diff --git a/MAINTAINERS b/MAINTAINERS
index 5f93e8c..8cbc1fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2038,6 +2038,11 @@
 S: Supported
 F: scripts/coverity-model.c
 
+Coverity Scan integration
+M: Peter Maydell <peter.maydell@linaro.org>
+S: Maintained
+F: scripts/coverity-scan/
+
 Device Tree
 M: Alistair Francis <alistair.francis@wdc.com>
 R: David Gibson <david@gibson.dropbear.id.au>
diff --git a/Makefile b/Makefile
index 84ef881..8a9113e 100644
--- a/Makefile
+++ b/Makefile
@@ -1076,7 +1076,7 @@
 # Note the use of different doctree for each (manual, builder) tuple;
 # this works around Sphinx not handling parallel invocation on
 # a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946
-build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) -W -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
+build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
 # We assume all RST files in the manual's directory are used in it
 manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \
               $(SRC_PATH)/docs/defs.rst.inc \
diff --git a/configure b/configure
index 233c671..9b1f5b3 100755
--- a/configure
+++ b/configure
@@ -4928,6 +4928,12 @@
     kcov=yes
 fi
 
+# If we're making warnings fatal, apply this to Sphinx runs as well
+sphinx_werror=""
+if test "$werror" = "yes"; then
+    sphinx_werror="-W"
+fi
+
 # Check we have a new enough version of sphinx-build
 has_sphinx_build() {
     # This is a bit awkward but works: create a trivial document and
@@ -4936,7 +4942,7 @@
     # sphinx-build doesn't exist at all or if it is too old.
     mkdir -p "$TMPDIR1/sphinx"
     touch "$TMPDIR1/sphinx/index.rst"
-    "$sphinx_build" -c "$source_path/docs" -b html "$TMPDIR1/sphinx" "$TMPDIR1/sphinx/out" >/dev/null 2>&1
+    "$sphinx_build" $sphinx_werror -c "$source_path/docs" -b html "$TMPDIR1/sphinx" "$TMPDIR1/sphinx/out" >/dev/null 2>&1
 }
 
 # Check if tools are available to build documentation.
@@ -7631,6 +7637,7 @@
 echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
 echo "PYTHON=$python" >> $config_host_mak
 echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
+echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
 echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
 echo "CC=$cc" >> $config_host_mak
 if $iasl -h > /dev/null 2>&1; then
diff --git a/docs/conf.py b/docs/conf.py
index 7768611..d6e173e 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -59,8 +59,10 @@
 
 # If your documentation needs a minimal Sphinx version, state it here.
 #
-# 1.3 is where the 'alabaster' theme was shipped with Sphinx.
-needs_sphinx = '1.3'
+# Sphinx 1.5 and earlier can't build our docs because they are too
+# picky about the syntax of the argument to the option:: directive
+# (see Sphinx bugs #646, #3366).
+needs_sphinx = '1.6'
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
diff --git a/docs/sphinx/kerneldoc.py b/docs/sphinx/kerneldoc.py
index 1159405..3e87940 100644
--- a/docs/sphinx/kerneldoc.py
+++ b/docs/sphinx/kerneldoc.py
@@ -99,6 +99,7 @@
                 env.note_dependency(os.path.abspath(f))
                 cmd += ['-export-file', f]
 
+        cmd += ['-sphinx-version', sphinx.__version__]
         cmd += [filename]
 
         try:
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index c633fe2..3142fac 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -336,6 +336,14 @@
 the processor has been deprecated. The ``max-cpu-compat`` property of
 the ``pseries`` machine type should be used instead.
 
