registry/vulkan/chapters/drawing.txt

// Copyright 2015-2021 The Khronos Group, Inc.
//
// SPDX-License-Identifier: CC-BY-4.0

[[drawing]]
= Drawing Commands

_Drawing commands_ (commands with ftext:Draw in the name) provoke work in a
graphics pipeline.
Drawing commands are recorded into a command buffer and when executed by a
queue, will produce work which executes according to the bound graphics
pipeline.
A graphics pipeline must: be bound to a command buffer before any drawing
commands are recorded in that command buffer.

[open,refpage='VkPipelineInputAssemblyStateCreateInfo',desc='Structure specifying parameters of a newly created pipeline input assembly state',type='structs']
--
ifdef::VK_NV_mesh_shader[]
Drawing can be achieved in two modes:

  * <<drawing-mesh-shading,Programmable Mesh Shading>>, the mesh shader
    assembles primitives, or
  * <<drawing-primitive-shading,Programmable Primitive Shading>>, the input
    primitives are assembled

as follows.
endif::VK_NV_mesh_shader[]

Each draw is made up of zero or more vertices and zero or more instances,
which are processed by the device and result in the assembly of primitives.
Primitives are assembled according to the pname:pInputAssemblyState member
of the slink:VkGraphicsPipelineCreateInfo structure, which is of type
sname:VkPipelineInputAssemblyStateCreateInfo:

include::{generated}/api/structs/VkPipelineInputAssemblyStateCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to a structure extending this
    structure.
  * pname:flags is reserved for future use.
  * pname:topology is a elink:VkPrimitiveTopology defining the primitive
    topology, as described below.
  * pname:primitiveRestartEnable controls whether a special vertex index
    value is treated as restarting the assembly of primitives.
    This enable only applies to indexed draws (flink:vkCmdDrawIndexed,
ifdef::VK_EXT_multi_draw[]
    flink:vkCmdDrawMultiIndexedEXT,
endif::VK_EXT_multi_draw[]
    and flink:vkCmdDrawIndexedIndirect), and the special index value is
    either 0xFFFFFFFF when the pname:indexType parameter of
    fname:vkCmdBindIndexBuffer is equal to ename:VK_INDEX_TYPE_UINT32,
ifdef::VK_EXT_index_type_uint8[]
    0xFF when pname:indexType is equal to ename:VK_INDEX_TYPE_UINT8_EXT,
endif::VK_EXT_index_type_uint8[]
    or 0xFFFF when pname:indexType is equal to ename:VK_INDEX_TYPE_UINT16.
ifndef::VK_EXT_primitive_topology_list_restart[]
    Primitive restart is not allowed for "`list`" topologies.
endif::VK_EXT_primitive_topology_list_restart[]
ifdef::VK_EXT_primitive_topology_list_restart[]
    Primitive restart is not allowed for "`list`" topologies, unless one of
    the features
    <<features-primitiveTopologyPatchListRestart,pname:primitiveTopologyPatchListRestart>>
    (for ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST) or
    <<features-primitiveTopologyListRestart,pname:primitiveTopologyListRestart>>
    (for all other list topologies) is enabled.
endif::VK_EXT_primitive_topology_list_restart[]

Restarting the assembly of primitives discards the most recent index values
if those elements formed an incomplete primitive, and restarts the primitive
assembly using the subsequent indices, but only assembling the immediately
following element through the end of the originally specified elements.
The primitive restart index value comparison is performed before adding the
pname:vertexOffset value to the index value.

.Valid Usage
****
ifndef::VK_EXT_primitive_topology_list_restart[]
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-topology-00428]]
    If pname:topology is ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY,
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY or
    ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST, pname:primitiveRestartEnable
    must: be ename:VK_FALSE
endif::VK_EXT_primitive_topology_list_restart[]
ifdef::VK_EXT_primitive_topology_list_restart[]
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-topology-06252]]
    If pname:topology is ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY or
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, and
    pname:primitiveRestartEnable is ename:VK_TRUE, the
    <<features-primitiveTopologyListRestart,pname:primitiveTopologyListRestart>>
    feature must: be enabled
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-topology-06253]]
    If pname:topology is ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST, and
    pname:primitiveRestartEnable is ename:VK_TRUE, the
    <<features-primitiveTopologyPatchListRestart,pname:primitiveTopologyPatchListRestart>>
    feature must: be enabled
endif::VK_EXT_primitive_topology_list_restart[]
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-topology-00429]]
    If the <<features-geometryShader,geometry shaders>> feature is not
    enabled, pname:topology must: not be any of
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY,
    ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY,
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY or
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-topology-00430]]
    If the <<features-tessellationShader,tessellation shaders>> feature is
    not enabled, pname:topology must: not be
    ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST
ifdef::VK_KHR_portability_subset[]
  * [[VUID-VkPipelineInputAssemblyStateCreateInfo-triangleFans-04452]]
    If the `apiext:VK_KHR_portability_subset` extension is enabled, and
    slink:VkPhysicalDevicePortabilitySubsetFeaturesKHR::pname:triangleFans
    is ename:VK_FALSE, pname:topology must: not be
    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN
endif::VK_KHR_portability_subset[]
****

include::{generated}/validity/structs/VkPipelineInputAssemblyStateCreateInfo.txt[]
--

[open,refpage='VkPipelineInputAssemblyStateCreateFlags',desc='Reserved for future use',type='flags']
--
include::{generated}/api/flags/VkPipelineInputAssemblyStateCreateFlags.txt[]

tname:VkPipelineInputAssemblyStateCreateFlags is a bitmask type for setting
a mask, but is currently reserved for future use.
--

ifdef::VK_EXT_extended_dynamic_state2[]
[open,refpage='vkCmdSetPrimitiveRestartEnableEXT',desc='Set primitive assembly restart state dynamically for a command buffer',type='protos']
--
To <<pipelines-dynamic-state, dynamically control>> whether a special vertex
index value is treated as restarting the assembly of primitives, call:

include::{generated}/api/protos/vkCmdSetPrimitiveRestartEnableEXT.txt[]

  * pname:commandBuffer is the command buffer into which the command will be
    recorded.
  * pname:primitiveRestartEnable controls whether a special vertex index
    value is treated as restarting the assembly of primitives.
    It behaves in the same way as
    sname:VkPipelineInputAssemblyStateCreateInfo::pname:primitiveRestartEnable

This command sets the primitive restart enable for subsequent drawing
commands when the graphics pipeline is created with
ename:VK_DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE_EXT set in
slink:VkPipelineDynamicStateCreateInfo::pname:pDynamicStates.
Otherwise, this state is specified by the
slink:VkPipelineInputAssemblyStateCreateInfo::pname:primitiveRestartEnable
value used to create the currently active pipeline.

.Valid Usage
****
  * [[VUID-vkCmdSetPrimitiveRestartEnableEXT-None-04866]]
    The <<features-extendedDynamicState2, extendedDynamicState2>> feature
    must: be enabled
****

include::{generated}/validity/protos/vkCmdSetPrimitiveRestartEnableEXT.txt[]
--
endif::VK_EXT_extended_dynamic_state2[]


[[drawing-primitive-topologies]]
== Primitive Topologies

_Primitive topology_ determines how consecutive vertices are organized into
primitives, and determines the type of primitive that is used at the
beginning of the graphics pipeline.
The effective topology for later stages of the pipeline is altered by
tessellation or geometry shading (if either is in use) and depends on the
execution modes of those shaders.
ifdef::VK_NV_mesh_shader[]
In the case of mesh shading the only effective topology is defined by the
execution mode of the mesh shader.
endif::VK_NV_mesh_shader[]

[open,refpage='VkPrimitiveTopology',desc='Supported primitive topologies',type='enums']
--
The primitive topologies defined by elink:VkPrimitiveTopology are:

include::{generated}/api/enums/VkPrimitiveTopology.txt[]

  * ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST specifies a series of
    <<drawing-point-lists,separate point primitives>>.
  * ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST specifies a series of
    <<drawing-line-lists,separate line primitives>>.
  * ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP specifies a series of
    <<drawing-line-strips,connected line primitives>> with consecutive lines
    sharing a vertex.
  * ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST specifies a series of
    <<drawing-triangle-lists,separate triangle primitives>>.
  * ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP specifies a series of
    <<drawing-triangle-strips,connected triangle primitives>> with
    consecutive triangles sharing an edge.
  * ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN specifies a series of
    <<drawing-triangle-fans,connected triangle primitives>> with all
    triangles sharing a common vertex.
ifdef::VK_KHR_portability_subset[]
    If the `apiext:VK_KHR_portability_subset` extension is enabled, and
    slink:VkPhysicalDevicePortabilitySubsetFeaturesKHR::pname:triangleFans
    is ename:VK_FALSE, then triangle fans are not supported by the
    implementation, and ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN must: not
    be used.
endif::VK_KHR_portability_subset[]
  * ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY specifies a series
    of <<drawing-line-lists-with-adjacency,separate line primitives with
    adjacency>>.
  * ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY specifies a series
    of <<drawing-line-strips-with-adjacency,connected line primitives with
    adjacency>>, with consecutive primitives sharing three vertices.
  * ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY specifies a
    series of <<drawing-triangle-lists-with-adjacency,separate triangle
    primitives with adjacency>>.
  * ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY specifies
    <<drawing-triangle-strips-with-adjacency,connected triangle primitives
    with adjacency>>, with consecutive triangles sharing an edge.
  * ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST specifies
    <<drawing-patch-lists,separate patch primitives>>.

