qapi/crypto.json - third_party/qemu - Git at Google

 # -*- Mode: Python -*-
 # vim: filetype=python
 #

 ##
 # = Cryptography
 ##

 ##
 # @QCryptoTLSCredsEndpoint:
 #
 # The type of network endpoint that will be using the credentials.
 # Most types of credential require different setup / structures
 # depending on whether they will be used in a server versus a
 # client.
 #
 # @client: the network endpoint is acting as the client
 #
 # @server: the network endpoint is acting as the server
 #
 # Since: 2.5
 ##
 { 'enum': 'QCryptoTLSCredsEndpoint',
   'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
   'data': ['client', 'server']}

 ##
 # @QCryptoSecretFormat:
 #
 # The data format that the secret is provided in
 #
 # @raw: raw bytes. When encoded in JSON only valid UTF-8 sequences can be used
 # @base64: arbitrary base64 encoded binary data
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoSecretFormat',
   'prefix': 'QCRYPTO_SECRET_FORMAT',
   'data': ['raw', 'base64']}

 ##
 # @QCryptoHashAlgorithm:
 #
 # The supported algorithms for computing content digests
 #
 # @md5: MD5. Should not be used in any new code, legacy compat only
 # @sha1: SHA-1. Should not be used in any new code, legacy compat only
 # @sha224: SHA-224. (since 2.7)
 # @sha256: SHA-256. Current recommended strong hash.
 # @sha384: SHA-384. (since 2.7)
 # @sha512: SHA-512. (since 2.7)
 # @ripemd160: RIPEMD-160. (since 2.7)
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoHashAlgorithm',
   'prefix': 'QCRYPTO_HASH_ALG',
   'data': ['md5', 'sha1', 'sha224', 'sha256', 'sha384', 'sha512', 'ripemd160']}

 ##
 # @QCryptoCipherAlgorithm:
 #
 # The supported algorithms for content encryption ciphers
 #
 # @aes-128: AES with 128 bit / 16 byte keys
 # @aes-192: AES with 192 bit / 24 byte keys
 # @aes-256: AES with 256 bit / 32 byte keys
 # @des: DES with 56 bit / 8 byte keys. Do not use except in VNC. (since 6.1)
 # @3des: 3DES(EDE) with 192 bit / 24 byte keys (since 2.9)
 # @cast5-128: Cast5 with 128 bit / 16 byte keys
 # @serpent-128: Serpent with 128 bit / 16 byte keys
 # @serpent-192: Serpent with 192 bit / 24 byte keys
 # @serpent-256: Serpent with 256 bit / 32 byte keys
 # @twofish-128: Twofish with 128 bit / 16 byte keys
 # @twofish-192: Twofish with 192 bit / 24 byte keys
 # @twofish-256: Twofish with 256 bit / 32 byte keys
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoCipherAlgorithm',
   'prefix': 'QCRYPTO_CIPHER_ALG',
   'data': ['aes-128', 'aes-192', 'aes-256',
            'des', '3des',
            'cast5-128',
            'serpent-128', 'serpent-192', 'serpent-256',
            'twofish-128', 'twofish-192', 'twofish-256']}

 ##
 # @QCryptoCipherMode:
 #
 # The supported modes for content encryption ciphers
 #
 # @ecb: Electronic Code Book
 # @cbc: Cipher Block Chaining
 # @xts: XEX with tweaked code book and ciphertext stealing
 # @ctr: Counter (Since 2.8)
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoCipherMode',
   'prefix': 'QCRYPTO_CIPHER_MODE',
   'data': ['ecb', 'cbc', 'xts', 'ctr']}

 ##
 # @QCryptoIVGenAlgorithm:
 #
 # The supported algorithms for generating initialization
 # vectors for full disk encryption. The 'plain' generator
 # should not be used for disks with sector numbers larger
 # than 2^32, except where compatibility with pre-existing
 # Linux dm-crypt volumes is required.
 #
 # @plain: 64-bit sector number truncated to 32-bits
 # @plain64: 64-bit sector number
 # @essiv: 64-bit sector number encrypted with a hash of the encryption key
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoIVGenAlgorithm',
   'prefix': 'QCRYPTO_IVGEN_ALG',
   'data': ['plain', 'plain64', 'essiv']}

 ##
 # @QCryptoBlockFormat:
 #
 # The supported full disk encryption formats
 #
 # @qcow: QCow/QCow2 built-in AES-CBC encryption. Use only
 #        for liberating data from old images.
 # @luks: LUKS encryption format. Recommended for new images
 #
 # Since: 2.6
 ##
 { 'enum': 'QCryptoBlockFormat',
 #  'prefix': 'QCRYPTO_BLOCK_FORMAT',
   'data': ['qcow', 'luks']}

 ##
 # @QCryptoBlockOptionsBase:
 #
 # The common options that apply to all full disk
 # encryption formats
 #
 # @format: the encryption format
 #
 # Since: 2.6
 ##
 { 'struct': 'QCryptoBlockOptionsBase',
   'data': { 'format': 'QCryptoBlockFormat' }}

