diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2bcd236..c63cdd0 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -111,3 +111,4 @@
 CONFIG_ACPI=y
 CONFIG_SMBIOS=y
 CONFIG_ASPEED_SOC=y
+CONFIG_GPIO_KEY=y
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index a5e787d..56d35c7 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -582,11 +582,11 @@
     g_free(nodename);
 }
 
-static DeviceState *pl061_dev;
+static DeviceState *gpio_key_dev;
 static void virt_powerdown_req(Notifier *n, void *opaque)
 {
     /* use gpio Pin 3 for power button event */
-    qemu_set_irq(qdev_get_gpio_in(pl061_dev, 3), 1);
+    qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
 }
 
 static Notifier virt_system_powerdown_notifier = {
@@ -596,6 +596,7 @@
 static void create_gpio(const VirtBoardInfo *vbi, qemu_irq *pic)
 {
     char *nodename;
+    DeviceState *pl061_dev;
     hwaddr base = vbi->memmap[VIRT_GPIO].base;
     hwaddr size = vbi->memmap[VIRT_GPIO].size;
     int irq = vbi->irqmap[VIRT_GPIO];
@@ -618,6 +619,8 @@
     qemu_fdt_setprop_string(vbi->fdt, nodename, "clock-names", "apb_pclk");
     qemu_fdt_setprop_cell(vbi->fdt, nodename, "phandle", phandle);
 
+    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
+                                        qdev_get_gpio_in(pl061_dev, 3));
     qemu_fdt_add_subnode(vbi->fdt, "/gpio-keys");
     qemu_fdt_setprop_string(vbi->fdt, "/gpio-keys", "compatible", "gpio-keys");
     qemu_fdt_setprop_cell(vbi->fdt, "/gpio-keys", "#size-cells", 0);
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index de24f42..906b712 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -26,6 +26,7 @@
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
 #include "hw/ssi/ssi.h"
+#include "qemu/bitops.h"
 
 #ifndef M25P80_ERR_DEBUG
 #define M25P80_ERR_DEBUG 0
@@ -46,7 +47,10 @@
 /* set to allow the page program command to write 0s back to 1. Useful for
  * modelling EEPROM with SPI flash command set
  */
-#define WR_1 0x100
+#define EEPROM 0x100
+
+/* 16 MiB max in 3 byte address mode */
+#define MAX_3BYTES_SIZE 0x1000000
 
 typedef struct FlashPartInfo {
     const char *part_name;
@@ -61,7 +65,7 @@
     uint32_t sector_size;
     uint32_t n_sectors;
     uint32_t page_size;
-    uint8_t flags;
+    uint16_t flags;
 } FlashPartInfo;
 
 /* adapted from linux */
@@ -79,6 +83,30 @@
 #define JEDEC_WINBOND 0xEF
 #define JEDEC_SPANSION 0x01
 
+/* Numonyx (Micron) Configuration register macros */
+#define VCFG_DUMMY 0x1
+#define VCFG_WRAP_SEQUENTIAL 0x2
+#define NVCFG_XIP_MODE_DISABLED (7 << 9)
+#define NVCFG_XIP_MODE_MASK (7 << 9)
+#define VCFG_XIP_MODE_ENABLED (1 << 3)
+#define CFG_DUMMY_CLK_LEN 4
+#define NVCFG_DUMMY_CLK_POS 12
+#define VCFG_DUMMY_CLK_POS 4
+#define EVCFG_OUT_DRIVER_STRENGHT_DEF 7
+#define EVCFG_VPP_ACCELERATOR (1 << 3)
+#define EVCFG_RESET_HOLD_ENABLED (1 << 4)
+#define NVCFG_DUAL_IO_MASK (1 << 2)
+#define EVCFG_DUAL_IO_ENABLED (1 << 6)
+#define NVCFG_QUAD_IO_MASK (1 << 3)
+#define EVCFG_QUAD_IO_ENABLED (1 << 7)
+#define NVCFG_4BYTE_ADDR_MASK (1 << 0)
+#define NVCFG_LOWER_SEGMENT_MASK (1 << 1)
+#define CFG_UPPER_128MB_SEG_ENABLED 0x3
+
+/* Numonyx (Micron) Flag Status Register macros */
+#define FSR_4BYTE_ADDR_MODE_ENABLED 0x1
+#define FSR_FLASH_READY (1 << 7)
+
 static const FlashPartInfo known_devices[] = {
     /* Atmel -- some are (confusingly) marketed as "DataFlash" */
     { INFO("at25fs010",   0x1f6601,      0,  32 << 10,   4, ER_4K) },
@@ -95,6 +123,12 @@
 
