src/runme 2>/dev/null || true; \
	  rm -f gopath/$(GOMOD)/src/runme/*; \
	fi
	if test -f $(SRCDIR)$(RUNME).go; then \
	  cp $(SRCDIR)$(RUNME).go gopath/$(GOMOD)/src/runme/; \
	fi
	GOPATH=`pwd`/gopath/$(GOMOD); \
	export GOPATH; \
	CGO_CPPFLAGS="$(CPPFLAGS) $(INCLUDES) -I `cd $(SRCDIR) && pwd` -I `pwd`"; \
	export CGO_CPPFLAGS; \
	CGO_CFLAGS="$(CFLAGS)"; \
	export CGO_CFLAGS; \
	CGO_CXXFLAGS="$(CXXFLAGS)"; \
	export CGO_CXXFLAGS; \
	CGO_LDFLAGS="$(LDFLAGS) -lm"; \
	export CGO_LDFLAGS; \
	(cd $(GOPATHDIR) && $(COMPILETOOL) $(GO) build `if $(GOGCC); then echo -compiler=gccgo; fi` -o $(GOPACKAGE)); \
	stat=$$?; \
	if test $$stat != 0; then \
	  exit $$stat; \
	fi; \
	if $(GOGCC); then \
	  cp $(GOPATHDIR)/$(GOPACKAGE) $(GOPATHDIR)/$(GOPACKAGE:.a=.gox); \
	fi; \
	if test -f $(SRCDIR)$(RUNME).go; then \
	  mkdir gopath/$(GOMOD)/src/swigtests 2>/dev/null || true; \
	  mkdir gopath/$(GOMOD)/src/swigtests/$(INTERFACE:.i=) 2>/dev/null || true; \
	  cp $(GOPATHDIR)/* gopath/$(GOMOD)/src/swigtests/$(INTERFACE:.i=)/; \
	  (cd gopath/$(GOMOD)/src/runme && $(COMPILETOOL) $(GO) build `if $(GOGCC); then echo -compiler=gccgo; fi` -o runme $(RUNME).go); \
	  stat=$$?; \
	  if test $$stat != 0; then \
	    exit $$stat; \
	  fi; \
	  cp gopath/$(GOMOD)/src/runme/runme $(RUNME); \
	fi

# -----------------------------------------------------------------
# Running Go example
# -----------------------------------------------------------------

go_run:
	env $(RUNTOOL) ./$(RUNME) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

go_version:
	$(GO) $(GOVERSIONOPTION)

# -----------------------------------------------------------------
# Cleaning the Go examples
# -----------------------------------------------------------------

go_clean:
	rm -f *_wrap* *_gc* *.gox .~* $(RUNME) $(GOSRCS)
	rm -rf gopath
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *.[568] *.a *@SO@

##################################################################
#####                       GUILE                           ######
##################################################################

# Make sure these locate your Guile installation
GUILE         = @GUILE@
GUILE_CFLAGS  = @GUILE_CFLAGS@
GUILE_SO      = @GUILE_SO@
GUILE_LIBS    = @GUILE_LIBS@
GUILE_LIBOPTS = @LIBS@ $(SYSLIBS)
GUILE_LIBPREFIX = lib
GUILE_SCRIPT  = $(SRCDIR)$(RUNME).scm

#------------------------------------------------------------------
# Build a dynamically loaded module with passive linkage
#------------------------------------------------------------------
guile: $(SRCDIR_SRCS)
	$(SWIG) -guile -Linkage passive $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(INCLUDES) $(GUILE_CFLAGS) $(ISRCS) $(SRCDIR_SRCS)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(GUILE_LIBS) $(LIBS) -o $(GUILE_LIBPREFIX)$(TARGET)$(GUILE_SO)

guile_cpp: $(SRCDIR_SRCS)
	$(SWIG) -c++ -guile -Linkage passive $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) $(GUILE_CFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(GUILE_LIBS) $(LIBS) $(CPP_DLLIBS) -o $(GUILE_LIBPREFIX)$(TARGET)$(GUILE_SO)

guile_externalhdr:
	$(SWIG) -guile -external-runtime $(TARGET)

# -----------------------------------------------------------------
# Build Guile interpreter augmented with extra functions
# -----------------------------------------------------------------

guile_augmented: $(SRCDIR_SRCS)
	$(SWIG) -guile $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) -o $(TARGET)

# -----------------------------------------------------------------
# Build statically linked Guile interpreter
# -----------------------------------------------------------------

guile_static: $(SRCDIR_SRCS)
	$(SWIG) -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) \
	  -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \
	  $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile

guile_static_cpp: $(SRCDIR_SRCS)
	$(SWIG) -c++ -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) \
	  -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \
	  $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile

guile_simple: $(SRCDIR_SRCS)
	$(SWIG) -guile -lguilemain.i -Linkage simple $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) \
	  $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile

guile_simple_cpp: $(SRCDIR_SRCS)
	$(SWIG) -c++ -guile -lguilemain.i -Linkage simple $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) \
	  $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile

# -----------------------------------------------------------------
# Running a Guile example
# -----------------------------------------------------------------

guile_run:
	env GUILE_AUTO_COMPILE=0 $(RUNTOOL) $(GUILE) -l $(GUILE_SCRIPT) $(RUNPIPE)

guile_augmented_run:
	env GUILE_AUTO_COMPILE=0 $(RUNTOOL) ./$(TARGET) $(GUILE_RUNOPTIONS) -s $(GUILE_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

guile_version:
	$(GUILE) --version | head -n 1

# -----------------------------------------------------------------
# Cleaning the Guile examples
# -----------------------------------------------------------------

guile_clean:
	rm -f *_wrap* *~ .~* my-guile@EXEEXT@ $(TARGET)@EXEEXT@
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(GUILE_SO)