+KVM guest support on 32-bit Arm hosts (since 5.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''
+
+The Linux kernel has dropped support for allowing 32-bit Arm systems
+to host KVM guests as of the 5.7 kernel. Accordingly, QEMU is deprecating
+its support for this configuration and will remove it in a future version.
+Running 32-bit guests on a 64-bit Arm host remains supported.
+
 System emulator devices
 -----------------------
 
diff --git a/docs/system/gdb.rst b/docs/system/gdb.rst
index 639f814..a40145f 100644
--- a/docs/system/gdb.rst
+++ b/docs/system/gdb.rst
@@ -3,17 +3,25 @@
 GDB usage
 ---------
 
-QEMU has a primitive support to work with gdb, so that you can do
-'Ctrl-C' while the virtual machine is running and inspect its state.
+QEMU supports working with gdb via gdb's remote-connection facility
+(the "gdbstub"). This allows you to debug guest code in the same
+way that you might with a low-level debug facility like JTAG
+on real hardware. You can stop and start the virtual machine,
+examine state like registers and memory, and set breakpoints and
+watchpoints.
 
-In order to use gdb, launch QEMU with the '-s' option. It will wait for
-a gdb connection:
+In order to use gdb, launch QEMU with the ``-s`` and ``-S`` options.
+The ``-s`` option will make QEMU listen for an incoming connection
+from gdb on TCP port 1234, and ``-S`` will make QEMU not start the
+guest until you tell it to from gdb. (If you want to specify which
+TCP port to use or to use something other than TCP for the gdbstub
+connection, use the ``-gdb dev`` option instead of ``-s``.)
 
 .. parsed-literal::
 
-   |qemu_system| -s -kernel bzImage -hda rootdisk.img -append "root=/dev/hda"
-   Connected to host network interface: tun0
-   Waiting gdb connection on port 1234
+   |qemu_system| -s -S -kernel bzImage -hda rootdisk.img -append "root=/dev/hda"
+
+QEMU will launch but will silently wait for gdb to connect.
 
 Then launch gdb on the 'vmlinux' executable::
 
diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
index 9bd3dcf..20f5c5f 100644
--- a/include/qemu/osdep.h
+++ b/include/qemu/osdep.h
@@ -33,20 +33,6 @@
 #else
 #include "exec/poison.h"
 #endif
-#ifdef __COVERITY__
-/* Coverity does not like the new _Float* types that are used by
- * recent glibc, and croaks on every single file that includes
- * stdlib.h.  These typedefs are enough to please it.
- *
- * Note that these fix parse errors so they cannot be placed in
- * scripts/coverity-model.c.
- */
-typedef float _Float32;
-typedef double _Float32x;
-typedef double _Float64;
-typedef __float80 _Float64x;
-typedef __float128 _Float128;
-#endif
 
 #include "qemu/compiler.h"
 
diff --git a/include/qemu/thread.h b/include/qemu/thread.h
index 047db03..d228481 100644
--- a/include/qemu/thread.h
+++ b/include/qemu/thread.h
@@ -57,17 +57,17 @@
  * hide them.
  */
 #define qemu_mutex_lock(m)                                              \
-            qemu_mutex_lock_impl(m, __FILE__, __LINE__);
+            qemu_mutex_lock_impl(m, __FILE__, __LINE__)
 #define qemu_mutex_trylock(m)                                           \
-            qemu_mutex_trylock_impl(m, __FILE__, __LINE__);
+            qemu_mutex_trylock_impl(m, __FILE__, __LINE__)
 #define qemu_rec_mutex_lock(m)                                          \
-            qemu_rec_mutex_lock_impl(m, __FILE__, __LINE__);
+            qemu_rec_mutex_lock_impl(m, __FILE__, __LINE__)
 #define qemu_rec_mutex_trylock(m)                                       \
-            qemu_rec_mutex_trylock_impl(m, __FILE__, __LINE__);
+            qemu_rec_mutex_trylock_impl(m, __FILE__, __LINE__)
 #define qemu_cond_wait(c, m)                                            \
-            qemu_cond_wait_impl(c, m, __FILE__, __LINE__);
+            qemu_cond_wait_impl(c, m, __FILE__, __LINE__)
 #define qemu_cond_timedwait(c, m, ms)                                   \
-            qemu_cond_wait_impl(c, m, ms, __FILE__, __LINE__);
+            qemu_cond_timedwait_impl(c, m, ms, __FILE__, __LINE__)
 #else
 #define qemu_mutex_lock(m) ({                                           \
             QemuMutexLockFunc _f = atomic_read(&qemu_mutex_lock_func);  \
diff --git a/linux-user/flatload.c b/linux-user/flatload.c
index 0122ab3..66901f3 100644
--- a/linux-user/flatload.c
+++ b/linux-user/flatload.c
@@ -37,7 +37,7 @@
 
