.. _further-examples:

==================
 Further Examples
==================

.. currentmodule:: mock

.. testsetup::

    from datetime import date

    BackendProvider = Mock()
    sys.modules['mymodule'] = mymodule = Mock(name='mymodule')

    def grob(val):
        "First frob and then clear val"
        mymodule.frob(val)
        val.clear()

    mymodule.frob = lambda val: val
    mymodule.grob = grob
    mymodule.date = date

    class TestCase(unittest2.TestCase):
        def run(self):
            result = unittest2.TestResult()
            out = unittest2.TestCase.run(self, result)
            assert result.wasSuccessful()

    from mock import inPy3k


For comprehensive examples, see the unit tests included in the full source
distribution.

Here are some more examples for some slightly more advanced scenarios than in
the :ref:`getting started <getting-started>` guide.


Mocking chained calls
=====================

Mocking chained calls is actually straightforward with mock once you
understand the :attr:`~Mock.return_value` attribute. When a mock is called for
the first time, or you fetch its `return_value` before it has been called, a
new `Mock` is created.

This means that you can see how the object returned from a call to a mocked
object has been used by interrogating the `return_value` mock:

.. doctest::

    >>> mock = Mock()
    >>> mock().foo(a=2, b=3)
    <Mock name='mock().foo()' id='...'>
    >>> mock.return_value.foo.assert_called_with(a=2, b=3)

From here it is a simple step to configure and then make assertions about
chained calls. Of course another alternative is writing your code in a more
testable way in the first place...

So, suppose we have some code that looks a little bit like this:

.. doctest::

    >>> class Something(object):
    ...     def __init__(self):
    ...         self.backend = BackendProvider()
    ...     def method(self):
    ...         response = self.backend.get_endpoint('foobar').create_call('spam', 'eggs').start_call()
    ...         # more code

Assuming that `BackendProvider` is already well tested, how do we test
`method()`? Specifically, we want to test that the code section `# more
code` uses the response object in the correct way.

As this chain of calls is made from an instance attribute we can monkey patch
the `backend` attribute on a `Something` instance. In this particular case
we are only interested in the return value from the final call to
`start_call` so we don't have much configuration to do. Let's assume the
object it returns is 'file-like', so we'll ensure that our response object
uses the builtin `file` as its `spec`.

To do this we create a mock instance as our mock backend and create a mock
response object for it. To set the response as the return value for that final
`start_call` we could do this:

    `mock_backend.get_endpoint.return_value.create_call.return_value.start_call.return_value = mock_response`.

Here's how we might do it in a slightly nicer way. We start by creating our
initial mocks:

.. doctest::

    >>> something = Something()
    >>> mock_response = Mock(spec=file)
    >>> mock_backend = Mock()
    >>> get_endpoint = mock_backend.get_endpoint
    >>> create_call = get_endpoint.return_value.create_call
    >>> start_call = create_call.return_value.start_call
    >>> start_call.return_value = mock_response

With these we monkey patch the "mock backend" in place and can make the real
call:

.. doctest::

    >>> something.backend = mock_backend
    >>> something.method()

Using :attr:`~Mock.mock_calls` we can check the chained call with a single
assert. A chained call is several calls in one line of code, so there will be
several entries in `mock_calls`. We can use :meth:`call.call_list` to create
this list of calls for us:

.. doctest::

    >>> chained = call.get_endpoint('foobar').create_call('spam', 'eggs').start_call()
    >>> call_list = chained.call_list()
    >>> assert mock_backend.mock_calls == call_list


Partial mocking
===============

In some tests I wanted to mock out a call to `datetime.date.today()
<http://docs.python.org/library/datetime.html#datetime.date.today>`_ to return
a known date, but I didn't want to prevent the code under test from
creating new date objects. Unfortunately `datetime.date` is written in C, and
so I couldn't just monkey-patch out the static `date.today` method.

I found a simple way of doing this that involved effectively wrapping the date
class with a mock, but passing through calls to the constructor to the real
class (and returning real instances).

The :func:`patch decorator <patch>` is used here to
mock out the `date` class in the module under test. The :attr:`side_effect`
attribute on the mock date class is then set to a lambda function that returns
a real date. When the mock date class is called a real date will be
constructed and returned by `side_effect`.

.. doctest::

    >>> from datetime import date
    >>> with patch('mymodule.date') as mock_date:
    ...     mock_date.today.return_value = date(2010, 10, 8)
    ...     mock_date.side_effect = lambda *args, **kw: date(*args, **kw)
    ...
    ...     assert mymodule.date.today() == date(2010, 10, 8)
    ...     assert mymodule.date(2009, 6, 8) == date(2009, 6, 8)
    ...

Note that we don't patch `datetime.date` globally, we patch `date` in the
module that *uses* it. See :ref:`where to patch <where-to-patch>`.

When `date.today()` is called a known date is returned, but calls to the
`date(...)` constructor still return normal dates. Without this you can find
yourself having to calculate an expected result using exactly the same
algorithm as the code under test, which is a classic testing anti-pattern.

Calls to the date constructor are recorded in the `mock_date` attributes
(`call_count` and friends) which may also be useful for your tests.

