qapi/block.json - third_party/qemu - Git at Google

 # -*- Mode: Python -*-
 # vim: filetype=python

 ##
 # = Block devices
 ##

 { 'include': 'block-core.json' }

 ##
 # == Additional block stuff (VM related)
 ##

 ##
 # @BiosAtaTranslation:
 #
 # Policy that BIOS should use to interpret cylinder/head/sector
 # addresses.  Note that Bochs BIOS and SeaBIOS will not actually
 # translate logical CHS to physical; instead, they will use logical
 # block addressing.
 #
 # @auto: If cylinder/heads/sizes are passed, choose between none and LBA
 #        depending on the size of the disk.  If they are not passed,
 #        choose none if QEMU can guess that the disk had 16 or fewer
 #        heads, large if QEMU can guess that the disk had 131072 or
 #        fewer tracks across all heads (i.e. cylinders*heads<131072),
 #        otherwise LBA.
 #
 # @none: The physical disk geometry is equal to the logical geometry.
 #
 # @lba: Assume 63 sectors per track and one of 16, 32, 64, 128 or 255
 #       heads (if fewer than 255 are enough to cover the whole disk
 #       with 1024 cylinders/head).  The number of cylinders/head is
 #       then computed based on the number of sectors and heads.
 #
 # @large: The number of cylinders per head is scaled down to 1024
 #         by correspondingly scaling up the number of heads.
 #
 # @rechs: Same as @large, but first convert a 16-head geometry to
 #         15-head, by proportionally scaling up the number of
 #         cylinders/head.
 #
 # Since: 2.0
 ##
 { 'enum': 'BiosAtaTranslation',
   'data': ['auto', 'none', 'lba', 'large', 'rechs']}

 ##
 # @FloppyDriveType:
 #
 # Type of Floppy drive to be emulated by the Floppy Disk Controller.
 #
 # @144:  1.44MB 3.5" drive
 # @288:  2.88MB 3.5" drive
 # @120:  1.2MB 5.25" drive
 # @none: No drive connected
 # @auto: Automatically determined by inserted media at boot
 #
 # Since: 2.6
 ##
 { 'enum': 'FloppyDriveType',
   'data': ['144', '288', '120', 'none', 'auto']}

 ##
 # @PRManagerInfo:
 #
 # Information about a persistent reservation manager
 #
 # @id: the identifier of the persistent reservation manager
 #
 # @connected: true if the persistent reservation manager is connected to
 #             the underlying storage or helper
 #
 # Since: 3.0
 ##
 { 'struct': 'PRManagerInfo',
   'data': {'id': 'str', 'connected': 'bool'} }

 ##
 # @query-pr-managers:
 #
 # Returns a list of information about each persistent reservation manager.
 #
 # Returns: a list of @PRManagerInfo for each persistent reservation manager
 #
 # Since: 3.0
 ##
 { 'command': 'query-pr-managers', 'returns': ['PRManagerInfo'],
   'allow-preconfig': true }

 ##
 # @eject:
 #
 # Ejects the medium from a removable drive.
 #
 # @device: Block device name
 #
 # @id: The name or QOM path of the guest device (since: 2.8)
 #
 # @force: If true, eject regardless of whether the drive is locked.
 #         If not specified, the default value is false.
 #
 # Features:
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
 # Returns: - Nothing on success
 #          - If @device is not a valid block device, DeviceNotFound
 # Notes:    Ejecting a device with no media results in success
 #
 # Since: 0.14
 #
 # Example:
 #
 # -> { "execute": "eject", "arguments": { "id": "ide1-0-1" } }
 # <- { "return": {} }
 ##
 { 'command': 'eject',
   'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
             '*id': 'str',
             '*force': 'bool' } }

