| == General == |
| |
| A qcow2 image file is organized in units of constant size, which are called |
| (host) clusters. A cluster is the unit in which all allocations are done, |
| both for actual guest data and for image metadata. |
| |
| Likewise, the virtual disk as seen by the guest is divided into (guest) |
| clusters of the same size. |
| |
| All numbers in qcow2 are stored in Big Endian byte order. |
| |
| |
| == Header == |
| |
| The first cluster of a qcow2 image contains the file header: |
| |
| Byte 0 - 3: magic |
| QCOW magic string ("QFI\xfb") |
| |
| 4 - 7: version |
| Version number (valid values are 2 and 3) |
| |
| 8 - 15: backing_file_offset |
| Offset into the image file at which the backing file name |
| is stored (NB: The string is not null terminated). 0 if the |
| image doesn't have a backing file. |
| |
| 16 - 19: backing_file_size |
| Length of the backing file name in bytes. Must not be |
| longer than 1023 bytes. Undefined if the image doesn't have |
| a backing file. |
| |
| 20 - 23: cluster_bits |
| Number of bits that are used for addressing an offset |
| within a cluster (1 << cluster_bits is the cluster size). |
| Must not be less than 9 (i.e. 512 byte clusters). |
| |
| Note: qemu as of today has an implementation limit of 2 MB |
| as the maximum cluster size and won't be able to open images |
| with larger cluster sizes. |
| |
| 24 - 31: size |
| Virtual disk size in bytes. |
| |
| Note: qemu has an implementation limit of 32 MB as |
| the maximum L1 table size. With a 2 MB cluster |
| size, it is unable to populate a virtual cluster |
| beyond 2 EB (61 bits); with a 512 byte cluster |
| size, it is unable to populate a virtual size |
| larger than 128 GB (37 bits). Meanwhile, L1/L2 |
| table layouts limit an image to no more than 64 PB |
| (56 bits) of populated clusters, and an image may |
| hit other limits first (such as a file system's |
| maximum size). |
| |
| 32 - 35: crypt_method |
| 0 for no encryption |
| 1 for AES encryption |
| 2 for LUKS encryption |
| |
| 36 - 39: l1_size |
| Number of entries in the active L1 table |
| |
| 40 - 47: l1_table_offset |
| Offset into the image file at which the active L1 table |
| starts. Must be aligned to a cluster boundary. |
| |
| 48 - 55: refcount_table_offset |
| Offset into the image file at which the refcount table |
| starts. Must be aligned to a cluster boundary. |
| |
| 56 - 59: refcount_table_clusters |
| Number of clusters that the refcount table occupies |
| |
| 60 - 63: nb_snapshots |
| Number of snapshots contained in the image |
| |
| 64 - 71: snapshots_offset |
| Offset into the image file at which the snapshot table |
| starts. Must be aligned to a cluster boundary. |
| |
| For version 2, the header is exactly 72 bytes in length, and finishes here. |
| For version 3 or higher, the header length is at least 104 bytes, including |
| the next fields through header_length. |
| |
| 72 - 79: incompatible_features |
| Bitmask of incompatible features. An implementation must |
| fail to open an image if an unknown bit is set. |
| |
| Bit 0: Dirty bit. If this bit is set then refcounts |
| may be inconsistent, make sure to scan L1/L2 |
| tables to repair refcounts before accessing the |
| image. |
| |
| Bit 1: Corrupt bit. If this bit is set then any data |
| structure may be corrupt and the image must not |
| be written to (unless for regaining |
| consistency). |
| |
| Bit 2: External data file bit. If this bit is set, an |
| external data file is used. Guest clusters are |
| then stored in the external data file. For such |
| images, clusters in the external data file are |
| not refcounted. The offset field in the |
| Standard Cluster Descriptor must match the |
| guest offset and neither compressed clusters |
| nor internal snapshots are supported. |
| |
| An External Data File Name header extension may |
| be present if this bit is set. |
| |
| Bit 3: Compression type bit. If this bit is set, |
| a non-default compression is used for compressed |
| clusters. The compression_type field must be |
| present and not zero. |
| |
| Bits 4-63: Reserved (set to 0) |
| |
| 80 - 87: compatible_features |
| Bitmask of compatible features. An implementation can |
| safely ignore any unknown bits that are set. |
| |
| Bit 0: Lazy refcounts bit. If this bit is set then |
| lazy refcount updates can be used. This means |
| marking the image file dirty and postponing |
| refcount metadata updates. |
| |
| Bits 1-63: Reserved (set to 0) |
| |
| 88 - 95: autoclear_features |
| Bitmask of auto-clear features. An implementation may only |
