/*
 *
 *    Copyright (c) 2019-2020 Google LLC.
 *    Copyright (c) 2018 Nest Labs, Inc.
 *    All rights reserved.
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

/**
 *    @file
 *          Defines compile-time configuration values for the Weave Device Layer.
 */


#ifndef WEAVE_DEVICE_CONFIG_H
#define WEAVE_DEVICE_CONFIG_H

/* Include a project-specific configuration file, if defined.
 *
 * An application or module that incorporates the Weave Device Layer can define a project
 * configuration file to override standard Weave configuration with application-specific
 * values.  The project config file is typically located outside the OpenWeave source
 * tree, alongside the source code for the application.
 */
#ifdef WEAVE_DEVICE_PROJECT_CONFIG_INCLUDE
#include WEAVE_DEVICE_PROJECT_CONFIG_INCLUDE
#endif

/* Include a platform-specific configuration file, if defined.
 *
 * A platform configuration file contains overrides to standard Weave Device Layer
 * configuration that are specific to the platform or OS on which Weave is running.
 * It is typically provided as apart of an adaptation layer that adapts OpenWeave
 * to the target environment.  This adaptation layer may be included in the OpenWeave
 * source tree itself or implemented externally.
 */
#ifdef WEAVE_DEVICE_PLATFORM_CONFIG_INCLUDE
#include WEAVE_DEVICE_PLATFORM_CONFIG_INCLUDE
#endif

// -------------------- General Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_WEAVE_TASK_NAME
 *
 * The name of the Weave task.
 */
#ifndef WEAVE_DEVICE_CONFIG_WEAVE_TASK_NAME
#define WEAVE_DEVICE_CONFIG_WEAVE_TASK_NAME "WEAVE"
#endif

/**
 * WEAVE_DEVICE_CONFIG_WEAVE_TASK_STACK_SIZE
 *
 * The size (in bytes) of the Weave task stack.
 */
#ifndef WEAVE_DEVICE_CONFIG_WEAVE_TASK_STACK_SIZE
#define WEAVE_DEVICE_CONFIG_WEAVE_TASK_STACK_SIZE 4096
#endif

/**
 * WEAVE_DEVICE_CONFIG_WEAVE_TASK_PRIORITY
 *
 * The priority of the Weave task.
 */
#ifndef WEAVE_DEVICE_CONFIG_WEAVE_TASK_PRIORITY
#define WEAVE_DEVICE_CONFIG_WEAVE_TASK_PRIORITY 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE
 *
 * The maximum number of events that can be held in the Weave Platform event queue.
 */
#ifndef WEAVE_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE
#define WEAVE_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE 100
#endif

/**
 * WEAVE_DEVICE_CONFIG_SERVICE_DIRECTORY_CACHE_SIZE
 *
 * The size (in bytes) of the service directory cache.
 */
#ifndef WEAVE_DEVICE_CONFIG_SERVICE_DIRECTORY_CACHE_SIZE
#define WEAVE_DEVICE_CONFIG_SERVICE_DIRECTORY_CACHE_SIZE 512
#endif

/**
 * WEAVE_DEVICE_CONFIG_LOG_MESSAGE_MAX_SIZE
 *
 * The maximum size (in bytes) of a debug logging message.
 */
#ifndef WEAVE_DEVICE_CONFIG_LOG_MESSAGE_MAX_SIZE
#define WEAVE_DEVICE_CONFIG_LOG_MESSAGE_MAX_SIZE 256
#endif

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_FACTORY_PROVISIONING
 *
 * Enable the device factory provisioning feature.
 *
 * The factory provisioning feature allows factory or developer-supplied provisioning information
 * to be injected into a device at boot time and automatically stored in persistent storage.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_FACTORY_PROVISIONING
#define WEAVE_DEVICE_CONFIG_ENABLE_FACTORY_PROVISIONING 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_LOG_PROVISIONING_HASH
 *
 * Compute and log a hash of the device's provisioning data on boot.
 *
 * The generated hash value confirms to the form described in the Nest Weave: Factory
 * Provisioning Specification.
 */
#ifndef WEAVE_DEVICE_CONFIG_LOG_PROVISIONING_HASH
#define WEAVE_DEVICE_CONFIG_LOG_PROVISIONING_HASH 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_LOG_PII
 *
 * Log information that could be used to identify a user or device.
 *
 * The default is (!NDEBUG) to ensure logging of sensitive info is not enabled in non-debug
 * contexts.
 */
#ifndef WEAVE_DEVICE_CONFIG_LOG_PII
#define WEAVE_DEVICE_CONFIG_LOG_PII (!NDEBUG)
#endif