 ##
 # @blockdev-open-tray:
 #
 # Opens a block device's tray. If there is a block driver state tree inserted as
 # a medium, it will become inaccessible to the guest (but it will remain
 # associated to the block device, so closing the tray will make it accessible
 # again).
 #
 # If the tray was already open before, this will be a no-op.
 #
 # Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in
 # which no such event will be generated, these include:
 #
 # - if the guest has locked the tray, @force is false and the guest does not
 #   respond to the eject request
 # - if the BlockBackend denoted by @device does not have a guest device attached
 #   to it
 # - if the guest device does not have an actual tray
 #
 # @device: Block device name
 #
 # @id: The name or QOM path of the guest device (since: 2.8)
 #
 # @force: if false (the default), an eject request will be sent to
 #         the guest if it has locked the tray (and the tray will not be opened
 #         immediately); if true, the tray will be opened regardless of whether
 #         it is locked
 #
 # Features:
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
 # Since: 2.5
 #
 # Example:
 #
 # -> { "execute": "blockdev-open-tray",
 #      "arguments": { "id": "ide0-1-0" } }
 #
 # <- { "timestamp": { "seconds": 1418751016,
 #                     "microseconds": 716996 },
 #      "event": "DEVICE_TRAY_MOVED",
 #      "data": { "device": "ide1-cd0",
 #                "id": "ide0-1-0",
 #                "tray-open": true } }
 #
 # <- { "return": {} }
 #
 ##
 { 'command': 'blockdev-open-tray',
   'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
             '*id': 'str',
             '*force': 'bool' } }

 ##
 # @blockdev-close-tray:
 #
 # Closes a block device's tray. If there is a block driver state tree associated
 # with the block device (which is currently ejected), that tree will be loaded
 # as the medium.
 #
 # If the tray was already closed before, this will be a no-op.
 #
 # @device: Block device name
 #
 # @id: The name or QOM path of the guest device (since: 2.8)
 #
 # Features:
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
 # Since: 2.5
 #
 # Example:
 #
 # -> { "execute": "blockdev-close-tray",
 #      "arguments": { "id": "ide0-1-0" } }
 #
 # <- { "timestamp": { "seconds": 1418751345,
 #                     "microseconds": 272147 },
 #      "event": "DEVICE_TRAY_MOVED",
 #      "data": { "device": "ide1-cd0",
 #                "id": "ide0-1-0",
 #                "tray-open": false } }
 #
 # <- { "return": {} }
 #
 ##
 { 'command': 'blockdev-close-tray',
   'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
             '*id': 'str' } }

 ##
 # @blockdev-remove-medium:
 #
 # Removes a medium (a block driver state tree) from a block device. That block
 # device's tray must currently be open (unless there is no attached guest
 # device).
 #
 # If the tray is open and there is no medium inserted, this will be a no-op.
 #
 # @id: The name or QOM path of the guest device
 #
 # Since: 2.12
 #
 # Example:
 #
 # -> { "execute": "blockdev-remove-medium",
 #      "arguments": { "id": "ide0-1-0" } }
 #
 # <- { "error": { "class": "GenericError",
 #                 "desc": "Tray of device 'ide0-1-0' is not open" } }
 #
 # -> { "execute": "blockdev-open-tray",
 #      "arguments": { "id": "ide0-1-0" } }
 #
 # <- { "timestamp": { "seconds": 1418751627,
 #                     "microseconds": 549958 },
 #      "event": "DEVICE_TRAY_MOVED",
 #      "data": { "device": "ide1-cd0",
 #                "id": "ide0-1-0",
 #                "tray-open": true } }
 #
 # <- { "return": {} }
 #
 # -> { "execute": "blockdev-remove-medium",
 #      "arguments": { "id": "ide0-1-0" } }
 #
 # <- { "return": {} }
 #
 ##
 { 'command': 'blockdev-remove-medium',
   'data': { 'id': 'str' } }

 ##
 # @blockdev-insert-medium:
 #
 # Inserts a medium (a block driver state tree) into a block device. That block
 # device's tray must currently be open (unless there is no attached guest
 # device) and there must be no medium inserted already.
 #
 # @id: The name or QOM path of the guest device
 #
 # @node-name: name of a node in the block driver state graph
 #
 # Since: 2.12
 #
 # Example:
 #
 # -> { "execute": "blockdev-add",
 #      "arguments": {
 #          "node-name": "node0",
 #          "driver": "raw",
 #          "file": { "driver": "file",
 #                    "filename": "fedora.iso" } } }
 # <- { "return": {} }
 #
 # -> { "execute": "blockdev-insert-medium",
 #      "arguments": { "id": "ide0-1-0",
 #                     "node-name": "node0" } }
 #
 # <- { "return": {} }
 #
 ##
 { 'command': 'blockdev-insert-medium',
   'data': { 'id': 'str',
             'node-name': 'str'} }


 ##
 # @BlockdevChangeReadOnlyMode:
 #
 # Specifies the new read-only mode of a block device subject to the
 # @blockdev-change-medium command.
 #
 # @retain: Retains the current read-only mode
 #
 # @read-only: Makes the device read-only
 #
 # @read-write: Makes the device writable
 #
 # Since: 2.3
 #
 ##
 { 'enum': 'BlockdevChangeReadOnlyMode',
   'data': ['retain', 'read-only', 'read-write'] }