##################################################################
#####                       JAVA                            ######
##################################################################

# You need to set this variable to the java directories containing the
# files "jni.h" and "md.h"
# usually something like /usr/java/include and /usr/java/include/<arch-osname>.
JAVA_INCLUDE= @JAVAINC@

# Extra Java specific dynamic linking options
JAVA_DLNK  = @JAVADYNAMICLINKING@
JAVA_LIBPREFIX = @JAVALIBRARYPREFIX@
JAVASO =@JAVASO@
JAVALDSHARED = @JAVALDSHARED@
JAVACXXSHARED = @JAVACXXSHARED@
JAVACFLAGS = @JAVACFLAGS@
JAVAFLAGS = @JAVAFLAGS@
JAVA = @JAVA@
JAVAC = @JAVAC@ -d .

# ----------------------------------------------------------------
# Build a java dynamically loadable module (C)
# ----------------------------------------------------------------

java: $(SRCDIR_SRCS)
	$(SWIG) -java $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(JAVACFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) $(JAVA_INCLUDE)
	$(JAVALDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVA_LIBPREFIX)$(TARGET)$(JAVASO)

# ----------------------------------------------------------------
# Build a java dynamically loadable module (C++)
# ----------------------------------------------------------------

java_cpp: $(SRCDIR_SRCS)
	$(SWIG) -java -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(JAVACFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(JAVA_INCLUDE)
	$(JAVACXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVA_LIBPREFIX)$(TARGET)$(JAVASO)

# ----------------------------------------------------------------
# Compile java files
# ----------------------------------------------------------------

java_compile: $(SRCDIR_SRCS)
	$(COMPILETOOL) $(JAVAC) $(addprefix $(SRCDIR),$(JAVASRCS))

# -----------------------------------------------------------------
# Run java example
# -----------------------------------------------------------------

java_run:
	env LD_LIBRARY_PATH=$$PWD $(RUNTOOL) $(JAVA) $(JAVAFLAGS) $(RUNME) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

java_version:
	$(JAVA) -version
	$(JAVAC) -version || echo "Unknown javac version"

# -----------------------------------------------------------------
# Cleaning the java examples
# -----------------------------------------------------------------

java_clean:
	rm -f *_wrap* *~ .~* *.class `find . -name \*.java | grep -v $(RUNME).java`
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@JAVASO@

##################################################################
#####                       JAVASCRIPT                      ######
##################################################################

# Note: These targets are also from within Makefiles in the Example directories.
# There is a common makefile, 'Examples/javascript/js_example.mk' to simplify
# create a configuration for a new example.

ROOT_DIR = @ROOT_DIR@
JSINCLUDES = @JSCOREINC@ @JSV8INC@
JSDYNAMICLINKING = @JSCOREDYNAMICLINKING@ @JSV8DYNAMICLINKING@
NODEJS = @NODEJS@
NODEGYP = @NODEGYP@
ifneq (, $(ENGINE))
    JSENGINE=$(ENGINE)
else
ifneq (, $(NODEJS))
    JSENGINE=node
else
ifneq (, @JSCENABLED@)
    JSENGINE=jsc
else
ifneq (, @JSV8ENABLED@)
    JSENGINE=v8
else
    # Shouldn't happen, but avoid empty value if it does.
    JSENGINE=node
endif
endif
endif
endif

# ----------------------------------------------------------------
# Creating and building Javascript wrappers
# ----------------------------------------------------------------

javascript_wrapper:
ifeq (node,$(JSENGINE))
	$(SWIG) -javascript $(SWIGOPT) -$(JSENGINE) -o $(INTERFACEDIR)$(TARGET)_wrap.cxx $(INTERFACEPATH)
else
	$(SWIG) -javascript $(SWIGOPT) -$(JSENGINE) -o $(INTERFACEDIR)$(TARGET)_wrap.c $(INTERFACEPATH)
endif

javascript_wrapper_cpp: $(SRCDIR_SRCS)
	$(SWIG) -javascript -c++ $(SWIGOPT) -$(JSENGINE) -o $(INTERFACEDIR)$(TARGET)_wrap.cxx $(INTERFACEPATH)

javascript_build: $(SRCDIR_SRCS)
ifeq (node,$(JSENGINE))
	sed -e 's|$$srcdir|./$(SRCDIR)|g' $(SRCDIR)binding.gyp.in > binding.gyp
	MAKEFLAGS= $(NODEGYP) --loglevel=silent configure build 1>>/dev/null
else
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) $(JSINCLUDES)
	$(LDSHARED) $(CCSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JSDYNAMICLINKING) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO)
endif

javascript_build_cpp: $(SRCDIR_SRCS)
ifeq (node,$(JSENGINE))
	sed -e 's|$$srcdir|./$(SRCDIR)|g' $(SRCDIR)binding.gyp.in > binding.gyp
	MAKEFLAGS= $(NODEGYP) --loglevel=silent configure build 1>>/dev/null
else
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(JSINCLUDES)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JSDYNAMICLINKING) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO)
endif

# These targets are used by the test-suite:

javascript: $(SRCDIR_SRCS) javascript_custom_interpreter
	$(SWIG) -javascript $(SWIGOPT) $(INTERFACEPATH)
ifeq (jsc, $(ENGINE))
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) $(JSINCLUDES)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JSDYNAMICLINKING) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO)
else # (v8 | node) # v8 and node must be compiled as c++
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(JSINCLUDES)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JSDYNAMICLINKING) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO)
endif

javascript_cpp: $(SRCDIR_SRCS) javascript_custom_interpreter
	$(SWIG) -javascript -c++ $(SWIGOPT) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(JSINCLUDES)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(JSDYNAMICLINKING) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO)