 #include "qemu.h"
 #include "flat.h"
-#include <target_flat.h>
+#include "target_flat.h"
 
 //#define DEBUG
 
diff --git a/qemu-options.hx b/qemu-options.hx
index 16debd0..292d4e7 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -3680,14 +3680,26 @@
 ERST
 
 DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \
-    "-gdb dev        wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL)
+    "-gdb dev        accept gdb connection on 'dev'. (QEMU defaults to starting\n"
+    "                the guest without waiting for gdb to connect; use -S too\n"
+    "                if you want it to not start execution.)\n",
+    QEMU_ARCH_ALL)
 SRST
 ``-gdb dev``
-    Wait for gdb connection on device dev (see
-    :ref:`gdb_005fusage`). Typical connections will likely be
-    TCP-based, but also UDP, pseudo TTY, or even stdio are reasonable
-    use case. The latter is allowing to start QEMU from within gdb and
-    establish the connection via a pipe:
+    Accept a gdb connection on device dev (see
+    :ref:`gdb_005fusage`). Note that this option does not pause QEMU
+    execution -- if you want QEMU to not start the guest until you
+    connect with gdb and issue a ``continue`` command, you will need to
+    also pass the ``-S`` option to QEMU.
+
+    The most usual configuration is to listen on a local TCP socket::
+
+        -gdb tcp::3117
+
+    but you can specify other backends; UDP, pseudo TTY, or even stdio
+    are all reasonable use cases. For example, a stdio connection
+    allows you to start QEMU from within gdb and establish the
+    connection via a pipe:
 
     .. parsed-literal::
 