Each primitive topology, and its construction from a list of vertices, is
described in detail below with a supporting diagram, according to the
following key:

[cols="1,2,9"]
|====
^.^| image:{images}/primitive_topology_key_vertex.svg[pdfwidth=6pt,align="center",opts="{imageopts}"]
.^| Vertex
| A point in 3-dimensional space.
  Positions chosen within the diagrams are arbitrary and for
  illustration only.

^.^| image:{images}/primitive_topology_key_vertex_number.svg[pdfwidth=6pt,align="center",opts="{imageopts}"]
.^| Vertex Number
| Sequence position of a vertex within the provided vertex data.

^.^| image:{images}/primitive_topology_key_provoking_vertex.svg[pdfwidth=30pt,align="center",opts="{imageopts}"]
.^| Provoking Vertex
| Provoking vertex within the main primitive.
  The tail is angled towards the relevant primitive.
  Used in <<vertexpostproc-flatshading, flat shading>>.

^.^| image:{images}/primitive_topology_key_edge.svg[pdfwidth=30pt,align="center",opts="{imageopts}"]
.^| Primitive Edge
| An edge connecting the points of a main primitive.

^.^| image:{images}/primitive_topology_key_adjacency_edge.svg[pdfwidth=30pt,align="center",opts="{imageopts}"]
.^| Adjacency Edge
| Points connected by these lines do not contribute to a main primitive,
  and are only accessible in a <<geometry,geometry shader>>.

^.^| image:{images}/primitive_topology_key_winding_order.svg[pdfwidth=30pt,align="center",opts="{imageopts}"]
.^| Winding Order
| The relative order in which vertices are defined within a primitive,
  used in the <<primsrast-polygons-basic,facing determination>>.
  This ordering has no specific start or end point.
|====

The diagrams are supported with mathematical definitions where the vertices
([eq]#v#) and primitives ([eq]#p#) are numbered starting from [eq]#0#;
[eq]#v~0~# is the first vertex in the provided data and [eq]#p~0~# is the
first primitive in the set of primitives defined by the vertices and
topology.
--

ifdef::VK_EXT_extended_dynamic_state[]
[open,refpage='vkCmdSetPrimitiveTopologyEXT',desc='Set primitive topology state dynamically for a command buffer',type='protos']
--
To <<pipelines-dynamic-state, dynamically set>> primitive topology, call:

include::{generated}/api/protos/vkCmdSetPrimitiveTopologyEXT.txt[]

  * pname:commandBuffer is the command buffer into which the command will be
    recorded.
  * pname:primitiveTopology specifies the primitive topology to use for
    drawing.

This command sets the primitive topology for subsequent drawing commands
when the graphics pipeline is created with
ename:VK_DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT set in
slink:VkPipelineDynamicStateCreateInfo::pname:pDynamicStates.
Otherwise, this state is specified by the
slink:VkPipelineInputAssemblyStateCreateInfo::pname:topology value used to
create the currently active pipeline.

.Valid Usage
****
  * [[VUID-vkCmdSetPrimitiveTopologyEXT-None-03347]]
    The <<features-extendedDynamicState, extendedDynamicState>> feature
    must: be enabled
****

include::{generated}/validity/protos/vkCmdSetPrimitiveTopologyEXT.txt[]
--


[[drawing-primitive-topology-class]]
=== Topology Class

The primitive topologies are grouped into the following topology classes:

[[topology-classes]]
.Topology classes
[options="header"]
|===
| Topology Class  | Primitive Topology
| Point           | ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST
| Line            | ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST,
                    ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP,
                    ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY,
                    ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY
| Triangle        | ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
                    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP,
                    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN,
                    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY,
                    ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY
| Patch           | ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST
|===
endif::VK_EXT_extended_dynamic_state[]


[[drawing-point-lists]]
=== Point Lists

When the topology is ename:VK_PRIMITIVE_TOPOLOGY_POINT_LIST, each
consecutive vertex defines a single point primitive, according to the
equation:

  {empty}:: [eq]#p~i~ = {v~i~}#

As there is only one vertex, that vertex is the provoking vertex.
The number of primitives generated is equal to [eq]#pname:vertexCount#.

image::{images}/primitive_topology_point_list.svg[align="center",opts="{imageopts}"]


[[drawing-line-lists]]
=== Line Lists

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST, each
consecutive pair of vertices defines a single line primitive, according to
the equation:

  {empty}:: [eq]#p~i~ = {v~2i~, v~2i+1~}#

The number of primitives generated is equal to
[eq]#{lfloor}pname:vertexCount/2{rfloor}#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~2i~#.

image::{images}/primitive_topology_line_list.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~2i+1~#.

image::{images}/primitive_topology_line_list_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-line-strips]]
=== Line Strips

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP, one
line primitive is defined by each vertex and the following vertex, according
to the equation:

  {empty}:: [eq]#p~i~ = {v~i~, v~i+1~}#

The number of primitives generated is equal to
[eq]#max(0,pname:vertexCount-1)#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~i~#.

image::{images}/primitive_topology_line_strip.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~i+1~#.

image::{images}/primitive_topology_line_strip_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-triangle-lists]]
=== Triangle Lists

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST,
each consecutive set of three vertices defines a single triangle primitive,
according to the equation:

  {empty}:: [eq]#p~i~ = {v~3i~, v~3i+1~, v~3i+2~}#

The number of primitives generated is equal to
[eq]#{lfloor}pname:vertexCount/3{rfloor}#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~3i~#.

image::{images}/primitive_topology_triangle_list.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~3i+2~#.

image::{images}/primitive_topology_triangle_list_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-triangle-strips]]
=== Triangle Strips

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP,
one triangle primitive is defined by each vertex and the two vertices that
follow it, according to the equation:

  {empty}:: [eq]#p~i~ = {v~i~, v~i+(1+i%2)~, v~i+(2-i%2)~}#

The number of primitives generated is equal to
[eq]#max(0,pname:vertexCount-2)#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~i~#.

image::{images}/primitive_topology_triangle_strip.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~i+2~#.

image::{images}/primitive_topology_triangle_strip_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]

[NOTE]
.Note
====
The ordering of the vertices in each successive triangle is reversed, so
that the winding order is consistent throughout the strip.
====


[[drawing-triangle-fans]]
=== Triangle Fans

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN,
triangle primitives are defined around a shared common vertex, according to
the equation:

  {empty}:: [eq]#p~i~ = {v~i+1~, v~i+2~, v~0~}#

The number of primitives generated is equal to
[eq]#max(0,pname:vertexCount-2)#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~i+1~#.

image::{images}/primitive_topology_triangle_fan.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~i+2~#.

image::{images}/primitive_topology_triangle_fan_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]

ifdef::VK_KHR_portability_subset[]
[NOTE]
.Note
====
If the `apiext:VK_KHR_portability_subset` extension is enabled, and
slink:VkPhysicalDevicePortabilitySubsetFeaturesKHR::pname:triangleFans is
ename:VK_FALSE, then triangle fans are not supported by the implementation,
and ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN must: not be used.
====
endif::VK_KHR_portability_subset[]


[[drawing-line-lists-with-adjacency]]
=== Line Lists With Adjacency

When the primitive topology is
ename:VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY, each consecutive set
of four vertices defines a single line primitive with adjacency, according
to the equation:

  {empty}:: [eq]#p~i~ = {v~4i~, v~4i+1~, v~4i+2~,v~4i+3~}#

A line primitive is described by the second and third vertices of the total
primitive, with the remaining two vertices only accessible in a
<<geometry,geometry shader>>.