 ##
 # @QCryptoBlockOptionsQCow:
 #
 # The options that apply to QCow/QCow2 AES-CBC encryption format
 #
 # @key-secret: the ID of a QCryptoSecret object providing the
 #              decryption key. Mandatory except when probing image for
 #              metadata only.
 #
 # Since: 2.6
 ##
 { 'struct': 'QCryptoBlockOptionsQCow',
   'data': { '*key-secret': 'str' }}

 ##
 # @QCryptoBlockOptionsLUKS:
 #
 # The options that apply to LUKS encryption format
 #
 # @key-secret: the ID of a QCryptoSecret object providing the
 #              decryption key. Mandatory except when probing image for
 #              metadata only.
 #
 # Since: 2.6
 ##
 { 'struct': 'QCryptoBlockOptionsLUKS',
   'data': { '*key-secret': 'str' }}

 ##
 # @QCryptoBlockCreateOptionsLUKS:
 #
 # The options that apply to LUKS encryption format initialization
 #
 # @cipher-alg: the cipher algorithm for data encryption
 #              Currently defaults to 'aes-256'.
 # @cipher-mode: the cipher mode for data encryption
 #               Currently defaults to 'xts'
 # @ivgen-alg: the initialization vector generator
 #             Currently defaults to 'plain64'
 # @ivgen-hash-alg: the initialization vector generator hash
 #                  Currently defaults to 'sha256'
 # @hash-alg: the master key hash algorithm
 #            Currently defaults to 'sha256'
 # @iter-time: number of milliseconds to spend in
 #             PBKDF passphrase processing. Currently defaults
 #             to 2000. (since 2.8)
 #
 # Since: 2.6
 ##
 { 'struct': 'QCryptoBlockCreateOptionsLUKS',
   'base': 'QCryptoBlockOptionsLUKS',
   'data': { '*cipher-alg': 'QCryptoCipherAlgorithm',
             '*cipher-mode': 'QCryptoCipherMode',
             '*ivgen-alg': 'QCryptoIVGenAlgorithm',
             '*ivgen-hash-alg': 'QCryptoHashAlgorithm',
             '*hash-alg': 'QCryptoHashAlgorithm',
             '*iter-time': 'int'}}

 ##
 # @QCryptoBlockOpenOptions:
 #
 # The options that are available for all encryption formats
 # when opening an existing volume
 #
 # Since: 2.6
 ##
 { 'union': 'QCryptoBlockOpenOptions',
   'base': 'QCryptoBlockOptionsBase',
   'discriminator': 'format',
   'data': { 'qcow': 'QCryptoBlockOptionsQCow',
             'luks': 'QCryptoBlockOptionsLUKS' } }

 ##
 # @QCryptoBlockCreateOptions:
 #
 # The options that are available for all encryption formats
 # when initializing a new volume
 #
 # Since: 2.6
 ##
 { 'union': 'QCryptoBlockCreateOptions',
   'base': 'QCryptoBlockOptionsBase',
   'discriminator': 'format',
   'data': { 'qcow': 'QCryptoBlockOptionsQCow',
             'luks': 'QCryptoBlockCreateOptionsLUKS' } }

 ##
 # @QCryptoBlockInfoBase:
 #
 # The common information that applies to all full disk
 # encryption formats
 #
 # @format: the encryption format
 #
 # Since: 2.7
 ##
 { 'struct': 'QCryptoBlockInfoBase',
   'data': { 'format': 'QCryptoBlockFormat' }}

 ##
 # @QCryptoBlockInfoLUKSSlot:
 #
 # Information about the LUKS block encryption key
 # slot options
 #
 # @active: whether the key slot is currently in use
 # @key-offset: offset to the key material in bytes
 # @iters: number of PBKDF2 iterations for key material
 # @stripes: number of stripes for splitting key material
 #
 # Since: 2.7
 ##
 { 'struct': 'QCryptoBlockInfoLUKSSlot',
   'data': {'active': 'bool',
            '*iters': 'int',
            '*stripes': 'int',
            'key-offset': 'int' } }

 ##
 # @QCryptoBlockInfoLUKS:
 #
 # Information about the LUKS block encryption options
 #
 # @cipher-alg: the cipher algorithm for data encryption
 # @cipher-mode: the cipher mode for data encryption
 # @ivgen-alg: the initialization vector generator
 # @ivgen-hash-alg: the initialization vector generator hash
 # @hash-alg: the master key hash algorithm
 # @payload-offset: offset to the payload data in bytes
 # @master-key-iters: number of PBKDF2 iterations for key material
 # @uuid: unique identifier for the volume
 # @slots: information about each key slot
 #
 # Since: 2.7
 ##
 { 'struct': 'QCryptoBlockInfoLUKS',
   'data': {'cipher-alg': 'QCryptoCipherAlgorithm',
            'cipher-mode': 'QCryptoCipherMode',
            'ivgen-alg': 'QCryptoIVGenAlgorithm',
            '*ivgen-hash-alg': 'QCryptoHashAlgorithm',
            'hash-alg': 'QCryptoHashAlgorithm',
            'payload-offset': 'int',
            'master-key-iters': 'int',
            'uuid': 'str',
            'slots': [ 'QCryptoBlockInfoLUKSSlot' ] }}

