| /* |
| * MIPS internal definitions and helpers |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #ifndef MIPS_INTERNAL_H |
| #define MIPS_INTERNAL_H |
| |
| #include "exec/memattrs.h" |
| #ifdef CONFIG_TCG |
| #include "tcg/tcg-internal.h" |
| #endif |
| #include "cpu.h" |
| |
| /* |
| * MMU types, the first four entries have the same layout as the |
| * CP0C0_MT field. |
| */ |
| enum mips_mmu_types { |
| MMU_TYPE_NONE = 0, |
| MMU_TYPE_R4000 = 1, /* Standard TLB */ |
| MMU_TYPE_BAT = 2, /* Block Address Translation */ |
| MMU_TYPE_FMT = 3, /* Fixed Mapping */ |
| MMU_TYPE_DVF = 4, /* Dual VTLB and FTLB */ |
| MMU_TYPE_R3000, |
| MMU_TYPE_R6000, |
| MMU_TYPE_R8000 |
| }; |
| |
| struct mips_def_t { |
| const char *name; |
| int32_t CP0_PRid; |
| int32_t CP0_Config0; |
| int32_t CP0_Config1; |
| int32_t CP0_Config2; |
| int32_t CP0_Config3; |
| int32_t CP0_Config4; |
| int32_t CP0_Config4_rw_bitmask; |
| int32_t CP0_Config5; |
| int32_t CP0_Config5_rw_bitmask; |
| int32_t CP0_Config6; |
| int32_t CP0_Config6_rw_bitmask; |
| int32_t CP0_Config7; |
| int32_t CP0_Config7_rw_bitmask; |
| target_ulong CP0_LLAddr_rw_bitmask; |
| int CP0_LLAddr_shift; |
| int32_t SYNCI_Step; |
| /* |
| * @CCRes: rate at which the coprocessor 0 counter increments |
| * |
| * The Count register acts as a timer, incrementing at a constant rate, |
| * whether or not an instruction is executed, retired, or any forward |
| * progress is made through the pipeline. The rate at which the counter |
| * increments is implementation dependent, and is a function of the |
| * pipeline clock of the processor, not the issue width of the processor. |
| */ |
| int32_t CCRes; |
| int32_t CP0_Status_rw_bitmask; |
| int32_t CP0_TCStatus_rw_bitmask; |
| int32_t CP0_SRSCtl; |
| int32_t CP1_fcr0; |
| int32_t CP1_fcr31_rw_bitmask; |
| int32_t CP1_fcr31; |
| int32_t MSAIR; |
| int32_t SEGBITS; |
| int32_t PABITS; |
| int32_t CP0_SRSConf0_rw_bitmask; |
| int32_t CP0_SRSConf0; |
| int32_t CP0_SRSConf1_rw_bitmask; |
| int32_t CP0_SRSConf1; |
| int32_t CP0_SRSConf2_rw_bitmask; |
| int32_t CP0_SRSConf2; |
| int32_t CP0_SRSConf3_rw_bitmask; |
| int32_t CP0_SRSConf3; |
| int32_t CP0_SRSConf4_rw_bitmask; |
| int32_t CP0_SRSConf4; |
| int32_t CP0_PageGrain_rw_bitmask; |
| int32_t CP0_PageGrain; |
| target_ulong CP0_EBaseWG_rw_bitmask; |
| uint64_t insn_flags; |
| enum mips_mmu_types mmu_type; |
| int32_t SAARP; |
| }; |
| |
| extern const char regnames[32][3]; |
| extern const char fregnames[32][4]; |
| |
| extern const struct mips_def_t mips_defs[]; |
| extern const int mips_defs_number; |
| |
| int mips_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); |
| int mips_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); |
| |
| #define USEG_LIMIT ((target_ulong)(int32_t)0x7FFFFFFFUL) |
| #define KSEG0_BASE ((target_ulong)(int32_t)0x80000000UL) |
| #define KSEG1_BASE ((target_ulong)(int32_t)0xA0000000UL) |
| #define KSEG2_BASE ((target_ulong)(int32_t)0xC0000000UL) |
| #define KSEG3_BASE ((target_ulong)(int32_t)0xE0000000UL) |
| |
| #define KVM_KSEG0_BASE ((target_ulong)(int32_t)0x40000000UL) |
