registry/vulkan/chapters/geometry.txt - third_party/platform/external/gfxstream-protocols - Git at Google

 // Copyright 2015-2021 The Khronos Group, Inc.
 //
 // SPDX-License-Identifier: CC-BY-4.0

 [[geometry]]
 = Geometry Shading

 The geometry shader operates on a group of vertices and their associated
 data assembled from a single input primitive, and emits zero or more output
 primitives and the group of vertices and their associated data required for
 each output primitive.
 Geometry shading is enabled when a geometry shader is included in the
 pipeline.


 [[geometry-input]]
 == Geometry Shader Input Primitives

 Each geometry shader invocation has access to all vertices in the primitive
 (and their associated data), which are presented to the shader as an array
 of inputs.

 The input primitive type expected by the geometry shader is specified with
 an code:OpExecutionMode instruction in the geometry shader, and must: match
 the incoming primitive type specified by either the pipeline's
 <<drawing-primitive-topologies, primitive topology>> if tessellation is
 inactive, or the <<tessellation, tessellation mode>> if tessellation is
 active, as follows:

   * An input primitive type of code:InputPoints must: only be used with a
     pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST, or with a
     tessellation shader that specifies code:PointMode.
     The input arrays always contain one element, as described by the
     <<drawing-point-lists, point list topology>> or
     <<tessellation-point-mode, tessellation in point mode>>.
   * An input primitive type of code:InputLines must: only be used with a
     pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST or
     ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP, or with a tessellation shader
     specifying code:IsoLines that does not specify code:PointMode.
     The input arrays always contain two elements, as described by the
     <<drawing-line-lists, line list topology>> or <<drawing-line-strips,
     line strip topology>>, or by <<tessellation-isoline-tessellation,
     isoline tessellation>>.
   * An input primitive type of code:InputLinesAdjacency must: only be used
     when tessellation is inactive, with a pipeline topology of
     ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY or
     ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY.
     The input arrays always contain four elements, as described by the
     <<drawing-line-lists-with-adjacency, line list with adjacency topology>>
     or <<drawing-line-strips-with-adjacency, line strip with adjacency
     topology>>.
   * An input primitive type of code:Triangles must: only be used with a
     pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
     ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP, or
     ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN; or with a tessellation shader
     specifying code:Quads or code:Triangles that does not specify
     code:PointMode.
     The input arrays always contain three elements, as described by the
     <<drawing-triangle-lists, triangle list topology>>,
     <<drawing-triangle-strips, triangle strip topology>>, or
     <<drawing-triangle-fans, triangle fan topology>>, or by
     <<tessellation-triangle-tessellation, triangle>> or
     <<tessellation-quad-tessellation, quad tessellation>>.
     Vertices may: be in a different absolute order to that specified by the
     topology, but must: adhere to the specified winding order.
   * An input primitive type of code:InputTrianglesAdjacency must: only be
     used when tessellation is inactive, with a pipeline topology of
     ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY or
     ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY.
     The input arrays always contain six elements, as described by the
     <<drawing-triangle-lists-with-adjacency, triangle list with adjacency
     topology>> or <<drawing-triangle-strips-with-adjacency, triangle strip
     with adjacency topology>>.
     Vertices may: be in a different absolute order to that specified by the
     topology, but must: adhere to the specified winding order, and the
     vertices making up the main primitive must: still occur at the first,
     third, and fifth index.

 [[geometry-output]]
 == Geometry Shader Output Primitives

 A geometry shader generates primitives in one of three output modes: points,
 line strips, or triangle strips.
 The primitive mode is specified in the shader using an code:OpExecutionMode
 instruction with the code:OutputPoints, code:OutputLineStrip or
 code:OutputTriangleStrip modes, respectively.
 Each geometry shader must: include exactly one output primitive mode.

 The vertices output by the geometry shader are assembled into points, lines,
 or triangles based on the output primitive type and the resulting primitives
 are then further processed as described in <<primsrast>>.
 If the number of vertices emitted by the geometry shader is not sufficient
 to produce a single primitive, vertices corresponding to incomplete
 primitives are not processed by subsequent pipeline stages.
 The number of vertices output by the geometry shader is limited to a maximum
 count specified in the shader.

 The maximum output vertex count is specified in the shader using an
 code:OpExecutionMode instruction with the mode set to code:OutputVertices
 and the maximum number of vertices that will be produced by the geometry
 shader specified as a literal.
 Each geometry shader must: specify a maximum output vertex count.


 [[geometry-invocations]]
 == Multiple Invocations of Geometry Shaders

 Geometry shaders can: be invoked more than one time for each input
 primitive.
 This is known as _geometry shader instancing_ and is requested by including
 an code:OpExecutionMode instruction with code:mode specified as
 code:Invocations and the number of invocations specified as an integer
 literal.