     { INFO("at45db081d",  0x1f2500,      0,  64 << 10,  16, ER_4K) },
 
+    /* Atmel EEPROMS - it is assumed, that don't care bit in command
+     * is set to 0. Block protection is not supported.
+     */
+    { INFO("at25128a-nonjedec", 0x0,     0,         1, 131072, EEPROM) },
+    { INFO("at25256a-nonjedec", 0x0,     0,         1, 262144, EEPROM) },
+
     /* EON -- en25xxx */
     { INFO("en25f32",     0x1c3116,      0,  64 << 10,  64, ER_4K) },
     { INFO("en25p32",     0x1c2016,      0,  64 << 10,  64, 0) },
@@ -206,8 +240,9 @@
     { INFO("w25q80bl",    0xef4014,      0,  64 << 10,  16, ER_4K) },
     { INFO("w25q256",     0xef4019,      0,  64 << 10, 512, ER_4K) },
 
-    /* Numonyx -- n25q128 */
     { INFO("n25q128",      0x20ba18,      0,  64 << 10, 256, 0) },
+    { INFO("n25q256a",     0x20ba19,      0,  64 << 10, 512, ER_4K) },
+    { INFO("n25q512a",     0x20ba20,      0,  64 << 10, 1024, ER_4K) },
 };
 
 typedef enum {
@@ -218,21 +253,49 @@
     WREN = 0x6,
     JEDEC_READ = 0x9f,
     BULK_ERASE = 0xc7,
+    READ_FSR = 0x70,
 
-    READ = 0x3,
-    FAST_READ = 0xb,
+    READ = 0x03,
+    READ4 = 0x13,
+    FAST_READ = 0x0b,
+    FAST_READ4 = 0x0c,
     DOR = 0x3b,
+    DOR4 = 0x3c,
     QOR = 0x6b,
+    QOR4 = 0x6c,
     DIOR = 0xbb,
+    DIOR4 = 0xbc,
     QIOR = 0xeb,
+    QIOR4 = 0xec,
 
-    PP = 0x2,
+    PP = 0x02,
+    PP4 = 0x12,
     DPP = 0xa2,
     QPP = 0x32,
 
     ERASE_4K = 0x20,
+    ERASE4_4K = 0x21,
     ERASE_32K = 0x52,
     ERASE_SECTOR = 0xd8,
+    ERASE4_SECTOR = 0xdc,
+
+    EN_4BYTE_ADDR = 0xB7,
+    EX_4BYTE_ADDR = 0xE9,
+
+    EXTEND_ADDR_READ = 0xC8,
+    EXTEND_ADDR_WRITE = 0xC5,
+
+    RESET_ENABLE = 0x66,
+    RESET_MEMORY = 0x99,
+
+    RNVCR = 0xB5,
+    WNVCR = 0xB1,
+
+    RVCR = 0x85,
+    WVCR = 0x81,
+
+    REVCR = 0x65,
+    WEVCR = 0x61,
 } FlashCMD;
 
 typedef enum {
@@ -246,8 +309,6 @@
 typedef struct Flash {
     SSISlave parent_obj;
 
-    uint32_t r;
-
     BlockBackend *blk;
 
     uint8_t *storage;
@@ -261,7 +322,13 @@
     uint8_t needed_bytes;
     uint8_t cmd_in_progress;
     uint64_t cur_addr;
+    uint32_t nonvolatile_cfg;
+    uint32_t volatile_cfg;
+    uint32_t enh_volatile_cfg;
     bool write_enable;
+    bool four_bytes_address_mode;
+    bool reset_enable;
+    uint8_t ear;
 
     int64_t dirty_page;
 