# -----------------------------------------------------------------
# Running a Javascript example
# -----------------------------------------------------------------

javascript_custom_interpreter:
	(cd $(ROOT_DIR)/Tools/javascript && $(MAKE) JSENGINE='$(JSENGINE)')

ifeq (node,$(JSENGINE))
javascript_run:
	env NODE_PATH=$$PWD:$(SRCDIR) $(RUNTOOL) $(NODEJS) $(SRCDIR)$(RUNME).js $(RUNPIPE)
else
javascript_run: javascript_custom_interpreter
	$(RUNTOOL) $(ROOT_DIR)/Tools/javascript/javascript -$(JSENGINE) -L $(TARGET) $(SRCDIR)$(RUNME).js $(RUNPIPE)
endif

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

javascript_version:
ifeq (, $(ENGINE))
	@if [ "$(NODEJS)" != "" ]; then \
	  echo "Node.js: `($(NODEJS) --version)`"; \
	  echo "node-gyp: `($(NODEGYP) --version)`"; \
	else \
	  echo "Version depends on the interpreter"; \
	fi
endif
ifeq (node, $(ENGINE))
	echo "Node.js: `($(NODEJS) --version)`"
	echo "node-gyp: `($(NODEGYP) --version)`"
endif
ifeq (jsc, $(ENGINE))
	@if [ "@JSCOREVERSION@" != "" ]; then \
	  echo "JavaScriptCore: @JSCOREVERSION@"; \
	else \
	  echo "Unknown JavaScriptCore version."; \
	fi
endif
ifeq (v8, $(ENGINE))
	echo "Unknown v8 version."
endif

# -----------------------------------------------------------------
# Cleaning the Javascript examples
# -----------------------------------------------------------------

javascript_clean:
	rm -rf build
	rm -f *_wrap* $(RUNME)
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@
	rm -f binding.gyp example-gypcopy.cxx
	cd $(ROOT_DIR)/Tools/javascript && $(MAKE) -s clean

##################################################################
#####                       LUA                             ######
##################################################################

# lua flags
LUA_INCLUDE= @LUAFLAGS@
LUA_LIB    = @LUALINK@

# Extra specific dynamic linking options
LUA_DLNK   = @LUADYNAMICLINKING@
LUA_SO     = @LUA_SO@

LUA        = @LUABIN@
LUA_SCRIPT = $(SRCDIR)$(RUNME).lua

# Extra code for lua static link
LUA_INTERP = ../lua.c

# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------

lua: $(SRCDIR_SRCS)
	$(SWIG) -lua $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) $(LUA_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(LUA_LIB) -o $(LIBPREFIX)$(TARGET)$(LUA_SO)

# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------

lua_cpp: $(SRCDIR_SRCS) $(GENCXXSRCS)
	$(SWIG) -c++ -lua $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(GENCXXSRCS) $(INCLUDES) $(LUA_INCLUDE)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(LUA_LIB) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(LUA_SO)

lua_externalhdr:
	$(SWIG) -lua -external-runtime $(TARGET)

lua_swig_cpp:
	$(SWIG) -c++ -lua $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)

# -----------------------------------------------------------------
# Build statically linked Lua interpreter
# -----------------------------------------------------------------

lua_static: $(SRCDIR_SRCS)
	$(SWIG) -lua -module example $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS)  $(ISRCS) $(SRCDIR_SRCS) $(SRCDIR)$(LUA_INTERP) $(INCLUDES) \
	$(LUA_INCLUDE) $(LIBS) $(LUA_LIB) -o $(TARGET)

lua_static_cpp: $(SRCDIR_SRCS) $(GENCXXSRCS)
	$(SWIG) -c++ -lua -module example $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(GENCXXSRCS) $(SRCDIR)$(LUA_INTERP) $(INCLUDES) \
	$(LUA_INCLUDE) $(LIBS)  $(LUA_LIB) -o $(TARGET)

# -----------------------------------------------------------------
# Run Lua example
# -----------------------------------------------------------------

lua_run:
	$(RUNTOOL) $(LUA) $(LUA_SCRIPT) $(RUNPIPE)

lua_embed_run:
	$(RUNTOOL) ./$(TARGET) $(LUA_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

lua_version:
	$(LUA) -v | head -n 1

# -----------------------------------------------------------------
# Cleaning the lua examples
# -----------------------------------------------------------------

lua_clean:
	rm -f *_wrap* *~ .~* mylua@EXEEXT@
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(LUA_SO)

##################################################################
#####                       MZSCHEME                        ######
##################################################################

MZSCHEME = mzscheme
MZC = @MZC@
MZDYNOBJ = @MZDYNOBJ@
MZSCHEME_SO = @MZSCHEME_SO@
MZSCHEME_SCRIPT = $(SRCDIR)$(RUNME).scm

# ----------------------------------------------------------------
# Build a C/C++ dynamically loadable module
# ----------------------------------------------------------------

mzscheme: $(SRCDIR_SRCS)
	$(SWIG) -mzscheme $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(COMPILETOOL) $(MZC) `echo " $(CPPFLAGS) $(INCLUDES) $(CFLAGS)" | sed 's/ -/ ++ccf -/g'` --cc $(ISRCS) $(SRCDIR_SRCS)
	$(COMPILETOOL) $(MZC) --ld $(TARGET)$(MZSCHEME_SO) $(OBJS) $(IOBJS)

mzscheme_cpp: $(SRCDIR_SRCS)
	$(SWIG) -mzscheme -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	env CFLAGS= $(COMPILETOOL) $(MZC) `echo " $(CPPFLAGS) $(INCLUDES) $(CXXFLAGS)" | sed 's/ -/ ++ccf -/g'` --cc $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS)
	$(CXXSHARED) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $(LIBPREFIX)$(TARGET)$(MZSCHEME_SO) $(OBJS) $(IOBJS) $(MZDYNOBJ) $(CPP_DLLIBS)