diff --git a/scripts/coverity-scan/coverity-scan.docker b/scripts/coverity-scan/coverity-scan.docker
new file mode 100644
index 0000000..a4f64d1
--- /dev/null
+++ b/scripts/coverity-scan/coverity-scan.docker
@@ -0,0 +1,131 @@
+# syntax=docker/dockerfile:1.0.0-experimental
+#
+# Docker setup for running the "Coverity Scan" tools over the source
+# tree and uploading them to the website, as per
+# https://scan.coverity.com/projects/qemu/builds/new
+# We do this on a fixed config (currently Fedora 30 with a known
+# set of dependencies and a configure command that enables a specific
+# set of options) so that random changes don't result in our accidentally
+# dropping some files from the scan.
+#
+# We don't build on top of the fedora.docker file because we don't
+# want to accidentally change or break the scan config when that
+# is updated.
+
+# The work of actually doing the build is handled by the
+# run-coverity-scan script.
+
+FROM fedora:30
+ENV PACKAGES \
+    alsa-lib-devel \
+    bc \
+    bison \
+    brlapi-devel \
+    bzip2 \
+    bzip2-devel \
+    ccache \
+    clang \
+    curl \
+    cyrus-sasl-devel \
+    dbus-daemon \
+    device-mapper-multipath-devel \
+    findutils \
+    flex \
+    gcc \
+    gcc-c++ \
+    gettext \
+    git \
+    glib2-devel \
+    glusterfs-api-devel \
+    gnutls-devel \
+    gtk3-devel \
+    hostname \
+    libaio-devel \
+    libasan \
+    libattr-devel \
+    libblockdev-mpath-devel \
+    libcap-devel \
+    libcap-ng-devel \
+    libcurl-devel \
+    libepoxy-devel \
+    libfdt-devel \
+    libgbm-devel \
+    libiscsi-devel \
+    libjpeg-devel \
+    libpmem-devel \
+    libnfs-devel \
+    libpng-devel \
+    librbd-devel \
+    libseccomp-devel \
+    libssh-devel \
+    libubsan \
+    libudev-devel \
+    libusbx-devel \
+    libxml2-devel \
+    libzstd-devel \
+    llvm \
+    lzo-devel \
+    make \
+    mingw32-bzip2 \
+    mingw32-curl \
+    mingw32-glib2 \
+    mingw32-gmp \
+    mingw32-gnutls \
+    mingw32-gtk3 \
+    mingw32-libjpeg-turbo \
+    mingw32-libpng \
+    mingw32-libtasn1 \
+    mingw32-nettle \
+    mingw32-nsis \
+    mingw32-pixman \
+    mingw32-pkg-config \
+    mingw32-SDL2 \
+    mingw64-bzip2 \
+    mingw64-curl \
+    mingw64-glib2 \
+    mingw64-gmp \
+    mingw64-gnutls \
+    mingw64-gtk3 \
+    mingw64-libjpeg-turbo \
+    mingw64-libpng \
+    mingw64-libtasn1 \
+    mingw64-nettle \
+    mingw64-pixman \
+    mingw64-pkg-config \
+    mingw64-SDL2 \
+    ncurses-devel \
+    nettle-devel \
+    nss-devel \
+    numactl-devel \
+    perl \
+    perl-Test-Harness \
+    pixman-devel \
+    pulseaudio-libs-devel \
+    python3 \
+    python3-sphinx \
+    PyYAML \
+    rdma-core-devel \
+    SDL2-devel \
+    snappy-devel \
+    sparse \
+    spice-server-devel \
+    systemd-devel \
+    systemtap-sdt-devel \
+    tar \
+    texinfo \
+    usbredir-devel \
+    virglrenderer-devel \
+    vte291-devel \
+    wget \
+    which \
+    xen-devel \
+    xfsprogs-devel \
+    zlib-devel
+ENV QEMU_CONFIGURE_OPTS --python=/usr/bin/python3
+
+RUN dnf install -y $PACKAGES
+RUN rpm -q $PACKAGES | sort > /packages.txt
+ENV PATH $PATH:/usr/libexec/python3-sphinx/
+ENV COVERITY_TOOL_BASE=/coverity-tools
+COPY run-coverity-scan run-coverity-scan
+RUN --mount=type=secret,id=coverity.token,required ./run-coverity-scan --update-tools-only --tokenfile /run/secrets/coverity.token
diff --git a/scripts/coverity-scan/run-coverity-scan b/scripts/coverity-scan/run-coverity-scan
new file mode 100755
index 0000000..2e067ef
--- /dev/null
+++ b/scripts/coverity-scan/run-coverity-scan
@@ -0,0 +1,401 @@
+#!/bin/sh -e
+
+# Upload a created tarball to Coverity Scan, as per
+# https://scan.coverity.com/projects/qemu/builds/new
+
+# This work is licensed under the terms of the GNU GPL version 2,
+# or (at your option) any later version.
+# See the COPYING file in the top-level directory.
+#
+# Copyright (c) 2017-2020 Linaro Limited
+# Written by Peter Maydell
+
+# Note that this script will automatically download and
+# run the (closed-source) coverity build tools, so don't
+# use it if you don't trust them!
+
+# This script assumes that you're running it from a QEMU source
+# tree, and that tree is a fresh clean one, because we do an in-tree
+# build. (This is necessary so that the filenames that the Coverity
+# Scan server sees are relative paths that match up with the component