 ##
 # @QCryptoBlockInfo:
 #
 # Information about the block encryption options
 #
 # Since: 2.7
 ##
 { 'union': 'QCryptoBlockInfo',
   'base': 'QCryptoBlockInfoBase',
   'discriminator': 'format',
   'data': { 'luks': 'QCryptoBlockInfoLUKS' } }

 ##
 # @QCryptoBlockLUKSKeyslotState:
 #
 # Defines state of keyslots that are affected by the update
 #
 # @active: The slots contain the given password and marked as active
 # @inactive: The slots are erased (contain garbage) and marked as inactive
 #
 # Since: 5.1
 ##
 { 'enum': 'QCryptoBlockLUKSKeyslotState',
   'data': [ 'active', 'inactive' ] }

 ##
 # @QCryptoBlockAmendOptionsLUKS:
 #
 # This struct defines the update parameters that activate/de-activate set
 # of keyslots
 #
 # @state: the desired state of the keyslots
 #
 # @new-secret: The ID of a QCryptoSecret object providing the password to be
 #              written into added active keyslots
 #
 # @old-secret: Optional (for deactivation only)
 #              If given will deactivate all keyslots that
 #              match password located in QCryptoSecret with this ID
 #
 # @iter-time: Optional (for activation only)
 #             Number of milliseconds to spend in
 #             PBKDF passphrase processing for the newly activated keyslot.
 #             Currently defaults to 2000.
 #
 # @keyslot: Optional. ID of the keyslot to activate/deactivate.
 #           For keyslot activation, keyslot should not be active already
 #           (this is unsafe to update an active keyslot),
 #           but possible if 'force' parameter is given.
 #           If keyslot is not given, first free keyslot will be written.
 #
 #           For keyslot deactivation, this parameter specifies the exact
 #           keyslot to deactivate
 #
 # @secret: Optional. The ID of a QCryptoSecret object providing the
 #          password to use to retrieve current master key.
 #          Defaults to the same secret that was used to open the image
 #
 # Since: 5.1
 ##
 { 'struct': 'QCryptoBlockAmendOptionsLUKS',
   'data': { 'state': 'QCryptoBlockLUKSKeyslotState',
             '*new-secret': 'str',
             '*old-secret': 'str',
             '*keyslot': 'int',
             '*iter-time': 'int',
             '*secret': 'str' } }

 ##
 # @QCryptoBlockAmendOptions:
 #
 # The options that are available for all encryption formats
 # when amending encryption settings
 #
 # Since: 5.1
 ##
 { 'union': 'QCryptoBlockAmendOptions',
   'base': 'QCryptoBlockOptionsBase',
   'discriminator': 'format',
   'data': {
           'luks': 'QCryptoBlockAmendOptionsLUKS' } }

 ##
 # @SecretCommonProperties:
 #
 # Properties for objects of classes derived from secret-common.
 #
 # @loaded: if true, the secret is loaded immediately when applying this option
 #          and will probably fail when processing the next option. Don't use;
 #          only provided for compatibility. (default: false)
 #
 # @format: the data format that the secret is provided in (default: raw)
 #
 # @keyid: the name of another secret that should be used to decrypt the
 #         provided data. If not present, the data is assumed to be unencrypted.
 #
 # @iv: the random initialization vector used for encryption of this particular
 #      secret. Should be a base64 encrypted string of the 16-byte IV. Mandatory
 #      if @keyid is given. Ignored if @keyid is absent.
 #
 # Features:
 # @deprecated: Member @loaded is deprecated.  Setting true doesn't make sense,
 #              and false is already the default.
 #
 # Since: 2.6
 ##
 { 'struct': 'SecretCommonProperties',
   'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
             '*format': 'QCryptoSecretFormat',
             '*keyid': 'str',
             '*iv': 'str' } }

 ##
 # @SecretProperties:
 #
 # Properties for secret objects.
 #
 # Either @data or @file must be provided, but not both.
 #
 # @data: the associated with the secret from
 #
 # @file: the filename to load the data associated with the secret from
 #
 # Since: 2.6
 ##
 { 'struct': 'SecretProperties',
   'base': 'SecretCommonProperties',
   'data': { '*data': 'str',
             '*file': 'str' } }

 ##
 # @SecretKeyringProperties:
 #
 # Properties for secret_keyring objects.
 #
 # @serial: serial number that identifies a key to get from the kernel
 #
 # Since: 5.1
 ##
 { 'struct': 'SecretKeyringProperties',
   'base': 'SecretCommonProperties',
   'data': { 'serial': 'int32' } }