 ##
 # @blockdev-change-medium:
 #
 # Changes the medium inserted into a block device by ejecting the current medium
 # and loading a new image file which is inserted as the new medium (this command
 # combines blockdev-open-tray, blockdev-remove-medium, blockdev-insert-medium
 # and blockdev-close-tray).
 #
 # @device: Block device name
 #
 # @id: The name or QOM path of the guest device
 #      (since: 2.8)
 #
 # @filename: filename of the new image to be loaded
 #
 # @format: format to open the new image with (defaults to
 #          the probed format)
 #
 # @read-only-mode: change the read-only mode of the device; defaults
 #                  to 'retain'
 #
 # Features:
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
 # Since: 2.5
 #
 # Examples:
 #
 # 1. Change a removable medium
 #
 # -> { "execute": "blockdev-change-medium",
 #      "arguments": { "id": "ide0-1-0",
 #                     "filename": "/srv/images/Fedora-12-x86_64-DVD.iso",
 #                     "format": "raw" } }
 # <- { "return": {} }
 #
 # 2. Load a read-only medium into a writable drive
 #
 # -> { "execute": "blockdev-change-medium",
 #      "arguments": { "id": "floppyA",
 #                     "filename": "/srv/images/ro.img",
 #                     "format": "raw",
 #                     "read-only-mode": "retain" } }
 #
 # <- { "error":
 #      { "class": "GenericError",
 #        "desc": "Could not open '/srv/images/ro.img': Permission denied" } }
 #
 # -> { "execute": "blockdev-change-medium",
 #      "arguments": { "id": "floppyA",
 #                     "filename": "/srv/images/ro.img",
 #                     "format": "raw",
 #                     "read-only-mode": "read-only" } }
 #
 # <- { "return": {} }
 #
 ##
 { 'command': 'blockdev-change-medium',
   'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
             '*id': 'str',
             'filename': 'str',
             '*format': 'str',
             '*read-only-mode': 'BlockdevChangeReadOnlyMode' } }


 ##
 # @DEVICE_TRAY_MOVED:
 #
 # Emitted whenever the tray of a removable device is moved by the guest or by
 # HMP/QMP commands
 #
 # @device: Block device name. This is always present for compatibility
 #          reasons, but it can be empty ("") if the image does not
 #          have a device name associated.
 #
 # @id: The name or QOM path of the guest device (since 2.8)
 #
 # @tray-open: true if the tray has been opened or false if it has been closed
 #
 # Since: 1.1
 #
 # Example:
 #
 # <- { "event": "DEVICE_TRAY_MOVED",
 #      "data": { "device": "ide1-cd0",
 #                "id": "/machine/unattached/device[22]",
 #                "tray-open": true
 #      },
 #      "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
 #
 ##
 { 'event': 'DEVICE_TRAY_MOVED',
   'data': { 'device': 'str', 'id': 'str', 'tray-open': 'bool' } }

 ##
 # @PR_MANAGER_STATUS_CHANGED:
 #
 # Emitted whenever the connected status of a persistent reservation
 # manager changes.
 #
 # @id: The id of the PR manager object
 #
 # @connected: true if the PR manager is connected to a backend
 #
 # Since: 3.0
 #
 # Example:
 #
 # <- { "event": "PR_MANAGER_STATUS_CHANGED",
 #      "data": { "id": "pr-helper0",
 #                "connected": true
 #      },
 #      "timestamp": { "seconds": 1519840375, "microseconds": 450486 } }
 #
 ##
 { 'event': 'PR_MANAGER_STATUS_CHANGED',
   'data': { 'id': 'str', 'connected': 'bool' } }