// -------------------- Device Identification Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID
 *
 * The Nest-assigned vendor id for the organization responsible for producing the device.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID
#define WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID 9050
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID_DESCRIPTION
 *
 * The vendor-assigned string description for the organization responsible for
 * producing the device.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID_DESCRIPTION
#define WEAVE_DEVICE_CONFIG_DEVICE_VENDOR_ID_DESCRIPTION ""
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID
 *
 * The unique id assigned by the device vendor to identify the product or device type.  This
 * number is scoped to the device vendor id.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID
#define WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID 65279
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID_DESCRIPTION
 *
 * The vendor-assigned string description for the product.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID_DESCRIPTION
#define WEAVE_DEVICE_CONFIG_DEVICE_PRODUCT_ID_DESCRIPTION ""
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEFAULT_DEVICE_PRODUCT_REVISION
 *
 * The default product revision number assigned to the device or product by the device vendor.
 *
 * Product revisions are specific to a particular device vendor and product id, and typically
 * correspond to a revision of the physical device, a change to its packaging, and/or a change
 * to its marketing presentation. This value is generally *not* incremented for device software
 * revisions.
 *
 * This is a default value which is used when a product revision has not been stored in device
 * persistent storage (e.g. by a factory provisioning process).
 */
#ifndef WEAVE_DEVICE_CONFIG_DEFAULT_DEVICE_PRODUCT_REVISION
#define WEAVE_DEVICE_CONFIG_DEFAULT_DEVICE_PRODUCT_REVISION 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
 *
 * A string identifying the firmware revision running on the device.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
#define WEAVE_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION "prerelease"
#endif

/**
 * WEAVE_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC
 *
 * The default amount of time (in whole seconds) that the device will remain in "user selected"
 * mode.  User selected mode is typically initiated by a button press, or other direct interaction
 * by a user.  While in user selected mode, the device will respond to Device Identify Requests
 * that have the UserSelectedMode flag set.
 */
#ifndef WEAVE_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC
#define WEAVE_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC 30
#endif // WEAVE_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC

// -------------------- WiFi Station Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_WIFI_STATION
 *
 * Enable support for a WiFi station interface.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_WIFI_STATION
#define WEAVE_DEVICE_CONFIG_ENABLE_WIFI_STATION 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL
 *
 * The interval at which the Weave platform will attempt to reconnect to the configured WiFi
 * network (in milliseconds).
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL
#define WEAVE_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL 5000
#endif

/**
 * WEAVE_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS
 *
 * The maximum number of networks to return as a result of a NetworkProvisioning:ScanNetworks request.
 */
#ifndef WEAVE_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS
#define WEAVE_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS 10
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT
 *
 * The amount of time (in milliseconds) after which the Weave platform will timeout a WiFi scan
 * operation that hasn't completed.  A value of 0 will disable the timeout logic.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT
#define WEAVE_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT 10000
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT
 *
 * The amount of time (in milliseconds) to wait for Internet connectivity to be established on
 * the device's WiFi station interface during a Network Provisioning TestConnectivity operation.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT
#define WEAVE_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT 30000
#endif

/**
 * WEAVE_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME
 *
 * Name of the WiFi station interface on LwIP-based platforms.
 */
#ifndef WEAVE_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME
#define WEAVE_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME "wl"
#endif

