blob: 1461dfa40743ba0a33dcb3e7e795a43265f4ff3d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Linux io_uring file descriptor monitoring
*
* The Linux io_uring API supports file descriptor monitoring with a few
* advantages over existing APIs like poll(2) and epoll(7):
*
* 1. Userspace polling of events is possible because the completion queue (cq
* ring) is shared between the kernel and userspace. This allows
* applications that rely on userspace polling to also monitor file
* descriptors in the same userspace polling loop.
*
* 2. Submission and completion is batched and done together in a single system
* call. This minimizes the number of system calls.
*
* 3. File descriptor monitoring is O(1) like epoll(7) so it scales better than
* poll(2).
*
* 4. Nanosecond timeouts are supported so it requires fewer syscalls than
* epoll(7).
*
* This code only monitors file descriptors and does not do asynchronous disk
* I/O. Implementing disk I/O efficiently has other requirements and should
* use a separate io_uring so it does not make sense to unify the code.
*
* File descriptor monitoring is implemented using the following operations:
*
* 1. IORING_OP_POLL_ADD - adds a file descriptor to be monitored.
* 2. IORING_OP_POLL_REMOVE - removes a file descriptor being monitored. When
* the poll mask changes for a file descriptor it is first removed and then
* re-added with the new poll mask, so this operation is also used as part
* of modifying an existing monitored file descriptor.
* 3. IORING_OP_TIMEOUT - added every time a blocking syscall is made to wait
* for events. This operation self-cancels if another event completes
* before the timeout.
*
* io_uring calls the submission queue the "sq ring" and the completion queue
* the "cq ring". Ring entries are called "sqe" and "cqe", respectively.
*
* The code is structured so that sq/cq rings are only modified within
* fdmon_io_uring_wait(). Changes to AioHandlers are made by enqueuing them on
* ctx->submit_list so that fdmon_io_uring_wait() can submit IORING_OP_POLL_ADD
* and/or IORING_OP_POLL_REMOVE sqes for them.
*/
#include "qemu/osdep.h"
#include <poll.h>
#include "qemu/rcu_queue.h"
#include "aio-posix.h"
enum {
FDMON_IO_URING_ENTRIES = 128, /* sq/cq ring size */
/* AioHandler::flags */
FDMON_IO_URING_PENDING = (1 << 0),
FDMON_IO_URING_ADD = (1 << 1),
FDMON_IO_URING_REMOVE = (1 << 2),
};
static inline int poll_events_from_pfd(int pfd_events)
{
return (pfd_events & G_IO_IN ? POLLIN : 0) |
(pfd_events & G_IO_OUT ? POLLOUT : 0) |
(pfd_events & G_IO_HUP ? POLLHUP : 0) |
(pfd_events & G_IO_ERR ? POLLERR : 0);
}
static inline int pfd_events_from_poll(int poll_events)
{
return (poll_events & POLLIN ? G_IO_IN : 0) |
(poll_events & POLLOUT ? G_IO_OUT : 0) |
(poll_events & POLLHUP ? G_IO_HUP : 0) |
(poll_events & POLLERR ? G_IO_ERR : 0);
}
/*
* Returns an sqe for submitting a request. Only be called within
* fdmon_io_uring_wait().
*/
static struct io_uring_sqe *get_sqe(AioContext *ctx)
{
struct io_uring *ring = &ctx->fdmon_io_uring;
struct io_uring_sqe *sqe = io_uring_get_sqe(ring);
int ret;
if (likely(sqe)) {
return sqe;
}
/* No free sqes left, submit pending sqes first */
do {
ret = io_uring_submit(ring);
} while (ret == -EINTR);
assert(ret > 1);
sqe = io_uring_get_sqe(ring);
assert(sqe);
return sqe;
}
/* Atomically enqueue an AioHandler for sq ring submission */
static void enqueue(AioHandlerSList *head, AioHandler *node, unsigned flags)
{
unsigned old_flags;
old_flags = qatomic_fetch_or(&node->flags, FDMON_IO_URING_PENDING | flags);
if (!(old_flags & FDMON_IO_URING_PENDING)) {
QSLIST_INSERT_HEAD_ATOMIC(head, node, node_submitted);
}
}
/* Dequeue an AioHandler for sq ring submission. Called by fill_sq_ring(). */
static AioHandler *dequeue(AioHandlerSList *head, unsigned *flags)
{
AioHandler *node = QSLIST_FIRST(head);
if (!node) {
return NULL;
}
/* Doesn't need to be atomic since fill_sq_ring() moves the list */
QSLIST_REMOVE_HEAD(head, node_submitted);
/*
* Don't clear FDMON_IO_URING_REMOVE. It's sticky so it can serve two
* purposes: telling fill_sq_ring() to submit IORING_OP_POLL_REMOVE and
* telling process_cqe() to delete the AioHandler when its
* IORING_OP_POLL_ADD completes.