An alternative way of dealing with mocking dates, or other builtin classes,
is discussed in `this blog entry
<http://williamjohnbert.com/2011/07/how-to-unit-testing-in-django-with-mocking-and-patching/>`_.


Mocking open
============

Using `open` as a context manager is a great way to ensure your file handles
are closed properly and is becoming common::

    with open('/some/path', 'w') as f:
        f.write('something')

The issue is that even if you mock out the call to `open` it is the
*returned object* that is used as a context manager (and has `__enter__` and
`__exit__` called).

Mocking context managers with a :class:`MagicMock` is common enough and fiddly
enough that a helper function is useful. Here `mock_open` creates and
configures a `MagicMock` that behaves as a file context manager. You can
optionally supply a `StringIO` object as the `data` argument for the actual
file handle:

.. testcode::

    from mock import inPy3k, MagicMock
    if inPy3k:
        file_spec = ['_CHUNK_SIZE', '__enter__', '__eq__', '__exit__',
            '__format__', '__ge__', '__gt__', '__hash__', '__iter__', '__le__',
            '__lt__', '__ne__', '__next__', '__repr__', '__str__',
            '_checkClosed', '_checkReadable', '_checkSeekable',
            '_checkWritable', 'buffer', 'close', 'closed', 'detach',
            'encoding', 'errors', 'fileno', 'flush', 'isatty',
            'line_buffering', 'mode', 'name',
            'newlines', 'peek', 'raw', 'read', 'read1', 'readable',
            'readinto', 'readline', 'readlines', 'seek', 'seekable', 'tell',
            'truncate', 'writable', 'write', 'writelines']
    else:
        file_spec = file

    def mock_open(mock=None, data=None):
        if mock is None:
            mock = MagicMock(spec=file_spec)

        handle = MagicMock(spec=file_spec)
        handle.write.return_value = None
        if data is None:
            handle.__enter__.return_value = handle
        else:
            handle.__enter__.return_value = data
        mock.return_value = handle
        return mock


.. doctest::

    >>> m = mock_open()
    >>> with patch('__main__.open', m, create=True):
    ...     with open('foo', 'w') as h:
    ...         h.write('some stuff')
    ...
    >>> m.mock_calls
    [call('foo', 'w'),
     call().__enter__(),
     call().write('some stuff'),
     call().__exit__(None, None, None)]
    >>> m.assert_called_once_with('foo', 'w')
    >>> handle = m()
    >>> handle.write.assert_called_once_with('some stuff')

And for reading files, using a `StringIO` to represent the actual file
handle:

.. doctest::

    >>> from StringIO import StringIO
    >>> m = mock_open(data=StringIO('foo bar baz'))
    >>> with patch('__main__.open', m, create=True):
    ...     with open('foo') as h:
    ...         result = h.read()
    ...
    >>> m.assert_called_once_with('foo')
    >>> assert result == 'foo bar baz'

Let's step through what's happening here in more detail.

To mock `open` we need a mock object that can be called, with the return
value able to act as a context manager. The easiest way of doing this is to
use :class:`MagicMock`, which is preconfigured to be able to act as a context
manger. As an added bonus we'll use the spec argument to ensure that the
mocked object can only be used in the same ways a real file could be used
(attempting to access a method or attribute not on the `file` will raise an
`AttributeError`):

.. doctest::

    >>> mock_open = Mock()
    >>> mock_open.return_value = MagicMock(spec=file)

In terms of configuring our mock this is all that needs to be done. In fact it
could be constructed with a one liner: `mock_open =
Mock(return_value=MagicMock(spec=file))`.

So what is the best way of patching the builtin `open` function? One way
would be to globally patch `__builtin__.open`. So long as you are sure that
none of the other code being called also accesses `open` this is perfectly
reasonable. It does make some people nervous however. By default we can't
patch the `open` name in the module where it is used, because `open`
doesn't exist as an attribute in that namespace. `patch` refuses to patch
attributes that don't exist because that is a great way of having tests that
pass but code that is horribly broken (your code can access attributes that
only exist during your tests!). `patch` *will* however create (and then
remove again) non-existent attributes if you tell it that you are really sure
you know what you're doing.

By passing `create=True` into `patch` we can just patch the `open`
function in the module under test instead of patching it globally:

.. doctest::

    >>> open_name = '%s.open' % __name__
    >>> with patch(open_name, create=True) as mock_open:
    ...     mock_open.return_value = MagicMock(spec=file)
    ...
    ...     with open('/some/path', 'w') as f:
    ...         f.write('something')
    ...
    <MagicMock name='open().__enter__().write()' id='...'>
    >>> file_handle = mock_open.return_value.__enter__.return_value
    >>> file_handle.write.assert_called_with('something')


Mocks without some attributes
=============================

Mock objects create attributes on demand. This allows them to pretend to be
objects of any type.

What mocks aren't so good at is pretending *not* to have attributes. You may
want a mock object to return `False` to a `hasattr` call, or raise an
`AttributeError` when an attribute is fetched. You can do this by providing
an object as a `spec` for a mock, but that isn't always convenient.

Below is a subclass of `Mock` that allows you to "block" attributes by
deleting them. Once deleted, accessing an attribute will raise an
`AttributeError`.