+# regular expressions it uses; an out-of-tree build won't work for this.)
+# The host machine should have as many of QEMU's dependencies
+# installed as possible, for maximum coverity coverage.
+
+# To do an upload you need to be a maintainer in the Coverity online
+# service, and you will need to know the "Coverity token", which is a
+# secret 8 digit hex string. You can find that from the web UI in the
+# project settings, if you have maintainer access there.
+
+# Command line options:
+#   --dry-run : run the tools, but don't actually do the upload
+#   --docker : create and work inside a docker container
+#   --update-tools-only : update the cached copy of the tools, but don't run them
+#   --tokenfile : file to read Coverity token from
+#   --version ver : specify version being analyzed (default: ask git)
+#   --description desc : specify description of this version (default: ask git)
+#   --srcdir : QEMU source tree to analyze (default: current working dir)
+#   --results-tarball : path to copy the results tarball to (default: don't
+#                       copy it anywhere, just upload it)
+#   --src-tarball : tarball to untar into src dir (default: none); this
+#                   is intended mainly for internal use by the Docker support
+#
+# User-specifiable environment variables:
+#  COVERITY_TOKEN -- Coverity token
+#  COVERITY_EMAIL -- the email address to use for uploads (default:
+#                    looks at your git user.email config)
+#  COVERITY_BUILD_CMD -- make command (default: 'make -jN' where N is
+#                    number of CPUs as determined by 'nproc')
+#  COVERITY_TOOL_BASE -- set to directory to put coverity tools
+#                        (default: /tmp/coverity-tools)
+#
+# You must specify the token, either by environment variable or by
+# putting it in a file and using --tokenfile. Everything else has
+# a reasonable default if this is run from a git tree.
+
+check_upload_permissions() {
+    # Check whether we can do an upload to the server; will exit the script
+    # with status 1 if the check failed (usually a bad token);
+    # will exit the script with status 0 if the check indicated that we
+    # can't upload yet (ie we are at quota)
+    # Assumes that PROJTOKEN, PROJNAME and DRYRUN have been initialized.
+
+    echo "Checking upload permissions..."
+
+    if ! up_perm="$(wget https://scan.coverity.com/api/upload_permitted --post-data "token=$PROJTOKEN&project=$PROJNAME" -q -O -)"; then
+        echo "Coverity Scan API access denied: bad token?"
+        exit 1
+    fi
+
+    # Really up_perm is a JSON response with either
+    # {upload_permitted:true} or {next_upload_permitted_at:<date>}
+    # We do some hacky string parsing instead of properly parsing it.
+    case "$up_perm" in
+        *upload_permitted*true*)
+            echo "Coverity Scan: upload permitted"
+            ;;
+        *next_upload_permitted_at*)
+            if [ "$DRYRUN" = yes ]; then
+                echo "Coverity Scan: upload quota reached, continuing dry run"
+            else
+                echo "Coverity Scan: upload quota reached; stopping here"
+                # Exit success as this isn't a build error.
+                exit 0
+            fi
+            ;;
+        *)
+            echo "Coverity Scan upload check: unexpected result $up_perm"
+            exit 1
+            ;;
+    esac
+}
+
+
+update_coverity_tools () {
+    # Check for whether we need to download the Coverity tools
+    # (either because we don't have a copy, or because it's out of date)
+    # Assumes that COVERITY_TOOL_BASE, PROJTOKEN and PROJNAME are set.
+
+    mkdir -p "$COVERITY_TOOL_BASE"
+    cd "$COVERITY_TOOL_BASE"
+
+    echo "Checking for new version of coverity build tools..."
+    wget https://scan.coverity.com/download/linux64 --post-data "token=$PROJTOKEN&project=$PROJNAME&md5=1" -O coverity_tool.md5.new
+
+    if ! cmp -s coverity_tool.md5 coverity_tool.md5.new; then
+        # out of date md5 or no md5: download new build tool
+        # blow away the old build tool
+        echo "Downloading coverity build tools..."
+        rm -rf coverity_tool coverity_tool.tgz
+        wget https://scan.coverity.com/download/linux64 --post-data "token=$PROJTOKEN&project=$PROJNAME" -O coverity_tool.tgz
+        if ! (cat coverity_tool.md5.new; echo "  coverity_tool.tgz") | md5sum -c --status; then
+            echo "Downloaded tarball didn't match md5sum!"