 ##
 # @block_set_io_throttle:
 #
 # Change I/O throttle limits for a block drive.
 #
 # Since QEMU 2.4, each device with I/O limits is member of a throttle
 # group.
 #
 # If two or more devices are members of the same group, the limits
 # will apply to the combined I/O of the whole group in a round-robin
 # fashion. Therefore, setting new I/O limits to a device will affect
 # the whole group.
 #
 # The name of the group can be specified using the 'group' parameter.
 # If the parameter is unset, it is assumed to be the current group of
 # that device. If it's not in any group yet, the name of the device
 # will be used as the name for its group.
 #
 # The 'group' parameter can also be used to move a device to a
 # different group. In this case the limits specified in the parameters
 # will be applied to the new group only.
 #
 # I/O limits can be disabled by setting all of them to 0. In this case
 # the device will be removed from its group and the rest of its
 # members will not be affected. The 'group' parameter is ignored.
 #
 # Returns: - Nothing on success
 #          - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 1.1
 #
 # Example:
 #
 # -> { "execute": "block_set_io_throttle",
 #      "arguments": { "id": "virtio-blk-pci0/virtio-backend",
 #                     "bps": 0,
 #                     "bps_rd": 0,
 #                     "bps_wr": 0,
 #                     "iops": 512,
 #                     "iops_rd": 0,
 #                     "iops_wr": 0,
 #                     "bps_max": 0,
 #                     "bps_rd_max": 0,
 #                     "bps_wr_max": 0,
 #                     "iops_max": 0,
 #                     "iops_rd_max": 0,
 #                     "iops_wr_max": 0,
 #                     "bps_max_length": 0,
 #                     "iops_size": 0 } }
 # <- { "return": {} }
 #
 # -> { "execute": "block_set_io_throttle",
 #      "arguments": { "id": "ide0-1-0",
 #                     "bps": 1000000,
 #                     "bps_rd": 0,
 #                     "bps_wr": 0,
 #                     "iops": 0,
 #                     "iops_rd": 0,
 #                     "iops_wr": 0,
 #                     "bps_max": 8000000,
 #                     "bps_rd_max": 0,
 #                     "bps_wr_max": 0,
 #                     "iops_max": 0,
 #                     "iops_rd_max": 0,
 #                     "iops_wr_max": 0,
 #                     "bps_max_length": 60,
 #                     "iops_size": 0 } }
 # <- { "return": {} }
 ##
 { 'command': 'block_set_io_throttle', 'boxed': true,
   'data': 'BlockIOThrottle' }

 ##
 # @block-latency-histogram-set:
 #
 # Manage read, write and flush latency histograms for the device.
 #
 # If only @id parameter is specified, remove all present latency histograms
 # for the device. Otherwise, add/reset some of (or all) latency histograms.
 #
 # @id: The name or QOM path of the guest device.
 #
 # @boundaries: list of interval boundary values (see description in
 #              BlockLatencyHistogramInfo definition). If specified, all
 #              latency histograms are removed, and empty ones created for all
 #              io types with intervals corresponding to @boundaries (except for
 #              io types, for which specific boundaries are set through the
 #              following parameters).
 #
 # @boundaries-read: list of interval boundary values for read latency
 #                   histogram. If specified, old read latency histogram is
 #                   removed, and empty one created with intervals
 #                   corresponding to @boundaries-read. The parameter has higher
 #                   priority then @boundaries.
 #
 # @boundaries-write: list of interval boundary values for write latency
 #                    histogram.
 #
 # @boundaries-flush: list of interval boundary values for flush latency
 #                    histogram.
 #
 # Returns: error if device is not found or any boundary arrays are invalid.
 #
 # Since: 4.0
 #
 # Example:
 # set new histograms for all io types with intervals
 # [0, 10), [10, 50), [50, 100), [100, +inf):
 #
 # -> { "execute": "block-latency-histogram-set",
 #      "arguments": { "id": "drive0",
 #                     "boundaries": [10, 50, 100] } }
 # <- { "return": {} }
 #
 # Example:
 # set new histogram only for write, other histograms will remain
 # not changed (or not created):
 #
 # -> { "execute": "block-latency-histogram-set",
 #      "arguments": { "id": "drive0",
 #                     "boundaries-write": [10, 50, 100] } }
 # <- { "return": {} }
 #
 # Example:
 # set new histograms with the following intervals:
 #   read, flush: [0, 10), [10, 50), [50, 100), [100, +inf)
 #   write: [0, 1000), [1000, 5000), [5000, +inf)
 #
 # -> { "execute": "block-latency-histogram-set",
 #      "arguments": { "id": "drive0",
 #                     "boundaries": [10, 50, 100],
 #                     "boundaries-write": [1000, 5000] } }
 # <- { "return": {} }
 #
 # Example:
 # remove all latency histograms:
 #
 # -> { "execute": "block-latency-histogram-set",
 #      "arguments": { "id": "drive0" } }
 # <- { "return": {} }
 ##
 { 'command': 'block-latency-histogram-set',
   'data': {'id': 'str',
            '*boundaries': ['uint64'],
            '*boundaries-read': ['uint64'],
            '*boundaries-write': ['uint64'],
            '*boundaries-flush': ['uint64'] } }
	# -- Mode: Python --
	# vim: filetype=python