| #define KVM_KSEG2_BASE ((target_ulong)(int32_t)0x60000000UL) |
| |
| #if !defined(CONFIG_USER_ONLY) |
| |
| enum { |
| TLBRET_XI = -6, |
| TLBRET_RI = -5, |
| TLBRET_DIRTY = -4, |
| TLBRET_INVALID = -3, |
| TLBRET_NOMATCH = -2, |
| TLBRET_BADADDR = -1, |
| TLBRET_MATCH = 0 |
| }; |
| |
| int get_physical_address(CPUMIPSState *env, hwaddr *physical, |
| int *prot, target_ulong real_address, |
| MMUAccessType access_type, int mmu_idx); |
| hwaddr mips_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr); |
| |
| typedef struct r4k_tlb_t r4k_tlb_t; |
| struct r4k_tlb_t { |
| target_ulong VPN; |
| uint32_t PageMask; |
| uint16_t ASID; |
| uint32_t MMID; |
| unsigned int G:1; |
| unsigned int C0:3; |
| unsigned int C1:3; |
| unsigned int V0:1; |
| unsigned int V1:1; |
| unsigned int D0:1; |
| unsigned int D1:1; |
| unsigned int XI0:1; |
| unsigned int XI1:1; |
| unsigned int RI0:1; |
| unsigned int RI1:1; |
| unsigned int EHINV:1; |
| uint64_t PFN[2]; |
| }; |
| |
| struct CPUMIPSTLBContext { |
| uint32_t nb_tlb; |
| uint32_t tlb_in_use; |
| int (*map_address)(CPUMIPSState *env, hwaddr *physical, int *prot, |
| target_ulong address, MMUAccessType access_type); |
| void (*helper_tlbwi)(CPUMIPSState *env); |
| void (*helper_tlbwr)(CPUMIPSState *env); |
| void (*helper_tlbp)(CPUMIPSState *env); |
| void (*helper_tlbr)(CPUMIPSState *env); |
| void (*helper_tlbinv)(CPUMIPSState *env); |
| void (*helper_tlbinvf)(CPUMIPSState *env); |
| union { |
| struct { |
| r4k_tlb_t tlb[MIPS_TLB_MAX]; |
| } r4k; |
| } mmu; |
| }; |
| |
| void sync_c0_status(CPUMIPSState *env, CPUMIPSState *cpu, int tc); |
| void cpu_mips_store_status(CPUMIPSState *env, target_ulong val); |
| void cpu_mips_store_cause(CPUMIPSState *env, target_ulong val); |
| |
| extern const VMStateDescription vmstate_mips_cpu; |
| |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| static inline bool cpu_mips_hw_interrupts_enabled(CPUMIPSState *env) |
| { |
| return (env->CP0_Status & (1 << CP0St_IE)) && |
| !(env->CP0_Status & (1 << CP0St_EXL)) && |
| !(env->CP0_Status & (1 << CP0St_ERL)) && |
| !(env->hflags & MIPS_HFLAG_DM) && |
| /* |
| * Note that the TCStatus IXMT field is initialized to zero, |
| * and only MT capable cores can set it to one. So we don't |
| * need to check for MT capabilities here. |
| */ |
| !(env->active_tc.CP0_TCStatus & (1 << CP0TCSt_IXMT)); |
| } |
| |
| /* Check if there is pending and not masked out interrupt */ |
| static inline bool cpu_mips_hw_interrupts_pending(CPUMIPSState *env) |
| { |
| int32_t pending; |
| int32_t status; |
| bool r; |
| |
| pending = env->CP0_Cause & CP0Ca_IP_mask; |
| status = env->CP0_Status & CP0Ca_IP_mask; |
| |
| if (env->CP0_Config3 & (1 << CP0C3_VEIC)) { |
| /* |
| * A MIPS configured with a vectorizing external interrupt controller |
| * will feed a vector into the Cause pending lines. The core treats |
| * the status lines as a vector level, not as individual masks. |
| */ |
| r = pending > status; |
| } else { |
| /* |
| * A MIPS configured with compatibility or VInt (Vectored Interrupts) |
| * treats the pending lines as individual interrupt lines, the status |
| * lines are individual masks. |