@@ -333,6 +400,7 @@
 
     switch (cmd) {
     case ERASE_4K:
+    case ERASE4_4K:
         len = 4 << 10;
         capa_to_assert = ER_4K;
         break;
@@ -341,6 +409,7 @@
         capa_to_assert = ER_32K;
         break;
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
         len = s->pi->sector_size;
         break;
     case BULK_ERASE:
@@ -387,7 +456,7 @@
                    " -> %" PRIx8 "\n", addr, prev, data);
     }
 
-    if (s->pi->flags & WR_1) {
+    if (s->pi->flags & EEPROM) {
         s->storage[s->cur_addr] = data;
     } else {
         s->storage[s->cur_addr] &= data;
@@ -397,11 +466,43 @@
     s->dirty_page = page;
 }
 
+static inline int get_addr_length(Flash *s)
+{
+   /* check if eeprom is in use */
+    if (s->pi->flags == EEPROM) {
+        return 2;
+    }
+
+   switch (s->cmd_in_progress) {
+   case PP4:
+   case READ4:
+   case QIOR4:
+   case ERASE4_4K:
+   case ERASE4_SECTOR:
+   case FAST_READ4:
+   case DOR4:
+   case QOR4:
+   case DIOR4:
+       return 4;
+   default:
+       return s->four_bytes_address_mode ? 4 : 3;
+   }
+}
+
 static void complete_collecting_data(Flash *s)
 {
-    s->cur_addr = s->data[0] << 16;
-    s->cur_addr |= s->data[1] << 8;
-    s->cur_addr |= s->data[2];
+    int i;
+
+    s->cur_addr = 0;
+
+    for (i = 0; i < get_addr_length(s); ++i) {
+        s->cur_addr <<= 8;
+        s->cur_addr |= s->data[i];
+    }
+
+    if (get_addr_length(s) == 3) {
+        s->cur_addr += (s->ear & 0x3) * MAX_3BYTES_SIZE;
+    }
 
     s->state = STATE_IDLE;
 
@@ -409,19 +510,28 @@
     case DPP:
     case QPP:
     case PP:
+    case PP4:
         s->state = STATE_PAGE_PROGRAM;
         break;
     case READ:
+    case READ4:
     case FAST_READ:
+    case FAST_READ4:
     case DOR:
+    case DOR4:
     case QOR:
+    case QOR4:
     case DIOR:
+    case DIOR4:
     case QIOR:
+    case QIOR4:
         s->state = STATE_READ;
         break;
     case ERASE_4K:
+    case ERASE4_4K:
     case ERASE_32K:
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
         flash_erase(s, s->cur_addr, s->cmd_in_progress);
         break;
     case WRSR:
@@ -429,49 +539,128 @@
             s->write_enable = false;
         }
         break;
+    case EXTEND_ADDR_WRITE:
+        s->ear = s->data[0];
+        break;
+    case WNVCR:
+        s->nonvolatile_cfg = s->data[0] | (s->data[1] << 8);
+        break;
+    case WVCR:
+        s->volatile_cfg = s->data[0];
+        break;
+    case WEVCR:
+        s->enh_volatile_cfg = s->data[0];
+        break;
     default:
         break;
     }
 }
 