.. testcode::

    deleted = object()
    missing = object()

    class DeletingMock(Mock):
        def __delattr__(self, attr):
            if attr in self.__dict__:
                return super(DeletingMock, self).__delattr__(attr)
            obj = self._mock_children.get(attr, missing)
            if obj is deleted:
                raise AttributeError(attr)
            if obj is not missing:
                del self._mock_children[attr]
            self._mock_children[attr] = deleted

        def __getattr__(self, attr):
            result = super(DeletingMock, self).__getattr__(attr)
            if result is deleted:
                raise AttributeError(attr)
            return result


.. doctest::

    >>> mock = DeletingMock()
    >>> hasattr(mock, 'm')
    True
    >>> del mock.m
    >>> hasattr(mock, 'm')
    False
    >>> del mock.f
    >>> mock.f
    Traceback (most recent call last):
        ...
    AttributeError: f


Mocking a Generator Method
==========================

A Python generator is a function or method that uses the `yield statement
<http://docs.python.org/reference/simple_stmts.html#the-yield-statement>`_ to
return a series of values when iterated over [#]_.

A generator method / function is called to return the generator object. It is
the generator object that is then iterated over. The protocol method for
iteration is `__iter__
<http://docs.python.org/library/stdtypes.html#container.__iter__>`_, so we can
mock this using a `MagicMock`.

Here's an example class with an "iter" method implemented as a generator:

.. doctest::

    >>> class Foo(object):
    ...     def iter(self):
    ...         for i in [1, 2, 3]:
    ...             yield i
    ...
    >>> foo = Foo()
    >>> list(foo.iter())
    [1, 2, 3]


How would we mock this class, and in particular its "iter" method?

To configure the values returned from the iteration (implicit in the call to
`list`), we need to configure the object returned by the call to `foo.iter()`.

.. doctest::

    >>> mock_foo = MagicMock()
    >>> mock_foo.iter.return_value = iter([1, 2, 3])
    >>> list(mock_foo.iter())
    [1, 2, 3]

.. [#] There are also generator expressions and more `advanced uses
    <http://www.dabeaz.com/coroutines/index.html>`_ of generators, but we aren't
    concerned about them here. A very good introduction to generators and how
    powerful they are is: `Generator Tricks for Systems Programmers
    <http://www.dabeaz.com/generators/>`_.


Applying the same patch to every test method
============================================

If you want several patches in place for multiple test methods the obvious way
is to apply the patch decorators to every method. This can feel like unnecessary
repetition. For Python 2.6 or more recent you can use `patch` (in all its
various forms) as a class decorator. This applies the patches to all test
methods on the class. A test method is identified by methods whose names start
with `test`:

.. doctest::

    >>> @patch('mymodule.SomeClass')
    ... class MyTest(TestCase):
    ...
    ...     def test_one(self, MockSomeClass):
    ...         self.assertTrue(mymodule.SomeClass is MockSomeClass)
    ...
    ...     def test_two(self, MockSomeClass):
    ...         self.assertTrue(mymodule.SomeClass is MockSomeClass)
    ...
    ...     def not_a_test(self):
    ...         return 'something'
    ...
    >>> MyTest('test_one').test_one()
    >>> MyTest('test_two').test_two()
    >>> MyTest('test_two').not_a_test()
    'something'

An alternative way of managing patches is to use the :ref:`start-and-stop`.
These allow you to move the patching into your `setUp` and `tearDown` methods.

.. doctest::

    >>> class MyTest(TestCase):
    ...     def setUp(self):
    ...         self.patcher = patch('mymodule.foo')
    ...         self.mock_foo = self.patcher.start()
    ...
    ...     def test_foo(self):
    ...         self.assertTrue(mymodule.foo is self.mock_foo)
    ...
    ...     def tearDown(self):
    ...         self.patcher.stop()
    ...
    >>> MyTest('test_foo').run()

If you use this technique you must ensure that the patching is "undone" by
calling `stop`. This can be fiddlier than you might think, because if an
exception is raised in the setUp then tearDown is not called. `unittest2
<http://pypi.python.org/pypi/unittest2>`_ cleanup functions make this simpler:


.. doctest::

    >>> class MyTest(TestCase):
    ...     def setUp(self):
    ...         patcher = patch('mymodule.foo')
    ...         self.addCleanup(patcher.stop)
    ...         self.mock_foo = patcher.start()
    ...
    ...     def test_foo(self):
    ...         self.assertTrue(mymodule.foo is self.mock_foo)
    ...
    >>> MyTest('test_foo').run()


Mocking Unbound Methods
=======================

Whilst writing tests today I needed to patch an *unbound method* (patching the
method on the class rather than on the instance). I needed self to be passed
in as the first argument because I want to make asserts about which objects
were calling this particular method. The issue is that you can't patch with a
mock for this, because if you replace an unbound method with a mock it doesn't
become a bound method when fetched from the instance, and so it doesn't get
self passed in. The workaround is to patch the unbound method with a real
function instead. The :func:`patch` decorator makes it so simple to
patch out methods with a mock that having to create a real function becomes a
nuisance.

