/*
 *  QEMU model of the Milkymist SD Card Controller.
 *
 *  Copyright (c) 2010 Michael Walle <michael@walle.cc>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
 *
 *
 * Specification available at:
 *   http://www.milkymist.org/socdoc/memcard.pdf
 */

#include "hw.h"
#include "sysbus.h"
#include "sysemu.h"
#include "trace.h"
#include "qemu-error.h"
#include "blockdev.h"
#include "sd.h"

enum {
    ENABLE_CMD_TX   = (1<<0),
    ENABLE_CMD_RX   = (1<<1),
    ENABLE_DAT_TX   = (1<<2),
    ENABLE_DAT_RX   = (1<<3),
};

enum {
    PENDING_CMD_TX   = (1<<0),
    PENDING_CMD_RX   = (1<<1),
    PENDING_DAT_TX   = (1<<2),
    PENDING_DAT_RX   = (1<<3),
};

enum {
    START_CMD_TX    = (1<<0),
    START_DAT_RX    = (1<<1),
};

enum {
    R_CLK2XDIV = 0,
    R_ENABLE,
    R_PENDING,
    R_START,
    R_CMD,
    R_DAT,
    R_MAX
};

struct MilkymistMemcardState {
    SysBusDevice busdev;
    SDState *card;

    int command_write_ptr;
    int response_read_ptr;
    int response_len;
    int ignore_next_cmd;
    int enabled;
    uint8_t command[6];
    uint8_t response[17];
    uint32_t regs[R_MAX];
};
typedef struct MilkymistMemcardState MilkymistMemcardState;

static void update_pending_bits(MilkymistMemcardState *s)
{
    /* transmits are instantaneous, thus tx pending bits are never set */
    s->regs[R_PENDING] = 0;
    /* if rx is enabled the corresponding pending bits are always set */
    if (s->regs[R_ENABLE] & ENABLE_CMD_RX) {
        s->regs[R_PENDING] |= PENDING_CMD_RX;
    }
    if (s->regs[R_ENABLE] & ENABLE_DAT_RX) {
        s->regs[R_PENDING] |= PENDING_DAT_RX;
    }
}

static void memcard_sd_command(MilkymistMemcardState *s)
{
    SDRequest req;

    req.cmd = s->command[0] & 0x3f;
    req.arg = (s->command[1] << 24) | (s->command[2] << 16)
              | (s->command[3] << 8) | s->command[4];
    req.crc = s->command[5];

    s->response[0] = req.cmd;
    s->response_len = sd_do_command(s->card, &req, s->response+1);
    s->response_read_ptr = 0;

    if (s->response_len == 16) {
        /* R2 response */
        s->response[0] = 0x3f;
        s->response_len += 1;
    } else if (s->response_len == 4) {
        /* no crc calculation, insert dummy byte */
        s->response[5] = 0;
        s->response_len += 2;
    }

    if (req.cmd == 0) {
        /* next write is a dummy byte to clock the initialization of the sd
         * card */
        s->ignore_next_cmd = 1;
    }
}

static uint32_t memcard_read(void *opaque, target_phys_addr_t addr)
{
    MilkymistMemcardState *s = opaque;
    uint32_t r = 0;

    addr >>= 2;
    switch (addr) {
    case R_CMD:
        if (!s->enabled) {
            r = 0xff;
        } else {
            r = s->response[s->response_read_ptr++];
            if (s->response_read_ptr > s->response_len) {
                error_report("milkymist_memcard: "
                        "read more cmd bytes than available. Clipping.");
                s->response_read_ptr = 0;
            }
        }
        break;
    case R_DAT:
        if (!s->enabled) {
            r = 0xffffffff;
        } else {
            r = 0;
            r |= sd_read_data(s->card) << 24;
            r |= sd_read_data(s->card) << 16;
            r |= sd_read_data(s->card) << 8;
            r |= sd_read_data(s->card);
        }
        break;
    case R_CLK2XDIV:
    case R_ENABLE:
    case R_PENDING:
    case R_START:
        r = s->regs[addr];
        break;

    default:
        error_report("milkymist_memcard: read access to unknown register 0x"
                TARGET_FMT_plx, addr << 2);
        break;
    }

    trace_milkymist_memcard_memory_read(addr << 2, r);