The number of primitives generated is equal to
[eq]#{lfloor}pname:vertexCount/4{rfloor}#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~4i+1~#.

image::{images}/primitive_topology_line_list_with_adjacency.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~4i+2~#.

image::{images}/primitive_topology_line_list_with_adjacency_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-line-strips-with-adjacency]]
=== Line Strips With Adjacency

When the primitive topology is
ename:VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY, one line primitive
with adjacency is defined by each vertex and the following vertex, according
to the equation:

  {empty}:: [eq]#p~i~ = {v~i~, v~i+1~, v~i+2~, v~i+3~}#

A line primitive is described by the second and third vertices of the total
primitive, with the remaining two vertices only accessible in a
<<geometry,geometry shader>>.

The number of primitives generated is equal to
[eq]#max(0,pname:vertexCount-3)#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~i+1~#.

image::{images}/primitive_topology_line_strip_with_adjacency.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~i+2~#.

image::{images}/primitive_topology_line_strip_with_adjacency_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-triangle-lists-with-adjacency]]
=== Triangle Lists With Adjacency

When the primitive topology is
ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY, each consecutive
set of six vertices defines a single triangle primitive with adjacency,
according to the equations:

  {empty}:: [eq]#p~i~ = {v~6i~, v~6i+1~, v~6i+2~, v~6i+3~, v~6i+4~,
            v~6i+5~}#

A triangle primitive is described by the first, third, and fifth vertices of
the total primitive, with the remaining three vertices only accessible in a
<<geometry,geometry shader>>.

The number of primitives generated is equal to
[eq]#{lfloor}pname:vertexCount/6{rfloor}#.

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is [eq]#v~6i~#.

image::{images}/primitive_topology_triangle_list_with_adjacency.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is [eq]#v~6i+4~#.

image::{images}/primitive_topology_triangle_list_with_adjacency_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-triangle-strips-with-adjacency]]
=== Triangle Strips With Adjacency

When the primitive topology is
ename:VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY, one triangle
primitive with adjacency is defined by each vertex and the following 5
vertices.

The number of primitives generated, [eq]#n#, is equal to [eq]#{lfloor}max(0,
pname:vertexCount - 4)/2{rfloor}#.

If [eq]#n=1#, the primitive is defined as:

  {empty}:: [eq]#p = {v~0~, v~1~, v~2~, v~5~, v~4~, v~3~}#

If [eq]#n>1#, the total primitive consists of different vertices according
to where it is in the strip:

  {empty}:: [eq]#p~i~ = {v~2i~, v~2i+1~, v~2i+2~, v~2i+6~, v~2i+4~,
            v~2i+3~}# when [eq]#i=0#
  {empty}:: [eq]#p~i~ = {v~2i~, v~2i+3~, v~2i+4~, v~2i+6~, v~2i+2~,
            v~2i-2~}# when [eq]#i>0#, [eq]#i<n-1#, and [eq]#i%2=1#
  {empty}:: [eq]#p~i~ = {v~2i~, v~2i-2~, v~2i+2~, v~2i+6~, v~2i+4~,
            v~2i+3~}# when [eq]#i>0#, [eq]#i<n-1#, and [eq]#i%2=0#
  {empty}:: [eq]#p~i~ = {v~2i~, v~2i+3~, v~2i+4~, v~2i+5~, v~2i+2~,
            v~2i-2~}# when [eq]#i=n-1# and [eq]#i%2=1#
  {empty}:: [eq]#p~i~ = {v~2i~, v~2i-2~, v~2i+2~, v~2i+5~, v~2i+4~,
            v~2i+3~}# when [eq]#i=n-1# and [eq]#i%2=0#

A triangle primitive is described by the first, third, and fifth vertices of
the total primitive in all cases, with the remaining three vertices only
accessible in a <<geometry,geometry shader>>.

[NOTE]
.Note
====
The ordering of the vertices in each successive triangle is altered so that
the winding order is consistent throughout the strip.
====

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_FIRST_VERTEX_EXT, the
endif::VK_EXT_provoking_vertex[]
ifndef::VK_EXT_provoking_vertex[]
The
endif::VK_EXT_provoking_vertex[]
provoking vertex for [eq]#p~i~# is always [eq]#v~2i~#.

image::{images}/primitive_topology_triangle_strip_with_adjacency.svg[align="center",opts="{imageopts}"]

ifdef::VK_EXT_provoking_vertex[]
When the pname:provokingVertexMode is
ename:VK_PROVOKING_VERTEX_MODE_LAST_VERTEX_EXT, the provoking vertex for
[eq]#p~i~# is always [eq]#v~2i+4~#.

image::{images}/primitive_topology_triangle_strip_with_adjacency_last.svg[align="center",opts="{imageopts}"]
endif::VK_EXT_provoking_vertex[]


[[drawing-patch-lists]]
=== Patch Lists

When the primitive topology is ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST, each
consecutive set of [eq]#m# vertices defines a single patch primitive,
according to the equation:

  {empty}:: [eq]#p~i~ = {v~mi~, v~mi+1~, ..., v~mi+(m-2)~, v~mi+(m-1)~}#

where [eq]#m# is equal to
slink:VkPipelineTessellationStateCreateInfo::pname:patchControlPoints.

Patch lists are never passed to <<vertexpostproc, vertex post-processing>>,
and as such no provoking vertex is defined for patch primitives.
The number of primitives generated is equal to
[eq]#{lfloor}pname:vertexCount/m{rfloor}#.

The vertices comprising a patch have no implied geometry, and are used as
inputs to tessellation shaders and the fixed-function tessellator to
generate new point, line, or triangle primitives.


[[drawing-primitive-order]]
== Primitive Order

Primitives generated by <<drawing, drawing commands>> progress through the
stages of the <<synchronization-pipeline-graphics, graphics pipeline>> in
_primitive order_.
Primitive order is initially determined in the following way:

  . Submission order determines the initial ordering
  . For indirect drawing commands, the order in which accessed instances of
    the slink:VkDrawIndirectCommand are stored in pname:buffer, from lower
    indirect buffer addresses to higher addresses.
  . If a drawing command includes multiple instances, the order in which
    instances are executed, from lower numbered instances to higher.
  . The order in which primitives are specified by a drawing command:
  ** For non-indexed draws, from vertices with a lower numbered
     code:vertexIndex to a higher numbered code:vertexIndex.
  ** For indexed draws, vertices sourced from a lower index buffer addresses
     to higher addresses.
ifdef::VK_NV_mesh_shader[]
  ** For draws using mesh shaders, the order is provided by <<mesh-ordering,
     mesh shading>>.
endif::VK_NV_mesh_shader[]

Within this order implementations further sort primitives:

[start=5]
  . If tessellation shading is active, by an implementation-dependent order
    of new primitives generated by <<tessellation-primitive-order,
    tessellation>>.
  . If geometry shading is active, by the order new primitives are generated
    by <<geometry-ordering, geometry shading>>.
  . If the <<primsrast-polygonmode,polygon mode>> is not
    ename:VK_POLYGON_MODE_FILL,
ifdef::VK_NV_fill_rectangle[]
    or ename:VK_POLYGON_MODE_FILL_RECTANGLE_NV,
endif::VK_NV_fill_rectangle[]
    by an implementation-dependent ordering of the new primitives generated
    within the original primitive.

Primitive order is later used to define <<primsrast-order, rasterization
order>>, which determines the order in which fragments output results to a
framebuffer.


[[drawing-primitive-shading]]
== Programmable Primitive Shading

Once primitives are assembled, they proceed to the vertex shading stage of
the pipeline.
If the draw includes multiple instances, then the set of primitives is sent
to the vertex shading stage multiple times, once for each instance.

It is implementation-dependent whether vertex shading occurs on vertices
that are discarded as part of incomplete primitives, but if it does occur
then it operates as if they were vertices in complete primitives and such
invocations can: have side effects.