	##
	# = Block devices
	##

	{ 'include': 'block-core.json' }

	##
	# == Additional block stuff (VM related)
	##

	##
	# @BiosAtaTranslation:
	#
	# Policy that BIOS should use to interpret cylinder/head/sector
	# addresses. Note that Bochs BIOS and SeaBIOS will not actually
	# translate logical CHS to physical; instead, they will use logical
	# block addressing.
	#
	# @auto: If cylinder/heads/sizes are passed, choose between none and LBA
	# depending on the size of the disk. If they are not passed,
	# choose none if QEMU can guess that the disk had 16 or fewer
	# heads, large if QEMU can guess that the disk had 131072 or
	# fewer tracks across all heads (i.e. cylinders*heads<131072),
	# otherwise LBA.
	#
	# @none: The physical disk geometry is equal to the logical geometry.
	#
	# @lba: Assume 63 sectors per track and one of 16, 32, 64, 128 or 255
	# heads (if fewer than 255 are enough to cover the whole disk
	# with 1024 cylinders/head). The number of cylinders/head is
	# then computed based on the number of sectors and heads.
	#
	# @large: The number of cylinders per head is scaled down to 1024
	# by correspondingly scaling up the number of heads.
	#
	# @rechs: Same as @large, but first convert a 16-head geometry to
	# 15-head, by proportionally scaling up the number of
	# cylinders/head.
	#
	# Since: 2.0
	##
	{ 'enum': 'BiosAtaTranslation',
	'data': ['auto', 'none', 'lba', 'large', 'rechs']}

	##
	# @FloppyDriveType:
	#
	# Type of Floppy drive to be emulated by the Floppy Disk Controller.
	#
	# @144: 1.44MB 3.5" drive
	# @288: 2.88MB 3.5" drive
	# @120: 1.2MB 5.25" drive
	# @none: No drive connected
	# @auto: Automatically determined by inserted media at boot
	#
	# Since: 2.6
	##
	{ 'enum': 'FloppyDriveType',
	'data': ['144', '288', '120', 'none', 'auto']}

	##
	# @PRManagerInfo:
	#
	# Information about a persistent reservation manager
	#
	# @id: the identifier of the persistent reservation manager
	#
	# @connected: true if the persistent reservation manager is connected to
	# the underlying storage or helper
	#
	# Since: 3.0
	##
	{ 'struct': 'PRManagerInfo',
	'data': {'id': 'str', 'connected': 'bool'} }

	##
	# @query-pr-managers:
	#
	# Returns a list of information about each persistent reservation manager.
	#
	# Returns: a list of @PRManagerInfo for each persistent reservation manager
	#
	# Since: 3.0
	##
	{ 'command': 'query-pr-managers', 'returns': ['PRManagerInfo'],
	'allow-preconfig': true }

	##
	# @eject:
	#
	# Ejects the medium from a removable drive.
	#
	# @device: Block device name
	#
	# @id: The name or QOM path of the guest device (since: 2.8)
	#
	# @force: If true, eject regardless of whether the drive is locked.
	# If not specified, the default value is false.
	#
	# Features:
	# @deprecated: Member @device is deprecated. Use @id instead.
	#
	# Returns: - Nothing on success
	# - If @device is not a valid block device, DeviceNotFound
	# Notes: Ejecting a device with no media results in success
	#
	# Since: 0.14
	#
	# Example:
	#
	# -> { "execute": "eject", "arguments": { "id": "ide1-0-1" } }
	# <- { "return": {} }
	##
	{ 'command': 'eject',
	'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
	'*id': 'str',
	'*force': 'bool' } }