 In this mode, the geometry shader will execute at least [eq]#n# times for
 each input primitive, where [eq]#n# is the number of invocations specified
 in the code:OpExecutionMode instruction.
 The instance number is available to each invocation as a built-in input
 using code:InvocationId.


 [[geometry-ordering]]
 == Geometry Shader Primitive Ordering

 Limited guarantees are provided for the relative ordering of primitives
 produced by a geometry shader, as they pertain to <<drawing-primitive-order,
 primitive order>>.

   * For instanced geometry shaders, the output primitives generated from
     each input primitive are passed to subsequent pipeline stages using the
     invocation number to order the primitives, from least to greatest.
   * All output primitives generated from a given input primitive are passed
     to subsequent pipeline stages before any output primitives generated
     from subsequent input primitives.


 ifdef::VK_NV_geometry_shader_passthrough[]
 [[geometry-passthrough]]
 == Geometry Shader Passthrough

 A geometry shader that uses the code:PassthroughNV decoration on a variable
 in its input interface is considered a _passthrough geometry shader_.
 Output primitives in a passthrough geometry shader must: have the same
 topology as the input primitive and are not produced by emitting vertices.
 The vertices of the output primitive have two different types of attributes,
 per-vertex and per-primitive.
 Geometry shader input variables with code:PassthroughNV decoration are
 considered to produce per-vertex outputs, where values for each output
 vertex are copied from the corresponding input vertex.
 Any built-in or user-defined geometry shader outputs are considered
 per-primitive in a passthrough geometry shader, where a single output value
 is copied to all output vertices.

 The remainder of this section details the usage of the code:PassthroughNV
 decoration and modifications to the interface matching rules when using
 passthrough geometry shaders.


 [[geometry-passthrough-passthrough]]
 === code:PassthroughNV Decoration

 Decorating a geometry shader input variable with the code:PassthroughNV
 decoration indicates that values of this input are copied through to the
 corresponding vertex of the output primitive.
 Input variables and block members which do not have the code:PassthroughNV
 decoration are consumed by the geometry shader without being passed through
 to subsequent stages.

 The code:PassthroughNV decoration must: only be used within a geometry
 shader.

 Any variable decorated with code:PassthroughNV must: be declared using the
 code:Input storage class.

 The code:PassthroughNV decoration must: not be used with any of:

   * an input primitive type other than code:InputPoints, code:InputLines, or
     code:Triangles, as specified by the mode for code:OpExecutionMode.
   * an invocation count other than one, as specified by the code:Invocations
     mode for code:OpExecutionMode.
   * an code:OpEntryPoint which statically uses the code:OpEmitVertex or
     code:OpEndPrimitive instructions.
   * a variable decorated with the code:InvocationId built-in decoration.
   * a variable decorated with the code:PrimitiveId built-in decoration that
     is declared using the code:Input storage class.


 [[geometry-passthrough-interface]]
 === Passthrough Interface Matching

 When a passthrough geometry shader is in use, the
 <<interfaces-iointerfaces-matching,Interface Matching>> rules involving the
 geometry shader input and output interfaces operate as described in this
 section.

 For the purposes of matching passthrough geometry shader inputs with outputs
 of the previous pipeline stages, the code:PassthroughNV decoration is
 ignored.

 For the purposes of matching the outputs of the geometry shader with
 subsequent pipeline stages, each input variable with the code:PassthroughNV
 decoration is considered to add an equivalent output variable with the same
 type, decoration (other than code:PassthroughNV), number, and declaration
 order on the output interface.
 The output variable declaration corresponding to an input variable decorated
 with code:PassthroughNV will be identical to the input declaration, except
 that the outermost array dimension of such variables is removed.
 The output block declaration corresponding to an input block decorated with
 code:PassthroughNV or having members decorated with code:PassthroughNV will
 be identical to the input declaration, except that the outermost array
 dimension of such declaration is removed.

 If an input block is decorated with code:PassthroughNV, the equivalent
 output block contains all the members of the input block.
 Otherwise, the equivalent output block contains only those input block
 members decorated with code:PassthroughNV.
 All members of the corresponding output block are assigned code:Location and
 code:Component decorations identical to those assigned to the corresponding
 input block members.

 Output variables and blocks generated from inputs decorated with
 code:PassthroughNV will only exist for the purposes of interface matching;
 these declarations are not available to geometry shader code or listed in
 the module interface.