Vertex shading receives two per-vertex inputs from the primitive assembly
stage - the code:vertexIndex and the code:instanceIndex.
How these values are generated is defined below, with each command.

Drawing commands fall roughly into two categories:

  * Non-indexed drawing commands present a sequential code:vertexIndex to
    the vertex shader.
    The sequential index is generated automatically by the device (see
    <<fxvertex,Fixed-Function Vertex Processing>> for details on both
    specifying the vertex attributes indexed by code:vertexIndex, as well as
    binding vertex buffers containing those attributes to a command buffer).
    These commands are:
  ** flink:vkCmdDraw
  ** flink:vkCmdDrawIndirect
ifdef::VK_VERSION_1_2[]
  ** flink:vkCmdDrawIndirectCount
endif::VK_VERSION_1_2[]
ifdef::VK_KHR_draw_indirect_count[]
  ** flink:vkCmdDrawIndirectCountKHR
endif::VK_KHR_draw_indirect_count[]
ifdef::VK_AMD_draw_indirect_count[]
  ** flink:vkCmdDrawIndirectCountAMD
endif::VK_AMD_draw_indirect_count[]
ifdef::VK_EXT_multi_draw[]
  ** flink:vkCmdDrawMultiEXT
endif::VK_EXT_multi_draw[]
  * Indexed drawing commands read index values from an _index buffer_ and
    use this to compute the code:vertexIndex value for the vertex shader.
    These commands are:
  ** flink:vkCmdDrawIndexed
  ** flink:vkCmdDrawIndexedIndirect
ifdef::VK_VERSION_1_2[]
  ** flink:vkCmdDrawIndexedIndirectCount
endif::VK_VERSION_1_2[]
ifdef::VK_KHR_draw_indirect_count[]
  ** flink:vkCmdDrawIndexedIndirectCountKHR
endif::VK_KHR_draw_indirect_count[]
ifdef::VK_AMD_draw_indirect_count[]
  ** flink:vkCmdDrawIndexedIndirectCountAMD
endif::VK_AMD_draw_indirect_count[]
ifdef::VK_EXT_multi_draw[]
  ** flink:vkCmdDrawMultiIndexedEXT
endif::VK_EXT_multi_draw[]


[open,refpage='vkCmdBindIndexBuffer',desc='Bind an index buffer to a command buffer',type='protos']
--
To bind an index buffer to a command buffer, call:

include::{generated}/api/protos/vkCmdBindIndexBuffer.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:buffer is the buffer being bound.
  * pname:offset is the starting offset in bytes within pname:buffer used in
    index buffer address calculations.
  * pname:indexType is a elink:VkIndexType value specifying the size of the
    indices.

.Valid Usage
****
  * [[VUID-vkCmdBindIndexBuffer-offset-00431]]
    pname:offset must: be less than the size of pname:buffer
  * [[VUID-vkCmdBindIndexBuffer-offset-00432]]
    The sum of pname:offset and the address of the range of
    sname:VkDeviceMemory object that is backing pname:buffer, must: be a
    multiple of the type indicated by pname:indexType
  * [[VUID-vkCmdBindIndexBuffer-buffer-00433]]
    pname:buffer must: have been created with the
    ename:VK_BUFFER_USAGE_INDEX_BUFFER_BIT flag
  * [[VUID-vkCmdBindIndexBuffer-buffer-00434]]
    If pname:buffer is non-sparse then it must: be bound completely and
    contiguously to a single sname:VkDeviceMemory object
ifdef::VK_NV_ray_tracing,VK_KHR_acceleration_structure[]
  * [[VUID-vkCmdBindIndexBuffer-indexType-02507]]
    pname:indexType must: not be ename:VK_INDEX_TYPE_NONE_KHR
endif::VK_NV_ray_tracing,VK_KHR_acceleration_structure[]
ifdef::VK_EXT_index_type_uint8[]
  * [[VUID-vkCmdBindIndexBuffer-indexType-02765]]
    If pname:indexType is ename:VK_INDEX_TYPE_UINT8_EXT, the
    <<features-indexTypeUint8,indexTypeUint8>> feature must: be enabled
endif::VK_EXT_index_type_uint8[]
****

include::{generated}/validity/protos/vkCmdBindIndexBuffer.txt[]
--

[open,refpage='VkIndexType',desc='Type of index buffer indices',type='enums']
--
Possible values of flink:vkCmdBindIndexBuffer::pname:indexType, specifying
the size of indices, are:

include::{generated}/api/enums/VkIndexType.txt[]

  * ename:VK_INDEX_TYPE_UINT16 specifies that indices are 16-bit unsigned
    integer values.
  * ename:VK_INDEX_TYPE_UINT32 specifies that indices are 32-bit unsigned
    integer values.
ifdef::VK_NV_ray_tracing,VK_KHR_acceleration_structure[]
  * ename:VK_INDEX_TYPE_NONE_KHR specifies that no indices are provided.
endif::VK_NV_ray_tracing,VK_KHR_acceleration_structure[]
ifdef::VK_EXT_index_type_uint8[]
  * ename:VK_INDEX_TYPE_UINT8_EXT specifies that indices are 8-bit unsigned
    integer values.
endif::VK_EXT_index_type_uint8[]
--

The parameters for each drawing command are specified directly in the
command or read from buffer memory, depending on the command.
Drawing commands that source their parameters from buffer memory are known
as _indirect_ drawing commands.

All drawing commands interact with the <<features-robustBufferAccess, Robust
Buffer Access>> feature.

[open,refpage='vkCmdDraw',desc='Draw primitives',type='protos']
--
:refpage: vkCmdDraw

To record a non-indexed draw, call:

include::{generated}/api/protos/vkCmdDraw.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:vertexCount is the number of vertices to draw.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstVertex is the index of the first vertex to draw.
  * pname:firstInstance is the instance ID of the first instance to draw.

When the command is executed, primitives are assembled using the current
primitive topology and pname:vertexCount consecutive vertex indices with the
first code:vertexIndex value equal to pname:firstVertex.
The primitives are drawn pname:instanceCount times with code:instanceIndex
starting with pname:firstInstance and increasing sequentially for each
instance.
The assembled primitives execute the bound graphics pipeline.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_dispatch_nonindirect_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
****

include::{generated}/validity/protos/vkCmdDraw.txt[]
--

[open,refpage='vkCmdDrawIndexed',desc='Draw primitives with indexed vertices',type='protos']
--
:refpage: vkCmdDrawIndexed

To record an indexed draw, call:

include::{generated}/api/protos/vkCmdDrawIndexed.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:indexCount is the number of vertices to draw.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstIndex is the base index within the index buffer.
  * pname:vertexOffset is the value added to the vertex index before
    indexing into the vertex buffer.
  * pname:firstInstance is the instance ID of the first instance to draw.

When the command is executed, primitives are assembled using the current
primitive topology and pname:indexCount vertices whose indices are retrieved
from the index buffer.
The index buffer is treated as an array of tightly packed unsigned integers
of size defined by the flink:vkCmdBindIndexBuffer::pname:indexType parameter
with which the buffer was bound.

The first vertex index is at an offset of [eq]#pname:firstIndex {times}
code:indexSize {plus} pname:offset# within the bound index buffer, where
pname:offset is the offset specified by fname:vkCmdBindIndexBuffer and
code:indexSize is the byte size of the type specified by pname:indexType.
Subsequent index values are retrieved from consecutive locations in the
index buffer.
Indices are first compared to the primitive restart value, then zero
extended to 32 bits (if the code:indexType is
ifdef::VK_EXT_index_type_uint8[]
ename:VK_INDEX_TYPE_UINT8_EXT or
endif::VK_EXT_index_type_uint8[]
ename:VK_INDEX_TYPE_UINT16) and have pname:vertexOffset added to them,
before being supplied as the code:vertexIndex value.