# -----------------------------------------------------------------
# Run mzscheme example
# -----------------------------------------------------------------

mzscheme_run:
	env LD_LIBRARY_PATH=$$PWD $(RUNTOOL) $(MZSCHEME) -r $(MZSCHEME_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

mzscheme_version:
	$(MZSCHEME) -v
	$(MZC) -v

# -----------------------------------------------------------------
# Cleaning the mzscheme examples
# -----------------------------------------------------------------

mzscheme_clean:
	rm -f *_wrap* *~ .~*
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(MZSCHEME_SO)

##################################################################
#####                       OCAML                           ######
##################################################################

OCC=$(COMPILETOOL) @OCAMLC@
OCC_WITH_PP=env TMPDIR=./localtmp $(OCC)
# TMPDIR above is a workaround for some ocamlc versions, such as 4.05.0, which always create a temp file of the same name breaking parallel make (seemingly only when -pp is used)
OCAMLDLGEN=$(COMPILETOOL) @OCAMLDLGEN@
OCAMLFIND=$(COMPILETOOL) @OCAMLFIND@
OCAMLMKTOP=$(COMPILETOOL) @OCAMLMKTOP@
NOLINK ?= false
OCAMLPP= -pp "camlp4o ./swigp4.cmo"
OCAMLP4WHERE=`$(COMPILETOOL) @CAMLP4@ -where`

ocaml_core:
	mkdir -p ./localtmp
	$(SWIG) -ocaml -co swig.mli 2>/dev/null
	$(SWIG) -ocaml -co swig.ml 2>/dev/null
	$(SWIG) -ocaml -co swigp4.ml 2>/dev/null
	$(OCC) -c swig.mli
	$(OCC) -c swig.ml
	$(OCC_WITH_PP) -I $(OCAMLP4WHERE) -pp "camlp4o pa_extend.cmo q_MLast.cmo" -c swigp4.ml

ocaml_static: $(SRCDIR_SRCS)
	$(SWIG) -ocaml $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCDIR_SRCS)
	$(OCC) -g -c $(INTERFACE:%.i=%.mli)
	$(OCC) -w -U -g -c $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCC) -g -ccopt -g -cclib -g -custom -o $(RUNME) swig.cmo $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) -cclib "$(LIBS)"

ocaml_dynamic: $(SRCDIR_SRCS)
	$(SWIG) -ocaml $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCDIR_SRCS)
	$(CXXSHARED) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(CCSHARED) -o $(INTERFACE:%.i=%@SO@) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) $(LIBS)
	$(OCAMLDLGEN) $(INTERFACE:%.i=%.ml) $(INTERFACE:%.i=%@SO@) > $(INTERFACE:%.i=%_dynamic.ml)
	mv $(INTERFACE:%.i=%_dynamic.ml) $(INTERFACE:%.i=%.ml)
	rm $(INTERFACE:%.i=%.mli)
	$(OCAMLFIND) $(OCC) -g -c -package dl $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCAMLFIND) $(OCC) -g -ccopt -g -cclib -g -custom -o $(RUNME) swig.cmo -package dl -linkpkg $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo)

ocaml_static_toplevel: $(SRCDIR_SRCS)
	$(SWIG) -ocaml $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCDIR_SRCS)
	$(OCC) -g -c $(INTERFACE:%.i=%.mli)
	$(OCC) -w -U -g -c $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCAMLMKTOP) swig.cmo -I $(OCAMLP4WHERE) dynlink.cma camlp4o.cma swigp4.cmo -cclib "$(LIBS)" -g -ccopt -g -cclib -g -custom -o $(RUNME)_top $(INTERFACE:%.i=%.cmo) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS)

ocaml_static_cpp: $(SRCDIR_SRCS)
	$(SWIG) -ocaml -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c)
	$(OCC) -cc '$(CXX) $(CPPFLAGS) $(CXXFLAGS)' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" $(ICXXSRCS:%.cxx=%.c) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS)
	$(OCC) -g -c $(INTERFACE:%.i=%.mli)
	$(OCC) -w -U -g -c $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCC) -g -ccopt -g -cclib -g -custom -o $(RUNME) swig.cmo $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) -cclib "$(LIBS)" -cc '$(CXX)'

ocaml_static_cpp_toplevel: $(SRCDIR_SRCS)
	$(SWIG) -ocaml -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c)
	$(OCC) -cc '$(CXX) $(CPPFLAGS) $(CXXFLAGS)' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" $(ICXXSRCS:%.cxx=%.c) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS)
	$(OCC) -g -c $(INTERFACE:%.i=%.mli)
	$(OCC) -w -U -g -c $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCAMLMKTOP) -cc '$(CXX) $(CPPFLAGS)' swig.cmo -I $(OCAMLP4WHERE) dynlink.cma camlp4o.cma swigp4.cmo -cclib "$(LIBS)" -g -ccopt -g -cclib -g -custom -o $(RUNME)_top $(INTERFACE:%.i=%.cmo) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS)