+static void reset_memory(Flash *s)
+{
+    s->cmd_in_progress = NOP;
+    s->cur_addr = 0;
+    s->ear = 0;
+    s->four_bytes_address_mode = false;
+    s->len = 0;
+    s->needed_bytes = 0;
+    s->pos = 0;
+    s->state = STATE_IDLE;
+    s->write_enable = false;
+    s->reset_enable = false;
+
+    if (((s->pi->jedec >> 16) & 0xFF) == JEDEC_NUMONYX) {
+        s->volatile_cfg = 0;
+        s->volatile_cfg |= VCFG_DUMMY;
+        s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL;
+        if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK)
+                                != NVCFG_XIP_MODE_DISABLED) {
+            s->volatile_cfg |= VCFG_XIP_MODE_ENABLED;
+        }
+        s->volatile_cfg |= deposit32(s->volatile_cfg,
+                            VCFG_DUMMY_CLK_POS,
+                            CFG_DUMMY_CLK_LEN,
+                            extract32(s->nonvolatile_cfg,
+                                        NVCFG_DUMMY_CLK_POS,
+                                        CFG_DUMMY_CLK_LEN)
+                            );
+
+        s->enh_volatile_cfg = 0;
+        s->enh_volatile_cfg |= EVCFG_OUT_DRIVER_STRENGHT_DEF;
+        s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR;
+        s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED;
+        if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) {
+            s->enh_volatile_cfg |= EVCFG_DUAL_IO_ENABLED;
+        }
+        if (s->nonvolatile_cfg & NVCFG_QUAD_IO_MASK) {
+            s->enh_volatile_cfg |= EVCFG_QUAD_IO_ENABLED;
+        }
+        if (!(s->nonvolatile_cfg & NVCFG_4BYTE_ADDR_MASK)) {
+            s->four_bytes_address_mode = true;
+        }
+        if (!(s->nonvolatile_cfg & NVCFG_LOWER_SEGMENT_MASK)) {
+            s->ear = CFG_UPPER_128MB_SEG_ENABLED;
+        }
+    }
+
+    DB_PRINT_L(0, "Reset done.\n");
+}
+
 static void decode_new_cmd(Flash *s, uint32_t value)
 {
     s->cmd_in_progress = value;
     DB_PRINT_L(0, "decoded new command:%x\n", value);
 
+    if (value != RESET_MEMORY) {
+        s->reset_enable = false;
+    }
+
     switch (value) {
 
     case ERASE_4K:
+    case ERASE4_4K:
     case ERASE_32K:
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
     case READ:
+    case READ4:
     case DPP:
     case QPP:
     case PP:
-        s->needed_bytes = 3;
+    case PP4:
+        s->needed_bytes = get_addr_length(s);
         s->pos = 0;
         s->len = 0;
         s->state = STATE_COLLECTING_DATA;
         break;
 
     case FAST_READ:
+    case FAST_READ4:
     case DOR:
+    case DOR4:
     case QOR:
-        s->needed_bytes = 4;
+    case QOR4:
+        s->needed_bytes = get_addr_length(s);
+        if (((s->pi->jedec >> 16) & 0xFF) == JEDEC_NUMONYX) {
+            /* Dummy cycles modeled with bytes writes instead of bits */
+            s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
+        }
         s->pos = 0;
         s->len = 0;
         s->state = STATE_COLLECTING_DATA;
         break;
 
     case DIOR:
+    case DIOR4:
         switch ((s->pi->jedec >> 16) & 0xFF) {
         case JEDEC_WINBOND:
         case JEDEC_SPANSION:
             s->needed_bytes = 4;
             break;
-        case JEDEC_NUMONYX:
         default:
-            s->needed_bytes = 5;
+            s->needed_bytes = get_addr_length(s);
+            /* Dummy cycles modeled with bytes writes instead of bits */
+            s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
         }
         s->pos = 0;
         s->len = 0;
@@ -479,14 +668,16 @@
         break;
 
     case QIOR:
+    case QIOR4:
         switch ((s->pi->jedec >> 16) & 0xFF) {
         case JEDEC_WINBOND:
         case JEDEC_SPANSION:
             s->needed_bytes = 6;
             break;
-        case JEDEC_NUMONYX:
         default:
-            s->needed_bytes = 8;
+            s->needed_bytes = get_addr_length(s);
+            /* Dummy cycles modeled with bytes writes instead of bits */
+            s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
         }
         s->pos = 0;
         s->len = 0;
@@ -516,6 +707,16 @@
         s->state = STATE_READING_DATA;
         break;
 