The primitives are drawn pname:instanceCount times with code:instanceIndex
starting with pname:firstInstance and increasing sequentially for each
instance.
The assembled primitives execute the bound graphics pipeline.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_dispatch_nonindirect_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
  * [[VUID-vkCmdDrawIndexed-firstIndex-04932]]
    [eq]#(code:indexSize {times} (pname:firstIndex {plus} pname:indexCount)
    {plus} pname:offset)# must: be less than or equal to the size of the
    bound index buffer, with code:indexSize being based on the type
    specified by pname:indexType, where the index buffer, pname:indexType,
    and pname:offset are specified via fname:vkCmdBindIndexBuffer
****

include::{generated}/validity/protos/vkCmdDrawIndexed.txt[]
--

ifdef::VK_EXT_multi_draw[]
[open,refpage='vkCmdDrawMultiEXT',desc='Draw primitives',type='protos']
--
:refpage: vkCmdDrawMultiEXT

To record an ordered sequence of drawing operations which have no state
changes between them, call:

include::{generated}/api/protos/vkCmdDrawMultiEXT.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:drawCount is the number of draws to execute, and can: be zero.
  * pname:pVertexInfo is a pointer to an array of slink:VkMultiDrawInfoEXT
    with vertex information to be drawn.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstInstance is the instance ID of the first instance to draw.
  * pname:stride is the byte stride between consecutive elements of
    pname:pVertexInfo.

pname:drawCount draws are executed with parameters taken from
pname:pVertexInfo.
The number of draw commands recorded is pname:drawCount, with each command
reading, sequentially, a pname:firstVertex and a pname:vertexCount from
pname:pVertexInfo.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_dispatch_nonindirect_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
  * [[VUID-vkCmdDrawMultiEXT-None-04933]]
    The <<features-multiDraw,multiDraw>> feature must: be enabled
  * [[VUID-vkCmdDrawMultiEXT-drawCount-04934]]
    pname:drawCount must: be less than
    sname:VkPhysicalDeviceMultiDrawPropertiesEXT::pname:maxMultiDrawCount
  * [[VUID-vkCmdDrawMultiEXT-drawCount-04935]]
    If pname:drawCount is greater than zero, pname:pVertexInfo must: be a
    valid pointer to memory containing one or more valid instances of
    slink:VkMultiDrawInfoEXT structures
  * [[VUID-vkCmdDrawMultiEXT-stride-04936]]
    pname:stride must be a multiple of 4
****

include::{generated}/validity/protos/vkCmdDrawMultiEXT.txt[]
--

[open,refpage='vkCmdDrawMultiIndexedEXT',desc='Draw primitives',type='protos']
--
:refpage: vkCmdDrawMultiIndexedEXT

To record an ordered sequence of indexed drawing operations which have no
state changes between them, call:

include::{generated}/api/protos/vkCmdDrawMultiIndexedEXT.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:drawCount is the number of draws to execute, and can: be zero.
  * pname:pIndexInfo is a pointer to an array of
    slink:VkMultiDrawIndexedInfoEXT with index information to be drawn.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstInstance is the instance ID of the first instance to draw.
  * pname:stride is the byte stride between consecutive elements of
    pname:pIndexInfo.
  * pname:pVertexOffset is `NULL` or a pointer to the value added to the
    vertex index before indexing into the vertex buffer.
    When specified, sname:VkMultiDrawIndexedInfoEXT::pname:offset is
    ignored.

pname:drawCount indexed draws are executed with parameters taken from
pname:pIndexInfo.
The number of draw commands recorded is pname:drawCount, with each command
reading, sequentially, a pname:firstIndex and an pname:indexCount from
pname:pIndexInfo.
If pname:pVertexOffset is `NULL`, a pname:vertexOffset is also read from
pname:pIndexInfo, otherwise the value from dereferencing pname:pVertexOffset
is used.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_dispatch_nonindirect_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
  * [[VUID-vkCmdDrawMultiIndexedEXT-None-04937]]
    The <<features-multiDraw,multiDraw>> feature must: be enabled
  * [[VUID-vkCmdDrawMultiIndexedEXT-firstIndex-04938]]
    [eq]#(code:indexSize {times} (pname:firstIndex {plus} pname:indexCount)
    {plus} pname:offset)# must: be less than or equal to the size of the
    bound index buffer, with code:indexSize being based on the type
    specified by pname:indexType, where the index buffer, pname:indexType,
    and pname:offset are specified via fname:vkCmdBindIndexBuffer
  * [[VUID-vkCmdDrawMultiIndexedEXT-drawCount-04939]]
    pname:drawCount must: be less than
    sname:VkPhysicalDeviceMultiDrawPropertiesEXT::pname:maxMultiDrawCount
  * [[VUID-vkCmdDrawMultiIndexedEXT-drawCount-04940]]
    If pname:drawCount is greater than zero, pname:pIndexInfo must: be a
    valid pointer to memory containing one or more valid instances of
    slink:VkMultiDrawIndexedInfoEXT structures
  * [[VUID-vkCmdDrawMultiIndexedEXT-stride-04941]]
    pname:stride must be a multiple of 4
****

include::{generated}/validity/protos/vkCmdDrawMultiIndexedEXT.txt[]
--

[open,refpage='VkMultiDrawInfoEXT',desc='Structure specifying a multi-draw command',type='structs',xrefs='vkCmdDrawMultiEXT']
--

The sname:VkMultiDrawInfoEXT structure is defined as:

include::{generated}/api/structs/VkMultiDrawInfoEXT.txt[]

  * pname:firstVertex is the first vertex to draw.
  * pname:vertexCount is the number of vertices to draw.

The members of sname:VkMultiDrawInfoEXT have the same meaning as the
pname:firstVertex and pname:vertexCount parameters in flink:vkCmdDraw.

include::{generated}/validity/structs/VkMultiDrawInfoEXT.txt[]

--

[open,refpage='VkMultiDrawIndexedInfoEXT',desc='Structure specifying a multi-draw command',type='structs',xrefs='vkCmdDrawMultiIndexedEXT']
--

The sname:VkMultiDrawIndexedInfoEXT structure is defined as:

include::{generated}/api/structs/VkMultiDrawIndexedInfoEXT.txt[]

  * pname:firstIndex is the first index to draw.
  * pname:indexCount is the number of vertices to draw.
  * pname:vertexOffset is the value added to the vertex index before
    indexing into the vertex buffer for indexed multidraws.

The pname:firstIndex, pname:indexCount, and pname:vertexOffset members of
sname:VkMultiDrawIndexedInfoEXT have the same meaning as the
pname:firstIndex, pname:indexCount, and pname:vertexOffset parameters,
respectively, of flink:vkCmdDrawIndexed.

include::{generated}/validity/structs/VkMultiDrawIndexedInfoEXT.txt[]

--
endif::VK_EXT_multi_draw[]

[open,refpage='vkCmdDrawIndirect',desc='Draw primitives with indirect parameters',type='protos']
--
:refpage: vkCmdDrawIndirect

To record a non-indexed indirect drawing command, call:

include::{generated}/api/protos/vkCmdDrawIndirect.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:buffer is the buffer containing draw parameters.
  * pname:offset is the byte offset into pname:buffer where parameters
    begin.
  * pname:drawCount is the number of draws to execute, and can: be zero.
  * pname:stride is the byte stride between successive sets of draw
    parameters.

fname:vkCmdDrawIndirect behaves similarly to flink:vkCmdDraw except that the
parameters are read by the device from a buffer during execution.
pname:drawCount draws are executed by the command, with parameters taken
from pname:buffer starting at pname:offset and increasing by pname:stride
bytes for each successive draw.
The parameters of each draw are encoded in an array of
slink:VkDrawIndirectCommand structures.
If pname:drawCount is less than or equal to one, pname:stride is ignored.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
include::{chapters}/commonvalidity/draw_dispatch_indirect_common.txt[]
include::{chapters}/commonvalidity/draw_indirect_drawcount.txt[]
  * [[VUID-vkCmdDrawIndirect-firstInstance-00478]]
    If the <<features-drawIndirectFirstInstance,drawIndirectFirstInstance>>
    feature is not enabled, all the pname:firstInstance members of the
    sname:VkDrawIndirectCommand structures accessed by this command must: be
    code:0
  * [[VUID-vkCmdDrawIndirect-drawCount-00476]]
    If pname:drawCount is greater than `1`, pname:stride must: be a multiple
    of `4` and must: be greater than or equal to
    code:sizeof(sname:VkDrawIndirectCommand)
  * [[VUID-vkCmdDrawIndirect-drawCount-00487]]
    If pname:drawCount is equal to `1`, [eq]#(pname:offset {plus}
    code:sizeof(slink:VkDrawIndirectCommand))# must: be less than or equal
    to the size of pname:buffer
  * [[VUID-vkCmdDrawIndirect-drawCount-00488]]
    If pname:drawCount is greater than `1`, [eq]#(pname:stride {times}
    (pname:drawCount - 1) {plus} pname:offset {plus}
    code:sizeof(slink:VkDrawIndirectCommand))# must: be less than or equal
    to the size of pname:buffer
****

include::{generated}/validity/protos/vkCmdDrawIndirect.txt[]
--

[open,refpage='VkDrawIndirectCommand',desc='Structure specifying a indirect drawing command',type='structs',xrefs='vkCmdDrawIndirect']
--
The sname:VkDrawIndirectCommand structure is defined as:

include::{generated}/api/structs/VkDrawIndirectCommand.txt[]

  * pname:vertexCount is the number of vertices to draw.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstVertex is the index of the first vertex to draw.
  * pname:firstInstance is the instance ID of the first instance to draw.