// -------------------- WiFi AP Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_WIFI_AP
 *
 * Enable support for a WiFi AP interface.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_WIFI_AP
#define WEAVE_DEVICE_CONFIG_ENABLE_WIFI_AP 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX
 *
 * A prefix string used in forming the WiFi soft-AP SSID.  The remainder of the SSID
 * consists of the final two bytes of the device's primary WiFi MAC address in hex.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX
#define WEAVE_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX "NEST-"
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_AP_CHANNEL
 *
 * The WiFi channel number to be used by the soft-AP.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_AP_CHANNEL
#define WEAVE_DEVICE_CONFIG_WIFI_AP_CHANNEL 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS
 *
 * The maximum number of stations allowed to connect to the soft-AP.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS
#define WEAVE_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS 4
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL
 *
 * The beacon interval (in milliseconds) for the WiFi soft-AP.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL
#define WEAVE_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL 100
#endif

/**
 * WEAVE_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT
 *
 * The amount of time (in milliseconds) after which the Weave platform will deactivate the soft-AP
 * if it has been idle.
 */
#ifndef WEAVE_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT
#define WEAVE_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT 120000
#endif

/**
 * WEAVE_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME
 *
 * Name of the WiFi AP interface on LwIP-based platforms.
 */
#ifndef WEAVE_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME
#define WEAVE_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME "ap"
#endif

// -------------------- BLE/WoBLE Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_WOBLE
 *
 * Enable support for Weave-over-BLE (WoBLE).
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_WOBLE
#define WEAVE_DEVICE_CONFIG_ENABLE_WOBLE 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_SINGLE_WOBLE_CONNECTION
 *
 * Limit support for Weave-over-BLE (WoBLE) to a single connection.
 * When set, WoBLE advertisements will stop while a WoBLE connection is active.
 */
#ifndef WEAVE_DEVICE_CONFIG_WOBLE_SINGLE_CONNECTION
#define WEAVE_DEVICE_CONFIG_WOBLE_SINGLE_CONNECTION 0
#endif

/**
 * WEAVE_DEVICE_CONFIG_WOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED
 *
 * Automatically disable WoBLE advertising when the device transitions to a fully
 * provisioned state.
 */
#ifndef WEAVE_DEVICE_CONFIG_WOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED
#define WEAVE_DEVICE_CONFIG_WOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED 0
#endif

/**
 * WEAVE_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX
 *
 * A prefix string used in forming the BLE device name.  The remainder of the name
 * consists of the final two bytes of the device's Weave node id in hex.
 *
 * NOTE: The device layer limits the total length of a device name to 16 characters.
 * However, due to other data sent in WoBLE advertise packets, the device name
 * may need to be shorter.
 */
#ifndef WEAVE_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX
#define WEAVE_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX "NEST-"
#endif

/**
 * WEAVE_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL
 *
 * The interval (in units of 0.625ms) at which the device will send BLE advertisements while
 * in fast advertising mode.
 *
 * Defaults to 800 (500ms).
 */
#ifndef WEAVE_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL
#define WEAVE_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL 800
#endif

/**
 * WEAVE_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL
 *
 * The interval (in units of 0.625ms) at which the device will send BLE advertisements while
 * in slow advertisement mode.
 *
 * Defaults to 3200 (20000ms).
 */
#ifndef WEAVE_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL
#define WEAVE_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL 3200
#endif

// -------------------- Time Sync Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_SERVICE_DIRECTORY_TIME_SYNC
 *
 * Enables synchronizing the device real-time clock using information returned during
 * a Weave service end point query.  For any device that uses the Weave service directory
 * to lookup a tunnel server, enabling this option will result in the real time clock being
 * synchronized every time the service tunnel is established.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_SERVICE_DIRECTORY_TIME_SYNC
#define WEAVE_DEVICE_CONFIG_ENABLE_SERVICE_DIRECTORY_TIME_SYNC 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC
 *
 * Enables synchronizing the device's real time clock with a remote Weave Time service
 * using the Weave Time Sync protocol.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC
#define WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_WEAVE_TIME_SERVICE_ENDPOINT_ID
 *
 * Specifies the service endpoint id of the Weave Time Sync service to be used to synchronize time.
 *
 * This value is only meaningful if WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC has
 * been enabled.
 */
#ifndef WEAVE_DEVICE_CONFIG_WEAVE_TIME_SERVICE_ENDPOINT_ID
#define WEAVE_DEVICE_CONFIG_WEAVE_TIME_SERVICE_ENDPOINT_ID 0x18B4300200000005ULL
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEFAULT_TIME_SYNC_INTERVAL
 *
 * Specifies the minimum interval (in seconds) at which the device should synchronize its real time
 * clock with the configured Weave Time Sync server.
 *
 * This value is only meaningful if WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC has
 * been enabled.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEFAULT_TIME_SYNC_INTERVAL
#define WEAVE_DEVICE_CONFIG_DEFAULT_TIME_SYNC_INTERVAL 180
#endif