If you pass `mocksignature=True` to patch then it does the patching with a
*real* function object. This function object has the same signature as the one
it is replacing, but delegates to a mock under the hood. You still get your
mock auto-created in exactly the same way as before. What it means though, is
that if you use it to patch out an unbound method on a class the mocked
function will be turned into a bound method if it is fetched from an instance.
It will have `self` passed in as the first argument, which is exactly what I
wanted:

.. doctest::

    >>> class Foo(object):
    ...   def foo(self):
    ...     pass
    ...
    >>> with patch.object(Foo, 'foo', mocksignature=True) as mock_foo:
    ...   mock_foo.return_value = 'foo'
    ...   foo = Foo()
    ...   foo.foo()
    ...
    'foo'
    >>> mock_foo.assert_called_once_with(foo)

If we don't use `mocksignature=True` then the unbound method is patched out
with a Mock instance instead, and isn't called with `self`.


Mocking Properties
==================

A few people have asked about `mocking properties
<https://code.google.com/p/mock/issues/detail?id=38&can=1>`_, specifically
tracking when properties are fetched from objects or even having side effects
when properties are fetched.

You can already do this by subclassing :class:`Mock` and providing your own
property. Delegating to another mock is one way to record the property being
accessed whilst still able to control things like return values:

.. doctest::

    >>> mock_foo = Mock(return_value='fish')
    >>> class MyMock(Mock):
    ...     @property
    ...     def foo(self):
    ...         return mock_foo()
    ...
    >>> mock = MyMock()
    >>> mock.foo
    'fish'
    >>> mock_foo.assert_called_once_with()

This approach works fine if you can replace the whole object you're mocking. If
you *just* want to mock the property on another object here's an alternative
approach using the support for magic methods introduced in 0.7:

.. doctest::

    >>> class Foo(object):
    ...    @property
    ...    def fish(self):
    ...      return 'fish'
    ...
    >>> with patch.object(Foo, 'fish') as mock_fish:
    ...   mock_fish.__get__ = Mock(return_value='mocked fish')
    ...   foo = Foo()
    ...   print foo.fish
    ...
    mocked fish
    >>> mock_fish.__get__.assert_called_with(mock_fish, foo, Foo)

If you're using an earlier version of mock, a third approach is to subclass
:class:`Mock` and provide a `__get__ method
<http://docs.python.org/reference/datamodel.html#implementing-descriptors>`_
that delegates back to the mock:

.. doctest::

    >>> class PropertyMock(Mock):
    ...   def __get__(self, instance, owner):
    ...     return self()
    ...
    >>> prop_mock = PropertyMock()
    >>> with patch.object(Foo, 'fish', prop_mock):
    ...   foo = Foo()
    ...   prop_mock.return_value = 'mocked fish'
    ...   print foo.fish
    ...
    mocked fish
    >>> prop_mock.assert_called_with()

As you're patching on the class these techniques affect *all* instances of
`Foo`.


Checking multiple calls with mock
=================================

mock has a nice API for making assertions about how your mock objects are used.

.. doctest::

    >>> mock = Mock()
    >>> mock.foo_bar.return_value = None
    >>> mock.foo_bar('baz', spam='eggs')
    >>> mock.foo_bar.assert_called_with('baz', spam='eggs')

If your mock is only being called once you can use the
:meth:`assert_called_once_with` method that also asserts that the
:attr:`call_count` is one.

.. doctest::

    >>> mock.foo_bar.assert_called_once_with('baz', spam='eggs')
    >>> mock.foo_bar()
    >>> mock.foo_bar.assert_called_once_with('baz', spam='eggs')
    Traceback (most recent call last):
        ...
    AssertionError: Expected to be called once. Called 2 times.

Both `assert_called_with` and `assert_called_once_with` make assertions about
the *most recent* call. If your mock is going to be called several times, and
you want to make assertions about *all* those calls you can use
:attr:`~Mock.call_args_list`:

.. doctest::

    >>> mock = Mock(return_value=None)
    >>> mock(1, 2, 3)
    >>> mock(4, 5, 6)
    >>> mock()
    >>> mock.call_args_list
    [call(1, 2, 3), call(4, 5, 6), call()]

The :data:`call` helper makes it easy to make assertions about these calls. You
can build up a list of expected calls and compare it to `call_args_list`. This
looks remarkably similar to the repr of the `call_args_list`:

.. doctest::

    >>> expected = [call(1, 2, 3), call(4, 5, 6), call()]
    >>> mock.call_args_list == expected
    True


Coping with mutable arguments
=============================

Another situation is rare, but can bite you, is when your mock is called with
mutable arguments. `call_args` and `call_args_list` store *references* to the
arguments. If the arguments are mutated by the code under test then you can no
longer make assertions about what the values were when the mock was called.

Here's some example code that shows the problem. Imagine the following functions
defined in 'mymodule'::

    def frob(val):
        pass

    def grob(val):
        "First frob and then clear val"
        frob(val)
        val.clear()

When we try to test that `grob` calls `frob` with the correct argument look
what happens:

.. doctest::

    >>> with patch('mymodule.frob') as mock_frob:
    ...     val = set([6])
    ...     mymodule.grob(val)
    ...
    >>> val
    set([])
    >>> mock_frob.assert_called_with(set([6]))
    Traceback (most recent call last):
        ...
    AssertionError: Expected: ((set([6]),), {})
    Called with: ((set([]),), {})

One possibility would be for mock to copy the arguments you pass in. This
could then cause problems if you do assertions that rely on object identity
for equality.

