// Copyright (C) 2020, Cloudflare, Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
//     * Redistributions of source code must retain the above copyright notice,
//       this list of conditions and the following disclaimer.
//
//     * Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in the
//       documentation and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

use crate::args::*;
use crate::common::*;

use std::net::ToSocketAddrs;

use std::io::prelude::*;

use std::rc::Rc;

use std::cell::RefCell;

use ring::rand::*;

const MAX_DATAGRAM_SIZE: usize = 1350;

#[derive(Debug)]
pub enum ClientError {
    HandshakeFail,
    HttpFail,
    Other(String),
}

pub fn connect(
    args: ClientArgs, conn_args: CommonArgs,
    output_sink: impl FnMut(String) + 'static,
) -> Result<(), ClientError> {
    let mut buf = [0; 65535];
    let mut out = [0; MAX_DATAGRAM_SIZE];

    let output_sink =
        Rc::new(RefCell::new(output_sink)) as Rc<RefCell<dyn FnMut(_)>>;

    // Setup the event loop.
    let poll = mio::Poll::new().unwrap();
    let mut events = mio::Events::with_capacity(1024);

    // We'll only connect to the first server provided in URL list.
    let connect_url = &args.urls[0];

    // Resolve server address.
    let peer_addr = if let Some(addr) = &args.connect_to {
        addr.parse().unwrap()
    } else {
        connect_url.to_socket_addrs().unwrap().next().unwrap()
    };

    // Bind to INADDR_ANY or IN6ADDR_ANY depending on the IP family of the
    // server address. This is needed on macOS and BSD variants that don't
    // support binding to IN6ADDR_ANY for both v4 and v6.
    let bind_addr = match peer_addr {
        std::net::SocketAddr::V4(_) => "0.0.0.0:0",
        std::net::SocketAddr::V6(_) => "[::]:0",
    };

    // Create the UDP socket backing the QUIC connection, and register it with
    // the event loop.
    let socket = std::net::UdpSocket::bind(bind_addr).unwrap();
    socket.connect(peer_addr).unwrap();

    let socket = mio::net::UdpSocket::from_socket(socket).unwrap();
    poll.register(
        &socket,
        mio::Token(0),
        mio::Ready::readable(),
        mio::PollOpt::edge(),
    )
    .unwrap();

    // Create the configuration for the QUIC connection.
    let mut config = quiche::Config::new(args.version).unwrap();

    config.verify_peer(!args.no_verify);

    config.set_application_protos(&conn_args.alpns).unwrap();

    config.set_max_idle_timeout(conn_args.idle_timeout);
    config.set_max_recv_udp_payload_size(MAX_DATAGRAM_SIZE);
    config.set_max_send_udp_payload_size(MAX_DATAGRAM_SIZE);
    config.set_initial_max_data(conn_args.max_data);
    config.set_initial_max_stream_data_bidi_local(conn_args.max_stream_data);
    config.set_initial_max_stream_data_bidi_remote(conn_args.max_stream_data);
    config.set_initial_max_stream_data_uni(conn_args.max_stream_data);
    config.set_initial_max_streams_bidi(conn_args.max_streams_bidi);
    config.set_initial_max_streams_uni(conn_args.max_streams_uni);
    config.set_disable_active_migration(true);

    let mut keylog = None;

    if let Some(keylog_path) = std::env::var_os("SSLKEYLOGFILE") {
        let file = std::fs::OpenOptions::new()
            .create(true)
            .append(true)
            .open(keylog_path)
            .unwrap();

        keylog = Some(file);

        config.log_keys();
    }

    if conn_args.no_grease {
        config.grease(false);
    }

    config
        .set_cc_algorithm_name(&conn_args.cc_algorithm)
        .unwrap();

    if conn_args.disable_hystart {
        config.enable_hystart(false);
    }

    if conn_args.dgrams_enabled {
        config.enable_dgram(true, 1000, 1000);
    }

    let mut http_conn: Option<Box<dyn HttpConn>> = None;
    let mut siduck_conn: Option<SiDuckConn> = None;

    let mut app_proto_selected = false;

    // Generate a random source connection ID for the connection.
    let mut scid = [0; quiche::MAX_CONN_ID_LEN];
    SystemRandom::new().fill(&mut scid[..]).unwrap();

    let scid = quiche::ConnectionId::from_ref(&scid);

    // Create a QUIC connection and initiate handshake.
    let mut conn =
        quiche::connect(connect_url.domain(), &scid, &mut config).unwrap();

    if let Some(keylog) = &mut keylog {
        if let Ok(keylog) = keylog.try_clone() {
            conn.set_keylog(Box::new(keylog));
        }
    }

    // Only bother with qlog if the user specified it.
    #[cfg(feature = "qlog")]
    {
        if let Some(dir) = std::env::var_os("QLOGDIR") {
            let id = format!("{:?}", scid);
            let writer = make_qlog_writer(&dir, "client", &id);

            conn.set_qlog(
                std::boxed::Box::new(writer),
                "quiche-client qlog".to_string(),
                format!("{} id={}", "quiche-client qlog", id),
            );
        }
    }

    info!(
        "connecting to {:} from {:} with scid {:?}",
        peer_addr,
        socket.local_addr().unwrap(),
        scid,
    );

    let write = conn.send(&mut out).expect("initial send failed");

    while let Err(e) = socket.send(&out[..write]) {
        if e.kind() == std::io::ErrorKind::WouldBlock {
            trace!("send() would block");
            continue;
        }

        return Err(ClientError::Other(format!("send() failed: {:?}", e)));
    }

    trace!("written {}", write);

    let app_data_start = std::time::Instant::now();

    let mut pkt_count = 0;

    loop {
        poll.poll(&mut events, conn.timeout()).unwrap();