ocaml_dynamic_cpp: $(SRCDIR_SRCS)
	$(SWIG) -ocaml -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c)
	$(OCC) -cc '$(CXX) $(CPPFLAGS) $(CXXFLAGS)' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" $(ICXXSRCS:%.cxx=%.c) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) -ccopt -fPIC
	$(CXXSHARED) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $(INTERFACE:%.i=%@SO@) $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) $(CPP_DLLIBS) $(LIBS)
	$(OCAMLDLGEN) $(INTERFACE:%.i=%.ml) $(INTERFACE:%.i=%@SO@) > $(INTERFACE:%.i=%_dynamic.ml)
	mv $(INTERFACE:%.i=%_dynamic.ml) $(INTERFACE:%.i=%.ml)
	rm $(INTERFACE:%.i=%.mli)
	$(OCAMLFIND) $(OCC) -g -c -package dl $(INTERFACE:%.i=%.ml)
	test -z "$(PROGFILE)" || $(OCC_WITH_PP) -o $(PROGFILE:%.ml=%) $(OCAMLPP) -c $(SRCDIR)$(PROGFILE)
	$(NOLINK) || $(OCAMLFIND) swig.cmo $(OCC) -cclib -export-dynamic -g -ccopt -g -cclib -g -custom -o $(RUNME) -package dl -linkpkg $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo) -cc '$(CXX)'

# -----------------------------------------------------------------
# Run ocaml example
# -----------------------------------------------------------------

ocaml_run:
	$(RUNTOOL) ./$(RUNME) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

ocaml_version:
	$(OCC) -version

# -----------------------------------------------------------------
# Cleaning the Ocaml examples
# -----------------------------------------------------------------

ocaml_clean:
	rm -f *_wrap* *~ .~* *.cmo *.cmi *.mli $(TARGET).ml $(RUNME) $(RUNME)_top swig.ml swigp4.ml
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@
	rm -rf ./localtmp

##################################################################
#####                       OCTAVE                          ######
##################################################################

# Make sure these locate your Octave installation
OCTAVE        = @OCTAVE@
OCTAVE_CXX    = $(DEFS) @OCTAVE_CPPFLAGS@ @OCTAVE_CXXFLAGS@

# Extra Octave specific dynamic linking options
OCTAVE_DLNK   = @OCTAVE_LDFLAGS@
OCTAVE_SO     = @OCTAVE_SO@

OCTAVE_SCRIPT = $(SRCDIR)$(RUNME).m

# ----------------------------------------------------------------
# Pre-compile Octave headers, if supported
# ----------------------------------------------------------------

ifeq (yes,$(PCHSUPPORT))

octave_precompile_headers:
	echo "precompiling $(OCTHEADERS)"
	cp -f $(OCTHEADERSSRC) $(OCTHEADERS)
	if $(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES) $(OCTAVE_CXX) $(OCTHEADERS); then \
		: ; \
	else \
		rm -f $(OCTHEADERSGCH); \
		exit 1; \
	fi

else

octave_precompile_headers:
	echo "precompiling Octave headers not supported"; exit 1

endif

# ----------------------------------------------------------------
# Build a C dynamically loadable module
# Note: Octave requires C++ compiler when compiling C wrappers
# ----------------------------------------------------------------

octave: $(SRCDIR_SRCS)
	$(SWIG) -octave $(SWIGOCTHDROPT) $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -g -c $(IOCTHEADERS) $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(INCLUDES) $(OCTAVE_CXX)
	$(CC) -g -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CSRCS) $(INCLUDES)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(OCTAVE_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(OCTAVE_SO)

# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------

octave_cpp: $(SRCDIR_SRCS)
	$(SWIG) -c++ -octave $(SWIGOCTHDROPT) $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -g -c $(IOCTHEADERS) $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(OCTAVE_CXX)
	$(CXXSHARED) -g $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(OCTAVE_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(OCTAVE_SO)

# -----------------------------------------------------------------
# Running an Octave example
# -----------------------------------------------------------------

octave_run:
	env OCTAVE_PATH= OCTAVE_HISTFILE=/dev/null $(RUNTOOL) $(OCTAVE) $(OCTAVE_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

octave_version:
	$(OCTAVE) --version | head -n 1

# -----------------------------------------------------------------
# Cleaning the Octave examples
# -----------------------------------------------------------------

octave_clean:
	rm -rf __pycache__
	rm -f *_wrap* *~ .~* myoctave@EXEEXT@ *.pyc
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@ *$(OCTAVE_SO)
	rm -f $(OCTHEADERS) $(OCTHEADERSGCH)

##################################################################
#####                       PERL 5                          ######
##################################################################

# You need to set this variable to the Perl5 directory containing the
# files "perl.h", "EXTERN.h" and "XSUB.h".   With Perl5.003, it's
# usually something like /usr/local/lib/perl5/arch-osname/5.003/CORE.

PERL5_INCLUDE= @PERL5EXT@

# Extra Perl specific dynamic linking options
PERL5_DLNK   = @PERL5DYNAMICLINKING@
PERL5_CCFLAGS = @PERL5CCFLAGS@
PERL5_CCDLFLAGS = @PERL5CCDLFLAGS@
PERL5_CCCDLFLAGS = @PERL5CCCDLFLAGS@
PERL5_LDFLAGS = @PERL5LDFLAGS@
PERL = @PERL@
PERL5_LIB = -L$(PERL5_INCLUDE) -l@PERL5LIB@ @LIBS@ $(SYSLIBS)
PERL5_SCRIPT = $(SRCDIR)$(RUNME).pl

# ----------------------------------------------------------------
# Build a Perl5 dynamically loadable module (C)
# ----------------------------------------------------------------

perl5: $(SRCDIR_SRCS)
	$(SWIG) -perl5 $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c -Dbool=char $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) $(PERL5_CCFLAGS) $(PERL5_CCCDLFLAGS) -I$(PERL5_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(PERL5_CCDLFLAGS) $(OBJS) $(IOBJS) $(PERL5_LDFLAGS) $(PERL5_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO)