	##
	# @blockdev-open-tray:
	#
	# Opens a block device's tray. If there is a block driver state tree inserted as
	# a medium, it will become inaccessible to the guest (but it will remain
	# associated to the block device, so closing the tray will make it accessible
	# again).
	#
	# If the tray was already open before, this will be a no-op.
	#
	# Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in
	# which no such event will be generated, these include:
	#
	# - if the guest has locked the tray, @force is false and the guest does not
	# respond to the eject request
	# - if the BlockBackend denoted by @device does not have a guest device attached
	# to it
	# - if the guest device does not have an actual tray
	#
	# @device: Block device name
	#
	# @id: The name or QOM path of the guest device (since: 2.8)
	#
	# @force: if false (the default), an eject request will be sent to
	# the guest if it has locked the tray (and the tray will not be opened
	# immediately); if true, the tray will be opened regardless of whether
	# it is locked
	#
	# Features:
	# @deprecated: Member @device is deprecated. Use @id instead.
	#
	# Since: 2.5
	#
	# Example:
	#
	# -> { "execute": "blockdev-open-tray",
	# "arguments": { "id": "ide0-1-0" } }
	#
	# <- { "timestamp": { "seconds": 1418751016,
	# "microseconds": 716996 },
	# "event": "DEVICE_TRAY_MOVED",
	# "data": { "device": "ide1-cd0",
	# "id": "ide0-1-0",
	# "tray-open": true } }
	#
	# <- { "return": {} }
	#
	##
	{ 'command': 'blockdev-open-tray',
	'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
	'*id': 'str',
	'*force': 'bool' } }

	##
	# @blockdev-close-tray:
	#
	# Closes a block device's tray. If there is a block driver state tree associated
	# with the block device (which is currently ejected), that tree will be loaded
	# as the medium.
	#
	# If the tray was already closed before, this will be a no-op.
	#
	# @device: Block device name
	#
	# @id: The name or QOM path of the guest device (since: 2.8)
	#
	# Features:
	# @deprecated: Member @device is deprecated. Use @id instead.
	#
	# Since: 2.5
	#
	# Example:
	#
	# -> { "execute": "blockdev-close-tray",
	# "arguments": { "id": "ide0-1-0" } }
	#
	# <- { "timestamp": { "seconds": 1418751345,
	# "microseconds": 272147 },
	# "event": "DEVICE_TRAY_MOVED",
	# "data": { "device": "ide1-cd0",
	# "id": "ide0-1-0",
	# "tray-open": false } }
	#
	# <- { "return": {} }
	#
	##
	{ 'command': 'blockdev-close-tray',
	'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
	'*id': 'str' } }

	##
	# @blockdev-remove-medium:
	#
	# Removes a medium (a block driver state tree) from a block device. That block
	# device's tray must currently be open (unless there is no attached guest
	# device).
	#
	# If the tray is open and there is no medium inserted, this will be a no-op.
	#
	# @id: The name or QOM path of the guest device
	#
	# Since: 2.12
	#
	# Example:
	#
	# -> { "execute": "blockdev-remove-medium",
	# "arguments": { "id": "ide0-1-0" } }
	#
	# <- { "error": { "class": "GenericError",
	# "desc": "Tray of device 'ide0-1-0' is not open" } }
	#
	# -> { "execute": "blockdev-open-tray",
	# "arguments": { "id": "ide0-1-0" } }
	#
	# <- { "timestamp": { "seconds": 1418751627,
	# "microseconds": 549958 },
	# "event": "DEVICE_TRAY_MOVED",
	# "data": { "device": "ide1-cd0",
	# "id": "ide0-1-0",
	# "tray-open": true } }
	#
	# <- { "return": {} }
	#
	# -> { "execute": "blockdev-remove-medium",
	# "arguments": { "id": "ide0-1-0" } }
	#
	# <- { "return": {} }
	#
	##
	{ 'command': 'blockdev-remove-medium',
	'data': { 'id': 'str' } }

	##
	# @blockdev-insert-medium:
	#
	# Inserts a medium (a block driver state tree) into a block device. That block
	# device's tray must currently be open (unless there is no attached guest
	# device) and there must be no medium inserted already.
	#
	# @id: The name or QOM path of the guest device
	#
	# @node-name: name of a node in the block driver state graph
	#
	# Since: 2.12
	#
	# Example:
	#
	# -> { "execute": "blockdev-add",
	# "arguments": {
	# "node-name": "node0",
	# "driver": "raw",
	# "file": { "driver": "file",
	# "filename": "fedora.iso" } } }
	# <- { "return": {} }
	#
	# -> { "execute": "blockdev-insert-medium",
	# "arguments": { "id": "ide0-1-0",
	# "node-name": "node0" } }
	#
	# <- { "return": {} }
	#
	##
	{ 'command': 'blockdev-insert-medium',
	'data': { 'id': 'str',
	'node-name': 'str'} }