| write to an image with unknown auto-clear features if it |
| clears the respective bits from this field first. |
| |
| Bit 0: Bitmaps extension bit |
| This bit indicates consistency for the bitmaps |
| extension data. |
| |
| It is an error if this bit is set without the |
| bitmaps extension present. |
| |
| If the bitmaps extension is present but this |
| bit is unset, the bitmaps extension data must be |
| considered inconsistent. |
| |
| Bit 1: Raw external data bit |
| If this bit is set, the external data file can |
| be read as a consistent standalone raw image |
| without looking at the qcow2 metadata. |
| |
| Setting this bit has a performance impact for |
| some operations on the image (e.g. writing |
| zeros requires writing to the data file instead |
| of only setting the zero flag in the L2 table |
| entry) and conflicts with backing files. |
| |
| This bit may only be set if the External Data |
| File bit (incompatible feature bit 1) is also |
| set. |
| |
| Bits 2-63: Reserved (set to 0) |
| |
| 96 - 99: refcount_order |
| Describes the width of a reference count block entry (width |
| in bits: refcount_bits = 1 << refcount_order). For version 2 |
| images, the order is always assumed to be 4 |
| (i.e. refcount_bits = 16). |
| This value may not exceed 6 (i.e. refcount_bits = 64). |
| |
| 100 - 103: header_length |
| Length of the header structure in bytes. For version 2 |
| images, the length is always assumed to be 72 bytes. |
| For version 3 it's at least 104 bytes and must be a multiple |
| of 8. |
| |
| |
| === Additional fields (version 3 and higher) === |
| |
| In general, these fields are optional and may be safely ignored by the software, |
| as well as filled by zeros (which is equal to field absence), if software needs |
| to set field B, but does not care about field A which precedes B. More |
| formally, additional fields have the following compatibility rules: |
| |
| 1. If the value of the additional field must not be ignored for correct |
| handling of the file, it will be accompanied by a corresponding incompatible |
| feature bit. |
| |
| 2. If there are no unrecognized incompatible feature bits set, an unknown |
| additional field may be safely ignored other than preserving its value when |
| rewriting the image header. |
| |
| 3. An explicit value of 0 will have the same behavior as when the field is not |
| present*, if not altered by a specific incompatible bit. |
| |
| *. A field is considered not present when header_length is less than or equal |
| to the field's offset. Also, all additional fields are not present for |
| version 2. |
| |
| 104: compression_type |
| |
| Defines the compression method used for compressed clusters. |
| All compressed clusters in an image use the same compression |
| type. |
| |
| If the incompatible bit "Compression type" is set: the field |
| must be present and non-zero (which means non-zlib |
| compression type). Otherwise, this field must not be present |
| or must be zero (which means zlib). |
| |
| Available compression type values: |
| 0: zlib <https://www.zlib.net/> |
| |
| |
| === Header padding === |
| |
| @header_length must be a multiple of 8, which means that if the end of the last |
| additional field is not aligned, some padding is needed. This padding must be |
| zeroed, so that if some existing (or future) additional field will fall into |
| the padding, it will be interpreted accordingly to point [3.] of the previous |
| paragraph, i.e. in the same manner as when this field is not present. |
| |
| |
| === Header extensions === |
| |
| Directly after the image header, optional sections called header extensions can |
| be stored. Each extension has a structure like the following: |
| |
| Byte 0 - 3: Header extension type: |
| 0x00000000 - End of the header extension area |
| 0xE2792ACA - Backing file format name string |
| 0x6803f857 - Feature name table |
| 0x23852875 - Bitmaps extension |
| 0x0537be77 - Full disk encryption header pointer |
| 0x44415441 - External data file name string |
| other - Unknown header extension, can be safely |
| ignored |
| |
| 4 - 7: Length of the header extension data |
| |
| 8 - n: Header extension data |
| |
| n - m: Padding to round up the header extension size to the next |
| multiple of 8. |
| |
| Unless stated otherwise, each header extension type shall appear at most once |
| in the same image. |
| |
| If the image has a backing file then the backing file name should be stored in |
| the remaining space between the end of the header extension area and the end of |