# ----------------------------------------------------------------
# Build a Perl5 dynamically loadable module (C++)
# ----------------------------------------------------------------

perl5_cpp: $(SRCDIR_SRCS)
	$(SWIG) -perl5 -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(PERL5_CCFLAGS) $(PERL5_CCCDLFLAGS) -I$(PERL5_INCLUDE)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(PERL5_CCDLFLAGS) $(OBJS) $(IOBJS) $(PERL5_LDFLAGS) $(PERL5_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO)

# ----------------------------------------------------------------
# Build a module from existing XS C source code.   (ie. from xsubpp).
# ----------------------------------------------------------------
perl5_xs: $(SRCDIR_SRCS)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SRCDIR_SRCS) $(INCLUDES) -I$(PERL5_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $(TARGET)$(SO)

# ----------------------------------------------------------------
# Build a statically linked Perl5 executable
# ----------------------------------------------------------------

perl5_static: $(SRCDIR_SRCS)
	$(SWIG) -perl5 -static -lperlmain.i $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -Dbool=char $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET)

perl5_static_cpp: $(SRCDIR_SRCS)
	$(SWIG) -perl5 -c++ -static -lperlmain.i $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET)

# -----------------------------------------------------------------
# Running a Perl5 example
# -----------------------------------------------------------------

perl5_run:
	$(RUNTOOL) $(PERL) -I. $(PERL5_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

perl5_version:
	$(PERL) -v | grep "This is"

# -----------------------------------------------------------------
# Cleaning the Perl5 examples
# -----------------------------------------------------------------

perl5_clean:
	rm -f *_wrap* *~ .~* myperl@EXEEXT@ *.pm
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@

##################################################################
#####                       PHP                             ######
##################################################################

PHP         = @PHP@
PHP_INCLUDE = @PHPINC@
PHP_SO      = @PHP_SO@
PHP_SCRIPT  = $(SRCDIR)$(RUNME).php
PHP_EXTENSION = example$(PHP_SO)

# -------------------------------------------------------------------
# Build a PHP dynamically loadable module (C)
# -------------------------------------------------------------------

php: $(SRCDIR_SRCS)
	$(SWIG) -php $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) $(PHP_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(PHP_SO)

# --------------------------------------------------------------------
# Build a PHP dynamically loadable module (C++)
# --------------------------------------------------------------------

php_cpp: $(SRCDIR_SRCS)
	$(SWIG) -php -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(PHP_INCLUDE)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(PHP_SO)

# -----------------------------------------------------------------
# Running a PHP example
# -----------------------------------------------------------------

php_run:
	$(RUNTOOL) $(PHP) -n -d extension_dir=. -d extension=$(PHP_EXTENSION) -d display_errors=stderr -r 'set_error_handler(function($$n,$$s,$$f,$$l){if($$f!==Null){print$$f;if($$l!==Null)print":$$l";print": ";}print"$$s\n";exit(1);});if(strlen($$argv[1]))include($$argv[1]);' '$(PHP_SCRIPT)' $(RUNPIPE)

php_run_multi:
	$(RUNTOOL) $(PHP) -n -d extension_dir=. `while read e ; do echo ' -d extension=$(TARGETPREFIX)'"$$e"'@PHP_SO@' ; done < $(PHP_EXTENSION_LIST)` -d display_errors=stderr -r 'set_error_handler(function($$n,$$s,$$f,$$l){if($$f!==Null){print$$f;if($$l!==Null)print":$$l";print": ";}print"$$s\n";exit(1);});if(strlen($$argv[1]))include($$argv[1]);' '$(PHP_SCRIPT)' $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

php_version:
	$(PHP) -v | head -n 1

# -----------------------------------------------------------------
# Cleaning the PHP examples
# -----------------------------------------------------------------

php_clean:
	rm -f *_wrap* *~ .~* example.php php_example.h
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(PHP_SO)

##################################################################
#####                       PYTHON                          ######
##################################################################

PYTHON_FLAGS =

# Make sure these locate your Python installation
ifneq (,$(PY2))
  PYTHON_INCLUDE= $(DEFS) @PYINCLUDE@
  PYTHON_LIB    = @PYLIB@
  PYTHON        = @PYTHON@ $(PYTHON_FLAGS)
else
  PYTHON_INCLUDE= $(DEFS) @PY3INCLUDE@
  PYTHON_LIB    = @PY3LIB@
  PYTHON        = @PYTHON3@ $(PYTHON_FLAGS)
endif

# Extra Python specific linking options
ifneq (,$(PY2))
  PYTHON_DLNK   = @PYTHONDYNAMICLINKING@
  PYTHON_LINK   = @PYLINK@
else
  PYTHON_DLNK   = @PYTHON3DYNAMICLINKING@
  PYTHON_LINK   = @PY3LINK@
endif
PYTHON_SO     = @PYTHON_SO@

PYCODESTYLE       = @PYCODESTYLE@
PYCODESTYLE_FLAGS = --ignore=E252,E30,E402,E501,E731,W291,W391

# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------

python: $(SRCDIR_SRCS)
	$(SWIG) -python $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) $(PYTHON_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) -o $(LIBPREFIX)_$(TARGET)$(PYTHON_SO)

# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------

python_cpp: $(SRCDIR_SRCS)
	$(SWIG) -python -c++ $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(PYTHON_INCLUDE)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)_$(TARGET)$(PYTHON_SO)

# -----------------------------------------------------------------
# Build statically linked Python interpreter
#
# These should only be used in conjunction with the %include embed.i
# library file
# -----------------------------------------------------------------