+            exit 1
+        fi
+        # extract the new one, keeping it corralled in a 'coverity_tool' directory
+        echo "Unpacking coverity build tools..."
+        mkdir -p coverity_tool
+        cd coverity_tool
+        tar xf ../coverity_tool.tgz
+        cd ..
+        mv coverity_tool.md5.new coverity_tool.md5
+    fi
+
+    rm -f coverity_tool.md5.new
+}
+
+
+# Check user-provided environment variables and arguments
+DRYRUN=no
+UPDATE_ONLY=no
+DOCKER=no
+
+while [ "$#" -ge 1 ]; do
+    case "$1" in
+        --dry-run)
+            shift
+            DRYRUN=yes
+            ;;
+        --update-tools-only)
+            shift
+            UPDATE_ONLY=yes
+            ;;
+        --version)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--version needs an argument"
+                exit 1
+            fi
+            VERSION="$1"
+            shift
+            ;;
+        --description)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--description needs an argument"
+                exit 1
+            fi
+            DESCRIPTION="$1"
+            shift
+            ;;
+        --tokenfile)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--tokenfile needs an argument"
+                exit 1
+            fi
+            COVERITY_TOKEN="$(cat "$1")"
+            shift
+            ;;
+        --srcdir)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--srcdir needs an argument"
+                exit 1
+            fi
+            SRCDIR="$1"
+            shift
+            ;;
+        --results-tarball)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--results-tarball needs an argument"
+                exit 1
+            fi
+            RESULTSTARBALL="$1"
+            shift
+            ;;
+        --src-tarball)
+            shift
+            if [ $# -eq 0 ]; then
+                echo "--src-tarball needs an argument"
+                exit 1
+            fi
+            SRCTARBALL="$1"
+            shift
+            ;;
+        --docker)
+            DOCKER=yes
+            shift
+            ;;
+        *)
+            echo "Unexpected argument '$1'"
+            exit 1
+            ;;
+    esac
+done
+
+if [ -z "$COVERITY_TOKEN" ]; then
+    echo "COVERITY_TOKEN environment variable not set"
+    exit 1
+fi
+
+if [ -z "$COVERITY_BUILD_CMD" ]; then
+    NPROC=$(nproc)
+    COVERITY_BUILD_CMD="make -j$NPROC"
+    echo "COVERITY_BUILD_CMD: using default '$COVERITY_BUILD_CMD'"
+fi
+
+if [ -z "$COVERITY_TOOL_BASE" ]; then
+    echo "COVERITY_TOOL_BASE: using default /tmp/coverity-tools"
+    COVERITY_TOOL_BASE=/tmp/coverity-tools
+fi
+
+if [ -z "$SRCDIR" ]; then
+    SRCDIR="$PWD"
+fi
+
+PROJTOKEN="$COVERITY_TOKEN"
+PROJNAME=QEMU
+TARBALL=cov-int.tar.xz
+
+if [ "$UPDATE_ONLY" = yes ] && [ "$DOCKER" = yes ]; then
+    echo "Combining --docker and --update-only is not supported"
+    exit 1
+fi
+
+if [ "$UPDATE_ONLY" = yes ]; then
+    # Just do the tools update; we don't need to check whether
+    # we are in a source tree or have upload rights for this,
+    # so do it before some of the command line and source tree checks.
+    update_coverity_tools
+    exit 0
+fi
+
+if [ ! -e "$SRCDIR" ]; then
+    mkdir "$SRCDIR"
+fi
+
+cd "$SRCDIR"
+
+if [ ! -z "$SRCTARBALL" ]; then
+    echo "Untarring source tarball into $SRCDIR..."
+    tar xvf "$SRCTARBALL"
+fi
+
+echo "Checking this is a QEMU source tree..."
+if ! [ -e "$SRCDIR/VERSION" ]; then
+    echo "Not in a QEMU source tree?"
+    exit 1
+fi
+
+# Fill in defaults used by the non-update-only process
+if [ -z "$VERSION" ]; then
+    VERSION="$(git describe --always HEAD)"
+fi
+
+if [ -z "$DESCRIPTION" ]; then
+    DESCRIPTION="$(git rev-parse HEAD)"
+fi
+
+if [ -z "$COVERITY_EMAIL" ]; then
+    COVERITY_EMAIL="$(git config user.email)"
+fi
+
+# Run ourselves inside docker if that's what the user wants
+if [ "$DOCKER" = yes ]; then
+    # build docker container including the coverity-scan tools
+    # Put the Coverity token into a temporary file that only
+    # we have read access to, and then pass it to docker build
+    # using --secret. This requires at least Docker 18.09.
+    # Mostly what we are trying to do here is ensure we don't leak
+    # the token into the Docker image.
+    umask 077
+    SECRETDIR=$(mktemp -d)
+    if [ -z "$SECRETDIR" ]; then
+        echo "Failed to create temporary directory"
+        exit 1
+    fi
+    trap 'rm -rf "$SECRETDIR"' INT TERM EXIT