| the first cluster. It is not allowed to store other data here, so that an |
| implementation can safely modify the header and add extensions without harming |
| data of compatible features that it doesn't support. Compatible features that |
| need space for additional data can use a header extension. |
| |
| |
| == String header extensions == |
| |
| Some header extensions (such as the backing file format name and the external |
| data file name) are just a single string. In this case, the header extension |
| length is the string length and the string is not '\0' terminated. (The header |
| extension padding can make it look like a string is '\0' terminated, but |
| neither is padding always necessary nor is there a guarantee that zero bytes |
| are used for padding.) |
| |
| |
| == Feature name table == |
| |
| The feature name table is an optional header extension that contains the name |
| for features used by the image. It can be used by applications that don't know |
| the respective feature (e.g. because the feature was introduced only later) to |
| display a useful error message. |
| |
| The number of entries in the feature name table is determined by the length of |
| the header extension data. Each entry look like this: |
| |
| Byte 0: Type of feature (select feature bitmap) |
| 0: Incompatible feature |
| 1: Compatible feature |
| 2: Autoclear feature |
| |
| 1: Bit number within the selected feature bitmap (valid |
| values: 0-63) |
| |
| 2 - 47: Feature name (padded with zeros, but not necessarily null |
| terminated if it has full length) |
| |
| |
| == Bitmaps extension == |
| |
| The bitmaps extension is an optional header extension. It provides the ability |
| to store bitmaps related to a virtual disk. For now, there is only one bitmap |
| type: the dirty tracking bitmap, which tracks virtual disk changes from some |
| point in time. |
| |
| The data of the extension should be considered consistent only if the |
| corresponding auto-clear feature bit is set, see autoclear_features above. |
| |
| The fields of the bitmaps extension are: |
| |
| Byte 0 - 3: nb_bitmaps |
| The number of bitmaps contained in the image. Must be |
| greater than or equal to 1. |
| |
| Note: Qemu currently only supports up to 65535 bitmaps per |
| image. |
| |
| 4 - 7: Reserved, must be zero. |
| |
| 8 - 15: bitmap_directory_size |
| Size of the bitmap directory in bytes. It is the cumulative |
| size of all (nb_bitmaps) bitmap directory entries. |
| |
| 16 - 23: bitmap_directory_offset |
| Offset into the image file at which the bitmap directory |
| starts. Must be aligned to a cluster boundary. |
| |
| == Full disk encryption header pointer == |
| |
| The full disk encryption header must be present if, and only if, the |
| 'crypt_method' header requires metadata. Currently this is only true |
| of the 'LUKS' crypt method. The header extension must be absent for |
| other methods. |
| |
| This header provides the offset at which the crypt method can store |
| its additional data, as well as the length of such data. |
| |
| Byte 0 - 7: Offset into the image file at which the encryption |
| header starts in bytes. Must be aligned to a cluster |
| boundary. |
| Byte 8 - 15: Length of the written encryption header in bytes. |
| Note actual space allocated in the qcow2 file may |
| be larger than this value, since it will be rounded |
| to the nearest multiple of the cluster size. Any |
| unused bytes in the allocated space will be initialized |
| to 0. |
| |
| For the LUKS crypt method, the encryption header works as follows. |
| |
| The first 592 bytes of the header clusters will contain the LUKS |
| partition header. This is then followed by the key material data areas. |
| The size of the key material data areas is determined by the number of |
| stripes in the key slot and key size. Refer to the LUKS format |
| specification ('docs/on-disk-format.pdf' in the cryptsetup source |
| package) for details of the LUKS partition header format. |
| |
| In the LUKS partition header, the "payload-offset" field will be |
| calculated as normal for the LUKS spec. ie the size of the LUKS |
| header, plus key material regions, plus padding, relative to the |
| start of the LUKS header. This offset value is not required to be |
| qcow2 cluster aligned. Its value is currently never used in the |
| context of qcow2, since the qcow2 file format itself defines where |
| the real payload offset is, but none the less a valid payload offset |
| should always be present. |