#TKINTER = -L/usr/X11R6.3/lib -L/usr/local/compat/lib -ltk4.0 -ltcl7.4 -lX11
TKINTER =
PYTHON_LIBOPTS = $(PYTHON_LINK) @LIBS@ $(TKINTER) $(SYSLIBS)

python_static: $(SRCDIR_SRCS)
	$(SWIG) -python -lembed.i $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) @LINKFORSHARED@ $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) \
	$(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET)

python_static_cpp: $(SRCDIR_SRCS)
	$(SWIG) -python -c++ -lembed.i $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) \
	$(PYTHON_INCLUDE) $(LIBS)  -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET)

# -----------------------------------------------------------------
# Running a Python example
# -----------------------------------------------------------------

PYSCRIPT = $(RUNME).py

python_run: $(PYSCRIPT)
ifneq (,$(PYCODESTYLE))
	$(COMPILETOOL) $(PYCODESTYLE) $(PYCODESTYLE_FLAGS) $(PYSCRIPT)
endif
	env PYTHONPATH=$$PWD $(RUNTOOL) $(PYTHON) $(PYSCRIPT) $(RUNPIPE)

ifneq (,$(SRCDIR))
$(RUNME).py: $(SRCDIR)$(RUNME).py
	cp $< $@
endif

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

python_version:
	$(PYTHON) -V

# -----------------------------------------------------------------
# Cleaning the python examples
# -----------------------------------------------------------------

python_clean:
	rm -rf __pycache__
	rm -f *_wrap* *~ .~* mypython@EXEEXT@ *.pyc
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@ *$(PYTHON_SO)
	rm -f $(TARGET).py
	case "x$(SRCDIR)" in x|x./);; *) rm -f $(RUNME).py;; esac

##################################################################
#####                       R                               ######
##################################################################

R = R
RCXXSRCS = $(INTERFACE:.i=_wrap.cpp) #Need to use _wrap.cpp for R build system as it does not understand _wrap.cxx
RRSRC = $(INTERFACE:.i=.R)
R_CFLAGS=-fPIC
R_OPT = --slave --quiet --no-save --no-restore
R_SCRIPT=$(SRCDIR)$(RUNME).R

# need to compile .cxx files outside of R build system to make sure that
# we get -fPIC
# CMD SHLIB stdout is piped to /dev/null to prevent echo of compiler command

# ----------------------------------------------------------------
# Build a R dynamically loadable module (C)
# ----------------------------------------------------------------

r: $(SRCDIR_SRCS)
	$(SWIG) -r $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
ifneq ($(SRCDIR_SRCS),)
	$(CC) -g -c $(CPPFLAGS) $(CFLAGS) $(R_CFLAGS) $(SRCDIR_SRCS) $(INCLUDES)
endif
	+( PKG_CPPFLAGS="$(CPPFLAGS) $(INCLUDES)" PKG_CFLAGS="$(CFLAGS)" $(COMPILETOOL) $(R) CMD SHLIB -o $(LIBPREFIX)$(TARGET)$(SO) $(ISRCS) $(OBJS) > /dev/null )

# ----------------------------------------------------------------
# Build a R dynamically loadable module (C++)
# ----------------------------------------------------------------
r_cpp: $(SRCDIR_CXXSRCS)
	$(SWIG) -c++ -r $(SWIGOPT) -o $(RCXXSRCS) $(INTERFACEPATH)
ifneq ($(SRCDIR_CXXSRCS),)
	$(CXX) -g -c $(CPPFLAGS) $(CXXFLAGS) $(R_CFLAGS) $(SRCDIR_CXXSRCS) $(INCLUDES)
endif
	+( PKG_CPPFLAGS="$(CPPFLAGS) $(INCLUDES)" PKG_CXXFLAGS="$(CXXFLAGS)" $(COMPILETOOL) $(R) CMD SHLIB -o $(LIBPREFIX)$(TARGET)$(SO) $(RCXXSRCS) $(OBJS) > /dev/null )

# -----------------------------------------------------------------
# Run R example
# -----------------------------------------------------------------

r_run:
	$(RUNTOOL) $(R) $(R_OPT) -f $(R_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

r_version:
	$(R) --version | head -n 1

# -----------------------------------------------------------------
# Cleaning the R examples
# -----------------------------------------------------------------

r_clean:
	rm -f *_wrap* *~ .~*
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@ NAMESPACE
	rm -f $(RRSRC) $(RUNME).Rout .RData

##################################################################
#####                       RUBY                            ######
##################################################################

# Make sure these locate your Ruby installation
RUBY_CFLAGS= @RUBYCCDLFLAGS@ $(DEFS)
RUBY_INCLUDE= @RUBYINCLUDE@
RUBY_LIB     = @RUBYLIB@
RUBY_DLNK = @RUBYDYNAMICLINKING@
RUBY_LIBOPTS = @RUBYLINK@ @LIBS@ $(SYSLIBS)
RUBY_SO = @RUBYSO@
RUBY = @RUBY@
RUBY_SCRIPT = $(SRCDIR)$(RUNME).rb


# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------

ruby: $(SRCDIR_SRCS)
	$(SWIG) -ruby $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) $(RUBY_INCLUDE)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(RUBY_SO)

# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------

ruby_cpp: $(SRCDIR_SRCS)
	$(SWIG) -c++ -ruby $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) $(RUBY_INCLUDE)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(RUBY_SO)

# -----------------------------------------------------------------
# Build statically linked Ruby interpreter
#
# These should only be used in conjunction with the %include embed.i
# library file
# -----------------------------------------------------------------

ruby_static: $(SRCDIR_SRCS)
	$(SWIG) -ruby -lembed.i $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(RUBY_CFLAGS) @LINKFORSHARED@ $(ISRCS) $(SRCDIR_SRCS) $(INCLUDES) \
	$(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET)

ruby_cpp_static: $(SRCDIR_SRCS)
	$(SWIG) -c++ -ruby -lembed.i $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(INCLUDES) \
	$(RUBY_INCLUDE) $(LIBS)  -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET)