*/
*flags = qatomic_fetch_and(&node->flags, ~(FDMON_IO_URING_PENDING |
FDMON_IO_URING_ADD));
return node;
}
static void fdmon_io_uring_update(AioContext *ctx,
AioHandler *old_node,
AioHandler *new_node)
{
if (new_node) {
enqueue(&ctx->submit_list, new_node, FDMON_IO_URING_ADD);
}
if (old_node) {
/*
* Deletion is tricky because IORING_OP_POLL_ADD and
* IORING_OP_POLL_REMOVE are async. We need to wait for the original
* IORING_OP_POLL_ADD to complete before this handler can be freed
* safely.
*
* It's possible that the file descriptor becomes ready and the
* IORING_OP_POLL_ADD cqe is enqueued before IORING_OP_POLL_REMOVE is
* submitted, too.
*
* Mark this handler deleted right now but don't place it on
* ctx->deleted_aio_handlers yet. Instead, manually fudge the list
* entry to make QLIST_IS_INSERTED() think this handler has been
* inserted and other code recognizes this AioHandler as deleted.
*
* Once the original IORING_OP_POLL_ADD completes we enqueue the
* handler on the real ctx->deleted_aio_handlers list to be freed.
*/
assert(!QLIST_IS_INSERTED(old_node, node_deleted));
old_node->node_deleted.le_prev = &old_node->node_deleted.le_next;
enqueue(&ctx->submit_list, old_node, FDMON_IO_URING_REMOVE);
}
}
static void add_poll_add_sqe(AioContext *ctx, AioHandler *node)
{
struct io_uring_sqe *sqe = get_sqe(ctx);
int events = poll_events_from_pfd(node->pfd.events);
io_uring_prep_poll_add(sqe, node->pfd.fd, events);
io_uring_sqe_set_data(sqe, node);
}
static void add_poll_remove_sqe(AioContext *ctx, AioHandler *node)
{
struct io_uring_sqe *sqe = get_sqe(ctx);
io_uring_prep_poll_remove(sqe, node);
}
/* Add a timeout that self-cancels when another cqe becomes ready */
static void add_timeout_sqe(AioContext *ctx, int64_t ns)
{
struct io_uring_sqe *sqe;
struct __kernel_timespec ts = {
.tv_sec = ns / NANOSECONDS_PER_SECOND,
.tv_nsec = ns % NANOSECONDS_PER_SECOND,
};
sqe = get_sqe(ctx);
io_uring_prep_timeout(sqe, &ts, 1, 0);
}
/* Add sqes from ctx->submit_list for submission */
static void fill_sq_ring(AioContext *ctx)
{
AioHandlerSList submit_list;
AioHandler *node;
unsigned flags;
QSLIST_MOVE_ATOMIC(&submit_list, &ctx->submit_list);
while ((node = dequeue(&submit_list, &flags))) {
/* Order matters, just in case both flags were set */
if (flags & FDMON_IO_URING_ADD) {
add_poll_add_sqe(ctx, node);
}
if (flags & FDMON_IO_URING_REMOVE) {
add_poll_remove_sqe(ctx, node);
}
}
}
/* Returns true if a handler became ready */
static bool process_cqe(AioContext *ctx,
AioHandlerList *ready_list,
struct io_uring_cqe *cqe)
{
AioHandler *node = io_uring_cqe_get_data(cqe);
unsigned flags;
/* poll_timeout and poll_remove have a zero user_data field */
if (!node) {
return false;
}
/*
* Deletion can only happen when IORING_OP_POLL_ADD completes. If we race
* with enqueue() here then we can safely clear the FDMON_IO_URING_REMOVE
* bit before IORING_OP_POLL_REMOVE is submitted.