 ##
 # @TlsCredsProperties:
 #
 # Properties for objects of classes derived from tls-creds.
 #
 # @verify-peer: if true the peer credentials will be verified once the
 #               handshake is completed.  This is a no-op for anonymous
 #               credentials. (default: true)
 #
 # @dir: the path of the directory that contains the credential files
 #
 # @endpoint: whether the QEMU network backend that uses the credentials will be
 #            acting as a client or as a server (default: client)
 #
 # @priority: a gnutls priority string as described at
 #            https://gnutls.org/manual/html_node/Priority-Strings.html
 #
 # Since: 2.5
 ##
 { 'struct': 'TlsCredsProperties',
   'data': { '*verify-peer': 'bool',
             '*dir': 'str',
             '*endpoint': 'QCryptoTLSCredsEndpoint',
             '*priority': 'str' } }

 ##
 # @TlsCredsAnonProperties:
 #
 # Properties for tls-creds-anon objects.
 #
 # @loaded: if true, the credentials are loaded immediately when applying this
 #          option and will ignore options that are processed later. Don't use;
 #          only provided for compatibility. (default: false)
 #
 # Features:
 # @deprecated: Member @loaded is deprecated.  Setting true doesn't make sense,
 #              and false is already the default.
 #
 # Since: 2.5
 ##
 { 'struct': 'TlsCredsAnonProperties',
   'base': 'TlsCredsProperties',
   'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] } } }

 ##
 # @TlsCredsPskProperties:
 #
 # Properties for tls-creds-psk objects.
 #
 # @loaded: if true, the credentials are loaded immediately when applying this
 #          option and will ignore options that are processed later. Don't use;
 #          only provided for compatibility. (default: false)
 #
 # @username: the username which will be sent to the server.  For clients only.
 #            If absent, "qemu" is sent and the property will read back as an
 #            empty string.
 #
 # Features:
 # @deprecated: Member @loaded is deprecated.  Setting true doesn't make sense,
 #              and false is already the default.
 #
 # Since: 3.0
 ##
 { 'struct': 'TlsCredsPskProperties',
   'base': 'TlsCredsProperties',
   'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
             '*username': 'str' } }

 ##
 # @TlsCredsX509Properties:
 #
 # Properties for tls-creds-x509 objects.
 #
 # @loaded: if true, the credentials are loaded immediately when applying this
 #          option and will ignore options that are processed later. Don't use;
 #          only provided for compatibility. (default: false)
 #
 # @sanity-check: if true, perform some sanity checks before using the
 #                credentials (default: true)
 #
 # @passwordid: For the server-key.pem and client-key.pem files which contain
 #              sensitive private keys, it is possible to use an encrypted
 #              version by providing the @passwordid parameter.  This provides
 #              the ID of a previously created secret object containing the
 #              password for decryption.
 #
 # Features:
 # @deprecated: Member @loaded is deprecated.  Setting true doesn't make sense,
 #              and false is already the default.
 #
 # Since: 2.5
 ##
 { 'struct': 'TlsCredsX509Properties',
   'base': 'TlsCredsProperties',
   'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
             '*sanity-check': 'bool',
             '*passwordid': 'str' } }
 ##
 # @QCryptoAkCipherAlgorithm:
 #
 # The supported algorithms for asymmetric encryption ciphers
 #
 # @rsa: RSA algorithm
 #
 # Since: 7.1
 ##
 { 'enum': 'QCryptoAkCipherAlgorithm',
   'prefix': 'QCRYPTO_AKCIPHER_ALG',
   'data': ['rsa']}

 ##
 # @QCryptoAkCipherKeyType:
 #
 # The type of asymmetric keys.
 #
 # Since: 7.1
 ##
 { 'enum': 'QCryptoAkCipherKeyType',
   'prefix': 'QCRYPTO_AKCIPHER_KEY_TYPE',
   'data': ['public', 'private']}

 ##
 # @QCryptoRSAPaddingAlgorithm:
 #
 # The padding algorithm for RSA.
 #
 # @raw: no padding used
 # @pkcs1: pkcs1#v1.5
 #
 # Since: 7.1
 ##
 { 'enum': 'QCryptoRSAPaddingAlgorithm',
   'prefix': 'QCRYPTO_RSA_PADDING_ALG',
   'data': ['raw', 'pkcs1']}

 ##
 # @QCryptoAkCipherOptionsRSA:
 #
 # Specific parameters for RSA algorithm.
 #
 # @hash-alg: QCryptoHashAlgorithm
 # @padding-alg: QCryptoRSAPaddingAlgorithm
 #
 # Since: 7.1
 ##
 { 'struct': 'QCryptoAkCipherOptionsRSA',
   'data': { 'hash-alg':'QCryptoHashAlgorithm',
             'padding-alg': 'QCryptoRSAPaddingAlgorithm'}}