 For the purposes of component counting, passthrough geometry shaders count
 all statically used input variable components declared with the
 code:PassthroughNV decoration as output components as well, since their
 values will be copied to the output primitive produced by the geometry
 shader.

 endif::VK_NV_geometry_shader_passthrough[]
	// Copyright 2015-2021 The Khronos Group, Inc.
	//
	// SPDX-License-Identifier: CC-BY-4.0

	[[geometry]]
	= Geometry Shading

	The geometry shader operates on a group of vertices and their associated
	data assembled from a single input primitive, and emits zero or more output
	primitives and the group of vertices and their associated data required for
	each output primitive.
	Geometry shading is enabled when a geometry shader is included in the
	pipeline.


	[[geometry-input]]
	== Geometry Shader Input Primitives

	Each geometry shader invocation has access to all vertices in the primitive
	(and their associated data), which are presented to the shader as an array
	of inputs.

	The input primitive type expected by the geometry shader is specified with
	an code:OpExecutionMode instruction in the geometry shader, and must: match
	the incoming primitive type specified by either the pipeline's
	<<drawing-primitive-topologies, primitive topology>> if tessellation is
	inactive, or the <<tessellation, tessellation mode>> if tessellation is
	active, as follows:

	* An input primitive type of code:InputPoints must: only be used with a
	pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST, or with a
	tessellation shader that specifies code:PointMode.
	The input arrays always contain one element, as described by the
	<<drawing-point-lists, point list topology>> or
	<<tessellation-point-mode, tessellation in point mode>>.
	* An input primitive type of code:InputLines must: only be used with a
	pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST or
	ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP, or with a tessellation shader
	specifying code:IsoLines that does not specify code:PointMode.
	The input arrays always contain two elements, as described by the
	<<drawing-line-lists, line list topology>> or <<drawing-line-strips,
	line strip topology>>, or by <<tessellation-isoline-tessellation,
	isoline tessellation>>.
	* An input primitive type of code:InputLinesAdjacency must: only be used
	when tessellation is inactive, with a pipeline topology of
	ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY or
	ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY.
	The input arrays always contain four elements, as described by the
	<<drawing-line-lists-with-adjacency, line list with adjacency topology>>
	or <<drawing-line-strips-with-adjacency, line strip with adjacency
	topology>>.
	* An input primitive type of code:Triangles must: only be used with a
	pipeline topology of ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
	ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP, or
	ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN; or with a tessellation shader
	specifying code:Quads or code:Triangles that does not specify
	code:PointMode.
	The input arrays always contain three elements, as described by the
	<<drawing-triangle-lists, triangle list topology>>,
	<<drawing-triangle-strips, triangle strip topology>>, or
	<<drawing-triangle-fans, triangle fan topology>>, or by
	<<tessellation-triangle-tessellation, triangle>> or
	<<tessellation-quad-tessellation, quad tessellation>>.
	Vertices may: be in a different absolute order to that specified by the
	topology, but must: adhere to the specified winding order.
	* An input primitive type of code:InputTrianglesAdjacency must: only be
	used when tessellation is inactive, with a pipeline topology of
	ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY or
	ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY.
	The input arrays always contain six elements, as described by the
	<<drawing-triangle-lists-with-adjacency, triangle list with adjacency
	topology>> or <<drawing-triangle-strips-with-adjacency, triangle strip
	with adjacency topology>>.
	Vertices may: be in a different absolute order to that specified by the
	topology, but must: adhere to the specified winding order, and the
	vertices making up the main primitive must: still occur at the first,
	third, and fifth index.

	[[geometry-output]]
	== Geometry Shader Output Primitives

	A geometry shader generates primitives in one of three output modes: points,
	line strips, or triangle strips.
	The primitive mode is specified in the shader using an code:OpExecutionMode
	instruction with the code:OutputPoints, code:OutputLineStrip or
	code:OutputTriangleStrip modes, respectively.
	Each geometry shader must: include exactly one output primitive mode.

	The vertices output by the geometry shader are assembled into points, lines,
	or triangles based on the output primitive type and the resulting primitives
	are then further processed as described in <<primsrast>>.
	If the number of vertices emitted by the geometry shader is not sufficient
	to produce a single primitive, vertices corresponding to incomplete
	primitives are not processed by subsequent pipeline stages.
	The number of vertices output by the geometry shader is limited to a maximum
	count specified in the shader.

	The maximum output vertex count is specified in the shader using an
	code:OpExecutionMode instruction with the mode set to code:OutputVertices
	and the maximum number of vertices that will be produced by the geometry
	shader specified as a literal.
	Each geometry shader must: specify a maximum output vertex count.


	[[geometry-invocations]]
	== Multiple Invocations of Geometry Shaders

	Geometry shaders can: be invoked more than one time for each input
	primitive.
	This is known as _geometry shader instancing_ and is requested by including
	an code:OpExecutionMode instruction with code:mode specified as
	code:Invocations and the number of invocations specified as an integer
	literal.