/**
 * WEAVE_DEVICE_CONFIG_TIME_SYNC_TIMEOUT
 *
 * Specifies the maximum amount of time (in milliseconds) to wait for a response from a
 * Weave Time Sync server.
 *
 * This value is only meaningful if WEAVE_DEVICE_CONFIG_ENABLE_WEAVE_TIME_SERVICE_TIME_SYNC has
 * been enabled.
 */
#ifndef WEAVE_DEVICE_CONFIG_TIME_SYNC_TIMEOUT
#define WEAVE_DEVICE_CONFIG_TIME_SYNC_TIMEOUT 10000
#endif

// -------------------- Service Provisioning Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID
 *
 * Specifies the service endpoint id of the Weave Service Provisioning service.  When a device
 * undergoes service provisioning, this is the endpoint to which it will send its Pair Device
 * to Account request.
 */
#ifndef WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID
#define WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID 0x18B4300200000010ULL
#endif

/**
 * WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT
 *
 * The maximum amount of time (in milliseconds) to wait for service connectivity during the device
 * service provisioning step.  More specifically, this is the maximum amount of time the device will
 * wait for connectivity to be established with the service at the point where the device waiting
 * to send a Pair Device to Account request to the Service Provisioning service.
 */
#ifndef WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT
#define WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT 10000
#endif

/**
 * WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT
 *
 * Specifies the maximum amount of time (in milliseconds) to wait for a response from the Service
 * Provisioning service.
 */
#ifndef WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT
#define WEAVE_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT 10000
#endif

// -------------------- Just-In-Time Provisioning Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_JUST_IN_TIME_PROVISIONING
 *
 * Enable just-in-time provisioning functionality in the Weave Device Layer.
 *
 * When enabled, device creates and uses its ephemeral operational credentials:
 *   - operational device id
 *   - operational device self-signed certificate
 *   - operational device private key
 * When enabled, device also implements certificate provisioning protocol and uses it to obtain
 * service assigned certificate from the Certification Authority Service.
 *
 * Then, device uses these credentials to authenticate and communicate to other Weave nodes.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_JUST_IN_TIME_PROVISIONING
#define WEAVE_DEVICE_CONFIG_ENABLE_JUST_IN_TIME_PROVISIONING 0
#endif

// -------------------- Thread Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_THREAD
 *
 * Enable support for Thread in the Weave Device Layer.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_THREAD
#define WEAVE_DEVICE_CONFIG_ENABLE_THREAD 0
#endif

/**
 * WEAVE_DEVICE_CONFIG_THREAD_TASK_NAME
 *
 * The name of the Thread task.
 */
#ifndef WEAVE_DEVICE_CONFIG_THREAD_TASK_NAME
#define WEAVE_DEVICE_CONFIG_THREAD_TASK_NAME "THREAD"
#endif

/**
 * WEAVE_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE
 *
 * The size (in bytes) of the OpenThread task stack.
 */
#ifndef WEAVE_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE
#define WEAVE_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE 8192
#endif

/**
 * WEAVE_DEVICE_CONFIG_THREAD_TASK_PRIORITY
 *
 * The priority of the OpenThread task.
 */
#ifndef WEAVE_DEVICE_CONFIG_THREAD_TASK_PRIORITY
#define WEAVE_DEVICE_CONFIG_THREAD_TASK_PRIORITY 2
#endif