 ##
 # @QCryptoAkCipherOptions:
 #
 # The options that are available for all asymmetric key algorithms
 # when creating a new QCryptoAkCipher.
 #
 # Since: 7.1
 ##
 { 'union': 'QCryptoAkCipherOptions',
   'base': { 'alg': 'QCryptoAkCipherAlgorithm' },
   'discriminator': 'alg',
   'data': { 'rsa': 'QCryptoAkCipherOptionsRSA' }}
	# -- Mode: Python --
	# vim: filetype=python
	#

	##
	# = Cryptography
	##

	##
	# @QCryptoTLSCredsEndpoint:
	#
	# The type of network endpoint that will be using the credentials.
	# Most types of credential require different setup / structures
	# depending on whether they will be used in a server versus a
	# client.
	#
	# @client: the network endpoint is acting as the client
	#
	# @server: the network endpoint is acting as the server
	#
	# Since: 2.5
	##
	{ 'enum': 'QCryptoTLSCredsEndpoint',
	'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
	'data': ['client', 'server']}

	##
	# @QCryptoSecretFormat:
	#
	# The data format that the secret is provided in
	#
	# @raw: raw bytes. When encoded in JSON only valid UTF-8 sequences can be used
	# @base64: arbitrary base64 encoded binary data
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoSecretFormat',
	'prefix': 'QCRYPTO_SECRET_FORMAT',
	'data': ['raw', 'base64']}

	##
	# @QCryptoHashAlgorithm:
	#
	# The supported algorithms for computing content digests
	#
	# @md5: MD5. Should not be used in any new code, legacy compat only
	# @sha1: SHA-1. Should not be used in any new code, legacy compat only
	# @sha224: SHA-224. (since 2.7)
	# @sha256: SHA-256. Current recommended strong hash.
	# @sha384: SHA-384. (since 2.7)
	# @sha512: SHA-512. (since 2.7)
	# @ripemd160: RIPEMD-160. (since 2.7)
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoHashAlgorithm',
	'prefix': 'QCRYPTO_HASH_ALG',
	'data': ['md5', 'sha1', 'sha224', 'sha256', 'sha384', 'sha512', 'ripemd160']}

	##
	# @QCryptoCipherAlgorithm:
	#
	# The supported algorithms for content encryption ciphers
	#
	# @aes-128: AES with 128 bit / 16 byte keys
	# @aes-192: AES with 192 bit / 24 byte keys
	# @aes-256: AES with 256 bit / 32 byte keys
	# @des: DES with 56 bit / 8 byte keys. Do not use except in VNC. (since 6.1)
	# @3des: 3DES(EDE) with 192 bit / 24 byte keys (since 2.9)
	# @cast5-128: Cast5 with 128 bit / 16 byte keys
	# @serpent-128: Serpent with 128 bit / 16 byte keys
	# @serpent-192: Serpent with 192 bit / 24 byte keys
	# @serpent-256: Serpent with 256 bit / 32 byte keys
	# @twofish-128: Twofish with 128 bit / 16 byte keys
	# @twofish-192: Twofish with 192 bit / 24 byte keys
	# @twofish-256: Twofish with 256 bit / 32 byte keys
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoCipherAlgorithm',
	'prefix': 'QCRYPTO_CIPHER_ALG',
	'data': ['aes-128', 'aes-192', 'aes-256',
	'des', '3des',
	'cast5-128',
	'serpent-128', 'serpent-192', 'serpent-256',
	'twofish-128', 'twofish-192', 'twofish-256']}

	##
	# @QCryptoCipherMode:
	#
	# The supported modes for content encryption ciphers
	#
	# @ecb: Electronic Code Book
	# @cbc: Cipher Block Chaining
	# @xts: XEX with tweaked code book and ciphertext stealing
	# @ctr: Counter (Since 2.8)
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoCipherMode',
	'prefix': 'QCRYPTO_CIPHER_MODE',
	'data': ['ecb', 'cbc', 'xts', 'ctr']}

	##
	# @QCryptoIVGenAlgorithm:
	#
	# The supported algorithms for generating initialization
	# vectors for full disk encryption. The 'plain' generator
	# should not be used for disks with sector numbers larger
	# than 2^32, except where compatibility with pre-existing
	# Linux dm-crypt volumes is required.
	#
	# @plain: 64-bit sector number truncated to 32-bits
	# @plain64: 64-bit sector number
	# @essiv: 64-bit sector number encrypted with a hash of the encryption key
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoIVGenAlgorithm',
	'prefix': 'QCRYPTO_IVGEN_ALG',
	'data': ['plain', 'plain64', 'essiv']}

	##
	# @QCryptoBlockFormat:
	#
	# The supported full disk encryption formats
	#
	# @qcow: QCow/QCow2 built-in AES-CBC encryption. Use only
	# for liberating data from old images.
	# @luks: LUKS encryption format. Recommended for new images
	#
	# Since: 2.6
	##
	{ 'enum': 'QCryptoBlockFormat',
	# 'prefix': 'QCRYPTO_BLOCK_FORMAT',
	'data': ['qcow', 'luks']}