| |
| In the LUKS key slots header, the "key-material-offset" is relative |
| to the start of the LUKS header clusters in the qcow2 container, |
| not the start of the qcow2 file. |
| |
| Logically the layout looks like |
| |
| +-----------------------------+ |
| | QCow2 header | |
| | QCow2 header extension X | |
| | QCow2 header extension FDE | |
| | QCow2 header extension ... | |
| | QCow2 header extension Z | |
| +-----------------------------+ |
| | ....other QCow2 tables.... | |
| . . |
| . . |
| +-----------------------------+ |
| | +-------------------------+ | |
| | | LUKS partition header | | |
| | +-------------------------+ | |
| | | LUKS key material 1 | | |
| | +-------------------------+ | |
| | | LUKS key material 2 | | |
| | +-------------------------+ | |
| | | LUKS key material ... | | |
| | +-------------------------+ | |
| | | LUKS key material 8 | | |
| | +-------------------------+ | |
| +-----------------------------+ |
| | QCow2 cluster payload | |
| . . |
| . . |
| . . |
| | | |
| +-----------------------------+ |
| |
| == Data encryption == |
| |
| When an encryption method is requested in the header, the image payload |
| data must be encrypted/decrypted on every write/read. The image headers |
| and metadata are never encrypted. |
| |
| The algorithms used for encryption vary depending on the method |
| |
| - AES: |
| |
| The AES cipher, in CBC mode, with 256 bit keys. |
| |
| Initialization vectors generated using plain64 method, with |
| the virtual disk sector as the input tweak. |
| |
| This format is no longer supported in QEMU system emulators, due |
| to a number of design flaws affecting its security. It is only |
| supported in the command line tools for the sake of back compatibility |
| and data liberation. |
| |
| - LUKS: |
| |
| The algorithms are specified in the LUKS header. |
| |
| Initialization vectors generated using the method specified |
| in the LUKS header, with the physical disk sector as the |
| input tweak. |
| |
| == Host cluster management == |
| |
| qcow2 manages the allocation of host clusters by maintaining a reference count |
| for each host cluster. A refcount of 0 means that the cluster is free, 1 means |
| that it is used, and >= 2 means that it is used and any write access must |
| perform a COW (copy on write) operation. |
| |
| The refcounts are managed in a two-level table. The first level is called |
| refcount table and has a variable size (which is stored in the header). The |
| refcount table can cover multiple clusters, however it needs to be contiguous |
| in the image file. |
| |
| It contains pointers to the second level structures which are called refcount |
| blocks and are exactly one cluster in size. |
| |
| Although a large enough refcount table can reserve clusters past 64 PB |
| (56 bits) (assuming the underlying protocol can even be sized that |
| large), note that some qcow2 metadata such as L1/L2 tables must point |
| to clusters prior to that point. |
| |
| Note: qemu has an implementation limit of 8 MB as the maximum refcount |
| table size. With a 2 MB cluster size and a default refcount_order of |
| 4, it is unable to reference host resources beyond 2 EB (61 bits); in |
| the worst case, with a 512 cluster size and refcount_order of 6, it is |
| unable to access beyond 32 GB (35 bits). |
| |
| Given an offset into the image file, the refcount of its cluster can be |
| obtained as follows: |
| |
| refcount_block_entries = (cluster_size * 8 / refcount_bits) |
| |
| refcount_block_index = (offset / cluster_size) % refcount_block_entries |
| refcount_table_index = (offset / cluster_size) / refcount_block_entries |
| |
| refcount_block = load_cluster(refcount_table[refcount_table_index]); |
| return refcount_block[refcount_block_index]; |
| |
| Refcount table entry: |
| |
| Bit 0 - 8: Reserved (set to 0) |
| |
| 9 - 63: Bits 9-63 of the offset into the image file at which the |
| refcount block starts. Must be aligned to a cluster |
| boundary. |
| |
| If this is 0, the corresponding refcount block has not yet |
| been allocated. All refcounts managed by this refcount block |
| are 0. |
| |
| Refcount block entry (x = refcount_bits - 1): |
| |
| Bit 0 - x: Reference count of the cluster. If refcount_bits implies a |
| sub-byte width, note that bit 0 means the least significant |
| bit in this context. |
| |
| |
| == Cluster mapping == |
| |
| Just as for refcounts, qcow2 uses a two-level structure for the mapping of |
| guest clusters to host clusters. They are called L1 and L2 table. |
| |