Here's one solution that uses the :attr:`side_effect`
functionality. If you provide a `side_effect` function for a mock then
`side_effect` will be called with the same args as the mock. This gives us an
opportunity to copy the arguments and store them for later assertions. In this
example I'm using *another* mock to store the arguments so that I can use the
mock methods for doing the assertion. Again a helper function sets this up for
me.

.. doctest::

    >>> from copy import deepcopy
    >>> from mock import Mock, patch, DEFAULT
    >>> def copy_call_args(mock):
    ...     new_mock = Mock()
    ...     def side_effect(*args, **kwargs):
    ...         args = deepcopy(args)
    ...         kwargs = deepcopy(kwargs)
    ...         new_mock(*args, **kwargs)
    ...         return DEFAULT
    ...     mock.side_effect = side_effect
    ...     return new_mock
    ...
    >>> with patch('mymodule.frob') as mock_frob:
    ...     new_mock = copy_call_args(mock_frob)
    ...     val = set([6])
    ...     mymodule.grob(val)
    ...
    >>> new_mock.assert_called_with(set([6]))
    >>> new_mock.call_args
    call(set([6]))

`copy_call_args` is called with the mock that will be called. It returns a new
mock that we do the assertion on. The `side_effect` function makes a copy of
the args and calls our `new_mock` with the copy.

.. note::

    If your mock is only going to be used once there is an easier way of
    checking arguments at the point they are called. You can simply do the
    checking inside a `side_effect` function.

    .. doctest::

        >>> def side_effect(arg):
        ...     assert arg == set([6])
        ...
        >>> mock = Mock(side_effect=side_effect)
        >>> mock(set([6]))
        >>> mock(set())
        Traceback (most recent call last):
            ...
        AssertionError

An alternative approach is to create a subclass of `Mock` or `MagicMock` that
copies (using `copy.deepcopy
<http://docs.python.org/library/copy.html#copy.deepcopy>`_) the arguments.
Here's an example implementation:

.. doctest::

    >>> from copy import deepcopy
    >>> class CopyingMock(MagicMock):
    ...     def __call__(self, *args, **kwargs):
    ...         args = deepcopy(args)
    ...         kwargs = deepcopy(kwargs)
    ...         return super(CopyingMock, self).__call__(*args, **kwargs)
    ...
    >>> c = CopyingMock(return_value=None)
    >>> arg = set()
    >>> c(arg)
    >>> arg.add(1)
    >>> c.assert_called_with(set())
    >>> c.assert_called_with(arg)
    Traceback (most recent call last):
        ...
    AssertionError: Expected call: mock(set([1]))
    Actual call: mock(set([]))
    >>> c.foo
    <CopyingMock name='mock.foo' id='...'>

When you subclass `Mock` or `MagicMock` all dynamically created attributes,
and the `return_value` will use your subclass automatically. That means all
children of a `CopyingMock` will also have the type `CopyingMock`.


Multiple calls with different effects
=====================================

Handling code that needs to behave differently on subsequent calls during the
test can be tricky. For example you may have a function that needs to raise
an exception the first time it is called but returns a response on the second
call (testing retry behaviour).

One approach is to use a :attr:`side_effect` function that replaces itself. The
first time it is called the `side_effect` sets a new `side_effect` that will
be used for the second call. It then raises an exception:

.. doctest::

    >>> def side_effect(*args):
    ...   def second_call(*args):
    ...     return 'response'
    ...   mock.side_effect = second_call
    ...   raise Exception('boom')
    ...
    >>> mock = Mock(side_effect=side_effect)
    >>> mock('first')
    Traceback (most recent call last):
        ...
    Exception: boom
    >>> mock('second')
    'response'
    >>> mock.assert_called_with('second')

Another perfectly valid way would be to pop return values from a list. If the
return value is an exception, raise it instead of returning it:

.. doctest::

    >>> returns = [Exception('boom'), 'response']
    >>> def side_effect(*args):
    ...   result = returns.pop(0)
    ...   if isinstance(result, Exception):
    ...     raise result
    ...   return result
    ...
    >>> mock = Mock(side_effect=side_effect)
    >>> mock('first')
    Traceback (most recent call last):
        ...
    Exception: boom
    >>> mock('second')
    'response'
    >>> mock.assert_called_with('second')

Which approach you prefer is a matter of taste. The first approach is actually
a line shorter but maybe the second approach is more readable.