	##
	# @QCryptoBlockOptionsBase:
	#
	# The common options that apply to all full disk
	# encryption formats
	#
	# @format: the encryption format
	#
	# Since: 2.6
	##
	{ 'struct': 'QCryptoBlockOptionsBase',
	'data': { 'format': 'QCryptoBlockFormat' }}

	##
	# @QCryptoBlockOptionsQCow:
	#
	# The options that apply to QCow/QCow2 AES-CBC encryption format
	#
	# @key-secret: the ID of a QCryptoSecret object providing the
	# decryption key. Mandatory except when probing image for
	# metadata only.
	#
	# Since: 2.6
	##
	{ 'struct': 'QCryptoBlockOptionsQCow',
	'data': { '*key-secret': 'str' }}

	##
	# @QCryptoBlockOptionsLUKS:
	#
	# The options that apply to LUKS encryption format
	#
	# @key-secret: the ID of a QCryptoSecret object providing the
	# decryption key. Mandatory except when probing image for
	# metadata only.
	#
	# Since: 2.6
	##
	{ 'struct': 'QCryptoBlockOptionsLUKS',
	'data': { '*key-secret': 'str' }}

	##
	# @QCryptoBlockCreateOptionsLUKS:
	#
	# The options that apply to LUKS encryption format initialization
	#
	# @cipher-alg: the cipher algorithm for data encryption
	# Currently defaults to 'aes-256'.
	# @cipher-mode: the cipher mode for data encryption
	# Currently defaults to 'xts'
	# @ivgen-alg: the initialization vector generator
	# Currently defaults to 'plain64'
	# @ivgen-hash-alg: the initialization vector generator hash
	# Currently defaults to 'sha256'
	# @hash-alg: the master key hash algorithm
	# Currently defaults to 'sha256'
	# @iter-time: number of milliseconds to spend in
	# PBKDF passphrase processing. Currently defaults
	# to 2000. (since 2.8)
	#
	# Since: 2.6
	##
	{ 'struct': 'QCryptoBlockCreateOptionsLUKS',
	'base': 'QCryptoBlockOptionsLUKS',
	'data': { '*cipher-alg': 'QCryptoCipherAlgorithm',
	'*cipher-mode': 'QCryptoCipherMode',
	'*ivgen-alg': 'QCryptoIVGenAlgorithm',
	'*ivgen-hash-alg': 'QCryptoHashAlgorithm',
	'*hash-alg': 'QCryptoHashAlgorithm',
	'*iter-time': 'int'}}

	##
	# @QCryptoBlockOpenOptions:
	#
	# The options that are available for all encryption formats
	# when opening an existing volume
	#
	# Since: 2.6
	##
	{ 'union': 'QCryptoBlockOpenOptions',
	'base': 'QCryptoBlockOptionsBase',
	'discriminator': 'format',
	'data': { 'qcow': 'QCryptoBlockOptionsQCow',
	'luks': 'QCryptoBlockOptionsLUKS' } }

	##
	# @QCryptoBlockCreateOptions:
	#
	# The options that are available for all encryption formats
	# when initializing a new volume
	#
	# Since: 2.6
	##
	{ 'union': 'QCryptoBlockCreateOptions',
	'base': 'QCryptoBlockOptionsBase',
	'discriminator': 'format',
	'data': { 'qcow': 'QCryptoBlockOptionsQCow',
	'luks': 'QCryptoBlockCreateOptionsLUKS' } }

	##
	# @QCryptoBlockInfoBase:
	#
	# The common information that applies to all full disk
	# encryption formats
	#
	# @format: the encryption format
	#
	# Since: 2.7
	##
	{ 'struct': 'QCryptoBlockInfoBase',
	'data': { 'format': 'QCryptoBlockFormat' }}

	##
	# @QCryptoBlockInfoLUKSSlot:
	#
	# Information about the LUKS block encryption key
	# slot options
	#
	# @active: whether the key slot is currently in use
	# @key-offset: offset to the key material in bytes
	# @iters: number of PBKDF2 iterations for key material
	# @stripes: number of stripes for splitting key material
	#
	# Since: 2.7
	##
	{ 'struct': 'QCryptoBlockInfoLUKSSlot',
	'data': {'active': 'bool',
	'*iters': 'int',
	'*stripes': 'int',
	'key-offset': 'int' } }

	##
	# @QCryptoBlockInfoLUKS:
	#
	# Information about the LUKS block encryption options
	#
	# @cipher-alg: the cipher algorithm for data encryption
	# @cipher-mode: the cipher mode for data encryption
	# @ivgen-alg: the initialization vector generator
	# @ivgen-hash-alg: the initialization vector generator hash
	# @hash-alg: the master key hash algorithm
	# @payload-offset: offset to the payload data in bytes
	# @master-key-iters: number of PBKDF2 iterations for key material
	# @uuid: unique identifier for the volume
	# @slots: information about each key slot
	#
	# Since: 2.7
	##
	{ 'struct': 'QCryptoBlockInfoLUKS',
	'data': {'cipher-alg': 'QCryptoCipherAlgorithm',
	'cipher-mode': 'QCryptoCipherMode',
	'ivgen-alg': 'QCryptoIVGenAlgorithm',
	'*ivgen-hash-alg': 'QCryptoHashAlgorithm',
	'hash-alg': 'QCryptoHashAlgorithm',
	'payload-offset': 'int',
	'master-key-iters': 'int',
	'uuid': 'str',
	'slots': [ 'QCryptoBlockInfoLUKSSlot' ] }}