| The L1 table has a variable size (stored in the header) and may use multiple |
| clusters, however it must be contiguous in the image file. L2 tables are |
| exactly one cluster in size. |
| |
| The L1 and L2 tables have implications on the maximum virtual file |
| size; for a given L1 table size, a larger cluster size is required for |
| the guest to have access to more space. Furthermore, a virtual |
| cluster must currently map to a host offset below 64 PB (56 bits) |
| (although this limit could be relaxed by putting reserved bits into |
| use). Additionally, as cluster size increases, the maximum host |
| offset for a compressed cluster is reduced (a 2M cluster size requires |
| compressed clusters to reside below 512 TB (49 bits), and this limit |
| cannot be relaxed without an incompatible layout change). |
| |
| Given an offset into the virtual disk, the offset into the image file can be |
| obtained as follows: |
| |
| l2_entries = (cluster_size / sizeof(uint64_t)) |
| |
| l2_index = (offset / cluster_size) % l2_entries |
| l1_index = (offset / cluster_size) / l2_entries |
| |
| l2_table = load_cluster(l1_table[l1_index]); |
| cluster_offset = l2_table[l2_index]; |
| |
| return cluster_offset + (offset % cluster_size) |
| |
| L1 table entry: |
| |
| Bit 0 - 8: Reserved (set to 0) |
| |
| 9 - 55: Bits 9-55 of the offset into the image file at which the L2 |
| table starts. Must be aligned to a cluster boundary. If the |
| offset is 0, the L2 table and all clusters described by this |
| L2 table are unallocated. |
| |
| 56 - 62: Reserved (set to 0) |
| |
| 63: 0 for an L2 table that is unused or requires COW, 1 if its |
| refcount is exactly one. This information is only accurate |
| in the active L1 table. |
| |
| L2 table entry: |
| |
| Bit 0 - 61: Cluster descriptor |
| |
| 62: 0 for standard clusters |
| 1 for compressed clusters |
| |
| 63: 0 for clusters that are unused, compressed or require COW. |
| 1 for standard clusters whose refcount is exactly one. |
| This information is only accurate in L2 tables |
| that are reachable from the active L1 table. |
| |
| With external data files, all guest clusters have an |
| implicit refcount of 1 (because of the fixed host = guest |
| mapping for guest cluster offsets), so this bit should be 1 |
| for all allocated clusters. |
| |
| Standard Cluster Descriptor: |
| |
| Bit 0: If set to 1, the cluster reads as all zeros. The host |
| cluster offset can be used to describe a preallocation, |
| but it won't be used for reading data from this cluster, |
| nor is data read from the backing file if the cluster is |
| unallocated. |
| |
| With version 2, this is always 0. |
| |
| 1 - 8: Reserved (set to 0) |
| |
| 9 - 55: Bits 9-55 of host cluster offset. Must be aligned to a |
| cluster boundary. If the offset is 0 and bit 63 is clear, |
| the cluster is unallocated. The offset may only be 0 with |
| bit 63 set (indicating a host cluster offset of 0) when an |
| external data file is used. |
| |
| 56 - 61: Reserved (set to 0) |
| |
| |
| Compressed Clusters Descriptor (x = 62 - (cluster_bits - 8)): |
| |
| Bit 0 - x-1: Host cluster offset. This is usually _not_ aligned to a |
| cluster or sector boundary! If cluster_bits is |
| small enough that this field includes bits beyond |
| 55, those upper bits must be set to 0. |
| |
| x - 61: Number of additional 512-byte sectors used for the |
| compressed data, beyond the sector containing the offset |
| in the previous field. Some of these sectors may reside |
| in the next contiguous host cluster. |
| |
| Note that the compressed data does not necessarily occupy |
| all of the bytes in the final sector; rather, decompression |
| stops when it has produced a cluster of data. |
| |
| Another compressed cluster may map to the tail of the final |
| sector used by this compressed cluster. |
| |
| If a cluster is unallocated, read requests shall read the data from the backing |
| file (except if bit 0 in the Standard Cluster Descriptor is set). If there is |
| no backing file or the backing file is smaller than the image, they shall read |
| zeros for all parts that are not covered by the backing file. |
| |
| |
| == Snapshots == |
| |
| qcow2 supports internal snapshots. Their basic principle of operation is to |
| switch the active L1 table, so that a different set of host clusters are |
| exposed to the guest. |
| |
| When creating a snapshot, the L1 table should be copied and the refcount of all |
| L2 tables and clusters reachable from this L1 table must be increased, so that |