/**
 * WEAVE_DEVICE_CONFIG_LWIP_THREAD_IF_NAME
 *
 * Name of the Thread interface on LwIP-based platforms.
 */
#ifndef WEAVE_DEVICE_CONFIG_LWIP_THREAD_IF_NAME
#define WEAVE_DEVICE_CONFIG_LWIP_THREAD_IF_NAME "th"
#endif

/**
 * WEAVE_DEVICE_CONFIG_THREAD_IF_MTU
 *
 * Default MTU for Thread interface
 */
#ifndef WEAVE_DEVICE_CONFIG_THREAD_IF_MTU
#define WEAVE_DEVICE_CONFIG_THREAD_IF_MTU 1280
#endif

/**
 * WEAVE_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX
 *
 * A prefix string to be used when forming a default Thread network name.
 */
#ifndef WEAVE_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX
#define WEAVE_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX "NEST-PAN-"
#endif

/**
 * WEAVE_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT
 *
 * The amount of time (in milliseconds) to wait for connectivity with a Thread mesh
 * to be established on during a Network Provisioning TestConnectivity operation.
 */
#ifndef WEAVE_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT
#define WEAVE_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT 30000
#endif

// -------------------- Tunnel Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_LWIP_SERVICE_TUN_IF_NAME
 *
 * Name of the service TUN interface on LwIP-based platforms.
 */
#ifndef WEAVE_DEVICE_CONFIG_LWIP_SERVICE_TUN_IF_NAME
#define WEAVE_DEVICE_CONFIG_LWIP_SERVICE_TUN_IF_NAME "tn"
#endif

// -------------------- Trait Manager Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_TRAIT_MANAGER
 *
 * Enable or disable the Weave Trait Manager.
 *
 * NOTE: The Trait Manager is an experimental feature of the Weave Device Layer.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_TRAIT_MANAGER
#define WEAVE_DEVICE_CONFIG_ENABLE_TRAIT_MANAGER 0
#endif

// -------------------- Test Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY
 *
 * Enables the use of a hard-coded default Weave device id and credentials if no device id
 * is found in Weave NV storage.  The value specifies which of 10 identities, numbered 1 through 10,
 * is to be used.  A value of 0 disables use of a default identity.
 *
 * This option is for testing only and should be disabled in production releases.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY
#define WEAVE_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY 0
#endif

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_FIXED_TUNNEL_SERVER
 *
 * Forces the use of a service tunnel server at a fixed IP address and port.  This
 * bypasses the need for a directory query to the service directory endpoint to
 * determine the tunnel server address.  When enabled, this option allows devices
 * that haven't been service provisioned to establish a service tunnel.
 *
 * When this option is enabled, WEAVE_DEVICE_CONFIG_TUNNEL_SERVER_ADDRESS must
 * be set to the address of the tunnel server.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_FIXED_TUNNEL_SERVER
#define WEAVE_DEVICE_CONFIG_ENABLE_FIXED_TUNNEL_SERVER 0
#endif


/** WEAVE_DEVICE_CONFIG_TUNNEL_SERVER_ADDRESS
 *
 * The address of the server to which the device should establish a service tunnel.
 *
 * This value is only meaningful if WEAVE_DEVICE_CONFIG_ENABLE_FIXED_TUNNEL_SERVER
 * has been enabled.
 *
 * Note: Currently this must be a dot-notation IP address--not a host name.
 */
#ifndef WEAVE_DEVICE_CONFIG_TUNNEL_SERVER_ADDRESS
#define WEAVE_DEVICE_CONFIG_TUNNEL_SERVER_ADDRESS ""
#endif

/**
 * WEAVE_DEVICE_CONFIG_DISABLE_ACCOUNT_PAIRING
 *
 * Disables sending the PairDeviceToAccount request to the service during a RegisterServicePairAccount
 * operation.  When this option is enabled, the device will perform all local operations associated
 * with registering a service, but will not request the service to add the device to the user's account.
 */
#ifndef WEAVE_DEVICE_CONFIG_DISABLE_ACCOUNT_PAIRING
#define WEAVE_DEVICE_CONFIG_DISABLE_ACCOUNT_PAIRING 0
#endif