	##
	# @BlockdevChangeReadOnlyMode:
	#
	# Specifies the new read-only mode of a block device subject to the
	# @blockdev-change-medium command.
	#
	# @retain: Retains the current read-only mode
	#
	# @read-only: Makes the device read-only
	#
	# @read-write: Makes the device writable
	#
	# Since: 2.3
	#
	##
	{ 'enum': 'BlockdevChangeReadOnlyMode',
	'data': ['retain', 'read-only', 'read-write'] }


	##
	# @blockdev-change-medium:
	#
	# Changes the medium inserted into a block device by ejecting the current medium
	# and loading a new image file which is inserted as the new medium (this command
	# combines blockdev-open-tray, blockdev-remove-medium, blockdev-insert-medium
	# and blockdev-close-tray).
	#
	# @device: Block device name
	#
	# @id: The name or QOM path of the guest device
	# (since: 2.8)
	#
	# @filename: filename of the new image to be loaded
	#
	# @format: format to open the new image with (defaults to
	# the probed format)
	#
	# @read-only-mode: change the read-only mode of the device; defaults
	# to 'retain'
	#
	# Features:
	# @deprecated: Member @device is deprecated. Use @id instead.
	#
	# Since: 2.5
	#
	# Examples:
	#
	# 1. Change a removable medium
	#
	# -> { "execute": "blockdev-change-medium",
	# "arguments": { "id": "ide0-1-0",
	# "filename": "/srv/images/Fedora-12-x86_64-DVD.iso",
	# "format": "raw" } }
	# <- { "return": {} }
	#
	# 2. Load a read-only medium into a writable drive
	#
	# -> { "execute": "blockdev-change-medium",
	# "arguments": { "id": "floppyA",
	# "filename": "/srv/images/ro.img",
	# "format": "raw",
	# "read-only-mode": "retain" } }
	#
	# <- { "error":
	# { "class": "GenericError",
	# "desc": "Could not open '/srv/images/ro.img': Permission denied" } }
	#
	# -> { "execute": "blockdev-change-medium",
	# "arguments": { "id": "floppyA",
	# "filename": "/srv/images/ro.img",
	# "format": "raw",
	# "read-only-mode": "read-only" } }
	#
	# <- { "return": {} }
	#
	##
	{ 'command': 'blockdev-change-medium',
	'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] },
	'*id': 'str',
	'filename': 'str',
	'*format': 'str',
	'*read-only-mode': 'BlockdevChangeReadOnlyMode' } }


	##
	# @DEVICE_TRAY_MOVED:
	#
	# Emitted whenever the tray of a removable device is moved by the guest or by
	# HMP/QMP commands
	#
	# @device: Block device name. This is always present for compatibility
	# reasons, but it can be empty ("") if the image does not
	# have a device name associated.
	#
	# @id: The name or QOM path of the guest device (since 2.8)
	#
	# @tray-open: true if the tray has been opened or false if it has been closed
	#
	# Since: 1.1
	#
	# Example:
	#
	# <- { "event": "DEVICE_TRAY_MOVED",
	# "data": { "device": "ide1-cd0",
	# "id": "/machine/unattached/device[22]",
	# "tray-open": true
	# },
	# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
	#
	##
	{ 'event': 'DEVICE_TRAY_MOVED',
	'data': { 'device': 'str', 'id': 'str', 'tray-open': 'bool' } }

	##
	# @PR_MANAGER_STATUS_CHANGED:
	#
	# Emitted whenever the connected status of a persistent reservation
	# manager changes.
	#
	# @id: The id of the PR manager object
	#
	# @connected: true if the PR manager is connected to a backend
	#
	# Since: 3.0
	#
	# Example:
	#
	# <- { "event": "PR_MANAGER_STATUS_CHANGED",
	# "data": { "id": "pr-helper0",
	# "connected": true
	# },
	# "timestamp": { "seconds": 1519840375, "microseconds": 450486 } }
	#
	##
	{ 'event': 'PR_MANAGER_STATUS_CHANGED',
	'data': { 'id': 'str', 'connected': 'bool' } }