	##
	# @QCryptoBlockInfo:
	#
	# Information about the block encryption options
	#
	# Since: 2.7
	##
	{ 'union': 'QCryptoBlockInfo',
	'base': 'QCryptoBlockInfoBase',
	'discriminator': 'format',
	'data': { 'luks': 'QCryptoBlockInfoLUKS' } }

	##
	# @QCryptoBlockLUKSKeyslotState:
	#
	# Defines state of keyslots that are affected by the update
	#
	# @active: The slots contain the given password and marked as active
	# @inactive: The slots are erased (contain garbage) and marked as inactive
	#
	# Since: 5.1
	##
	{ 'enum': 'QCryptoBlockLUKSKeyslotState',
	'data': [ 'active', 'inactive' ] }

	##
	# @QCryptoBlockAmendOptionsLUKS:
	#
	# This struct defines the update parameters that activate/de-activate set
	# of keyslots
	#
	# @state: the desired state of the keyslots
	#
	# @new-secret: The ID of a QCryptoSecret object providing the password to be
	# written into added active keyslots
	#
	# @old-secret: Optional (for deactivation only)
	# If given will deactivate all keyslots that
	# match password located in QCryptoSecret with this ID
	#
	# @iter-time: Optional (for activation only)
	# Number of milliseconds to spend in
	# PBKDF passphrase processing for the newly activated keyslot.
	# Currently defaults to 2000.
	#
	# @keyslot: Optional. ID of the keyslot to activate/deactivate.
	# For keyslot activation, keyslot should not be active already
	# (this is unsafe to update an active keyslot),
	# but possible if 'force' parameter is given.
	# If keyslot is not given, first free keyslot will be written.
	#
	# For keyslot deactivation, this parameter specifies the exact
	# keyslot to deactivate
	#
	# @secret: Optional. The ID of a QCryptoSecret object providing the
	# password to use to retrieve current master key.
	# Defaults to the same secret that was used to open the image
	#
	# Since: 5.1
	##
	{ 'struct': 'QCryptoBlockAmendOptionsLUKS',
	'data': { 'state': 'QCryptoBlockLUKSKeyslotState',
	'*new-secret': 'str',
	'*old-secret': 'str',
	'*keyslot': 'int',
	'*iter-time': 'int',
	'*secret': 'str' } }

	##
	# @QCryptoBlockAmendOptions:
	#
	# The options that are available for all encryption formats
	# when amending encryption settings
	#
	# Since: 5.1
	##
	{ 'union': 'QCryptoBlockAmendOptions',
	'base': 'QCryptoBlockOptionsBase',
	'discriminator': 'format',
	'data': {
	'luks': 'QCryptoBlockAmendOptionsLUKS' } }

	##
	# @SecretCommonProperties:
	#
	# Properties for objects of classes derived from secret-common.
	#
	# @loaded: if true, the secret is loaded immediately when applying this option
	# and will probably fail when processing the next option. Don't use;
	# only provided for compatibility. (default: false)
	#
	# @format: the data format that the secret is provided in (default: raw)
	#
	# @keyid: the name of another secret that should be used to decrypt the
	# provided data. If not present, the data is assumed to be unencrypted.
	#
	# @iv: the random initialization vector used for encryption of this particular
	# secret. Should be a base64 encrypted string of the 16-byte IV. Mandatory
	# if @keyid is given. Ignored if @keyid is absent.
	#
	# Features:
	# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
	# and false is already the default.
	#
	# Since: 2.6
	##
	{ 'struct': 'SecretCommonProperties',
	'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
	'*format': 'QCryptoSecretFormat',
	'*keyid': 'str',
	'*iv': 'str' } }

	##
	# @SecretProperties:
	#
	# Properties for secret objects.
	#
	# Either @data or @file must be provided, but not both.
	#
	# @data: the associated with the secret from
	#
	# @file: the filename to load the data associated with the secret from
	#
	# Since: 2.6
	##
	{ 'struct': 'SecretProperties',
	'base': 'SecretCommonProperties',
	'data': { '*data': 'str',
	'*file': 'str' } }

	##
	# @SecretKeyringProperties:
	#
	# Properties for secret_keyring objects.
	#
	# @serial: serial number that identifies a key to get from the kernel
	#
	# Since: 5.1
	##
	{ 'struct': 'SecretKeyringProperties',
	'base': 'SecretCommonProperties',
	'data': { 'serial': 'int32' } }