| a write causes a COW and isn't visible in other snapshots. |
| |
| When loading a snapshot, bit 63 of all entries in the new active L1 table and |
| all L2 tables referenced by it must be reconstructed from the refcount table |
| as it doesn't need to be accurate in inactive L1 tables. |
| |
| A directory of all snapshots is stored in the snapshot table, a contiguous area |
| in the image file, whose starting offset and length are given by the header |
| fields snapshots_offset and nb_snapshots. The entries of the snapshot table |
| have variable length, depending on the length of ID, name and extra data. |
| |
| Snapshot table entry: |
| |
| Byte 0 - 7: Offset into the image file at which the L1 table for the |
| snapshot starts. Must be aligned to a cluster boundary. |
| |
| 8 - 11: Number of entries in the L1 table of the snapshots |
| |
| 12 - 13: Length of the unique ID string describing the snapshot |
| |
| 14 - 15: Length of the name of the snapshot |
| |
| 16 - 19: Time at which the snapshot was taken in seconds since the |
| Epoch |
| |
| 20 - 23: Subsecond part of the time at which the snapshot was taken |
| in nanoseconds |
| |
| 24 - 31: Time that the guest was running until the snapshot was |
| taken in nanoseconds |
| |
| 32 - 35: Size of the VM state in bytes. 0 if no VM state is saved. |
| If there is VM state, it starts at the first cluster |
| described by first L1 table entry that doesn't describe a |
| regular guest cluster (i.e. VM state is stored like guest |
| disk content, except that it is stored at offsets that are |
| larger than the virtual disk presented to the guest) |
| |
| 36 - 39: Size of extra data in the table entry (used for future |
| extensions of the format) |
| |
| variable: Extra data for future extensions. Unknown fields must be |
| ignored. Currently defined are (offset relative to snapshot |
| table entry): |
| |
| Byte 40 - 47: Size of the VM state in bytes. 0 if no VM |
| state is saved. If this field is present, |
| the 32-bit value in bytes 32-35 is ignored. |
| |
| Byte 48 - 55: Virtual disk size of the snapshot in bytes |
| |
| Version 3 images must include extra data at least up to |
| byte 55. |
| |
| variable: Unique ID string for the snapshot (not null terminated) |
| |
| variable: Name of the snapshot (not null terminated) |
| |
| variable: Padding to round up the snapshot table entry size to the |
| next multiple of 8. |
| |
| |
| == Bitmaps == |
| |
| As mentioned above, the bitmaps extension provides the ability to store bitmaps |
| related to a virtual disk. This section describes how these bitmaps are stored. |
| |
| All stored bitmaps are related to the virtual disk stored in the same image, so |
| each bitmap size is equal to the virtual disk size. |
| |
| Each bit of the bitmap is responsible for strictly defined range of the virtual |
| disk. For bit number bit_nr the corresponding range (in bytes) will be: |
| |
| [bit_nr * bitmap_granularity .. (bit_nr + 1) * bitmap_granularity - 1] |
| |
| Granularity is a property of the concrete bitmap, see below. |
| |
| |
| === Bitmap directory === |
| |
| Each bitmap saved in the image is described in a bitmap directory entry. The |
| bitmap directory is a contiguous area in the image file, whose starting offset |
| and length are given by the header extension fields bitmap_directory_offset and |
| bitmap_directory_size. The entries of the bitmap directory have variable |
| length, depending on the lengths of the bitmap name and extra data. |
| |
| Structure of a bitmap directory entry: |
| |
| Byte 0 - 7: bitmap_table_offset |
| Offset into the image file at which the bitmap table |
| (described below) for the bitmap starts. Must be aligned to |
| a cluster boundary. |
| |
| 8 - 11: bitmap_table_size |
| Number of entries in the bitmap table of the bitmap. |
| |
| 12 - 15: flags |
| Bit |
| 0: in_use |
| The bitmap was not saved correctly and may be |
| inconsistent. Although the bitmap metadata is still |
| well-formed from a qcow2 perspective, the metadata |
| (such as the auto flag or bitmap size) or data |
| contents may be outdated. |
| |
| 1: auto |
| The bitmap must reflect all changes of the virtual |
| disk by any application that would write to this qcow2 |
| file (including writes, snapshot switching, etc.). The |
| type of this bitmap must be 'dirty tracking bitmap'. |
| |
| 2: extra_data_compatible |
| This flags is meaningful when the extra data is |
| unknown to the software (currently any extra data is |
| unknown to Qemu). |
| If it is set, the bitmap may be used as expected, extra |