	##
	# @block_set_io_throttle:
	#
	# Change I/O throttle limits for a block drive.
	#
	# Since QEMU 2.4, each device with I/O limits is member of a throttle
	# group.
	#
	# If two or more devices are members of the same group, the limits
	# will apply to the combined I/O of the whole group in a round-robin
	# fashion. Therefore, setting new I/O limits to a device will affect
	# the whole group.
	#
	# The name of the group can be specified using the 'group' parameter.
	# If the parameter is unset, it is assumed to be the current group of
	# that device. If it's not in any group yet, the name of the device
	# will be used as the name for its group.
	#
	# The 'group' parameter can also be used to move a device to a
	# different group. In this case the limits specified in the parameters
	# will be applied to the new group only.
	#
	# I/O limits can be disabled by setting all of them to 0. In this case
	# the device will be removed from its group and the rest of its
	# members will not be affected. The 'group' parameter is ignored.
	#
	# Returns: - Nothing on success
	# - If @device is not a valid block device, DeviceNotFound
	#
	# Since: 1.1
	#
	# Example:
	#
	# -> { "execute": "block_set_io_throttle",
	# "arguments": { "id": "virtio-blk-pci0/virtio-backend",
	# "bps": 0,
	# "bps_rd": 0,
	# "bps_wr": 0,
	# "iops": 512,
	# "iops_rd": 0,
	# "iops_wr": 0,
	# "bps_max": 0,
	# "bps_rd_max": 0,
	# "bps_wr_max": 0,
	# "iops_max": 0,
	# "iops_rd_max": 0,
	# "iops_wr_max": 0,
	# "bps_max_length": 0,
	# "iops_size": 0 } }
	# <- { "return": {} }
	#
	# -> { "execute": "block_set_io_throttle",
	# "arguments": { "id": "ide0-1-0",
	# "bps": 1000000,
	# "bps_rd": 0,
	# "bps_wr": 0,
	# "iops": 0,
	# "iops_rd": 0,
	# "iops_wr": 0,
	# "bps_max": 8000000,
	# "bps_rd_max": 0,
	# "bps_wr_max": 0,
	# "iops_max": 0,
	# "iops_rd_max": 0,
	# "iops_wr_max": 0,
	# "bps_max_length": 60,
	# "iops_size": 0 } }
	# <- { "return": {} }
	##
	{ 'command': 'block_set_io_throttle', 'boxed': true,
	'data': 'BlockIOThrottle' }

	##
	# @block-latency-histogram-set:
	#
	# Manage read, write and flush latency histograms for the device.
	#
	# If only @id parameter is specified, remove all present latency histograms
	# for the device. Otherwise, add/reset some of (or all) latency histograms.
	#
	# @id: The name or QOM path of the guest device.
	#
	# @boundaries: list of interval boundary values (see description in
	# BlockLatencyHistogramInfo definition). If specified, all
	# latency histograms are removed, and empty ones created for all
	# io types with intervals corresponding to @boundaries (except for
	# io types, for which specific boundaries are set through the
	# following parameters).
	#
	# @boundaries-read: list of interval boundary values for read latency
	# histogram. If specified, old read latency histogram is
	# removed, and empty one created with intervals
	# corresponding to @boundaries-read. The parameter has higher
	# priority then @boundaries.
	#
	# @boundaries-write: list of interval boundary values for write latency
	# histogram.
	#
	# @boundaries-flush: list of interval boundary values for flush latency
	# histogram.
	#
	# Returns: error if device is not found or any boundary arrays are invalid.
	#
	# Since: 4.0
	#
	# Example:
	# set new histograms for all io types with intervals
	# [0, 10), [10, 50), [50, 100), [100, +inf):
	#
	# -> { "execute": "block-latency-histogram-set",
	# "arguments": { "id": "drive0",
	# "boundaries": [10, 50, 100] } }
	# <- { "return": {} }
	#
	# Example:
	# set new histogram only for write, other histograms will remain
	# not changed (or not created):
	#
	# -> { "execute": "block-latency-histogram-set",
	# "arguments": { "id": "drive0",
	# "boundaries-write": [10, 50, 100] } }
	# <- { "return": {} }
	#
	# Example:
	# set new histograms with the following intervals:
	# read, flush: [0, 10), [10, 50), [50, 100), [100, +inf)
	# write: [0, 1000), [1000, 5000), [5000, +inf)
	#
	# -> { "execute": "block-latency-histogram-set",
	# "arguments": { "id": "drive0",
	# "boundaries": [10, 50, 100],
	# "boundaries-write": [1000, 5000] } }
	# <- { "return": {} }
	#
	# Example:
	# remove all latency histograms:
	#
	# -> { "execute": "block-latency-histogram-set",
	# "arguments": { "id": "drive0" } }
	# <- { "return": {} }
	##
	{ 'command': 'block-latency-histogram-set',
	'data': {'id': 'str',
	'*boundaries': ['uint64'],
	'*boundaries-read': ['uint64'],
	'*boundaries-write': ['uint64'],
	'*boundaries-flush': ['uint64'] } }