The members of sname:VkDrawIndirectCommand have the same meaning as the
similarly named parameters of flink:vkCmdDraw.

.Valid Usage
****
  * [[VUID-VkDrawIndirectCommand-None-00500]]
    For a given vertex buffer binding, any attribute data fetched must: be
    entirely contained within the corresponding vertex buffer binding, as
    described in <<fxvertex-input>>
  * [[VUID-VkDrawIndirectCommand-firstInstance-00501]]
    If the <<features-drawIndirectFirstInstance,drawIndirectFirstInstance>>
    feature is not enabled, pname:firstInstance must: be code:0
****

include::{generated}/validity/structs/VkDrawIndirectCommand.txt[]

--

ifdef::VK_VERSION_1_2,VK_KHR_draw_indirect_count[]
[open,refpage='vkCmdDrawIndirectCount',desc='Draw primitives with indirect parameters and draw count',type='protos',alias='vkCmdDrawIndirectCountKHR vkCmdDrawIndirectCountAMD']
--
:refpage: vkCmdDrawIndirectCount

To record a non-indexed draw call with a draw call count sourced from a
buffer, call:

ifdef::VK_VERSION_1_2[]
include::{generated}/api/protos/vkCmdDrawIndirectCount.txt[]
endif::VK_VERSION_1_2[]

// Jon: conditional logic on connective clauses with 3 forms of the command including VK_VERSION_1_2 needs work.
ifdef::VK_VERSION_1_2+VK_KHR_draw_indirect_count[or the equivalent command]

ifdef::VK_KHR_draw_indirect_count[]
include::{generated}/api/protos/vkCmdDrawIndirectCountKHR.txt[]
endif::VK_KHR_draw_indirect_count[]

ifdef::VK_KHR_draw_indirect_count+VK_AMD_draw_indirect_count[or the equivalent command]

ifdef::VK_AMD_draw_indirect_count[]
include::{generated}/api/protos/vkCmdDrawIndirectCountAMD.txt[]
endif::VK_AMD_draw_indirect_count[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:buffer is the buffer containing draw parameters.
  * pname:offset is the byte offset into pname:buffer where parameters
    begin.
  * pname:countBuffer is the buffer containing the draw count.
  * pname:countBufferOffset is the byte offset into pname:countBuffer where
    the draw count begins.
  * pname:maxDrawCount specifies the maximum number of draws that will be
    executed.
    The actual number of executed draw calls is the minimum of the count
    specified in pname:countBuffer and pname:maxDrawCount.
  * pname:stride is the byte stride between successive sets of draw
    parameters.

fname:vkCmdDrawIndirectCount behaves similarly to flink:vkCmdDrawIndirect
except that the draw count is read by the device from a buffer during
execution.
The command will read an unsigned 32-bit integer from pname:countBuffer
located at pname:countBufferOffset and use this as the draw count.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
include::{chapters}/commonvalidity/draw_dispatch_indirect_common.txt[]
include::{chapters}/commonvalidity/draw_indirect_count_common.txt[]
  * [[VUID-vkCmdDrawIndirectCount-stride-03110]]
    pname:stride must: be a multiple of `4` and must: be greater than or
    equal to sizeof(sname:VkDrawIndirectCommand)
  * [[VUID-vkCmdDrawIndirectCount-maxDrawCount-03111]]
    If pname:maxDrawCount is greater than or equal to `1`,
    [eq]#(pname:stride {times} (pname:maxDrawCount - 1) {plus} pname:offset
    {plus} sizeof(sname:VkDrawIndirectCommand))# must: be less than or equal
    to the size of pname:buffer
  * [[VUID-vkCmdDrawIndirectCount-countBuffer-03121]]
    If the count stored in pname:countBuffer is equal to `1`,
    [eq]#(pname:offset {plus} sizeof(sname:VkDrawIndirectCommand))# must: be
    less than or equal to the size of pname:buffer
  * [[VUID-vkCmdDrawIndirectCount-countBuffer-03122]]
    If the count stored in pname:countBuffer is greater than `1`,
    [eq]#(pname:stride {times} (pname:drawCount - 1) {plus} pname:offset
    {plus} sizeof(sname:VkDrawIndirectCommand))# must: be less than or equal
    to the size of pname:buffer
****

include::{generated}/validity/protos/vkCmdDrawIndirectCount.txt[]

--
endif::VK_VERSION_1_2,VK_KHR_draw_indirect_count[]

[open,refpage='vkCmdDrawIndexedIndirect',desc='Draw primitives with indirect parameters and indexed vertices',type='protos']
--
:refpage: vkCmdDrawIndexedIndirect

To record an indexed indirect drawing command, call:

include::{generated}/api/protos/vkCmdDrawIndexedIndirect.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:buffer is the buffer containing draw parameters.
  * pname:offset is the byte offset into pname:buffer where parameters
    begin.
  * pname:drawCount is the number of draws to execute, and can: be zero.
  * pname:stride is the byte stride between successive sets of draw
    parameters.

fname:vkCmdDrawIndexedIndirect behaves similarly to flink:vkCmdDrawIndexed
except that the parameters are read by the device from a buffer during
execution.
pname:drawCount draws are executed by the command, with parameters taken
from pname:buffer starting at pname:offset and increasing by pname:stride
bytes for each successive draw.
The parameters of each draw are encoded in an array of
slink:VkDrawIndexedIndirectCommand structures.
If pname:drawCount is less than or equal to one, pname:stride is ignored.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
include::{chapters}/commonvalidity/draw_dispatch_indirect_common.txt[]
include::{chapters}/commonvalidity/draw_indirect_drawcount.txt[]
  * [[VUID-vkCmdDrawIndexedIndirect-drawCount-00528]]
    If pname:drawCount is greater than `1`, pname:stride must: be a multiple
    of `4` and must: be greater than or equal to
    code:sizeof(sname:VkDrawIndexedIndirectCommand)
  * [[VUID-vkCmdDrawIndexedIndirect-firstInstance-00530]]
    If the <<features-drawIndirectFirstInstance,drawIndirectFirstInstance>>
    feature is not enabled, all the pname:firstInstance members of the
    sname:VkDrawIndexedIndirectCommand structures accessed by this command
    must: be code:0
  * [[VUID-vkCmdDrawIndexedIndirect-drawCount-00539]]
    If pname:drawCount is equal to `1`, [eq]#(pname:offset {plus}
    code:sizeof(sname:VkDrawIndexedIndirectCommand))# must: be less than or
    equal to the size of pname:buffer
  * [[VUID-vkCmdDrawIndexedIndirect-drawCount-00540]]
    If pname:drawCount is greater than `1`, [eq]#(pname:stride {times}
    (pname:drawCount - 1) {plus} pname:offset {plus}
    code:sizeof(sname:VkDrawIndexedIndirectCommand))# must: be less than or
    equal to the size of pname:buffer
****

include::{generated}/validity/protos/vkCmdDrawIndexedIndirect.txt[]
--

[open,refpage='VkDrawIndexedIndirectCommand',desc='Structure specifying a indexed indirect drawing command',type='structs',xrefs='vkCmdDrawIndexedIndirect']
--
The sname:VkDrawIndexedIndirectCommand structure is defined as:

include::{generated}/api/structs/VkDrawIndexedIndirectCommand.txt[]

  * pname:indexCount is the number of vertices to draw.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstIndex is the base index within the index buffer.
  * pname:vertexOffset is the value added to the vertex index before
    indexing into the vertex buffer.
  * pname:firstInstance is the instance ID of the first instance to draw.