| */ |
| r = (pending & status) != 0; |
| } |
| return r; |
| } |
| |
| void msa_reset(CPUMIPSState *env); |
| |
| /* cp0_timer.c */ |
| uint32_t cpu_mips_get_count(CPUMIPSState *env); |
| void cpu_mips_store_count(CPUMIPSState *env, uint32_t value); |
| void cpu_mips_store_compare(CPUMIPSState *env, uint32_t value); |
| void cpu_mips_start_count(CPUMIPSState *env); |
| void cpu_mips_stop_count(CPUMIPSState *env); |
| |
| static inline void mips_env_set_pc(CPUMIPSState *env, target_ulong value) |
| { |
| env->active_tc.PC = value & ~(target_ulong)1; |
| if (value & 1) { |
| env->hflags |= MIPS_HFLAG_M16; |
| } else { |
| env->hflags &= ~(MIPS_HFLAG_M16); |
| } |
| } |
| |
| static inline void restore_pamask(CPUMIPSState *env) |
| { |
| if (env->hflags & MIPS_HFLAG_ELPA) { |
| env->PAMask = (1ULL << env->PABITS) - 1; |
| } else { |
| env->PAMask = PAMASK_BASE; |
| } |
| } |
| |
| static inline int mips_vpe_active(CPUMIPSState *env) |
| { |
| int active = 1; |
| |
| /* Check that the VPE is enabled. */ |
| if (!(env->mvp->CP0_MVPControl & (1 << CP0MVPCo_EVP))) { |
| active = 0; |
| } |
| /* Check that the VPE is activated. */ |
| if (!(env->CP0_VPEConf0 & (1 << CP0VPEC0_VPA))) { |
| active = 0; |
| } |
| |
| /* |
| * Now verify that there are active thread contexts in the VPE. |
| * |
| * This assumes the CPU model will internally reschedule threads |
| * if the active one goes to sleep. If there are no threads available |
| * the active one will be in a sleeping state, and we can turn off |
| * the entire VPE. |
| */ |
| if (!(env->active_tc.CP0_TCStatus & (1 << CP0TCSt_A))) { |
| /* TC is not activated. */ |
| active = 0; |
| } |
| if (env->active_tc.CP0_TCHalt & 1) { |
| /* TC is in halt state. */ |
| active = 0; |
| } |
| |
| return active; |
| } |
| |
| static inline int mips_vp_active(CPUMIPSState *env) |
| { |
| CPUState *other_cs = first_cpu; |
| |
| /* Check if the VP disabled other VPs (which means the VP is enabled) */ |
| if ((env->CP0_VPControl >> CP0VPCtl_DIS) & 1) { |
| return 1; |
| } |
| |
| /* Check if the virtual processor is disabled due to a DVP */ |
| CPU_FOREACH(other_cs) { |
| MIPSCPU *other_cpu = MIPS_CPU(other_cs); |
| if ((&other_cpu->env != env) && |
| ((other_cpu->env.CP0_VPControl >> CP0VPCtl_DIS) & 1)) { |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static inline void compute_hflags(CPUMIPSState *env) |
| { |
| env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 | |
| MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU | |
| MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2 | |
| MIPS_HFLAG_DSP_R3 | MIPS_HFLAG_SBRI | MIPS_HFLAG_MSA | |
| MIPS_HFLAG_FRE | MIPS_HFLAG_ELPA | MIPS_HFLAG_ERL); |
| if (env->CP0_Status & (1 << CP0St_ERL)) { |
| env->hflags |= MIPS_HFLAG_ERL; |
| } |
| if (!(env->CP0_Status & (1 << CP0St_EXL)) && |
| !(env->CP0_Status & (1 << CP0St_ERL)) && |
| !(env->hflags & MIPS_HFLAG_DM)) { |
| env->hflags |= (env->CP0_Status >> CP0St_KSU) & |
| MIPS_HFLAG_KSU; |
| } |
| #if defined(TARGET_MIPS64) |
| if ((env->insn_flags & ISA_MIPS3) && |
| (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_UM) || |