+    echo "Created temporary directory $SECRETDIR"
+    SECRET="$SECRETDIR/token"
+    echo "$COVERITY_TOKEN" > "$SECRET"
+    echo "Building docker container..."
+    # TODO: This re-downloads the tools every time, rather than
+    # caching and reusing the image produced with the downloaded tools.
+    # Not sure why.
+    # TODO: how do you get 'docker build' to print the output of the
+    # commands it is running to its stdout? This would be useful for debug.
+    DOCKER_BUILDKIT=1 docker build -t coverity-scanner \
+                   --secret id=coverity.token,src="$SECRET" \
+                   -f scripts/coverity-scan/coverity-scan.docker \
+                   scripts/coverity-scan
+    echo "Archiving sources to be analyzed..."
+    ./scripts/archive-source.sh "$SECRETDIR/qemu-sources.tgz"
+    if [ "$DRYRUN" = yes ]; then
+        DRYRUNARG=--dry-run
+    fi
+    echo "Running scanner..."
+    # If we need to capture the output tarball, get the inner run to
+    # save it to the secrets directory so we can copy it out before the
+    # directory is cleaned up.
+    if [ ! -z "$RESULTSTARBALL" ]; then
+        RTARGS="--results-tarball /work/cov-int.tar.xz"
+    else
+        RTARGS=""
+    fi
+    # Arrange for this docker run to get access to the sources with -v.
+    # We pass through all the configuration from the outer script to the inner.
+    export COVERITY_EMAIL COVERITY_BUILD_CMD
+    docker run -it --env COVERITY_EMAIL --env COVERITY_BUILD_CMD \
+           -v "$SECRETDIR:/work" coverity-scanner \
+           ./run-coverity-scan --version "$VERSION" \
+           --description "$DESCRIPTION" $DRYRUNARG --tokenfile /work/token \
+           --srcdir /qemu --src-tarball /work/qemu-sources.tgz $RTARGS
+    if [ ! -z "$RESULTSTARBALL" ]; then
+        echo "Copying results tarball to $RESULTSTARBALL..."
+        cp "$SECRETDIR/cov-int.tar.xz" "$RESULTSTARBALL"
+    fi
+    echo "Docker work complete."
+    exit 0
+fi
+
+# Otherwise, continue with the full build and upload process.
+
+check_upload_permissions
+
+update_coverity_tools
+
+TOOLBIN="$(cd "$COVERITY_TOOL_BASE" && echo $PWD/coverity_tool/cov-analysis-*/bin)"
+
+if ! test -x "$TOOLBIN/cov-build"; then
+    echo "Couldn't find cov-build in the coverity build-tool directory??"
+    exit 1
+fi
+
+export PATH="$TOOLBIN:$PATH"
+
+cd "$SRCDIR"
+
+echo "Doing make distclean..."
+make distclean
+
+echo "Configuring..."
+# We configure with a fixed set of enables here to ensure that we don't
+# accidentally reduce the scope of the analysis by doing the build on
+# the system that's missing a dependency that we need to build part of
+# the codebase.
+./configure --disable-modules --enable-sdl --enable-gtk \
+    --enable-opengl --enable-vte --enable-gnutls \
+    --enable-nettle --enable-curses --enable-curl \
+    --audio-drv-list=oss,alsa,sdl,pa --enable-virtfs \
+    --enable-vnc --enable-vnc-sasl --enable-vnc-jpeg --enable-vnc-png \
+    --enable-xen --enable-brlapi \
+    --enable-linux-aio --enable-attr \
+    --enable-cap-ng --enable-trace-backends=log --enable-spice --enable-rbd \
+    --enable-xfsctl --enable-libusb --enable-usb-redir \
+    --enable-libiscsi --enable-libnfs --enable-seccomp \
+    --enable-tpm --enable-libssh --enable-lzo --enable-snappy --enable-bzip2 \
+    --enable-numa --enable-rdma --enable-smartcard --enable-virglrenderer \
+    --enable-mpath --enable-libxml2 --enable-glusterfs \
+    --enable-virtfs --enable-zstd
+
+echo "Making libqemustub.a..."
+make libqemustub.a
+
+echo "Running cov-build..."
+rm -rf cov-int
+mkdir cov-int
+cov-build --dir cov-int $COVERITY_BUILD_CMD
+
+echo "Creating results tarball..."
+tar cvf - cov-int | xz > "$TARBALL"
+
+if [ ! -z "$RESULTSTARBALL" ]; then
+    echo "Copying results tarball to $RESULTSTARBALL..."
+    cp "$TARBALL" "$RESULTSTARBALL"
+fi
+
+echo "Uploading results tarball..."
+
+if [ "$DRYRUN" = yes ]; then
+    echo "Dry run only, not uploading $TARBALL"
+    exit 0
+fi
+
+curl --form token="$PROJTOKEN" --form email="$COVERITY_EMAIL" \
+     --form file=@"$TARBALL" --form version="$VERSION" \
+     --form description="$DESCRIPTION" \
+     https://scan.coverity.com/builds?project="$PROJNAME"
+
+echo "Done."
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index af470eb..030b5c8 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -71,6 +71,8 @@
 			DOC: sections. May be specified multiple times.
 