+    case READ_FSR:
+        s->data[0] = FSR_FLASH_READY;
+        if (s->four_bytes_address_mode) {
+            s->data[0] |= FSR_4BYTE_ADDR_MODE_ENABLED;
+        }
+        s->pos = 0;
+        s->len = 1;
+        s->state = STATE_READING_DATA;
+        break;
+
     case JEDEC_READ:
         DB_PRINT_L(0, "populated jedec code\n");
         s->data[0] = (s->pi->jedec >> 16) & 0xff;
@@ -543,6 +744,77 @@
         break;
     case NOP:
         break;
+    case EN_4BYTE_ADDR:
+        s->four_bytes_address_mode = true;
+        break;
+    case EX_4BYTE_ADDR:
+        s->four_bytes_address_mode = false;
+        break;
+    case EXTEND_ADDR_READ:
+        s->data[0] = s->ear;
+        s->pos = 0;
+        s->len = 1;
+        s->state = STATE_READING_DATA;
+        break;
+    case EXTEND_ADDR_WRITE:
+        if (s->write_enable) {
+            s->needed_bytes = 1;
+            s->pos = 0;
+            s->len = 0;
+            s->state = STATE_COLLECTING_DATA;
+        }
+        break;
+    case RNVCR:
+        s->data[0] = s->nonvolatile_cfg & 0xFF;
+        s->data[1] = (s->nonvolatile_cfg >> 8) & 0xFF;
+        s->pos = 0;
+        s->len = 2;
+        s->state = STATE_READING_DATA;
+        break;
+    case WNVCR:
+        if (s->write_enable) {
+            s->needed_bytes = 2;
+            s->pos = 0;
+            s->len = 0;
+            s->state = STATE_COLLECTING_DATA;
+        }
+        break;
+    case RVCR:
+        s->data[0] = s->volatile_cfg & 0xFF;
+        s->pos = 0;
+        s->len = 1;
+        s->state = STATE_READING_DATA;
+        break;
+    case WVCR:
+        if (s->write_enable) {
+            s->needed_bytes = 1;
+            s->pos = 0;
+            s->len = 0;
+            s->state = STATE_COLLECTING_DATA;
+        }
+        break;
+    case REVCR:
+        s->data[0] = s->enh_volatile_cfg & 0xFF;
+        s->pos = 0;
+        s->len = 1;
+        s->state = STATE_READING_DATA;
+        break;
+    case WEVCR:
+        if (s->write_enable) {
+            s->needed_bytes = 1;
+            s->pos = 0;
+            s->len = 0;
+            s->state = STATE_COLLECTING_DATA;
+        }
+        break;
+    case RESET_ENABLE:
+        s->reset_enable = true;
+        break;
+    case RESET_MEMORY:
+        if (s->reset_enable) {
+            reset_memory(s);
+        }
+        break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Unknown cmd %x\n", value);
         break;
@@ -649,14 +921,26 @@
     return 0;
 }
 
+static void m25p80_reset(DeviceState *d)
+{
+    Flash *s = M25P80(d);
+
+    reset_memory(s);
+}
+
 static void m25p80_pre_save(void *opaque)
 {
     flash_sync_dirty((Flash *)opaque, -1);
 }
 
+static Property m25p80_properties[] = {
+    DEFINE_PROP_UINT32("nonvolatile-cfg", Flash, nonvolatile_cfg, 0x8FFF),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static const VMStateDescription vmstate_m25p80 = {
     .name = "xilinx_spi",
-    .version_id = 1,
+    .version_id = 2,
     .minimum_version_id = 1,
     .pre_save = m25p80_pre_save,
     .fields = (VMStateField[]) {
@@ -668,6 +952,12 @@
         VMSTATE_UINT8(cmd_in_progress, Flash),
         VMSTATE_UINT64(cur_addr, Flash),
         VMSTATE_BOOL(write_enable, Flash),
+        VMSTATE_BOOL_V(reset_enable, Flash, 2),
+        VMSTATE_UINT8_V(ear, Flash, 2),
+        VMSTATE_BOOL_V(four_bytes_address_mode, Flash, 2),
+        VMSTATE_UINT32_V(nonvolatile_cfg, Flash, 2),
+        VMSTATE_UINT32_V(volatile_cfg, Flash, 2),
+        VMSTATE_UINT32_V(enh_volatile_cfg, Flash, 2),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -683,6 +973,8 @@
     k->set_cs = m25p80_cs;
     k->cs_polarity = SSI_CS_LOW;
     dc->vmsd = &vmstate_m25p80;
+    dc->props = m25p80_properties;
+    dc->reset = m25p80_reset;
     mc->pi = data;
 }
 
diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs
index 52233f7..a43c7cf 100644
--- a/hw/gpio/Makefile.objs
+++ b/hw/gpio/Makefile.objs
@@ -3,6 +3,7 @@
 common-obj-$(CONFIG_PUV3) += puv3_gpio.o
 common-obj-$(CONFIG_ZAURUS) += zaurus.o
 common-obj-$(CONFIG_E500) += mpc8xxx.o
+common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o
 
 obj-$(CONFIG_OMAP) += omap_gpio.o
 obj-$(CONFIG_IMX) += imx_gpio.o
diff --git a/hw/gpio/gpio_key.c b/hw/gpio/gpio_key.c
new file mode 100644
index 0000000..ef28772
--- /dev/null
+++ b/hw/gpio/gpio_key.c
@@ -0,0 +1,104 @@
+/*
+ * GPIO key
+ *
+ * Copyright (c) 2016 Linaro Limited
+ *
+ * Author: Shannon Zhao <shannon.zhao@linaro.org>
+ *
+ * Emulate a (human) keypress -- when the key is triggered by
+ * setting the incoming gpio line, the outbound irq line is
+ * raised for 100ms before being dropped again.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+
+#define TYPE_GPIOKEY "gpio-key"
+#define GPIOKEY(obj) OBJECT_CHECK(GPIOKEYState, (obj), TYPE_GPIOKEY)
+#define GPIO_KEY_LATENCY 100 /* 100ms */
+
+typedef struct GPIOKEYState {
+    SysBusDevice parent_obj;
+
+    QEMUTimer *timer;
+    qemu_irq irq;
+} GPIOKEYState;
+
+static const VMStateDescription vmstate_gpio_key = {
+    .name = "gpio-key",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER_PTR(timer, GPIOKEYState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void gpio_key_reset(DeviceState *dev)
+{
+    GPIOKEYState *s = GPIOKEY(dev);
+
+    timer_del(s->timer);
+}
+
+static void gpio_key_timer_expired(void *opaque)
+{
+    GPIOKEYState *s = (GPIOKEYState *)opaque;
+
+    qemu_set_irq(s->irq, 0);
+    timer_del(s->timer);
+}
+
+static void gpio_key_set_irq(void *opaque, int irq, int level)
+{
+    GPIOKEYState *s = (GPIOKEYState *)opaque;
+
+    qemu_set_irq(s->irq, 1);
+    timer_mod(s->timer,
+              qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + GPIO_KEY_LATENCY);
+}
+
+static void gpio_key_realize(DeviceState *dev, Error **errp)
+{
+    GPIOKEYState *s = GPIOKEY(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    sysbus_init_irq(sbd, &s->irq);
+    qdev_init_gpio_in(dev, gpio_key_set_irq, 1);
+    s->timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, gpio_key_timer_expired, s);
+}
+
+static void gpio_key_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = gpio_key_realize;
+    dc->vmsd = &vmstate_gpio_key;
+    dc->reset = &gpio_key_reset;
+}
+
+static const TypeInfo gpio_key_info = {
+    .name          = TYPE_GPIOKEY,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(GPIOKEYState),
+    .class_init    = gpio_key_class_init,
+};
+
+static void gpio_key_register_types(void)
+{
+    type_register_static(&gpio_key_info);
+}
+
+type_init(gpio_key_register_types)
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 6695fa7..0e18f15 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -306,6 +306,15 @@
  */
 int kvm_create_device(KVMState *s, uint64_t type, bool test);
 