	In this mode, the geometry shader will execute at least [eq]#n# times for
	each input primitive, where [eq]#n# is the number of invocations specified
	in the code:OpExecutionMode instruction.
	The instance number is available to each invocation as a built-in input
	using code:InvocationId.


	[[geometry-ordering]]
	== Geometry Shader Primitive Ordering

	Limited guarantees are provided for the relative ordering of primitives
	produced by a geometry shader, as they pertain to <<drawing-primitive-order,
	primitive order>>.

	* For instanced geometry shaders, the output primitives generated from
	each input primitive are passed to subsequent pipeline stages using the
	invocation number to order the primitives, from least to greatest.
	* All output primitives generated from a given input primitive are passed
	to subsequent pipeline stages before any output primitives generated
	from subsequent input primitives.


	ifdef::VK_NV_geometry_shader_passthrough[]
	[[geometry-passthrough]]
	== Geometry Shader Passthrough

	A geometry shader that uses the code:PassthroughNV decoration on a variable
	in its input interface is considered a _passthrough geometry shader_.
	Output primitives in a passthrough geometry shader must: have the same
	topology as the input primitive and are not produced by emitting vertices.
	The vertices of the output primitive have two different types of attributes,
	per-vertex and per-primitive.
	Geometry shader input variables with code:PassthroughNV decoration are
	considered to produce per-vertex outputs, where values for each output
	vertex are copied from the corresponding input vertex.
	Any built-in or user-defined geometry shader outputs are considered
	per-primitive in a passthrough geometry shader, where a single output value
	is copied to all output vertices.

	The remainder of this section details the usage of the code:PassthroughNV
	decoration and modifications to the interface matching rules when using
	passthrough geometry shaders.


	[[geometry-passthrough-passthrough]]
	=== code:PassthroughNV Decoration

	Decorating a geometry shader input variable with the code:PassthroughNV
	decoration indicates that values of this input are copied through to the
	corresponding vertex of the output primitive.
	Input variables and block members which do not have the code:PassthroughNV
	decoration are consumed by the geometry shader without being passed through
	to subsequent stages.

	The code:PassthroughNV decoration must: only be used within a geometry
	shader.

	Any variable decorated with code:PassthroughNV must: be declared using the
	code:Input storage class.

	The code:PassthroughNV decoration must: not be used with any of:

	* an input primitive type other than code:InputPoints, code:InputLines, or
	code:Triangles, as specified by the mode for code:OpExecutionMode.
	* an invocation count other than one, as specified by the code:Invocations
	mode for code:OpExecutionMode.
	* an code:OpEntryPoint which statically uses the code:OpEmitVertex or
	code:OpEndPrimitive instructions.
	* a variable decorated with the code:InvocationId built-in decoration.
	* a variable decorated with the code:PrimitiveId built-in decoration that
	is declared using the code:Input storage class.


	[[geometry-passthrough-interface]]
	=== Passthrough Interface Matching

	When a passthrough geometry shader is in use, the
	<<interfaces-iointerfaces-matching,Interface Matching>> rules involving the
	geometry shader input and output interfaces operate as described in this
	section.

	For the purposes of matching passthrough geometry shader inputs with outputs
	of the previous pipeline stages, the code:PassthroughNV decoration is
	ignored.

	For the purposes of matching the outputs of the geometry shader with
	subsequent pipeline stages, each input variable with the code:PassthroughNV
	decoration is considered to add an equivalent output variable with the same
	type, decoration (other than code:PassthroughNV), number, and declaration
	order on the output interface.
	The output variable declaration corresponding to an input variable decorated
	with code:PassthroughNV will be identical to the input declaration, except
	that the outermost array dimension of such variables is removed.
	The output block declaration corresponding to an input block decorated with
	code:PassthroughNV or having members decorated with code:PassthroughNV will
	be identical to the input declaration, except that the outermost array
	dimension of such declaration is removed.

	If an input block is decorated with code:PassthroughNV, the equivalent
	output block contains all the members of the input block.
	Otherwise, the equivalent output block contains only those input block
	members decorated with code:PassthroughNV.
	All members of the corresponding output block are assigned code:Location and
	code:Component decorations identical to those assigned to the corresponding
	input block members.

	Output variables and blocks generated from inputs decorated with
	code:PassthroughNV will only exist for the purposes of interface matching;
	these declarations are not available to geometry shader code or listed in
	the module interface.

	For the purposes of component counting, passthrough geometry shaders count
	all statically used input variable components declared with the
	code:PassthroughNV decoration as output components as well, since their
	values will be copied to the output primitive produced by the geometry
	shader.

	endif::VK_NV_geometry_shader_passthrough[]