| (env->CP0_Status & (1 << CP0St_PX)) || |
| (env->CP0_Status & (1 << CP0St_UX)))) { |
| env->hflags |= MIPS_HFLAG_64; |
| } |
| |
| if (!(env->insn_flags & ISA_MIPS3)) { |
| env->hflags |= MIPS_HFLAG_AWRAP; |
| } else if (((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_UM) && |
| !(env->CP0_Status & (1 << CP0St_UX))) { |
| env->hflags |= MIPS_HFLAG_AWRAP; |
| } else if (env->insn_flags & ISA_MIPS_R6) { |
| /* Address wrapping for Supervisor and Kernel is specified in R6 */ |
| if ((((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_SM) && |
| !(env->CP0_Status & (1 << CP0St_SX))) || |
| (((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_KM) && |
| !(env->CP0_Status & (1 << CP0St_KX)))) { |
| env->hflags |= MIPS_HFLAG_AWRAP; |
| } |
| } |
| #endif |
| if (((env->CP0_Status & (1 << CP0St_CU0)) && |
| !(env->insn_flags & ISA_MIPS_R6)) || |
| !(env->hflags & MIPS_HFLAG_KSU)) { |
| env->hflags |= MIPS_HFLAG_CP0; |
| } |
| if (env->CP0_Status & (1 << CP0St_CU1)) { |
| env->hflags |= MIPS_HFLAG_FPU; |
| } |
| if (env->CP0_Status & (1 << CP0St_FR)) { |
| env->hflags |= MIPS_HFLAG_F64; |
| } |
| if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_KM) && |
| (env->CP0_Config5 & (1 << CP0C5_SBRI))) { |
| env->hflags |= MIPS_HFLAG_SBRI; |
| } |
| if (env->insn_flags & ASE_DSP_R3) { |
| /* |
| * Our cpu supports DSP R3 ASE, so enable |
| * access to DSP R3 resources. |
| */ |
| if (env->CP0_Status & (1 << CP0St_MX)) { |
| env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2 | |
| MIPS_HFLAG_DSP_R3; |
| } |
| } else if (env->insn_flags & ASE_DSP_R2) { |
| /* |
| * Our cpu supports DSP R2 ASE, so enable |
| * access to DSP R2 resources. |
| */ |
| if (env->CP0_Status & (1 << CP0St_MX)) { |
| env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2; |
| } |
| |
| } else if (env->insn_flags & ASE_DSP) { |
| /* |
| * Our cpu supports DSP ASE, so enable |
| * access to DSP resources. |
| */ |
| if (env->CP0_Status & (1 << CP0St_MX)) { |
| env->hflags |= MIPS_HFLAG_DSP; |
| } |
| |
| } |
| if (env->insn_flags & ISA_MIPS_R2) { |
| if (env->active_fpu.fcr0 & (1 << FCR0_F64)) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } else if (env->insn_flags & ISA_MIPS_R1) { |
| if (env->hflags & MIPS_HFLAG_64) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } else if (env->insn_flags & ISA_MIPS4) { |
| /* |
| * All supported MIPS IV CPUs use the XX (CU3) to enable |
| * and disable the MIPS IV extensions to the MIPS III ISA. |
| * Some other MIPS IV CPUs ignore the bit, so the check here |
| * would be too restrictive for them. |
| */ |
| if (env->CP0_Status & (1U << CP0St_CU3)) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } |
| if (ase_msa_available(env)) { |
| if (env->CP0_Config5 & (1 << CP0C5_MSAEn)) { |
| env->hflags |= MIPS_HFLAG_MSA; |
| } |
| } |
| if (env->active_fpu.fcr0 & (1 << FCR0_FREP)) { |
| if (env->CP0_Config5 & (1 << CP0C5_FRE)) { |
| env->hflags |= MIPS_HFLAG_FRE; |
| } |
| } |
| if (env->CP0_Config3 & (1 << CP0C3_LPA)) { |
| if (env->CP0_PageGrain & (1 << CP0PG_ELPA)) { |
| env->hflags |= MIPS_HFLAG_ELPA; |
| } |
| } |
| } |
| |
| #endif |