// -------------------- Network Telemetry Configuration --------------------

/**
 * @def WEAVE_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY
 *
 * @brief
 *   Enable automatically uploading Wi-Fi telemetry via trait on an interval.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY
#define WEAVE_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY (0)
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
 *
 * @brief
 *   Enable automatically uploading minimal Thread telemetry and topology via trait on an interval.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
#define WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY (0)
#endif

#if WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY && !WEAVE_DEVICE_CONFIG_ENABLE_THREAD
#error "If WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY set, then WEAVE_DEVICE_CONFIG_ENABLE_THREAD must also be set."
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL
 *
 * @brief
 *   Enable automatically uploading all Thread telemetry and topology via trait on an interval.
 *   This is suitable for products that have router capability.
 *
 * @note
 *   If set, WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY must also be set.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL
#define WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL (0)
#endif

#if WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL && !WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
#error "If WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL set, then WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY must also be set."
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY
 *
 * @brief
 *   Enable automatically uploading Weave tunnel telemetry via trait on an interval.
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY
#define WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY (0)
#endif

#if WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY && !WEAVE_CONFIG_ENABLE_TUNNELING
#error "If WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY set, then WEAVE_CONFIG_ENABLE_TUNNELING must also be set."
#endif

// Enable Network Telemetry feature if it is enabled for at lease one network.
#define WEAVE_DEVICE_CONFIG_ENABLE_NETWORK_TELEMETRY  (WEAVE_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY || \
                                                       WEAVE_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY || \
                                                       WEAVE_DEVICE_CONFIG_ENABLE_TUNNEL_TELEMETRY)

/**
 *  @def WEAVE_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS
 *
 *  @brief
 *    This sets the default interval at which network telemetry events
 *    will be logged to Weave buffers. This can be overwritten at runtime
 *    with a trait.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS
#define WEAVE_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS 90000
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_DEFAULT_TUNNEL_TELEMETRY_INTERVAL_MS
 *
 *  @brief
 *    This sets the default interval at which Weave tunnel telemetry events
 *    will be logged to Weave buffers.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_DEFAULT_TUNNEL_TELEMETRY_INTERVAL_MS
#define WEAVE_DEVICE_CONFIG_DEFAULT_TUNNEL_TELEMETRY_INTERVAL_MS 300000
#endif

// -------------------- Event Logging Configuration --------------------

/**
 * @def WEAVE_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE
 *
 * @brief
 *   A size, in bytes, of the individual critical event logging buffer.
 *   Note: the critical event buffer must exist.
 */
#ifndef WEAVE_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE
#define WEAVE_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE (1024)
#endif

#if (WEAVE_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE <= 0)
#error "The Prod critical event buffer must exist (WEAVE_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE > 0)"
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_EVENT_LOGGING_PROD_BUFFER_SIZE
 *
 * @brief
 *   A size, in bytes, of the individual production event logging buffer.
 *   Note: the production event buffer must exist.
 */
#ifndef WEAVE_DEVICE_CONFIG_EVENT_LOGGING_PROD_BUFFER_SIZE
#define WEAVE_DEVICE_CONFIG_EVENT_LOGGING_PROD_BUFFER_SIZE (512)
#endif

#if (WEAVE_DEVICE_CONFIG_EVENT_LOGGING_PROD_BUFFER_SIZE <= 0)
#error "The Prod event buffer must exist (WEAVE_DEVICE_CONFIG_EVENT_LOGGING_PROD_BUFFER_SIZE > 0)"
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE
 *
 * @brief
 *   A size, in bytes, of the individual info event logging buffer.
 *   Note: set to 0 to disable info event buffer and all support
 *   for the info level events.
 */
#ifndef WEAVE_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE
#define WEAVE_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE (512)
#endif