The members of sname:VkDrawIndexedIndirectCommand have the same meaning as
the similarly named parameters of flink:vkCmdDrawIndexed.

.Valid Usage
****
  * [[VUID-VkDrawIndexedIndirectCommand-None-00552]]
    For a given vertex buffer binding, any attribute data fetched must: be
    entirely contained within the corresponding vertex buffer binding, as
    described in <<fxvertex-input>>
  * [[VUID-VkDrawIndexedIndirectCommand-indexSize-00553]]
    [eq]#(code:indexSize {times} (pname:firstIndex {plus} pname:indexCount)
    {plus} pname:offset)# must: be less than or equal to the size of the
    bound index buffer, with code:indexSize being based on the type
    specified by pname:indexType, where the index buffer, pname:indexType,
    and pname:offset are specified via fname:vkCmdBindIndexBuffer
  * [[VUID-VkDrawIndexedIndirectCommand-firstInstance-00554]]
    If the <<features-drawIndirectFirstInstance,drawIndirectFirstInstance>>
    feature is not enabled, pname:firstInstance must: be code:0
****

include::{generated}/validity/structs/VkDrawIndexedIndirectCommand.txt[]
--

ifdef::VK_VERSION_1_2,VK_KHR_draw_indirect_count[]
[open,refpage='vkCmdDrawIndexedIndirectCount',desc='Draw parameters with indirect parameters, indexed vertices, and draw count',type='protos',alias='vkCmdDrawIndexedIndirectCountKHR vkCmdDrawIndexedIndirectCountAMD']
--
:refpage: vkCmdDrawIndexedIndirectCount

To record an indexed draw call with a draw call count sourced from a buffer,
call:

ifdef::VK_VERSION_1_2[]
include::{generated}/api/protos/vkCmdDrawIndexedIndirectCount.txt[]
endif::VK_VERSION_1_2[]

// Jon: conditional logic on connective clauses with 3 forms of the command including VK_VERSION_1_2 needs work.
ifdef::VK_VERSION_1_2+VK_KHR_draw_indirect_count[or the equivalent command]

ifdef::VK_KHR_draw_indirect_count[]
include::{generated}/api/protos/vkCmdDrawIndexedIndirectCountKHR.txt[]
endif::VK_KHR_draw_indirect_count[]

ifdef::VK_KHR_draw_indirect_count+VK_AMD_draw_indirect_count[or the equivalent command]

ifdef::VK_AMD_draw_indirect_count[]
include::{generated}/api/protos/vkCmdDrawIndexedIndirectCountAMD.txt[]
endif::VK_AMD_draw_indirect_count[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:buffer is the buffer containing draw parameters.
  * pname:offset is the byte offset into pname:buffer where parameters
    begin.
  * pname:countBuffer is the buffer containing the draw count.
  * pname:countBufferOffset is the byte offset into pname:countBuffer where
    the draw count begins.
  * pname:maxDrawCount specifies the maximum number of draws that will be
    executed.
    The actual number of executed draw calls is the minimum of the count
    specified in pname:countBuffer and pname:maxDrawCount.
  * pname:stride is the byte stride between successive sets of draw
    parameters.

fname:vkCmdDrawIndexedIndirectCount behaves similarly to
flink:vkCmdDrawIndexedIndirect except that the draw count is read by the
device from a buffer during execution.
The command will read an unsigned 32-bit integer from pname:countBuffer
located at pname:countBufferOffset and use this as the draw count.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
include::{chapters}/commonvalidity/draw_dispatch_indirect_common.txt[]
include::{chapters}/commonvalidity/draw_indirect_count_common.txt[]
  * [[VUID-vkCmdDrawIndexedIndirectCount-stride-03142]]
    pname:stride must: be a multiple of `4` and must: be greater than or
    equal to sizeof(sname:VkDrawIndexedIndirectCommand)
  * [[VUID-vkCmdDrawIndexedIndirectCount-maxDrawCount-03143]]
    If pname:maxDrawCount is greater than or equal to `1`,
    [eq]#(pname:stride {times} (pname:maxDrawCount - 1) {plus} pname:offset
    {plus} sizeof(sname:VkDrawIndexedIndirectCommand))# must: be less than
    or equal to the size of pname:buffer
  * [[VUID-vkCmdDrawIndexedIndirectCount-countBuffer-03153]]
    If count stored in pname:countBuffer is equal to `1`, [eq]#(pname:offset
    {plus} sizeof(sname:VkDrawIndexedIndirectCommand))# must: be less than
    or equal to the size of pname:buffer
  * [[VUID-vkCmdDrawIndexedIndirectCount-countBuffer-03154]]
    If count stored in pname:countBuffer is greater than `1`,
    [eq]#(pname:stride {times} (pname:drawCount - 1) {plus} pname:offset
    {plus} sizeof(sname:VkDrawIndexedIndirectCommand))# must: be less than
    or equal to the size of pname:buffer
****

include::{generated}/validity/protos/vkCmdDrawIndexedIndirectCount.txt[]
--
endif::VK_VERSION_1_2,VK_KHR_draw_indirect_count[]


ifdef::VK_EXT_transform_feedback[]
[[drawing-transform-feedback]]
=== Drawing Transform Feedback

It is possible to draw vertex data that was previously captured during
active <<vertexpostproc-transform-feedback,transform feedback>> by binding
one or more of the transform feedback buffers as vertex buffers.
A pipeline barrier is required between using the buffers as transform
feedback buffers and vertex buffers to ensure all writes to the transform
feedback buffers are visible when the data is read as vertex attributes.
The source access is ename:VK_ACCESS_TRANSFORM_FEEDBACK_WRITE_BIT_EXT and
the destination access is ename:VK_ACCESS_VERTEX_ATTRIBUTE_READ_BIT for the
pipeline stages ename:VK_PIPELINE_STAGE_TRANSFORM_FEEDBACK_BIT_EXT and
ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT respectively.
The value written to the counter buffer by
flink:vkCmdEndTransformFeedbackEXT can: be used to determine the vertex
count for the draw.
A pipeline barrier is required between using the counter buffer for
fname:vkCmdEndTransformFeedbackEXT and fname:vkCmdDrawIndirectByteCountEXT
where the source access is
ename:VK_ACCESS_TRANSFORM_FEEDBACK_COUNTER_WRITE_BIT_EXT and the destination
access is ename:VK_ACCESS_INDIRECT_COMMAND_READ_BIT for the pipeline stages
ename:VK_PIPELINE_STAGE_TRANSFORM_FEEDBACK_BIT_EXT and
ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT respectively.

[open,refpage='vkCmdDrawIndirectByteCountEXT',desc='Draw primitives with indirect parameters where the vertex count is derived from the counter byte value in the counter buffer',type='protos']
--
:refpage: vkCmdDrawIndirectByteCountEXT

To record a non-indexed draw call, where the vertex count is based on a byte
count read from a buffer and the passed in vertex stride parameter, call:

include::{generated}/api/protos/vkCmdDrawIndirectByteCountEXT.txt[]

  * pname:commandBuffer is the command buffer into which the command is
    recorded.
  * pname:instanceCount is the number of instances to draw.
  * pname:firstInstance is the instance ID of the first instance to draw.
  * pname:counterBuffer is the buffer handle from where the byte count is
    read.
  * pname:counterBufferOffset is the offset into the buffer used to read the
    byte count, which is used to calculate the vertex count for this draw
    call.
  * pname:counterOffset is subtracted from the byte count read from the
    pname:counterBuffer at the pname:counterBufferOffset
  * pname:vertexStride is the stride in bytes between each element of the
    vertex data that is used to calculate the vertex count from the counter
    value.
    This value is typically the same value that was used in the graphics
    pipeline state when the transform feedback was captured as the
    code:XfbStride.

When the command is executed, primitives are assembled in the same way as
done with flink:vkCmdDraw except the pname:vertexCount is calculated based
on the byte count read from pname:counterBuffer at offset
pname:counterBufferOffset.
The assembled primitives execute the bound graphics pipeline.

The effective pname:vertexCount is calculated as follows:

[source,c]
~~~~
const uint32_t * counterBufferPtr = (const uint8_t *)counterBuffer.address + counterBufferOffset;
vertexCount = floor(max(0, (*counterBufferPtr - counterOffset)) / vertexStride);
~~~~

The effective pname:firstVertex is zero.