        // Read incoming UDP packets from the socket and feed them to quiche,
        // until there are no more packets to read.
        'read: loop {
            // If the event loop reported no events, it means that the timeout
            // has expired, so handle it without attempting to read packets. We
            // will then proceed with the send loop.
            if events.is_empty() {
                trace!("timed out");

                conn.on_timeout();

                break 'read;
            }

            let len = match socket.recv(&mut buf) {
                Ok(v) => v,

                Err(e) => {
                    // There are no more UDP packets to read, so end the read
                    // loop.
                    if e.kind() == std::io::ErrorKind::WouldBlock {
                        trace!("recv() would block");
                        break 'read;
                    }

                    return Err(ClientError::Other(format!(
                        "recv() failed: {:?}",
                        e
                    )));
                },
            };

            trace!("got {} bytes", len);

            if let Some(target_path) = conn_args.dump_packet_path.as_ref() {
                let path = format!("{}/{}.pkt", target_path, pkt_count);

                if let Ok(f) = std::fs::File::create(&path) {
                    let mut f = std::io::BufWriter::new(f);
                    f.write_all(&buf[..len]).ok();
                }
            }

            pkt_count += 1;

            // Process potentially coalesced packets.
            let read = match conn.recv(&mut buf[..len]) {
                Ok(v) => v,

                Err(e) => {
                    error!("recv failed: {:?}", e);
                    continue 'read;
                },
            };

            trace!("processed {} bytes", read);
        }

        trace!("done reading");

        if conn.is_closed() {
            info!("connection closed, {:?}", conn.stats());

            if !conn.is_established() {
                error!(
                    "connection timed out after {:?}",
                    app_data_start.elapsed(),
                );

                return Err(ClientError::HandshakeFail);
            }

            if let Some(h_conn) = http_conn {
                if h_conn.report_incomplete(&app_data_start) {
                    return Err(ClientError::HttpFail);
                }
            }

            if let Some(si_conn) = siduck_conn {
                si_conn.report_incomplete(&app_data_start);
            }

            break;
        }

        // Create a new application protocol session once the QUIC connection is
        // established.
        if conn.is_established() && !app_proto_selected {
            // At this stage the ALPN negotiation succeeded and selected a
            // single application protocol name. We'll use this to construct
            // the correct type of HttpConn but `application_proto()`
            // returns a slice, so we have to convert it to a str in order
            // to compare to our lists of protocols. We `unwrap()` because
            // we need the value and if something fails at this stage, there
            // is not much anyone can do to recover.

            let app_proto = conn.application_proto();
            let app_proto = &std::str::from_utf8(&app_proto).unwrap();

            if alpns::HTTP_09.contains(app_proto) {
                http_conn = Some(Http09Conn::with_urls(
                    &args.urls,
                    args.reqs_cardinal,
                    Rc::clone(&output_sink),
                ));

                app_proto_selected = true;
            } else if alpns::HTTP_3.contains(app_proto) {
                let dgram_sender = if conn_args.dgrams_enabled {
                    Some(Http3DgramSender::new(
                        conn_args.dgram_count,
                        conn_args.dgram_data.clone(),
                        0,
                    ))
                } else {
                    None
                };

                http_conn = Some(Http3Conn::with_urls(
                    &mut conn,
                    &args.urls,
                    args.reqs_cardinal,
                    &args.req_headers,
                    &args.body,
                    &args.method,
                    args.dump_json,
                    dgram_sender,
                    Rc::clone(&output_sink),
                ));

                app_proto_selected = true;
            } else if alpns::SIDUCK.contains(app_proto) {
                siduck_conn = Some(SiDuckConn::new(
                    conn_args.dgram_count,
                    conn_args.dgram_data.clone(),
                ));

                app_proto_selected = true;
            }
        }

        // If we have an HTTP connection, first issue the requests then
        // process received data.
        if let Some(h_conn) = http_conn.as_mut() {
            h_conn.send_requests(&mut conn, &args.dump_response_path);
            h_conn.handle_responses(&mut conn, &mut buf, &app_data_start);
        }

        // If we have a siduck connection, first issue the quacks then
        // process received data.
        if let Some(si_conn) = siduck_conn.as_mut() {
            si_conn.send_quacks(&mut conn);
            si_conn.handle_quack_acks(&mut conn, &mut buf, &app_data_start);
        }

        // Generate outgoing QUIC packets and send them on the UDP socket, until
        // quiche reports that there are no more packets to be sent.
        loop {
            let write = match conn.send(&mut out) {
                Ok(v) => v,

                Err(quiche::Error::Done) => {
                    trace!("done writing");
                    break;
                },

                Err(e) => {
                    error!("send failed: {:?}", e);

                    conn.close(false, 0x1, b"fail").ok();
                    break;
                },
            };

            if let Err(e) = socket.send(&out[..write]) {
                if e.kind() == std::io::ErrorKind::WouldBlock {
                    trace!("send() would block");
                    break;
                }

                return Err(ClientError::Other(format!(
                    "send() failed: {:?}",
                    e
                )));
            }

            trace!("written {}", write);
        }

        if conn.is_closed() {
            info!("connection closed, {:?}", conn.stats());

            if !conn.is_established() {
                error!(
                    "connection timed out after {:?}",
                    app_data_start.elapsed(),
                );

                return Err(ClientError::HandshakeFail);
            }

            if let Some(h_conn) = http_conn {
                if h_conn.report_incomplete(&app_data_start) {
                    return Err(ClientError::HttpFail);
                }
            }

            if let Some(si_conn) = siduck_conn {
                si_conn.report_incomplete(&app_data_start);
            }

            break;
        }
    }

    Ok(())
}