Nesting Patches
===============

Using patch as a context manager is nice, but if you do multiple patches you
can end up with nested with statements indenting further and further to the
right:

.. doctest::

    >>> class MyTest(TestCase):
    ...
    ...     def test_foo(self):
    ...         with patch('mymodule.Foo') as mock_foo:
    ...             with patch('mymodule.Bar') as mock_bar:
    ...                 with patch('mymodule.Spam') as mock_spam:
    ...                     assert mymodule.Foo is mock_foo
    ...                     assert mymodule.Bar is mock_bar
    ...                     assert mymodule.Spam is mock_spam
    ...
    >>> original = mymodule.Foo
    >>> MyTest('test_foo').test_foo()
    >>> assert mymodule.Foo is original

With unittest2_ `cleanup` functions and the :ref:`start-and-stop` we can
achieve the same effect without the nested indentation. A simple helper
method, `create_patch`, puts the patch in place and returns the created mock
for us:

.. doctest::

    >>> class MyTest(TestCase):
    ...
    ...     def create_patch(self, name):
    ...         patcher = patch(name)
    ...         thing = patcher.start()
    ...         self.addCleanup(patcher.stop)
    ...         return thing
    ...
    ...     def test_foo(self):
    ...         mock_foo = self.create_patch('mymodule.Foo')
    ...         mock_bar = self.create_patch('mymodule.Bar')
    ...         mock_spam = self.create_patch('mymodule.Spam')
    ...
    ...         assert mymodule.Foo is mock_foo
    ...         assert mymodule.Bar is mock_bar
    ...         assert mymodule.Spam is mock_spam
    ...
    >>> original = mymodule.Foo
    >>> MyTest('test_foo').run()
    >>> assert mymodule.Foo is original


Mocking a dictionary with MagicMock
===================================

You may want to mock a dictionary, or other container object, recording all
access to it whilst having it still behave like a dictionary.

We can do this with :class:`MagicMock`, which will behave like a dictionary,
and using :data:`~Mock.side_effect` to delegate dictionary access to a real
underlying dictionary that is under our control.

When the `__getitem__` and `__setitem__` methods of our `MagicMock` are called
(normal dictionary access) then `side_effect` is called with the key (and in
the case of `__setitem__` the value too). We can also control what is returned.

After the `MagicMock` has been used we can use attributes like
:data:`~Mock.call_args_list` to assert about how the dictionary was used:

.. doctest::

    >>> my_dict = {'a': 1, 'b': 2, 'c': 3}
    >>> def getitem(name):
    ...      return my_dict[name]
    ...
    >>> def setitem(name, val):
    ...     my_dict[name] = val
    ...
    >>> mock = MagicMock()
    >>> mock.__getitem__.side_effect = getitem
    >>> mock.__setitem__.side_effect = setitem

.. note::

    An alternative to using `MagicMock` is to use `Mock` and *only* provide
    the magic methods you specifically want:

    .. doctest::

        >>> mock = Mock()
        >>> mock.__setitem__ = Mock(side_effect=getitem)
        >>> mock.__getitem__ = Mock(side_effect=setitem)

    A *third* option is to use `MagicMock` but passing in `dict` as the `spec`
    (or `spec_set`) argument so that the `MagicMock` created only has
    dictionary magic methods available:

    .. doctest::

        >>> mock = MagicMock(spec_set=dict)
        >>> mock.__getitem__.side_effect = getitem
        >>> mock.__setitem__.side_effect = setitem

With these side effect functions in place, the `mock` will behave like a normal
dictionary but recording the access. It even raises a `KeyError` if you try
to access a key that doesn't exist.

.. doctest::

    >>> mock['a']
    1
    >>> mock['c']
    3
    >>> mock['d']
    Traceback (most recent call last):
        ...
    KeyError: 'd'
    >>> mock['b'] = 'fish'
    >>> mock['d'] = 'eggs'
    >>> mock['b']
    'fish'
    >>> mock['d']
    'eggs'

After it has been used you can make assertions about the access using the normal
mock methods and attributes:

.. doctest::

    >>> mock.__getitem__.call_args_list
    [call('a'), call('c'), call('d'), call('b'), call('d')]
    >>> mock.__setitem__.call_args_list
    [call('b', 'fish'), call('d', 'eggs')]
    >>> my_dict
    {'a': 1, 'c': 3, 'b': 'fish', 'd': 'eggs'}


Mock subclasses and their attributes
====================================

There are various reasons why you might want to subclass `Mock`. One reason
might be to add helper methods. Here's a silly example:

.. doctest::

    >>> class MyMock(MagicMock):
    ...     def has_been_called(self):
    ...         return self.called
    ...
    >>> mymock = MyMock(return_value=None)
    >>> mymock
    <MyMock id='...'>
    >>> mymock.has_been_called()
    False
    >>> mymock()
    >>> mymock.has_been_called()
    True

The standard behaviour for `Mock` instances is that attributes and the return
value mocks are of the same type as the mock they are accessed on. This ensures
that `Mock` attributes are `Mocks` and `MagicMock` attributes are `MagicMocks`
[#]_. So if you're subclassing to add helper methods then they'll also be
available on the attributes and return value mock of instances of your
subclass.

.. doctest::

    >>> mymock.foo
    <MyMock name='mock.foo' id='...'>
    >>> mymock.foo.has_been_called()
    False
    >>> mymock.foo()
    <MyMock name='mock.foo()' id='...'>
    >>> mymock.foo.has_been_called()
    True

Sometimes this is inconvenient. For example, `one user
<https://code.google.com/p/mock/issues/detail?id=105>`_ is subclassing mock to
created a `Twisted adaptor
<http://twistedmatrix.com/documents/11.0.0/api/twisted.python.components.html>`_.
Having this applied to attributes too actually causes errors.