.Valid Usage
****
include::{chapters}/commonvalidity/draw_common.txt[]
include::{chapters}/commonvalidity/draw_vertex_binding.txt[]
  * [[VUID-vkCmdDrawIndirectByteCountEXT-transformFeedback-02287]]
    sname:VkPhysicalDeviceTransformFeedbackFeaturesEXT::pname:transformFeedback
    must: be enabled
  * [[VUID-vkCmdDrawIndirectByteCountEXT-transformFeedbackDraw-02288]]
    The implementation must: support
    sname:VkPhysicalDeviceTransformFeedbackPropertiesEXT::pname:transformFeedbackDraw
  * [[VUID-vkCmdDrawIndirectByteCountEXT-vertexStride-02289]]
    pname:vertexStride must: be greater than 0 and less than or equal to
    slink:VkPhysicalDeviceLimits::pname:maxTransformFeedbackBufferDataStride
  * [[VUID-vkCmdDrawIndirectByteCountEXT-counterBuffer-04567]]
    If pname:counterBuffer is non-sparse then it must: be bound completely
    and contiguously to a single sname:VkDeviceMemory object
  * [[VUID-vkCmdDrawIndirectByteCountEXT-counterBuffer-02290]]
    pname:counterBuffer must: have been created with the
    ename:VK_BUFFER_USAGE_INDIRECT_BUFFER_BIT bit set
  * [[VUID-vkCmdDrawIndirectByteCountEXT-counterBufferOffset-04568]]
    pname:counterBufferOffset must: be a multiple of `4`
ifdef::VK_VERSION_1_1[]
  * [[VUID-vkCmdDrawIndirectByteCountEXT-commandBuffer-02646]]
    pname:commandBuffer must: not be a protected command buffer
endif::VK_VERSION_1_1[]
****

include::{generated}/validity/protos/vkCmdDrawIndirectByteCountEXT.txt[]
--
endif::VK_EXT_transform_feedback[]


ifdef::VK_EXT_conditional_rendering[]
[[drawing-conditional-rendering]]
== Conditional Rendering

Certain rendering commands can: be executed conditionally based on a value
in buffer memory.
These rendering commands are limited to <<drawing,drawing commands>>,
<<dispatch,dispatching commands>>, and clearing attachments with
flink:vkCmdClearAttachments within a conditional rendering block which is
defined by commands flink:vkCmdBeginConditionalRenderingEXT and
flink:vkCmdEndConditionalRenderingEXT.
Other rendering commands remain unaffected by conditional rendering.

[[active-conditional-rendering]]
After beginning conditional rendering, it is considered _active_ within the
command buffer it was called until it is ended with
flink:vkCmdEndConditionalRenderingEXT.

Conditional rendering must: begin and end in the same command buffer.
When conditional rendering is active, a primary command buffer can: execute
secondary command buffers if the <<features-inheritedConditionalRendering,
inherited conditional rendering>> feature is enabled.
For a secondary command buffer to be executed while conditional rendering is
active in the primary command buffer, it must: set the
pname:conditionalRenderingEnable flag of
slink:VkCommandBufferInheritanceConditionalRenderingInfoEXT, as described in
the <<commandbuffers-recording, Command Buffer Recording>> section.

Conditional rendering must: also either begin and end inside the same
subpass of a render pass instance, or must: both begin and end outside of a
render pass instance (i.e. contain entire render pass instances).

[open,refpage='vkCmdBeginConditionalRenderingEXT',desc='Define the beginning of a conditional rendering block',type='protos']
--
To begin conditional rendering, call:

include::{generated}/api/protos/vkCmdBeginConditionalRenderingEXT.txt[]

  * pname:commandBuffer is the command buffer into which this command will
    be recorded.
  * pname:pConditionalRenderingBegin is a pointer to a
    slink:VkConditionalRenderingBeginInfoEXT structure specifying parameters
    of conditional rendering.

.Valid Usage
****
  * [[VUID-vkCmdBeginConditionalRenderingEXT-None-01980]]
    Conditional rendering must: not already be
    <<active-conditional-rendering,active>>
****

include::{generated}/validity/protos/vkCmdBeginConditionalRenderingEXT.txt[]
--

[open,refpage='VkConditionalRenderingBeginInfoEXT',desc='Structure specifying conditional rendering begin information',type='structs']
--
The sname:VkConditionalRenderingBeginInfoEXT structure is defined as:

include::{generated}/api/structs/VkConditionalRenderingBeginInfoEXT.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to a structure extending this
    structure.
  * pname:buffer is a buffer containing the predicate for conditional
    rendering.
  * pname:offset is the byte offset into pname:buffer where the predicate is
    located.
  * pname:flags is a bitmask of tlink:VkConditionalRenderingFlagsEXT
    specifying the behavior of conditional rendering.

If the 32-bit value at pname:offset in pname:buffer memory is zero, then the
rendering commands are discarded, otherwise they are executed as normal.
If the value of the predicate in buffer memory changes while conditional
rendering is active, the rendering commands may: be discarded in an
implementation-dependent way.
Some implementations may latch the value of the predicate upon beginning
conditional rendering while others may read it before every rendering
command.

.Valid Usage
****
  * [[VUID-VkConditionalRenderingBeginInfoEXT-buffer-01981]]
    If pname:buffer is non-sparse then it must: be bound completely and
    contiguously to a single sname:VkDeviceMemory object
  * [[VUID-VkConditionalRenderingBeginInfoEXT-buffer-01982]]
    pname:buffer must: have been created with the
    ename:VK_BUFFER_USAGE_CONDITIONAL_RENDERING_BIT_EXT bit set
  * [[VUID-VkConditionalRenderingBeginInfoEXT-offset-01983]]
    pname:offset must: be less than the size of pname:buffer by at least 32
    bits
  * [[VUID-VkConditionalRenderingBeginInfoEXT-offset-01984]]
    pname:offset must: be a multiple of 4
****

include::{generated}/validity/structs/VkConditionalRenderingBeginInfoEXT.txt[]

--

[open,refpage='VkConditionalRenderingFlagBitsEXT',desc='Specify the behavior of conditional rendering',type='enums']
--
Bits which can: be set in
flink:vkCmdBeginConditionalRenderingEXT::pname:flags specifying the behavior
of conditional rendering are:

include::{generated}/api/enums/VkConditionalRenderingFlagBitsEXT.txt[]

  * ename:VK_CONDITIONAL_RENDERING_INVERTED_BIT_EXT specifies the condition
    used to determine whether to discard rendering commands or not.
    That is, if the 32-bit predicate read from pname:buffer memory at
    pname:offset is zero, the rendering commands are not discarded, and if
    non zero, then they are discarded.
--

[open,refpage='VkConditionalRenderingFlagsEXT',desc='Bitmask of VkConditionalRenderingFlagBitsEXT',type='flags']
--
include::{generated}/api/flags/VkConditionalRenderingFlagsEXT.txt[]

tname:VkConditionalRenderingFlagsEXT is a bitmask type for setting a mask of
zero or more elink:VkConditionalRenderingFlagBitsEXT.
--

[open,refpage='vkCmdEndConditionalRenderingEXT',desc='Define the end of a conditional rendering block',type='protos']
--
To end conditional rendering, call:

include::{generated}/api/protos/vkCmdEndConditionalRenderingEXT.txt[]

  * pname:commandBuffer is the command buffer into which this command will
    be recorded.

Once ended, conditional rendering becomes inactive.

.Valid Usage
****
  * [[VUID-vkCmdEndConditionalRenderingEXT-None-01985]]
    Conditional rendering must: be <<active-conditional-rendering,active>>
  * [[VUID-vkCmdEndConditionalRenderingEXT-None-01986]]
    If conditional rendering was made
    <<active-conditional-rendering,active>> outside of a render pass
    instance, it must: not be ended inside a render pass instance
  * [[VUID-vkCmdEndConditionalRenderingEXT-None-01987]]
    If conditional rendering was made
    <<active-conditional-rendering,active>> within a subpass it must: be
    ended in the same subpass
****

include::{generated}/validity/protos/vkCmdEndConditionalRenderingEXT.txt[]
--
endif::VK_EXT_conditional_rendering[]

ifdef::VK_NV_mesh_shader[]
include::VK_NV_mesh_shader/drawing.txt[]
endif::VK_NV_mesh_shader[]