    return r;
}

static void memcard_write(void *opaque, target_phys_addr_t addr, uint32_t value)
{
    MilkymistMemcardState *s = opaque;

    trace_milkymist_memcard_memory_write(addr, value);

    addr >>= 2;
    switch (addr) {
    case R_PENDING:
        /* clear rx pending bits */
        s->regs[R_PENDING] &= ~(value & (PENDING_CMD_RX | PENDING_DAT_RX));
        update_pending_bits(s);
        break;
    case R_CMD:
        if (!s->enabled) {
            break;
        }
        if (s->ignore_next_cmd) {
            s->ignore_next_cmd = 0;
            break;
        }
        s->command[s->command_write_ptr] = value & 0xff;
        s->command_write_ptr = (s->command_write_ptr + 1) % 6;
        if (s->command_write_ptr == 0) {
            memcard_sd_command(s);
        }
        break;
    case R_DAT:
        if (!s->enabled) {
            break;
        }
        sd_write_data(s->card, (value >> 24) & 0xff);
        sd_write_data(s->card, (value >> 16) & 0xff);
        sd_write_data(s->card, (value >> 8) & 0xff);
        sd_write_data(s->card, value & 0xff);
        break;
    case R_ENABLE:
        s->regs[addr] = value;
        update_pending_bits(s);
        break;
    case R_CLK2XDIV:
    case R_START:
        s->regs[addr] = value;
        break;

    default:
        error_report("milkymist_memcard: write access to unknown register 0x"
                TARGET_FMT_plx, addr << 2);
        break;
    }
}

static CPUReadMemoryFunc * const memcard_read_fn[] = {
    NULL,
    NULL,
    &memcard_read,
};

static CPUWriteMemoryFunc * const memcard_write_fn[] = {
    NULL,
    NULL,
    &memcard_write,
};

static void milkymist_memcard_reset(DeviceState *d)
{
    MilkymistMemcardState *s =
            container_of(d, MilkymistMemcardState, busdev.qdev);
    int i;

    s->command_write_ptr = 0;
    s->response_read_ptr = 0;
    s->response_len = 0;

    for (i = 0; i < R_MAX; i++) {
        s->regs[i] = 0;
    }
}

static int milkymist_memcard_init(SysBusDevice *dev)
{
    MilkymistMemcardState *s = FROM_SYSBUS(typeof(*s), dev);
    DriveInfo *dinfo;
    int memcard_regs;

    dinfo = drive_get_next(IF_SD);
    s->card = sd_init(dinfo ? dinfo->bdrv : NULL, 0);
    s->enabled = dinfo ? bdrv_is_inserted(dinfo->bdrv) : 0;

    memcard_regs = cpu_register_io_memory(memcard_read_fn, memcard_write_fn, s,
            DEVICE_NATIVE_ENDIAN);
    sysbus_init_mmio(dev, R_MAX * 4, memcard_regs);

    return 0;
}

static const VMStateDescription vmstate_milkymist_memcard = {
    .name = "milkymist-memcard",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields      = (VMStateField[]) {
        VMSTATE_INT32(command_write_ptr, MilkymistMemcardState),
        VMSTATE_INT32(response_read_ptr, MilkymistMemcardState),
        VMSTATE_INT32(response_len, MilkymistMemcardState),
        VMSTATE_INT32(ignore_next_cmd, MilkymistMemcardState),
        VMSTATE_INT32(enabled, MilkymistMemcardState),
        VMSTATE_UINT8_ARRAY(command, MilkymistMemcardState, 6),
        VMSTATE_UINT8_ARRAY(response, MilkymistMemcardState, 17),
        VMSTATE_UINT32_ARRAY(regs, MilkymistMemcardState, R_MAX),
        VMSTATE_END_OF_LIST()
    }
};

static SysBusDeviceInfo milkymist_memcard_info = {
    .init = milkymist_memcard_init,
    .qdev.name  = "milkymist-memcard",
    .qdev.size  = sizeof(MilkymistMemcardState),
    .qdev.vmsd  = &vmstate_milkymist_memcard,
    .qdev.reset = milkymist_memcard_reset,
};

static void milkymist_memcard_register(void)
{
    sysbus_register_withprop(&milkymist_memcard_info);
}

device_init(milkymist_memcard_register)