`Mock` (in all its flavours) uses a method called `_get_child_mock` to create
these "sub-mocks" for attributes and return values. You can prevent your
subclass being used for attributes by overriding this method. The signature is
that it takes arbitrary keyword arguments (`**kwargs`) which are then passed
onto the mock constructor:

.. doctest::

    >>> class Subclass(MagicMock):
    ...     def _get_child_mock(self, **kwargs):
    ...         return MagicMock(**kwargs)
    ...
    >>> mymock = Subclass()
    >>> mymock.foo
    <MagicMock name='mock.foo' id='...'>
    >>> assert isinstance(mymock, Subclass)
    >>> assert not isinstance(mymock.foo, Subclass)
    >>> assert not isinstance(mymock(), Subclass)

.. [#] An exception to this rule are the non-callable mocks. Attributes use the
    callable variant because otherwise non-callable mocks couldn't have callable
    methods.


Mocking imports with patch.dict
===============================

One situation where mocking can be hard is where you have a local import inside
a function. These are harder to mock because they aren't using an object from
the module namespace that we can patch out.

Generally local imports are to be avoided. They are sometimes done to prevent
circular dependencies, for which there is *usually* a much better way to solve
the problem (refactor the code) or to prevent "up front costs" by delaying the
import. This can also be solved in better ways than an unconditional local
import (store the module as a class or module attribute and only do the import
on first use).

That aside there is a way to use `mock` to affect the results of an import.
Importing fetches an *object* from the `sys.modules` dictionary. Note that it
fetches an *object*, which need not be a module. Importing a module for the
first time results in a module object being put in `sys.modules`, so usually
when you import something you get a module back. This need not be the case
however.

This means you can use :func:`patch.dict` to *temporarily* put a mock in place
in `sys.modules`. Any imports whilst this patch is active will fetch the mock.
When the patch is complete (the decorated function exits, the with statement
body is complete or `patcher.stop()` is called) then whatever was there
previously will be restored safely.

Here's an example that mocks out the 'fooble' module.

.. doctest::

    >>> mock = Mock()
    >>> with patch.dict('sys.modules', {'fooble': mock}):
    ...    import fooble
    ...    fooble.blob()
    ...
    <Mock name='mock.blob()' id='...'>
    >>> assert 'fooble' not in sys.modules
    >>> mock.blob.assert_called_once_with()

As you can see the `import fooble` succeeds, but on exit there is no 'fooble'
left in `sys.modules`.

This also works for the `from module import name` form:

.. doctest::

    >>> mock = Mock()
    >>> with patch.dict('sys.modules', {'fooble': mock}):
    ...    from fooble import blob
    ...    blob.blip()
    ...
    <Mock name='mock.blob.blip()' id='...'>
    >>> mock.blob.blip.assert_called_once_with()

With slightly more work you can also mock package imports:

.. doctest::

    >>> mock = Mock()
    >>> modules = {'package': mock, 'package.module': mock.module}
    >>> with patch.dict('sys.modules', modules):
    ...    from package.module import fooble
    ...    fooble()
    ...
    <Mock name='mock.module.fooble()' id='...'>
    >>> mock.module.fooble.assert_called_once_with()

Unfortunately it seems that using `patch.dict` as a test *decorator* on
`sys.modules` interferes with the way `nosetests
<http://somethingaboutorange.com/mrl/projects/nose/>`_ collects tests.
`nosetests` does some manipulation of `sys.modules` (along with `sys.path`
manipulation) and using `patch.dict` with `sys.modules` can cause it to not
find tests. Using `patch.dict` as a context manager, or using the
:ref:`start-and-stop`, work around this by taking a reference to `sys.modules`
inside the test rather than at import time. (Using `patch.dict` as a decorator
takes a *reference* to `sys.modules` at import time, it doesn't do the
patching until the test is executed though.)


Tracking order of calls and less verbose call assertions
========================================================

The :class:`Mock` class allows you to track the *order* of method calls on
your mock objects through the :attr:`~Mock.method_calls` attribute. This
doesn't allow you to track the order of calls between separate mock objects,
however we can use :attr:`~Mock.mock_calls` to achieve the same effect.

Because mocks track calls to child mocks in `mock_calls`, and accessing an
arbitrary attribute of a mock creates a child mock, we can create our separate
mocks from a parent one. Calls to those child mock will then all be recorded,
in order, in the `mock_calls` of the parent:

.. doctest::

    >>> manager = Mock()
    >>> mock_foo = manager.foo
    >>> mock_bar = manager.bar

    >>> mock_foo.something()
    <Mock name='mock.foo.something()' id='...'>
    >>> mock_bar.other.thing()
    <Mock name='mock.bar.other.thing()' id='...'>

    >>> manager.mock_calls
    [call.foo.something(), call.bar.other.thing()]

We can then assert about the calls, including the order, by comparing with
the `mock_calls` attribute on the manager mock:

.. doctest::

    >>> expected_calls = [call.foo.something(), call.bar.other.thing()]
    >>> manager.mock_calls == expected_calls
    True

If `patch` is creating, and putting in place, your mocks then you can attach
them to a manager mock using the :meth:`~Mock.attach_mock` method. After
attaching calls will be recorded in `mock_calls` of the manager.