 Output selection modifiers:
+  -sphinx-version VER   Generate rST syntax for the specified Sphinx version.
+                        Only works with reStructuredTextFormat.
   -no-doc-sections	Do not output DOC: sections.
   -enable-lineno        Enable output of #define LINENO lines. Only works with
                         reStructuredText format.
@@ -286,6 +288,7 @@
 };
 my $output_selection = OUTPUT_ALL;
 my $show_not_found = 0;	# No longer used
+my $sphinx_version = "0.0"; # if not specified, assume old
 
 my @export_file_list;
 
@@ -436,6 +439,8 @@
 	    $enable_lineno = 1;
     } elsif ($cmd eq 'show-not-found') {
 	$show_not_found = 1;  # A no-op but don't fail
+    } elsif ($cmd eq 'sphinx-version') {
+        $sphinx_version = shift @ARGV;
     } else {
 	# Unknown argument
         usage();
@@ -853,7 +858,7 @@
 
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print $1 . $parameter . ") (" . $2;
+	    print $1 . $parameter . ") (" . $2 . ")";
 	} else {
 	    print $type . " " . $parameter;
 	}
@@ -963,7 +968,16 @@
     my $oldprefix = $lineprefix;
     my $name = $args{'type'} . " " . $args{'struct'};
 
-    print "\n\n.. c:type:: " . $name . "\n\n";
+    # Sphinx 3.0 and up will emit warnings for "c:type:: struct Foo".
+    # It wants to see "c:struct:: Foo" (and will add the word 'struct' in
+    # the rendered output).
+    if ((split(/\./, $sphinx_version))[0] >= 3) {
+        my $sname = $name;
+        $sname =~ s/^struct //;
+        print "\n\n.. c:struct:: " . $sname . "\n\n";
+    } else {
+        print "\n\n.. c:type:: " . $name . "\n\n";
+    }
     print_lineno($declaration_start_line);
     $lineprefix = "   ";
     output_highlight_rst($args{'purpose'});