+/**
+ * kvm_device_supported - probe whether KVM supports specific device
+ *
+ * @vmfd: The fd handler for VM
+ * @type: type of device
+ *
+ * @return: true if supported, otherwise false.
+ */
+bool kvm_device_supported(int vmfd, uint64_t type);
 
 /* Arch specific hooks */
 
diff --git a/kvm-all.c b/kvm-all.c
index 44c0464..e7b66df 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -2339,6 +2339,21 @@
     return test ? 0 : create_dev.fd;
 }
 
+bool kvm_device_supported(int vmfd, uint64_t type)
+{
+    struct kvm_create_device create_dev = {
+        .type = type,
+        .fd = -1,
+        .flags = KVM_CREATE_DEVICE_TEST,
+    };
+
+    if (ioctl(vmfd, KVM_CHECK_EXTENSION, KVM_CAP_DEVICE_CTRL) <= 0) {
+        return false;
+    }
+
+    return (ioctl(vmfd, KVM_CREATE_DEVICE, &create_dev) >= 0);
+}
+
 int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source)
 {
     struct kvm_one_reg reg;
diff --git a/monitor.c b/monitor.c
index 955ed35..d1c1930 100644
--- a/monitor.c
+++ b/monitor.c
@@ -4259,3 +4259,11 @@
     error_setg(errp, QERR_FEATURE_DISABLED, "dump-skeys");
 }
 #endif
+
+#ifndef TARGET_ARM
+GICCapabilityList *qmp_query_gic_capabilities(Error **errp)
+{
+    error_setg(errp, QERR_FEATURE_DISABLED, "query-gic-capabilities");
+    return NULL;
+}
+#endif
diff --git a/qapi-schema.json b/qapi-schema.json
index 8907790..e58f6a9 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -4134,3 +4134,39 @@
 ##
 { 'enum': 'ReplayMode',
   'data': [ 'none', 'record', 'play' ] }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version:  version of GIC to be described. Currently, only 2 and 3
+#            are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+#            device in user space.
+#
+# @kernel:   whether current QEMU/hardware supports hardware
+#            accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+  'data': { 'version': 'int',
+            'emulated': 'bool',
+            'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 9e05365..de896a5 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -4853,3 +4853,30 @@
                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3840,
                   "pop-vlan": 1, "id": 251658240}
    ]}
+
+EQMP
+
+#if defined TARGET_ARM
+    {
+        .name       = "query-gic-capabilities",
+        .args_type  = "",
+        .mhandler.cmd_new = qmp_marshal_query_gic_capabilities,
+    },
+#endif
+
+SQMP
+query-gic-capabilities
+---------------
+
+Return a list of GICCapability objects, describing supported GIC
+(Generic Interrupt Controller) versions.
+
+Arguments: None
+
+Example:
+
+-> { "execute": "query-gic-capabilities" }
+<- { "return": [{ "version": 2, "emulated": true, "kernel": false },
+                { "version": 3, "emulated": false, "kernel": true } ] }
+
+EQMP
diff --git a/target-arm/Makefile.objs b/target-arm/Makefile.objs
index a80eb39..82cbe6b 100644
--- a/target-arm/Makefile.objs
+++ b/target-arm/Makefile.objs
@@ -1,5 +1,5 @@
 obj-y += arm-semi.o
-obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o
+obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o
 obj-$(CONFIG_KVM) += kvm.o
 obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o
 obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index 969ab0b..3671032 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -62,13 +62,18 @@
         goto err;
     }
 
+    if (!init) {
+        /* Caller doesn't want the VCPU to be initialized, so skip it */
+        goto finish;
+    }
+
     ret = ioctl(vmfd, KVM_ARM_PREFERRED_TARGET, init);
     if (ret >= 0) {
         ret = ioctl(cpufd, KVM_ARM_VCPU_INIT, init);
         if (ret < 0) {
             goto err;
         }
-    } else {
+    } else if (cpus_to_try) {
         /* Old kernel which doesn't know about the
          * PREFERRED_TARGET ioctl: we know it will only support
          * creating one kind of guest CPU which is its preferred
@@ -85,8 +90,15 @@
         if (ret < 0) {
             goto err;
         }
+    } else {
+        /* Treat a NULL cpus_to_try argument the same as an empty
+         * list, which means we will fail the call since this must
+         * be an old kernel which doesn't support PREFERRED_TARGET.
+         */
+        goto err;
     }
 