/**
 * @def WEAVE_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
 *
 * @brief
 *   A size, in bytes, of the individual debug event logging buffer.
 *   Note: set to 0 to disable debug event buffer and all support
 *   for the debug level events.
 */
#ifndef WEAVE_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
#define WEAVE_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (256)
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH
 *
 *  @brief
 *    The event id counter persisted storage epoch.
 */
#ifndef WEAVE_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH
#define WEAVE_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH   (0x10000)
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_CRIT_EIDC_KEY
 *
 *  @brief
 *    The critical event id counter (eidc) persisted storage key.
 */
#ifndef WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_CRIT_EIDC_KEY
#define WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_CRIT_EIDC_KEY  "crit-eidc"
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_PROD_EIDC_KEY
 *
 *  @brief
 *    The production event id counter (eidc) persisted storage key.
 */
#ifndef WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_PROD_EIDC_KEY
#define WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_PROD_EIDC_KEY  "prod-eidc"
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_INFO_EIDC_KEY
 *
 *  @brief
 *    The info event id counter (eidc) persisted storage key.
 */
#ifndef WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_INFO_EIDC_KEY
#define WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_INFO_EIDC_KEY  "info-eidc"
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_DEBUG_EIDC_KEY
 *
 *  @brief
 *    The debug event id counter (eidc) persisted storage key.
 */
#ifndef WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_DEBUG_EIDC_KEY
#define WEAVE_DEVICE_CONFIG_PERSISTED_STORAGE_DEBUG_EIDC_KEY  "debug-eidc"
#endif

// -------------------- Software Update Manager Configuration --------------------

/**
 * WEAVE_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER
 *
 * Enable or disable the Weave Software Update Manager.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER
#define WEAVE_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER 1
#endif

/**
 * WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN
 *
 * Specifies the size in bytes of the buffer that stores the
 * URI
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN
#define WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN 128
#endif

/**
 * WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID
 *
 * Specifies the service endpoint id of the Weave Software Update service.  When a device
 * attempts software update, this is the endpoint to which it will send its Software Update
 * Query request.
 */
#ifndef WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID
#define WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID 0x18B4300200000002ULL
#endif

/**
 * WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID
 *
 * Specifies the service endpoint id of the Weave File Download service.  When a device
 * attempts file download over BDX, this is the endpoint to which it will send its BDX request.
 */
#ifndef WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID
#define WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID 0x18B4300200000013ULL
#endif

/**
 * WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPOSNE_TIMEOUT
 *
 * Specifies the maximum amount of time (in milliseconds) to wait for a response from a
 * Weave Software Update service.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPOSNE_TIMEOUT
#define WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPOSNE_TIMEOUT 10000
#endif

/**
 * WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_RESPOSNE_TIMEOUT
 *
 * Specifies the maximum amount of time (in milliseconds) to wait for a response from a
 * Weave File Download service.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_RESPOSNE_TIMEOUT
#define WEAVE_DEVICE_CONFIG_FILE_DOWNLOAD_RESPOSNE_TIMEOUT 10000
#endif

/**
 * WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES
 *
 * Specifies the maximum number of times a failed software is retried.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES
#define WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES 5
#endif

/**
 * WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS
 *
 * If scheduled software update check is disabled & default retry policy is used,
 * specify the max wait time interval to be used (in milliseconds)
 */
#ifndef WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS
#define WEAVE_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS 1*60*60*1000 // 1 hour
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP
 *
 *  @brief
 *    If default software update retry policy is used,
 *    specify the minimum wait
 *    time as a percentage of the max wait interval for that step.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP
#define WEAVE_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP 50
#endif

/**
 *  @def WEAVE_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS
 *
 *  @brief
 *    If default software update retry policy is used,
 *    specify the multiplier that multiplies the result of a Fibonacci computation
 *    based on a specific index to provide a max wait time for
 *    a step.
 *
 */
#ifndef WEAVE_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS
#define WEAVE_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS 1*60*1000	// 1 minute
#endif

/**
 * WEAVE_DEVICE_CONFIG_SWU_BDX_BLOCK_SIZE
 *
 * Specifies the block size to be used during software download over BDX.
 */
#define WEAVE_DEVICE_CONFIG_SWU_BDX_BLOCK_SIZE		1024

#endif // WEAVE_DEVICE_CONFIG_H