	##
	# @TlsCredsProperties:
	#
	# Properties for objects of classes derived from tls-creds.
	#
	# @verify-peer: if true the peer credentials will be verified once the
	# handshake is completed. This is a no-op for anonymous
	# credentials. (default: true)
	#
	# @dir: the path of the directory that contains the credential files
	#
	# @endpoint: whether the QEMU network backend that uses the credentials will be
	# acting as a client or as a server (default: client)
	#
	# @priority: a gnutls priority string as described at
	# https://gnutls.org/manual/html_node/Priority-Strings.html
	#
	# Since: 2.5
	##
	{ 'struct': 'TlsCredsProperties',
	'data': { '*verify-peer': 'bool',
	'*dir': 'str',
	'*endpoint': 'QCryptoTLSCredsEndpoint',
	'*priority': 'str' } }

	##
	# @TlsCredsAnonProperties:
	#
	# Properties for tls-creds-anon objects.
	#
	# @loaded: if true, the credentials are loaded immediately when applying this
	# option and will ignore options that are processed later. Don't use;
	# only provided for compatibility. (default: false)
	#
	# Features:
	# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
	# and false is already the default.
	#
	# Since: 2.5
	##
	{ 'struct': 'TlsCredsAnonProperties',
	'base': 'TlsCredsProperties',
	'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] } } }

	##
	# @TlsCredsPskProperties:
	#
	# Properties for tls-creds-psk objects.
	#
	# @loaded: if true, the credentials are loaded immediately when applying this
	# option and will ignore options that are processed later. Don't use;
	# only provided for compatibility. (default: false)
	#
	# @username: the username which will be sent to the server. For clients only.
	# If absent, "qemu" is sent and the property will read back as an
	# empty string.
	#
	# Features:
	# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
	# and false is already the default.
	#
	# Since: 3.0
	##
	{ 'struct': 'TlsCredsPskProperties',
	'base': 'TlsCredsProperties',
	'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
	'*username': 'str' } }

	##
	# @TlsCredsX509Properties:
	#
	# Properties for tls-creds-x509 objects.
	#
	# @loaded: if true, the credentials are loaded immediately when applying this
	# option and will ignore options that are processed later. Don't use;
	# only provided for compatibility. (default: false)
	#
	# @sanity-check: if true, perform some sanity checks before using the
	# credentials (default: true)
	#
	# @passwordid: For the server-key.pem and client-key.pem files which contain
	# sensitive private keys, it is possible to use an encrypted
	# version by providing the @passwordid parameter. This provides
	# the ID of a previously created secret object containing the
	# password for decryption.
	#
	# Features:
	# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
	# and false is already the default.
	#
	# Since: 2.5
	##
	{ 'struct': 'TlsCredsX509Properties',
	'base': 'TlsCredsProperties',
	'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
	'*sanity-check': 'bool',
	'*passwordid': 'str' } }
	##
	# @QCryptoAkCipherAlgorithm:
	#
	# The supported algorithms for asymmetric encryption ciphers
	#
	# @rsa: RSA algorithm
	#
	# Since: 7.1
	##
	{ 'enum': 'QCryptoAkCipherAlgorithm',
	'prefix': 'QCRYPTO_AKCIPHER_ALG',
	'data': ['rsa']}

	##
	# @QCryptoAkCipherKeyType:
	#
	# The type of asymmetric keys.
	#
	# Since: 7.1
	##
	{ 'enum': 'QCryptoAkCipherKeyType',
	'prefix': 'QCRYPTO_AKCIPHER_KEY_TYPE',
	'data': ['public', 'private']}

	##
	# @QCryptoRSAPaddingAlgorithm:
	#
	# The padding algorithm for RSA.
	#
	# @raw: no padding used
	# @pkcs1: pkcs1#v1.5
	#
	# Since: 7.1
	##
	{ 'enum': 'QCryptoRSAPaddingAlgorithm',
	'prefix': 'QCRYPTO_RSA_PADDING_ALG',
	'data': ['raw', 'pkcs1']}

	##
	# @QCryptoAkCipherOptionsRSA:
	#
	# Specific parameters for RSA algorithm.
	#
	# @hash-alg: QCryptoHashAlgorithm
	# @padding-alg: QCryptoRSAPaddingAlgorithm
	#
	# Since: 7.1
	##
	{ 'struct': 'QCryptoAkCipherOptionsRSA',
	'data': { 'hash-alg':'QCryptoHashAlgorithm',
	'padding-alg': 'QCryptoRSAPaddingAlgorithm'}}

	##
	# @QCryptoAkCipherOptions:
	#
	# The options that are available for all asymmetric key algorithms
	# when creating a new QCryptoAkCipher.
	#
	# Since: 7.1
	##
	{ 'union': 'QCryptoAkCipherOptions',
	'base': { 'alg': 'QCryptoAkCipherAlgorithm' },
	'discriminator': 'alg',
	'data': { 'rsa': 'QCryptoAkCipherOptionsRSA' }}