+finish:
     fdarray[0] = kvmfd;
     fdarray[1] = vmfd;
     fdarray[2] = cpufd;
diff --git a/target-arm/kvm_arm.h b/target-arm/kvm_arm.h
index 07f0c72..345233c 100644
--- a/target-arm/kvm_arm.h
+++ b/target-arm/kvm_arm.h
@@ -124,9 +124,12 @@
  * kvm_arm_create_scratch_host_vcpu:
  * @cpus_to_try: array of QEMU_KVM_ARM_TARGET_* values (terminated with
  * QEMU_KVM_ARM_TARGET_NONE) to try as fallback if the kernel does not
- * know the PREFERRED_TARGET ioctl
+ * know the PREFERRED_TARGET ioctl. Passing NULL is the same as passing
+ * an empty array.
  * @fdarray: filled in with kvmfd, vmfd, cpufd file descriptors in that order
- * @init: filled in with the necessary values for creating a host vcpu
+ * @init: filled in with the necessary values for creating a host
+ * vcpu. If NULL is provided, will not init the vCPU (though the cpufd
+ * will still be set up).
  *
  * Create a scratch vcpu in its own VM of the type preferred by the host
  * kernel (as would be used for '-cpu host'), for purposes of probing it
diff --git a/target-arm/monitor.c b/target-arm/monitor.c
new file mode 100644
index 0000000..1ee59a2
--- /dev/null
+++ b/target-arm/monitor.c
@@ -0,0 +1,84 @@
+/*
+ * QEMU monitor.c for ARM.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "qemu/osdep.h"
+#include "qmp-commands.h"
+#include "hw/boards.h"
+#include "kvm_arm.h"
+
+static GICCapability *gic_cap_new(int version)
+{
+    GICCapability *cap = g_new0(GICCapability, 1);
+    cap->version = version;
+    /* by default, support none */
+    cap->emulated = false;
+    cap->kernel = false;
+    return cap;
+}
+
+static GICCapabilityList *gic_cap_list_add(GICCapabilityList *head,
+                                           GICCapability *cap)
+{
+    GICCapabilityList *item = g_new0(GICCapabilityList, 1);
+    item->value = cap;
+    item->next = head;
+    return item;
+}
+
+static inline void gic_cap_kvm_probe(GICCapability *v2, GICCapability *v3)
+{
+#ifdef CONFIG_KVM
+    int fdarray[3];
+
+    if (!kvm_arm_create_scratch_host_vcpu(NULL, fdarray, NULL)) {
+        return;
+    }
+
+    /* Test KVM GICv2 */
+    if (kvm_device_supported(fdarray[1], KVM_DEV_TYPE_ARM_VGIC_V2)) {
+        v2->kernel = true;
+    }
+
+    /* Test KVM GICv3 */
+    if (kvm_device_supported(fdarray[1], KVM_DEV_TYPE_ARM_VGIC_V3)) {
+        v3->kernel = true;
+    }
+
+    kvm_arm_destroy_scratch_host_vcpu(fdarray);
+#endif
+}
+
+GICCapabilityList *qmp_query_gic_capabilities(Error **errp)
+{
+    GICCapabilityList *head = NULL;
+    GICCapability *v2 = gic_cap_new(2), *v3 = gic_cap_new(3);
+
+    v2->emulated = true;
+    /* TODO: we'd change to true after we get emulated GICv3. */
+    v3->emulated = false;
+
+    gic_cap_kvm_probe(v2, v3);
+
+    head = gic_cap_list_add(head, v2);
+    head = gic_cap_list_add(head, v3);
+
+    return head;
+}