| data must be left as is. |
| If it is not set, the bitmap must not be used, but |
| both it and its extra data be left as is. |
| |
| Bits 3 - 31 are reserved and must be 0. |
| |
| 16: type |
| This field describes the sort of the bitmap. |
| Values: |
| 1: Dirty tracking bitmap |
| |
| Values 0, 2 - 255 are reserved. |
| |
| 17: granularity_bits |
| Granularity bits. Valid values: 0 - 63. |
| |
| Note: Qemu currently supports only values 9 - 31. |
| |
| Granularity is calculated as |
| granularity = 1 << granularity_bits |
| |
| A bitmap's granularity is how many bytes of the image |
| accounts for one bit of the bitmap. |
| |
| 18 - 19: name_size |
| Size of the bitmap name. Must be non-zero. |
| |
| Note: Qemu currently doesn't support values greater than |
| 1023. |
| |
| 20 - 23: extra_data_size |
| Size of type-specific extra data. |
| |
| For now, as no extra data is defined, extra_data_size is |
| reserved and should be zero. If it is non-zero the |
| behavior is defined by extra_data_compatible flag. |
| |
| variable: extra_data |
| Extra data for the bitmap, occupying extra_data_size bytes. |
| Extra data must never contain references to clusters or in |
| some other way allocate additional clusters. |
| |
| variable: name |
| The name of the bitmap (not null terminated), occupying |
| name_size bytes. Must be unique among all bitmap names |
| within the bitmaps extension. |
| |
| variable: Padding to round up the bitmap directory entry size to the |
| next multiple of 8. All bytes of the padding must be zero. |
| |
| |
| === Bitmap table === |
| |
| Each bitmap is stored using a one-level structure (as opposed to two-level |
| structures like for refcounts and guest clusters mapping) for the mapping of |
| bitmap data to host clusters. This structure is called the bitmap table. |
| |
| Each bitmap table has a variable size (stored in the bitmap directory entry) |
| and may use multiple clusters, however, it must be contiguous in the image |
| file. |
| |
| Structure of a bitmap table entry: |
| |
| Bit 0: Reserved and must be zero if bits 9 - 55 are non-zero. |
| If bits 9 - 55 are zero: |
| 0: Cluster should be read as all zeros. |
| 1: Cluster should be read as all ones. |
| |
| 1 - 8: Reserved and must be zero. |
| |
| 9 - 55: Bits 9 - 55 of the host cluster offset. Must be aligned to |
| a cluster boundary. If the offset is 0, the cluster is |
| unallocated; in that case, bit 0 determines how this |
| cluster should be treated during reads. |
| |
| 56 - 63: Reserved and must be zero. |
| |
| |
| === Bitmap data === |
| |
| As noted above, bitmap data is stored in separate clusters, described by the |
| bitmap table. Given an offset (in bytes) into the bitmap data, the offset into |
| the image file can be obtained as follows: |
| |
| image_offset(bitmap_data_offset) = |
| bitmap_table[bitmap_data_offset / cluster_size] + |
| (bitmap_data_offset % cluster_size) |
| |
| This offset is not defined if bits 9 - 55 of bitmap table entry are zero (see |
| above). |
| |
| Given an offset byte_nr into the virtual disk and the bitmap's granularity, the |
| bit offset into the image file to the corresponding bit of the bitmap can be |
| calculated like this: |
| |
| bit_offset(byte_nr) = |
| image_offset(byte_nr / granularity / 8) * 8 + |
| (byte_nr / granularity) % 8 |
| |
| If the size of the bitmap data is not a multiple of the cluster size then the |
| last cluster of the bitmap data contains some unused tail bits. These bits must |
| be zero. |
| |
| |
| === Dirty tracking bitmaps === |
| |
| Bitmaps with 'type' field equal to one are dirty tracking bitmaps. |
| |
| When the virtual disk is in use dirty tracking bitmap may be 'enabled' or |
| 'disabled'. While the bitmap is 'enabled', all writes to the virtual disk |
| should be reflected in the bitmap. A set bit in the bitmap means that the |
| corresponding range of the virtual disk (see above) was written to while the |
| bitmap was 'enabled'. An unset bit means that this range was not written to. |
| |
| The software doesn't have to sync the bitmap in the image file with its |
| representation in RAM after each write or metadata change. Flag 'in_use' |
| should be set while the bitmap is not synced. |
| |
| In the image file the 'enabled' state is reflected by the 'auto' flag. If this |
| flag is set, the software must consider the bitmap as 'enabled' and start |
| tracking virtual disk changes to this bitmap from the first write to the |
| virtual disk. If this flag is not set then the bitmap is disabled. |