*/
flags = qatomic_fetch_and(&node->flags, ~FDMON_IO_URING_REMOVE);
if (flags & FDMON_IO_URING_REMOVE) {
QLIST_INSERT_HEAD_RCU(&ctx->deleted_aio_handlers, node, node_deleted);
return false;
}
aio_add_ready_handler(ready_list, node, pfd_events_from_poll(cqe->res));
/* IORING_OP_POLL_ADD is one-shot so we must re-arm it */
add_poll_add_sqe(ctx, node);
return true;
}
static int process_cq_ring(AioContext *ctx, AioHandlerList *ready_list)
{
struct io_uring *ring = &ctx->fdmon_io_uring;
struct io_uring_cqe *cqe;
unsigned num_cqes = 0;
unsigned num_ready = 0;
unsigned head;
io_uring_for_each_cqe(ring, head, cqe) {
if (process_cqe(ctx, ready_list, cqe)) {
num_ready++;
}
num_cqes++;
}
io_uring_cq_advance(ring, num_cqes);
return num_ready;
}
static int fdmon_io_uring_wait(AioContext *ctx, AioHandlerList *ready_list,
int64_t timeout)
{
unsigned wait_nr = 1; /* block until at least one cqe is ready */
int ret;
/* Fall back while external clients are disabled */
if (qatomic_read(&ctx->external_disable_cnt)) {
return fdmon_poll_ops.wait(ctx, ready_list, timeout);
}
if (timeout == 0) {
wait_nr = 0; /* non-blocking */
} else if (timeout > 0) {
add_timeout_sqe(ctx, timeout);
}
fill_sq_ring(ctx);
do {
ret = io_uring_submit_and_wait(&ctx->fdmon_io_uring, wait_nr);
} while (ret == -EINTR);
assert(ret >= 0);
return process_cq_ring(ctx, ready_list);
}
static bool fdmon_io_uring_need_wait(AioContext *ctx)
{
/* Have io_uring events completed? */
if (io_uring_cq_ready(&ctx->fdmon_io_uring)) {
return true;
}
/* Are there pending sqes to submit? */
if (io_uring_sq_ready(&ctx->fdmon_io_uring)) {
return true;
}
/* Do we need to process AioHandlers for io_uring changes? */
if (!QSLIST_EMPTY_RCU(&ctx->submit_list)) {
return true;
}
/* Are we falling back to fdmon-poll? */
return qatomic_read(&ctx->external_disable_cnt);
}
static const FDMonOps fdmon_io_uring_ops = {
.update = fdmon_io_uring_update,
.wait = fdmon_io_uring_wait,
.need_wait = fdmon_io_uring_need_wait,
};
bool fdmon_io_uring_setup(AioContext *ctx)
{
int ret;
ret = io_uring_queue_init(FDMON_IO_URING_ENTRIES, &ctx->fdmon_io_uring, 0);
if (ret != 0) {
return false;
}
QSLIST_INIT(&ctx->submit_list);
ctx->fdmon_ops = &fdmon_io_uring_ops;
return true;
}
void fdmon_io_uring_destroy(AioContext *ctx)
{
if (ctx->fdmon_ops == &fdmon_io_uring_ops) {
AioHandler *node;
io_uring_queue_exit(&ctx->fdmon_io_uring);
/* Move handlers due to be removed onto the deleted list */
while ((node = QSLIST_FIRST_RCU(&ctx->submit_list))) {
unsigned flags = qatomic_fetch_and(&node->flags,
~(FDMON_IO_URING_PENDING |
FDMON_IO_URING_ADD |
FDMON_IO_URING_REMOVE));
if (flags & FDMON_IO_URING_REMOVE) {
QLIST_INSERT_HEAD_RCU(&ctx->deleted_aio_handlers, node, node_deleted);
}
QSLIST_REMOVE_HEAD_RCU(&ctx->submit_list, node_submitted);
}
ctx->fdmon_ops = &fdmon_poll_ops;
}
}