.. doctest::

    >>> manager = MagicMock()
    >>> with patch('mymodule.Class1') as MockClass1:
    ...     with patch('mymodule.Class2') as MockClass2:
    ...         manager.attach_mock(MockClass1, 'MockClass1')
    ...         manager.attach_mock(MockClass2, 'MockClass2')
    ...         MockClass1().foo()
    ...         MockClass2().bar()
    ...
    <MagicMock name='mock.MockClass1().foo()' id='...'>
    <MagicMock name='mock.MockClass2().bar()' id='...'>
    >>> manager.mock_calls
    [call.MockClass1(),
     call.MockClass1().foo(),
     call.MockClass2(),
     call.MockClass2().bar()]

If many calls have been made, but you're only interested in a particular
sequence of them then an alternative is to use the
:meth:`~Mock.assert_has_calls` method. This takes a list of calls (constructed
with the :data:`call` object). If that sequence of calls are in
:attr:`~Mock.mock_calls` then the assert succeeds.

.. doctest::

    >>> m = MagicMock()
    >>> m().foo().bar().baz()
    <MagicMock name='mock().foo().bar().baz()' id='...'>
    >>> m.one().two().three()
    <MagicMock name='mock.one().two().three()' id='...'>
    >>> calls = call.one().two().three().call_list()
    >>> m.assert_has_calls(calls)

Even though the chained call `m.one().two().three()` aren't the only calls that
have been made to the mock, the assert still succeeds.

Sometimes a mock may have several calls made to it, and you are only interested
in asserting about *some* of those calls. You may not even care about the
order. In this case you can pass `any_order=True` to `assert_has_calls`:

.. doctest::

    >>> m = MagicMock()
    >>> m(1), m.two(2, 3), m.seven(7), m.fifty('50')
    (...)
    >>> calls = [call.fifty('50'), call(1), call.seven(7)]
    >>> m.assert_has_calls(calls, any_order=True)


More complex argument matching
==============================

Using the same basic concept as `ANY` we can implement matchers to do more
complex assertions on objects used as arguments to mocks.

Suppose we expect some object to be passed to a mock that by default
compares equal based on object identity (which is the Python default for user
defined classes). To use :meth:`~Mock.assert_called_with` we would need to pass
in the exact same object. If we are only interested in some of the attributes
of this object then we can create a matcher that will check these attributes
for us.

You can see in this example how a 'standard' call to `assert_called_with` isn't
sufficient:

.. doctest::

    >>> class Foo(object):
    ...     def __init__(self, a, b):
    ...         self.a, self.b = a, b
    ...
    >>> mock = Mock(return_value=None)
    >>> mock(Foo(1, 2))
    >>> mock.assert_called_with(Foo(1, 2))
    Traceback (most recent call last):
        ...
    AssertionError: Expected: call(<__main__.Foo object at 0x...>)
    Actual call: call(<__main__.Foo object at 0x...>)

A comparison function for our `Foo` class might look something like this:

.. doctest::

    >>> def compare(self, other):
    ...     if not type(self) == type(other):
    ...         return False
    ...     if self.a != other.a:
    ...         return False
    ...     if self.b != other.b:
    ...         return False
    ...     return True
    ...

And a matcher object that can use comparison functions like this for its
equality operation would look something like this:

.. doctest::

    >>> class Matcher(object):
    ...     def __init__(self, compare, some_obj):
    ...         self.compare = compare
    ...         self.some_obj = some_obj
    ...     def __eq__(self, other):
    ...         return self.compare(self.some_obj, other)
    ...

Putting all this together:

.. doctest::

    >>> match_foo = Matcher(compare, Foo(1, 2))
    >>> mock.assert_called_with(match_foo)

The `Matcher` is instantiated with our compare function and the `Foo` object
we want to compare against. In `assert_called_with` the `Matcher` equality
method will be called, which compares the object the mock was called with
against the one we created our matcher with. If they match then
`assert_called_with` passes, and if they don't an `AssertionError` is raised:

.. doctest::

    >>> match_wrong = Matcher(compare, Foo(3, 4))
    >>> mock.assert_called_with(match_wrong)
    Traceback (most recent call last):
        ...
    AssertionError: Expected: ((<Matcher object at 0x...>,), {})
    Called with: ((<Foo object at 0x...>,), {})

With a bit of tweaking you could have the comparison function raise the
`AssertionError` directly and provide a more useful failure message.

As of version 1.5, the Python testing library `PyHamcrest
<http://pypi.python.org/pypi/PyHamcrest>`_ provides similar functionality,
that may be useful here, in the form of its equality matcher
(`hamcrest.library.integration.match_equality
<http://packages.python.org/PyHamcrest/integration.html#hamcrest.library.integration.match_equality>`_).


Less verbose configuration of mock objects
==========================================

This recipe, for easier configuration of mock objects, is now part of `Mock`.
See the :meth:`~Mock.configure_mock` method.


Matching any argument in assertions
===================================

This example is now built in to mock. See :data:`ANY`.