# -----------------------------------------------------------------
# Run Ruby example
# -----------------------------------------------------------------

ruby_run:
	$(RUNTOOL) $(RUBY) $(RUBYFLAGS) -I. $(RUBY_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

ruby_version:
	$(RUBY) -v

# -----------------------------------------------------------------
# Cleaning the Ruby examples
# -----------------------------------------------------------------

ruby_clean:
	rm -f *_wrap* *~ .~* myruby@EXEEXT@
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(RUBY_SO)

##################################################################
#####                       SCILAB                          ######
##################################################################

SCILAB = @SCILAB@
SCILAB_INC= @SCILABINCLUDE@
SCILAB_OPT = @SCILABOPT@
SCILAB_VERSION = @SCILAB_VERSION@
SCILAB_LIBPREFIX = lib

# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------

scilab:
	$(SWIG) -scilab $(SWIGOPT) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -g -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SCILAB_INC) $(INCLUDES) $(ISRCS) $(SRCDIR_SRCS) $(SRCDIR_CSRCS)
	$(LDSHARED) $(CFLAGS) $(LDFLAGS) $(IOBJS) $(OBJS) $(LIBS) -o $(SCILAB_LIBPREFIX)$(TARGET)$(SO)

# ----------------------------------------------------------------
# Build a C++ dynamically loadable module
# ----------------------------------------------------------------

scilab_cpp:
	$(SWIG) -c++ -scilab $(SWIGOPT) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -g -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(SCILAB_INC) $(INCLUDES) $(ICXXSRCS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS)
	$(CXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(IOBJS) $(OBJS) $(LIBS) $(CPP_DLLIBS) -o $(SCILAB_LIBPREFIX)$(TARGET)$(SO)

# -----------------------------------------------------------------
# Running a Scilab example
# -----------------------------------------------------------------

scilab_run:
	env LD_LIBRARY_PATH=$$PWD $(RUNTOOL) $(SCILAB) $(SCILAB_OPT) -f $(SRCDIR)$(RUNME).sci $(RUNPIPE)

# -----------------------------------------------------------------
# Scilab version
# -----------------------------------------------------------------

scilab_version:
	echo `$(SCILAB) -nwni -version | head -1`

# -----------------------------------------------------------------
# Cleaning the scilab examples
# -----------------------------------------------------------------

scilab_clean:
	rm -f *_wrap* *~ .~*
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *@SO@
	rm -f *.sce

##################################################################
#####                       TCL                             ######
##################################################################

# Set these to your local copy of Tcl

TCLSH       = tclsh
TCL_INCLUDE = @TCLINCLUDE@
TCL_LIB     = @TCLLIB@
TCL_OPTS    = @LIBS@
TK_OPTS     = -ltk -ltcl @LIBS@

# Extra Tcl specific dynamic linking options
TCL_DLNK   = @TCLDYNAMICLINKING@
TCL_SO     = @TCL_SO@
TCLLDSHARED = @TCLLDSHARED@
TCLCXXSHARED = @TCLCXXSHARED@
TCL_SCRIPT = $(SRCDIR)$(RUNME).tcl
TCL_LINK   = @TCLLINK@

# -----------------------------------------------------------
# Build a new version of the tclsh shell
# -----------------------------------------------------------

tclsh: $(SRCDIR_SRCS)
	$(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i -o $(ISRCS) $(INTERFACEPATH)
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) $(TCL_INCLUDE) \
	$(TCL_LIB)  $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET)

tclsh_cpp: $(SRCDIR_SRCS)
	$(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(TCL_INCLUDE) \
	$(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET)

# -----------------------------------------------------------
# Build a Tcl dynamic loadable module (you might need to tweak this)
# -----------------------------------------------------------

tcl:  $(SRCDIR_SRCS)
	$(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -o $(ISRCS) $(INTERFACEPATH)
	$(CC) -c $(CCSHARED) $(CPPFLAGS) $(CFLAGS) $(SRCDIR_SRCS) $(ISRCS) $(INCLUDES) $(TCL_INCLUDE)
	$(TCLLDSHARED) $(CFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(TCL_SO) $(TCL_LINK)

# -----------------------------------------------------------
# Build a Tcl dynamic loadable module for C++
# -----------------------------------------------------------

tcl_cpp: $(SRCDIR_SRCS)
	$(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -o $(ICXXSRCS) $(INTERFACEPATH)
	$(CXX) -c $(CCSHARED) $(CPPFLAGS) $(CXXFLAGS) $(SRCDIR_SRCS) $(SRCDIR_CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(TCL_INCLUDE)
	$(TCLCXXSHARED) $(CXXFLAGS) $(LDFLAGS) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(TCL_SO) $(TCL_LINK)

# -----------------------------------------------------------------
# Run Tcl example
# -----------------------------------------------------------------

tcl_run:
	$(RUNTOOL) $(TCLSH) $(TCL_SCRIPT) $(RUNPIPE)

# -----------------------------------------------------------------
# Version display
# -----------------------------------------------------------------

tcl_version:
	echo 'puts $$tcl_version;exit 0' | $(TCLSH)

# -----------------------------------------------------------------
# Cleaning the Tcl examples
# -----------------------------------------------------------------

tcl_clean:
	rm -f *_wrap* *~ .~* mytclsh@EXEEXT@
	rm -f core @EXTRA_CLEAN@
	rm -f *.@OBJEXT@ *$(TCL_SO)